2026-03-05 10:54:25,079 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-03-05 10:54:25,986 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260304_001.tm 2026-03-05 10:54:26,245 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260304_001.tm 2026-03-05 10:54:26,245 Create SOCManager @ /data/stix/SOLSOC/from_edds/tm/processing 2026-03-05 10:54:26,253 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-03-05 10:54:26,288 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-05 10:54:26,289 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-03-05 10:54:26,290 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-05 10:54:26,290 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M23_V01.json 2026-03-05 10:54:26,291 newer version (257) found for LTP23_Apr2026-Jun2026: replacing 2026-03-05 10:54:26,291 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-03-05 10:54:26,292 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-03-05 10:54:26,293 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-03-05 10:54:26,294 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-03-05 10:54:26,294 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-03-05 10:54:26,295 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-03-05 10:54:26,295 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-03-05 10:54:26,297 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-03-05 10:54:26,297 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-03-05 10:54:26,298 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-03-05 10:54:26,298 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-03-05 10:54:26,299 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-03-05 10:54:26,300 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-03-05 10:54:26,301 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-03-05 10:54:26,301 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-03-05 10:54:26,302 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-03-05 10:54:26,302 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-03-05 10:54:26,303 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-03-05 10:54:26,303 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-03-05 10:54:26,305 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-03-05 10:54:26,305 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-03-05 10:54:26,306 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-03-05 10:54:26,306 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-03-05 10:54:26,307 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-03-05 10:54:26,307 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-03-05 10:54:26,308 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-03-05 10:54:26,308 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-03-05 10:54:26,309 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-03-05 10:54:26,309 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-03-05 10:54:26,310 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-03-05 10:54:26,310 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-03-05 10:54:26,311 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-03-05 10:54:26,311 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-03-05 10:54:26,312 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-03-05 10:54:26,312 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-03-05 10:54:26,313 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-03-05 10:54:26,314 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-03-05 10:54:26,315 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-03-05 10:54:26,315 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-03-05 10:54:26,316 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-03-05 10:54:26,316 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-03-05 10:54:26,317 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-03-05 10:54:26,317 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-03-05 10:54:26,318 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-03-05 10:54:26,318 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-03-05 10:54:26,319 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-03-05 10:54:26,319 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-03-05 10:54:26,319 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-03-05 10:54:26,320 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-03-05 10:54:26,320 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-03-05 10:54:26,321 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-03-05 10:54:26,321 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-03-05 10:54:26,321 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-03-05 10:54:26,322 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-03-05 10:54:26,322 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-03-05 10:54:26,323 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-03-05 10:54:26,323 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-03-05 10:54:26,324 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-03-05 10:54:26,324 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-03-05 10:54:26,325 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-05 10:54:26,325 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-03-05 10:54:26,326 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-03-05 10:54:26,326 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-03-05 10:54:26,327 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-03-05 10:54:26,327 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-03-05 10:54:26,329 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-03-05 10:54:26,329 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-03-05 10:54:26,330 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-03-05 10:54:26,331 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-03-05 10:54:26,331 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-03-05 10:54:26,331 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-03-05 10:54:26,332 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-03-05 10:54:26,332 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-03-05 10:54:26,332 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-03-05 10:54:26,332 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-03-05 10:54:26,332 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-03-05 10:54:26,333 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-03-05 10:54:26,333 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-05 10:54:26,333 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-03-05 10:54:26,333 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-05 10:54:26,333 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-03-05 10:54:26,333 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-05 10:54:26,334 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-03-05 10:54:26,334 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-05 10:54:26,334 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-03-05 10:54:26,334 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-03-05 10:54:26,616 SOOP Rebuild Index: soops: 562observations 1247 2026-03-05 10:54:42,327 PIPELINE VERSION Version: 1.7.2 Common instrument config version: v0.1.9 PROCESSING VERSIONS Prod: Ephemeris File: /home/stixcore/STIXCore/stixcore/products/ANC/aspect.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/CAL/energy.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/stixcore/STIXCore/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-03-05 10:54:42,328 CONFIG [Paths] tm_archive = /data/stix/SOLSOC/from_edds/tm/processing fits_archive = /data/stix/out/fits_v1.2.0 spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12388 parallel_batchsize_l0 = 100 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = INFO log_dir = /data/stix/out/fits_v1.2.0/logging error_mail_send = True error_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch sync_tm_at_start = True stop_after_unprocessed = True start_with_unprocessed = True last_processed = TM_LTP21_BatchRequest.PktTmRaw.SOL.0.2025.237.08.00.24.563.NHzM@2025.365.16.00.00.336.1.xml.out history_db_file = /home/stixcore/soar_pub/processing_history.sqlite [Publish] db_file = /home/stixcore/soar_pub/published.sqlite include_levels = L0, L1, ANC, LL03 waiting_period = 42d target_dir = /home/stixcore/from_pub099 report_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie report_mail_send = True same_esa_name_dir = /data/stix/out/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/fits_v1.2.0 ll_waiting_period = 0d target_host = pub026.cs.technik.fhnw.ch supplement_report = /home/stixcore/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal,asp log_dir = /data/stix/out/fits_v1.2.0/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-03-05 10:54:42,329 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 36325 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260304_001.tm'), 'pred', datetime.datetime(2026, 3, 4, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260304_001.tm'), 'flown', datetime.datetime(2026, 3, 4, 0, 0))] IDBManager: /home/stixcore/STIXCore/stixcore/data/idb Versions: [{'label': '2.26.36', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-03-05 10:54:43,489 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260304_001.tm 2026-03-05 10:54:43,746 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260304_001.tm 2026-03-05 10:54:43,747 Loaded 1 ECC configurations from index 2026-03-05 10:54:43,939 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20230710.csv 2026-03-05 10:54:43,978 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zvxo9hmi 2026-03-05 10:54:43,979 Read config from in: /tmp/ecc_context_ecc_cfg_1_zvxo9hmi/post_ecc.ini 2026-03-05 10:54:45,228 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zvxo9hmi/solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits 2026-03-05 11:04:23,425 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:04:29,694 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 11:04:29,702 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zvxo9hmi 2026-03-05 11:04:29,746 No soops found for time: 2023-10-30 02:01:38.556092 - 2023-10-30 04:25:38.571765 2026-03-05 11:04:29,881 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/30/CAL/solo_CAL_stix-cal-energy_20231030T020138-20231030T042538_V02.fits 2026-03-05 11:04:30,056 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bn1c_vrj 2026-03-05 11:04:30,056 Read config from in: /tmp/ecc_context_ecc_cfg_1_bn1c_vrj/post_ecc.ini 2026-03-05 11:04:31,296 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bn1c_vrj/solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits 2026-03-05 11:14:44,335 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:14:50,759 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-05 11:14:50,767 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bn1c_vrj 2026-03-05 11:14:50,796 No soops found for time: 2023-10-10 02:42:52.399467 - 2023-10-10 05:06:52.415510 2026-03-05 11:14:52,608 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/10/CAL/solo_CAL_stix-cal-energy_20231010T024252-20231010T050652_V02.fits 2026-03-05 11:14:52,771 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1z5k8yh1 2026-03-05 11:14:52,771 Read config from in: /tmp/ecc_context_ecc_cfg_1_1z5k8yh1/post_ecc.ini 2026-03-05 11:14:54,004 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1z5k8yh1/solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits 2026-03-05 11:24:40,021 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 96 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:24:46,265 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 11:24:46,268 ECC result Gain_Cor 0.0 for DET 9 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,270 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,270 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,270 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,275 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1z5k8yh1 2026-03-05 11:24:46,304 Soop found: SOOP 2026-03-05 11:24:46,407 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/01/CAL/solo_CAL_stix-cal-energy_20231001T011137-20231001T033920_V02.fits 2026-03-05 11:24:46,854 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_721z271w 2026-03-05 11:24:46,855 Read config from in: /tmp/ecc_context_ecc_cfg_1_721z271w/post_ecc.ini 2026-03-05 11:24:48,126 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_721z271w/solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits 2026-03-05 11:34:48,214 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:34:54,369 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 11:34:54,376 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_721z271w 2026-03-05 11:34:54,405 Soop found: SOOP 2026-03-05 11:34:54,505 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/24/CAL/solo_CAL_stix-cal-energy_20231024T000408-20231024T022808_V02.fits 2026-03-05 11:34:54,666 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zbxag_jd 2026-03-05 11:34:54,666 Read config from in: /tmp/ecc_context_ecc_cfg_1_zbxag_jd/post_ecc.ini 2026-03-05 11:34:55,914 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zbxag_jd/solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits 2026-03-05 11:45:44,706 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:45:50,891 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 11:45:50,898 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zbxag_jd 2026-03-05 11:45:50,927 Soop found: SOOP 2026-03-05 11:45:51,026 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/08/CAL/solo_CAL_stix-cal-energy_20231008T020335-20231008T043043_V02.fits 2026-03-05 11:45:51,183 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cwqoqef_ 2026-03-05 11:45:51,183 Read config from in: /tmp/ecc_context_ecc_cfg_1_cwqoqef_/post_ecc.ini 2026-03-05 11:45:52,429 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cwqoqef_/solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits 2026-03-05 11:56:24,968 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:56:31,216 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 11:56:31,223 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cwqoqef_ 2026-03-05 11:56:31,253 Soop found: SOOP 2026-03-05 11:56:31,354 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/05/CAL/solo_CAL_stix-cal-energy_20231005T002207-20231005T025100_V02.fits 2026-03-05 11:56:31,797 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3zr8dwgl 2026-03-05 11:56:31,797 Read config from in: /tmp/ecc_context_ecc_cfg_1_3zr8dwgl/post_ecc.ini 2026-03-05 11:56:33,059 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3zr8dwgl/solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits 2026-03-05 12:08:30,972 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:08:37,161 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 12:08:37,169 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3zr8dwgl 2026-03-05 12:08:37,204 Soop found: SOOP 2026-03-05 12:08:37,306 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/14/CAL/solo_CAL_stix-cal-energy_20231014T025901-20231014T052300_V02.fits 2026-03-05 12:08:37,477 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8s1to04b 2026-03-05 12:08:37,478 Read config from in: /tmp/ecc_context_ecc_cfg_1_8s1to04b/post_ecc.ini 2026-03-05 12:08:38,806 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8s1to04b/solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits 2026-03-05 12:21:32,360 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:21:40,225 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 12:21:40,236 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8s1to04b 2026-03-05 12:21:40,263 Soop found: SOOP 2026-03-05 12:21:40,361 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/07/CAL/solo_CAL_stix-cal-energy_20231007T011129-20231007T033833_V02.fits 2026-03-05 12:21:40,522 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h5oz4xu5 2026-03-05 12:21:40,522 Read config from in: /tmp/ecc_context_ecc_cfg_1_h5oz4xu5/post_ecc.ini 2026-03-05 12:21:41,765 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h5oz4xu5/solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits 2026-03-05 12:31:04,016 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:31:10,193 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 12:31:10,200 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h5oz4xu5 2026-03-05 12:31:10,227 Soop found: SOOP 2026-03-05 12:31:10,328 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/20/CAL/solo_CAL_stix-cal-energy_20231020T030559-20231020T053104_V02.fits 2026-03-05 12:31:10,715 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5iqpol3q 2026-03-05 12:31:10,716 Read config from in: /tmp/ecc_context_ecc_cfg_1_5iqpol3q/post_ecc.ini 2026-03-05 12:31:11,958 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5iqpol3q/solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits 2026-03-05 12:41:50,761 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:41:56,957 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 12:41:56,964 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5iqpol3q 2026-03-05 12:41:56,991 Soop found: SOOP 2026-03-05 12:41:57,092 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/06/CAL/solo_CAL_stix-cal-energy_20231006T011123-20231006T033523_V02.fits 2026-03-05 12:41:57,261 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kjmscdri 2026-03-05 12:41:57,262 Read config from in: /tmp/ecc_context_ecc_cfg_1_kjmscdri/post_ecc.ini 2026-03-05 12:41:58,499 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kjmscdri/solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits 2026-03-05 12:52:19,480 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 96 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:52:25,768 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,772 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,772 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,772 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,777 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kjmscdri 2026-03-05 12:52:25,804 Soop found: SOOP 2026-03-05 12:52:25,902 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/03/CAL/solo_CAL_stix-cal-energy_20231003T023906-20231003T044711_V02.fits 2026-03-05 12:52:26,063 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xg5nqlxa 2026-03-05 12:52:26,064 Read config from in: /tmp/ecc_context_ecc_cfg_1_xg5nqlxa/post_ecc.ini 2026-03-05 12:52:27,308 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xg5nqlxa/solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits 2026-03-05 13:01:58,324 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:02:04,606 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:02:04,613 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xg5nqlxa 2026-03-05 13:02:04,642 Soop found: SOOP 2026-03-05 13:02:04,741 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/17/CAL/solo_CAL_stix-cal-energy_20231017T030024-20231017T052432_V02.fits 2026-03-05 13:02:05,184 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gm1vtkdm 2026-03-05 13:02:05,185 Read config from in: /tmp/ecc_context_ecc_cfg_1_gm1vtkdm/post_ecc.ini 2026-03-05 13:02:06,440 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gm1vtkdm/solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits 2026-03-05 13:11:43,353 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:11:49,686 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:11:49,693 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gm1vtkdm 2026-03-05 13:11:49,722 Soop found: SOOP 2026-03-05 13:11:49,820 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/31/CAL/solo_CAL_stix-cal-energy_20231031T020144-20231031T042549_V02.fits 2026-03-05 13:11:49,995 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s5cfl252 2026-03-05 13:11:49,996 Read config from in: /tmp/ecc_context_ecc_cfg_1_s5cfl252/post_ecc.ini 2026-03-05 13:11:52,841 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s5cfl252/solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits 2026-03-05 13:21:26,967 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:21:33,223 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:21:33,230 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s5cfl252 2026-03-05 13:21:33,256 Soop found: SOOP 2026-03-05 13:21:33,354 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/18/CAL/solo_CAL_stix-cal-energy_20231018T030549-20231018T052948_V02.fits 2026-03-05 13:21:33,793 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wavnbnq8 2026-03-05 13:21:33,793 Read config from in: /tmp/ecc_context_ecc_cfg_1_wavnbnq8/post_ecc.ini 2026-03-05 13:21:35,052 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wavnbnq8/solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits 2026-03-05 13:31:36,932 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:31:43,081 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:31:43,088 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wavnbnq8 2026-03-05 13:31:43,115 Soop found: SOOP 2026-03-05 13:31:43,212 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/23/CAL/solo_CAL_stix-cal-energy_20231023T000401-20231023T022801_V02.fits 2026-03-05 13:31:43,366 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qrpp35o4 2026-03-05 13:31:43,367 Read config from in: /tmp/ecc_context_ecc_cfg_1_qrpp35o4/post_ecc.ini 2026-03-05 13:31:44,604 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qrpp35o4/solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits 2026-03-05 13:41:15,865 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:41:22,114 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:41:22,122 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qrpp35o4 2026-03-05 13:41:22,149 Soop found: SOOP 2026-03-05 13:41:22,251 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/16/CAL/solo_CAL_stix-cal-energy_20231016T030018-20231016T052418_V02.fits 2026-03-05 13:41:22,415 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bjdhh8kp 2026-03-05 13:41:22,415 Read config from in: /tmp/ecc_context_ecc_cfg_1_bjdhh8kp/post_ecc.ini 2026-03-05 13:41:23,664 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bjdhh8kp/solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits 2026-03-05 13:50:47,473 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:50:53,734 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:50:53,741 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bjdhh8kp 2026-03-05 13:50:53,770 Soop found: SOOP 2026-03-05 13:50:53,868 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/21/CAL/solo_CAL_stix-cal-energy_20231021T052901-20231021T075301_V02.fits 2026-03-05 13:50:54,033 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lvkxzj57 2026-03-05 13:50:54,034 Read config from in: /tmp/ecc_context_ecc_cfg_1_lvkxzj57/post_ecc.ini 2026-03-05 13:50:55,340 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lvkxzj57/solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits 2026-03-05 14:00:14,240 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:00:20,463 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:00:20,470 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lvkxzj57 2026-03-05 14:00:20,498 Soop found: SOOP 2026-03-05 14:00:20,598 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/12/CAL/solo_CAL_stix-cal-energy_20231012T025848-20231012T052248_V02.fits 2026-03-05 14:00:20,769 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__tik5bet 2026-03-05 14:00:20,770 Read config from in: /tmp/ecc_context_ecc_cfg_1__tik5bet/post_ecc.ini 2026-03-05 14:00:22,032 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__tik5bet/solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits 2026-03-05 14:09:58,520 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:10:06,905 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:10:06,913 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__tik5bet 2026-03-05 14:10:06,942 No soops found for time: 2023-10-27 01:44:31.083808 - 2023-10-27 04:08:31.099549 2026-03-05 14:10:07,047 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/27/CAL/solo_CAL_stix-cal-energy_20231027T014431-20231027T040831_V02.fits 2026-03-05 14:10:07,219 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w3haamqz 2026-03-05 14:10:07,219 Read config from in: /tmp/ecc_context_ecc_cfg_1_w3haamqz/post_ecc.ini 2026-03-05 14:10:08,494 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w3haamqz/solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits 2026-03-05 14:20:07,728 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:20:13,907 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:20:13,914 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w3haamqz 2026-03-05 14:20:13,941 Soop found: SOOP 2026-03-05 14:20:13,941 Soop found: SOOP 2026-03-05 14:20:14,040 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/11/CAL/solo_CAL_stix-cal-energy_20231011T024258-20231011T050749_V02.fits 2026-03-05 14:20:14,442 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__fyz8p30 2026-03-05 14:20:14,443 Read config from in: /tmp/ecc_context_ecc_cfg_1__fyz8p30/post_ecc.ini 2026-03-05 14:20:15,683 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__fyz8p30/solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits 2026-03-05 14:29:41,863 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:29:48,035 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:29:48,042 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__fyz8p30 2026-03-05 14:29:48,068 Soop found: SOOP 2026-03-05 14:29:48,168 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/26/CAL/solo_CAL_stix-cal-energy_20231026T000421-20231026T023803_V02.fits 2026-03-05 14:29:48,329 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vu63fdfj 2026-03-05 14:29:48,330 Read config from in: /tmp/ecc_context_ecc_cfg_1_vu63fdfj/post_ecc.ini 2026-03-05 14:29:49,576 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vu63fdfj/solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits 2026-03-05 14:39:17,545 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:39:23,712 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:39:23,720 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vu63fdfj 2026-03-05 14:39:23,748 Soop found: SOOP 2026-03-05 14:39:23,849 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/19/CAL/solo_CAL_stix-cal-energy_20231019T030554-20231019T052953_V02.fits 2026-03-05 14:39:24,286 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lxsnnlal 2026-03-05 14:39:24,287 Read config from in: /tmp/ecc_context_ecc_cfg_1_lxsnnlal/post_ecc.ini 2026-03-05 14:39:25,530 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lxsnnlal/solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits 2026-03-05 14:49:06,019 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:49:12,199 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:49:12,206 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lxsnnlal 2026-03-05 14:49:12,234 Soop found: SOOP 2026-03-05 14:49:12,330 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/22/CAL/solo_CAL_stix-cal-energy_20231022T052907-20231022T072012_V02.fits 2026-03-05 14:49:12,496 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_82b3gp1z 2026-03-05 14:49:12,496 Read config from in: /tmp/ecc_context_ecc_cfg_1_82b3gp1z/post_ecc.ini 2026-03-05 14:49:13,750 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_82b3gp1z/solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits 2026-03-05 14:58:56,439 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:59:02,707 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 14:59:02,714 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_82b3gp1z 2026-03-05 14:59:02,742 Soop found: SOOP 2026-03-05 14:59:02,843 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/25/CAL/solo_CAL_stix-cal-energy_20231025T000415-20231025T022815_V02.fits 2026-03-05 14:59:03,010 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4jju9lvt 2026-03-05 14:59:03,011 Read config from in: /tmp/ecc_context_ecc_cfg_1_4jju9lvt/post_ecc.ini 2026-03-05 14:59:05,657 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4jju9lvt/solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits 2026-03-05 15:08:47,682 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 15:08:53,883 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 15:08:53,890 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4jju9lvt 2026-03-05 15:08:53,915 Soop found: SOOP 2026-03-05 15:08:53,915 Soop found: SOOP 2026-03-05 15:08:54,014 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/28/CAL/solo_CAL_stix-cal-energy_20231028T014437-20231028T040837_V02.fits 2026-03-05 15:08:54,159 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nv3c7kyz 2026-03-05 15:08:54,159 Read config from in: /tmp/ecc_context_ecc_cfg_1_nv3c7kyz/post_ecc.ini 2026-03-05 15:08:55,392 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nv3c7kyz/solo_L1_stix-cal-energy_20231009_V03_ecc_in.fits