2026-02-12 18:19:41,811 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-02-12 18:19:43,637 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260212_001.tm 2026-02-12 18:19:44,902 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260211_002.tm 2026-02-12 18:19:44,904 Create SOCManager @ /data/stix/out/fits_utest/tm/processing 2026-02-12 18:19:44,911 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-02-12 18:19:44,978 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-12 18:19:44,979 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-02-12 18:19:44,980 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-12 18:19:44,980 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-02-12 18:19:44,984 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-02-12 18:19:44,984 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-02-12 18:19:44,985 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-02-12 18:19:44,985 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-02-12 18:19:44,987 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-02-12 18:19:44,987 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-02-12 18:19:44,988 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-02-12 18:19:44,988 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-02-12 18:19:44,992 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-02-12 18:19:44,992 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-02-12 18:19:44,993 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-02-12 18:19:44,994 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-02-12 18:19:44,995 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-02-12 18:19:44,995 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-02-12 18:19:44,996 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-02-12 18:19:44,997 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-02-12 18:19:45,000 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-02-12 18:19:45,000 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-02-12 18:19:45,001 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-02-12 18:19:45,001 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-02-12 18:19:45,003 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-02-12 18:19:45,003 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-02-12 18:19:45,004 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-02-12 18:19:45,004 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-02-12 18:19:45,008 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-02-12 18:19:45,008 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-02-12 18:19:45,009 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-02-12 18:19:45,009 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-02-12 18:19:45,010 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-02-12 18:19:45,010 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-02-12 18:19:45,011 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-02-12 18:19:45,011 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-02-12 18:19:45,012 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-02-12 18:19:45,012 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-02-12 18:19:45,014 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-02-12 18:19:45,014 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-02-12 18:19:45,015 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-02-12 18:19:45,015 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-02-12 18:19:45,016 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-02-12 18:19:45,016 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-02-12 18:19:45,017 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-02-12 18:19:45,017 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-02-12 18:19:45,019 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-02-12 18:19:45,019 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-02-12 18:19:45,019 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-02-12 18:19:45,020 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-02-12 18:19:45,020 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-02-12 18:19:45,020 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-02-12 18:19:45,021 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-02-12 18:19:45,021 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-02-12 18:19:45,022 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-02-12 18:19:45,022 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-02-12 18:19:45,023 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-02-12 18:19:45,023 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-02-12 18:19:45,024 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-02-12 18:19:45,024 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-02-12 18:19:45,025 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-02-12 18:19:45,025 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-02-12 18:19:45,026 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-12 18:19:45,026 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-02-12 18:19:45,027 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-02-12 18:19:45,027 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-02-12 18:19:45,029 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-02-12 18:19:45,029 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-02-12 18:19:45,030 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-02-12 18:19:45,030 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-02-12 18:19:45,036 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-02-12 18:19:45,036 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-02-12 18:19:45,037 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-02-12 18:19:45,037 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-02-12 18:19:45,037 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-02-12 18:19:45,037 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-02-12 18:19:45,038 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-02-12 18:19:45,038 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-02-12 18:19:45,038 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-02-12 18:19:45,038 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-02-12 18:19:45,038 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-02-12 18:19:45,038 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-02-12 18:19:45,039 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-02-12 18:19:45,039 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-02-12 18:19:45,039 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-02-12 18:19:45,039 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-02-12 18:19:45,039 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-02-12 18:19:45,040 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-02-12 18:19:45,040 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-02-12 18:19:45,306 SOOP Rebuild Index: soops: 547observations 1191 2026-02-12 18:19:56,321 PIPELINE VERSION Version: 1.6.3.dev2+gc741a0222 Common instrument config version: v0.1.5 PROCESSING VERSIONS Prod: Ephemeris File: /home/nicky/STIXCore/stixcore/products/ANC/aspect.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/CAL/energy.py Vers: 3 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/nicky/STIXCore/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-02-12 18:19:56,336 CONFIG [Paths] tm_archive = /data/stix/out/fits_utest/tm/processing fits_archive = /data/stix/out/test/p311_comp_test/ spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12389 parallel_batchsize_l0 = 300 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = DEBUG log_dir = /data/stix/out/fits_utest/tm/logging error_mail_send = False error_mail_receivers = nicky.hochmuth@ateleris.ch error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch start_with_unprocessed = False last_processed = TM_BatchRequest.PktTmRaw.SOL.0.2023.305.15.33.13.852.bBWz@2023.352.21.00.01.039.1.xml.out [Publish] db_file = /home/nicky/soar_pub/published.sqlite include_levels = LL03 waiting_period = 0d target_dir = /home/nicky/soar_pub/to_soc report_mail_receivers = nicky.hochmuth@ateleris.ch report_mail_send = True same_esa_name_dir = /home/nicky/soar_pub/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/test/esa_release_test3/ ll_waiting_period = 0d supplement_report = /home/nicky/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal log_dir = /data/stix/out/fits_utest/tm/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop update_by_api = True [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-02-12 18:19:56,343 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 52588 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260212_001.tm'), 'pred', datetime.datetime(2026, 2, 12, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260211_002.tm'), 'flown', datetime.datetime(2026, 2, 11, 0, 0))] IDBManager: /home/nicky/STIXCore/stixcore/data/idb Versions: [{'label': '2.26.37', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.37', 'version': ['2', '26', '37']}, {'label': '2.26.36', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-02-12 18:19:57,392 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260212_001.tm 2026-02-12 18:19:57,671 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260211_002.tm 2026-02-12 18:19:57,672 Loaded 1 ECC configurations from index 2026-02-12 18:19:57,853 Successfully read ELUT file: /home/nicky/STIXCore/stixcore/config/data/common/elut/elut_table_20231019.csv 2026-02-12 18:19:57,898 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b7belv5z 2026-02-12 18:19:57,899 Read config from in: /tmp/ecc_context_ecc_cfg_1_b7belv5z/post_ecc.ini 2026-02-12 18:20:00,368 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b7belv5z/solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits 2026-02-12 18:43:25,306 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 18:43:31,669 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 18:43:31,676 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b7belv5z 2026-02-12 18:43:31,727 Soop found: SOOP 2026-02-12 18:43:32,022 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0f0i3tvu 2026-02-12 18:43:32,023 Read config from in: /tmp/ecc_context_ecc_cfg_1_0f0i3tvu/post_ecc.ini 2026-02-12 18:43:33,256 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0f0i3tvu/solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits 2026-02-12 19:06:45,772 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 19:06:51,861 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 19:06:51,870 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0f0i3tvu 2026-02-12 19:06:51,908 Soop found: SOOP 2026-02-12 19:06:52,181 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_je8uidxs 2026-02-12 19:06:52,183 Read config from in: /tmp/ecc_context_ecc_cfg_1_je8uidxs/post_ecc.ini 2026-02-12 19:06:53,420 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_je8uidxs/solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits 2026-02-12 19:29:40,052 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 19:29:45,924 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 19:29:45,934 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_je8uidxs 2026-02-12 19:29:45,963 Soop found: SOOP 2026-02-12 19:29:45,963 Soop found: SOOP 2026-02-12 19:29:46,231 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ntj410a6 2026-02-12 19:29:46,232 Read config from in: /tmp/ecc_context_ecc_cfg_1_ntj410a6/post_ecc.ini 2026-02-12 19:29:47,457 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ntj410a6/solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits 2026-02-12 19:52:14,356 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 19:52:20,167 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 19:52:20,174 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ntj410a6 2026-02-12 19:52:20,210 Soop found: SOOP 2026-02-12 19:52:21,464 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u96qs4l0 2026-02-12 19:52:21,464 Read config from in: /tmp/ecc_context_ecc_cfg_1_u96qs4l0/post_ecc.ini 2026-02-12 19:52:22,679 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u96qs4l0/solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits 2026-02-12 20:15:28,147 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 20:15:34,097 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 20:15:34,104 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u96qs4l0 2026-02-12 20:15:34,130 Soop found: SOOP 2026-02-12 20:15:34,397 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d__2j8q0 2026-02-12 20:15:34,397 Read config from in: /tmp/ecc_context_ecc_cfg_1_d__2j8q0/post_ecc.ini 2026-02-12 20:15:35,625 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d__2j8q0/solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits 2026-02-12 20:38:26,057 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 20:38:31,900 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 20:38:31,907 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d__2j8q0 2026-02-12 20:38:31,939 Soop found: SOOP 2026-02-12 20:38:32,190 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_who4fnbx 2026-02-12 20:38:32,190 Read config from in: /tmp/ecc_context_ecc_cfg_1_who4fnbx/post_ecc.ini 2026-02-12 20:38:33,421 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_who4fnbx/solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits 2026-02-12 21:01:31,123 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 21:01:36,979 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 21:01:36,985 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_who4fnbx 2026-02-12 21:01:37,013 Soop found: SOOP 2026-02-12 21:01:37,013 Soop found: SOOP 2026-02-12 21:01:37,282 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lkoew_i2 2026-02-12 21:01:37,282 Read config from in: /tmp/ecc_context_ecc_cfg_1_lkoew_i2/post_ecc.ini 2026-02-12 21:01:38,523 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lkoew_i2/solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits 2026-02-12 21:24:43,731 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 21:24:50,508 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 21:24:50,514 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lkoew_i2 2026-02-12 21:24:50,549 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cf9803ru 2026-02-12 21:24:50,549 Read config from in: /tmp/ecc_context_ecc_cfg_1_cf9803ru/post_ecc.ini 2026-02-12 21:24:51,781 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cf9803ru/solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits 2026-02-12 21:47:29,661 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 21:47:35,600 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 21:47:35,606 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cf9803ru 2026-02-12 21:47:35,636 Soop found: SOOP 2026-02-12 21:47:35,764 Soop found: SOOP 2026-02-12 21:47:35,764 Soop found: SOOP 2026-02-12 21:47:36,014 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v4j19gj9 2026-02-12 21:47:36,014 Read config from in: /tmp/ecc_context_ecc_cfg_1_v4j19gj9/post_ecc.ini 2026-02-12 21:47:37,241 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v4j19gj9/solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits 2026-02-12 22:09:54,773 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 22:10:00,679 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 22:10:00,686 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v4j19gj9 2026-02-12 22:10:00,713 Soop found: SOOP 2026-02-12 22:10:00,971 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a38uzt4v 2026-02-12 22:10:00,971 Read config from in: /tmp/ecc_context_ecc_cfg_1_a38uzt4v/post_ecc.ini 2026-02-12 22:10:02,204 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a38uzt4v/solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits 2026-02-12 22:32:55,715 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 22:33:01,604 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 22:33:01,611 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a38uzt4v 2026-02-12 22:33:01,647 Soop found: SOOP 2026-02-12 22:33:01,902 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qnzjoa4f 2026-02-12 22:33:01,903 Read config from in: /tmp/ecc_context_ecc_cfg_1_qnzjoa4f/post_ecc.ini 2026-02-12 22:33:03,131 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qnzjoa4f/solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits 2026-02-12 22:56:07,446 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 22:56:14,329 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 22:56:14,335 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qnzjoa4f 2026-02-12 22:56:14,363 Soop found: SOOP 2026-02-12 22:56:14,611 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yazyr19p 2026-02-12 22:56:14,611 Read config from in: /tmp/ecc_context_ecc_cfg_1_yazyr19p/post_ecc.ini 2026-02-12 22:56:15,838 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yazyr19p/solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits 2026-02-12 23:18:35,336 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 23:18:41,231 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 23:18:41,237 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yazyr19p 2026-02-12 23:18:41,265 Soop found: SOOP 2026-02-12 23:18:41,515 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6lo9la5w 2026-02-12 23:18:41,516 Read config from in: /tmp/ecc_context_ecc_cfg_1_6lo9la5w/post_ecc.ini 2026-02-12 23:18:42,738 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6lo9la5w/solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits 2026-02-12 23:41:33,594 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-12 23:41:39,396 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-12 23:41:39,402 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6lo9la5w 2026-02-12 23:41:39,426 Soop found: SOOP 2026-02-12 23:41:39,673 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u7to1z6w 2026-02-12 23:41:39,674 Read config from in: /tmp/ecc_context_ecc_cfg_1_u7to1z6w/post_ecc.ini 2026-02-12 23:41:40,902 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u7to1z6w/solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits 2026-02-13 00:04:48,464 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 00:04:54,296 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 00:04:54,302 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u7to1z6w 2026-02-13 00:04:54,329 Soop found: SOOP 2026-02-13 00:04:54,574 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kdl6ws0z 2026-02-13 00:04:54,575 Read config from in: /tmp/ecc_context_ecc_cfg_1_kdl6ws0z/post_ecc.ini 2026-02-13 00:04:56,722 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kdl6ws0z/solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits 2026-02-13 00:27:22,470 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 00:27:28,309 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 00:27:28,315 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kdl6ws0z 2026-02-13 00:27:28,345 Soop found: SOOP 2026-02-13 00:27:28,593 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eqwh32no 2026-02-13 00:27:28,593 Read config from in: /tmp/ecc_context_ecc_cfg_1_eqwh32no/post_ecc.ini 2026-02-13 00:27:29,808 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eqwh32no/solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits 2026-02-13 00:50:22,573 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 00:50:28,382 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 00:50:28,389 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eqwh32no 2026-02-13 00:50:28,419 Soop found: SOOP 2026-02-13 00:50:28,666 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yjy0une3 2026-02-13 00:50:28,667 Read config from in: /tmp/ecc_context_ecc_cfg_1_yjy0une3/post_ecc.ini 2026-02-13 00:50:29,896 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yjy0une3/solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits 2026-02-13 01:12:45,263 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 01:12:51,190 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 01:12:51,196 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yjy0une3 2026-02-13 01:12:51,226 Soop found: SOOP 2026-02-13 01:12:51,476 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pgmta07f 2026-02-13 01:12:51,476 Read config from in: /tmp/ecc_context_ecc_cfg_1_pgmta07f/post_ecc.ini 2026-02-13 01:12:52,719 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pgmta07f/solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits 2026-02-13 01:35:25,913 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 01:35:32,886 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 01:35:32,892 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pgmta07f 2026-02-13 01:35:32,919 Soop found: SOOP 2026-02-13 01:35:33,164 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fnetein7 2026-02-13 01:35:33,164 Read config from in: /tmp/ecc_context_ecc_cfg_1_fnetein7/post_ecc.ini 2026-02-13 01:35:34,389 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fnetein7/solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits 2026-02-13 01:57:58,274 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 01:58:04,252 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 01:58:04,258 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fnetein7 2026-02-13 01:58:04,282 Soop found: SOOP 2026-02-13 01:58:04,531 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__hlyess7 2026-02-13 01:58:04,531 Read config from in: /tmp/ecc_context_ecc_cfg_1__hlyess7/post_ecc.ini 2026-02-13 01:58:05,764 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__hlyess7/solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits 2026-02-13 02:20:46,740 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 02:20:52,631 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 02:20:52,640 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__hlyess7 2026-02-13 02:20:52,680 Soop found: SOOP 2026-02-13 02:20:52,947 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k4apbn8e 2026-02-13 02:20:52,948 Read config from in: /tmp/ecc_context_ecc_cfg_1_k4apbn8e/post_ecc.ini 2026-02-13 02:20:54,178 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k4apbn8e/solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits 2026-02-13 02:43:19,132 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 02:43:24,933 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 02:43:24,940 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k4apbn8e 2026-02-13 02:43:24,972 Soop found: SOOP 2026-02-13 02:43:25,225 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3uonay7_ 2026-02-13 02:43:25,225 Read config from in: /tmp/ecc_context_ecc_cfg_1_3uonay7_/post_ecc.ini 2026-02-13 02:43:26,449 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3uonay7_/solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits 2026-02-13 03:05:51,546 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 03:05:58,332 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 03:05:58,341 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3uonay7_ 2026-02-13 03:05:58,371 Soop found: SOOP 2026-02-13 03:05:58,615 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7dt7pdkp 2026-02-13 03:05:58,615 Read config from in: /tmp/ecc_context_ecc_cfg_1_7dt7pdkp/post_ecc.ini 2026-02-13 03:05:59,836 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7dt7pdkp/solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits 2026-02-13 03:28:20,386 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 03:28:26,149 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-02-13 03:28:26,150 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-02-13 03:28:26,156 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7dt7pdkp 2026-02-13 03:28:26,186 Soop found: SOOP 2026-02-13 03:28:26,186 Soop found: SOOP 2026-02-13 03:28:26,434 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8zxt53iz 2026-02-13 03:28:26,435 Read config from in: /tmp/ecc_context_ecc_cfg_1_8zxt53iz/post_ecc.ini 2026-02-13 03:28:27,665 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8zxt53iz/solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits 2026-02-13 03:51:16,480 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 03:51:22,334 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 03:51:22,341 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8zxt53iz 2026-02-13 03:51:22,370 Soop found: SOOP 2026-02-13 03:51:22,631 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7g1qekf2 2026-02-13 03:51:22,632 Read config from in: /tmp/ecc_context_ecc_cfg_1_7g1qekf2/post_ecc.ini 2026-02-13 03:51:23,872 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7g1qekf2/solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits 2026-02-13 04:14:17,898 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 04:14:23,858 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 04:14:23,864 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7g1qekf2 2026-02-13 04:14:23,896 Soop found: SOOP 2026-02-13 04:14:24,144 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ez5478nn 2026-02-13 04:14:24,145 Read config from in: /tmp/ecc_context_ecc_cfg_1_ez5478nn/post_ecc.ini 2026-02-13 04:14:26,415 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ez5478nn/solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits 2026-02-13 04:37:10,736 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 04:37:16,514 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 04:37:16,519 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ez5478nn 2026-02-13 04:37:16,548 Soop found: SOOP 2026-02-13 04:37:16,798 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9pjmhdrn 2026-02-13 04:37:16,798 Read config from in: /tmp/ecc_context_ecc_cfg_1_9pjmhdrn/post_ecc.ini 2026-02-13 04:37:18,021 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9pjmhdrn/solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits 2026-02-13 04:59:46,646 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 04:59:52,431 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 04:59:52,439 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9pjmhdrn 2026-02-13 04:59:52,468 Soop found: SOOP 2026-02-13 04:59:52,468 Soop found: SOOP 2026-02-13 04:59:52,708 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e6f4x36i 2026-02-13 04:59:52,709 Read config from in: /tmp/ecc_context_ecc_cfg_1_e6f4x36i/post_ecc.ini 2026-02-13 04:59:53,927 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e6f4x36i/solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits 2026-02-13 05:22:41,932 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 05:22:47,752 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 05:22:47,759 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e6f4x36i 2026-02-13 05:22:47,787 Soop found: SOOP 2026-02-13 05:22:48,031 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vl9jk_sg 2026-02-13 05:22:48,032 Read config from in: /tmp/ecc_context_ecc_cfg_1_vl9jk_sg/post_ecc.ini 2026-02-13 05:22:49,268 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vl9jk_sg/solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits 2026-02-13 05:45:46,227 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 05:45:52,050 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 05:45:52,056 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vl9jk_sg 2026-02-13 05:45:52,085 Soop found: SOOP 2026-02-13 05:45:52,335 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_59wtolc1 2026-02-13 05:45:52,335 Read config from in: /tmp/ecc_context_ecc_cfg_1_59wtolc1/post_ecc.ini 2026-02-13 05:45:54,548 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_59wtolc1/solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits 2026-02-13 06:11:09,364 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 06:11:15,209 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 06:11:15,216 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_59wtolc1 2026-02-13 06:11:15,259 Soop found: SOOP 2026-02-13 06:11:15,535 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yiu8zuxx 2026-02-13 06:11:15,535 Read config from in: /tmp/ecc_context_ecc_cfg_1_yiu8zuxx/post_ecc.ini 2026-02-13 06:11:16,753 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yiu8zuxx/solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits 2026-02-13 06:34:15,496 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-13 06:34:22,063 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-13 06:34:22,069 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yiu8zuxx 2026-02-13 06:34:22,103 Soop found: SOOP 2026-02-18 14:10:56,413 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-02-18 14:10:57,742 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260213_003.tm 2026-02-18 14:10:58,053 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260217_001.tm 2026-02-18 14:10:58,053 Create SOCManager @ /data/stix/out/fits_utest/tm/processing 2026-02-18 14:10:58,060 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-02-18 14:10:58,121 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-18 14:10:58,122 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-02-18 14:10:58,123 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-18 14:10:58,123 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-02-18 14:10:58,124 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-02-18 14:10:58,125 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-02-18 14:10:58,126 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-02-18 14:10:58,126 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-02-18 14:10:58,127 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-02-18 14:10:58,128 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-02-18 14:10:58,129 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-02-18 14:10:58,129 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-02-18 14:10:58,130 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-02-18 14:10:58,131 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-02-18 14:10:58,132 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-02-18 14:10:58,132 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-02-18 14:10:58,134 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-02-18 14:10:58,134 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-02-18 14:10:58,135 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-02-18 14:10:58,135 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-02-18 14:10:58,136 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-02-18 14:10:58,136 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-02-18 14:10:58,137 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-02-18 14:10:58,138 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-02-18 14:10:58,139 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-02-18 14:10:58,139 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-02-18 14:10:58,140 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-02-18 14:10:58,140 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-02-18 14:10:58,141 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-02-18 14:10:58,141 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-02-18 14:10:58,142 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-02-18 14:10:58,142 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-02-18 14:10:58,143 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-02-18 14:10:58,143 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-02-18 14:10:58,144 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-02-18 14:10:58,145 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-02-18 14:10:58,146 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-02-18 14:10:58,146 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-02-18 14:10:58,147 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-02-18 14:10:58,147 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-02-18 14:10:58,148 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-02-18 14:10:58,149 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-02-18 14:10:58,150 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-02-18 14:10:58,150 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-02-18 14:10:58,151 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-02-18 14:10:58,151 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-02-18 14:10:58,152 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-02-18 14:10:58,152 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-02-18 14:10:58,152 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-02-18 14:10:58,153 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-02-18 14:10:58,153 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-02-18 14:10:58,153 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-02-18 14:10:58,154 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-02-18 14:10:58,155 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-02-18 14:10:58,155 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-02-18 14:10:58,155 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-02-18 14:10:58,156 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-02-18 14:10:58,156 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-02-18 14:10:58,157 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-02-18 14:10:58,157 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-02-18 14:10:58,158 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-02-18 14:10:58,158 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-02-18 14:10:58,159 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-18 14:10:58,159 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-02-18 14:10:58,160 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-02-18 14:10:58,161 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-02-18 14:10:58,162 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-02-18 14:10:58,162 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-02-18 14:10:58,163 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-02-18 14:10:58,164 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-02-18 14:10:58,165 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-02-18 14:10:58,165 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-02-18 14:10:58,166 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-02-18 14:10:58,166 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-02-18 14:10:58,166 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-02-18 14:10:58,166 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-02-18 14:10:58,167 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-02-18 14:10:58,167 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-02-18 14:10:58,167 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-02-18 14:10:58,167 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-02-18 14:10:58,168 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-02-18 14:10:58,168 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-02-18 14:10:58,168 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-02-18 14:10:58,168 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-02-18 14:10:58,169 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-02-18 14:10:58,169 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-02-18 14:10:58,169 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-02-18 14:10:58,169 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-02-18 14:10:58,169 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-02-18 14:10:58,449 SOOP Rebuild Index: soops: 547observations 1191 2026-02-18 14:11:08,962 PIPELINE VERSION Version: 1.6.3.dev2+gc741a0222 Common instrument config version: v0.1.5 PROCESSING VERSIONS Prod: Ephemeris File: /home/nicky/STIXCore/stixcore/products/ANC/aspect.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/CAL/energy.py Vers: 4 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/nicky/STIXCore/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-02-18 14:11:08,963 CONFIG [Paths] tm_archive = /data/stix/out/fits_utest/tm/processing fits_archive = /data/stix/out/test/p311_comp_test/ spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12389 parallel_batchsize_l0 = 300 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = DEBUG log_dir = /data/stix/out/fits_utest/tm/logging error_mail_send = False error_mail_receivers = nicky.hochmuth@ateleris.ch error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch start_with_unprocessed = False last_processed = TM_BatchRequest.PktTmRaw.SOL.0.2023.305.15.33.13.852.bBWz@2023.352.21.00.01.039.1.xml.out [Publish] db_file = /home/nicky/soar_pub/published.sqlite include_levels = LL03 waiting_period = 0d target_dir = /home/nicky/soar_pub/to_soc report_mail_receivers = nicky.hochmuth@ateleris.ch report_mail_send = True same_esa_name_dir = /home/nicky/soar_pub/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/test/esa_release_test3/ ll_waiting_period = 0d supplement_report = /home/nicky/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal log_dir = /data/stix/out/fits_utest/tm/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop update_by_api = True [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-02-18 14:11:08,963 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 52588 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260213_003.tm'), 'pred', datetime.datetime(2026, 2, 13, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260217_001.tm'), 'flown', datetime.datetime(2026, 2, 17, 0, 0))] IDBManager: /home/nicky/STIXCore/stixcore/data/idb Versions: [{'label': '2.26.37', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.37', 'version': ['2', '26', '37']}, {'label': '2.26.36', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-02-18 14:11:09,925 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260213_003.tm 2026-02-18 14:11:10,201 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260217_001.tm 2026-02-18 14:11:10,202 Loaded 1 ECC configurations from index 2026-02-18 14:11:10,395 Successfully read ELUT file: /home/nicky/STIXCore/stixcore/config/data/common/elut/elut_table_20231019.csv 2026-02-18 14:11:10,434 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4umq7fov 2026-02-18 14:11:10,435 Read config from in: /tmp/ecc_context_ecc_cfg_1_4umq7fov/post_ecc.ini 2026-02-18 14:11:12,986 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4umq7fov/solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits 2026-02-18 14:34:20,731 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 14:34:26,667 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 14:34:26,677 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4umq7fov 2026-02-18 14:34:26,716 Soop found: SOOP 2026-02-18 14:34:26,830 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/30/CAL/solo_CAL_stix-cal-energy_20240129T233948-20240130T233947_V04.fits 2026-02-18 14:34:26,988 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xj041lpw 2026-02-18 14:34:26,988 Read config from in: /tmp/ecc_context_ecc_cfg_1_xj041lpw/post_ecc.ini 2026-02-18 14:34:28,219 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xj041lpw/solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits 2026-02-18 14:57:00,127 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 14:57:06,149 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 14:57:06,159 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xj041lpw 2026-02-18 14:57:06,189 Soop found: SOOP 2026-02-18 14:57:06,297 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/10/CAL/solo_CAL_stix-cal-energy_20240110T002212-20240111T002617_V04.fits 2026-02-18 14:57:06,464 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y70s44gn 2026-02-18 14:57:06,464 Read config from in: /tmp/ecc_context_ecc_cfg_1_y70s44gn/post_ecc.ini 2026-02-18 14:57:07,773 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y70s44gn/solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits 2026-02-18 15:19:47,283 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 15:19:53,215 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 15:19:53,221 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y70s44gn 2026-02-18 15:19:53,250 Soop found: SOOP 2026-02-18 15:19:53,250 Soop found: SOOP 2026-02-18 15:19:53,352 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/01/CAL/solo_CAL_stix-cal-energy_20231231T132352-20240101T132352_V04.fits 2026-02-18 15:19:53,513 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nz9c7zqe 2026-02-18 15:19:53,513 Read config from in: /tmp/ecc_context_ecc_cfg_1_nz9c7zqe/post_ecc.ini 2026-02-18 15:19:54,740 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nz9c7zqe/solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits 2026-02-18 15:42:22,448 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 15:42:29,487 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 15:42:29,494 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nz9c7zqe 2026-02-18 15:42:29,518 Soop found: SOOP 2026-02-18 15:42:29,616 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/24/CAL/solo_CAL_stix-cal-energy_20240123T225920-20240124T225921_V04.fits 2026-02-18 15:42:30,025 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_enyumwvk 2026-02-18 15:42:30,025 Read config from in: /tmp/ecc_context_ecc_cfg_1_enyumwvk/post_ecc.ini 2026-02-18 15:42:31,263 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_enyumwvk/solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits 2026-02-18 16:05:32,590 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 16:05:38,479 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 16:05:38,487 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_enyumwvk 2026-02-18 16:05:38,513 Soop found: SOOP 2026-02-18 16:05:38,609 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/08/CAL/solo_CAL_stix-cal-energy_20240108T002201-20240109T002200_V04.fits 2026-02-18 16:05:38,774 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z0dfeya8 2026-02-18 16:05:38,774 Read config from in: /tmp/ecc_context_ecc_cfg_1_z0dfeya8/post_ecc.ini 2026-02-18 16:05:40,007 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z0dfeya8/solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits 2026-02-18 16:28:31,768 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 16:28:37,684 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 16:28:37,691 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z0dfeya8 2026-02-18 16:28:37,717 Soop found: SOOP 2026-02-18 16:28:37,811 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/05/CAL/solo_CAL_stix-cal-energy_20240104T132415-20240105T132416_V04.fits 2026-02-18 16:28:37,969 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nftyo0h9 2026-02-18 16:28:37,969 Read config from in: /tmp/ecc_context_ecc_cfg_1_nftyo0h9/post_ecc.ini 2026-02-18 16:28:39,186 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nftyo0h9/solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits 2026-02-18 16:51:33,912 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 16:51:39,869 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 16:51:39,876 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nftyo0h9 2026-02-18 16:51:39,903 Soop found: SOOP 2026-02-18 16:51:39,904 Soop found: SOOP 2026-02-18 16:51:39,998 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/14/CAL/solo_CAL_stix-cal-energy_20240114T005658-20240115T005657_V04.fits 2026-02-18 16:51:40,169 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8m15lljm 2026-02-18 16:51:40,169 Read config from in: /tmp/ecc_context_ecc_cfg_1_8m15lljm/post_ecc.ini 2026-02-18 16:51:41,397 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8m15lljm/solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits 2026-02-18 17:14:44,398 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 17:14:51,329 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 17:14:51,335 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8m15lljm 2026-02-18 17:14:51,367 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_paebkylm 2026-02-18 17:14:51,367 Read config from in: /tmp/ecc_context_ecc_cfg_1_paebkylm/post_ecc.ini 2026-02-18 17:14:52,606 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_paebkylm/solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits 2026-02-18 17:37:23,234 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 17:37:29,225 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 17:37:29,232 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_paebkylm 2026-02-18 17:37:29,259 Soop found: SOOP 2026-02-18 17:37:29,360 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/07/CAL/solo_CAL_stix-cal-energy_20240106T132428-20240107T132428_V04.fits 2026-02-18 17:37:29,396 Soop found: SOOP 2026-02-18 17:37:29,396 Soop found: SOOP 2026-02-18 17:37:29,488 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/07/CAL/solo_CAL_stix-cal-energy_20240107T132434-20240108T000002_V04.fits 2026-02-18 17:37:29,651 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kh3qcpup 2026-02-18 17:37:29,651 Read config from in: /tmp/ecc_context_ecc_cfg_1_kh3qcpup/post_ecc.ini 2026-02-18 17:37:30,889 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kh3qcpup/solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits 2026-02-18 18:03:28,466 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-02-18 18:03:29,766 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260213_003.tm 2026-02-18 18:03:30,050 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260218_001.tm 2026-02-18 18:03:30,051 Create SOCManager @ /data/stix/out/fits_utest/tm/processing 2026-02-18 18:03:30,058 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-02-18 18:03:30,109 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-18 18:03:30,109 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-02-18 18:03:30,110 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-18 18:03:30,110 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-02-18 18:03:30,112 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-02-18 18:03:30,112 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-02-18 18:03:30,113 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-02-18 18:03:30,113 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-02-18 18:03:30,115 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-02-18 18:03:30,115 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-02-18 18:03:30,116 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-02-18 18:03:30,116 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-02-18 18:03:30,117 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-02-18 18:03:30,118 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-02-18 18:03:30,119 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-02-18 18:03:30,119 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-02-18 18:03:30,120 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-02-18 18:03:30,121 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-02-18 18:03:30,122 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-02-18 18:03:30,122 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-02-18 18:03:30,123 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-02-18 18:03:30,123 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-02-18 18:03:30,124 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-02-18 18:03:30,124 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-02-18 18:03:30,125 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-02-18 18:03:30,126 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-02-18 18:03:30,126 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-02-18 18:03:30,126 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-02-18 18:03:30,127 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-02-18 18:03:30,127 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-02-18 18:03:30,128 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-02-18 18:03:30,129 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-02-18 18:03:30,129 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-02-18 18:03:30,130 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-02-18 18:03:30,131 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-02-18 18:03:30,131 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-02-18 18:03:30,132 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-02-18 18:03:30,132 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-02-18 18:03:30,133 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-02-18 18:03:30,133 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-02-18 18:03:30,134 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-02-18 18:03:30,135 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-02-18 18:03:30,135 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-02-18 18:03:30,135 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-02-18 18:03:30,137 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-02-18 18:03:30,137 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-02-18 18:03:30,137 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-02-18 18:03:30,137 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-02-18 18:03:30,138 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-02-18 18:03:30,138 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-02-18 18:03:30,139 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-02-18 18:03:30,139 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-02-18 18:03:30,140 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-02-18 18:03:30,140 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-02-18 18:03:30,141 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-02-18 18:03:30,141 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-02-18 18:03:30,142 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-02-18 18:03:30,142 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-02-18 18:03:30,142 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-02-18 18:03:30,142 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-02-18 18:03:30,143 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-02-18 18:03:30,143 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-02-18 18:03:30,144 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-02-18 18:03:30,145 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-02-18 18:03:30,145 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-02-18 18:03:30,146 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-02-18 18:03:30,147 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-02-18 18:03:30,147 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-02-18 18:03:30,148 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-02-18 18:03:30,149 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-02-18 18:03:30,150 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-02-18 18:03:30,150 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-02-18 18:03:30,151 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-02-18 18:03:30,151 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-02-18 18:03:30,151 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-02-18 18:03:30,151 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-02-18 18:03:30,152 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-02-18 18:03:30,152 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-02-18 18:03:30,152 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-02-18 18:03:30,152 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-02-18 18:03:30,152 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-02-18 18:03:30,153 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-02-18 18:03:30,153 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-02-18 18:03:30,153 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-02-18 18:03:30,153 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-02-18 18:03:30,153 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-02-18 18:03:30,153 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-02-18 18:03:30,154 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-02-18 18:03:30,154 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-02-18 18:03:30,422 SOOP Rebuild Index: soops: 547observations 1191 2026-02-18 18:03:39,829 PIPELINE VERSION Version: 1.6.3.dev2+gc741a0222 Common instrument config version: v0.1.5 PROCESSING VERSIONS Prod: Ephemeris File: /home/nicky/STIXCore/stixcore/products/ANC/aspect.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/CAL/energy.py Vers: 4 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/nicky/STIXCore/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-02-18 18:03:39,830 CONFIG [Paths] tm_archive = /data/stix/out/fits_utest/tm/processing fits_archive = /data/stix/out/test/p311_comp_test/ spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12389 parallel_batchsize_l0 = 300 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = DEBUG log_dir = /data/stix/out/fits_utest/tm/logging error_mail_send = False error_mail_receivers = nicky.hochmuth@ateleris.ch error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch start_with_unprocessed = False last_processed = TM_BatchRequest.PktTmRaw.SOL.0.2023.305.15.33.13.852.bBWz@2023.352.21.00.01.039.1.xml.out [Publish] db_file = /home/nicky/soar_pub/published.sqlite include_levels = LL03 waiting_period = 0d target_dir = /home/nicky/soar_pub/to_soc report_mail_receivers = nicky.hochmuth@ateleris.ch report_mail_send = True same_esa_name_dir = /home/nicky/soar_pub/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/test/esa_release_test3/ ll_waiting_period = 0d supplement_report = /home/nicky/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal log_dir = /data/stix/out/fits_utest/tm/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop update_by_api = True [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-02-18 18:03:39,830 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 52588 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260213_003.tm'), 'pred', datetime.datetime(2026, 2, 13, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260218_001.tm'), 'flown', datetime.datetime(2026, 2, 18, 0, 0))] IDBManager: /home/nicky/STIXCore/stixcore/data/idb Versions: [{'label': '2.26.37', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.37', 'version': ['2', '26', '37']}, {'label': '2.26.36', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-02-18 18:03:40,750 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260213_003.tm 2026-02-18 18:03:41,025 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260218_001.tm 2026-02-18 18:03:41,026 Loaded 1 ECC configurations from index 2026-02-18 18:03:41,193 Successfully read ELUT file: /home/nicky/STIXCore/stixcore/config/data/common/elut/elut_table_20231019.csv 2026-02-18 18:03:41,229 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ngdxqj56 2026-02-18 18:03:41,230 Read config from in: /tmp/ecc_context_ecc_cfg_1_ngdxqj56/post_ecc.ini 2026-02-18 18:03:43,573 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ngdxqj56/solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits 2026-02-18 18:26:39,199 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 18:26:45,418 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 18:26:45,426 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ngdxqj56 2026-02-18 18:26:45,466 Soop found: SOOP 2026-02-18 18:26:45,574 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/30/CAL/solo_CAL_stix-cal-energy_20240129T233948-20240130T233947_V04.fits 2026-02-18 18:26:45,722 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ckk0ogzv 2026-02-18 18:26:45,723 Read config from in: /tmp/ecc_context_ecc_cfg_1_ckk0ogzv/post_ecc.ini 2026-02-18 18:26:46,957 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ckk0ogzv/solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits 2026-02-18 18:49:17,033 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 18:49:22,970 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 18:49:22,977 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ckk0ogzv 2026-02-18 18:49:23,006 Soop found: SOOP 2026-02-18 18:49:23,103 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/10/CAL/solo_CAL_stix-cal-energy_20240110T002212-20240111T002617_V04.fits 2026-02-18 18:49:23,245 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1nc6guij 2026-02-18 18:49:23,245 Read config from in: /tmp/ecc_context_ecc_cfg_1_1nc6guij/post_ecc.ini 2026-02-18 18:49:24,483 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1nc6guij/solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits 2026-02-18 19:12:00,592 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 19:12:06,522 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 19:12:06,529 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1nc6guij 2026-02-18 19:12:06,556 Soop found: SOOP 2026-02-18 19:12:06,556 Soop found: SOOP 2026-02-18 19:12:06,651 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/01/CAL/solo_CAL_stix-cal-energy_20231231T132352-20240101T132352_V04.fits 2026-02-18 19:12:06,792 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h354tv44 2026-02-18 19:12:06,793 Read config from in: /tmp/ecc_context_ecc_cfg_1_h354tv44/post_ecc.ini 2026-02-18 19:12:08,015 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h354tv44/solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits 2026-02-18 19:34:29,547 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 19:34:36,502 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 19:34:36,508 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h354tv44 2026-02-18 19:34:36,531 Soop found: SOOP 2026-02-18 19:34:36,624 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/24/CAL/solo_CAL_stix-cal-energy_20240123T225920-20240124T225921_V04.fits 2026-02-18 19:34:36,762 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dtm9wd_i 2026-02-18 19:34:36,762 Read config from in: /tmp/ecc_context_ecc_cfg_1_dtm9wd_i/post_ecc.ini 2026-02-18 19:34:37,985 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dtm9wd_i/solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits 2026-02-18 19:57:27,958 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 19:57:33,943 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 19:57:33,950 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dtm9wd_i 2026-02-18 19:57:33,976 Soop found: SOOP 2026-02-18 19:57:34,072 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/08/CAL/solo_CAL_stix-cal-energy_20240108T002201-20240109T002200_V04.fits 2026-02-18 19:57:34,215 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pzcz84ir 2026-02-18 19:57:34,216 Read config from in: /tmp/ecc_context_ecc_cfg_1_pzcz84ir/post_ecc.ini 2026-02-18 19:57:35,447 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pzcz84ir/solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits 2026-02-18 20:20:19,231 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 20:20:25,185 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 20:20:25,192 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pzcz84ir 2026-02-18 20:20:25,217 Soop found: SOOP 2026-02-18 20:20:25,310 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/05/CAL/solo_CAL_stix-cal-energy_20240104T132415-20240105T132416_V04.fits 2026-02-18 20:20:25,448 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m6wk3inp 2026-02-18 20:20:25,448 Read config from in: /tmp/ecc_context_ecc_cfg_1_m6wk3inp/post_ecc.ini 2026-02-18 20:20:26,656 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m6wk3inp/solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits 2026-02-18 20:43:19,089 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 20:43:24,985 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 20:43:24,992 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m6wk3inp 2026-02-18 20:43:25,018 Soop found: SOOP 2026-02-18 20:43:25,018 Soop found: SOOP 2026-02-18 20:43:25,112 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/14/CAL/solo_CAL_stix-cal-energy_20240114T005658-20240115T005657_V04.fits 2026-02-18 20:43:25,258 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_niymyl5p 2026-02-18 20:43:25,259 Read config from in: /tmp/ecc_context_ecc_cfg_1_niymyl5p/post_ecc.ini 2026-02-18 20:43:26,484 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_niymyl5p/solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits 2026-02-18 21:06:19,227 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 21:06:26,103 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 21:06:26,110 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_niymyl5p 2026-02-18 21:06:26,145 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ve0vj8mp 2026-02-18 21:06:26,146 Read config from in: /tmp/ecc_context_ecc_cfg_1_ve0vj8mp/post_ecc.ini 2026-02-18 21:06:27,379 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ve0vj8mp/solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits 2026-02-18 21:28:57,344 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 21:29:03,380 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 21:29:03,386 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ve0vj8mp 2026-02-18 21:29:03,411 Soop found: SOOP 2026-02-18 21:29:03,508 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/07/CAL/solo_CAL_stix-cal-energy_20240106T132428-20240107T132428_V04.fits 2026-02-18 21:29:03,545 Soop found: SOOP 2026-02-18 21:29:03,545 Soop found: SOOP 2026-02-18 21:29:03,637 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/07/CAL/solo_CAL_stix-cal-energy_20240107T132434-20240108T000002_V04.fits 2026-02-18 21:29:03,781 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oq2z2br6 2026-02-18 21:29:03,782 Read config from in: /tmp/ecc_context_ecc_cfg_1_oq2z2br6/post_ecc.ini 2026-02-18 21:29:05,002 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oq2z2br6/solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits 2026-02-18 21:51:21,602 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 21:51:27,520 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 21:51:27,527 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oq2z2br6 2026-02-18 21:51:27,553 Soop found: SOOP 2026-02-18 21:51:27,652 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/20/CAL/solo_CAL_stix-cal-energy_20240119T213613-20240120T213612_V04.fits 2026-02-18 21:51:27,811 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8wywy6lo 2026-02-18 21:51:27,812 Read config from in: /tmp/ecc_context_ecc_cfg_1_8wywy6lo/post_ecc.ini 2026-02-18 21:51:29,026 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8wywy6lo/solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits 2026-02-18 22:14:02,235 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240106_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 22:14:08,131 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 22:14:08,137 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8wywy6lo 2026-02-18 22:14:08,163 Soop found: SOOP 2026-02-18 22:14:08,258 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/06/CAL/solo_CAL_stix-cal-energy_20240105T132422-20240106T132422_V04.fits 2026-02-18 22:14:08,418 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eh8e6cgx 2026-02-18 22:14:08,418 Read config from in: /tmp/ecc_context_ecc_cfg_1_eh8e6cgx/post_ecc.ini 2026-02-18 22:14:10,581 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eh8e6cgx/solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits 2026-02-18 22:36:48,538 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240103_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 22:36:54,516 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 22:36:54,523 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eh8e6cgx 2026-02-18 22:36:54,548 Soop found: SOOP 2026-02-18 22:36:54,641 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/03/CAL/solo_CAL_stix-cal-energy_20240102T132404-20240103T132404_V04.fits 2026-02-18 22:36:54,806 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gi7v37sf 2026-02-18 22:36:54,807 Read config from in: /tmp/ecc_context_ecc_cfg_1_gi7v37sf/post_ecc.ini 2026-02-18 22:36:56,051 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gi7v37sf/solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits 2026-02-18 22:59:19,254 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240117_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 22:59:25,909 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 22:59:25,916 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gi7v37sf 2026-02-18 22:59:25,945 Soop found: SOOP 2026-02-18 22:59:26,050 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/17/CAL/solo_CAL_stix-cal-energy_20240117T005715-20240117T145002_V04.fits 2026-02-18 22:59:26,215 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mgk4b3gu 2026-02-18 22:59:26,216 Read config from in: /tmp/ecc_context_ecc_cfg_1_mgk4b3gu/post_ecc.ini 2026-02-18 22:59:27,457 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mgk4b3gu/solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits 2026-02-18 23:22:08,945 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240131_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 23:22:14,827 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 23:22:14,833 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mgk4b3gu 2026-02-18 23:22:14,859 Soop found: SOOP 2026-02-18 23:22:14,960 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/31/CAL/solo_CAL_stix-cal-energy_20240130T233953-20240131T233954_V04.fits 2026-02-18 23:22:15,116 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ie3yjr71 2026-02-18 23:22:15,116 Read config from in: /tmp/ecc_context_ecc_cfg_1_ie3yjr71/post_ecc.ini 2026-02-18 23:22:16,331 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ie3yjr71/solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits 2026-02-18 23:45:09,601 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240118_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-18 23:45:15,478 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-18 23:45:15,485 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ie3yjr71 2026-02-18 23:45:15,510 Soop found: SOOP 2026-02-18 23:45:15,604 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/18/CAL/solo_CAL_stix-cal-energy_20240117T213600-20240118T213601_V04.fits 2026-02-18 23:45:16,684 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pvaefr9c 2026-02-18 23:45:16,685 Read config from in: /tmp/ecc_context_ecc_cfg_1_pvaefr9c/post_ecc.ini 2026-02-18 23:45:17,896 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pvaefr9c/solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits 2026-02-19 00:07:58,093 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 00:08:04,044 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 00:08:04,050 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pvaefr9c 2026-02-19 00:08:04,075 Soop found: SOOP 2026-02-19 00:08:04,182 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/23/CAL/solo_CAL_stix-cal-energy_20240122T225915-20240123T225914_V04.fits 2026-02-19 00:08:04,339 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wgpd8iht 2026-02-19 00:08:04,339 Read config from in: /tmp/ecc_context_ecc_cfg_1_wgpd8iht/post_ecc.ini 2026-02-19 00:08:05,586 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wgpd8iht/solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits 2026-02-19 00:30:50,389 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 00:30:56,272 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 00:30:56,278 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wgpd8iht 2026-02-19 00:30:56,305 Soop found: SOOP 2026-02-19 00:30:56,399 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/16/CAL/solo_CAL_stix-cal-energy_20240116T005709-20240117T005708_V04.fits 2026-02-19 00:30:56,557 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m2sf_0nt 2026-02-19 00:30:56,557 Read config from in: /tmp/ecc_context_ecc_cfg_1_m2sf_0nt/post_ecc.ini 2026-02-19 00:30:57,784 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m2sf_0nt/solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits 2026-02-19 00:53:08,056 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 00:53:13,899 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 00:53:13,906 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m2sf_0nt 2026-02-19 00:53:13,933 Soop found: SOOP 2026-02-19 00:53:14,027 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/21/CAL/solo_CAL_stix-cal-energy_20240120T213619-20240121T213618_V04.fits 2026-02-19 00:53:14,182 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d6wyhatu 2026-02-19 00:53:14,183 Read config from in: /tmp/ecc_context_ecc_cfg_1_d6wyhatu/post_ecc.ini 2026-02-19 00:53:15,400 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d6wyhatu/solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits 2026-02-19 01:15:51,317 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240112_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 01:15:58,155 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 01:15:58,161 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d6wyhatu 2026-02-19 01:15:58,184 Soop found: SOOP 2026-02-19 01:15:58,276 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/12/CAL/solo_CAL_stix-cal-energy_20240112T003411-20240113T003452_V04.fits 2026-02-19 01:15:58,435 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kg6vgvd3 2026-02-19 01:15:58,435 Read config from in: /tmp/ecc_context_ecc_cfg_1_kg6vgvd3/post_ecc.ini 2026-02-19 01:15:59,650 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kg6vgvd3/solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits 2026-02-19 01:38:27,663 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240127_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 01:38:33,544 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 01:38:33,551 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kg6vgvd3 2026-02-19 01:38:33,576 Soop found: SOOP 2026-02-19 01:38:33,674 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/27/CAL/solo_CAL_stix-cal-energy_20240126T225938-20240127T225938_V04.fits 2026-02-19 01:38:33,832 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hyokzg9v 2026-02-19 01:38:33,832 Read config from in: /tmp/ecc_context_ecc_cfg_1_hyokzg9v/post_ecc.ini 2026-02-19 01:38:35,047 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hyokzg9v/solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits 2026-02-19 02:01:11,283 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240111_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 02:01:17,125 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 02:01:17,131 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hyokzg9v 2026-02-19 02:01:17,157 Soop found: SOOP 2026-02-19 02:01:17,250 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/11/CAL/solo_CAL_stix-cal-energy_20240111T003404-20240112T003405_V04.fits 2026-02-19 02:01:17,408 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o0vc72ke 2026-02-19 02:01:17,409 Read config from in: /tmp/ecc_context_ecc_cfg_1_o0vc72ke/post_ecc.ini 2026-02-19 02:01:18,625 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o0vc72ke/solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits 2026-02-19 02:23:52,714 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240126_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 02:23:58,600 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 02:23:58,607 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o0vc72ke 2026-02-19 02:23:58,634 Soop found: SOOP 2026-02-19 02:23:58,734 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/26/CAL/solo_CAL_stix-cal-energy_20240125T225933-20240126T225932_V04.fits 2026-02-19 02:23:58,891 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2frzm0x4 2026-02-19 02:23:58,891 Read config from in: /tmp/ecc_context_ecc_cfg_1_2frzm0x4/post_ecc.ini 2026-02-19 02:24:01,066 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2frzm0x4/solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits 2026-02-19 02:46:09,757 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240119_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 02:46:15,653 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 02:46:15,659 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2frzm0x4 2026-02-19 02:46:15,684 Soop found: SOOP 2026-02-19 02:46:15,779 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/19/CAL/solo_CAL_stix-cal-energy_20240118T213607-20240119T213606_V04.fits 2026-02-19 02:46:16,165 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ykqv3vn4 2026-02-19 02:46:16,166 Read config from in: /tmp/ecc_context_ecc_cfg_1_ykqv3vn4/post_ecc.ini 2026-02-19 02:46:17,382 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ykqv3vn4/solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits 2026-02-19 03:08:42,648 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 03:08:48,484 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-02-19 03:08:48,486 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-02-19 03:08:48,492 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ykqv3vn4 2026-02-19 03:08:48,516 Soop found: SOOP 2026-02-19 03:08:48,516 Soop found: SOOP 2026-02-19 03:08:48,613 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/22/CAL/solo_CAL_stix-cal-energy_20240121T213625-20240122T221922_V04.fits 2026-02-19 03:08:48,767 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__nr9gtr8 2026-02-19 03:08:48,768 Read config from in: /tmp/ecc_context_ecc_cfg_1__nr9gtr8/post_ecc.ini 2026-02-19 03:08:49,988 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__nr9gtr8/solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits 2026-02-19 03:31:36,758 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 03:31:42,667 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 03:31:42,674 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__nr9gtr8 2026-02-19 03:31:42,699 Soop found: SOOP 2026-02-19 03:31:42,798 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/25/CAL/solo_CAL_stix-cal-energy_20240124T225927-20240125T225926_V04.fits 2026-02-19 03:31:42,954 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iam_8mi8 2026-02-19 03:31:42,954 Read config from in: /tmp/ecc_context_ecc_cfg_1_iam_8mi8/post_ecc.ini 2026-02-19 03:31:44,187 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iam_8mi8/solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits 2026-02-19 03:54:28,735 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240128_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 03:54:34,658 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 03:54:34,665 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_iam_8mi8 2026-02-19 03:54:34,690 Soop found: SOOP 2026-02-19 03:54:34,784 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/28/CAL/solo_CAL_stix-cal-energy_20240127T225944-20240128T225944_V04.fits 2026-02-19 03:54:34,936 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_43_jn6rg 2026-02-19 03:54:34,937 Read config from in: /tmp/ecc_context_ecc_cfg_1_43_jn6rg/post_ecc.ini 2026-02-19 03:54:37,097 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_43_jn6rg/solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits 2026-02-19 04:17:07,283 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240109_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 04:17:13,179 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 04:17:13,186 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_43_jn6rg 2026-02-19 04:17:13,210 Soop found: SOOP 2026-02-19 04:17:13,303 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/09/CAL/solo_CAL_stix-cal-energy_20240109T002206-20240110T002206_V04.fits 2026-02-19 04:17:13,457 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ymrjv9ys 2026-02-19 04:17:13,458 Read config from in: /tmp/ecc_context_ecc_cfg_1_ymrjv9ys/post_ecc.ini 2026-02-19 04:17:14,675 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ymrjv9ys/solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits 2026-02-19 04:39:48,246 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240129_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 04:39:54,162 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 04:39:54,169 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ymrjv9ys 2026-02-19 04:39:54,194 Soop found: SOOP 2026-02-19 04:39:54,195 Soop found: SOOP 2026-02-19 04:39:54,289 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/29/CAL/solo_CAL_stix-cal-energy_20240128T225950-20240129T230137_V04.fits 2026-02-19 04:39:54,444 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7_h52ad7 2026-02-19 04:39:54,445 Read config from in: /tmp/ecc_context_ecc_cfg_1_7_h52ad7/post_ecc.ini 2026-02-19 04:39:55,658 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7_h52ad7/solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits 2026-02-19 05:02:38,386 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240102_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 05:02:44,285 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 05:02:44,293 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7_h52ad7 2026-02-19 05:02:44,319 Soop found: SOOP 2026-02-19 05:02:44,413 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/02/CAL/solo_CAL_stix-cal-energy_20240101T132358-20240102T132357_V04.fits 2026-02-19 05:02:44,569 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rhhw_dds 2026-02-19 05:02:44,570 Read config from in: /tmp/ecc_context_ecc_cfg_1_rhhw_dds/post_ecc.ini 2026-02-19 05:02:45,790 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rhhw_dds/solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits 2026-02-19 05:25:38,750 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240113_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 05:25:45,718 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 05:25:45,726 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rhhw_dds 2026-02-19 05:25:45,750 Soop found: SOOP 2026-02-19 05:25:45,842 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/13/CAL/solo_CAL_stix-cal-energy_20240113T005652-20240114T005651_V04.fits 2026-02-19 05:25:45,998 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e0v70llv 2026-02-19 05:25:45,999 Read config from in: /tmp/ecc_context_ecc_cfg_1_e0v70llv/post_ecc.ini 2026-02-19 05:25:47,217 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e0v70llv/solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits 2026-02-19 05:48:15,623 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 05:48:21,488 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 05:48:21,497 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e0v70llv 2026-02-19 05:48:21,524 Soop found: SOOP 2026-02-19 05:48:21,619 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/15/CAL/solo_CAL_stix-cal-energy_20240115T005703-20240116T005703_V04.fits 2026-02-19 05:48:21,773 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dknrl6lv 2026-02-19 05:48:21,773 Read config from in: /tmp/ecc_context_ecc_cfg_1_dknrl6lv/post_ecc.ini 2026-02-19 05:48:22,988 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dknrl6lv/solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits 2026-02-19 06:11:19,662 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240104_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-02-19 06:11:25,567 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-02-19 06:11:25,573 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dknrl6lv 2026-02-19 06:11:25,599 Soop found: SOOP 2026-02-19 06:11:25,694 Writing fits file to /data/stix/out/test/p311_comp_test/CAL/2024/01/04/CAL/solo_CAL_stix-cal-energy_20240103T132410-20240104T132409_V04.fits