2026-03-13 13:06:17,993 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-03-13 13:06:19,184 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260309_002.tm 2026-03-13 13:06:19,473 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260312_001.tm 2026-03-13 13:06:19,474 Create SOCManager @ /data/stix/SOLSOC/from_edds/tm/processing 2026-03-13 13:06:19,482 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-03-13 13:06:19,536 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-13 13:06:19,536 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-03-13 13:06:19,539 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-13 13:06:19,539 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M23_V01.json 2026-03-13 13:06:19,548 newer version (257) found for LTP23_Apr2026-Jun2026: replacing 2026-03-13 13:06:19,548 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-03-13 13:06:19,553 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-03-13 13:06:19,553 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-03-13 13:06:19,554 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-03-13 13:06:19,555 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-03-13 13:06:19,564 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-03-13 13:06:19,564 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-03-13 13:06:19,569 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-03-13 13:06:19,569 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-03-13 13:06:19,571 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-03-13 13:06:19,571 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-03-13 13:06:19,576 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-03-13 13:06:19,576 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-03-13 13:06:19,580 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-03-13 13:06:19,580 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-03-13 13:06:19,581 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-03-13 13:06:19,581 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-03-13 13:06:19,584 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-03-13 13:06:19,585 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-03-13 13:06:19,586 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-03-13 13:06:19,586 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-03-13 13:06:19,588 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-03-13 13:06:19,588 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-03-13 13:06:19,590 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-03-13 13:06:19,590 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-03-13 13:06:19,592 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-03-13 13:06:19,592 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-03-13 13:06:19,593 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-03-13 13:06:19,593 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-03-13 13:06:19,594 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-03-13 13:06:19,594 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-03-13 13:06:19,595 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-03-13 13:06:19,595 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-03-13 13:06:19,596 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-03-13 13:06:19,596 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-03-13 13:06:19,598 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-03-13 13:06:19,598 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-03-13 13:06:19,599 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-03-13 13:06:19,600 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-03-13 13:06:19,600 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-03-13 13:06:19,600 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-03-13 13:06:19,602 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-03-13 13:06:19,602 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-03-13 13:06:19,602 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-03-13 13:06:19,602 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-03-13 13:06:19,603 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-03-13 13:06:19,603 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-03-13 13:06:19,604 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-03-13 13:06:19,604 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-03-13 13:06:19,605 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-03-13 13:06:19,605 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-03-13 13:06:19,606 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-03-13 13:06:19,606 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-03-13 13:06:19,607 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-03-13 13:06:19,607 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-03-13 13:06:19,607 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-03-13 13:06:19,607 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-03-13 13:06:19,610 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-03-13 13:06:19,610 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-03-13 13:06:19,612 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-13 13:06:19,612 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-03-13 13:06:19,613 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-03-13 13:06:19,613 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-03-13 13:06:19,615 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-03-13 13:06:19,615 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-03-13 13:06:19,617 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-03-13 13:06:19,617 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-03-13 13:06:19,618 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-03-13 13:06:19,619 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-03-13 13:06:19,619 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-03-13 13:06:19,619 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-03-13 13:06:19,620 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-03-13 13:06:19,620 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-03-13 13:06:19,620 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-03-13 13:06:19,620 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-03-13 13:06:19,621 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-03-13 13:06:19,621 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-03-13 13:06:19,621 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-13 13:06:19,621 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-03-13 13:06:19,621 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-13 13:06:19,621 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-03-13 13:06:19,622 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-13 13:06:19,622 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-03-13 13:06:19,623 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-13 13:06:19,623 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-03-13 13:06:19,623 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-03-13 13:06:19,918 SOOP Rebuild Index: soops: 562observations 1247 2026-03-13 13:06:35,946 PIPELINE VERSION Version: 1.7.3 Common instrument config version: v0.1.10 PROCESSING VERSIONS Prod: Ephemeris File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/ANC/aspect.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/CAL/energy.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-03-13 13:06:35,946 CONFIG [Paths] tm_archive = /data/stix/SOLSOC/from_edds/tm/processing fits_archive = /data/stix/out/fits_v1.2.0 spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12388 parallel_batchsize_l0 = 100 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = INFO log_dir = /data/stix/out/fits_v1.2.0/logging error_mail_send = True error_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch sync_tm_at_start = True stop_after_unprocessed = True start_with_unprocessed = True last_processed = TM_LTP21_BatchRequest.PktTmRaw.SOL.0.2025.237.08.00.24.563.NHzM@2025.365.16.00.00.336.1.xml.out history_db_file = /home/stixcore/soar_pub/processing_history.sqlite [Publish] db_file = /home/stixcore/soar_pub/published.sqlite include_levels = L0, L1, ANC, LL03 waiting_period = 42d target_dir = /home/stixcore/from_pub099 report_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie report_mail_send = True same_esa_name_dir = /data/stix/out/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/fits_v1.2.0 ll_waiting_period = 0d target_host = pub026.cs.technik.fhnw.ch supplement_report = /home/stixcore/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal,asp log_dir = /data/stix/out/fits_v1.2.0/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-03-13 13:06:35,947 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 36327 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260309_002.tm'), 'pred', datetime.datetime(2026, 3, 9, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260312_001.tm'), 'flown', datetime.datetime(2026, 3, 12, 0, 0))] IDBManager: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb Versions: [{'label': '2.26.36', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-03-13 13:06:37,078 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260309_002.tm 2026-03-13 13:06:37,335 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260312_001.tm 2026-03-13 13:06:37,336 Loaded 1 ECC configurations from index 2026-03-13 13:06:37,507 Successfully read ELUT file: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/config/data/common/elut/elut_table_20210625.csv 2026-03-13 13:06:37,542 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8piyv15r 2026-03-13 13:06:37,543 Read config from in: /tmp/ecc_context_ecc_cfg_1_8piyv15r/post_ecc.ini 2026-03-13 13:06:38,789 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8piyv15r/solo_L1_stix-cal-energy_20211030_V03_ecc_in.fits 2026-03-13 13:15:39,812 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211030_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211030_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 13:15:45,819 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 13:15:45,828 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8piyv15r 2026-03-13 13:15:45,869 Soop found: SOOP 2026-03-13 13:15:45,979 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/30/CAL/solo_CAL_stix-cal-energy_20211030T005025-20211030T031426_V02.fits 2026-03-13 13:15:46,144 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_noucvgwn 2026-03-13 13:15:46,144 Read config from in: /tmp/ecc_context_ecc_cfg_1_noucvgwn/post_ecc.ini 2026-03-13 13:15:47,388 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_noucvgwn/solo_L1_stix-cal-energy_20211010_V03_ecc_in.fits 2026-03-13 13:24:52,865 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211010_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211010_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 13:25:01,233 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 13:25:01,241 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_noucvgwn 2026-03-13 13:25:01,269 Soop found: SOOP 2026-03-13 13:25:01,376 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/10/CAL/solo_CAL_stix-cal-energy_20211010T001628-20211010T024028_V02.fits 2026-03-13 13:25:01,556 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vyihkf59 2026-03-13 13:25:01,556 Read config from in: /tmp/ecc_context_ecc_cfg_1_vyihkf59/post_ecc.ini 2026-03-13 13:25:02,837 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vyihkf59/solo_L1_stix-cal-energy_20211001_V03_ecc_in.fits 2026-03-13 13:34:11,155 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211001_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211001_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211001_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211001_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 13:34:17,180 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 13:34:17,188 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vyihkf59 2026-03-13 13:34:17,227 Soop found: SOOP 2026-03-13 13:34:17,325 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/01/CAL/solo_CAL_stix-cal-energy_20211001T000821-20211001T023220_V02.fits 2026-03-13 13:34:17,493 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eysla9y8 2026-03-13 13:34:17,493 Read config from in: /tmp/ecc_context_ecc_cfg_1_eysla9y8/post_ecc.ini 2026-03-13 13:34:18,734 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eysla9y8/solo_L1_stix-cal-energy_20211024_V03_ecc_in.fits 2026-03-13 13:43:29,016 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211024_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211024_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 13:43:35,027 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 13:43:35,033 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eysla9y8 2026-03-13 13:43:35,060 Soop found: SOOP 2026-03-13 13:43:35,155 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/24/CAL/solo_CAL_stix-cal-energy_20211024T003628-20211024T030027_V02.fits 2026-03-13 13:43:35,319 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nc1cdrqt 2026-03-13 13:43:35,319 Read config from in: /tmp/ecc_context_ecc_cfg_1_nc1cdrqt/post_ecc.ini 2026-03-13 13:43:36,557 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nc1cdrqt/solo_L1_stix-cal-energy_20211008_V03_ecc_in.fits 2026-03-13 13:52:52,951 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211008_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211008_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 13:52:59,392 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 13:52:59,399 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nc1cdrqt 2026-03-13 13:52:59,427 Soop found: SOOP 2026-03-13 13:52:59,526 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/08/CAL/solo_CAL_stix-cal-energy_20211008T001620-20211008T024019_V02.fits 2026-03-13 13:52:59,694 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_57aixoe1 2026-03-13 13:52:59,694 Read config from in: /tmp/ecc_context_ecc_cfg_1_57aixoe1/post_ecc.ini 2026-03-13 13:53:00,953 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_57aixoe1/solo_L1_stix-cal-energy_20211005_V03_ecc_in.fits 2026-03-13 14:02:00,687 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211005_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211005_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 14:02:06,683 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 14:02:06,690 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_57aixoe1 2026-03-13 14:02:06,718 Soop found: SOOP 2026-03-13 14:02:06,813 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/05/CAL/solo_CAL_stix-cal-energy_20211005T001605-20211005T024004_V02.fits 2026-03-13 14:02:06,973 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xpglf81i 2026-03-13 14:02:06,974 Read config from in: /tmp/ecc_context_ecc_cfg_1_xpglf81i/post_ecc.ini 2026-03-13 14:02:08,297 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xpglf81i/solo_L1_stix-cal-energy_20211014_V03_ecc_in.fits 2026-03-13 14:11:26,908 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211014_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211014_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 14:11:32,937 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 14:11:32,944 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xpglf81i 2026-03-13 14:11:32,972 Soop found: SOOP 2026-03-13 14:11:33,067 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/14/CAL/solo_CAL_stix-cal-energy_20211014T002615-20211014T025015_V02.fits 2026-03-13 14:11:33,229 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l7sf2mqf 2026-03-13 14:11:33,230 Read config from in: /tmp/ecc_context_ecc_cfg_1_l7sf2mqf/post_ecc.ini 2026-03-13 14:11:34,482 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l7sf2mqf/solo_L1_stix-cal-energy_20211007_V03_ecc_in.fits 2026-03-13 14:20:37,775 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211007_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211007_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 14:20:45,957 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 14:20:45,965 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l7sf2mqf 2026-03-13 14:20:45,992 Soop found: SOOP 2026-03-13 14:20:46,092 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/07/CAL/solo_CAL_stix-cal-energy_20211007T001615-20211007T024015_V02.fits 2026-03-13 14:20:46,265 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_prmt1rep 2026-03-13 14:20:46,265 Read config from in: /tmp/ecc_context_ecc_cfg_1_prmt1rep/post_ecc.ini 2026-03-13 14:20:47,523 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_prmt1rep/solo_L1_stix-cal-energy_20211020_V03_ecc_in.fits 2026-03-13 14:29:51,956 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211020_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211020_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 14:29:57,937 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 14:29:57,944 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_prmt1rep 2026-03-13 14:29:57,969 Soop found: SOOP 2026-03-13 14:29:58,065 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/20/CAL/solo_CAL_stix-cal-energy_20211020T003609-20211020T030009_V02.fits 2026-03-13 14:29:58,229 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bt187rn1 2026-03-13 14:29:58,230 Read config from in: /tmp/ecc_context_ecc_cfg_1_bt187rn1/post_ecc.ini 2026-03-13 14:29:59,471 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bt187rn1/solo_L1_stix-cal-energy_20211006_V03_ecc_in.fits 2026-03-13 14:39:02,887 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211006_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211006_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 14:39:08,837 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 14:39:08,844 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bt187rn1 2026-03-13 14:39:08,870 Soop found: SOOP 2026-03-13 14:39:08,963 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/06/CAL/solo_CAL_stix-cal-energy_20211006T001610-20211006T024009_V02.fits 2026-03-13 14:39:09,122 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_al_cgjlg 2026-03-13 14:39:09,122 Read config from in: /tmp/ecc_context_ecc_cfg_1_al_cgjlg/post_ecc.ini 2026-03-13 14:39:10,354 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_al_cgjlg/solo_L1_stix-cal-energy_20211003_V03_ecc_in.fits 2026-03-13 14:48:12,699 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211003_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211003_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 14:48:18,645 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 14:48:18,652 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_al_cgjlg 2026-03-13 14:48:18,680 Soop found: SOOP 2026-03-13 14:48:18,775 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/03/CAL/solo_CAL_stix-cal-energy_20211003T000830-20211003T023230_V02.fits 2026-03-13 14:48:18,936 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uyk1yrkl 2026-03-13 14:48:18,936 Read config from in: /tmp/ecc_context_ecc_cfg_1_uyk1yrkl/post_ecc.ini 2026-03-13 14:48:20,176 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uyk1yrkl/solo_L1_stix-cal-energy_20211017_V03_ecc_in.fits 2026-03-13 14:57:24,911 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211017_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211017_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 14:57:30,933 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 14:57:30,940 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uyk1yrkl 2026-03-13 14:57:30,967 Soop found: SOOP 2026-03-13 14:57:31,062 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/17/CAL/solo_CAL_stix-cal-energy_20211017T002628-20211017T025028_V02.fits 2026-03-13 14:57:31,229 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_voae95ds 2026-03-13 14:57:31,230 Read config from in: /tmp/ecc_context_ecc_cfg_1_voae95ds/post_ecc.ini 2026-03-13 14:57:32,493 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_voae95ds/solo_L1_stix-cal-energy_20211018_V03_ecc_in.fits 2026-03-13 15:06:32,709 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211018_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211018_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 15:06:38,710 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 15:06:38,717 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_voae95ds 2026-03-13 15:06:38,744 Soop found: SOOP 2026-03-13 15:06:38,838 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/18/CAL/solo_CAL_stix-cal-energy_20211018T003600-20211018T025959_V02.fits 2026-03-13 15:06:38,998 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nk93n8j7 2026-03-13 15:06:38,999 Read config from in: /tmp/ecc_context_ecc_cfg_1_nk93n8j7/post_ecc.ini 2026-03-13 15:06:40,242 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nk93n8j7/solo_L1_stix-cal-energy_20211023_V03_ecc_in.fits 2026-03-13 15:15:40,218 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211023_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211023_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 15:15:47,809 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 15:15:47,816 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nk93n8j7 2026-03-13 15:15:47,841 Soop found: SOOP 2026-03-13 15:15:47,934 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/23/CAL/solo_CAL_stix-cal-energy_20211023T003624-20211023T030023_V02.fits 2026-03-13 15:15:48,099 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a3l8vvit 2026-03-13 15:15:48,100 Read config from in: /tmp/ecc_context_ecc_cfg_1_a3l8vvit/post_ecc.ini 2026-03-13 15:15:49,325 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a3l8vvit/solo_L1_stix-cal-energy_20211016_V03_ecc_in.fits 2026-03-13 15:24:57,200 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211016_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211016_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 15:25:03,184 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 15:25:03,191 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a3l8vvit 2026-03-13 15:25:03,217 Soop found: SOOP 2026-03-13 15:25:03,310 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/16/CAL/solo_CAL_stix-cal-energy_20211016T002624-20211016T025024_V02.fits 2026-03-13 15:25:03,469 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_om0sjoqo 2026-03-13 15:25:03,470 Read config from in: /tmp/ecc_context_ecc_cfg_1_om0sjoqo/post_ecc.ini 2026-03-13 15:25:04,708 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_om0sjoqo/solo_L1_stix-cal-energy_20211021_V03_ecc_in.fits 2026-03-13 15:34:03,469 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211021_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211021_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 15:34:09,499 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 15:34:09,507 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_om0sjoqo 2026-03-13 15:34:09,536 Soop found: SOOP 2026-03-13 15:34:09,633 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/21/CAL/solo_CAL_stix-cal-energy_20211021T003615-20211021T030014_V02.fits 2026-03-13 15:34:09,800 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_02iirnr8 2026-03-13 15:34:09,800 Read config from in: /tmp/ecc_context_ecc_cfg_1_02iirnr8/post_ecc.ini 2026-03-13 15:34:11,127 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_02iirnr8/solo_L1_stix-cal-energy_20211012_V03_ecc_in.fits 2026-03-13 15:43:21,953 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211012_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211012_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 15:43:28,068 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 15:43:28,075 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_02iirnr8 2026-03-13 15:43:28,101 Soop found: SOOP 2026-03-13 15:43:28,195 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/12/CAL/solo_CAL_stix-cal-energy_20211012T002605-20211012T025004_V02.fits 2026-03-13 15:43:28,357 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pyecxrim 2026-03-13 15:43:28,358 Read config from in: /tmp/ecc_context_ecc_cfg_1_pyecxrim/post_ecc.ini 2026-03-13 15:43:29,598 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pyecxrim/solo_L1_stix-cal-energy_20211027_V03_ecc_in.fits 2026-03-13 15:52:39,247 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211027_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211027_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 15:52:45,196 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 15:52:45,207 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pyecxrim 2026-03-13 15:52:45,234 Soop found: SOOP 2026-03-13 15:52:45,331 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/27/CAL/solo_CAL_stix-cal-energy_20211027T005011-20211027T031410_V02.fits 2026-03-13 15:52:45,492 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_44ss2dzd 2026-03-13 15:52:45,492 Read config from in: /tmp/ecc_context_ecc_cfg_1_44ss2dzd/post_ecc.ini 2026-03-13 15:52:46,765 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_44ss2dzd/solo_L1_stix-cal-energy_20211011_V03_ecc_in.fits 2026-03-13 16:01:34,919 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211011_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211011_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 16:01:41,082 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 16:01:41,089 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_44ss2dzd 2026-03-13 16:01:41,115 Soop found: SOOP 2026-03-13 16:01:41,209 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/11/CAL/solo_CAL_stix-cal-energy_20211011T002600-20211011T025000_V02.fits 2026-03-13 16:01:41,367 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i9xl1xlf 2026-03-13 16:01:41,367 Read config from in: /tmp/ecc_context_ecc_cfg_1_i9xl1xlf/post_ecc.ini 2026-03-13 16:01:44,034 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i9xl1xlf/solo_L1_stix-cal-energy_20211026_V03_ecc_in.fits 2026-03-13 16:10:42,818 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211026_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211026_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 16:10:48,807 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 16:10:48,814 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i9xl1xlf 2026-03-13 16:10:48,840 Soop found: SOOP 2026-03-13 16:10:48,934 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/26/CAL/solo_CAL_stix-cal-energy_20211026T005005-20211026T031405_V02.fits 2026-03-13 16:10:49,094 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ans7etc5 2026-03-13 16:10:49,095 Read config from in: /tmp/ecc_context_ecc_cfg_1_ans7etc5/post_ecc.ini 2026-03-13 16:10:50,325 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ans7etc5/solo_L1_stix-cal-energy_20211019_V03_ecc_in.fits 2026-03-13 16:19:54,919 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211019_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211019_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 16:20:00,935 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 16:20:00,942 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ans7etc5 2026-03-13 16:20:00,968 Soop found: SOOP 2026-03-13 16:20:01,061 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/19/CAL/solo_CAL_stix-cal-energy_20211019T003605-20211019T030004_V02.fits 2026-03-13 16:20:01,224 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_19js2c3_ 2026-03-13 16:20:01,225 Read config from in: /tmp/ecc_context_ecc_cfg_1_19js2c3_/post_ecc.ini 2026-03-13 16:20:02,466 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_19js2c3_/solo_L1_stix-cal-energy_20211022_V03_ecc_in.fits 2026-03-13 16:29:02,450 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211022_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211022_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 16:29:08,447 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 16:29:08,455 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_19js2c3_ 2026-03-13 16:29:08,481 Soop found: SOOP 2026-03-13 16:29:08,575 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/22/CAL/solo_CAL_stix-cal-energy_20211022T003619-20211022T030018_V02.fits 2026-03-13 16:29:08,737 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0aaewxu2 2026-03-13 16:29:08,738 Read config from in: /tmp/ecc_context_ecc_cfg_1_0aaewxu2/post_ecc.ini 2026-03-13 16:29:09,979 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0aaewxu2/solo_L1_stix-cal-energy_20211025_V03_ecc_in.fits 2026-03-13 16:37:58,242 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211025_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211025_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 16:38:04,311 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 16:38:04,319 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0aaewxu2 2026-03-13 16:38:04,347 Soop found: SOOP 2026-03-13 16:38:04,441 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/25/CAL/solo_CAL_stix-cal-energy_20211025T005000-20211025T031400_V02.fits 2026-03-13 16:38:04,605 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__cjk2lot 2026-03-13 16:38:04,606 Read config from in: /tmp/ecc_context_ecc_cfg_1__cjk2lot/post_ecc.ini 2026-03-13 16:38:05,847 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__cjk2lot/solo_L1_stix-cal-energy_20211028_V03_ecc_in.fits 2026-03-13 16:47:16,788 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211028_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211028_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 16:47:22,836 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 16:47:22,843 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__cjk2lot 2026-03-13 16:47:22,869 Soop found: SOOP 2026-03-13 16:47:22,963 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/28/CAL/solo_CAL_stix-cal-energy_20211028T005015-20211028T031415_V02.fits 2026-03-13 16:47:23,125 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0ld_y5ol 2026-03-13 16:47:23,126 Read config from in: /tmp/ecc_context_ecc_cfg_1_0ld_y5ol/post_ecc.ini 2026-03-13 16:47:24,363 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0ld_y5ol/solo_L1_stix-cal-energy_20211009_V03_ecc_in.fits 2026-03-13 16:56:25,869 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211009_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211009_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211009_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211009_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 16:56:31,844 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 16:56:31,851 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0ld_y5ol 2026-03-13 16:56:31,879 Soop found: SOOP 2026-03-13 16:56:31,973 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/09/CAL/solo_CAL_stix-cal-energy_20211009T001624-20211009T024023_V02.fits 2026-03-13 16:56:32,135 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_61qunfvn 2026-03-13 16:56:32,135 Read config from in: /tmp/ecc_context_ecc_cfg_1_61qunfvn/post_ecc.ini 2026-03-13 16:56:34,823 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_61qunfvn/solo_L1_stix-cal-energy_20211029_V03_ecc_in.fits 2026-03-13 17:05:25,028 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211029_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211029_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211029_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211029_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 108 is dead pixel 119 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 17:05:31,065 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 17:05:31,075 ECC result Gain_Cor 0.0 for DET 10 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-13 17:05:31,075 ECC result Gain_Cor 0.0 for DET 10 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-13 17:05:31,081 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_61qunfvn 2026-03-13 17:05:31,113 Soop found: SOOP 2026-03-13 17:05:31,211 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/29/CAL/solo_CAL_stix-cal-energy_20211029T005020-20211029T031420_V02.fits 2026-03-13 17:05:31,385 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8ewnjiov 2026-03-13 17:05:31,385 Read config from in: /tmp/ecc_context_ecc_cfg_1_8ewnjiov/post_ecc.ini 2026-03-13 17:05:32,616 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8ewnjiov/solo_L1_stix-cal-energy_20211002_V03_ecc_in.fits 2026-03-13 17:14:38,710 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211002_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211002_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211002_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211002_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 17:14:45,133 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 17:14:45,140 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8ewnjiov 2026-03-13 17:14:45,167 Soop found: SOOP 2026-03-13 17:14:45,262 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/02/CAL/solo_CAL_stix-cal-energy_20211002T000826-20211002T023225_V02.fits 2026-03-13 17:14:45,423 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4vq898bu 2026-03-13 17:14:45,424 Read config from in: /tmp/ecc_context_ecc_cfg_1_4vq898bu/post_ecc.ini 2026-03-13 17:14:46,671 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4vq898bu/solo_L1_stix-cal-energy_20211013_V03_ecc_in.fits 2026-03-13 17:23:51,546 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211013_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211013_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211013_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211013_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 17:23:57,530 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 17:23:57,537 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4vq898bu 2026-03-13 17:23:57,564 Soop found: SOOP 2026-03-13 17:23:57,659 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/13/CAL/solo_CAL_stix-cal-energy_20211013T002609-20211013T025009_V02.fits 2026-03-13 17:23:57,821 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iae8vs2w 2026-03-13 17:23:57,822 Read config from in: /tmp/ecc_context_ecc_cfg_1_iae8vs2w/post_ecc.ini 2026-03-13 17:23:59,061 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iae8vs2w/solo_L1_stix-cal-energy_20211015_V03_ecc_in.fits 2026-03-13 17:33:01,938 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211015_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211015_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211015_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211015_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 17:33:08,575 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 17:33:08,582 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_iae8vs2w 2026-03-13 17:33:08,612 Soop found: SOOP 2026-03-13 17:33:08,712 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/15/CAL/solo_CAL_stix-cal-energy_20211015T002620-20211015T025019_V02.fits 2026-03-13 17:33:08,883 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kqlm2r0x 2026-03-13 17:33:08,884 Read config from in: /tmp/ecc_context_ecc_cfg_1_kqlm2r0x/post_ecc.ini 2026-03-13 17:33:10,154 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kqlm2r0x/solo_L1_stix-cal-energy_20211004_V03_ecc_in.fits 2026-03-13 17:42:06,460 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211004_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211004_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211004_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211004_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 17:42:12,443 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 17:42:12,450 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kqlm2r0x 2026-03-13 17:42:12,478 Soop found: SOOP 2026-03-13 17:42:12,478 Soop found: SOOP 2026-03-13 17:42:12,574 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/10/04/CAL/solo_CAL_stix-cal-energy_20211004T001600-20211004T024000_V02.fits 2026-03-13 17:42:12,716 Successfully read ELUT file: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/config/data/common/elut/elut_table_20201204.csv 2026-03-13 17:42:12,748 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wfoof69k 2026-03-13 17:42:12,749 Read config from in: /tmp/ecc_context_ecc_cfg_1_wfoof69k/post_ecc.ini 2026-03-13 17:42:13,992 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wfoof69k/solo_L1_stix-cal-energy_20210130_V03_ecc_in.fits 2026-03-13 17:51:06,792 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210130_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210130_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 17:51:14,288 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 17:51:14,294 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wfoof69k 2026-03-13 17:51:14,321 No soops found for time: 2021-01-30 21:52:12.788736 - 2021-01-31 00:16:12.803218 2026-03-13 17:51:14,413 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/30/CAL/solo_CAL_stix-cal-energy_20210130T215212-20210131T001612_V02.fits 2026-03-13 17:51:14,569 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_coibys_p 2026-03-13 17:51:14,569 Read config from in: /tmp/ecc_context_ecc_cfg_1_coibys_p/post_ecc.ini 2026-03-13 17:51:15,799 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_coibys_p/solo_L1_stix-cal-energy_20210110_V03_ecc_in.fits 2026-03-13 18:00:18,117 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210110_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210110_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 18:00:24,142 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 18:00:24,149 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_coibys_p 2026-03-13 18:00:24,173 No soops found for time: 2021-01-10 16:59:44.860604 - 2021-01-10 19:23:43.875078 2026-03-13 18:00:24,181 No observations found for time: 2021-01-10 16:59:44.860604 - 2021-01-10 19:23:43.875078 : SoopObservationType.ALL 2026-03-13 18:00:24,266 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/10/CAL/solo_CAL_stix-cal-energy_20210110T165944-20210110T192343_V02.fits 2026-03-13 18:00:24,423 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p875elnh 2026-03-13 18:00:24,423 Read config from in: /tmp/ecc_context_ecc_cfg_1_p875elnh/post_ecc.ini 2026-03-13 18:00:25,664 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p875elnh/solo_L1_stix-cal-energy_20210101_V03_ecc_in.fits 2026-03-13 18:09:10,404 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 18:09:16,324 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 18:09:16,331 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p875elnh 2026-03-13 18:09:16,356 No soops found for time: 2021-01-01 03:13:40.476293 - 2021-01-01 04:43:40.485298 2026-03-13 18:09:16,364 No observations found for time: 2021-01-01 03:13:40.476293 - 2021-01-01 04:43:40.485298 : SoopObservationType.ALL 2026-03-13 18:09:16,449 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/01/CAL/solo_CAL_stix-cal-energy_20210101T031340-20210101T044340_V02.fits 2026-03-13 18:09:16,607 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u5y218r3 2026-03-13 18:09:16,608 Read config from in: /tmp/ecc_context_ecc_cfg_1_u5y218r3/post_ecc.ini 2026-03-13 18:09:17,837 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u5y218r3/solo_L1_stix-cal-energy_20210124_V03_ecc_in.fits 2026-03-13 18:18:07,588 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 18:18:13,497 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 18:18:13,503 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u5y218r3 2026-03-13 18:18:13,529 No soops found for time: 2021-01-24 21:51:44.919769 - 2021-01-25 00:15:43.934250 2026-03-13 18:18:13,623 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/24/CAL/solo_CAL_stix-cal-energy_20210124T215144-20210125T001543_V02.fits 2026-03-13 18:18:13,782 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c0qpy20d 2026-03-13 18:18:13,782 Read config from in: /tmp/ecc_context_ecc_cfg_1_c0qpy20d/post_ecc.ini 2026-03-13 18:18:15,024 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c0qpy20d/solo_L1_stix-cal-energy_20210108_V03_ecc_in.fits 2026-03-13 18:27:08,657 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210108_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210108_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 18:27:14,570 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 18:27:14,577 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c0qpy20d 2026-03-13 18:27:14,604 No soops found for time: 2021-01-08 16:59:35.571081 - 2021-01-08 19:23:34.585555 2026-03-13 18:27:14,612 No observations found for time: 2021-01-08 16:59:35.571081 - 2021-01-08 19:23:34.585555 : SoopObservationType.ALL 2026-03-13 18:27:14,697 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/08/CAL/solo_CAL_stix-cal-energy_20210108T165935-20210108T192334_V02.fits 2026-03-13 18:27:14,852 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6lq4pkzs 2026-03-13 18:27:14,853 Read config from in: /tmp/ecc_context_ecc_cfg_1_6lq4pkzs/post_ecc.ini 2026-03-13 18:27:16,096 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6lq4pkzs/solo_L1_stix-cal-energy_20210105_V03_ecc_in.fits 2026-03-13 18:36:04,549 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210105_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210105_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 18:36:10,455 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 18:36:10,462 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6lq4pkzs 2026-03-13 18:36:10,489 No soops found for time: 2021-01-05 16:59:21.135235 - 2021-01-05 19:23:21.149644 2026-03-13 18:36:10,497 No observations found for time: 2021-01-05 16:59:21.135235 - 2021-01-05 19:23:21.149644 : SoopObservationType.ALL 2026-03-13 18:36:10,581 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/05/CAL/solo_CAL_stix-cal-energy_20210105T165921-20210105T192321_V02.fits 2026-03-13 18:36:10,747 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_40y25z0z 2026-03-13 18:36:10,748 Read config from in: /tmp/ecc_context_ecc_cfg_1_40y25z0z/post_ecc.ini 2026-03-13 18:36:11,989 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_40y25z0z/solo_L1_stix-cal-energy_20210114_V03_ecc_in.fits 2026-03-13 18:45:15,988 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 18:45:23,524 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 18:45:23,531 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_40y25z0z 2026-03-13 18:45:23,556 No soops found for time: 2021-01-14 17:00:03.439651 - 2021-01-14 19:24:03.454126 2026-03-13 18:45:23,564 No observations found for time: 2021-01-14 17:00:03.439651 - 2021-01-14 19:24:03.454126 : SoopObservationType.ALL 2026-03-13 18:45:23,651 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/14/CAL/solo_CAL_stix-cal-energy_20210114T170003-20210114T192403_V02.fits 2026-03-13 18:45:23,810 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_asorfsop 2026-03-13 18:45:23,810 Read config from in: /tmp/ecc_context_ecc_cfg_1_asorfsop/post_ecc.ini 2026-03-13 18:45:25,044 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_asorfsop/solo_L1_stix-cal-energy_20210107_V03_ecc_in.fits 2026-03-13 18:54:10,985 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210107_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210107_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 18:54:16,890 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 18:54:16,897 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_asorfsop 2026-03-13 18:54:16,921 No soops found for time: 2021-01-07 16:59:30.426319 - 2021-01-07 19:23:30.440794 2026-03-13 18:54:16,930 No observations found for time: 2021-01-07 16:59:30.426319 - 2021-01-07 19:23:30.440794 : SoopObservationType.ALL 2026-03-13 18:54:17,014 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/07/CAL/solo_CAL_stix-cal-energy_20210107T165930-20210107T192330_V02.fits 2026-03-13 18:54:17,179 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s0vk0ugs 2026-03-13 18:54:17,179 Read config from in: /tmp/ecc_context_ecc_cfg_1_s0vk0ugs/post_ecc.ini 2026-03-13 18:54:18,405 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s0vk0ugs/solo_L1_stix-cal-energy_20210106_V03_ecc_in.fits 2026-03-13 19:03:02,880 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210106_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210106_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 19:03:08,784 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 19:03:08,791 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s0vk0ugs 2026-03-13 19:03:08,814 No soops found for time: 2021-01-06 16:59:26.281558 - 2021-01-06 19:23:25.296032 2026-03-13 19:03:08,822 No observations found for time: 2021-01-06 16:59:26.281558 - 2021-01-06 19:23:25.296032 : SoopObservationType.ALL 2026-03-13 19:03:08,905 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/06/CAL/solo_CAL_stix-cal-energy_20210106T165926-20210106T192325_V02.fits 2026-03-13 19:03:09,062 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bnl2nd_p 2026-03-13 19:03:09,063 Read config from in: /tmp/ecc_context_ecc_cfg_1_bnl2nd_p/post_ecc.ini 2026-03-13 19:03:10,300 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bnl2nd_p/solo_L1_stix-cal-energy_20210117_V03_ecc_in.fits 2026-03-13 19:11:45,781 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210117_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210117_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 19:11:51,912 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 19:11:51,919 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bnl2nd_p 2026-03-13 19:11:51,944 No soops found for time: 2021-01-17 17:00:16.884577 - 2021-01-17 17:17:14.886303 2026-03-13 19:11:52,038 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/17/CAL/solo_CAL_stix-cal-energy_20210117T170016-20210117T171714_V02.fits 2026-03-13 19:11:52,197 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jb3z4e6y 2026-03-13 19:11:52,197 Read config from in: /tmp/ecc_context_ecc_cfg_1_jb3z4e6y/post_ecc.ini 2026-03-13 19:11:53,446 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jb3z4e6y/solo_L1_stix-cal-energy_20210116_V03_ecc_in.fits 2026-03-13 19:20:45,680 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210116_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210116_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 19:20:51,591 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 19:20:51,600 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jb3z4e6y 2026-03-13 19:20:51,625 No soops found for time: 2021-01-16 17:00:12.738073 - 2021-01-16 19:24:11.752721 2026-03-13 19:20:51,719 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/16/CAL/solo_CAL_stix-cal-energy_20210116T170012-20210116T192411_V02.fits 2026-03-13 19:20:51,877 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yrwdh2rf 2026-03-13 19:20:51,878 Read config from in: /tmp/ecc_context_ecc_cfg_1_yrwdh2rf/post_ecc.ini 2026-03-13 19:20:53,115 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yrwdh2rf/solo_L1_stix-cal-energy_20210112_V03_ecc_in.fits 2026-03-13 19:29:50,618 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210112_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210112_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 19:29:56,701 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 19:29:56,708 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yrwdh2rf 2026-03-13 19:29:56,734 No soops found for time: 2021-01-12 16:59:54.150128 - 2021-01-12 19:23:53.164601 2026-03-13 19:29:56,742 No observations found for time: 2021-01-12 16:59:54.150128 - 2021-01-12 19:23:53.164601 : SoopObservationType.ALL 2026-03-13 19:29:56,827 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/12/CAL/solo_CAL_stix-cal-energy_20210112T165954-20210112T192353_V02.fits 2026-03-13 19:29:56,988 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eegixcij 2026-03-13 19:29:56,988 Read config from in: /tmp/ecc_context_ecc_cfg_1_eegixcij/post_ecc.ini 2026-03-13 19:29:58,228 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eegixcij/solo_L1_stix-cal-energy_20210127_V03_ecc_in.fits 2026-03-13 19:38:49,282 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210127_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210127_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 19:38:56,727 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 19:38:56,734 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eegixcij 2026-03-13 19:38:56,760 No soops found for time: 2021-01-27 21:51:58.354252 - 2021-01-28 00:15:58.368734 2026-03-13 19:38:56,853 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/27/CAL/solo_CAL_stix-cal-energy_20210127T215158-20210128T001558_V02.fits 2026-03-13 19:38:57,013 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k77439fr 2026-03-13 19:38:57,014 Read config from in: /tmp/ecc_context_ecc_cfg_1_k77439fr/post_ecc.ini 2026-03-13 19:38:58,252 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k77439fr/solo_L1_stix-cal-energy_20210111_V03_ecc_in.fits 2026-03-13 19:48:04,582 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210111_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210111_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 19:48:10,489 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 19:48:10,496 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k77439fr 2026-03-13 19:48:10,521 No soops found for time: 2021-01-11 16:59:49.005365 - 2021-01-11 19:23:49.019841 2026-03-13 19:48:10,529 No observations found for time: 2021-01-11 16:59:49.005365 - 2021-01-11 19:23:49.019841 : SoopObservationType.ALL 2026-03-13 19:48:10,615 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/11/CAL/solo_CAL_stix-cal-energy_20210111T165949-20210111T192349_V02.fits 2026-03-13 19:48:11,005 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iwgi_yd0 2026-03-13 19:48:11,006 Read config from in: /tmp/ecc_context_ecc_cfg_1_iwgi_yd0/post_ecc.ini 2026-03-13 19:48:12,251 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iwgi_yd0/solo_L1_stix-cal-energy_20210126_V03_ecc_in.fits 2026-03-13 19:57:01,080 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210126_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210126_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 19:57:06,994 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 19:57:07,001 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_iwgi_yd0 2026-03-13 19:57:07,025 No soops found for time: 2021-01-26 21:51:54.209425 - 2021-01-27 00:15:53.223905 2026-03-13 19:57:07,118 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/26/CAL/solo_CAL_stix-cal-energy_20210126T215154-20210127T001553_V02.fits 2026-03-13 19:57:07,273 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_066xzmm8 2026-03-13 19:57:07,273 Read config from in: /tmp/ecc_context_ecc_cfg_1_066xzmm8/post_ecc.ini 2026-03-13 19:57:08,508 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_066xzmm8/solo_L1_stix-cal-energy_20210125_V03_ecc_in.fits 2026-03-13 20:05:52,121 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210125_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210125_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 20:05:58,075 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 20:05:58,082 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_066xzmm8 2026-03-13 20:05:58,107 No soops found for time: 2021-01-25 21:51:49.064596 - 2021-01-26 00:15:49.079078 2026-03-13 20:05:58,200 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/25/CAL/solo_CAL_stix-cal-energy_20210125T215149-20210126T001549_V02.fits 2026-03-13 20:05:58,356 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hywp5x9y 2026-03-13 20:05:58,356 Read config from in: /tmp/ecc_context_ecc_cfg_1_hywp5x9y/post_ecc.ini 2026-03-13 20:05:59,589 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hywp5x9y/solo_L1_stix-cal-energy_20210128_V03_ecc_in.fits 2026-03-13 20:14:51,847 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210128_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210128_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 20:14:57,799 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 20:14:57,806 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hywp5x9y 2026-03-13 20:14:57,832 No soops found for time: 2021-01-28 21:52:03.499080 - 2021-01-29 00:16:03.513562 2026-03-13 20:14:57,926 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/28/CAL/solo_CAL_stix-cal-energy_20210128T215203-20210129T001603_V02.fits 2026-03-13 20:14:58,087 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kko67p5u 2026-03-13 20:14:58,088 Read config from in: /tmp/ecc_context_ecc_cfg_1_kko67p5u/post_ecc.ini 2026-03-13 20:14:59,327 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kko67p5u/solo_L1_stix-cal-energy_20210109_V03_ecc_in.fits 2026-03-13 20:23:51,215 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210109_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210109_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 20:23:57,147 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 20:23:57,157 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kko67p5u 2026-03-13 20:23:57,189 No soops found for time: 2021-01-09 16:59:39.715842 - 2021-01-09 19:23:39.730317 2026-03-13 20:23:57,197 No observations found for time: 2021-01-09 16:59:39.715842 - 2021-01-09 19:23:39.730317 : SoopObservationType.ALL 2026-03-13 20:23:57,286 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/09/CAL/solo_CAL_stix-cal-energy_20210109T165939-20210109T192339_V02.fits 2026-03-13 20:23:57,447 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_khfcj9fg 2026-03-13 20:23:57,449 Read config from in: /tmp/ecc_context_ecc_cfg_1_khfcj9fg/post_ecc.ini 2026-03-13 20:24:00,184 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_khfcj9fg/solo_L1_stix-cal-energy_20210129_V03_ecc_in.fits 2026-03-13 20:32:54,713 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210129_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210129_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 20:33:00,696 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 20:33:00,703 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_khfcj9fg 2026-03-13 20:33:00,730 No soops found for time: 2021-01-29 21:52:08.643909 - 2021-01-30 00:16:07.658389 2026-03-13 20:33:00,823 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/29/CAL/solo_CAL_stix-cal-energy_20210129T215208-20210130T001607_V02.fits 2026-03-13 20:33:00,983 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wdjv_b7t 2026-03-13 20:33:00,984 Read config from in: /tmp/ecc_context_ecc_cfg_1_wdjv_b7t/post_ecc.ini 2026-03-13 20:33:02,221 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wdjv_b7t/solo_L1_stix-cal-energy_20210113_V03_ecc_in.fits 2026-03-13 20:41:53,667 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210113_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210113_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 20:41:59,656 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 20:41:59,663 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wdjv_b7t 2026-03-13 20:41:59,688 No soops found for time: 2021-01-13 16:59:58.294888 - 2021-01-13 19:23:58.309364 2026-03-13 20:41:59,696 No observations found for time: 2021-01-13 16:59:58.294888 - 2021-01-13 19:23:58.309364 : SoopObservationType.ALL 2026-03-13 20:41:59,782 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/13/CAL/solo_CAL_stix-cal-energy_20210113T165958-20210113T192358_V02.fits 2026-03-13 20:41:59,941 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zw606s95 2026-03-13 20:41:59,942 Read config from in: /tmp/ecc_context_ecc_cfg_1_zw606s95/post_ecc.ini 2026-03-13 20:42:01,174 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zw606s95/solo_L1_stix-cal-energy_20210115_V03_ecc_in.fits 2026-03-13 20:50:56,168 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210115_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210115_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 20:51:02,103 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 20:51:02,110 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zw606s95 2026-03-13 20:51:02,135 No soops found for time: 2021-01-15 17:00:07.591566 - 2021-01-15 19:24:07.606216 2026-03-13 20:51:02,144 No observations found for time: 2021-01-15 17:00:07.591566 - 2021-01-15 19:24:07.606216 : SoopObservationType.ALL 2026-03-13 20:51:02,228 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/01/15/CAL/solo_CAL_stix-cal-energy_20210115T170007-20210115T192407_V02.fits 2026-03-13 20:51:02,394 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jsfco1_m 2026-03-13 20:51:02,394 Read config from in: /tmp/ecc_context_ecc_cfg_1_jsfco1_m/post_ecc.ini 2026-03-13 20:51:03,635 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jsfco1_m/solo_L1_stix-cal-energy_20210830_V03_ecc_in.fits 2026-03-13 21:00:04,572 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210830_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210830_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210830_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210830_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 21:00:10,534 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 21:00:10,541 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jsfco1_m 2026-03-13 21:00:10,566 Soop found: SOOP 2026-03-13 21:00:10,662 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/30/CAL/solo_CAL_stix-cal-energy_20210830T125600-20210830T152000_V02.fits 2026-03-13 21:00:10,821 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nopenomk 2026-03-13 21:00:10,821 Read config from in: /tmp/ecc_context_ecc_cfg_1_nopenomk/post_ecc.ini 2026-03-13 21:00:12,061 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nopenomk/solo_L1_stix-cal-energy_20210810_V03_ecc_in.fits 2026-03-13 21:09:17,190 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210810_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210810_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210810_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210810_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 21:09:23,252 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 21:09:23,259 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nopenomk 2026-03-13 21:09:23,284 No soops found for time: 2021-08-10 12:30:24.584612 - 2021-08-10 14:54:23.599272 2026-03-13 21:09:23,377 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/10/CAL/solo_CAL_stix-cal-energy_20210810T123024-20210810T145423_V02.fits 2026-03-13 21:09:23,535 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_trtafums 2026-03-13 21:09:23,535 Read config from in: /tmp/ecc_context_ecc_cfg_1_trtafums/post_ecc.ini 2026-03-13 21:09:24,774 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_trtafums/solo_L1_stix-cal-energy_20210824_V03_ecc_in.fits 2026-03-13 21:18:28,814 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210824_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210824_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210824_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210824_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 21:18:34,788 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 21:18:34,796 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_trtafums 2026-03-13 21:18:34,822 No soops found for time: 2021-08-24 12:49:58.637366 - 2021-08-24 15:13:58.652027 2026-03-13 21:18:34,914 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/24/CAL/solo_CAL_stix-cal-energy_20210824T124958-20210824T151358_V02.fits 2026-03-13 21:18:35,075 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wg9r_vcr 2026-03-13 21:18:35,076 Read config from in: /tmp/ecc_context_ecc_cfg_1_wg9r_vcr/post_ecc.ini 2026-03-13 21:18:37,663 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wg9r_vcr/solo_L1_stix-cal-energy_20210808_V03_ecc_in.fits 2026-03-13 21:27:53,602 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210808_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210808_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210808_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210808_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 21:27:59,529 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 21:27:59,536 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wg9r_vcr 2026-03-13 21:27:59,560 No soops found for time: 2021-08-08 00:16:10.216621 - 2021-08-08 02:37:33.231017 2026-03-13 21:27:59,654 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/08/CAL/solo_CAL_stix-cal-energy_20210808T001610-20210808T023733_V02.fits 2026-03-13 21:27:59,813 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uhj8w6bt 2026-03-13 21:27:59,814 Read config from in: /tmp/ecc_context_ecc_cfg_1_uhj8w6bt/post_ecc.ini 2026-03-13 21:28:01,048 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uhj8w6bt/solo_L1_stix-cal-energy_20210814_V03_ecc_in.fits 2026-03-13 21:37:05,867 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210814_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210814_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210814_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210814_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 21:37:11,820 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 21:37:11,827 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uhj8w6bt 2026-03-13 21:37:11,851 No soops found for time: 2021-08-14 12:37:16.171777 - 2021-08-14 15:01:15.186437 2026-03-13 21:37:11,944 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/14/CAL/solo_CAL_stix-cal-energy_20210814T123716-20210814T150115_V02.fits 2026-03-13 21:37:12,109 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7plr4ouu 2026-03-13 21:37:12,109 Read config from in: /tmp/ecc_context_ecc_cfg_1_7plr4ouu/post_ecc.ini 2026-03-13 21:37:13,354 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7plr4ouu/solo_L1_stix-cal-energy_20210807_V03_ecc_in.fits 2026-03-13 21:46:15,932 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210807_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210807_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210807_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210807_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 21:46:21,910 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 21:46:21,917 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7plr4ouu 2026-03-13 21:46:21,942 No soops found for time: 2021-08-07 00:16:06.069998 - 2021-08-07 02:40:05.084658 2026-03-13 21:46:22,037 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/07/CAL/solo_CAL_stix-cal-energy_20210807T001606-20210807T024005_V02.fits 2026-03-13 21:46:22,200 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s7_57s84 2026-03-13 21:46:22,201 Read config from in: /tmp/ecc_context_ecc_cfg_1_s7_57s84/post_ecc.ini 2026-03-13 21:46:23,447 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s7_57s84/solo_L1_stix-cal-energy_20210820_V03_ecc_in.fits 2026-03-13 21:55:28,549 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210820_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210820_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210820_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210820_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 21:55:34,519 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 21:55:34,526 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s7_57s84 2026-03-13 21:55:34,551 No soops found for time: 2021-08-20 12:37:44.049652 - 2021-08-20 15:01:43.064312 2026-03-13 21:55:34,643 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/20/CAL/solo_CAL_stix-cal-energy_20210820T123744-20210820T150143_V02.fits 2026-03-13 21:55:34,797 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_izjjdaev 2026-03-13 21:55:34,797 Read config from in: /tmp/ecc_context_ecc_cfg_1_izjjdaev/post_ecc.ini 2026-03-13 21:55:36,032 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_izjjdaev/solo_L1_stix-cal-energy_20210806_V03_ecc_in.fits 2026-03-13 22:04:37,578 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210806_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210806_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210806_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210806_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 22:04:43,534 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 22:04:43,541 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_izjjdaev 2026-03-13 22:04:43,567 No soops found for time: 2021-08-06 00:16:00.923373 - 2021-08-06 02:39:59.938033 2026-03-13 22:04:43,662 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/06/CAL/solo_CAL_stix-cal-energy_20210806T001600-20210806T023959_V02.fits 2026-03-13 22:04:43,831 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5set6azh 2026-03-13 22:04:43,832 Read config from in: /tmp/ecc_context_ecc_cfg_1_5set6azh/post_ecc.ini 2026-03-13 22:04:45,069 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5set6azh/solo_L1_stix-cal-energy_20210803_V03_ecc_in.fits 2026-03-13 22:13:50,506 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210803_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210803_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210803_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210803_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 22:13:57,983 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 22:13:57,990 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5set6azh 2026-03-13 22:13:58,014 No soops found for time: 2021-08-03 00:20:03.483935 - 2021-08-03 02:44:02.498595 2026-03-13 22:13:58,108 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/03/CAL/solo_CAL_stix-cal-energy_20210803T002003-20210803T024402_V02.fits 2026-03-13 22:13:58,272 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gqxrygpz 2026-03-13 22:13:58,272 Read config from in: /tmp/ecc_context_ecc_cfg_1_gqxrygpz/post_ecc.ini 2026-03-13 22:13:59,508 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gqxrygpz/solo_L1_stix-cal-energy_20210817_V03_ecc_in.fits 2026-03-13 22:23:00,245 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210817_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210817_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210817_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210817_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 22:23:06,216 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 22:23:06,223 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gqxrygpz 2026-03-13 22:23:06,247 No soops found for time: 2021-08-17 12:37:29.609778 - 2021-08-17 15:01:29.624439 2026-03-13 22:23:06,340 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/17/CAL/solo_CAL_stix-cal-energy_20210817T123729-20210817T150129_V02.fits 2026-03-13 22:23:06,501 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g4947yr_ 2026-03-13 22:23:06,501 Read config from in: /tmp/ecc_context_ecc_cfg_1_g4947yr_/post_ecc.ini 2026-03-13 22:23:07,753 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g4947yr_/solo_L1_stix-cal-energy_20210831_V03_ecc_in.fits 2026-03-13 22:32:15,596 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210831_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210831_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210831_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210831_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 22:32:21,596 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 22:32:21,603 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g4947yr_ 2026-03-13 22:32:21,627 Soop found: SOOP 2026-03-13 22:32:21,628 Soop found: SOOP 2026-03-13 22:32:21,721 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/31/CAL/solo_CAL_stix-cal-energy_20210831T125605-20210831T152005_V02.fits 2026-03-13 22:32:21,886 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i_ycct5u 2026-03-13 22:32:21,887 Read config from in: /tmp/ecc_context_ecc_cfg_1_i_ycct5u/post_ecc.ini 2026-03-13 22:32:23,124 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i_ycct5u/solo_L1_stix-cal-energy_20210818_V03_ecc_in.fits 2026-03-13 22:41:26,108 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210818_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210818_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210818_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210818_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 22:41:32,126 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 22:41:32,133 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i_ycct5u 2026-03-13 22:41:32,158 No soops found for time: 2021-08-18 12:37:33.756401 - 2021-08-18 15:01:33.771063 2026-03-13 22:41:32,250 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/18/CAL/solo_CAL_stix-cal-energy_20210818T123733-20210818T150133_V02.fits 2026-03-13 22:41:32,408 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zwe_ix7j 2026-03-13 22:41:32,409 Read config from in: /tmp/ecc_context_ecc_cfg_1_zwe_ix7j/post_ecc.ini 2026-03-13 22:41:33,650 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zwe_ix7j/solo_L1_stix-cal-energy_20210823_V03_ecc_in.fits 2026-03-13 22:50:41,760 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210823_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210823_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210823_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210823_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 22:50:47,751 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 22:50:47,758 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zwe_ix7j 2026-03-13 22:50:47,782 No soops found for time: 2021-08-23 12:46:00.490345 - 2021-08-23 15:10:06.505017 2026-03-13 22:50:47,875 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/23/CAL/solo_CAL_stix-cal-energy_20210823T124600-20210823T151006_V02.fits 2026-03-13 22:50:48,035 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_feqayqbx 2026-03-13 22:50:48,035 Read config from in: /tmp/ecc_context_ecc_cfg_1_feqayqbx/post_ecc.ini 2026-03-13 22:50:49,343 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_feqayqbx/solo_L1_stix-cal-energy_20210816_V03_ecc_in.fits 2026-03-13 23:00:01,661 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210816_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210816_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210816_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210816_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 23:00:07,644 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 23:00:07,651 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_feqayqbx 2026-03-13 23:00:07,678 No soops found for time: 2021-08-16 12:37:25.465026 - 2021-08-16 15:01:24.479686 2026-03-13 23:00:07,772 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/16/CAL/solo_CAL_stix-cal-energy_20210816T123725-20210816T150124_V02.fits 2026-03-13 23:00:08,191 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nlrt190y 2026-03-13 23:00:08,192 Read config from in: /tmp/ecc_context_ecc_cfg_1_nlrt190y/post_ecc.ini 2026-03-13 23:00:09,434 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nlrt190y/solo_L1_stix-cal-energy_20210821_V03_ecc_in.fits 2026-03-13 23:09:12,796 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210821_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210821_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210821_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210821_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 23:09:20,208 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 23:09:20,215 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nlrt190y 2026-03-13 23:09:20,239 No soops found for time: 2021-08-21 12:37:48.196276 - 2021-08-21 15:01:48.210938 2026-03-13 23:09:20,330 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/21/CAL/solo_CAL_stix-cal-energy_20210821T123748-20210821T150148_V02.fits 2026-03-13 23:09:20,497 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_if1ygjws 2026-03-13 23:09:20,498 Read config from in: /tmp/ecc_context_ecc_cfg_1_if1ygjws/post_ecc.ini 2026-03-13 23:09:21,722 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_if1ygjws/solo_L1_stix-cal-energy_20210827_V03_ecc_in.fits 2026-03-13 23:18:35,550 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210827_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210827_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210827_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210827_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 23:18:41,519 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 23:18:41,526 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_if1ygjws 2026-03-13 23:18:41,551 No soops found for time: 2021-08-27 12:50:14.077242 - 2021-08-27 15:14:13.091902 2026-03-13 23:18:41,644 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/27/CAL/solo_CAL_stix-cal-energy_20210827T125014-20210827T151413_V02.fits 2026-03-13 23:18:41,808 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f8tnx2js 2026-03-13 23:18:41,808 Read config from in: /tmp/ecc_context_ecc_cfg_1_f8tnx2js/post_ecc.ini 2026-03-13 23:18:43,043 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f8tnx2js/solo_L1_stix-cal-energy_20210811_V03_ecc_in.fits 2026-03-13 23:27:35,845 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210811_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210811_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210811_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210811_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 23:27:41,792 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 23:27:41,800 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f8tnx2js 2026-03-13 23:27:41,826 No soops found for time: 2021-08-11 12:30:28.731236 - 2021-08-11 14:54:27.745896 2026-03-13 23:27:41,920 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/11/CAL/solo_CAL_stix-cal-energy_20210811T123028-20210811T145427_V02.fits 2026-03-13 23:27:42,083 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r7avo55t 2026-03-13 23:27:42,083 Read config from in: /tmp/ecc_context_ecc_cfg_1_r7avo55t/post_ecc.ini 2026-03-13 23:27:43,327 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r7avo55t/solo_L1_stix-cal-energy_20210826_V03_ecc_in.fits 2026-03-13 23:36:44,698 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210826_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210826_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210826_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210826_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 23:36:50,598 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 23:36:50,605 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r7avo55t 2026-03-13 23:36:50,629 No soops found for time: 2021-08-26 12:50:08.930617 - 2021-08-26 15:14:08.945278 2026-03-13 23:36:50,720 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/26/CAL/solo_CAL_stix-cal-energy_20210826T125008-20210826T151408_V02.fits 2026-03-13 23:36:50,884 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5gzgapxv 2026-03-13 23:36:50,885 Read config from in: /tmp/ecc_context_ecc_cfg_1_5gzgapxv/post_ecc.ini 2026-03-13 23:36:52,114 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5gzgapxv/solo_L1_stix-cal-energy_20210819_V03_ecc_in.fits 2026-03-13 23:46:00,933 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210819_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210819_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210819_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210819_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 23:46:06,911 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 23:46:06,923 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5gzgapxv 2026-03-13 23:46:06,952 No soops found for time: 2021-08-19 12:37:38.903027 - 2021-08-19 15:01:38.917689 2026-03-13 23:46:07,050 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/19/CAL/solo_CAL_stix-cal-energy_20210819T123738-20210819T150138_V02.fits 2026-03-13 23:46:07,209 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ja7hlgad 2026-03-13 23:46:07,210 Read config from in: /tmp/ecc_context_ecc_cfg_1_ja7hlgad/post_ecc.ini 2026-03-13 23:46:08,498 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ja7hlgad/solo_L1_stix-cal-energy_20210822_V03_ecc_in.fits 2026-03-13 23:55:11,266 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210822_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210822_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210822_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210822_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-13 23:55:17,221 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-13 23:55:17,228 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ja7hlgad 2026-03-13 23:55:17,254 No soops found for time: 2021-08-22 12:37:53.342902 - 2021-08-22 15:01:53.357563 2026-03-13 23:55:17,347 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/22/CAL/solo_CAL_stix-cal-energy_20210822T123753-20210822T150153_V02.fits 2026-03-13 23:55:17,505 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_78i4df4s 2026-03-13 23:55:17,506 Read config from in: /tmp/ecc_context_ecc_cfg_1_78i4df4s/post_ecc.ini 2026-03-13 23:55:18,746 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_78i4df4s/solo_L1_stix-cal-energy_20210825_V03_ecc_in.fits 2026-03-14 00:04:22,887 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210825_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210825_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210825_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210825_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 00:04:30,303 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 00:04:30,311 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_78i4df4s 2026-03-14 00:04:30,335 No soops found for time: 2021-08-25 12:50:04.783993 - 2021-08-25 15:14:04.798655 2026-03-14 00:04:30,427 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/25/CAL/solo_CAL_stix-cal-energy_20210825T125004-20210825T151404_V02.fits 2026-03-14 00:04:30,587 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6zir6ae0 2026-03-14 00:04:30,587 Read config from in: /tmp/ecc_context_ecc_cfg_1_6zir6ae0/post_ecc.ini 2026-03-14 00:04:31,826 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6zir6ae0/solo_L1_stix-cal-energy_20210828_V03_ecc_in.fits 2026-03-14 00:13:30,492 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210828_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210828_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210828_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210828_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 00:13:37,072 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 00:13:37,080 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6zir6ae0 2026-03-14 00:13:37,107 No soops found for time: 2021-08-28 12:50:19.223868 - 2021-08-28 15:14:18.238528 2026-03-14 00:13:37,205 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/28/CAL/solo_CAL_stix-cal-energy_20210828T125019-20210828T151418_V02.fits 2026-03-14 00:13:37,370 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__thmngia 2026-03-14 00:13:37,370 Read config from in: /tmp/ecc_context_ecc_cfg_1__thmngia/post_ecc.ini 2026-03-14 00:13:38,626 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__thmngia/solo_L1_stix-cal-energy_20210809_V03_ecc_in.fits 2026-03-14 00:22:31,876 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210809_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210809_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210809_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210809_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 00:22:37,794 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 00:22:37,800 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__thmngia 2026-03-14 00:22:37,826 No soops found for time: 2021-08-09 12:27:01.437651 - 2021-08-09 14:51:02.452315 2026-03-14 00:22:37,925 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/09/CAL/solo_CAL_stix-cal-energy_20210809T122701-20210809T145102_V02.fits 2026-03-14 00:22:38,085 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_85_sjmz0 2026-03-14 00:22:38,086 Read config from in: /tmp/ecc_context_ecc_cfg_1_85_sjmz0/post_ecc.ini 2026-03-14 00:22:39,321 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_85_sjmz0/solo_L1_stix-cal-energy_20210802_V03_ecc_in.fits 2026-03-14 00:31:41,207 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210802_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210802_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210802_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210802_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 00:31:47,157 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 00:31:47,164 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_85_sjmz0 2026-03-14 00:31:47,190 No soops found for time: 2021-08-02 00:14:00.336702 - 2021-08-02 02:38:10.351381 2026-03-14 00:31:47,285 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/02/CAL/solo_CAL_stix-cal-energy_20210802T001400-20210802T023810_V02.fits 2026-03-14 00:31:47,443 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4m3e8amp 2026-03-14 00:31:47,444 Read config from in: /tmp/ecc_context_ecc_cfg_1_4m3e8amp/post_ecc.ini 2026-03-14 00:31:48,686 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4m3e8amp/solo_L1_stix-cal-energy_20210813_V03_ecc_in.fits 2026-03-14 00:40:45,895 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210813_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210813_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210813_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210813_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 00:40:51,842 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 00:40:51,853 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4m3e8amp 2026-03-14 00:40:51,880 No soops found for time: 2021-08-13 12:37:11.025152 - 2021-08-13 15:01:10.039812 2026-03-14 00:40:51,980 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/13/CAL/solo_CAL_stix-cal-energy_20210813T123711-20210813T150110_V02.fits 2026-03-14 00:40:52,153 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_elrgx69h 2026-03-14 00:40:52,154 Read config from in: /tmp/ecc_context_ecc_cfg_1_elrgx69h/post_ecc.ini 2026-03-14 00:40:53,399 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_elrgx69h/solo_L1_stix-cal-energy_20210815_V03_ecc_in.fits 2026-03-14 00:50:02,622 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210815_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210815_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210815_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210815_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 00:50:08,589 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 00:50:08,595 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_elrgx69h 2026-03-14 00:50:08,621 No soops found for time: 2021-08-15 12:37:20.318401 - 2021-08-15 15:01:20.333062 2026-03-14 00:50:08,713 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/15/CAL/solo_CAL_stix-cal-energy_20210815T123720-20210815T150120_V02.fits 2026-03-14 00:50:08,868 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q18oleh_ 2026-03-14 00:50:08,869 Read config from in: /tmp/ecc_context_ecc_cfg_1_q18oleh_/post_ecc.ini 2026-03-14 00:50:10,101 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q18oleh_/solo_L1_stix-cal-energy_20210804_V03_ecc_in.fits 2026-03-14 00:59:25,595 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210804_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210804_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210804_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210804_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 00:59:32,980 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 00:59:32,986 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q18oleh_ 2026-03-14 00:59:33,011 No soops found for time: 2021-08-04 00:20:08.630560 - 2021-08-04 02:44:08.645222 2026-03-14 00:59:33,104 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/08/04/CAL/solo_CAL_stix-cal-energy_20210804T002008-20210804T024408_V02.fits 2026-03-14 00:59:33,260 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5lfg4_07 2026-03-14 00:59:33,261 Read config from in: /tmp/ecc_context_ecc_cfg_1_5lfg4_07/post_ecc.ini 2026-03-14 00:59:34,488 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5lfg4_07/solo_L1_stix-cal-energy_20210530_V03_ecc_in.fits 2026-03-14 01:08:40,748 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210530_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210530_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210530_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210530_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 01:08:46,641 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 01:08:46,650 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5lfg4_07 2026-03-14 01:08:46,675 No soops found for time: 2021-05-30 05:09:58.103369 - 2021-05-30 07:33:58.117686 2026-03-14 01:08:46,768 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/30/CAL/solo_CAL_stix-cal-energy_20210530T050958-20210530T073358_V02.fits 2026-03-14 01:08:46,927 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sr0qlpw6 2026-03-14 01:08:46,927 Read config from in: /tmp/ecc_context_ecc_cfg_1_sr0qlpw6/post_ecc.ini 2026-03-14 01:08:48,164 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sr0qlpw6/solo_L1_stix-cal-energy_20210510_V03_ecc_in.fits 2026-03-14 01:17:47,637 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210510_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210510_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210510_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210510_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 01:17:53,569 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 01:17:53,578 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sr0qlpw6 2026-03-14 01:17:53,603 No soops found for time: 2021-05-10 04:46:01.237451 - 2021-05-10 07:10:00.251767 2026-03-14 01:17:53,696 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/10/CAL/solo_CAL_stix-cal-energy_20210510T044601-20210510T071000_V02.fits 2026-03-14 01:17:54,122 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2aowm3sl 2026-03-14 01:17:54,122 Read config from in: /tmp/ecc_context_ecc_cfg_1_2aowm3sl/post_ecc.ini 2026-03-14 01:17:55,354 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2aowm3sl/solo_L1_stix-cal-energy_20210501_V03_ecc_in.fits 2026-03-14 01:26:56,500 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210501_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210501_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210501_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210501_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 01:27:02,524 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 01:27:02,534 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2aowm3sl 2026-03-14 01:27:02,563 No soops found for time: 2021-05-01 04:20:02.949549 - 2021-05-01 06:44:01.964112 2026-03-14 01:27:02,663 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/01/CAL/solo_CAL_stix-cal-energy_20210501T042002-20210501T064401_V02.fits 2026-03-14 01:27:02,838 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1gomol53 2026-03-14 01:27:02,838 Read config from in: /tmp/ecc_context_ecc_cfg_1_1gomol53/post_ecc.ini 2026-03-14 01:27:04,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1gomol53/solo_L1_stix-cal-energy_20210524_V03_ecc_in.fits 2026-03-14 01:36:02,321 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210524_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210524_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210524_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210524_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 01:36:08,220 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 01:36:08,226 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1gomol53 2026-03-14 01:36:08,252 No soops found for time: 2021-05-24 05:09:31.244263 - 2021-05-24 07:33:30.258579 2026-03-14 01:36:08,344 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/24/CAL/solo_CAL_stix-cal-energy_20210524T050931-20210524T073330_V02.fits 2026-03-14 01:36:08,499 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_401pdxro 2026-03-14 01:36:08,500 Read config from in: /tmp/ecc_context_ecc_cfg_1_401pdxro/post_ecc.ini 2026-03-14 01:36:09,745 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_401pdxro/solo_L1_stix-cal-energy_20210508_V03_ecc_in.fits 2026-03-14 01:45:10,223 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210508_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210508_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210508_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210508_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 01:45:16,136 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 01:45:16,142 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_401pdxro 2026-03-14 01:45:16,168 No soops found for time: 2021-05-08 04:35:02.950006 - 2021-05-08 06:59:02.964324 2026-03-14 01:45:16,259 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/08/CAL/solo_CAL_stix-cal-energy_20210508T043502-20210508T065902_V02.fits 2026-03-14 01:45:16,412 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dcmglp5p 2026-03-14 01:45:16,413 Read config from in: /tmp/ecc_context_ecc_cfg_1_dcmglp5p/post_ecc.ini 2026-03-14 01:45:19,022 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dcmglp5p/solo_L1_stix-cal-energy_20210505_V03_ecc_in.fits 2026-03-14 01:54:23,489 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210505_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210505_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210505_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210505_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 01:54:29,362 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 01:54:29,370 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dcmglp5p 2026-03-14 01:54:29,394 No soops found for time: 2021-05-05 04:34:50.520455 - 2021-05-05 06:58:49.534771 2026-03-14 01:54:29,486 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/05/CAL/solo_CAL_stix-cal-energy_20210505T043450-20210505T065849_V02.fits 2026-03-14 01:54:29,644 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p562nh8_ 2026-03-14 01:54:29,644 Read config from in: /tmp/ecc_context_ecc_cfg_1_p562nh8_/post_ecc.ini 2026-03-14 01:54:30,875 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p562nh8_/solo_L1_stix-cal-energy_20210514_V03_ecc_in.fits 2026-03-14 02:03:37,950 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210514_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210514_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210514_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210514_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 02:03:43,916 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 02:03:43,925 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p562nh8_ 2026-03-14 02:03:43,956 No soops found for time: 2021-05-14 04:46:21.810192 - 2021-05-14 07:10:21.824510 2026-03-14 02:03:44,050 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/14/CAL/solo_CAL_stix-cal-energy_20210514T044621-20210514T071021_V02.fits 2026-03-14 02:03:44,212 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g1ru1grp 2026-03-14 02:03:44,213 Read config from in: /tmp/ecc_context_ecc_cfg_1_g1ru1grp/post_ecc.ini 2026-03-14 02:03:45,451 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g1ru1grp/solo_L1_stix-cal-energy_20210507_V03_ecc_in.fits 2026-03-14 02:12:55,174 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210507_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210507_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210507_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210507_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 02:13:01,086 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 02:13:01,094 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g1ru1grp 2026-03-14 02:13:01,123 No soops found for time: 2021-05-07 04:34:58.806822 - 2021-05-07 06:58:57.821138 2026-03-14 02:13:01,217 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/07/CAL/solo_CAL_stix-cal-energy_20210507T043458-20210507T065857_V02.fits 2026-03-14 02:13:01,375 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1jfq1ibx 2026-03-14 02:13:01,376 Read config from in: /tmp/ecc_context_ecc_cfg_1_1jfq1ibx/post_ecc.ini 2026-03-14 02:13:02,613 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1jfq1ibx/solo_L1_stix-cal-energy_20210520_V03_ecc_in.fits 2026-03-14 02:22:17,213 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210520_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210520_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210520_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210520_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 02:22:23,141 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 02:22:23,148 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1jfq1ibx 2026-03-14 02:22:23,175 No soops found for time: 2021-05-20 04:57:14.670335 - 2021-05-20 07:21:13.684651 2026-03-14 02:22:23,270 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/20/CAL/solo_CAL_stix-cal-energy_20210520T045714-20210520T072113_V02.fits 2026-03-14 02:22:23,431 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l85h7ujp 2026-03-14 02:22:23,431 Read config from in: /tmp/ecc_context_ecc_cfg_1_l85h7ujp/post_ecc.ini 2026-03-14 02:22:24,670 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l85h7ujp/solo_L1_stix-cal-energy_20210506_V03_ecc_in.fits 2026-03-14 02:31:29,148 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210506_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210506_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210506_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210506_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 02:31:35,140 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 02:31:35,147 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l85h7ujp 2026-03-14 02:31:35,174 No soops found for time: 2021-05-06 04:34:54.663639 - 2021-05-06 06:58:53.677955 2026-03-14 02:31:35,268 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/06/CAL/solo_CAL_stix-cal-energy_20210506T043454-20210506T065853_V02.fits 2026-03-14 02:31:35,433 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jttmrx9t 2026-03-14 02:31:35,434 Read config from in: /tmp/ecc_context_ecc_cfg_1_jttmrx9t/post_ecc.ini 2026-03-14 02:31:36,674 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jttmrx9t/solo_L1_stix-cal-energy_20210503_V03_ecc_in.fits 2026-03-14 02:40:33,146 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210503_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210503_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210503_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210503_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 02:40:39,103 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 02:40:39,110 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jttmrx9t 2026-03-14 02:40:39,137 No soops found for time: 2021-05-03 04:34:41.242328 - 2021-05-03 06:58:40.256891 2026-03-14 02:40:39,232 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/03/CAL/solo_CAL_stix-cal-energy_20210503T043441-20210503T065840_V02.fits 2026-03-14 02:40:39,394 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hogcnr9_ 2026-03-14 02:40:39,395 Read config from in: /tmp/ecc_context_ecc_cfg_1_hogcnr9_/post_ecc.ini 2026-03-14 02:40:42,202 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hogcnr9_/solo_L1_stix-cal-energy_20210517_V03_ecc_in.fits 2026-03-14 02:49:36,865 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210517_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210517_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210517_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210517_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 02:49:42,809 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 02:49:42,817 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hogcnr9_ 2026-03-14 02:49:42,842 No soops found for time: 2021-05-17 04:57:01.240782 - 2021-05-17 07:21:00.255098 2026-03-14 02:49:42,935 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/17/CAL/solo_CAL_stix-cal-energy_20210517T045701-20210517T072100_V02.fits 2026-03-14 02:49:43,098 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ytsb17hz 2026-03-14 02:49:43,098 Read config from in: /tmp/ecc_context_ecc_cfg_1_ytsb17hz/post_ecc.ini 2026-03-14 02:49:44,330 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ytsb17hz/solo_L1_stix-cal-energy_20210531_V03_ecc_in.fits 2026-03-14 02:59:09,310 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210531_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210531_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210531_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210531_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 02:59:15,229 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 02:59:15,236 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ytsb17hz 2026-03-14 02:59:15,261 No soops found for time: 2021-05-31 05:10:03.246554 - 2021-05-31 07:11:02.258583 2026-03-14 02:59:15,353 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/31/CAL/solo_CAL_stix-cal-energy_20210531T051003-20210531T071102_V02.fits 2026-03-14 02:59:15,504 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lqqljc3g 2026-03-14 02:59:15,505 Read config from in: /tmp/ecc_context_ecc_cfg_1_lqqljc3g/post_ecc.ini 2026-03-14 02:59:16,732 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lqqljc3g/solo_L1_stix-cal-energy_20210518_V03_ecc_in.fits 2026-03-14 03:08:21,546 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210518_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210518_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210518_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210518_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 03:08:27,571 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 03:08:27,578 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lqqljc3g 2026-03-14 03:08:27,603 No soops found for time: 2021-05-18 04:57:05.383966 - 2021-05-18 07:21:05.398284 2026-03-14 03:08:27,696 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/18/CAL/solo_CAL_stix-cal-energy_20210518T045705-20210518T072105_V02.fits 2026-03-14 03:08:27,858 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qqmjpnnf 2026-03-14 03:08:27,859 Read config from in: /tmp/ecc_context_ecc_cfg_1_qqmjpnnf/post_ecc.ini 2026-03-14 03:08:29,100 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qqmjpnnf/solo_L1_stix-cal-energy_20210523_V03_ecc_in.fits 2026-03-14 03:17:37,062 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210523_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210523_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210523_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210523_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 03:17:43,008 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 03:17:43,015 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qqmjpnnf 2026-03-14 03:17:43,041 No soops found for time: 2021-05-23 04:57:27.099886 - 2021-05-23 07:21:27.114204 2026-03-14 03:17:43,132 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/23/CAL/solo_CAL_stix-cal-energy_20210523T045727-20210523T072127_V02.fits 2026-03-14 03:17:43,286 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d364tdh3 2026-03-14 03:17:43,287 Read config from in: /tmp/ecc_context_ecc_cfg_1_d364tdh3/post_ecc.ini 2026-03-14 03:17:44,518 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d364tdh3/solo_L1_stix-cal-energy_20210516_V03_ecc_in.fits 2026-03-14 03:26:46,096 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210516_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210516_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210516_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210516_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 03:26:52,045 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 03:26:52,051 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d364tdh3 2026-03-14 03:26:52,077 No soops found for time: 2021-05-16 04:46:32.096563 - 2021-05-16 07:10:31.110879 2026-03-14 03:26:52,172 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/16/CAL/solo_CAL_stix-cal-energy_20210516T044632-20210516T071031_V02.fits 2026-03-14 03:26:52,327 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9hp7fv53 2026-03-14 03:26:52,328 Read config from in: /tmp/ecc_context_ecc_cfg_1_9hp7fv53/post_ecc.ini 2026-03-14 03:26:53,590 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9hp7fv53/solo_L1_stix-cal-energy_20210521_V03_ecc_in.fits 2026-03-14 03:36:03,704 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210521_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210521_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210521_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210521_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 03:36:09,773 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 03:36:09,782 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9hp7fv53 2026-03-14 03:36:09,809 No soops found for time: 2021-05-21 04:57:18.813519 - 2021-05-21 07:21:18.827836 2026-03-14 03:36:09,905 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/21/CAL/solo_CAL_stix-cal-energy_20210521T045718-20210521T072118_V02.fits 2026-03-14 03:36:11,791 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_94yckgwu 2026-03-14 03:36:11,792 Read config from in: /tmp/ecc_context_ecc_cfg_1_94yckgwu/post_ecc.ini 2026-03-14 03:36:13,039 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_94yckgwu/solo_L1_stix-cal-energy_20210512_V03_ecc_in.fits 2026-03-14 03:45:17,543 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210512_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210512_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210512_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210512_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 03:45:23,498 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 03:45:23,506 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_94yckgwu 2026-03-14 03:45:23,531 No soops found for time: 2021-05-12 04:46:10.523820 - 2021-05-12 07:10:09.538136 2026-03-14 03:45:23,623 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/12/CAL/solo_CAL_stix-cal-energy_20210512T044610-20210512T071009_V02.fits 2026-03-14 03:45:23,785 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h_g7rqnv 2026-03-14 03:45:23,785 Read config from in: /tmp/ecc_context_ecc_cfg_1_h_g7rqnv/post_ecc.ini 2026-03-14 03:45:25,014 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h_g7rqnv/solo_L1_stix-cal-energy_20210527_V03_ecc_in.fits 2026-03-14 03:54:31,555 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210527_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210527_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210527_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210527_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 03:54:37,443 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 03:54:37,452 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h_g7rqnv 2026-03-14 03:54:37,478 No soops found for time: 2021-05-27 05:09:44.673816 - 2021-05-27 07:33:43.688132 2026-03-14 03:54:37,570 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/27/CAL/solo_CAL_stix-cal-energy_20210527T050944-20210527T073343_V02.fits 2026-03-14 03:54:37,728 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ri0undey 2026-03-14 03:54:37,729 Read config from in: /tmp/ecc_context_ecc_cfg_1_ri0undey/post_ecc.ini 2026-03-14 03:54:38,965 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ri0undey/solo_L1_stix-cal-energy_20210511_V03_ecc_in.fits 2026-03-14 04:03:43,898 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210511_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210511_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210511_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210511_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 04:03:49,788 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 04:03:49,795 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ri0undey 2026-03-14 04:03:49,819 No soops found for time: 2021-05-11 04:46:05.380634 - 2021-05-11 07:10:05.394952 2026-03-14 04:03:49,912 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/11/CAL/solo_CAL_stix-cal-energy_20210511T044605-20210511T071005_V02.fits 2026-03-14 04:03:50,071 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k7cdr4fp 2026-03-14 04:03:50,071 Read config from in: /tmp/ecc_context_ecc_cfg_1_k7cdr4fp/post_ecc.ini 2026-03-14 04:03:51,303 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k7cdr4fp/solo_L1_stix-cal-energy_20210526_V03_ecc_in.fits 2026-03-14 04:13:00,637 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210526_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210526_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210526_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210526_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 04:13:06,601 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 04:13:06,609 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k7cdr4fp 2026-03-14 04:13:06,637 No soops found for time: 2021-05-26 05:09:39.530630 - 2021-05-26 07:33:39.544948 2026-03-14 04:13:06,731 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/26/CAL/solo_CAL_stix-cal-energy_20210526T050939-20210526T073339_V02.fits 2026-03-14 04:13:06,887 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3q5hm7ch 2026-03-14 04:13:06,888 Read config from in: /tmp/ecc_context_ecc_cfg_1_3q5hm7ch/post_ecc.ini 2026-03-14 04:13:08,128 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3q5hm7ch/solo_L1_stix-cal-energy_20210519_V03_ecc_in.fits 2026-03-14 04:22:17,641 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210519_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210519_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210519_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210519_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 04:22:23,558 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 04:22:23,567 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3q5hm7ch 2026-03-14 04:22:23,593 No soops found for time: 2021-05-19 04:57:10.527151 - 2021-05-19 07:21:09.541467 2026-03-14 04:22:23,685 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/19/CAL/solo_CAL_stix-cal-energy_20210519T045710-20210519T072109_V02.fits 2026-03-14 04:22:23,840 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1w0i4x07 2026-03-14 04:22:23,841 Read config from in: /tmp/ecc_context_ecc_cfg_1_1w0i4x07/post_ecc.ini 2026-03-14 04:22:25,085 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1w0i4x07/solo_L1_stix-cal-energy_20210522_V03_ecc_in.fits 2026-03-14 04:31:44,843 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210522_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210522_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210522_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210522_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 04:31:52,324 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 04:31:52,331 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1w0i4x07 2026-03-14 04:31:52,355 No soops found for time: 2021-05-22 04:57:22.956702 - 2021-05-22 07:21:22.971020 2026-03-14 04:31:52,447 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/22/CAL/solo_CAL_stix-cal-energy_20210522T045722-20210522T072122_V02.fits 2026-03-14 04:31:52,606 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__26lf7ve 2026-03-14 04:31:52,607 Read config from in: /tmp/ecc_context_ecc_cfg_1__26lf7ve/post_ecc.ini 2026-03-14 04:31:53,828 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__26lf7ve/solo_L1_stix-cal-energy_20210525_V03_ecc_in.fits 2026-03-14 04:40:52,627 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210525_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210525_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210525_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210525_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 04:40:58,521 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 04:40:58,529 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__26lf7ve 2026-03-14 04:40:58,554 No soops found for time: 2021-05-25 05:09:35.387447 - 2021-05-25 07:33:34.401763 2026-03-14 04:40:58,646 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/25/CAL/solo_CAL_stix-cal-energy_20210525T050935-20210525T073334_V02.fits 2026-03-14 04:40:58,805 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ghxb968d 2026-03-14 04:40:58,806 Read config from in: /tmp/ecc_context_ecc_cfg_1_ghxb968d/post_ecc.ini 2026-03-14 04:41:00,035 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ghxb968d/solo_L1_stix-cal-energy_20210528_V03_ecc_in.fits 2026-03-14 04:50:01,217 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210528_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210528_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210528_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210528_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 04:50:07,139 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 04:50:07,146 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ghxb968d 2026-03-14 04:50:07,170 No soops found for time: 2021-05-28 05:09:48.816999 - 2021-05-28 07:33:48.831317 2026-03-14 04:50:07,261 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/28/CAL/solo_CAL_stix-cal-energy_20210528T050948-20210528T073348_V02.fits 2026-03-14 04:50:07,420 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lxjxxqb6 2026-03-14 04:50:07,421 Read config from in: /tmp/ecc_context_ecc_cfg_1_lxjxxqb6/post_ecc.ini 2026-03-14 04:50:08,658 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lxjxxqb6/solo_L1_stix-cal-energy_20210509_V03_ecc_in.fits 2026-03-14 04:59:17,074 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210509_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210509_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210509_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210509_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 04:59:22,973 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 04:59:22,979 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lxjxxqb6 2026-03-14 04:59:23,005 No soops found for time: 2021-05-09 04:35:07.093190 - 2021-05-09 06:59:07.107507 2026-03-14 04:59:23,097 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/09/CAL/solo_CAL_stix-cal-energy_20210509T043507-20210509T065907_V02.fits 2026-03-14 04:59:23,253 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c8_i39i_ 2026-03-14 04:59:23,253 Read config from in: /tmp/ecc_context_ecc_cfg_1_c8_i39i_/post_ecc.ini 2026-03-14 04:59:24,492 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c8_i39i_/solo_L1_stix-cal-energy_20210529_V03_ecc_in.fits 2026-03-14 05:08:28,225 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210529_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210529_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210529_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210529_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 05:08:34,180 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 05:08:34,187 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c8_i39i_ 2026-03-14 05:08:34,213 No soops found for time: 2021-05-29 05:09:53.960185 - 2021-05-29 07:33:52.974501 2026-03-14 05:08:34,305 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/29/CAL/solo_CAL_stix-cal-energy_20210529T050953-20210529T073352_V02.fits 2026-03-14 05:08:34,463 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h6cc8t9m 2026-03-14 05:08:34,463 Read config from in: /tmp/ecc_context_ecc_cfg_1_h6cc8t9m/post_ecc.ini 2026-03-14 05:08:35,701 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h6cc8t9m/solo_L1_stix-cal-energy_20210502_V03_ecc_in.fits 2026-03-14 05:17:34,498 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210502_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210502_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210502_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210502_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 05:17:40,418 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 05:17:40,424 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h6cc8t9m 2026-03-14 05:17:40,450 No soops found for time: 2021-05-02 04:20:07.095205 - 2021-05-02 06:44:06.109768 2026-03-14 05:17:40,543 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/02/CAL/solo_CAL_stix-cal-energy_20210502T042007-20210502T064406_V02.fits 2026-03-14 05:17:40,701 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_08dcg2ay 2026-03-14 05:17:40,702 Read config from in: /tmp/ecc_context_ecc_cfg_1_08dcg2ay/post_ecc.ini 2026-03-14 05:17:41,941 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_08dcg2ay/solo_L1_stix-cal-energy_20210513_V03_ecc_in.fits 2026-03-14 05:26:39,282 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210513_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210513_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210513_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210513_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 05:26:46,722 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 05:26:46,728 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_08dcg2ay 2026-03-14 05:26:46,753 No soops found for time: 2021-05-13 04:46:17.667008 - 2021-05-13 07:10:16.681324 2026-03-14 05:26:46,845 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/13/CAL/solo_CAL_stix-cal-energy_20210513T044617-20210513T071016_V02.fits 2026-03-14 05:26:47,001 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7iu7tlhy 2026-03-14 05:26:47,001 Read config from in: /tmp/ecc_context_ecc_cfg_1_7iu7tlhy/post_ecc.ini 2026-03-14 05:26:48,224 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7iu7tlhy/solo_L1_stix-cal-energy_20210515_V03_ecc_in.fits 2026-03-14 05:35:50,958 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210515_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210515_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210515_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210515_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 05:35:56,985 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 05:35:56,992 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7iu7tlhy 2026-03-14 05:35:57,018 No soops found for time: 2021-05-15 04:46:26.953377 - 2021-05-15 07:10:25.967693 2026-03-14 05:35:57,112 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/15/CAL/solo_CAL_stix-cal-energy_20210515T044626-20210515T071025_V02.fits 2026-03-14 05:35:57,268 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kh5owz7p 2026-03-14 05:35:57,269 Read config from in: /tmp/ecc_context_ecc_cfg_1_kh5owz7p/post_ecc.ini 2026-03-14 05:35:58,518 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kh5owz7p/solo_L1_stix-cal-energy_20210504_V03_ecc_in.fits 2026-03-14 05:45:12,927 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210504_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210504_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210504_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210504_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 05:45:18,837 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 05:45:18,844 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kh5owz7p 2026-03-14 05:45:18,870 No soops found for time: 2021-05-04 04:34:45.377270 - 2021-05-04 06:58:45.391587 2026-03-14 05:45:18,966 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/05/04/CAL/solo_CAL_stix-cal-energy_20210504T043445-20210504T065845_V02.fits 2026-03-14 05:45:19,129 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8go9hiil 2026-03-14 05:45:19,130 Read config from in: /tmp/ecc_context_ecc_cfg_1_8go9hiil/post_ecc.ini 2026-03-14 05:45:20,367 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8go9hiil/solo_L1_stix-cal-energy_20210730_V03_ecc_in.fits 2026-03-14 05:54:30,271 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210730_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210730_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210730_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210730_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 05:54:36,226 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 05:54:36,233 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8go9hiil 2026-03-14 05:54:36,257 No soops found for time: 2021-07-30 00:10:07.892460 - 2021-07-30 02:34:07.907036 2026-03-14 05:54:36,350 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/30/CAL/solo_CAL_stix-cal-energy_20210730T001007-20210730T023407_V02.fits 2026-03-14 05:54:36,510 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zl1g6fyk 2026-03-14 05:54:36,511 Read config from in: /tmp/ecc_context_ecc_cfg_1_zl1g6fyk/post_ecc.ini 2026-03-14 05:54:37,751 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zl1g6fyk/solo_L1_stix-cal-energy_20210710_V03_ecc_in.fits 2026-03-14 06:04:17,403 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210710_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210710_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210710_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210710_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 06:04:23,321 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 06:04:23,329 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zl1g6fyk 2026-03-14 06:04:23,353 No soops found for time: 2021-07-10 00:14:19.980862 - 2021-07-10 02:38:19.995366 2026-03-14 06:04:23,449 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/10/CAL/solo_CAL_stix-cal-energy_20210710T001419-20210710T023819_V02.fits 2026-03-14 06:04:23,604 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zncne5s8 2026-03-14 06:04:23,605 Read config from in: /tmp/ecc_context_ecc_cfg_1_zncne5s8/post_ecc.ini 2026-03-14 06:04:24,838 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zncne5s8/solo_L1_stix-cal-energy_20210701_V03_ecc_in.fits 2026-03-14 06:17:23,944 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210701_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210701_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210701_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210701_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 06:17:29,857 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 06:17:29,864 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zncne5s8 2026-03-14 06:17:29,889 No soops found for time: 2021-07-01 17:26:13.777711 - 2021-07-01 19:50:13.792107 2026-03-14 06:17:29,981 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/01/CAL/solo_CAL_stix-cal-energy_20210701T172613-20210701T195013_V02.fits 2026-03-14 06:17:30,141 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_20292m21 2026-03-14 06:17:30,141 Read config from in: /tmp/ecc_context_ecc_cfg_1_20292m21/post_ecc.ini 2026-03-14 06:17:31,377 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_20292m21/solo_L1_stix-cal-energy_20210724_V03_ecc_in.fits 2026-03-14 06:26:35,126 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210724_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210724_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210724_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210724_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 06:26:42,617 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 06:26:42,624 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_20292m21 2026-03-14 06:26:42,649 No soops found for time: 2021-07-24 00:35:30.020483 - 2021-07-24 02:59:29.035057 2026-03-14 06:26:42,741 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/24/CAL/solo_CAL_stix-cal-energy_20210724T003530-20210724T025929_V02.fits 2026-03-14 06:26:42,898 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_amfxvdln 2026-03-14 06:26:42,899 Read config from in: /tmp/ecc_context_ecc_cfg_1_amfxvdln/post_ecc.ini 2026-03-14 06:26:44,139 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_amfxvdln/solo_L1_stix-cal-energy_20210708_V03_ecc_in.fits 2026-03-14 06:35:45,474 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210708_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210708_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210708_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210708_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 06:35:52,137 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 06:35:52,145 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_amfxvdln 2026-03-14 06:35:52,172 No soops found for time: 2021-07-08 00:14:11.690773 - 2021-07-08 02:38:10.705275 2026-03-14 06:35:52,269 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/08/CAL/solo_CAL_stix-cal-energy_20210708T001411-20210708T023810_V02.fits 2026-03-14 06:35:52,442 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0o6a38s4 2026-03-14 06:35:52,442 Read config from in: /tmp/ecc_context_ecc_cfg_1_0o6a38s4/post_ecc.ini 2026-03-14 06:35:53,690 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0o6a38s4/solo_L1_stix-cal-energy_20210705_V03_ecc_in.fits 2026-03-14 06:44:59,215 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210705_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210705_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210705_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210705_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 06:45:05,332 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 06:45:05,340 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0o6a38s4 2026-03-14 06:45:05,369 No soops found for time: 2021-07-05 00:08:01.249766 - 2021-07-05 02:32:12.264181 2026-03-14 06:45:05,469 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/05/CAL/solo_CAL_stix-cal-energy_20210705T000801-20210705T023212_V02.fits 2026-03-14 06:45:05,625 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_su80bhwu 2026-03-14 06:45:05,626 Read config from in: /tmp/ecc_context_ecc_cfg_1_su80bhwu/post_ecc.ini 2026-03-14 06:45:06,899 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_su80bhwu/solo_L1_stix-cal-energy_20210714_V03_ecc_in.fits 2026-03-14 06:54:20,149 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210714_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210714_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210714_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210714_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 06:54:26,083 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 06:54:26,090 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_su80bhwu 2026-03-14 06:54:26,116 No soops found for time: 2021-07-14 00:53:32.564961 - 2021-07-14 03:17:31.579463 2026-03-14 06:54:26,209 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/14/CAL/solo_CAL_stix-cal-energy_20210714T005332-20210714T031731_V02.fits 2026-03-14 06:54:26,365 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f7x65htw 2026-03-14 06:54:26,365 Read config from in: /tmp/ecc_context_ecc_cfg_1_f7x65htw/post_ecc.ini 2026-03-14 06:54:27,606 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f7x65htw/solo_L1_stix-cal-energy_20210707_V03_ecc_in.fits 2026-03-14 07:03:23,104 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210707_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210707_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210707_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210707_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 07:03:29,029 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 07:03:29,037 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f7x65htw 2026-03-14 07:03:29,063 No soops found for time: 2021-07-07 00:14:07.545729 - 2021-07-07 02:38:06.560231 2026-03-14 07:03:29,156 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/07/CAL/solo_CAL_stix-cal-energy_20210707T001407-20210707T023806_V02.fits 2026-03-14 07:03:29,314 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t4fdpy__ 2026-03-14 07:03:29,314 Read config from in: /tmp/ecc_context_ecc_cfg_1_t4fdpy__/post_ecc.ini 2026-03-14 07:03:30,555 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t4fdpy__/solo_L1_stix-cal-energy_20210720_V03_ecc_in.fits 2026-03-14 07:12:38,133 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210720_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210720_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210720_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210720_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 07:12:44,115 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 07:12:44,121 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t4fdpy__ 2026-03-14 07:12:44,147 No soops found for time: 2021-07-20 00:35:11.437421 - 2021-07-20 02:59:10.451995 2026-03-14 07:12:44,241 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/20/CAL/solo_CAL_stix-cal-energy_20210720T003511-20210720T025910_V02.fits 2026-03-14 07:12:44,400 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qwvz4pf7 2026-03-14 07:12:44,400 Read config from in: /tmp/ecc_context_ecc_cfg_1_qwvz4pf7/post_ecc.ini 2026-03-14 07:12:45,646 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qwvz4pf7/solo_L1_stix-cal-energy_20210706_V03_ecc_in.fits 2026-03-14 07:21:55,972 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210706_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210706_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210706_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210706_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 07:22:03,488 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 07:22:03,495 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qwvz4pf7 2026-03-14 07:22:03,520 No soops found for time: 2021-07-06 00:14:02.394330 - 2021-07-06 02:38:02.408726 2026-03-14 07:22:03,613 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/06/CAL/solo_CAL_stix-cal-energy_20210706T001402-20210706T023802_V02.fits 2026-03-14 07:22:04,040 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oi6ndt55 2026-03-14 07:22:04,041 Read config from in: /tmp/ecc_context_ecc_cfg_1_oi6ndt55/post_ecc.ini 2026-03-14 07:22:05,319 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oi6ndt55/solo_L1_stix-cal-energy_20210703_V03_ecc_in.fits 2026-03-14 07:31:28,048 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210703_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210703_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210703_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210703_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 07:31:33,982 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 07:31:33,989 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oi6ndt55 2026-03-14 07:31:34,014 No soops found for time: 2021-07-03 17:26:23.065651 - 2021-07-03 19:50:23.080047 2026-03-14 07:31:34,107 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/03/CAL/solo_CAL_stix-cal-energy_20210703T172623-20210703T195023_V02.fits 2026-03-14 07:31:34,263 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gwjhxnw9 2026-03-14 07:31:34,263 Read config from in: /tmp/ecc_context_ecc_cfg_1_gwjhxnw9/post_ecc.ini 2026-03-14 07:31:35,495 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gwjhxnw9/solo_L1_stix-cal-energy_20210717_V03_ecc_in.fits 2026-03-14 07:40:35,100 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210717_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210717_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210717_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210717_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 07:40:41,138 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 07:40:41,145 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gwjhxnw9 2026-03-14 07:40:41,170 No soops found for time: 2021-07-17 00:53:46.000096 - 2021-07-17 03:17:45.014598 2026-03-14 07:40:41,266 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/17/CAL/solo_CAL_stix-cal-energy_20210717T005346-20210717T031745_V02.fits 2026-03-14 07:40:41,427 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p6ckmbix 2026-03-14 07:40:41,427 Read config from in: /tmp/ecc_context_ecc_cfg_1_p6ckmbix/post_ecc.ini 2026-03-14 07:40:42,685 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p6ckmbix/solo_L1_stix-cal-energy_20210731_V03_ecc_in.fits 2026-03-14 07:49:53,581 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210731_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210731_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210731_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210731_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 07:49:59,558 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 07:49:59,566 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p6ckmbix 2026-03-14 07:49:59,591 No soops found for time: 2021-07-31 00:10:13.043083 - 2021-07-31 02:34:12.057743 2026-03-14 07:49:59,685 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/31/CAL/solo_CAL_stix-cal-energy_20210731T001013-20210731T023412_V02.fits 2026-03-14 07:49:59,839 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x_pj4sxb 2026-03-14 07:49:59,840 Read config from in: /tmp/ecc_context_ecc_cfg_1_x_pj4sxb/post_ecc.ini 2026-03-14 07:50:01,076 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x_pj4sxb/solo_L1_stix-cal-energy_20210723_V03_ecc_in.fits 2026-03-14 07:59:10,733 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210723_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210723_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210723_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210723_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 07:59:16,674 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 07:59:16,681 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x_pj4sxb 2026-03-14 07:59:16,706 No soops found for time: 2021-07-23 00:35:24.874717 - 2021-07-23 02:59:24.889292 2026-03-14 07:59:16,798 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/23/CAL/solo_CAL_stix-cal-energy_20210723T003524-20210723T025924_V02.fits 2026-03-14 07:59:16,949 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__bh4wgd8 2026-03-14 07:59:16,949 Read config from in: /tmp/ecc_context_ecc_cfg_1__bh4wgd8/post_ecc.ini 2026-03-14 07:59:18,185 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__bh4wgd8/solo_L1_stix-cal-energy_20210716_V03_ecc_in.fits 2026-03-14 08:08:17,667 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210716_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210716_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210716_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210716_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 08:08:23,612 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 08:08:23,619 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__bh4wgd8 2026-03-14 08:08:23,645 No soops found for time: 2021-07-16 00:53:40.855050 - 2021-07-16 03:17:40.869554 2026-03-14 08:08:23,737 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/16/CAL/solo_CAL_stix-cal-energy_20210716T005340-20210716T031740_V02.fits 2026-03-14 08:08:23,897 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yshf7ma2 2026-03-14 08:08:23,898 Read config from in: /tmp/ecc_context_ecc_cfg_1_yshf7ma2/post_ecc.ini 2026-03-14 08:08:25,138 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yshf7ma2/solo_L1_stix-cal-energy_20210721_V03_ecc_in.fits 2026-03-14 08:17:31,849 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210721_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210721_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210721_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210721_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 08:17:39,119 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 08:17:39,142 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yshf7ma2 2026-03-14 08:17:39,169 No soops found for time: 2021-07-21 00:35:15.583186 - 2021-07-21 02:59:15.597762 2026-03-14 08:17:39,262 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/21/CAL/solo_CAL_stix-cal-energy_20210721T003515-20210721T025915_V02.fits 2026-03-14 08:17:39,417 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jsw1dhp6 2026-03-14 08:17:39,418 Read config from in: /tmp/ecc_context_ecc_cfg_1_jsw1dhp6/post_ecc.ini 2026-03-14 08:17:40,654 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jsw1dhp6/solo_L1_stix-cal-energy_20210712_V03_ecc_in.fits 2026-03-14 08:26:42,977 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210712_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210712_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210712_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210712_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 08:26:48,903 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 08:26:48,910 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jsw1dhp6 2026-03-14 08:26:48,937 No soops found for time: 2021-07-12 00:18:01.271308 - 2021-07-12 02:44:52.286099 2026-03-14 08:26:49,031 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/12/CAL/solo_CAL_stix-cal-energy_20210712T001801-20210712T024452_V02.fits 2026-03-14 08:26:49,188 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gzcbn2fh 2026-03-14 08:26:49,188 Read config from in: /tmp/ecc_context_ecc_cfg_1_gzcbn2fh/post_ecc.ini 2026-03-14 08:26:50,418 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gzcbn2fh/solo_L1_stix-cal-energy_20210727_V03_ecc_in.fits 2026-03-14 08:35:57,320 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210727_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210727_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210727_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210727_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 08:36:03,941 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 08:36:03,948 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gzcbn2fh 2026-03-14 08:36:03,977 No soops found for time: 2021-07-27 00:09:54.455165 - 2021-07-27 02:33:53.469739 2026-03-14 08:36:04,077 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/27/CAL/solo_CAL_stix-cal-energy_20210727T000954-20210727T023353_V02.fits 2026-03-14 08:36:04,245 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i_k6o23n 2026-03-14 08:36:04,246 Read config from in: /tmp/ecc_context_ecc_cfg_1_i_k6o23n/post_ecc.ini 2026-03-14 08:36:05,509 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i_k6o23n/solo_L1_stix-cal-energy_20210726_V03_ecc_in.fits 2026-03-14 08:45:07,129 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210726_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210726_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210726_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210726_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 08:45:13,103 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 08:45:13,111 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i_k6o23n 2026-03-14 08:45:13,144 No soops found for time: 2021-07-26 00:06:01.309014 - 2021-07-26 02:30:02.323591 2026-03-14 08:45:13,237 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/26/CAL/solo_CAL_stix-cal-energy_20210726T000601-20210726T023002_V02.fits 2026-03-14 08:45:13,402 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_npespqek 2026-03-14 08:45:13,402 Read config from in: /tmp/ecc_context_ecc_cfg_1_npespqek/post_ecc.ini 2026-03-14 08:45:14,653 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_npespqek/solo_L1_stix-cal-energy_20210719_V03_ecc_in.fits 2026-03-14 08:54:12,964 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210719_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210719_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210719_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210719_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 08:54:18,941 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 08:54:18,947 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_npespqek 2026-03-14 08:54:18,972 No soops found for time: 2021-07-19 00:29:11.287696 - 2021-07-19 02:53:12.302201 2026-03-14 08:54:19,065 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/19/CAL/solo_CAL_stix-cal-energy_20210719T002911-20210719T025312_V02.fits 2026-03-14 08:54:19,224 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qhpgmp23 2026-03-14 08:54:19,224 Read config from in: /tmp/ecc_context_ecc_cfg_1_qhpgmp23/post_ecc.ini 2026-03-14 08:54:20,463 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qhpgmp23/solo_L1_stix-cal-energy_20210722_V03_ecc_in.fits 2026-03-14 09:03:33,303 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210722_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210722_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210722_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210722_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 09:03:39,201 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 09:03:39,209 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qhpgmp23 2026-03-14 09:03:39,234 No soops found for time: 2021-07-22 00:35:20.728952 - 2021-07-22 02:59:19.743526 2026-03-14 09:03:39,327 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/22/CAL/solo_CAL_stix-cal-energy_20210722T003520-20210722T025919_V02.fits 2026-03-14 09:03:39,483 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_olhh_4uf 2026-03-14 09:03:39,484 Read config from in: /tmp/ecc_context_ecc_cfg_1_olhh_4uf/post_ecc.ini 2026-03-14 09:03:42,067 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_olhh_4uf/solo_L1_stix-cal-energy_20210728_V03_ecc_in.fits 2026-03-14 09:12:43,413 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210728_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210728_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210728_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210728_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 09:12:49,347 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 09:12:49,354 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_olhh_4uf 2026-03-14 09:12:49,381 No soops found for time: 2021-07-28 00:09:58.600929 - 2021-07-28 02:33:58.615505 2026-03-14 09:12:49,474 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/28/CAL/solo_CAL_stix-cal-energy_20210728T000958-20210728T023358_V02.fits 2026-03-14 09:12:49,626 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_982cihzm 2026-03-14 09:12:49,627 Read config from in: /tmp/ecc_context_ecc_cfg_1_982cihzm/post_ecc.ini 2026-03-14 09:12:50,858 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_982cihzm/solo_L1_stix-cal-energy_20210709_V03_ecc_in.fits 2026-03-14 09:21:55,060 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210709_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210709_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210709_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210709_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 09:22:00,990 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 09:22:00,997 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_982cihzm 2026-03-14 09:22:01,021 No soops found for time: 2021-07-09 00:14:15.835817 - 2021-07-09 02:38:15.850321 2026-03-14 09:22:01,113 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/09/CAL/solo_CAL_stix-cal-energy_20210709T001415-20210709T023815_V02.fits 2026-03-14 09:22:01,274 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_di9751_1 2026-03-14 09:22:01,275 Read config from in: /tmp/ecc_context_ecc_cfg_1_di9751_1/post_ecc.ini 2026-03-14 09:22:02,507 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_di9751_1/solo_L1_stix-cal-energy_20210729_V03_ecc_in.fits 2026-03-14 09:31:04,174 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210729_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210729_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210729_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210729_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 09:31:10,166 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 09:31:10,173 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_di9751_1 2026-03-14 09:31:10,197 No soops found for time: 2021-07-29 00:10:03.746695 - 2021-07-29 02:34:02.761269 2026-03-14 09:31:10,291 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/29/CAL/solo_CAL_stix-cal-energy_20210729T001003-20210729T023402_V02.fits 2026-03-14 09:31:10,447 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pkr1kg39 2026-03-14 09:31:10,448 Read config from in: /tmp/ecc_context_ecc_cfg_1_pkr1kg39/post_ecc.ini 2026-03-14 09:31:11,693 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pkr1kg39/solo_L1_stix-cal-energy_20210702_V03_ecc_in.fits 2026-03-14 09:40:17,550 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210702_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210702_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210702_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210702_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 09:40:23,553 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 09:40:23,560 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pkr1kg39 2026-03-14 09:40:23,586 No soops found for time: 2021-07-02 17:26:18.921681 - 2021-07-02 19:50:17.936076 2026-03-14 09:40:23,679 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/02/CAL/solo_CAL_stix-cal-energy_20210702T172618-20210702T195017_V02.fits 2026-03-14 09:40:23,837 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5pfpj67y 2026-03-14 09:40:23,837 Read config from in: /tmp/ecc_context_ecc_cfg_1_5pfpj67y/post_ecc.ini 2026-03-14 09:40:25,084 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5pfpj67y/solo_L1_stix-cal-energy_20210713_V03_ecc_in.fits 2026-03-14 09:49:31,099 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210713_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210713_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210713_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210713_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 09:49:37,033 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 09:49:37,040 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5pfpj67y 2026-03-14 09:49:37,067 No soops found for time: 2021-07-13 00:53:27.419915 - 2021-07-13 03:17:26.434417 2026-03-14 09:49:37,165 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/13/CAL/solo_CAL_stix-cal-energy_20210713T005327-20210713T031726_V02.fits 2026-03-14 09:49:37,330 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x3wex3mm 2026-03-14 09:49:37,331 Read config from in: /tmp/ecc_context_ecc_cfg_1_x3wex3mm/post_ecc.ini 2026-03-14 09:49:38,572 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x3wex3mm/solo_L1_stix-cal-energy_20210715_V03_ecc_in.fits 2026-03-14 09:58:50,586 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210715_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210715_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210715_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210715_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 09:58:56,552 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 09:58:56,559 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x3wex3mm 2026-03-14 09:58:56,584 No soops found for time: 2021-07-15 00:53:36.710006 - 2021-07-15 03:17:35.724508 2026-03-14 09:58:56,677 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/15/CAL/solo_CAL_stix-cal-energy_20210715T005336-20210715T031735_V02.fits 2026-03-14 09:58:56,835 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8w6eas84 2026-03-14 09:58:56,835 Read config from in: /tmp/ecc_context_ecc_cfg_1_8w6eas84/post_ecc.ini 2026-03-14 09:58:59,539 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8w6eas84/solo_L1_stix-cal-energy_20210704_V03_ecc_in.fits 2026-03-14 10:07:58,007 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210704_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210704_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210704_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210704_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 10:08:04,071 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 10:08:04,078 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8w6eas84 2026-03-14 10:08:04,102 No soops found for time: 2021-07-04 17:26:28.209621 - 2021-07-04 18:05:49.213555 2026-03-14 10:08:04,195 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/07/04/CAL/solo_CAL_stix-cal-energy_20210704T172628-20210704T180549_V02.fits 2026-03-14 10:08:04,353 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_aa9bs2sh 2026-03-14 10:08:04,354 Read config from in: /tmp/ecc_context_ecc_cfg_1_aa9bs2sh/post_ecc.ini 2026-03-14 10:08:05,589 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_aa9bs2sh/solo_L1_stix-cal-energy_20210630_V03_ecc_in.fits 2026-03-14 10:17:21,044 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210630_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210630_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210630_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210630_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 10:17:26,950 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 10:17:26,958 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_aa9bs2sh 2026-03-14 10:17:26,983 No soops found for time: 2021-06-30 17:26:09.633741 - 2021-06-30 19:50:08.648136 2026-03-14 10:17:27,076 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/30/CAL/solo_CAL_stix-cal-energy_20210630T172609-20210630T195008_V02.fits 2026-03-14 10:17:27,234 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_auvea6tf 2026-03-14 10:17:27,235 Read config from in: /tmp/ecc_context_ecc_cfg_1_auvea6tf/post_ecc.ini 2026-03-14 10:17:28,465 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_auvea6tf/solo_L1_stix-cal-energy_20210610_V03_ecc_in.fits 2026-03-14 10:26:38,757 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210610_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210610_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210610_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210610_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 10:26:44,673 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 10:26:44,680 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_auvea6tf 2026-03-14 10:26:44,704 No soops found for time: 2021-06-10 16:56:14.748538 - 2021-06-10 19:20:14.762855 2026-03-14 10:26:44,796 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/10/CAL/solo_CAL_stix-cal-energy_20210610T165614-20210610T192014_V02.fits 2026-03-14 10:26:44,952 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_za2mo7bk 2026-03-14 10:26:44,953 Read config from in: /tmp/ecc_context_ecc_cfg_1_za2mo7bk/post_ecc.ini 2026-03-14 10:26:46,192 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_za2mo7bk/solo_L1_stix-cal-energy_20210601_V03_ecc_in.fits 2026-03-14 10:35:37,582 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210601_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210601_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210601_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210601_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 10:35:43,477 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 10:35:43,484 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_za2mo7bk 2026-03-14 10:35:43,509 No soops found for time: 2021-06-01 12:11:00.431585 - 2021-06-01 14:35:00.445903 2026-03-14 10:35:43,602 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/01/CAL/solo_CAL_stix-cal-energy_20210601T121100-20210601T143500_V02.fits 2026-03-14 10:35:43,757 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1i_v0boj 2026-03-14 10:35:43,757 Read config from in: /tmp/ecc_context_ecc_cfg_1_1i_v0boj/post_ecc.ini 2026-03-14 10:35:44,999 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1i_v0boj/solo_L1_stix-cal-energy_20210624_V03_ecc_in.fits 2026-03-14 10:44:43,858 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210624_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210624_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210624_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210624_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 10:44:49,774 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 10:44:49,781 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1i_v0boj 2026-03-14 10:44:49,806 No soops found for time: 2021-06-24 20:14:49.786830 - 2021-06-24 22:06:27.797991 2026-03-14 10:44:49,900 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/24/CAL/solo_CAL_stix-cal-energy_20210624T201449-20210624T220627_V02.fits 2026-03-14 10:44:50,058 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_73y6c2us 2026-03-14 10:44:50,058 Read config from in: /tmp/ecc_context_ecc_cfg_1_73y6c2us/post_ecc.ini 2026-03-14 10:44:51,297 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_73y6c2us/solo_L1_stix-cal-energy_20210608_V03_ecc_in.fits 2026-03-14 10:53:48,081 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210608_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210608_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210608_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210608_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 10:53:55,380 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 10:53:55,389 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_73y6c2us 2026-03-14 10:53:55,414 No soops found for time: 2021-06-08 16:56:05.462169 - 2021-06-08 19:20:04.476485 2026-03-14 10:53:55,507 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/08/CAL/solo_CAL_stix-cal-energy_20210608T165605-20210608T192004_V02.fits 2026-03-14 10:53:55,667 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lm1t8_6s 2026-03-14 10:53:55,667 Read config from in: /tmp/ecc_context_ecc_cfg_1_lm1t8_6s/post_ecc.ini 2026-03-14 10:53:56,896 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lm1t8_6s/solo_L1_stix-cal-energy_20210605_V03_ecc_in.fits 2026-03-14 11:03:03,100 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210605_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210605_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210605_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210605_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 11:03:08,946 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 11:03:08,953 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lm1t8_6s 2026-03-14 11:03:08,976 No soops found for time: 2021-06-05 16:46:10.031651 - 2021-06-05 19:10:09.045967 2026-03-14 11:03:09,068 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/05/CAL/solo_CAL_stix-cal-energy_20210605T164610-20210605T191009_V02.fits 2026-03-14 11:03:09,212 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4buolv01 2026-03-14 11:03:09,213 Read config from in: /tmp/ecc_context_ecc_cfg_1_4buolv01/post_ecc.ini 2026-03-14 11:03:10,438 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4buolv01/solo_L1_stix-cal-energy_20210614_V03_ecc_in.fits 2026-03-14 11:12:09,581 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210614_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210614_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210614_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210614_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 11:12:15,509 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 11:12:15,515 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4buolv01 2026-03-14 11:12:15,540 No soops found for time: 2021-06-14 17:06:01.322217 - 2021-06-14 19:30:00.336533 2026-03-14 11:12:15,633 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/14/CAL/solo_CAL_stix-cal-energy_20210614T170601-20210614T193000_V02.fits 2026-03-14 11:12:15,789 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5bk5kc0c 2026-03-14 11:12:15,790 Read config from in: /tmp/ecc_context_ecc_cfg_1_5bk5kc0c/post_ecc.ini 2026-03-14 11:12:17,020 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5bk5kc0c/solo_L1_stix-cal-energy_20210607_V03_ecc_in.fits 2026-03-14 11:21:15,558 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210607_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210607_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210607_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210607_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 11:21:21,482 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 11:21:21,489 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5bk5kc0c 2026-03-14 11:21:21,514 No soops found for time: 2021-06-07 16:56:01.318985 - 2021-06-07 19:20:00.333301 2026-03-14 11:21:21,606 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/07/CAL/solo_CAL_stix-cal-energy_20210607T165601-20210607T192000_V02.fits 2026-03-14 11:21:21,762 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_47ztxubu 2026-03-14 11:21:21,763 Read config from in: /tmp/ecc_context_ecc_cfg_1_47ztxubu/post_ecc.ini 2026-03-14 11:21:23,003 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_47ztxubu/solo_L1_stix-cal-energy_20210620_V03_ecc_in.fits 2026-03-14 11:30:27,477 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210620_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210620_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210620_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210620_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 11:30:33,446 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 11:30:33,453 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_47ztxubu 2026-03-14 11:30:33,479 No soops found for time: 2021-06-20 17:06:28.192150 - 2021-06-20 19:30:27.206544 2026-03-14 11:30:33,572 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/20/CAL/solo_CAL_stix-cal-energy_20210620T170628-20210620T193027_V02.fits 2026-03-14 11:30:33,730 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_izlq2pgc 2026-03-14 11:30:33,730 Read config from in: /tmp/ecc_context_ecc_cfg_1_izlq2pgc/post_ecc.ini 2026-03-14 11:30:34,980 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_izlq2pgc/solo_L1_stix-cal-energy_20210606_V03_ecc_in.fits 2026-03-14 11:39:40,034 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210606_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210606_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210606_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210606_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 11:39:46,162 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 11:39:46,169 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_izlq2pgc 2026-03-14 11:39:46,194 No soops found for time: 2021-06-06 16:46:14.174835 - 2021-06-06 19:10:13.189151 2026-03-14 11:39:46,285 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/06/CAL/solo_CAL_stix-cal-energy_20210606T164614-20210606T191013_V02.fits 2026-03-14 11:39:46,444 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3_bocctn 2026-03-14 11:39:46,445 Read config from in: /tmp/ecc_context_ecc_cfg_1_3_bocctn/post_ecc.ini 2026-03-14 11:39:47,687 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3_bocctn/solo_L1_stix-cal-energy_20210603_V03_ecc_in.fits 2026-03-14 11:48:36,992 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210603_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210603_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210603_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210603_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 11:48:44,343 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 11:48:44,350 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3_bocctn 2026-03-14 11:48:44,374 No soops found for time: 2021-06-03 16:46:00.745282 - 2021-06-03 19:09:59.759598 2026-03-14 11:48:44,466 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/03/CAL/solo_CAL_stix-cal-energy_20210603T164600-20210603T190959_V02.fits 2026-03-14 11:48:44,620 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j8vdk3wi 2026-03-14 11:48:44,620 Read config from in: /tmp/ecc_context_ecc_cfg_1_j8vdk3wi/post_ecc.ini 2026-03-14 11:48:45,838 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j8vdk3wi/solo_L1_stix-cal-energy_20210617_V03_ecc_in.fits 2026-03-14 11:57:58,737 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210617_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210617_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210617_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210617_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 11:58:04,619 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 11:58:04,626 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j8vdk3wi 2026-03-14 11:58:04,651 No soops found for time: 2021-06-17 17:06:15.760242 - 2021-06-17 19:30:14.774637 2026-03-14 11:58:04,744 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/17/CAL/solo_CAL_stix-cal-energy_20210617T170615-20210617T193014_V02.fits 2026-03-14 11:58:04,901 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j6ms9_a9 2026-03-14 11:58:04,902 Read config from in: /tmp/ecc_context_ecc_cfg_1_j6ms9_a9/post_ecc.ini 2026-03-14 11:58:06,130 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j6ms9_a9/solo_L1_stix-cal-energy_20210618_V03_ecc_in.fits 2026-03-14 12:07:19,668 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210618_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210618_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210618_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210618_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 12:07:25,613 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 12:07:25,620 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j6ms9_a9 2026-03-14 12:07:25,645 No soops found for time: 2021-06-18 17:06:19.904212 - 2021-06-18 19:30:18.918606 2026-03-14 12:07:25,738 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/18/CAL/solo_CAL_stix-cal-energy_20210618T170619-20210618T193018_V02.fits 2026-03-14 12:07:25,945 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__4ka79zo 2026-03-14 12:07:25,946 Read config from in: /tmp/ecc_context_ecc_cfg_1__4ka79zo/post_ecc.ini 2026-03-14 12:07:27,186 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__4ka79zo/solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits 2026-03-14 12:07:46,783 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 0 is dead pixel 1 is dead pixel 2 is dead pixel 3 is dead pixel 4 is dead pixel 5 is dead pixel 6 is dead pixel 7 is dead pixel 8 is dead pixel 9 is dead pixel 10 is dead pixel 11 is dead pixel 12 is dead pixel 13 is dead pixel 14 is dead pixel 15 is dead pixel 16 is dead pixel 17 is dead pixel 18 is dead pixel 19 is dead pixel 20 is dead pixel 21 is dead pixel 22 is dead pixel 23 is dead pixel 25 is dead pixel 26 is dead pixel 27 is dead pixel 28 is dead pixel 29 is dead pixel 30 is dead pixel 31 is dead pixel 32 is dead pixel 33 is dead pixel 34 is dead pixel 35 is dead pixel 37 is dead pixel 38 is dead pixel 39 is dead pixel 40 is dead pixel 41 is dead pixel 42 is dead pixel 43 is dead pixel 44 is dead pixel 45 is dead pixel 46 is dead pixel 47 is dead pixel 49 is dead pixel 50 is dead pixel 51 is dead pixel 52 is dead pixel 53 is dead pixel 54 is dead pixel 55 is dead pixel 56 is dead pixel 57 is dead pixel 58 is dead pixel 59 is dead pixel 61 is dead pixel 62 is dead pixel 63 is dead pixel 64 is dead pixel 65 is dead pixel 66 is dead pixel 67 is dead pixel 68 is dead pixel 69 is dead pixel 70 is dead pixel 71 is dead pixel 73 is dead pixel 74 is dead pixel 75 is dead pixel 76 is dead pixel 77 is dead pixel 78 is dead pixel 79 is dead pixel 80 is dead pixel 81 is dead pixel 82 is dead pixel 83 is dead pixel 85 is dead pixel 86 is dead pixel 87 is dead pixel 88 is dead pixel 89 is dead pixel 90 is dead pixel 91 is dead pixel 92 is dead pixel 93 is dead pixel 94 is dead pixel 95 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead pixel 109 is dead pixel 110 is dead pixel 111 is dead pixel 112 is dead pixel 113 is dead pixel 114 is dead pixel 115 is dead pixel 116 is dead pixel 117 is dead pixel 118 is dead pixel 119 is dead pixel 121 is dead pixel 122 is dead pixel 123 is dead pixel 124 is dead pixel 125 is dead pixel 126 is dead pixel 127 is dead pixel 128 is dead pixel 129 is dead pixel 130 is dead pixel 131 is dead pixel 133 is dead pixel 134 is dead pixel 135 is dead pixel 136 is dead pixel 137 is dead pixel 138 is dead pixel 139 is dead pixel 140 is dead pixel 141 is dead pixel 142 is dead pixel 143 is dead pixel 145 is dead pixel 146 is dead pixel 147 is dead pixel 148 is dead pixel 149 is dead pixel 150 is dead pixel 151 is dead pixel 152 is dead pixel 153 is dead pixel 154 is dead pixel 155 is dead pixel 157 is dead pixel 158 is dead pixel 159 is dead pixel 160 is dead pixel 161 is dead pixel 162 is dead pixel 163 is dead pixel 164 is dead pixel 165 is dead pixel 166 is dead pixel 167 is dead pixel 169 is dead pixel 170 is dead pixel 171 is dead pixel 172 is dead pixel 173 is dead pixel 174 is dead pixel 175 is dead pixel 176 is dead pixel 177 is dead pixel 178 is dead pixel 179 is dead pixel 181 is dead pixel 182 is dead pixel 183 is dead pixel 184 is dead pixel 185 is dead pixel 186 is dead pixel 187 is dead pixel 188 is dead pixel 189 is dead pixel 190 is dead pixel 191 is dead pixel 193 is dead pixel 194 is dead pixel 195 is dead pixel 196 is dead pixel 197 is dead pixel 198 is dead pixel 199 is dead pixel 200 is dead pixel 201 is dead pixel 202 is dead pixel 203 is dead pixel 205 is dead pixel 206 is dead pixel 207 is dead pixel 208 is dead pixel 209 is dead pixel 210 is dead pixel 211 is dead pixel 212 is dead pixel 213 is dead pixel 214 is dead pixel 215 is dead pixel 216 is dead pixel 217 is dead pixel 218 is dead pixel 219 is dead pixel 220 is dead pixel 221 is dead pixel 222 is dead pixel 223 is dead pixel 224 is dead pixel 225 is dead pixel 226 is dead pixel 227 is dead pixel 229 is dead pixel 230 is dead pixel 231 is dead pixel 232 is dead pixel 233 is dead pixel 234 is dead pixel 235 is dead pixel 236 is dead pixel 237 is dead pixel 238 is dead pixel 239 is dead pixel 241 is dead pixel 242 is dead pixel 243 is dead pixel 244 is dead pixel 245 is dead pixel 246 is dead pixel 247 is dead pixel 248 is dead pixel 249 is dead pixel 250 is dead pixel 251 is dead pixel 252 is dead pixel 253 is dead pixel 254 is dead pixel 255 is dead pixel 256 is dead pixel 257 is dead pixel 258 is dead pixel 259 is dead pixel 260 is dead pixel 261 is dead pixel 262 is dead pixel 263 is dead pixel 264 is dead pixel 265 is dead pixel 266 is dead pixel 267 is dead pixel 268 is dead pixel 269 is dead pixel 270 is dead pixel 271 is dead pixel 272 is dead pixel 273 is dead pixel 274 is dead pixel 275 is dead pixel 277 is dead pixel 278 is dead pixel 279 is dead pixel 280 is dead pixel 281 is dead pixel 282 is dead pixel 283 is dead pixel 284 is dead pixel 285 is dead pixel 286 is dead pixel 287 is dead pixel 289 is dead pixel 290 is dead pixel 291 is dead pixel 292 is dead pixel 293 is dead pixel 294 is dead pixel 295 is dead pixel 296 is dead pixel 297 is dead pixel 298 is dead pixel 299 is dead pixel 301 is dead pixel 302 is dead pixel 303 is dead pixel 304 is dead pixel 305 is dead pixel 306 is dead pixel 307 is dead pixel 308 is dead pixel 309 is dead pixel 310 is dead pixel 311 is dead pixel 313 is dead pixel 314 is dead pixel 315 is dead pixel 316 is dead pixel 317 is dead pixel 318 is dead pixel 319 is dead pixel 320 is dead pixel 321 is dead pixel 322 is dead pixel 323 is dead pixel 324 is dead pixel 325 is dead pixel 326 is dead pixel 327 is dead pixel 328 is dead pixel 329 is dead pixel 330 is dead pixel 331 is dead pixel 332 is dead pixel 333 is dead pixel 334 is dead pixel 335 is dead pixel 337 is dead pixel 338 is dead pixel 339 is dead pixel 340 is dead pixel 341 is dead pixel 342 is dead pixel 343 is dead pixel 344 is dead pixel 345 is dead pixel 346 is dead pixel 347 is dead pixel 349 is dead pixel 350 is dead pixel 351 is dead pixel 352 is dead pixel 353 is dead pixel 354 is dead pixel 355 is dead pixel 356 is dead pixel 357 is dead pixel 358 is dead pixel 359 is dead pixel 361 is dead pixel 362 is dead pixel 363 is dead pixel 364 is dead pixel 365 is dead pixel 366 is dead pixel 367 is dead pixel 368 is dead pixel 369 is dead pixel 370 is dead pixel 371 is dead pixel 373 is dead pixel 374 is dead pixel 375 is dead pixel 376 is dead pixel 377 is dead pixel 378 is dead pixel 379 is dead pixel 380 is dead pixel 381 is dead pixel 382 is dead pixel 383 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 12:07:56,409 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 12:07:56,411 ECC result Gain_Cor 0.0 for DET 1 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,411 ECC result Gain_Cor 0.0 for DET 1 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,411 ECC result Gain_Cor 0.0 for DET 1 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,411 ECC result Gain_Cor 0.0 for DET 1 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,411 ECC result Gain_Cor 0.0 for DET 1 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 1 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 1 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 1 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 1 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 1 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 1 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 1 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 2 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 2 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,412 ECC result Gain_Cor 0.0 for DET 2 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 2 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,413 ECC result Gain_Cor 0.0 for DET 3 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 3 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,414 ECC result Gain_Cor 0.0 for DET 4 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,415 ECC result Gain_Cor 0.0 for DET 4 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,416 ECC result Gain_Cor 0.0 for DET 5 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,417 ECC result Gain_Cor 0.0 for DET 6 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 6 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,418 ECC result Gain_Cor 0.0 for DET 7 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 7 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,419 ECC result Gain_Cor 0.0 for DET 8 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 8 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,420 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,421 ECC result Gain_Cor 0.0 for DET 10 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 10 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 10 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,422 ECC result Gain_Cor 0.0 for DET 11 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 11 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 11 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 12 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 12 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 12 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 12 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 12 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 12 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 12 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,423 ECC result Gain_Cor 0.0 for DET 12 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 12 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 12 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 12 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 13 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 13 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 13 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 13 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 13 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 13 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 13 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,424 ECC result Gain_Cor 0.0 for DET 13 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 13 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 13 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 13 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 14 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 14 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 14 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 14 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 14 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 14 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,425 ECC result Gain_Cor 0.0 for DET 14 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 14 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 14 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 14 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 14 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 15 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 15 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 15 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 15 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 15 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 15 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,426 ECC result Gain_Cor 0.0 for DET 15 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 15 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 15 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 15 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 15 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 16 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 16 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 16 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 16 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 16 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 16 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,427 ECC result Gain_Cor 0.0 for DET 16 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 16 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 16 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 16 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 16 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 17 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 17 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 17 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 17 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 17 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,428 ECC result Gain_Cor 0.0 for DET 17 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 17 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 17 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 17 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 17 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 17 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 18 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 18 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 18 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 18 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 18 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,429 ECC result Gain_Cor 0.0 for DET 18 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 18 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 18 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 18 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 18 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 18 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 19 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 19 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 19 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 19 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,430 ECC result Gain_Cor 0.0 for DET 19 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 19 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 19 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 19 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 19 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 19 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 19 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 19 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 20 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 20 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 20 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,431 ECC result Gain_Cor 0.0 for DET 20 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 20 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 20 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 20 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 20 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 20 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 20 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 20 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 21 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 21 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 21 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,432 ECC result Gain_Cor 0.0 for DET 21 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 21 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 21 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 21 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 21 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 21 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 21 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 21 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 22 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 22 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 22 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,433 ECC result Gain_Cor 0.0 for DET 22 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 22 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 22 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 22 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 22 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 22 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 22 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 22 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 22 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 23 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,434 ECC result Gain_Cor 0.0 for DET 23 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 23 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,435 ECC result Gain_Cor 0.0 for DET 24 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,436 ECC result Gain_Cor 0.0 for DET 24 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,437 ECC result Gain_Cor 0.0 for DET 25 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,438 ECC result Gain_Cor 0.0 for DET 26 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,439 ECC result Gain_Cor 0.0 for DET 27 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 27 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,440 ECC result Gain_Cor 0.0 for DET 28 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 28 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 28 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 29 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 29 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 29 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 29 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 29 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 29 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 29 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,441 ECC result Gain_Cor 0.0 for DET 29 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 29 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 29 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 29 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 30 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 30 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 30 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 30 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 30 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 30 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 30 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,442 ECC result Gain_Cor 0.0 for DET 30 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 30 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,443 ECC result Gain_Cor 0.0 for DET 31 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 31 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 31 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,444 ECC result Gain_Cor 0.0 for DET 32 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,445 ECC result Gain_Cor 0.0 for DET 32 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,445 ECC result Gain_Cor 0.0 for DET 32 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-14 12:07:56,449 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__4ka79zo 2026-03-14 12:07:56,481 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ruypbtid 2026-03-14 12:07:56,482 Read config from in: /tmp/ecc_context_ecc_cfg_1_ruypbtid/post_ecc.ini 2026-03-14 12:07:57,729 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ruypbtid/solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits 2026-03-14 12:14:38,310 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 12:14:56,999 Run ecc post fit: replaced [92.2 %] gain offset pairs with 'better fits' 2026-03-14 12:14:57,001 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,001 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,001 ECC result Gain_Prime 0.0 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,001 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,001 ECC result Gain_Prime 0.0 for DET 4 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 7 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 8 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 12 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 13 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 14 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,002 ECC result Gain_Prime 0.0 for DET 15 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 17 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 18 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 20 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 21 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 21 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 22 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 24 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 25 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,003 ECC result Gain_Prime 0.0 for DET 25 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,004 ECC result Gain_Prime 0.0 for DET 26 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,004 ECC result Gain_Prime 0.0 for DET 28 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,004 ECC result Gain_Prime 0.0 for DET 29 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,004 ECC result Gain_Prime 0.0 for DET 30 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 12:14:57,009 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ruypbtid 2026-03-14 12:14:57,039 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l438p63x 2026-03-14 12:14:57,039 Read config from in: /tmp/ecc_context_ecc_cfg_1_l438p63x/post_ecc.ini 2026-03-14 12:14:58,278 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l438p63x/solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits 2026-03-14 12:23:54,122 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 12:24:00,073 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 12:24:00,080 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l438p63x 2026-03-14 12:24:00,099 No soops found for time: 2021-06-23 15:42:05.615601 - 2021-06-23 15:42:05.615601 2026-03-14 12:24:00,100 No observations found for time: 2021-06-23 15:42:05.615601 - 2021-06-23 15:42:05.615601 : SoopObservationType.ALL 2026-03-14 12:24:00,184 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/23/CAL/solo_CAL_stix-cal-energy_20210623T154205-20210623T154205_V02.fits 2026-03-14 12:24:00,220 No soops found for time: 2021-06-23 16:43:49.621773 - 2021-06-23 16:44:50.621875 2026-03-14 12:24:00,310 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/23/CAL/solo_CAL_stix-cal-energy_20210623T164349-20210623T164450_V02.fits 2026-03-14 12:24:00,345 No soops found for time: 2021-06-23 20:14:45.642861 - 2021-06-23 22:38:44.657256 2026-03-14 12:24:00,435 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/23/CAL/solo_CAL_stix-cal-energy_20210623T201445-20210623T223844_V02.fits 2026-03-14 12:24:00,594 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gb080tia 2026-03-14 12:24:00,594 Read config from in: /tmp/ecc_context_ecc_cfg_1_gb080tia/post_ecc.ini 2026-03-14 12:24:01,843 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gb080tia/solo_L1_stix-cal-energy_20210616_V03_ecc_in.fits 2026-03-14 12:33:06,366 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210616_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210616_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210616_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210616_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 12:33:13,839 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 12:33:13,847 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gb080tia 2026-03-14 12:33:13,872 No soops found for time: 2021-06-16 17:06:10.608586 - 2021-06-16 19:30:09.622902 2026-03-14 12:33:13,964 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/16/CAL/solo_CAL_stix-cal-energy_20210616T170610-20210616T193009_V02.fits 2026-03-14 12:33:14,119 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fexczzzd 2026-03-14 12:33:14,120 Read config from in: /tmp/ecc_context_ecc_cfg_1_fexczzzd/post_ecc.ini 2026-03-14 12:33:15,349 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fexczzzd/solo_L1_stix-cal-energy_20210621_V03_ecc_in.fits 2026-03-14 12:42:14,058 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210621_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210621_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210621_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210621_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 12:42:20,058 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 12:42:20,065 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fexczzzd 2026-03-14 12:42:20,090 No soops found for time: 2021-06-21 17:16:00.337065 - 2021-06-21 19:40:00.351462 2026-03-14 12:42:20,184 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/21/CAL/solo_CAL_stix-cal-energy_20210621T171600-20210621T194000_V02.fits 2026-03-14 12:42:20,340 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_azbijll6 2026-03-14 12:42:20,341 Read config from in: /tmp/ecc_context_ecc_cfg_1_azbijll6/post_ecc.ini 2026-03-14 12:42:21,581 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_azbijll6/solo_L1_stix-cal-energy_20210612_V03_ecc_in.fits 2026-03-14 12:51:27,070 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210612_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210612_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210612_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210612_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 12:51:33,010 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 12:51:33,018 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_azbijll6 2026-03-14 12:51:33,044 No soops found for time: 2021-06-12 16:56:24.034907 - 2021-06-12 19:20:23.049223 2026-03-14 12:51:33,138 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/12/CAL/solo_CAL_stix-cal-energy_20210612T165624-20210612T192023_V02.fits 2026-03-14 12:51:33,296 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mb1hwrl9 2026-03-14 12:51:33,297 Read config from in: /tmp/ecc_context_ecc_cfg_1_mb1hwrl9/post_ecc.ini 2026-03-14 12:51:34,536 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mb1hwrl9/solo_L1_stix-cal-energy_20210627_V03_ecc_in.fits 2026-03-14 13:00:45,360 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210627_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210627_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210627_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210627_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 13:00:51,278 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 13:00:51,285 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mb1hwrl9 2026-03-14 13:00:51,310 No soops found for time: 2021-06-27 14:58:04.187049 - 2021-06-27 17:22:04.201445 2026-03-14 13:00:51,403 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/27/CAL/solo_CAL_stix-cal-energy_20210627T145804-20210627T172204_V02.fits 2026-03-14 13:00:51,557 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cf6_yd6f 2026-03-14 13:00:51,558 Read config from in: /tmp/ecc_context_ecc_cfg_1_cf6_yd6f/post_ecc.ini 2026-03-14 13:00:52,809 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cf6_yd6f/solo_L1_stix-cal-energy_20210611_V03_ecc_in.fits 2026-03-14 13:10:00,316 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210611_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210611_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210611_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210611_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 13:10:06,264 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 13:10:06,271 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cf6_yd6f 2026-03-14 13:10:06,298 No soops found for time: 2021-06-11 16:56:19.891723 - 2021-06-11 19:20:18.906039 2026-03-14 13:10:06,391 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/11/CAL/solo_CAL_stix-cal-energy_20210611T165619-20210611T192018_V02.fits 2026-03-14 13:10:06,547 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4op4rp4i 2026-03-14 13:10:06,547 Read config from in: /tmp/ecc_context_ecc_cfg_1_4op4rp4i/post_ecc.ini 2026-03-14 13:10:07,783 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4op4rp4i/solo_L1_stix-cal-energy_20210626_V03_ecc_in.fits 2026-03-14 13:19:06,661 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210626_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210626_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210626_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210626_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 13:19:12,606 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 13:19:12,613 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4op4rp4i 2026-03-14 13:19:12,639 No soops found for time: 2021-06-26 14:58:00.043080 - 2021-06-26 17:21:59.057475 2026-03-14 13:19:12,731 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/26/CAL/solo_CAL_stix-cal-energy_20210626T145800-20210626T172159_V02.fits 2026-03-14 13:19:12,892 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x6qgjky2 2026-03-14 13:19:12,892 Read config from in: /tmp/ecc_context_ecc_cfg_1_x6qgjky2/post_ecc.ini 2026-03-14 13:19:14,134 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x6qgjky2/solo_L1_stix-cal-energy_20210619_V03_ecc_in.fits 2026-03-14 13:28:25,577 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210619_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210619_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210619_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210619_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 13:28:33,074 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 13:28:33,080 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x6qgjky2 2026-03-14 13:28:33,105 No soops found for time: 2021-06-19 17:06:24.048181 - 2021-06-19 19:30:23.062575 2026-03-14 13:28:33,199 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/19/CAL/solo_CAL_stix-cal-energy_20210619T170624-20210619T193023_V02.fits 2026-03-14 13:28:33,357 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zpai7wpt 2026-03-14 13:28:33,358 Read config from in: /tmp/ecc_context_ecc_cfg_1_zpai7wpt/post_ecc.ini 2026-03-14 13:28:34,587 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zpai7wpt/solo_L1_stix-cal-energy_20210622_V03_ecc_in.fits 2026-03-14 13:37:35,377 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210622_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210622_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210622_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210622_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 13:37:41,264 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 13:37:41,271 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zpai7wpt 2026-03-14 13:37:41,296 No soops found for time: 2021-06-22 17:16:05.481036 - 2021-06-22 19:07:28.492172 2026-03-14 13:37:41,390 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/22/CAL/solo_CAL_stix-cal-energy_20210622T171605-20210622T190728_V02.fits 2026-03-14 13:37:41,550 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xjonryup 2026-03-14 13:37:41,550 Read config from in: /tmp/ecc_context_ecc_cfg_1_xjonryup/post_ecc.ini 2026-03-14 13:37:42,788 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xjonryup/solo_L1_stix-cal-energy_20210625_V03_ecc_in.fits 2026-03-14 13:46:51,407 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210625_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210625_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210625_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210625_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 13:46:57,347 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 13:46:57,358 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xjonryup 2026-03-14 13:46:57,393 No soops found for time: 2021-06-25 14:57:54.899109 - 2021-06-25 17:21:53.913504 2026-03-14 13:46:57,491 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/25/CAL/solo_CAL_stix-cal-energy_20210625T145754-20210625T172153_V02.fits 2026-03-14 13:46:57,657 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ciwhpnf3 2026-03-14 13:46:57,659 Read config from in: /tmp/ecc_context_ecc_cfg_1_ciwhpnf3/post_ecc.ini 2026-03-14 13:46:58,899 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ciwhpnf3/solo_L1_stix-cal-energy_20210628_V03_ecc_in.fits 2026-03-14 13:55:59,813 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210628_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210628_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210628_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210628_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 13:56:05,778 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 13:56:05,785 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ciwhpnf3 2026-03-14 13:56:05,809 No soops found for time: 2021-06-28 17:26:01.345803 - 2021-06-28 19:50:00.360198 2026-03-14 13:56:05,902 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/28/CAL/solo_CAL_stix-cal-energy_20210628T172601-20210628T195000_V02.fits 2026-03-14 13:56:06,059 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qxqbj_0s 2026-03-14 13:56:06,059 Read config from in: /tmp/ecc_context_ecc_cfg_1_qxqbj_0s/post_ecc.ini 2026-03-14 13:56:07,298 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qxqbj_0s/solo_L1_stix-cal-energy_20210609_V03_ecc_in.fits 2026-03-14 14:05:11,653 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210609_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210609_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210609_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210609_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 14:05:17,584 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 14:05:17,591 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qxqbj_0s 2026-03-14 14:05:17,615 No soops found for time: 2021-06-09 16:56:10.605354 - 2021-06-09 19:20:09.619670 2026-03-14 14:05:17,707 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/09/CAL/solo_CAL_stix-cal-energy_20210609T165610-20210609T192009_V02.fits 2026-03-14 14:05:17,859 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1nnkfmmy 2026-03-14 14:05:17,860 Read config from in: /tmp/ecc_context_ecc_cfg_1_1nnkfmmy/post_ecc.ini 2026-03-14 14:05:19,099 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1nnkfmmy/solo_L1_stix-cal-energy_20210629_V03_ecc_in.fits 2026-03-14 14:14:25,645 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210629_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210629_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210629_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210629_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 14:14:31,580 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 14:14:31,588 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1nnkfmmy 2026-03-14 14:14:31,616 No soops found for time: 2021-06-29 17:26:04.489770 - 2021-06-29 19:50:04.504167 2026-03-14 14:14:31,710 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/29/CAL/solo_CAL_stix-cal-energy_20210629T172604-20210629T195004_V02.fits 2026-03-14 14:14:31,871 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5hfldp3n 2026-03-14 14:14:31,872 Read config from in: /tmp/ecc_context_ecc_cfg_1_5hfldp3n/post_ecc.ini 2026-03-14 14:14:34,554 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5hfldp3n/solo_L1_stix-cal-energy_20210602_V03_ecc_in.fits 2026-03-14 14:23:37,791 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210602_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210602_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210602_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210602_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 14:23:43,761 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 14:23:43,768 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5hfldp3n 2026-03-14 14:23:43,794 No soops found for time: 2021-06-02 12:11:05.574771 - 2021-06-02 13:38:58.583509 2026-03-14 14:23:43,887 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/02/CAL/solo_CAL_stix-cal-energy_20210602T121105-20210602T133858_V02.fits 2026-03-14 14:23:44,048 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__t1wjcc_ 2026-03-14 14:23:44,049 Read config from in: /tmp/ecc_context_ecc_cfg_1__t1wjcc_/post_ecc.ini 2026-03-14 14:23:45,279 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__t1wjcc_/solo_L1_stix-cal-energy_20210613_V03_ecc_in.fits 2026-03-14 14:32:47,275 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210613_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210613_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210613_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210613_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 14:32:53,283 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 14:32:53,290 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__t1wjcc_ 2026-03-14 14:32:53,316 No soops found for time: 2021-06-13 16:56:28.178091 - 2021-06-13 19:20:28.192408 2026-03-14 14:32:53,410 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/13/CAL/solo_CAL_stix-cal-energy_20210613T165628-20210613T192028_V02.fits 2026-03-14 14:32:53,567 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hjd1w3mk 2026-03-14 14:32:53,568 Read config from in: /tmp/ecc_context_ecc_cfg_1_hjd1w3mk/post_ecc.ini 2026-03-14 14:32:54,807 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hjd1w3mk/solo_L1_stix-cal-energy_20210615_V03_ecc_in.fits 2026-03-14 14:42:04,439 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210615_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210615_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210615_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210615_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 14:42:10,589 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 14:42:10,601 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hjd1w3mk 2026-03-14 14:42:10,633 No soops found for time: 2021-06-15 17:06:05.465401 - 2021-06-15 19:30:05.479719 2026-03-14 14:42:10,736 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/06/15/CAL/solo_CAL_stix-cal-energy_20210615T170605-20210615T193005_V02.fits 2026-03-14 14:42:10,898 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5w402_9m 2026-03-14 14:42:10,899 Read config from in: /tmp/ecc_context_ecc_cfg_1_5w402_9m/post_ecc.ini 2026-03-14 14:42:12,197 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5w402_9m/solo_L1_stix-cal-energy_20210330_V03_ecc_in.fits 2026-03-14 14:51:07,730 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210330_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210330_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210330_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210330_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 14:51:13,727 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 14:51:13,734 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5w402_9m 2026-03-14 14:51:13,759 No soops found for time: 2021-03-30 01:36:06.293477 - 2021-03-30 04:00:05.307996 2026-03-14 14:51:13,858 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/30/CAL/solo_CAL_stix-cal-energy_20210330T013606-20210330T040005_V02.fits 2026-03-14 14:51:14,021 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uoxvy9qr 2026-03-14 14:51:14,021 Read config from in: /tmp/ecc_context_ecc_cfg_1_uoxvy9qr/post_ecc.ini 2026-03-14 14:51:15,269 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uoxvy9qr/solo_L1_stix-cal-energy_20210310_V03_ecc_in.fits 2026-03-14 15:00:14,598 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210310_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210310_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210310_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210310_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 15:00:20,539 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 15:00:20,546 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uoxvy9qr 2026-03-14 15:00:20,571 No soops found for time: 2021-03-10 01:06:10.386393 - 2021-03-10 03:30:10.400974 2026-03-14 15:00:20,663 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/10/CAL/solo_CAL_stix-cal-energy_20210310T010610-20210310T033010_V02.fits 2026-03-14 15:00:20,823 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sb8rmwl2 2026-03-14 15:00:20,823 Read config from in: /tmp/ecc_context_ecc_cfg_1_sb8rmwl2/post_ecc.ini 2026-03-14 15:00:22,063 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sb8rmwl2/solo_L1_stix-cal-energy_20210301_V03_ecc_in.fits 2026-03-14 15:09:15,338 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210301_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210301_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210301_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210301_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 15:09:21,271 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 15:09:21,278 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sb8rmwl2 2026-03-14 15:09:21,304 No soops found for time: 2021-03-01 00:56:01.064592 - 2021-03-01 03:20:00.079253 2026-03-14 15:09:21,397 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/01/CAL/solo_CAL_stix-cal-energy_20210301T005601-20210301T032000_V02.fits 2026-03-14 15:09:21,559 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u9qq3067 2026-03-14 15:09:21,559 Read config from in: /tmp/ecc_context_ecc_cfg_1_u9qq3067/post_ecc.ini 2026-03-14 15:09:24,271 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u9qq3067/solo_L1_stix-cal-energy_20210324_V03_ecc_in.fits 2026-03-14 15:18:15,554 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210324_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210324_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210324_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210324_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 15:18:21,488 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 15:18:21,495 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u9qq3067 2026-03-14 15:18:21,520 No soops found for time: 2021-03-24 01:26:10.429715 - 2021-03-24 03:50:09.444294 2026-03-14 15:18:21,613 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/24/CAL/solo_CAL_stix-cal-energy_20210324T012610-20210324T035009_V02.fits 2026-03-14 15:18:21,772 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eic1_qr5 2026-03-14 15:18:21,772 Read config from in: /tmp/ecc_context_ecc_cfg_1_eic1_qr5/post_ecc.ini 2026-03-14 15:18:23,019 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eic1_qr5/solo_L1_stix-cal-energy_20210308_V03_ecc_in.fits 2026-03-14 15:27:22,124 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210308_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210308_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 15:27:28,016 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 15:27:28,023 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eic1_qr5 2026-03-14 15:27:28,048 No soops found for time: 2021-03-08 01:06:01.097736 - 2021-03-08 03:30:00.112387 2026-03-14 15:27:28,141 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/08/CAL/solo_CAL_stix-cal-energy_20210308T010601-20210308T033000_V02.fits 2026-03-14 15:27:28,307 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_anfbp1bw 2026-03-14 15:27:28,307 Read config from in: /tmp/ecc_context_ecc_cfg_1_anfbp1bw/post_ecc.ini 2026-03-14 15:27:29,537 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_anfbp1bw/solo_L1_stix-cal-energy_20210305_V03_ecc_in.fits 2026-03-14 15:36:35,470 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210305_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210305_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210305_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210305_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 15:36:41,367 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 15:36:41,374 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_anfbp1bw 2026-03-14 15:36:41,398 No soops found for time: 2021-03-05 00:56:19.657158 - 2021-03-05 03:20:18.671810 2026-03-14 15:36:41,491 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/05/CAL/solo_CAL_stix-cal-energy_20210305T005619-20210305T032018_V02.fits 2026-03-14 15:36:41,648 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oo4wwcod 2026-03-14 15:36:41,648 Read config from in: /tmp/ecc_context_ecc_cfg_1_oo4wwcod/post_ecc.ini 2026-03-14 15:36:42,881 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oo4wwcod/solo_L1_stix-cal-energy_20210307_V03_ecc_in.fits 2026-03-14 15:45:50,000 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210307_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210307_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210307_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210307_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 15:45:55,945 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 15:45:55,952 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oo4wwcod 2026-03-14 15:45:55,977 No soops found for time: 2021-03-07 00:56:27.950233 - 2021-03-07 03:20:26.964885 2026-03-14 15:45:56,070 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/07/CAL/solo_CAL_stix-cal-energy_20210307T005627-20210307T032026_V02.fits 2026-03-14 15:45:56,227 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nt3blzl5 2026-03-14 15:45:56,228 Read config from in: /tmp/ecc_context_ecc_cfg_1_nt3blzl5/post_ecc.ini 2026-03-14 15:45:57,470 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nt3blzl5/solo_L1_stix-cal-energy_20210320_V03_ecc_in.fits 2026-03-14 15:55:03,395 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210320_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210320_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210320_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210320_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 15:55:09,290 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 15:55:09,296 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nt3blzl5 2026-03-14 15:55:09,322 No soops found for time: 2021-03-20 01:16:22.845496 - 2021-03-20 03:40:22.860077 2026-03-14 15:55:09,414 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/20/CAL/solo_CAL_stix-cal-energy_20210320T011622-20210320T034022_V02.fits 2026-03-14 15:55:09,577 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c_1ezb_6 2026-03-14 15:55:09,578 Read config from in: /tmp/ecc_context_ecc_cfg_1_c_1ezb_6/post_ecc.ini 2026-03-14 15:55:10,817 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c_1ezb_6/solo_L1_stix-cal-energy_20210306_V03_ecc_in.fits 2026-03-14 16:04:15,329 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210306_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210306_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 16:04:21,498 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 16:04:21,512 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c_1ezb_6 2026-03-14 16:04:21,544 No soops found for time: 2021-03-06 00:56:23.803696 - 2021-03-06 03:20:22.818347 2026-03-14 16:04:21,644 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/06/CAL/solo_CAL_stix-cal-energy_20210306T005623-20210306T032022_V02.fits 2026-03-14 16:04:23,556 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_894iooa9 2026-03-14 16:04:23,557 Read config from in: /tmp/ecc_context_ecc_cfg_1_894iooa9/post_ecc.ini 2026-03-14 16:04:24,793 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_894iooa9/solo_L1_stix-cal-energy_20210303_V03_ecc_in.fits 2026-03-14 16:13:28,821 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210303_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210303_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210303_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210303_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 16:13:34,705 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 16:13:34,712 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_894iooa9 2026-03-14 16:13:34,736 No soops found for time: 2021-03-03 00:56:10.364082 - 2021-03-03 03:20:09.378733 2026-03-14 16:13:34,828 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/03/CAL/solo_CAL_stix-cal-energy_20210303T005610-20210303T032009_V02.fits 2026-03-14 16:13:35,006 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w0gaq7_1 2026-03-14 16:13:35,007 Read config from in: /tmp/ecc_context_ecc_cfg_1_w0gaq7_1/post_ecc.ini 2026-03-14 16:13:36,299 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w0gaq7_1/solo_L1_stix-cal-energy_20210317_V03_ecc_in.fits 2026-03-14 16:22:28,111 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210317_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210317_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 16:22:33,977 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 16:22:33,984 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w0gaq7_1 2026-03-14 16:22:34,009 No soops found for time: 2021-03-17 01:16:10.408054 - 2021-03-17 03:40:10.422635 2026-03-14 16:22:34,102 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/17/CAL/solo_CAL_stix-cal-energy_20210317T011610-20210317T034010_V02.fits 2026-03-14 16:22:34,260 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t31vfpsu 2026-03-14 16:22:34,260 Read config from in: /tmp/ecc_context_ecc_cfg_1_t31vfpsu/post_ecc.ini 2026-03-14 16:22:35,491 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t31vfpsu/solo_L1_stix-cal-energy_20210331_V03_ecc_in.fits 2026-03-14 16:31:32,129 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210331_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210331_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210331_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210331_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 16:31:38,030 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 16:31:38,041 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t31vfpsu 2026-03-14 16:31:38,068 No soops found for time: 2021-03-31 01:36:10.438686 - 2021-03-31 04:00:10.453207 2026-03-14 16:31:38,160 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/31/CAL/solo_CAL_stix-cal-energy_20210331T013610-20210331T040010_V02.fits 2026-03-14 16:31:38,315 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8jqxf27k 2026-03-14 16:31:38,316 Read config from in: /tmp/ecc_context_ecc_cfg_1_8jqxf27k/post_ecc.ini 2026-03-14 16:31:39,547 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8jqxf27k/solo_L1_stix-cal-energy_20210318_V03_ecc_in.fits 2026-03-14 16:40:33,898 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210318_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210318_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210318_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210318_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 16:40:39,831 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 16:40:39,837 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8jqxf27k 2026-03-14 16:40:39,862 No soops found for time: 2021-03-18 01:16:14.553868 - 2021-03-18 03:40:14.568449 2026-03-14 16:40:39,955 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/18/CAL/solo_CAL_stix-cal-energy_20210318T011614-20210318T034014_V02.fits 2026-03-14 16:40:40,116 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5nwsgm8b 2026-03-14 16:40:40,117 Read config from in: /tmp/ecc_context_ecc_cfg_1_5nwsgm8b/post_ecc.ini 2026-03-14 16:40:41,359 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5nwsgm8b/solo_L1_stix-cal-energy_20210323_V03_ecc_in.fits 2026-03-14 16:49:32,309 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210323_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210323_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210323_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210323_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 16:49:38,190 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 16:49:38,200 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5nwsgm8b 2026-03-14 16:49:38,229 No soops found for time: 2021-03-23 01:26:05.283900 - 2021-03-23 03:50:05.298480 2026-03-14 16:49:38,324 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/23/CAL/solo_CAL_stix-cal-energy_20210323T012605-20210323T035005_V02.fits 2026-03-14 16:49:38,490 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__x83m7tw 2026-03-14 16:49:38,491 Read config from in: /tmp/ecc_context_ecc_cfg_1__x83m7tw/post_ecc.ini 2026-03-14 16:49:39,730 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__x83m7tw/solo_L1_stix-cal-energy_20210316_V03_ecc_in.fits 2026-03-14 16:58:36,213 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210316_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210316_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210316_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210316_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 16:58:43,626 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 16:58:43,633 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__x83m7tw 2026-03-14 16:58:43,656 No soops found for time: 2021-03-16 01:16:06.262240 - 2021-03-16 03:40:05.276819 2026-03-14 16:58:43,747 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/16/CAL/solo_CAL_stix-cal-energy_20210316T011606-20210316T034005_V02.fits 2026-03-14 16:58:43,903 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5a17n84e 2026-03-14 16:58:43,903 Read config from in: /tmp/ecc_context_ecc_cfg_1_5a17n84e/post_ecc.ini 2026-03-14 16:58:45,139 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5a17n84e/solo_L1_stix-cal-energy_20210321_V03_ecc_in.fits 2026-03-14 17:07:52,004 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210321_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210321_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210321_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210321_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 17:07:57,931 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 17:07:57,940 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5a17n84e 2026-03-14 17:07:57,965 No soops found for time: 2021-03-21 01:16:27.991312 - 2021-03-21 03:40:27.005891 2026-03-14 17:07:58,059 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/21/CAL/solo_CAL_stix-cal-energy_20210321T011627-20210321T034027_V02.fits 2026-03-14 17:07:58,247 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_phc4mp7d 2026-03-14 17:07:58,247 Read config from in: /tmp/ecc_context_ecc_cfg_1_phc4mp7d/post_ecc.ini 2026-03-14 17:07:59,474 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_phc4mp7d/solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits 2026-03-14 17:16:58,821 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 17:17:04,888 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 17:17:04,896 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_phc4mp7d 2026-03-14 17:17:04,931 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8wh2kh51 2026-03-14 17:17:04,933 Read config from in: /tmp/ecc_context_ecc_cfg_1_8wh2kh51/post_ecc.ini 2026-03-14 17:17:06,193 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8wh2kh51/solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits 2026-03-14 17:26:07,883 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 17:26:13,944 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 17:26:13,956 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8wh2kh51 2026-03-14 17:26:13,986 No soops found for time: 2021-03-12 01:06:19.678023 - 2021-03-12 02:08:09.684284 2026-03-14 17:26:14,083 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/12/CAL/solo_CAL_stix-cal-energy_20210312T010619-20210312T020809_V02.fits 2026-03-14 17:26:14,119 No soops found for time: 2021-03-12 11:28:06.740981 - 2021-03-12 13:48:05.755155 2026-03-14 17:26:14,214 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/12/CAL/solo_CAL_stix-cal-energy_20210312T112806-20210312T134805_V02.fits 2026-03-14 17:26:14,390 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_al6pdbrv 2026-03-14 17:26:14,391 Read config from in: /tmp/ecc_context_ecc_cfg_1_al6pdbrv/post_ecc.ini 2026-03-14 17:26:15,655 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_al6pdbrv/solo_L1_stix-cal-energy_20210327_V03_ecc_in.fits 2026-03-14 17:35:25,783 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210327_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210327_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210327_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210327_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 17:35:31,710 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 17:35:31,716 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_al6pdbrv 2026-03-14 17:35:31,743 Soop found: SOOP 2026-03-14 17:35:31,743 Soop found: SOOP 2026-03-14 17:35:31,839 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/27/CAL/solo_CAL_stix-cal-energy_20210327T012622-20210327T035022_V02.fits 2026-03-14 17:35:31,998 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m9ig5hvl 2026-03-14 17:35:31,999 Read config from in: /tmp/ecc_context_ecc_cfg_1_m9ig5hvl/post_ecc.ini 2026-03-14 17:35:33,241 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m9ig5hvl/solo_L1_stix-cal-energy_20210311_V03_ecc_in.fits 2026-03-14 17:44:27,022 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210311_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210311_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210311_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210311_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 17:44:33,068 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 17:44:33,079 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m9ig5hvl 2026-03-14 17:44:33,105 No soops found for time: 2021-03-11 01:06:15.532209 - 2021-03-11 03:30:14.546788 2026-03-14 17:44:33,200 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/11/CAL/solo_CAL_stix-cal-energy_20210311T010615-20210311T033014_V02.fits 2026-03-14 17:44:33,359 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6308y5pa 2026-03-14 17:44:33,360 Read config from in: /tmp/ecc_context_ecc_cfg_1_6308y5pa/post_ecc.ini 2026-03-14 17:44:34,609 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6308y5pa/solo_L1_stix-cal-energy_20210326_V03_ecc_in.fits 2026-03-14 17:53:36,600 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210326_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210326_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210326_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210326_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 17:53:43,987 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 17:53:43,993 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6308y5pa 2026-03-14 17:53:44,016 Soop found: SOOP 2026-03-14 17:53:44,109 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/26/CAL/solo_CAL_stix-cal-energy_20210326T012618-20210326T035018_V02.fits 2026-03-14 17:53:44,269 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xyrmxojm 2026-03-14 17:53:44,269 Read config from in: /tmp/ecc_context_ecc_cfg_1_xyrmxojm/post_ecc.ini 2026-03-14 17:53:45,507 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xyrmxojm/solo_L1_stix-cal-energy_20210319_V03_ecc_in.fits 2026-03-14 18:02:44,814 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210319_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210319_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 18:02:50,709 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 18:02:50,717 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xyrmxojm 2026-03-14 18:02:50,741 No soops found for time: 2021-03-19 01:16:19.699684 - 2021-03-19 03:40:18.714263 2026-03-14 18:02:50,832 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/19/CAL/solo_CAL_stix-cal-energy_20210319T011619-20210319T034018_V02.fits 2026-03-14 18:02:50,990 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tyfnddxu 2026-03-14 18:02:50,990 Read config from in: /tmp/ecc_context_ecc_cfg_1_tyfnddxu/post_ecc.ini 2026-03-14 18:02:52,233 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tyfnddxu/solo_L1_stix-cal-energy_20210322_V03_ecc_in.fits 2026-03-14 18:11:46,690 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210322_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210322_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210322_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210322_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 18:11:52,680 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 18:11:52,687 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tyfnddxu 2026-03-14 18:11:52,712 No soops found for time: 2021-03-22 01:26:01.138086 - 2021-03-22 03:50:00.152665 2026-03-14 18:11:52,806 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/22/CAL/solo_CAL_stix-cal-energy_20210322T012601-20210322T035000_V02.fits 2026-03-14 18:11:52,966 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2x0z1olb 2026-03-14 18:11:52,967 Read config from in: /tmp/ecc_context_ecc_cfg_1_2x0z1olb/post_ecc.ini 2026-03-14 18:11:54,206 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2x0z1olb/solo_L1_stix-cal-energy_20210325_V03_ecc_in.fits 2026-03-14 18:20:58,498 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210325_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210325_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210325_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210325_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 18:21:04,441 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 18:21:04,449 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2x0z1olb 2026-03-14 18:21:04,473 Soop found: SOOP 2026-03-14 18:21:04,566 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/25/CAL/solo_CAL_stix-cal-energy_20210325T012614-20210325T035013_V02.fits 2026-03-14 18:21:04,725 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yig2kz1p 2026-03-14 18:21:04,726 Read config from in: /tmp/ecc_context_ecc_cfg_1_yig2kz1p/post_ecc.ini 2026-03-14 18:21:05,963 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yig2kz1p/solo_L1_stix-cal-energy_20210328_V03_ecc_in.fits 2026-03-14 18:30:05,802 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210328_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210328_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210328_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210328_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 18:30:11,771 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 18:30:11,780 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yig2kz1p 2026-03-14 18:30:11,806 Soop found: SOOP 2026-03-14 18:30:11,900 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/28/CAL/solo_CAL_stix-cal-energy_20210328T012628-20210328T035027_V02.fits 2026-03-14 18:30:12,066 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dl3j_qdw 2026-03-14 18:30:12,067 Read config from in: /tmp/ecc_context_ecc_cfg_1_dl3j_qdw/post_ecc.ini 2026-03-14 18:30:13,318 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dl3j_qdw/solo_L1_stix-cal-energy_20210309_V03_ecc_in.fits 2026-03-14 18:39:09,004 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210309_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210309_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210309_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210309_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 18:39:15,127 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 18:39:15,134 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dl3j_qdw 2026-03-14 18:39:15,159 No soops found for time: 2021-03-09 01:06:06.240579 - 2021-03-09 03:30:05.255158 2026-03-14 18:39:15,252 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/09/CAL/solo_CAL_stix-cal-energy_20210309T010606-20210309T033005_V02.fits 2026-03-14 18:39:15,405 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vhqzgwmb 2026-03-14 18:39:15,405 Read config from in: /tmp/ecc_context_ecc_cfg_1_vhqzgwmb/post_ecc.ini 2026-03-14 18:39:18,003 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vhqzgwmb/solo_L1_stix-cal-energy_20210329_V03_ecc_in.fits 2026-03-14 18:48:11,376 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210329_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210329_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210329_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210329_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 18:48:17,293 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 18:48:17,301 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vhqzgwmb 2026-03-14 18:48:17,325 Soop found: SOOP 2026-03-14 18:48:17,419 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/29/CAL/solo_CAL_stix-cal-energy_20210329T013601-20210329T040000_V02.fits 2026-03-14 18:48:17,576 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6q5j3l9m 2026-03-14 18:48:17,576 Read config from in: /tmp/ecc_context_ecc_cfg_1_6q5j3l9m/post_ecc.ini 2026-03-14 18:48:18,795 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6q5j3l9m/solo_L1_stix-cal-energy_20210302_V03_ecc_in.fits 2026-03-14 18:57:18,855 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210302_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210302_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210302_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210302_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 18:57:24,765 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 18:57:24,772 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6q5j3l9m 2026-03-14 18:57:24,795 No soops found for time: 2021-03-02 00:56:05.217543 - 2021-03-02 03:20:05.232196 2026-03-14 18:57:24,887 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/02/CAL/solo_CAL_stix-cal-energy_20210302T005605-20210302T032005_V02.fits 2026-03-14 18:57:25,326 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b5xvfwk1 2026-03-14 18:57:25,326 Read config from in: /tmp/ecc_context_ecc_cfg_1_b5xvfwk1/post_ecc.ini 2026-03-14 18:57:26,559 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b5xvfwk1/solo_L1_stix-cal-energy_20210313_V03_ecc_in.fits 2026-03-14 19:06:29,226 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210313_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210313_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210313_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210313_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 19:06:35,123 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 19:06:35,130 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b5xvfwk1 2026-03-14 19:06:35,155 No soops found for time: 2021-03-13 10:48:10.882745 - 2021-03-13 13:08:10.896921 2026-03-14 19:06:35,247 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/13/CAL/solo_CAL_stix-cal-energy_20210313T104810-20210313T130810_V02.fits 2026-03-14 19:06:35,400 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ucbi7n72 2026-03-14 19:06:35,400 Read config from in: /tmp/ecc_context_ecc_cfg_1_ucbi7n72/post_ecc.ini 2026-03-14 19:06:36,634 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ucbi7n72/solo_L1_stix-cal-energy_20210315_V03_ecc_in.fits 2026-03-14 19:15:33,780 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210315_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210315_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210315_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210315_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 19:15:39,713 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 19:15:39,722 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ucbi7n72 2026-03-14 19:15:39,745 No soops found for time: 2021-03-15 01:16:01.116425 - 2021-03-15 03:40:00.131004 2026-03-14 19:15:39,836 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/15/CAL/solo_CAL_stix-cal-energy_20210315T011601-20210315T034000_V02.fits 2026-03-14 19:15:39,994 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qwvc83zt 2026-03-14 19:15:39,995 Read config from in: /tmp/ecc_context_ecc_cfg_1_qwvc83zt/post_ecc.ini 2026-03-14 19:15:41,232 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qwvc83zt/solo_L1_stix-cal-energy_20210304_V03_ecc_in.fits 2026-03-14 19:24:48,371 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210304_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210304_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210304_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210304_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 19:24:54,246 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 19:24:54,253 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qwvc83zt 2026-03-14 19:24:54,278 No soops found for time: 2021-03-04 00:56:15.510621 - 2021-03-04 03:20:14.525272 2026-03-14 19:24:54,369 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/03/04/CAL/solo_CAL_stix-cal-energy_20210304T005615-20210304T032014_V02.fits 2026-03-14 19:24:54,506 Successfully read ELUT file: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/config/data/common/elut/elut_table_20211209.csv 2026-03-14 19:24:54,535 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vm8wmgpd 2026-03-14 19:24:54,535 Read config from in: /tmp/ecc_context_ecc_cfg_1_vm8wmgpd/post_ecc.ini 2026-03-14 19:24:55,775 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vm8wmgpd/solo_L1_stix-cal-energy_20211230_V03_ecc_in.fits 2026-03-14 19:33:58,166 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211230_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211230_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211230_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211230_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 19:34:04,312 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 19:34:04,319 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vm8wmgpd 2026-03-14 19:34:04,344 No soops found for time: 2021-12-30 07:31:15.428578 - 2021-12-30 09:55:14.443216 2026-03-14 19:34:04,445 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/30/CAL/solo_CAL_stix-cal-energy_20211230T073115-20211230T095514_V02.fits 2026-03-14 19:34:05,992 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6wpy1xio 2026-03-14 19:34:05,992 Read config from in: /tmp/ecc_context_ecc_cfg_1_6wpy1xio/post_ecc.ini 2026-03-14 19:34:07,236 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6wpy1xio/solo_L1_stix-cal-energy_20211210_V03_ecc_in.fits 2026-03-14 19:43:07,242 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211210_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211210_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 19:43:13,329 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 19:43:13,340 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6wpy1xio 2026-03-14 19:43:13,365 Soop found: SOOP 2026-03-14 19:43:13,458 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/10/CAL/solo_CAL_stix-cal-energy_20211210T201812-20211210T224211_V02.fits 2026-03-14 19:43:13,617 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_67t7mbez 2026-03-14 19:43:13,617 Read config from in: /tmp/ecc_context_ecc_cfg_1_67t7mbez/post_ecc.ini 2026-03-14 19:43:14,859 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_67t7mbez/solo_L1_stix-cal-energy_20211201_V03_ecc_in.fits 2026-03-14 19:52:11,293 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211201_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211201_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 19:52:17,397 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 19:52:17,404 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_67t7mbez 2026-03-14 19:52:17,428 No soops found for time: 2021-12-01 06:04:19.185963 - 2021-12-01 08:28:18.200435 2026-03-14 19:52:17,521 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/01/CAL/solo_CAL_stix-cal-energy_20211201T060419-20211201T082818_V02.fits 2026-03-14 19:52:17,676 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o50xk50k 2026-03-14 19:52:17,677 Read config from in: /tmp/ecc_context_ecc_cfg_1_o50xk50k/post_ecc.ini 2026-03-14 19:52:18,906 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o50xk50k/solo_L1_stix-cal-energy_20211224_V03_ecc_in.fits 2026-03-14 20:01:12,386 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211224_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211224_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 20:01:18,446 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 20:01:18,452 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o50xk50k 2026-03-14 20:01:18,477 Soop found: SOOP 2026-03-14 20:01:18,569 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/24/CAL/solo_CAL_stix-cal-energy_20211224T072119-20211224T094518_V02.fits 2026-03-14 20:01:18,729 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qz239k04 2026-03-14 20:01:18,729 Read config from in: /tmp/ecc_context_ecc_cfg_1_qz239k04/post_ecc.ini 2026-03-14 20:01:19,959 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qz239k04/solo_L1_stix-cal-energy_20211208_V03_ecc_in.fits 2026-03-14 20:10:25,814 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211208_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211208_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 20:10:31,876 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 20:10:31,883 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qz239k04 2026-03-14 20:10:31,909 Soop found: SOOP 2026-03-14 20:10:32,005 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/08/CAL/solo_CAL_stix-cal-energy_20211208T145812-20211208T170723_V02.fits 2026-03-14 20:10:32,166 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w_tpgne4 2026-03-14 20:10:32,167 Read config from in: /tmp/ecc_context_ecc_cfg_1_w_tpgne4/post_ecc.ini 2026-03-14 20:10:33,405 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w_tpgne4/solo_L1_stix-cal-energy_20211205_V03_ecc_in.fits 2026-03-14 20:19:31,790 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 20:19:37,728 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 20:19:37,734 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w_tpgne4 2026-03-14 20:19:37,760 Soop found: SOOP 2026-03-14 20:19:37,855 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/05/CAL/solo_CAL_stix-cal-energy_20211205T142610-20211205T165009_V02.fits 2026-03-14 20:19:38,019 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ntg74f5k 2026-03-14 20:19:38,020 Read config from in: /tmp/ecc_context_ecc_cfg_1_ntg74f5k/post_ecc.ini 2026-03-14 20:19:39,262 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ntg74f5k/solo_L1_stix-cal-energy_20211214_V03_ecc_in.fits 2026-03-14 20:28:36,978 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211214_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211214_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 20:28:44,607 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 20:28:44,614 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ntg74f5k 2026-03-14 20:28:44,638 Soop found: SOOP 2026-03-14 20:28:44,731 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/14/CAL/solo_CAL_stix-cal-energy_20211214T071101-20211214T093500_V02.fits 2026-03-14 20:28:44,888 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xki7zk5f 2026-03-14 20:28:44,889 Read config from in: /tmp/ecc_context_ecc_cfg_1_xki7zk5f/post_ecc.ini 2026-03-14 20:28:46,119 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xki7zk5f/solo_L1_stix-cal-energy_20211207_V03_ecc_in.fits 2026-03-14 20:37:36,809 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211207_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211207_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 20:37:42,777 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 20:37:42,788 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xki7zk5f 2026-03-14 20:37:42,812 Soop found: SOOP 2026-03-14 20:37:42,906 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/07/CAL/solo_CAL_stix-cal-energy_20211207T142619-20211207T165046_V02.fits 2026-03-14 20:37:43,064 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zpzt8yth 2026-03-14 20:37:43,064 Read config from in: /tmp/ecc_context_ecc_cfg_1_zpzt8yth/post_ecc.ini 2026-03-14 20:37:44,296 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zpzt8yth/solo_L1_stix-cal-energy_20211220_V03_ecc_in.fits 2026-03-14 20:46:27,904 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 20:46:33,993 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 20:46:33,999 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zpzt8yth 2026-03-14 20:46:34,025 Soop found: SOOP 2026-03-14 20:46:34,119 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/20/CAL/solo_CAL_stix-cal-energy_20211220T072100-20211220T094459_V02.fits 2026-03-14 20:46:34,275 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mv2r6i1y 2026-03-14 20:46:34,276 Read config from in: /tmp/ecc_context_ecc_cfg_1_mv2r6i1y/post_ecc.ini 2026-03-14 20:46:35,502 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mv2r6i1y/solo_L1_stix-cal-energy_20211206_V03_ecc_in.fits 2026-03-14 20:55:32,045 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 20:55:38,004 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 20:55:38,010 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mv2r6i1y 2026-03-14 20:55:38,036 Soop found: SOOP 2026-03-14 20:55:38,129 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/06/CAL/solo_CAL_stix-cal-energy_20211206T142614-20211206T165014_V02.fits 2026-03-14 20:55:38,282 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9kvkj30q 2026-03-14 20:55:38,282 Read config from in: /tmp/ecc_context_ecc_cfg_1_9kvkj30q/post_ecc.ini 2026-03-14 20:55:39,515 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9kvkj30q/solo_L1_stix-cal-energy_20211203_V03_ecc_in.fits 2026-03-14 21:04:45,885 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211203_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211203_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 21:04:51,840 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 21:04:51,847 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9kvkj30q 2026-03-14 21:04:51,873 Soop found: SOOP 2026-03-14 21:04:51,966 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/03/CAL/solo_CAL_stix-cal-energy_20211203T142600-20211203T165000_V02.fits 2026-03-14 21:04:52,122 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0ibrt0hc 2026-03-14 21:04:52,123 Read config from in: /tmp/ecc_context_ecc_cfg_1_0ibrt0hc/post_ecc.ini 2026-03-14 21:04:53,356 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0ibrt0hc/solo_L1_stix-cal-energy_20211217_V03_ecc_in.fits 2026-03-14 21:14:02,079 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211217_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211217_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 21:14:08,202 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 21:14:08,209 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0ibrt0hc 2026-03-14 21:14:08,239 Soop found: SOOP 2026-03-14 21:14:08,347 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/17/CAL/solo_CAL_stix-cal-energy_20211217T071112-20211217T093512_V02.fits 2026-03-14 21:14:08,545 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6wtd54aq 2026-03-14 21:14:08,546 Read config from in: /tmp/ecc_context_ecc_cfg_1_6wtd54aq/post_ecc.ini 2026-03-14 21:14:11,312 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6wtd54aq/solo_L1_stix-cal-energy_20211231_V03_ecc_in.fits 2026-03-14 21:23:16,897 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211231_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211231_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211231_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211231_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 21:23:22,912 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 21:23:22,920 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6wtd54aq 2026-03-14 21:23:22,944 No soops found for time: 2021-12-31 07:31:20.574987 - 2021-12-31 09:55:20.589627 2026-03-14 21:23:23,038 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/31/CAL/solo_CAL_stix-cal-energy_20211231T073120-20211231T095520_V02.fits 2026-03-14 21:23:23,196 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wuczg5fm 2026-03-14 21:23:23,196 Read config from in: /tmp/ecc_context_ecc_cfg_1_wuczg5fm/post_ecc.ini 2026-03-14 21:23:24,422 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wuczg5fm/solo_L1_stix-cal-energy_20211218_V03_ecc_in.fits 2026-03-14 21:32:17,232 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211218_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211218_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 21:32:23,273 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 21:32:23,279 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wuczg5fm 2026-03-14 21:32:23,304 Soop found: SOOP 2026-03-14 21:32:23,396 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/18/CAL/solo_CAL_stix-cal-energy_20211218T071117-20211218T093516_V02.fits 2026-03-14 21:32:23,554 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v2q61mr1 2026-03-14 21:32:23,555 Read config from in: /tmp/ecc_context_ecc_cfg_1_v2q61mr1/post_ecc.ini 2026-03-14 21:32:24,776 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v2q61mr1/solo_L1_stix-cal-energy_20211223_V03_ecc_in.fits 2026-03-14 21:41:32,250 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211223_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211223_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 21:41:38,311 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 21:41:38,318 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v2q61mr1 2026-03-14 21:41:38,342 Soop found: SOOP 2026-03-14 21:41:38,436 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/23/CAL/solo_CAL_stix-cal-energy_20211223T072114-20211223T094514_V02.fits 2026-03-14 21:41:38,591 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pm_4br1g 2026-03-14 21:41:38,592 Read config from in: /tmp/ecc_context_ecc_cfg_1_pm_4br1g/post_ecc.ini 2026-03-14 21:41:39,825 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pm_4br1g/solo_L1_stix-cal-energy_20211216_V03_ecc_in.fits 2026-03-14 21:50:31,039 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211216_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211216_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 21:50:37,159 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 21:50:37,167 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pm_4br1g 2026-03-14 21:50:37,191 Soop found: SOOP 2026-03-14 21:50:37,284 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/16/CAL/solo_CAL_stix-cal-energy_20211216T071108-20211216T093508_V02.fits 2026-03-14 21:50:37,440 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9gf8u8cd 2026-03-14 21:50:37,441 Read config from in: /tmp/ecc_context_ecc_cfg_1_9gf8u8cd/post_ecc.ini 2026-03-14 21:50:38,673 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9gf8u8cd/solo_L1_stix-cal-energy_20211221_V03_ecc_in.fits 2026-03-14 21:59:21,686 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211221_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211221_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 21:59:27,768 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 21:59:27,774 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9gf8u8cd 2026-03-14 21:59:27,800 Soop found: SOOP 2026-03-14 21:59:27,894 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/21/CAL/solo_CAL_stix-cal-energy_20211221T072106-20211221T094505_V02.fits 2026-03-14 21:59:28,053 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a40eofqe 2026-03-14 21:59:28,054 Read config from in: /tmp/ecc_context_ecc_cfg_1_a40eofqe/post_ecc.ini 2026-03-14 21:59:29,299 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a40eofqe/solo_L1_stix-cal-energy_20211212_V03_ecc_in.fits 2026-03-14 22:08:25,802 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211212_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211212_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 22:08:31,964 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 22:08:31,971 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a40eofqe 2026-03-14 22:08:31,996 Soop found: SOOP 2026-03-14 22:08:32,095 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/12/CAL/solo_CAL_stix-cal-energy_20211212T201820-20211212T211530_V02.fits 2026-03-14 22:08:33,682 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0e4_zka_ 2026-03-14 22:08:33,683 Read config from in: /tmp/ecc_context_ecc_cfg_1_0e4_zka_/post_ecc.ini 2026-03-14 22:08:34,910 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0e4_zka_/solo_L1_stix-cal-energy_20211227_V03_ecc_in.fits 2026-03-14 22:17:27,775 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211227_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211227_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 22:17:33,810 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 22:17:33,816 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0e4_zka_ 2026-03-14 22:17:33,841 No soops found for time: 2021-12-27 07:31:00.989352 - 2021-12-27 09:55:00.003991 2026-03-14 22:17:33,934 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/27/CAL/solo_CAL_stix-cal-energy_20211227T073100-20211227T095500_V02.fits 2026-03-14 22:17:34,098 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8opogni3 2026-03-14 22:17:34,099 Read config from in: /tmp/ecc_context_ecc_cfg_1_8opogni3/post_ecc.ini 2026-03-14 22:17:35,325 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8opogni3/solo_L1_stix-cal-energy_20211211_V03_ecc_in.fits 2026-03-14 22:26:25,614 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211211_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211211_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 22:26:31,657 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 22:26:31,666 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8opogni3 2026-03-14 22:26:31,692 Soop found: SOOP 2026-03-14 22:26:31,784 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/11/CAL/solo_CAL_stix-cal-energy_20211211T201816-20211211T224215_V02.fits 2026-03-14 22:26:31,952 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_11w7a0sq 2026-03-14 22:26:31,953 Read config from in: /tmp/ecc_context_ecc_cfg_1_11w7a0sq/post_ecc.ini 2026-03-14 22:26:33,212 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_11w7a0sq/solo_L1_stix-cal-energy_20211226_V03_ecc_in.fits 2026-03-14 22:35:29,037 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211226_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211226_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 22:35:35,062 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 22:35:35,071 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_11w7a0sq 2026-03-14 22:35:35,096 Soop found: SOOP 2026-03-14 22:35:35,190 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/26/CAL/solo_CAL_stix-cal-energy_20211226T072127-20211226T094527_V02.fits 2026-03-14 22:35:35,350 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_134zabiz 2026-03-14 22:35:35,351 Read config from in: /tmp/ecc_context_ecc_cfg_1_134zabiz/post_ecc.ini 2026-03-14 22:35:36,577 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_134zabiz/solo_L1_stix-cal-energy_20211219_V03_ecc_in.fits 2026-03-14 22:44:35,164 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211219_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211219_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 22:44:41,587 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 22:44:41,595 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_134zabiz 2026-03-14 22:44:41,621 Soop found: SOOP 2026-03-14 22:44:41,716 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/19/CAL/solo_CAL_stix-cal-energy_20211219T071121-20211219T093521_V02.fits 2026-03-14 22:44:41,878 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f92kf9kw 2026-03-14 22:44:41,879 Read config from in: /tmp/ecc_context_ecc_cfg_1_f92kf9kw/post_ecc.ini 2026-03-14 22:44:43,150 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f92kf9kw/solo_L1_stix-cal-energy_20211222_V03_ecc_in.fits 2026-03-14 22:53:42,632 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211222_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211222_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 22:53:48,666 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 22:53:48,673 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f92kf9kw 2026-03-14 22:53:48,698 Soop found: SOOP 2026-03-14 22:53:48,792 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/22/CAL/solo_CAL_stix-cal-energy_20211222T072110-20211222T094509_V02.fits 2026-03-14 22:53:48,948 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_js44y9yq 2026-03-14 22:53:48,949 Read config from in: /tmp/ecc_context_ecc_cfg_1_js44y9yq/post_ecc.ini 2026-03-14 22:53:50,175 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_js44y9yq/solo_L1_stix-cal-energy_20211225_V03_ecc_in.fits 2026-03-14 23:02:49,633 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211225_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211225_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 23:02:57,168 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 23:02:57,176 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_js44y9yq 2026-03-14 23:02:57,200 Soop found: SOOP 2026-03-14 23:02:57,298 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/25/CAL/solo_CAL_stix-cal-energy_20211225T072123-20211225T094523_V02.fits 2026-03-14 23:02:57,453 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wieuezyc 2026-03-14 23:02:57,454 Read config from in: /tmp/ecc_context_ecc_cfg_1_wieuezyc/post_ecc.ini 2026-03-14 23:02:58,681 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wieuezyc/solo_L1_stix-cal-energy_20211228_V03_ecc_in.fits 2026-03-14 23:12:08,397 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211228_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211228_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 23:12:14,469 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 23:12:14,477 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wieuezyc 2026-03-14 23:12:14,501 No soops found for time: 2021-12-28 07:31:06.135761 - 2021-12-28 09:55:05.150400 2026-03-14 23:12:14,595 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/28/CAL/solo_CAL_stix-cal-energy_20211228T073106-20211228T095505_V02.fits 2026-03-14 23:12:14,943 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bio97wdy 2026-03-14 23:12:14,944 Read config from in: /tmp/ecc_context_ecc_cfg_1_bio97wdy/post_ecc.ini 2026-03-14 23:12:16,178 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bio97wdy/solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits 2026-03-14 23:19:21,328 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 23:19:38,119 Run ecc post fit: replaced [92.4 %] gain offset pairs with 'better fits' 2026-03-14 23:19:38,121 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,122 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,122 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,122 ECC result Gain_Prime 0.0 for DET 3 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,122 ECC result Gain_Prime 0.0 for DET 4 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,122 ECC result Gain_Prime 0.0 for DET 5 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,122 ECC result Gain_Prime 0.0 for DET 5 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,122 ECC result Gain_Prime 0.0 for DET 6 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,122 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 7 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 9 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 10 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 11 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 11 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 13 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 13 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,123 ECC result Gain_Prime 0.0 for DET 15 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 16 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 21 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 25 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 26 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 27 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 27 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 27 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,124 ECC result Gain_Prime 0.0 for DET 28 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,125 ECC result Gain_Prime 0.0 for DET 30 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,125 ECC result Gain_Prime 0.0 for DET 32 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:19:38,129 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bio97wdy 2026-03-14 23:19:38,162 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pi2vjr5r 2026-03-14 23:19:38,162 Read config from in: /tmp/ecc_context_ecc_cfg_1_pi2vjr5r/post_ecc.ini 2026-03-14 23:19:39,435 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pi2vjr5r/solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits 2026-03-14 23:27:13,393 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 23:27:21,528 Run ecc post fit: replaced [99.0 %] gain offset pairs with 'better fits' 2026-03-14 23:27:21,530 ECC result Gain_Prime 0.0 for DET 6 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:27:21,530 ECC result Gain_Prime 0.0 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:27:21,530 ECC result Gain_Prime 0.0 for DET 23 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:27:21,530 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:27:21,535 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pi2vjr5r 2026-03-14 23:27:21,565 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vs40suc8 2026-03-14 23:27:21,566 Read config from in: /tmp/ecc_context_ecc_cfg_1_vs40suc8/post_ecc.ini 2026-03-14 23:27:22,816 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vs40suc8/solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits 2026-03-14 23:34:58,381 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 23:35:09,300 Run ecc post fit: replaced [96.6 %] gain offset pairs with 'better fits' 2026-03-14 23:35:09,302 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,302 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,302 ECC result Gain_Prime 0.0 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,302 ECC result Gain_Prime 0.0 for DET 3 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,302 ECC result Gain_Prime 0.0 for DET 10 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,302 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,302 ECC result Gain_Prime 0.0 for DET 14 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,303 ECC result Gain_Prime 0.0 for DET 19 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,303 ECC result Gain_Prime 0.0 for DET 27 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,303 ECC result Gain_Prime 0.0 for DET 28 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,303 ECC result Gain_Prime 0.0 for DET 29 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,303 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,303 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:35:09,308 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vs40suc8 2026-03-14 23:35:09,338 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pjsuur60 2026-03-14 23:35:09,339 Read config from in: /tmp/ecc_context_ecc_cfg_1_pjsuur60/post_ecc.ini 2026-03-14 23:35:10,578 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pjsuur60/solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits 2026-03-14 23:42:46,594 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 23:43:00,699 Run ecc post fit: replaced [94.5 %] gain offset pairs with 'better fits' 2026-03-14 23:43:00,701 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,701 ECC result Gain_Prime 0.0 for DET 1 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,701 ECC result Gain_Prime 0.0 for DET 3 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,701 ECC result Gain_Prime 0.0 for DET 4 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,701 ECC result Gain_Prime 0.0 for DET 4 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,701 ECC result Gain_Prime 0.0 for DET 5 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 5 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 8 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 9 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 10 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 10 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 14 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,702 ECC result Gain_Prime 0.0 for DET 16 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,703 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,703 ECC result Gain_Prime 0.0 for DET 19 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,703 ECC result Gain_Prime 0.0 for DET 19 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,703 ECC result Gain_Prime 0.0 for DET 21 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,703 ECC result Gain_Prime 0.0 for DET 31 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-14 23:43:00,707 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pjsuur60 2026-03-14 23:43:00,738 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5awzjm61 2026-03-14 23:43:00,738 Read config from in: /tmp/ecc_context_ecc_cfg_1_5awzjm61/post_ecc.ini 2026-03-14 23:43:03,506 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5awzjm61/solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits 2026-03-14 23:52:00,776 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-14 23:52:06,838 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-14 23:52:06,845 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5awzjm61 2026-03-14 23:52:06,870 Soop found: SOOP 2026-03-14 23:52:06,963 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/09/CAL/solo_CAL_stix-cal-energy_20211209T163137-20211209T163308_V02.fits 2026-03-14 23:52:06,999 Soop found: SOOP 2026-03-14 23:52:07,091 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/09/CAL/solo_CAL_stix-cal-energy_20211209T165553-20211209T165854_V02.fits 2026-03-14 23:52:07,126 Soop found: SOOP 2026-03-14 23:52:07,218 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/09/CAL/solo_CAL_stix-cal-energy_20211209T173950-20211209T174154_V02.fits 2026-03-14 23:52:07,256 Soop found: SOOP 2026-03-14 23:52:07,350 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/09/CAL/solo_CAL_stix-cal-energy_20211209T195740-20211209T195911_V02.fits 2026-03-14 23:52:07,387 Soop found: SOOP 2026-03-14 23:52:07,477 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/09/CAL/solo_CAL_stix-cal-energy_20211209T201808-20211209T224207_V02.fits 2026-03-14 23:52:07,635 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xadr1gd6 2026-03-14 23:52:07,635 Read config from in: /tmp/ecc_context_ecc_cfg_1_xadr1gd6/post_ecc.ini 2026-03-14 23:52:08,872 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xadr1gd6/solo_L1_stix-cal-energy_20211229_V03_ecc_in.fits 2026-03-15 00:01:12,710 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211229_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211229_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211229_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211229_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 00:01:18,780 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 00:01:18,787 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xadr1gd6 2026-03-15 00:01:18,811 No soops found for time: 2021-12-29 07:31:10.282169 - 2021-12-29 09:55:10.296809 2026-03-15 00:01:18,904 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/29/CAL/solo_CAL_stix-cal-energy_20211229T073110-20211229T095510_V02.fits 2026-03-15 00:01:19,063 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nbdip4as 2026-03-15 00:01:19,063 Read config from in: /tmp/ecc_context_ecc_cfg_1_nbdip4as/post_ecc.ini 2026-03-15 00:01:20,300 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nbdip4as/solo_L1_stix-cal-energy_20211202_V03_ecc_in.fits 2026-03-15 00:10:16,422 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211202_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211202_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 00:10:22,378 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 00:10:22,387 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nbdip4as 2026-03-15 00:10:22,419 No soops found for time: 2021-12-02 06:04:23.330709 - 2021-12-02 07:53:14.341650 2026-03-15 00:10:22,518 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/02/CAL/solo_CAL_stix-cal-energy_20211202T060423-20211202T075314_V02.fits 2026-03-15 00:10:22,683 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6u8wfm8t 2026-03-15 00:10:22,683 Read config from in: /tmp/ecc_context_ecc_cfg_1_6u8wfm8t/post_ecc.ini 2026-03-15 00:10:23,918 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6u8wfm8t/solo_L1_stix-cal-energy_20211215_V03_ecc_in.fits 2026-03-15 00:19:22,158 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211215_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211215_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 00:19:28,190 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 00:19:28,199 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6u8wfm8t 2026-03-15 00:19:28,227 Soop found: SOOP 2026-03-15 00:19:28,321 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/15/CAL/solo_CAL_stix-cal-energy_20211215T071104-20211215T093504_V02.fits 2026-03-15 00:19:28,481 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bau5eglh 2026-03-15 00:19:28,482 Read config from in: /tmp/ecc_context_ecc_cfg_1_bau5eglh/post_ecc.ini 2026-03-15 00:19:29,720 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bau5eglh/solo_L1_stix-cal-energy_20211204_V03_ecc_in.fits 2026-03-15 00:28:18,156 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211204_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211204_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 00:28:24,159 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 00:28:24,165 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bau5eglh 2026-03-15 00:28:24,192 Soop found: SOOP 2026-03-15 00:28:24,286 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/12/04/CAL/solo_CAL_stix-cal-energy_20211204T142605-20211204T165004_V02.fits 2026-03-15 00:28:24,443 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gi9zeiro 2026-03-15 00:28:24,444 Read config from in: /tmp/ecc_context_ecc_cfg_1_gi9zeiro/post_ecc.ini 2026-03-15 00:28:25,672 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gi9zeiro/solo_L1_stix-cal-energy_20211130_V03_ecc_in.fits 2026-03-15 00:37:13,131 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211130_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211130_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 00:37:19,066 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 00:37:19,072 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gi9zeiro 2026-03-15 00:37:19,099 No soops found for time: 2021-11-30 06:04:15.041216 - 2021-11-30 08:28:14.055689 2026-03-15 00:37:19,193 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/30/CAL/solo_CAL_stix-cal-energy_20211130T060415-20211130T082814_V02.fits 2026-03-15 00:37:19,352 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0olgpwyd 2026-03-15 00:37:19,353 Read config from in: /tmp/ecc_context_ecc_cfg_1_0olgpwyd/post_ecc.ini 2026-03-15 00:37:22,142 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0olgpwyd/solo_L1_stix-cal-energy_20211110_V03_ecc_in.fits 2026-03-15 00:46:36,129 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211110_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211110_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 00:46:42,039 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 00:46:42,046 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0olgpwyd 2026-03-15 00:46:42,071 Soop found: SOOP 2026-03-15 00:46:42,166 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/10/CAL/solo_CAL_stix-cal-energy_20211110T011310-20211110T033710_V02.fits 2026-03-15 00:46:42,353 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9w_go_ym 2026-03-15 00:46:42,354 Read config from in: /tmp/ecc_context_ecc_cfg_1_9w_go_ym/post_ecc.ini 2026-03-15 00:46:43,584 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9w_go_ym/solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits 2026-03-15 00:55:41,421 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 00:55:47,354 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 00:55:47,361 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9w_go_ym 2026-03-15 00:55:47,392 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8j3_qmn6 2026-03-15 00:55:47,392 Read config from in: /tmp/ecc_context_ecc_cfg_1_8j3_qmn6/post_ecc.ini 2026-03-15 00:55:48,633 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8j3_qmn6/solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits 2026-03-15 01:04:46,602 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 01:04:53,237 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 01:04:53,246 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8j3_qmn6 2026-03-15 01:04:53,274 Soop found: SOOP 2026-03-15 01:04:53,376 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/01/CAL/solo_CAL_stix-cal-energy_20211101T010100-20211101T023100_V02.fits 2026-03-15 01:04:53,416 Soop found: SOOP 2026-03-15 01:04:53,515 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/01/CAL/solo_CAL_stix-cal-energy_20211101T160547-20211101T182947_V02.fits 2026-03-15 01:04:53,709 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ged92p_f 2026-03-15 01:04:53,710 Read config from in: /tmp/ecc_context_ecc_cfg_1_ged92p_f/post_ecc.ini 2026-03-15 01:04:54,976 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ged92p_f/solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits 2026-03-15 01:13:54,642 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 01:14:00,656 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 01:14:00,663 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ged92p_f 2026-03-15 01:14:00,693 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c14aeviz 2026-03-15 01:14:00,694 Read config from in: /tmp/ecc_context_ecc_cfg_1_c14aeviz/post_ecc.ini 2026-03-15 01:14:02,007 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c14aeviz/solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits 2026-03-15 01:23:09,156 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 01:23:15,052 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 01:23:15,061 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c14aeviz 2026-03-15 01:23:15,086 No soops found for time: 2021-11-24 01:31:04.121234 - 2021-11-24 02:14:33.125662 2026-03-15 01:23:15,179 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/24/CAL/solo_CAL_stix-cal-energy_20211124T013104-20211124T021433_V02.fits 2026-03-15 01:23:15,215 No soops found for time: 2021-11-24 22:46:01.251043 - 2021-11-25 01:10:00.265702 2026-03-15 01:23:15,306 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/24/CAL/solo_CAL_stix-cal-energy_20211124T224601-20211125T011000_V02.fits 2026-03-15 01:23:15,459 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k4rq7zog 2026-03-15 01:23:15,460 Read config from in: /tmp/ecc_context_ecc_cfg_1_k4rq7zog/post_ecc.ini 2026-03-15 01:23:16,699 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k4rq7zog/solo_L1_stix-cal-energy_20211108_V03_ecc_in.fits 2026-03-15 01:32:22,182 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211108_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211108_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 01:32:29,598 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 01:32:29,605 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k4rq7zog 2026-03-15 01:32:29,628 Soop found: SOOP 2026-03-15 01:32:29,720 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/08/CAL/solo_CAL_stix-cal-energy_20211108T011300-20211108T033700_V02.fits 2026-03-15 01:32:29,873 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8zm91kf5 2026-03-15 01:32:29,873 Read config from in: /tmp/ecc_context_ecc_cfg_1_8zm91kf5/post_ecc.ini 2026-03-15 01:32:31,101 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8zm91kf5/solo_L1_stix-cal-energy_20211105_V03_ecc_in.fits 2026-03-15 01:41:36,452 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211105_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211105_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 01:41:43,082 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 01:41:43,089 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8zm91kf5 2026-03-15 01:41:43,117 No soops found for time: 2021-11-05 16:06:07.424689 - 2021-11-05 18:30:07.439350 2026-03-15 01:41:43,218 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/05/CAL/solo_CAL_stix-cal-energy_20211105T160607-20211105T183007_V02.fits 2026-03-15 01:41:43,383 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ixlf6zen 2026-03-15 01:41:43,383 Read config from in: /tmp/ecc_context_ecc_cfg_1_ixlf6zen/post_ecc.ini 2026-03-15 01:41:44,644 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ixlf6zen/solo_L1_stix-cal-energy_20211114_V03_ecc_in.fits 2026-03-15 01:50:54,940 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 01:51:00,919 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 01:51:00,926 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ixlf6zen 2026-03-15 01:51:00,952 Soop found: SOOP 2026-03-15 01:51:01,045 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/14/CAL/solo_CAL_stix-cal-energy_20211114T011328-20211114T033727_V02.fits 2026-03-15 01:51:01,206 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wbkgjnkb 2026-03-15 01:51:01,206 Read config from in: /tmp/ecc_context_ecc_cfg_1_wbkgjnkb/post_ecc.ini 2026-03-15 01:51:02,443 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wbkgjnkb/solo_L1_stix-cal-energy_20211120_V03_ecc_in.fits 2026-03-15 02:00:12,654 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211120_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211120_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 02:00:18,745 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 02:00:18,751 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wbkgjnkb 2026-03-15 02:00:18,777 Soop found: SOOP 2026-03-15 02:00:18,870 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/20/CAL/solo_CAL_stix-cal-energy_20211120T012128-20211120T031501_V02.fits 2026-03-15 02:00:19,024 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tbdv1g59 2026-03-15 02:00:19,025 Read config from in: /tmp/ecc_context_ecc_cfg_1_tbdv1g59/post_ecc.ini 2026-03-15 02:00:20,280 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tbdv1g59/solo_L1_stix-cal-energy_20211106_V03_ecc_in.fits 2026-03-15 02:09:38,477 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211106_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211106_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 02:09:44,423 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 02:09:44,430 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tbdv1g59 2026-03-15 02:09:44,456 Soop found: SOOP 2026-03-15 02:09:44,551 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/06/CAL/solo_CAL_stix-cal-energy_20211106T160612-20211106T183011_V02.fits 2026-03-15 02:09:44,710 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gega7mkt 2026-03-15 02:09:44,710 Read config from in: /tmp/ecc_context_ecc_cfg_1_gega7mkt/post_ecc.ini 2026-03-15 02:09:45,946 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gega7mkt/solo_L1_stix-cal-energy_20211103_V03_ecc_in.fits 2026-03-15 02:18:53,478 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211103_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211103_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 02:18:59,723 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 02:18:59,736 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gega7mkt 2026-03-15 02:18:59,826 Soop found: SOOP 2026-03-15 02:18:59,937 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/03/CAL/solo_CAL_stix-cal-energy_20211103T160558-20211103T182957_V02.fits 2026-03-15 02:19:00,126 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k8ih9qo3 2026-03-15 02:19:00,126 Read config from in: /tmp/ecc_context_ecc_cfg_1_k8ih9qo3/post_ecc.ini 2026-03-15 02:19:02,993 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k8ih9qo3/solo_L1_stix-cal-energy_20211117_V03_ecc_in.fits 2026-03-15 02:28:09,386 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211117_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211117_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 02:28:15,609 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 02:28:15,619 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k8ih9qo3 2026-03-15 02:28:15,652 Soop found: SOOP 2026-03-15 02:28:15,750 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/17/CAL/solo_CAL_stix-cal-energy_20211117T012111-20211117T034510_V02.fits 2026-03-15 02:28:15,926 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9shvv0m6 2026-03-15 02:28:15,926 Read config from in: /tmp/ecc_context_ecc_cfg_1_9shvv0m6/post_ecc.ini 2026-03-15 02:28:17,163 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9shvv0m6/solo_L1_stix-cal-energy_20211118_V03_ecc_in.fits 2026-03-15 02:37:34,749 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211118_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211118_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 02:37:40,756 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 02:37:40,763 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9shvv0m6 2026-03-15 02:37:40,791 Soop found: SOOP 2026-03-15 02:37:40,884 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/18/CAL/solo_CAL_stix-cal-energy_20211118T012116-20211118T034516_V02.fits 2026-03-15 02:37:41,045 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mskpk9z6 2026-03-15 02:37:41,045 Read config from in: /tmp/ecc_context_ecc_cfg_1_mskpk9z6/post_ecc.ini 2026-03-15 02:37:42,292 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mskpk9z6/solo_L1_stix-cal-energy_20211123_V03_ecc_in.fits 2026-03-15 02:46:47,140 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211123_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211123_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 02:46:53,238 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 02:46:53,245 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mskpk9z6 2026-03-15 02:46:53,280 No soops found for time: 2021-11-23 01:31:00.974617 - 2021-11-23 03:54:59.989276 2026-03-15 02:46:53,381 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/23/CAL/solo_CAL_stix-cal-energy_20211123T013100-20211123T035459_V02.fits 2026-03-15 02:46:53,554 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n7jk3r_3 2026-03-15 02:46:53,555 Read config from in: /tmp/ecc_context_ecc_cfg_1_n7jk3r_3/post_ecc.ini 2026-03-15 02:46:54,803 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n7jk3r_3/solo_L1_stix-cal-energy_20211116_V03_ecc_in.fits 2026-03-15 02:55:56,056 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211116_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211116_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 02:56:02,176 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 02:56:02,184 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n7jk3r_3 2026-03-15 02:56:02,210 Soop found: SOOP 2026-03-15 02:56:02,304 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/16/CAL/solo_CAL_stix-cal-energy_20211116T012105-20211116T034504_V02.fits 2026-03-15 02:56:02,468 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_itcfw4ik 2026-03-15 02:56:02,468 Read config from in: /tmp/ecc_context_ecc_cfg_1_itcfw4ik/post_ecc.ini 2026-03-15 02:56:03,708 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_itcfw4ik/solo_L1_stix-cal-energy_20211121_V03_ecc_in.fits 2026-03-15 03:05:02,568 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211121_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211121_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 03:05:08,543 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 03:05:08,550 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_itcfw4ik 2026-03-15 03:05:08,576 No soops found for time: 2021-11-21 10:01:00.733316 - 2021-11-21 12:25:00.747977 2026-03-15 03:05:08,671 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/21/CAL/solo_CAL_stix-cal-energy_20211121T100100-20211121T122500_V02.fits 2026-03-15 03:05:08,832 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fhor1933 2026-03-15 03:05:08,833 Read config from in: /tmp/ecc_context_ecc_cfg_1_fhor1933/post_ecc.ini 2026-03-15 03:05:10,087 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fhor1933/solo_L1_stix-cal-energy_20211112_V03_ecc_in.fits 2026-03-15 03:14:11,677 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211112_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211112_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 03:14:19,160 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 03:14:19,166 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fhor1933 2026-03-15 03:14:19,191 Soop found: SOOP 2026-03-15 03:14:19,285 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/12/CAL/solo_CAL_stix-cal-energy_20211112T011319-20211112T033719_V02.fits 2026-03-15 03:14:19,443 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hrjvgujh 2026-03-15 03:14:19,444 Read config from in: /tmp/ecc_context_ecc_cfg_1_hrjvgujh/post_ecc.ini 2026-03-15 03:14:20,743 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hrjvgujh/solo_L1_stix-cal-energy_20211127_V03_ecc_in.fits 2026-03-15 03:23:15,581 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211127_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211127_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 03:23:21,638 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 03:23:21,644 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hrjvgujh 2026-03-15 03:23:21,671 No soops found for time: 2021-11-27 06:04:01.608185 - 2021-11-27 08:28:00.622766 2026-03-15 03:23:21,766 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/27/CAL/solo_CAL_stix-cal-energy_20211127T060401-20211127T082800_V02.fits 2026-03-15 03:23:21,930 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dlvjz0f0 2026-03-15 03:23:21,930 Read config from in: /tmp/ecc_context_ecc_cfg_1_dlvjz0f0/post_ecc.ini 2026-03-15 03:23:23,179 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dlvjz0f0/solo_L1_stix-cal-energy_20211111_V03_ecc_in.fits 2026-03-15 03:32:30,091 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211111_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211111_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 03:32:36,157 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 03:32:36,165 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dlvjz0f0 2026-03-15 03:32:36,190 Soop found: SOOP 2026-03-15 03:32:36,283 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/11/CAL/solo_CAL_stix-cal-energy_20211111T011315-20211111T033715_V02.fits 2026-03-15 03:32:36,440 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rqw12av8 2026-03-15 03:32:36,440 Read config from in: /tmp/ecc_context_ecc_cfg_1_rqw12av8/post_ecc.ini 2026-03-15 03:32:37,664 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rqw12av8/solo_L1_stix-cal-energy_20211126_V03_ecc_in.fits 2026-03-15 03:41:39,572 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211126_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211126_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 03:41:45,702 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-15 03:41:45,704 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-15 03:41:45,709 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rqw12av8 2026-03-15 03:41:45,736 No soops found for time: 2021-11-26 22:46:08.563841 - 2021-11-26 23:16:07.566878 2026-03-15 03:41:45,831 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/26/CAL/solo_CAL_stix-cal-energy_20211126T224608-20211126T231607_V02.fits 2026-03-15 03:41:45,992 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pjjxh0px 2026-03-15 03:41:45,992 Read config from in: /tmp/ecc_context_ecc_cfg_1_pjjxh0px/post_ecc.ini 2026-03-15 03:41:47,233 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pjjxh0px/solo_L1_stix-cal-energy_20211119_V03_ecc_in.fits 2026-03-15 03:50:56,287 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211119_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211119_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 03:51:02,997 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 03:51:03,007 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pjjxh0px 2026-03-15 03:51:03,058 Soop found: SOOP 2026-03-15 03:51:03,165 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/19/CAL/solo_CAL_stix-cal-energy_20211119T012124-20211119T034523_V02.fits 2026-03-15 03:51:03,349 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7f4u03qj 2026-03-15 03:51:03,350 Read config from in: /tmp/ecc_context_ecc_cfg_1_7f4u03qj/post_ecc.ini 2026-03-15 03:51:04,700 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7f4u03qj/solo_L1_stix-cal-energy_20211125_V03_ecc_in.fits 2026-03-15 04:00:06,068 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211125_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211125_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 04:00:12,102 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 04:00:12,109 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7f4u03qj 2026-03-15 04:00:12,136 No soops found for time: 2021-11-25 22:46:04.418007 - 2021-11-26 01:10:04.432590 2026-03-15 04:00:12,230 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/25/CAL/solo_CAL_stix-cal-energy_20211125T224604-20211126T011004_V02.fits 2026-03-15 04:00:12,390 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gpfwc1vv 2026-03-15 04:00:12,390 Read config from in: /tmp/ecc_context_ecc_cfg_1_gpfwc1vv/post_ecc.ini 2026-03-15 04:00:13,633 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gpfwc1vv/solo_L1_stix-cal-energy_20211128_V03_ecc_in.fits 2026-03-15 04:09:05,177 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211128_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211128_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 04:09:12,885 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 04:09:12,891 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gpfwc1vv 2026-03-15 04:09:12,917 No soops found for time: 2021-11-28 06:04:05.751450 - 2021-11-28 08:28:04.765833 2026-03-15 04:09:13,021 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/28/CAL/solo_CAL_stix-cal-energy_20211128T060405-20211128T082804_V02.fits 2026-03-15 04:09:13,435 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f6bhaz8n 2026-03-15 04:09:13,436 Read config from in: /tmp/ecc_context_ecc_cfg_1_f6bhaz8n/post_ecc.ini 2026-03-15 04:09:14,765 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f6bhaz8n/solo_L1_stix-cal-energy_20211109_V03_ecc_in.fits 2026-03-15 04:18:16,317 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211109_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211109_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 04:18:22,416 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 04:18:22,422 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f6bhaz8n 2026-03-15 04:18:22,449 Soop found: SOOP 2026-03-15 04:18:22,544 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/09/CAL/solo_CAL_stix-cal-energy_20211109T011305-20211109T033704_V02.fits 2026-03-15 04:18:22,707 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jofre05s 2026-03-15 04:18:22,707 Read config from in: /tmp/ecc_context_ecc_cfg_1_jofre05s/post_ecc.ini 2026-03-15 04:18:23,958 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jofre05s/solo_L1_stix-cal-energy_20211129_V03_ecc_in.fits 2026-03-15 04:27:18,870 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211129_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211129_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 04:27:25,672 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 04:27:25,681 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jofre05s 2026-03-15 04:27:25,716 No soops found for time: 2021-11-29 06:04:09.896468 - 2021-11-29 08:28:09.910942 2026-03-15 04:27:25,821 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/29/CAL/solo_CAL_stix-cal-energy_20211129T060409-20211129T082809_V02.fits 2026-03-15 04:27:25,993 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wa201wja 2026-03-15 04:27:25,993 Read config from in: /tmp/ecc_context_ecc_cfg_1_wa201wja/post_ecc.ini 2026-03-15 04:27:27,260 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wa201wja/solo_L1_stix-cal-energy_20211102_V03_ecc_in.fits 2026-03-15 04:36:29,354 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211102_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211102_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 04:36:35,472 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 04:36:35,478 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wa201wja 2026-03-15 04:36:35,507 Soop found: SOOP 2026-03-15 04:36:35,602 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/02/CAL/solo_CAL_stix-cal-energy_20211102T160552-20211102T182951_V02.fits 2026-03-15 04:36:35,767 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ft5moxi4 2026-03-15 04:36:35,767 Read config from in: /tmp/ecc_context_ecc_cfg_1_ft5moxi4/post_ecc.ini 2026-03-15 04:36:37,015 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ft5moxi4/solo_L1_stix-cal-energy_20211113_V03_ecc_in.fits 2026-03-15 04:45:37,686 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211113_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211113_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 04:45:43,805 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 04:45:43,814 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ft5moxi4 2026-03-15 04:45:43,847 Soop found: SOOP 2026-03-15 04:45:43,941 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/13/CAL/solo_CAL_stix-cal-energy_20211113T011323-20211113T033723_V02.fits 2026-03-15 04:45:44,104 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4lqc6b5r 2026-03-15 04:45:44,105 Read config from in: /tmp/ecc_context_ecc_cfg_1_4lqc6b5r/post_ecc.ini 2026-03-15 04:45:45,399 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4lqc6b5r/solo_L1_stix-cal-energy_20211115_V03_ecc_in.fits 2026-03-15 04:54:53,153 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211115_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211115_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 04:54:59,180 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 04:54:59,186 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4lqc6b5r 2026-03-15 04:54:59,214 Soop found: SOOP 2026-03-15 04:54:59,308 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/15/CAL/solo_CAL_stix-cal-energy_20211115T012100-20211115T034500_V02.fits 2026-03-15 04:54:59,469 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7r0tac7e 2026-03-15 04:54:59,469 Read config from in: /tmp/ecc_context_ecc_cfg_1_7r0tac7e/post_ecc.ini 2026-03-15 04:55:00,709 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7r0tac7e/solo_L1_stix-cal-energy_20211104_V03_ecc_in.fits 2026-03-15 05:03:57,029 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20211104_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20211104_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20211104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20211104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 05:04:05,116 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 05:04:05,126 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7r0tac7e 2026-03-15 05:04:05,153 Soop found: SOOP 2026-03-15 05:04:05,252 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/11/04/CAL/solo_CAL_stix-cal-energy_20211104T160602-20211104T183002_V02.fits 2026-03-15 05:04:05,415 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_seobxxy8 2026-03-15 05:04:05,415 Read config from in: /tmp/ecc_context_ecc_cfg_1_seobxxy8/post_ecc.ini 2026-03-15 05:04:06,671 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_seobxxy8/solo_L1_stix-cal-energy_20210930_V03_ecc_in.fits 2026-03-15 05:13:16,436 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210930_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210930_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210930_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210930_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 05:13:22,446 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 05:13:22,452 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_seobxxy8 2026-03-15 05:13:22,481 Soop found: SOOP 2026-03-15 05:13:22,575 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/30/CAL/solo_CAL_stix-cal-energy_20210930T000816-20210930T023216_V02.fits 2026-03-15 05:13:22,732 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fjvw0zej 2026-03-15 05:13:22,732 Read config from in: /tmp/ecc_context_ecc_cfg_1_fjvw0zej/post_ecc.ini 2026-03-15 05:13:23,974 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fjvw0zej/solo_L1_stix-cal-energy_20210910_V03_ecc_in.fits 2026-03-15 05:22:33,807 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210910_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210910_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210910_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210910_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 05:22:39,825 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 05:22:39,832 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fjvw0zej 2026-03-15 05:22:39,859 Soop found: SOOP 2026-03-15 05:22:39,953 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/10/CAL/solo_CAL_stix-cal-energy_20210910T130831-20210910T153231_V02.fits 2026-03-15 05:22:40,117 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mkr1tf32 2026-03-15 05:22:40,118 Read config from in: /tmp/ecc_context_ecc_cfg_1_mkr1tf32/post_ecc.ini 2026-03-15 05:22:41,368 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mkr1tf32/solo_L1_stix-cal-energy_20210901_V03_ecc_in.fits 2026-03-15 05:31:50,293 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210901_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210901_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210901_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210901_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 05:31:56,469 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 05:31:56,479 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mkr1tf32 2026-03-15 05:31:56,535 Soop found: SOOP 2026-03-15 05:31:56,645 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/01/CAL/solo_CAL_stix-cal-energy_20210901T125612-20210901T152012_V02.fits 2026-03-15 05:31:56,823 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d_bc8dik 2026-03-15 05:31:56,824 Read config from in: /tmp/ecc_context_ecc_cfg_1_d_bc8dik/post_ecc.ini 2026-03-15 05:31:58,072 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d_bc8dik/solo_L1_stix-cal-energy_20210924_V03_ecc_in.fits 2026-03-15 05:40:57,268 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210924_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210924_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210924_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210924_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 05:41:03,382 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 05:41:03,389 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d_bc8dik 2026-03-15 05:41:03,422 Soop found: SOOP 2026-03-15 05:41:03,422 Soop found: SOOP 2026-03-15 05:41:03,519 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/24/CAL/solo_CAL_stix-cal-energy_20210924T184331-20210924T210730_V02.fits 2026-03-15 05:41:03,693 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2mmh68zn 2026-03-15 05:41:03,693 Read config from in: /tmp/ecc_context_ecc_cfg_1_2mmh68zn/post_ecc.ini 2026-03-15 05:41:05,034 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2mmh68zn/solo_L1_stix-cal-energy_20210908_V03_ecc_in.fits 2026-03-15 05:50:12,806 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210908_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210908_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210908_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210908_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 05:50:18,800 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 05:50:18,807 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2mmh68zn 2026-03-15 05:50:18,835 Soop found: SOOP 2026-03-15 05:50:18,930 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/08/CAL/solo_CAL_stix-cal-energy_20210908T130820-20210908T153220_V02.fits 2026-03-15 05:50:19,091 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bya69ap9 2026-03-15 05:50:19,092 Read config from in: /tmp/ecc_context_ecc_cfg_1_bya69ap9/post_ecc.ini 2026-03-15 05:50:21,830 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bya69ap9/solo_L1_stix-cal-energy_20210905_V03_ecc_in.fits 2026-03-15 05:59:33,280 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210905_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210905_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210905_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210905_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 05:59:39,235 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 05:59:39,245 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bya69ap9 2026-03-15 05:59:39,296 Soop found: SOOP 2026-03-15 05:59:39,397 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/05/CAL/solo_CAL_stix-cal-energy_20210905T125632-20210905T152031_V02.fits 2026-03-15 05:59:39,567 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6zpanr_a 2026-03-15 05:59:39,568 Read config from in: /tmp/ecc_context_ecc_cfg_1_6zpanr_a/post_ecc.ini 2026-03-15 05:59:40,801 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6zpanr_a/solo_L1_stix-cal-energy_20210914_V03_ecc_in.fits 2026-03-15 06:08:54,639 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210914_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210914_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210914_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210914_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 06:09:00,630 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 06:09:00,637 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6zpanr_a 2026-03-15 06:09:00,668 Soop found: SOOP 2026-03-15 06:09:00,764 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/14/CAL/solo_CAL_stix-cal-energy_20210914T130849-20210914T153249_V02.fits 2026-03-15 06:09:00,932 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xghxp1fl 2026-03-15 06:09:00,933 Read config from in: /tmp/ecc_context_ecc_cfg_1_xghxp1fl/post_ecc.ini 2026-03-15 06:09:02,177 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xghxp1fl/solo_L1_stix-cal-energy_20210907_V03_ecc_in.fits 2026-03-15 06:18:16,830 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210907_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210907_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210907_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210907_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 06:18:23,476 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 06:18:23,485 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xghxp1fl 2026-03-15 06:18:23,520 Soop found: SOOP 2026-03-15 06:18:23,621 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/07/CAL/solo_CAL_stix-cal-energy_20210907T130815-20210907T153215_V02.fits 2026-03-15 06:18:23,787 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rb6zwisa 2026-03-15 06:18:23,788 Read config from in: /tmp/ecc_context_ecc_cfg_1_rb6zwisa/post_ecc.ini 2026-03-15 06:18:25,055 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rb6zwisa/solo_L1_stix-cal-energy_20210920_V03_ecc_in.fits 2026-03-15 06:27:23,878 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210920_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210920_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210920_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210920_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 06:27:29,830 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 06:27:29,836 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rb6zwisa 2026-03-15 06:27:29,866 Soop found: SOOP 2026-03-15 06:27:29,866 Soop found: SOOP 2026-03-15 06:27:29,963 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/20/CAL/solo_CAL_stix-cal-energy_20210920T184312-20210920T210711_V02.fits 2026-03-15 06:27:30,130 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_clttrjbi 2026-03-15 06:27:30,131 Read config from in: /tmp/ecc_context_ecc_cfg_1_clttrjbi/post_ecc.ini 2026-03-15 06:27:31,377 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_clttrjbi/solo_L1_stix-cal-energy_20210906_V03_ecc_in.fits 2026-03-15 06:36:37,754 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210906_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210906_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210906_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210906_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 06:36:43,829 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 06:36:43,836 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_clttrjbi 2026-03-15 06:36:43,866 Soop found: SOOP 2026-03-15 06:36:43,960 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/06/CAL/solo_CAL_stix-cal-energy_20210906T130811-20210906T153210_V02.fits 2026-03-15 06:36:44,121 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1rhvyzif 2026-03-15 06:36:44,122 Read config from in: /tmp/ecc_context_ecc_cfg_1_1rhvyzif/post_ecc.ini 2026-03-15 06:36:45,374 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1rhvyzif/solo_L1_stix-cal-energy_20210903_V03_ecc_in.fits 2026-03-15 06:45:52,558 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210903_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210903_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210903_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210903_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 06:46:00,779 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 06:46:00,785 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1rhvyzif 2026-03-15 06:46:00,813 Soop found: SOOP 2026-03-15 06:46:00,912 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/03/CAL/solo_CAL_stix-cal-energy_20210903T125623-20210903T152023_V02.fits 2026-03-15 06:46:01,076 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_grzqb3te 2026-03-15 06:46:01,077 Read config from in: /tmp/ecc_context_ecc_cfg_1_grzqb3te/post_ecc.ini 2026-03-15 06:46:02,327 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_grzqb3te/solo_L1_stix-cal-energy_20210923_V03_ecc_in.fits 2026-03-15 06:55:12,733 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210923_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210923_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210923_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210923_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 06:55:18,685 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 06:55:18,691 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_grzqb3te 2026-03-15 06:55:18,723 Soop found: SOOP 2026-03-15 06:55:18,723 Soop found: SOOP 2026-03-15 06:55:18,819 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/23/CAL/solo_CAL_stix-cal-energy_20210923T184325-20210923T210725_V02.fits 2026-03-15 06:55:18,978 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sxjhahau 2026-03-15 06:55:18,978 Read config from in: /tmp/ecc_context_ecc_cfg_1_sxjhahau/post_ecc.ini 2026-03-15 06:55:20,219 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sxjhahau/solo_L1_stix-cal-energy_20210921_V03_ecc_in.fits 2026-03-15 07:04:10,092 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210921_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210921_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210921_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210921_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 07:04:16,019 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 07:04:16,027 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sxjhahau 2026-03-15 07:04:16,057 Soop found: SOOP 2026-03-15 07:04:16,057 Soop found: SOOP 2026-03-15 07:04:16,151 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/21/CAL/solo_CAL_stix-cal-energy_20210921T184316-20210921T210715_V02.fits 2026-03-15 07:04:16,314 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nls9km8k 2026-03-15 07:04:16,315 Read config from in: /tmp/ecc_context_ecc_cfg_1_nls9km8k/post_ecc.ini 2026-03-15 07:04:17,543 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nls9km8k/solo_L1_stix-cal-energy_20210912_V03_ecc_in.fits 2026-03-15 07:13:19,767 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210912_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210912_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210912_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210912_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 07:13:25,801 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 07:13:25,808 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nls9km8k 2026-03-15 07:13:25,834 No soops found for time: 2021-09-12 13:08:41.474546 - 2021-09-12 15:32:40.489477 2026-03-15 07:13:25,929 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/12/CAL/solo_CAL_stix-cal-energy_20210912T130841-20210912T153240_V02.fits 2026-03-15 07:13:26,087 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fw0_ntdo 2026-03-15 07:13:26,088 Read config from in: /tmp/ecc_context_ecc_cfg_1_fw0_ntdo/post_ecc.ini 2026-03-15 07:13:27,330 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fw0_ntdo/solo_L1_stix-cal-energy_20210927_V03_ecc_in.fits 2026-03-15 07:22:24,879 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210927_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210927_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210927_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210927_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 07:22:30,869 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 07:22:30,876 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fw0_ntdo 2026-03-15 07:22:30,916 Soop found: SOOP 2026-03-15 07:22:31,014 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/27/CAL/solo_CAL_stix-cal-energy_20210927T000800-20210927T023200_V02.fits 2026-03-15 07:22:31,187 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lba_ym0z 2026-03-15 07:22:31,188 Read config from in: /tmp/ecc_context_ecc_cfg_1_lba_ym0z/post_ecc.ini 2026-03-15 07:22:32,428 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lba_ym0z/solo_L1_stix-cal-energy_20210911_V03_ecc_in.fits 2026-03-15 07:31:36,214 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210911_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210911_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210911_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210911_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 07:31:42,177 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 07:31:42,186 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lba_ym0z 2026-03-15 07:31:42,215 Soop found: SOOP 2026-03-15 07:31:42,308 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/11/CAL/solo_CAL_stix-cal-energy_20210911T130836-20210911T153235_V02.fits 2026-03-15 07:31:42,466 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__ma_e7l4 2026-03-15 07:31:42,466 Read config from in: /tmp/ecc_context_ecc_cfg_1__ma_e7l4/post_ecc.ini 2026-03-15 07:31:43,707 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__ma_e7l4/solo_L1_stix-cal-energy_20210926_V03_ecc_in.fits 2026-03-15 07:40:42,000 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210926_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210926_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210926_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210926_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 07:40:49,568 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 07:40:49,574 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__ma_e7l4 2026-03-15 07:40:49,599 Soop found: SOOP 2026-03-15 07:40:49,599 Soop found: SOOP 2026-03-15 07:40:49,695 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/26/CAL/solo_CAL_stix-cal-energy_20210926T184340-20210926T191518_V02.fits 2026-03-15 07:40:49,859 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_quxw7bgz 2026-03-15 07:40:49,859 Read config from in: /tmp/ecc_context_ecc_cfg_1_quxw7bgz/post_ecc.ini 2026-03-15 07:40:51,086 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_quxw7bgz/solo_L1_stix-cal-energy_20210922_V03_ecc_in.fits 2026-03-15 07:49:43,458 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210922_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210922_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210922_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210922_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 07:49:49,932 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 07:49:49,939 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_quxw7bgz 2026-03-15 07:49:49,968 Soop found: SOOP 2026-03-15 07:49:49,968 Soop found: SOOP 2026-03-15 07:49:50,064 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/22/CAL/solo_CAL_stix-cal-energy_20210922T184319-20210922T210719_V02.fits 2026-03-15 07:49:50,221 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dp41cqqp 2026-03-15 07:49:50,221 Read config from in: /tmp/ecc_context_ecc_cfg_1_dp41cqqp/post_ecc.ini 2026-03-15 07:49:51,450 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dp41cqqp/solo_L1_stix-cal-energy_20210925_V03_ecc_in.fits 2026-03-15 07:58:51,383 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210925_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210925_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210925_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210925_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 07:58:57,329 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 07:58:57,336 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dp41cqqp 2026-03-15 07:58:57,364 Soop found: SOOP 2026-03-15 07:58:57,364 Soop found: SOOP 2026-03-15 07:58:57,459 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/25/CAL/solo_CAL_stix-cal-energy_20210925T184335-20210925T210735_V02.fits 2026-03-15 07:58:57,618 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zul0yhns 2026-03-15 07:58:57,618 Read config from in: /tmp/ecc_context_ecc_cfg_1_zul0yhns/post_ecc.ini 2026-03-15 07:58:58,862 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zul0yhns/solo_L1_stix-cal-energy_20210928_V03_ecc_in.fits 2026-03-15 08:07:56,167 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210928_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210928_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210928_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210928_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 08:08:02,609 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 08:08:02,617 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zul0yhns 2026-03-15 08:08:02,663 Soop found: SOOP 2026-03-15 08:08:02,760 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/28/CAL/solo_CAL_stix-cal-energy_20210928T000805-20210928T023205_V02.fits 2026-03-15 08:08:02,940 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ki2vfuhd 2026-03-15 08:08:02,941 Read config from in: /tmp/ecc_context_ecc_cfg_1_ki2vfuhd/post_ecc.ini 2026-03-15 08:08:04,177 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ki2vfuhd/solo_L1_stix-cal-energy_20210909_V03_ecc_in.fits 2026-03-15 08:17:17,604 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210909_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210909_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210909_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210909_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 08:17:23,680 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 08:17:23,687 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ki2vfuhd 2026-03-15 08:17:23,712 Soop found: SOOP 2026-03-15 08:17:23,806 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/09/CAL/solo_CAL_stix-cal-energy_20210909T130826-20210909T153226_V02.fits 2026-03-15 08:17:23,964 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l40amfse 2026-03-15 08:17:23,964 Read config from in: /tmp/ecc_context_ecc_cfg_1_l40amfse/post_ecc.ini 2026-03-15 08:17:25,201 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l40amfse/solo_L1_stix-cal-energy_20210929_V03_ecc_in.fits 2026-03-15 08:26:21,147 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210929_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210929_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210929_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210929_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 08:26:27,146 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 08:26:27,154 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l40amfse 2026-03-15 08:26:27,184 Soop found: SOOP 2026-03-15 08:26:27,278 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/29/CAL/solo_CAL_stix-cal-energy_20210929T000810-20210929T023209_V02.fits 2026-03-15 08:26:27,602 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_235nmzdw 2026-03-15 08:26:27,602 Read config from in: /tmp/ecc_context_ecc_cfg_1_235nmzdw/post_ecc.ini 2026-03-15 08:26:28,848 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_235nmzdw/solo_L1_stix-cal-energy_20210902_V03_ecc_in.fits 2026-03-15 08:35:29,461 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210902_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210902_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210902_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210902_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 08:35:36,853 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 08:35:36,860 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_235nmzdw 2026-03-15 08:35:36,883 Soop found: SOOP 2026-03-15 08:35:36,975 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/02/CAL/solo_CAL_stix-cal-energy_20210902T125617-20210902T152017_V02.fits 2026-03-15 08:35:37,136 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_my9jd193 2026-03-15 08:35:37,136 Read config from in: /tmp/ecc_context_ecc_cfg_1_my9jd193/post_ecc.ini 2026-03-15 08:35:38,363 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_my9jd193/solo_L1_stix-cal-energy_20210913_V03_ecc_in.fits 2026-03-15 08:44:37,089 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210913_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210913_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210913_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210913_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 08:44:43,047 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 08:44:43,053 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_my9jd193 2026-03-15 08:44:43,077 Soop found: SOOP 2026-03-15 08:44:43,170 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/13/CAL/solo_CAL_stix-cal-energy_20210913T130845-20210913T153245_V02.fits 2026-03-15 08:44:43,326 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_17l2c7oq 2026-03-15 08:44:43,326 Read config from in: /tmp/ecc_context_ecc_cfg_1_17l2c7oq/post_ecc.ini 2026-03-15 08:44:44,577 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_17l2c7oq/solo_L1_stix-cal-energy_20210904_V03_ecc_in.fits 2026-03-15 08:53:52,250 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210904_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210904_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210904_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210904_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 08:53:58,177 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 08:53:58,184 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_17l2c7oq 2026-03-15 08:53:58,211 Soop found: SOOP 2026-03-15 08:53:58,304 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/09/04/CAL/solo_CAL_stix-cal-energy_20210904T125627-20210904T152027_V02.fits 2026-03-15 08:53:58,467 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rvrr2nmd 2026-03-15 08:53:58,468 Read config from in: /tmp/ecc_context_ecc_cfg_1_rvrr2nmd/post_ecc.ini 2026-03-15 08:53:59,697 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rvrr2nmd/solo_L1_stix-cal-energy_20210210_V03_ecc_in.fits 2026-03-15 09:02:56,036 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210210_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210210_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 09:03:01,955 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 09:03:01,963 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rvrr2nmd 2026-03-15 09:03:01,991 No soops found for time: 2021-02-10 00:21:10.275071 - 2021-02-10 02:45:10.289734 2026-03-15 09:03:02,086 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/10/CAL/solo_CAL_stix-cal-energy_20210210T002110-20210210T024510_V02.fits 2026-03-15 09:03:02,246 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_106xbd7z 2026-03-15 09:03:02,247 Read config from in: /tmp/ecc_context_ecc_cfg_1_106xbd7z/post_ecc.ini 2026-03-15 09:03:03,483 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_106xbd7z/solo_L1_stix-cal-energy_20210201_V03_ecc_in.fits 2026-03-15 09:11:48,020 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210201_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210201_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 09:11:53,995 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 09:11:54,001 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_106xbd7z 2026-03-15 09:11:54,028 No soops found for time: 2021-02-01 00:11:00.947515 - 2021-02-01 02:35:00.961997 2026-03-15 09:11:54,123 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/01/CAL/solo_CAL_stix-cal-energy_20210201T001100-20210201T023500_V02.fits 2026-03-15 09:11:54,280 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o9c16aul 2026-03-15 09:11:54,280 Read config from in: /tmp/ecc_context_ecc_cfg_1_o9c16aul/post_ecc.ini 2026-03-15 09:11:55,515 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o9c16aul/solo_L1_stix-cal-energy_20210224_V03_ecc_in.fits 2026-03-15 09:20:58,203 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210224_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210224_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 09:21:04,171 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 09:21:04,178 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o9c16aul 2026-03-15 09:21:04,213 No soops found for time: 2021-02-24 00:51:00.330931 - 2021-02-24 03:15:00.345594 2026-03-15 09:21:04,310 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/24/CAL/solo_CAL_stix-cal-energy_20210224T005100-20210224T031500_V02.fits 2026-03-15 09:21:04,468 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s9zvz4zp 2026-03-15 09:21:04,468 Read config from in: /tmp/ecc_context_ecc_cfg_1_s9zvz4zp/post_ecc.ini 2026-03-15 09:21:05,711 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s9zvz4zp/solo_L1_stix-cal-energy_20210208_V03_ecc_in.fits 2026-03-15 09:30:02,528 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210208_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210208_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 09:30:09,821 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 09:30:09,828 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s9zvz4zp 2026-03-15 09:30:09,852 No soops found for time: 2021-02-08 00:21:00.981795 - 2021-02-08 02:45:00.996458 2026-03-15 09:30:09,943 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/08/CAL/solo_CAL_stix-cal-energy_20210208T002100-20210208T024500_V02.fits 2026-03-15 09:30:10,099 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gkq_8e_0 2026-03-15 09:30:10,099 Read config from in: /tmp/ecc_context_ecc_cfg_1_gkq_8e_0/post_ecc.ini 2026-03-15 09:30:11,320 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gkq_8e_0/solo_L1_stix-cal-energy_20210205_V03_ecc_in.fits 2026-03-15 09:39:08,728 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 09:39:14,705 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 09:39:14,711 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gkq_8e_0 2026-03-15 09:39:14,738 No soops found for time: 2021-02-05 00:11:20.540427 - 2021-02-05 02:35:19.555088 2026-03-15 09:39:14,831 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/05/CAL/solo_CAL_stix-cal-energy_20210205T001120-20210205T023519_V02.fits 2026-03-15 09:39:14,990 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__betoppe 2026-03-15 09:39:14,992 Read config from in: /tmp/ecc_context_ecc_cfg_1__betoppe/post_ecc.ini 2026-03-15 09:39:16,217 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__betoppe/solo_L1_stix-cal-energy_20210214_V03_ecc_in.fits 2026-03-15 09:48:15,334 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210214_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210214_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 09:48:21,304 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 09:48:21,311 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__betoppe 2026-03-15 09:48:21,335 No soops found for time: 2021-02-14 00:21:29.861625 - 2021-02-14 02:45:29.876288 2026-03-15 09:48:21,430 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/14/CAL/solo_CAL_stix-cal-energy_20210214T002129-20210214T024529_V02.fits 2026-03-15 09:48:21,599 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lnfwex1q 2026-03-15 09:48:21,600 Read config from in: /tmp/ecc_context_ecc_cfg_1_lnfwex1q/post_ecc.ini 2026-03-15 09:48:22,838 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lnfwex1q/solo_L1_stix-cal-energy_20210207_V03_ecc_in.fits 2026-03-15 09:57:36,333 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210207_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210207_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 09:57:42,267 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 09:57:42,277 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lnfwex1q 2026-03-15 09:57:42,305 No soops found for time: 2021-02-07 00:11:29.834195 - 2021-02-07 02:35:29.848858 2026-03-15 09:57:42,399 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/07/CAL/solo_CAL_stix-cal-energy_20210207T001129-20210207T023529_V02.fits 2026-03-15 09:57:42,561 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tcxkdzsz 2026-03-15 09:57:42,562 Read config from in: /tmp/ecc_context_ecc_cfg_1_tcxkdzsz/post_ecc.ini 2026-03-15 09:57:43,797 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tcxkdzsz/solo_L1_stix-cal-energy_20210220_V03_ecc_in.fits 2026-03-15 10:06:47,273 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 10:06:53,257 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 10:06:53,263 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tcxkdzsz 2026-03-15 10:06:53,289 No soops found for time: 2021-02-20 00:31:24.742415 - 2021-02-20 02:55:24.757078 2026-03-15 10:06:53,382 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/20/CAL/solo_CAL_stix-cal-energy_20210220T003124-20210220T025524_V02.fits 2026-03-15 10:06:53,542 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5nvhm6zs 2026-03-15 10:06:53,542 Read config from in: /tmp/ecc_context_ecc_cfg_1_5nvhm6zs/post_ecc.ini 2026-03-15 10:06:54,785 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5nvhm6zs/solo_L1_stix-cal-energy_20210206_V03_ecc_in.fits 2026-03-15 10:15:53,694 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 10:15:59,697 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 10:15:59,704 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5nvhm6zs 2026-03-15 10:15:59,729 No soops found for time: 2021-02-06 00:11:24.687557 - 2021-02-06 02:35:24.702219 2026-03-15 10:15:59,821 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/06/CAL/solo_CAL_stix-cal-energy_20210206T001124-20210206T023524_V02.fits 2026-03-15 10:15:59,978 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pl0_al5i 2026-03-15 10:15:59,979 Read config from in: /tmp/ecc_context_ecc_cfg_1_pl0_al5i/post_ecc.ini 2026-03-15 10:16:01,223 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pl0_al5i/solo_L1_stix-cal-energy_20210203_V03_ecc_in.fits 2026-03-15 10:25:03,109 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210203_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210203_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 10:25:10,433 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 10:25:10,441 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pl0_al5i 2026-03-15 10:25:10,467 No soops found for time: 2021-02-03 00:11:11.237172 - 2021-02-03 02:35:11.251654 2026-03-15 10:25:10,558 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/03/CAL/solo_CAL_stix-cal-energy_20210203T001111-20210203T023511_V02.fits 2026-03-15 10:25:10,715 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3w_31stj 2026-03-15 10:25:10,716 Read config from in: /tmp/ecc_context_ecc_cfg_1_3w_31stj/post_ecc.ini 2026-03-15 10:25:11,949 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3w_31stj/solo_L1_stix-cal-energy_20210217_V03_ecc_in.fits 2026-03-15 10:34:05,599 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210217_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210217_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 10:34:11,524 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 10:34:11,532 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3w_31stj 2026-03-15 10:34:11,561 No soops found for time: 2021-02-17 00:31:10.302500 - 2021-02-17 02:55:10.317163 2026-03-15 10:34:11,654 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/17/CAL/solo_CAL_stix-cal-energy_20210217T003110-20210217T025510_V02.fits 2026-03-15 10:34:11,819 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7j40gc_q 2026-03-15 10:34:11,819 Read config from in: /tmp/ecc_context_ecc_cfg_1_7j40gc_q/post_ecc.ini 2026-03-15 10:34:13,048 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7j40gc_q/solo_L1_stix-cal-energy_20210218_V03_ecc_in.fits 2026-03-15 10:43:09,074 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210218_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210218_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 10:43:15,037 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 10:43:15,044 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7j40gc_q 2026-03-15 10:43:15,072 No soops found for time: 2021-02-18 00:31:15.449139 - 2021-02-18 02:55:15.463802 2026-03-15 10:43:15,170 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/18/CAL/solo_CAL_stix-cal-energy_20210218T003115-20210218T025515_V02.fits 2026-03-15 10:43:15,330 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_502uymgg 2026-03-15 10:43:15,330 Read config from in: /tmp/ecc_context_ecc_cfg_1_502uymgg/post_ecc.ini 2026-03-15 10:43:16,567 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_502uymgg/solo_L1_stix-cal-energy_20210223_V03_ecc_in.fits 2026-03-15 10:52:23,377 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210223_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210223_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 10:52:30,009 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 10:52:30,017 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_502uymgg 2026-03-15 10:52:30,045 Soop found: SOOP 2026-03-15 10:52:30,145 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/23/CAL/solo_CAL_stix-cal-energy_20210223T004501-20210223T030905_V02.fits 2026-03-15 10:52:30,312 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6p6h6j0x 2026-03-15 10:52:30,313 Read config from in: /tmp/ecc_context_ecc_cfg_1_6p6h6j0x/post_ecc.ini 2026-03-15 10:52:31,581 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6p6h6j0x/solo_L1_stix-cal-energy_20210216_V03_ecc_in.fits 2026-03-15 11:01:23,384 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210216_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210216_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 11:01:29,319 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 11:01:29,326 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6p6h6j0x 2026-03-15 11:01:29,354 No soops found for time: 2021-02-16 00:31:06.155863 - 2021-02-16 02:55:05.170524 2026-03-15 11:01:29,448 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/16/CAL/solo_CAL_stix-cal-energy_20210216T003106-20210216T025505_V02.fits 2026-03-15 11:01:29,608 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ohq2fgl2 2026-03-15 11:01:29,609 Read config from in: /tmp/ecc_context_ecc_cfg_1_ohq2fgl2/post_ecc.ini 2026-03-15 11:01:30,843 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ohq2fgl2/solo_L1_stix-cal-energy_20210221_V03_ecc_in.fits 2026-03-15 11:10:36,770 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210221_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210221_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 11:10:42,787 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 11:10:42,795 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ohq2fgl2 2026-03-15 11:10:42,822 No soops found for time: 2021-02-21 00:31:29.889054 - 2021-02-21 02:55:29.903717 2026-03-15 11:10:42,919 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/21/CAL/solo_CAL_stix-cal-energy_20210221T003129-20210221T025529_V02.fits 2026-03-15 11:10:43,083 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dmrnza0k 2026-03-15 11:10:43,083 Read config from in: /tmp/ecc_context_ecc_cfg_1_dmrnza0k/post_ecc.ini 2026-03-15 11:10:45,787 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dmrnza0k/solo_L1_stix-cal-energy_20210212_V03_ecc_in.fits 2026-03-15 11:19:44,711 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210212_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210212_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 11:19:50,621 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 11:19:50,629 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dmrnza0k 2026-03-15 11:19:50,656 No soops found for time: 2021-02-12 00:21:19.568347 - 2021-02-12 02:45:19.583010 2026-03-15 11:19:50,752 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/12/CAL/solo_CAL_stix-cal-energy_20210212T002119-20210212T024519_V02.fits 2026-03-15 11:19:50,912 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pka435p1 2026-03-15 11:19:50,913 Read config from in: /tmp/ecc_context_ecc_cfg_1_pka435p1/post_ecc.ini 2026-03-15 11:19:52,143 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pka435p1/solo_L1_stix-cal-energy_20210227_V03_ecc_in.fits 2026-03-15 11:28:55,776 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210227_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210227_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 11:29:01,760 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 11:29:01,766 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pka435p1 2026-03-15 11:29:01,796 No soops found for time: 2021-02-27 00:51:14.770846 - 2021-02-27 03:15:14.785509 2026-03-15 11:29:01,890 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/27/CAL/solo_CAL_stix-cal-energy_20210227T005114-20210227T031514_V02.fits 2026-03-15 11:29:02,049 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jai3g4dg 2026-03-15 11:29:02,051 Read config from in: /tmp/ecc_context_ecc_cfg_1_jai3g4dg/post_ecc.ini 2026-03-15 11:29:03,301 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jai3g4dg/solo_L1_stix-cal-energy_20210226_V03_ecc_in.fits 2026-03-15 11:37:59,045 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210226_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210226_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 11:38:04,976 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 11:38:04,983 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jai3g4dg 2026-03-15 11:38:05,008 No soops found for time: 2021-02-26 00:51:09.624207 - 2021-02-26 03:15:09.638870 2026-03-15 11:38:05,100 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/26/CAL/solo_CAL_stix-cal-energy_20210226T005109-20210226T031509_V02.fits 2026-03-15 11:38:05,253 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cupyms0h 2026-03-15 11:38:05,254 Read config from in: /tmp/ecc_context_ecc_cfg_1_cupyms0h/post_ecc.ini 2026-03-15 11:38:06,494 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cupyms0h/solo_L1_stix-cal-energy_20210219_V03_ecc_in.fits 2026-03-15 11:47:13,735 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210219_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210219_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 11:47:19,699 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 11:47:19,708 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cupyms0h 2026-03-15 11:47:19,733 No soops found for time: 2021-02-19 00:31:20.595778 - 2021-02-19 02:55:19.610439 2026-03-15 11:47:19,825 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/19/CAL/solo_CAL_stix-cal-energy_20210219T003120-20210219T025519_V02.fits 2026-03-15 11:47:19,975 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9pb6jhqf 2026-03-15 11:47:19,975 Read config from in: /tmp/ecc_context_ecc_cfg_1_9pb6jhqf/post_ecc.ini 2026-03-15 11:47:21,217 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9pb6jhqf/solo_L1_stix-cal-energy_20210222_V03_ecc_in.fits 2026-03-15 11:56:10,861 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210222_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210222_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 11:56:16,909 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 11:56:16,918 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9pb6jhqf 2026-03-15 11:56:16,959 No soops found for time: 2021-02-22 00:41:01.036654 - 2021-02-22 03:05:01.051316 2026-03-15 11:56:17,056 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/22/CAL/solo_CAL_stix-cal-energy_20210222T004101-20210222T030501_V02.fits 2026-03-15 11:56:17,219 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_09egq_y2 2026-03-15 11:56:17,220 Read config from in: /tmp/ecc_context_ecc_cfg_1_09egq_y2/post_ecc.ini 2026-03-15 11:56:18,463 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_09egq_y2/solo_L1_stix-cal-energy_20210225_V03_ecc_in.fits 2026-03-15 12:07:27,205 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210225_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210225_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 12:07:33,090 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 12:07:33,098 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_09egq_y2 2026-03-15 12:07:33,123 No soops found for time: 2021-02-25 00:51:05.477570 - 2021-02-25 03:15:04.492231 2026-03-15 12:07:33,216 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/25/CAL/solo_CAL_stix-cal-energy_20210225T005105-20210225T031504_V02.fits 2026-03-15 12:07:33,372 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l7uoew0i 2026-03-15 12:07:33,373 Read config from in: /tmp/ecc_context_ecc_cfg_1_l7uoew0i/post_ecc.ini 2026-03-15 12:07:35,955 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l7uoew0i/solo_L1_stix-cal-energy_20210209_V03_ecc_in.fits 2026-03-15 12:19:03,799 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 12:19:09,725 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 12:19:09,732 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l7uoew0i 2026-03-15 12:19:09,757 No soops found for time: 2021-02-09 00:21:06.128434 - 2021-02-09 02:45:05.143095 2026-03-15 12:19:09,849 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/09/CAL/solo_CAL_stix-cal-energy_20210209T002106-20210209T024505_V02.fits 2026-03-15 12:19:10,005 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6pyzvdl1 2026-03-15 12:19:10,006 Read config from in: /tmp/ecc_context_ecc_cfg_1_6pyzvdl1/post_ecc.ini 2026-03-15 12:19:11,232 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6pyzvdl1/solo_L1_stix-cal-energy_20210202_V03_ecc_in.fits 2026-03-15 12:28:06,928 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210202_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210202_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 12:28:12,920 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 12:28:12,927 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6pyzvdl1 2026-03-15 12:28:12,952 No soops found for time: 2021-02-02 00:11:06.092343 - 2021-02-02 02:35:05.106824 2026-03-15 12:28:13,045 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/02/CAL/solo_CAL_stix-cal-energy_20210202T001106-20210202T023505_V02.fits 2026-03-15 12:28:13,204 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tekcfdbi 2026-03-15 12:28:13,205 Read config from in: /tmp/ecc_context_ecc_cfg_1_tekcfdbi/post_ecc.ini 2026-03-15 12:28:14,443 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tekcfdbi/solo_L1_stix-cal-energy_20210213_V03_ecc_in.fits 2026-03-15 12:37:08,061 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210213_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210213_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 12:37:14,056 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 12:37:14,063 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tekcfdbi 2026-03-15 12:37:14,090 No soops found for time: 2021-02-13 00:21:24.714986 - 2021-02-13 02:45:24.729649 2026-03-15 12:37:14,185 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/13/CAL/solo_CAL_stix-cal-energy_20210213T002124-20210213T024524_V02.fits 2026-03-15 12:37:14,343 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l_e5i3q4 2026-03-15 12:37:14,344 Read config from in: /tmp/ecc_context_ecc_cfg_1_l_e5i3q4/post_ecc.ini 2026-03-15 12:37:15,588 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l_e5i3q4/solo_L1_stix-cal-energy_20210215_V03_ecc_in.fits 2026-03-15 12:46:06,992 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210215_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210215_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 12:46:12,952 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 12:46:12,960 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l_e5i3q4 2026-03-15 12:46:12,986 No soops found for time: 2021-02-15 00:31:01.009224 - 2021-02-15 02:55:00.023885 2026-03-15 12:46:13,079 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/15/CAL/solo_CAL_stix-cal-energy_20210215T003101-20210215T025500_V02.fits 2026-03-15 12:46:13,238 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2930bswf 2026-03-15 12:46:13,239 Read config from in: /tmp/ecc_context_ecc_cfg_1_2930bswf/post_ecc.ini 2026-03-15 12:46:14,483 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2930bswf/solo_L1_stix-cal-energy_20210204_V03_ecc_in.fits 2026-03-15 12:55:19,821 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210204_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210204_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 12:55:25,905 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 12:55:25,912 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2930bswf 2026-03-15 12:55:25,937 No soops found for time: 2021-02-04 00:11:15.393789 - 2021-02-04 02:35:15.408452 2026-03-15 12:55:26,031 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/02/04/CAL/solo_CAL_stix-cal-energy_20210204T001115-20210204T023515_V02.fits 2026-03-15 12:55:26,463 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u6rc0gzk 2026-03-15 12:55:26,463 Read config from in: /tmp/ecc_context_ecc_cfg_1_u6rc0gzk/post_ecc.ini 2026-03-15 12:55:27,717 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u6rc0gzk/solo_L1_stix-cal-energy_20210430_V03_ecc_in.fits 2026-03-15 13:04:28,327 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210430_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210430_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210430_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210430_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 13:04:34,320 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 13:04:34,327 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u6rc0gzk 2026-03-15 13:04:34,353 No soops found for time: 2021-04-30 04:19:58.803893 - 2021-04-30 06:43:57.818456 2026-03-15 13:04:34,447 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/30/CAL/solo_CAL_stix-cal-energy_20210430T041958-20210430T064357_V02.fits 2026-03-15 13:04:34,605 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0u1fhwcx 2026-03-15 13:04:34,606 Read config from in: /tmp/ecc_context_ecc_cfg_1_0u1fhwcx/post_ecc.ini 2026-03-15 13:04:37,255 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0u1fhwcx/solo_L1_stix-cal-energy_20210410_V03_ecc_in.fits 2026-03-15 13:13:42,999 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210410_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210410_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210410_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210410_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 13:13:48,930 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 13:13:48,937 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0u1fhwcx 2026-03-15 13:13:48,961 Soop found: SOOP 2026-03-15 13:13:49,053 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/10/CAL/solo_CAL_stix-cal-energy_20210410T014623-20210410T041023_V02.fits 2026-03-15 13:13:49,213 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sloltatg 2026-03-15 13:13:49,214 Read config from in: /tmp/ecc_context_ecc_cfg_1_sloltatg/post_ecc.ini 2026-03-15 13:13:50,448 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sloltatg/solo_L1_stix-cal-energy_20210401_V03_ecc_in.fits 2026-03-15 13:22:53,190 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210401_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210401_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210401_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210401_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 13:22:59,079 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 13:22:59,086 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sloltatg 2026-03-15 13:22:59,111 No soops found for time: 2021-04-01 01:36:14.581638 - 2021-04-01 04:00:14.596120 2026-03-15 13:22:59,205 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/01/CAL/solo_CAL_stix-cal-energy_20210401T013614-20210401T040014_V02.fits 2026-03-15 13:22:59,367 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fkw277j_ 2026-03-15 13:22:59,368 Read config from in: /tmp/ecc_context_ecc_cfg_1_fkw277j_/post_ecc.ini 2026-03-15 13:23:00,604 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fkw277j_/solo_L1_stix-cal-energy_20210424_V03_ecc_in.fits 2026-03-15 13:32:02,565 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210424_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210424_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210424_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210424_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 13:32:08,591 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 13:32:08,598 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fkw277j_ 2026-03-15 13:32:08,623 No soops found for time: 2021-04-24 17:58:48.024150 - 2021-04-24 20:22:47.038689 2026-03-15 13:32:08,716 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/24/CAL/solo_CAL_stix-cal-energy_20210424T175848-20210424T202247_V02.fits 2026-03-15 13:32:08,870 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uao5gaya 2026-03-15 13:32:08,871 Read config from in: /tmp/ecc_context_ecc_cfg_1_uao5gaya/post_ecc.ini 2026-03-15 13:32:10,110 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uao5gaya/solo_L1_stix-cal-energy_20210408_V03_ecc_in.fits 2026-03-15 13:41:13,753 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210408_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210408_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210408_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210408_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 13:41:19,702 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 13:41:19,709 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uao5gaya 2026-03-15 13:41:19,734 No soops found for time: 2021-04-08 01:46:15.596421 - 2021-04-08 04:10:14.610902 2026-03-15 13:41:19,825 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/08/CAL/solo_CAL_stix-cal-energy_20210408T014615-20210408T041014_V02.fits 2026-03-15 13:41:19,983 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kakhhggg 2026-03-15 13:41:19,983 Read config from in: /tmp/ecc_context_ecc_cfg_1_kakhhggg/post_ecc.ini 2026-03-15 13:41:21,216 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kakhhggg/solo_L1_stix-cal-energy_20210405_V03_ecc_in.fits 2026-03-15 13:50:23,366 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210405_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210405_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210405_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210405_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 13:50:29,394 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 13:50:29,401 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kakhhggg 2026-03-15 13:50:29,424 No soops found for time: 2021-04-05 01:46:01.161921 - 2021-04-05 04:10:00.176402 2026-03-15 13:50:29,517 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/05/CAL/solo_CAL_stix-cal-energy_20210405T014601-20210405T041000_V02.fits 2026-03-15 13:50:29,672 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u_8op_6j 2026-03-15 13:50:29,673 Read config from in: /tmp/ecc_context_ecc_cfg_1_u_8op_6j/post_ecc.ini 2026-03-15 13:50:30,906 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u_8op_6j/solo_L1_stix-cal-energy_20210414_V03_ecc_in.fits 2026-03-15 13:59:30,402 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210414_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210414_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210414_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210414_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 13:59:37,961 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 13:59:37,968 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u_8op_6j 2026-03-15 13:59:37,993 Soop found: SOOP 2026-03-15 13:59:38,085 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/14/CAL/solo_CAL_stix-cal-energy_20210414T015612-20210414T042015_V02.fits 2026-03-15 13:59:38,244 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g_61wxbs 2026-03-15 13:59:38,244 Read config from in: /tmp/ecc_context_ecc_cfg_1_g_61wxbs/post_ecc.ini 2026-03-15 13:59:39,488 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g_61wxbs/solo_L1_stix-cal-energy_20210407_V03_ecc_in.fits 2026-03-15 14:08:49,712 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210407_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210407_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210407_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210407_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 14:08:55,643 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 14:08:55,649 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g_61wxbs 2026-03-15 14:08:55,674 No soops found for time: 2021-04-07 01:46:10.451587 - 2021-04-07 04:10:09.466068 2026-03-15 14:08:55,766 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/07/CAL/solo_CAL_stix-cal-energy_20210407T014610-20210407T041009_V02.fits 2026-03-15 14:08:55,924 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7kgjgyx4 2026-03-15 14:08:55,925 Read config from in: /tmp/ecc_context_ecc_cfg_1_7kgjgyx4/post_ecc.ini 2026-03-15 14:08:57,150 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7kgjgyx4/solo_L1_stix-cal-energy_20210406_V03_ecc_in.fits 2026-03-15 14:17:57,315 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210406_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210406_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 14:18:03,259 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 14:18:03,266 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7kgjgyx4 2026-03-15 14:18:03,291 No soops found for time: 2021-04-06 01:46:05.306753 - 2021-04-06 04:10:05.321236 2026-03-15 14:18:03,384 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/06/CAL/solo_CAL_stix-cal-energy_20210406T014605-20210406T041005_V02.fits 2026-03-15 14:18:03,535 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5_n_s9rq 2026-03-15 14:18:03,536 Read config from in: /tmp/ecc_context_ecc_cfg_1_5_n_s9rq/post_ecc.ini 2026-03-15 14:18:04,767 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5_n_s9rq/solo_L1_stix-cal-energy_20210403_V03_ecc_in.fits 2026-03-15 14:27:01,403 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210403_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210403_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210403_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210403_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 14:27:08,049 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 14:27:08,057 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5_n_s9rq 2026-03-15 14:27:08,085 No soops found for time: 2021-04-03 01:36:22.871302 - 2021-04-03 04:00:22.885784 2026-03-15 14:27:08,185 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/03/CAL/solo_CAL_stix-cal-energy_20210403T013622-20210403T040022_V02.fits 2026-03-15 14:27:08,354 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xx61l9cr 2026-03-15 14:27:08,355 Read config from in: /tmp/ecc_context_ecc_cfg_1_xx61l9cr/post_ecc.ini 2026-03-15 14:27:09,618 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xx61l9cr/solo_L1_stix-cal-energy_20210417_V03_ecc_in.fits 2026-03-15 14:36:20,495 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210417_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210417_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210417_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210417_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 14:36:26,524 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 14:36:26,534 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xx61l9cr 2026-03-15 14:36:26,568 No soops found for time: 2021-04-17 02:03:16.909862 - 2021-04-17 04:27:16.924402 2026-03-15 14:36:26,667 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/17/CAL/solo_CAL_stix-cal-energy_20210417T020316-20210417T042716_V02.fits 2026-03-15 14:36:26,837 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_33r7ap0h 2026-03-15 14:36:26,838 Read config from in: /tmp/ecc_context_ecc_cfg_1_33r7ap0h/post_ecc.ini 2026-03-15 14:36:28,087 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_33r7ap0h/solo_L1_stix-cal-energy_20210423_V03_ecc_in.fits 2026-03-15 14:45:24,451 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210423_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210423_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210423_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210423_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 14:45:30,489 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 14:45:30,497 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_33r7ap0h 2026-03-15 14:45:30,523 No soops found for time: 2021-04-23 17:58:43.878742 - 2021-04-23 20:22:42.893281 2026-03-15 14:45:30,617 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/23/CAL/solo_CAL_stix-cal-energy_20210423T175843-20210423T202242_V02.fits 2026-03-15 14:45:30,778 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jclfwtuz 2026-03-15 14:45:30,779 Read config from in: /tmp/ecc_context_ecc_cfg_1_jclfwtuz/post_ecc.ini 2026-03-15 14:45:32,032 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jclfwtuz/solo_L1_stix-cal-energy_20210416_V03_ecc_in.fits 2026-03-15 14:54:39,897 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210416_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210416_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210416_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210416_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 14:54:47,234 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 14:54:47,241 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jclfwtuz 2026-03-15 14:54:47,266 No soops found for time: 2021-04-16 02:03:12.764454 - 2021-04-16 04:27:11.778993 2026-03-15 14:54:47,358 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/16/CAL/solo_CAL_stix-cal-energy_20210416T020312-20210416T042711_V02.fits 2026-03-15 14:54:47,517 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zwn5xbps 2026-03-15 14:54:47,518 Read config from in: /tmp/ecc_context_ecc_cfg_1_zwn5xbps/post_ecc.ini 2026-03-15 14:54:48,752 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zwn5xbps/solo_L1_stix-cal-energy_20210421_V03_ecc_in.fits 2026-03-15 15:03:43,466 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210421_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210421_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210421_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210421_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 15:03:49,373 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 15:03:49,380 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zwn5xbps 2026-03-15 15:03:49,409 No soops found for time: 2021-04-21 17:58:34.587925 - 2021-04-21 20:22:34.602465 2026-03-15 15:03:49,503 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/21/CAL/solo_CAL_stix-cal-energy_20210421T175834-20210421T202234_V02.fits 2026-03-15 15:03:49,658 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0nhdf7ty 2026-03-15 15:03:49,659 Read config from in: /tmp/ecc_context_ecc_cfg_1_0nhdf7ty/post_ecc.ini 2026-03-15 15:03:50,899 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0nhdf7ty/solo_L1_stix-cal-energy_20210412_V03_ecc_in.fits 2026-03-15 15:12:52,276 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210412_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210412_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210412_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210412_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 15:12:58,230 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 15:12:58,237 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0nhdf7ty 2026-03-15 15:12:58,262 Soop found: SOOP 2026-03-15 15:12:58,355 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/12/CAL/solo_CAL_stix-cal-energy_20210412T015601-20210412T042000_V02.fits 2026-03-15 15:12:58,513 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_711pvcfs 2026-03-15 15:12:58,514 Read config from in: /tmp/ecc_context_ecc_cfg_1_711pvcfs/post_ecc.ini 2026-03-15 15:12:59,764 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_711pvcfs/solo_L1_stix-cal-energy_20210427_V03_ecc_in.fits 2026-03-15 15:21:47,282 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210427_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210427_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210427_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210427_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 15:21:53,258 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 15:21:53,267 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_711pvcfs 2026-03-15 15:21:53,297 No soops found for time: 2021-04-27 04:19:46.377654 - 2021-04-27 06:43:45.392192 2026-03-15 15:21:53,391 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/27/CAL/solo_CAL_stix-cal-energy_20210427T041946-20210427T064345_V02.fits 2026-03-15 15:21:53,548 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eplp308s 2026-03-15 15:21:53,549 Read config from in: /tmp/ecc_context_ecc_cfg_1_eplp308s/post_ecc.ini 2026-03-15 15:21:54,801 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eplp308s/solo_L1_stix-cal-energy_20210411_V03_ecc_in.fits 2026-03-15 15:31:01,915 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210411_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210411_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210411_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210411_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 15:31:07,988 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 15:31:07,994 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eplp308s 2026-03-15 15:31:08,019 Soop found: SOOP 2026-03-15 15:31:08,110 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/11/CAL/solo_CAL_stix-cal-energy_20210411T014629-20210411T041028_V02.fits 2026-03-15 15:31:08,299 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ce176zt4 2026-03-15 15:31:08,300 Read config from in: /tmp/ecc_context_ecc_cfg_1_ce176zt4/post_ecc.ini 2026-03-15 15:31:09,543 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ce176zt4/solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits 2026-03-15 15:39:48,055 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 15:39:54,325 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 15:39:54,331 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ce176zt4 2026-03-15 15:39:54,362 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_djo2ikb9 2026-03-15 15:39:54,363 Read config from in: /tmp/ecc_context_ecc_cfg_1_djo2ikb9/post_ecc.ini 2026-03-15 15:39:57,088 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_djo2ikb9/solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits 2026-03-15 15:48:46,230 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210426_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 15:48:52,237 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 15:48:52,243 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_djo2ikb9 2026-03-15 15:48:52,268 No soops found for time: 2021-04-26 02:18:21.219993 - 2021-04-26 02:29:51.221154 2026-03-15 15:48:52,361 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/26/CAL/solo_CAL_stix-cal-energy_20210426T021821-20210426T022951_V02.fits 2026-03-15 15:48:52,396 No soops found for time: 2021-04-26 04:19:41.232244 - 2021-04-26 06:43:40.246783 2026-03-15 15:48:52,485 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/26/CAL/solo_CAL_stix-cal-energy_20210426T041941-20210426T064340_V02.fits 2026-03-15 15:48:52,643 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0aab0r1q 2026-03-15 15:48:52,644 Read config from in: /tmp/ecc_context_ecc_cfg_1_0aab0r1q/post_ecc.ini 2026-03-15 15:48:53,871 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0aab0r1q/solo_L1_stix-cal-energy_20210422_V03_ecc_in.fits 2026-03-15 15:57:50,119 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210422_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210422_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210422_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210422_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 15:57:56,061 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 15:57:56,068 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0aab0r1q 2026-03-15 15:57:56,092 No soops found for time: 2021-04-22 17:58:38.733333 - 2021-04-22 20:22:38.747873 2026-03-15 15:57:56,184 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/22/CAL/solo_CAL_stix-cal-energy_20210422T175838-20210422T202238_V02.fits 2026-03-15 15:57:56,341 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y612e841 2026-03-15 15:57:56,342 Read config from in: /tmp/ecc_context_ecc_cfg_1_y612e841/post_ecc.ini 2026-03-15 15:57:57,576 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y612e841/solo_L1_stix-cal-energy_20210428_V03_ecc_in.fits 2026-03-15 16:06:53,261 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210428_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210428_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210428_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210428_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 16:06:59,191 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 16:06:59,198 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y612e841 2026-03-15 16:06:59,223 No soops found for time: 2021-04-28 04:19:50.512698 - 2021-04-28 06:43:49.527269 2026-03-15 16:06:59,316 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/28/CAL/solo_CAL_stix-cal-energy_20210428T041950-20210428T064349_V02.fits 2026-03-15 16:06:59,478 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__4whwhaf 2026-03-15 16:06:59,478 Read config from in: /tmp/ecc_context_ecc_cfg_1__4whwhaf/post_ecc.ini 2026-03-15 16:07:00,721 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__4whwhaf/solo_L1_stix-cal-energy_20210409_V03_ecc_in.fits 2026-03-15 16:15:59,360 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210409_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210409_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210409_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210409_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 16:16:05,320 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 16:16:05,326 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__4whwhaf 2026-03-15 16:16:05,353 Soop found: SOOP 2026-03-15 16:16:05,445 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/09/CAL/solo_CAL_stix-cal-energy_20210409T014619-20210409T041018_V02.fits 2026-03-15 16:16:05,601 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xhy8hjo3 2026-03-15 16:16:05,601 Read config from in: /tmp/ecc_context_ecc_cfg_1_xhy8hjo3/post_ecc.ini 2026-03-15 16:16:06,839 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xhy8hjo3/solo_L1_stix-cal-energy_20210429_V03_ecc_in.fits 2026-03-15 16:25:07,422 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210429_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210429_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210429_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210429_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 16:25:13,378 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 16:25:13,386 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xhy8hjo3 2026-03-15 16:25:13,412 No soops found for time: 2021-04-29 04:19:54.658237 - 2021-04-29 06:43:53.672800 2026-03-15 16:25:13,507 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/29/CAL/solo_CAL_stix-cal-energy_20210429T041954-20210429T064353_V02.fits 2026-03-15 16:25:13,671 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2kbtvap6 2026-03-15 16:25:13,672 Read config from in: /tmp/ecc_context_ecc_cfg_1_2kbtvap6/post_ecc.ini 2026-03-15 16:25:14,930 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2kbtvap6/solo_L1_stix-cal-energy_20210402_V03_ecc_in.fits 2026-03-15 16:34:14,964 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210402_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210402_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210402_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210402_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 16:34:20,854 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 16:34:20,861 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2kbtvap6 2026-03-15 16:34:20,887 No soops found for time: 2021-04-02 01:36:18.726470 - 2021-04-02 04:00:18.740952 2026-03-15 16:34:20,980 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/02/CAL/solo_CAL_stix-cal-energy_20210402T013618-20210402T040018_V02.fits 2026-03-15 16:34:21,139 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hq7cx3ux 2026-03-15 16:34:21,139 Read config from in: /tmp/ecc_context_ecc_cfg_1_hq7cx3ux/post_ecc.ini 2026-03-15 16:34:23,772 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hq7cx3ux/solo_L1_stix-cal-energy_20210413_V03_ecc_in.fits 2026-03-15 16:43:24,081 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210413_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210413_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210413_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210413_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 16:43:30,075 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 16:43:30,082 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hq7cx3ux 2026-03-15 16:43:30,106 Soop found: SOOP 2026-03-15 16:43:30,199 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/13/CAL/solo_CAL_stix-cal-energy_20210413T015605-20210413T042005_V02.fits 2026-03-15 16:43:30,359 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8130xpsh 2026-03-15 16:43:30,359 Read config from in: /tmp/ecc_context_ecc_cfg_1_8130xpsh/post_ecc.ini 2026-03-15 16:43:31,604 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8130xpsh/solo_L1_stix-cal-energy_20210415_V03_ecc_in.fits 2026-03-15 16:52:40,425 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210415_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210415_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210415_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210415_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 16:52:46,369 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 16:52:46,375 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8130xpsh 2026-03-15 16:52:46,403 No soops found for time: 2021-04-15 02:03:08.619046 - 2021-04-15 04:27:07.633585 2026-03-15 16:52:46,497 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/15/CAL/solo_CAL_stix-cal-energy_20210415T020308-20210415T042707_V02.fits 2026-03-15 16:52:46,656 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bdmhhv7j 2026-03-15 16:52:46,657 Read config from in: /tmp/ecc_context_ecc_cfg_1_bdmhhv7j/post_ecc.ini 2026-03-15 16:52:47,891 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bdmhhv7j/solo_L1_stix-cal-energy_20210404_V03_ecc_in.fits 2026-03-15 17:01:57,639 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20210404_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20210404_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20210404_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20210404_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-15 17:02:03,695 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-15 17:02:03,704 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bdmhhv7j 2026-03-15 17:02:03,730 No soops found for time: 2021-04-04 01:36:28.016135 - 2021-04-04 04:00:27.030616 2026-03-15 17:02:03,824 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2021/04/04/CAL/solo_CAL_stix-cal-energy_20210404T013628-20210404T040027_V02.fits