2026-03-07 20:05:38,777 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-03-07 20:05:39,720 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260306_004.tm 2026-03-07 20:05:39,983 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260307_001.tm 2026-03-07 20:05:39,984 Create SOCManager @ /data/stix/SOLSOC/from_edds/tm/processing 2026-03-07 20:05:39,991 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-03-07 20:05:40,030 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-07 20:05:40,030 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-03-07 20:05:40,032 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-07 20:05:40,032 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M23_V01.json 2026-03-07 20:05:40,033 newer version (257) found for LTP23_Apr2026-Jun2026: replacing 2026-03-07 20:05:40,033 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-03-07 20:05:40,034 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-03-07 20:05:40,034 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-03-07 20:05:40,035 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-03-07 20:05:40,036 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-03-07 20:05:40,037 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-03-07 20:05:40,037 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-03-07 20:05:40,038 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-03-07 20:05:40,038 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-03-07 20:05:40,039 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-03-07 20:05:40,040 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-03-07 20:05:40,041 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-03-07 20:05:40,041 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-03-07 20:05:40,042 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-03-07 20:05:40,042 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-03-07 20:05:40,043 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-03-07 20:05:40,044 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-03-07 20:05:40,044 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-03-07 20:05:40,045 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-03-07 20:05:40,046 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-03-07 20:05:40,046 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-03-07 20:05:40,047 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-03-07 20:05:40,047 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-03-07 20:05:40,048 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-03-07 20:05:40,048 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-03-07 20:05:40,049 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-03-07 20:05:40,049 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-03-07 20:05:40,050 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-03-07 20:05:40,050 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-03-07 20:05:40,051 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-03-07 20:05:40,051 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-03-07 20:05:40,052 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-03-07 20:05:40,053 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-03-07 20:05:40,053 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-03-07 20:05:40,054 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-03-07 20:05:40,055 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-03-07 20:05:40,055 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-03-07 20:05:40,056 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-03-07 20:05:40,057 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-03-07 20:05:40,057 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-03-07 20:05:40,058 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-03-07 20:05:40,059 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-03-07 20:05:40,059 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-03-07 20:05:40,059 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-03-07 20:05:40,060 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-03-07 20:05:40,060 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-03-07 20:05:40,060 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-03-07 20:05:40,061 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-03-07 20:05:40,061 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-03-07 20:05:40,062 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-03-07 20:05:40,062 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-03-07 20:05:40,063 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-03-07 20:05:40,063 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-03-07 20:05:40,063 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-03-07 20:05:40,064 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-03-07 20:05:40,064 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-03-07 20:05:40,064 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-03-07 20:05:40,065 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-03-07 20:05:40,065 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-03-07 20:05:40,066 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-07 20:05:40,066 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-03-07 20:05:40,067 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-03-07 20:05:40,067 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-03-07 20:05:40,068 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-03-07 20:05:40,069 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-03-07 20:05:40,070 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-03-07 20:05:40,071 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-03-07 20:05:40,072 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-03-07 20:05:40,072 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-03-07 20:05:40,073 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-03-07 20:05:40,073 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-03-07 20:05:40,073 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-03-07 20:05:40,073 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-03-07 20:05:40,074 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-03-07 20:05:40,074 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-03-07 20:05:40,074 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-03-07 20:05:40,074 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-03-07 20:05:40,075 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-07 20:05:40,075 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-03-07 20:05:40,075 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-07 20:05:40,075 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-03-07 20:05:40,075 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-07 20:05:40,075 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-03-07 20:05:40,076 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-07 20:05:40,076 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-03-07 20:05:40,076 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-03-07 20:05:40,361 SOOP Rebuild Index: soops: 562observations 1247 2026-03-07 20:05:55,915 PIPELINE VERSION Version: 1.7.2 Common instrument config version: v0.1.10 PROCESSING VERSIONS Prod: Ephemeris File: /home/stixcore/STIXCore/stixcore/products/ANC/aspect.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/CAL/energy.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/stixcore/STIXCore/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-03-07 20:05:55,916 CONFIG [Paths] tm_archive = /data/stix/SOLSOC/from_edds/tm/processing fits_archive = /data/stix/out/fits_v1.2.0 spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12388 parallel_batchsize_l0 = 100 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = INFO log_dir = /data/stix/out/fits_v1.2.0/logging error_mail_send = True error_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch sync_tm_at_start = True stop_after_unprocessed = True start_with_unprocessed = True last_processed = TM_LTP21_BatchRequest.PktTmRaw.SOL.0.2025.237.08.00.24.563.NHzM@2025.365.16.00.00.336.1.xml.out history_db_file = /home/stixcore/soar_pub/processing_history.sqlite [Publish] db_file = /home/stixcore/soar_pub/published.sqlite include_levels = L0, L1, ANC, LL03 waiting_period = 42d target_dir = /home/stixcore/from_pub099 report_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie report_mail_send = True same_esa_name_dir = /data/stix/out/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/fits_v1.2.0 ll_waiting_period = 0d target_host = pub026.cs.technik.fhnw.ch supplement_report = /home/stixcore/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal,asp log_dir = /data/stix/out/fits_v1.2.0/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-03-07 20:05:55,917 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 36325 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260306_004.tm'), 'pred', datetime.datetime(2026, 3, 6, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260307_001.tm'), 'flown', datetime.datetime(2026, 3, 7, 0, 0))] IDBManager: /home/stixcore/STIXCore/stixcore/data/idb Versions: [{'label': '2.26.36', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-03-07 20:05:57,058 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260306_004.tm 2026-03-07 20:05:57,315 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260307_001.tm 2026-03-07 20:05:57,316 Loaded 1 ECC configurations from index 2026-03-07 20:05:57,480 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20220918.csv 2026-03-07 20:05:57,513 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nc4vs_ea 2026-03-07 20:05:57,514 Read config from in: /tmp/ecc_context_ecc_cfg_1_nc4vs_ea/post_ecc.ini 2026-03-07 20:05:58,777 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nc4vs_ea/solo_L1_stix-cal-energy_20221030_V03_ecc_in.fits 2026-03-07 20:15:38,810 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221030_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221030_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 20:15:45,122 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 20:15:45,130 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nc4vs_ea 2026-03-07 20:15:45,175 Soop found: SOOP 2026-03-07 20:15:45,290 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/30/CAL/solo_CAL_stix-cal-energy_20221030T040854-20221030T063353_V02.fits 2026-03-07 20:15:45,727 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_smpjn9pd 2026-03-07 20:15:45,728 Read config from in: /tmp/ecc_context_ecc_cfg_1_smpjn9pd/post_ecc.ini 2026-03-07 20:15:46,977 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_smpjn9pd/solo_L1_stix-cal-energy_20221010_V03_ecc_in.fits 2026-03-07 20:25:39,897 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221010_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221010_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 20:25:49,227 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 20:25:49,234 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_smpjn9pd 2026-03-07 20:25:49,260 Soop found: SOOP 2026-03-07 20:25:49,358 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/10/CAL/solo_CAL_stix-cal-energy_20221010T040100-20221010T062500_V02.fits 2026-03-07 20:25:49,522 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ziibnm0p 2026-03-07 20:25:49,522 Read config from in: /tmp/ecc_context_ecc_cfg_1_ziibnm0p/post_ecc.ini 2026-03-07 20:25:50,775 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ziibnm0p/solo_L1_stix-cal-energy_20221024_V03_ecc_in.fits 2026-03-07 20:34:46,526 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221024_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221024_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 20:34:53,079 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 20:34:53,087 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ziibnm0p 2026-03-07 20:34:53,118 Soop found: SOOP 2026-03-07 20:34:53,118 Soop found: SOOP 2026-03-07 20:34:53,222 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/24/CAL/solo_CAL_stix-cal-energy_20221024T043518-20221024T063152_V02.fits 2026-03-07 20:34:53,662 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b71zjmoh 2026-03-07 20:34:53,663 Read config from in: /tmp/ecc_context_ecc_cfg_1_b71zjmoh/post_ecc.ini 2026-03-07 20:34:54,999 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b71zjmoh/solo_L1_stix-cal-energy_20221008_V03_ecc_in.fits 2026-03-07 20:44:42,164 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221008_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221008_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 20:44:49,493 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 20:44:49,500 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b71zjmoh 2026-03-07 20:44:49,529 Soop found: SOOP 2026-03-07 20:44:49,626 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/08/CAL/solo_CAL_stix-cal-energy_20221008T040628-20221008T063028_V02.fits 2026-03-07 20:44:49,785 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sj9rq6p9 2026-03-07 20:44:49,785 Read config from in: /tmp/ecc_context_ecc_cfg_1_sj9rq6p9/post_ecc.ini 2026-03-07 20:44:51,021 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sj9rq6p9/solo_L1_stix-cal-energy_20221005_V03_ecc_in.fits 2026-03-07 20:53:53,208 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221005_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221005_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 20:53:59,479 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 20:53:59,487 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sj9rq6p9 2026-03-07 20:53:59,516 No soops found for time: 2022-10-05 04:06:13.978440 - 2022-10-05 06:30:12.993711 2026-03-07 20:53:59,612 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/05/CAL/solo_CAL_stix-cal-energy_20221005T040613-20221005T063012_V02.fits 2026-03-07 20:53:59,783 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n3l2hql1 2026-03-07 20:53:59,783 Read config from in: /tmp/ecc_context_ecc_cfg_1_n3l2hql1/post_ecc.ini 2026-03-07 20:54:01,032 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n3l2hql1/solo_L1_stix-cal-energy_20221014_V03_ecc_in.fits 2026-03-07 21:04:00,054 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221014_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221014_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 21:04:06,449 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 21:04:06,457 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n3l2hql1 2026-03-07 21:04:06,484 Soop found: SOOP 2026-03-07 21:04:06,581 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/14/CAL/solo_CAL_stix-cal-energy_20221014T040122-20221014T062521_V02.fits 2026-03-07 21:04:07,013 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o2a69oae 2026-03-07 21:04:07,013 Read config from in: /tmp/ecc_context_ecc_cfg_1_o2a69oae/post_ecc.ini 2026-03-07 21:04:08,264 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o2a69oae/solo_L1_stix-cal-energy_20221007_V03_ecc_in.fits 2026-03-07 21:13:48,780 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221007_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221007_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 21:13:55,145 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 21:13:55,152 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o2a69oae 2026-03-07 21:13:55,180 No soops found for time: 2022-10-07 04:06:23.292938 - 2022-10-07 06:30:23.308392 2026-03-07 21:13:55,275 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/07/CAL/solo_CAL_stix-cal-energy_20221007T040623-20221007T063023_V02.fits 2026-03-07 21:13:55,443 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0dn60wab 2026-03-07 21:13:55,443 Read config from in: /tmp/ecc_context_ecc_cfg_1_0dn60wab/post_ecc.ini 2026-03-07 21:13:58,147 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0dn60wab/solo_L1_stix-cal-energy_20221020_V03_ecc_in.fits 2026-03-07 21:22:56,852 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221020_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221020_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 21:23:03,093 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 21:23:03,100 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0dn60wab 2026-03-07 21:23:03,126 Soop found: SOOP 2026-03-07 21:23:03,223 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/20/CAL/solo_CAL_stix-cal-energy_20221020T041116-20221020T063516_V02.fits 2026-03-07 21:23:03,386 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7waaubcu 2026-03-07 21:23:03,387 Read config from in: /tmp/ecc_context_ecc_cfg_1_7waaubcu/post_ecc.ini 2026-03-07 21:23:04,640 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7waaubcu/solo_L1_stix-cal-energy_20221006_V03_ecc_in.fits 2026-03-07 21:32:24,313 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221006_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221006_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 21:32:30,653 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 21:32:30,660 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7waaubcu 2026-03-07 21:32:30,687 No soops found for time: 2022-10-06 04:06:18.138397 - 2022-10-06 06:30:18.153850 2026-03-07 21:32:30,781 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/06/CAL/solo_CAL_stix-cal-energy_20221006T040618-20221006T063018_V02.fits 2026-03-07 21:32:30,946 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dstgg8ec 2026-03-07 21:32:30,946 Read config from in: /tmp/ecc_context_ecc_cfg_1_dstgg8ec/post_ecc.ini 2026-03-07 21:32:32,184 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dstgg8ec/solo_L1_stix-cal-energy_20221003_V03_ecc_in.fits 2026-03-07 21:41:37,503 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221003_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221003_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 21:41:43,768 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 21:41:43,778 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dstgg8ec 2026-03-07 21:41:43,806 No soops found for time: 2022-10-03 03:51:00.671023 - 2022-10-03 06:15:00.686296 2026-03-07 21:41:43,905 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/03/CAL/solo_CAL_stix-cal-energy_20221003T035100-20221003T061500_V02.fits 2026-03-07 21:41:44,070 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i7k05zmv 2026-03-07 21:41:44,070 Read config from in: /tmp/ecc_context_ecc_cfg_1_i7k05zmv/post_ecc.ini 2026-03-07 21:41:45,318 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i7k05zmv/solo_L1_stix-cal-energy_20221017_V03_ecc_in.fits 2026-03-07 21:50:56,407 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221017_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221017_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 21:51:02,654 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 21:51:02,662 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i7k05zmv 2026-03-07 21:51:02,692 Soop found: SOOP 2026-03-07 21:51:02,790 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/17/CAL/solo_CAL_stix-cal-energy_20221017T041100-20221017T063500_V02.fits 2026-03-07 21:51:03,185 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w6r9ja9d 2026-03-07 21:51:03,185 Read config from in: /tmp/ecc_context_ecc_cfg_1_w6r9ja9d/post_ecc.ini 2026-03-07 21:51:04,434 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w6r9ja9d/solo_L1_stix-cal-energy_20221018_V03_ecc_in.fits 2026-03-07 22:00:34,071 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221018_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221018_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 22:00:40,419 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 22:00:40,426 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w6r9ja9d 2026-03-07 22:00:40,451 Soop found: SOOP 2026-03-07 22:00:40,547 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/18/CAL/solo_CAL_stix-cal-energy_20221018T041106-20221018T063506_V02.fits 2026-03-07 22:00:40,704 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rbk2j4od 2026-03-07 22:00:40,704 Read config from in: /tmp/ecc_context_ecc_cfg_1_rbk2j4od/post_ecc.ini 2026-03-07 22:00:41,948 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rbk2j4od/solo_L1_stix-cal-energy_20221023_V03_ecc_in.fits 2026-03-07 22:09:36,282 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221023_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221023_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 22:09:42,507 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 22:09:42,514 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rbk2j4od 2026-03-07 22:09:42,540 Soop found: SOOP 2026-03-07 22:09:42,540 Soop found: SOOP 2026-03-07 22:09:42,634 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/23/CAL/solo_CAL_stix-cal-energy_20221023T041132-20221023T063754_V02.fits 2026-03-07 22:09:44,121 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_clxnpnbq 2026-03-07 22:09:44,121 Read config from in: /tmp/ecc_context_ecc_cfg_1_clxnpnbq/post_ecc.ini 2026-03-07 22:09:45,366 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_clxnpnbq/solo_L1_stix-cal-energy_20221016_V03_ecc_in.fits 2026-03-07 22:19:52,834 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221016_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221016_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 22:19:59,061 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 22:19:59,068 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_clxnpnbq 2026-03-07 22:19:59,093 Soop found: SOOP 2026-03-07 22:19:59,188 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/16/CAL/solo_CAL_stix-cal-energy_20221016T040131-20221016T062531_V02.fits 2026-03-07 22:19:59,347 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__hgvok8e 2026-03-07 22:19:59,348 Read config from in: /tmp/ecc_context_ecc_cfg_1__hgvok8e/post_ecc.ini 2026-03-07 22:20:00,602 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__hgvok8e/solo_L1_stix-cal-energy_20221021_V03_ecc_in.fits 2026-03-07 22:29:10,465 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221021_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221021_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 22:29:16,764 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 22:29:16,772 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__hgvok8e 2026-03-07 22:29:16,799 Soop found: SOOP 2026-03-07 22:29:16,799 Soop found: SOOP 2026-03-07 22:29:16,894 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/21/CAL/solo_CAL_stix-cal-energy_20221021T041121-20221021T063521_V02.fits 2026-03-07 22:29:17,050 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9fvpbtwq 2026-03-07 22:29:17,050 Read config from in: /tmp/ecc_context_ecc_cfg_1_9fvpbtwq/post_ecc.ini 2026-03-07 22:29:18,290 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9fvpbtwq/solo_L1_stix-cal-energy_20221012_V03_ecc_in.fits 2026-03-07 22:39:00,657 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221012_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221012_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 22:39:06,913 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 22:39:06,919 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9fvpbtwq 2026-03-07 22:39:06,946 Soop found: SOOP 2026-03-07 22:39:06,947 Soop found: SOOP 2026-03-07 22:39:07,052 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/12/CAL/solo_CAL_stix-cal-energy_20221012T040112-20221012T062512_V02.fits 2026-03-07 22:39:07,276 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jwmubpt5 2026-03-07 22:39:07,277 Read config from in: /tmp/ecc_context_ecc_cfg_1_jwmubpt5/post_ecc.ini 2026-03-07 22:39:08,519 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jwmubpt5/solo_L1_stix-cal-energy_20221027_V03_ecc_in.fits 2026-03-07 22:47:55,771 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221027_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221027_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 22:48:02,020 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 22:48:02,028 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jwmubpt5 2026-03-07 22:48:02,053 Soop found: SOOP 2026-03-07 22:48:02,147 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/27/CAL/solo_CAL_stix-cal-energy_20221027T040840-20221027T063240_V02.fits 2026-03-07 22:48:02,578 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x2jw2u16 2026-03-07 22:48:02,579 Read config from in: /tmp/ecc_context_ecc_cfg_1_x2jw2u16/post_ecc.ini 2026-03-07 22:48:03,833 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x2jw2u16/solo_L1_stix-cal-energy_20221011_V03_ecc_in.fits 2026-03-07 22:58:12,664 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221011_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221011_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 22:58:19,070 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 22:58:19,077 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x2jw2u16 2026-03-07 22:58:19,103 Soop found: SOOP 2026-03-07 22:58:19,198 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/11/CAL/solo_CAL_stix-cal-energy_20221011T040105-20221011T062505_V02.fits 2026-03-07 22:58:19,356 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mvc3atyg 2026-03-07 22:58:19,357 Read config from in: /tmp/ecc_context_ecc_cfg_1_mvc3atyg/post_ecc.ini 2026-03-07 22:58:20,615 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mvc3atyg/solo_L1_stix-cal-energy_20221026_V03_ecc_in.fits 2026-03-07 23:07:22,010 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221026_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221026_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 23:07:29,699 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 23:07:29,706 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mvc3atyg 2026-03-07 23:07:29,730 Soop found: SOOP 2026-03-07 23:07:29,824 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/26/CAL/solo_CAL_stix-cal-energy_20221026T040836-20221026T063235_V02.fits 2026-03-07 23:07:30,000 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ikvoribz 2026-03-07 23:07:30,001 Read config from in: /tmp/ecc_context_ecc_cfg_1_ikvoribz/post_ecc.ini 2026-03-07 23:07:31,255 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ikvoribz/solo_L1_stix-cal-energy_20221019_V03_ecc_in.fits 2026-03-07 23:16:48,629 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221019_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221019_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 23:16:54,959 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 23:16:54,967 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ikvoribz 2026-03-07 23:16:54,995 Soop found: SOOP 2026-03-07 23:16:55,096 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/19/CAL/solo_CAL_stix-cal-energy_20221019T041111-20221019T063511_V02.fits 2026-03-07 23:16:55,266 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5trvmrdi 2026-03-07 23:16:55,266 Read config from in: /tmp/ecc_context_ecc_cfg_1_5trvmrdi/post_ecc.ini 2026-03-07 23:16:56,523 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5trvmrdi/solo_L1_stix-cal-energy_20221022_V03_ecc_in.fits 2026-03-07 23:25:49,903 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221022_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221022_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 23:25:56,147 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 23:25:56,154 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5trvmrdi 2026-03-07 23:25:56,179 Soop found: SOOP 2026-03-07 23:25:56,179 Soop found: SOOP 2026-03-07 23:25:56,274 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/22/CAL/solo_CAL_stix-cal-energy_20221022T041126-20221022T063526_V02.fits 2026-03-07 23:25:56,731 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zbq7kruc 2026-03-07 23:25:56,732 Read config from in: /tmp/ecc_context_ecc_cfg_1_zbq7kruc/post_ecc.ini 2026-03-07 23:25:57,963 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zbq7kruc/solo_L1_stix-cal-energy_20221025_V03_ecc_in.fits 2026-03-07 23:34:47,105 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221025_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221025_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 23:34:53,291 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 23:34:53,298 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zbq7kruc 2026-03-07 23:34:53,323 Soop found: SOOP 2026-03-07 23:34:53,323 Soop found: SOOP 2026-03-07 23:34:53,417 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/25/CAL/solo_CAL_stix-cal-energy_20221025T000701-20221025T024250_V02.fits 2026-03-07 23:34:53,845 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y9zr1vss 2026-03-07 23:34:53,846 Read config from in: /tmp/ecc_context_ecc_cfg_1_y9zr1vss/post_ecc.ini 2026-03-07 23:34:55,094 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y9zr1vss/solo_L1_stix-cal-energy_20221028_V03_ecc_in.fits 2026-03-07 23:43:51,243 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221028_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221028_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 23:43:57,584 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 23:43:57,591 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y9zr1vss 2026-03-07 23:43:57,617 Soop found: SOOP 2026-03-07 23:43:57,713 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/28/CAL/solo_CAL_stix-cal-energy_20221028T040845-20221028T063245_V02.fits 2026-03-07 23:43:57,877 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_owgildw_ 2026-03-07 23:43:57,878 Read config from in: /tmp/ecc_context_ecc_cfg_1_owgildw_/post_ecc.ini 2026-03-07 23:43:59,127 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_owgildw_/solo_L1_stix-cal-energy_20221029_V03_ecc_in.fits 2026-03-07 23:53:33,840 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221029_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221029_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221029_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221029_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 23:53:40,804 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 23:53:40,819 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_owgildw_ 2026-03-07 23:53:40,868 Soop found: SOOP 2026-03-07 23:53:40,972 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/29/CAL/solo_CAL_stix-cal-energy_20221029T040850-20221029T063249_V02.fits 2026-03-07 23:53:41,412 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cptk0hyd 2026-03-07 23:53:41,413 Read config from in: /tmp/ecc_context_ecc_cfg_1_cptk0hyd/post_ecc.ini 2026-03-07 23:53:44,143 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cptk0hyd/solo_L1_stix-cal-energy_20221002_V03_ecc_in.fits 2026-03-08 00:03:25,202 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221002_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221002_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221002_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221002_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 00:03:31,551 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 00:03:31,558 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cptk0hyd 2026-03-08 00:03:31,584 No soops found for time: 2022-10-01 23:32:51.490925 - 2022-10-02 01:56:51.506197 2026-03-08 00:03:31,680 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/02/CAL/solo_CAL_stix-cal-energy_20221001T233251-20221002T015651_V02.fits 2026-03-08 00:03:31,835 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jy2yi0vp 2026-03-08 00:03:31,836 Read config from in: /tmp/ecc_context_ecc_cfg_1_jy2yi0vp/post_ecc.ini 2026-03-08 00:03:33,090 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jy2yi0vp/solo_L1_stix-cal-energy_20221013_V03_ecc_in.fits 2026-03-08 00:13:56,262 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221013_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221013_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221013_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221013_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 00:14:02,548 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 00:14:02,556 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jy2yi0vp 2026-03-08 00:14:02,582 Soop found: SOOP 2026-03-08 00:14:02,676 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/13/CAL/solo_CAL_stix-cal-energy_20221013T040116-20221013T062516_V02.fits 2026-03-08 00:14:02,842 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rh5tl0tg 2026-03-08 00:14:02,843 Read config from in: /tmp/ecc_context_ecc_cfg_1_rh5tl0tg/post_ecc.ini 2026-03-08 00:14:04,084 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rh5tl0tg/solo_L1_stix-cal-energy_20221015_V03_ecc_in.fits 2026-03-08 00:23:38,860 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221015_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221015_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221015_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221015_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 00:23:46,276 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-08 00:23:46,283 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rh5tl0tg 2026-03-08 00:23:46,310 Soop found: SOOP 2026-03-08 00:23:46,405 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/15/CAL/solo_CAL_stix-cal-energy_20221015T040127-20221015T062527_V02.fits 2026-03-08 00:23:46,796 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_334h_5tr 2026-03-08 00:23:46,796 Read config from in: /tmp/ecc_context_ecc_cfg_1_334h_5tr/post_ecc.ini 2026-03-08 00:23:48,040 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_334h_5tr/solo_L1_stix-cal-energy_20221004_V03_ecc_in.fits 2026-03-08 00:32:43,276 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221004_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221004_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221004_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221004_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 00:32:50,142 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 00:32:50,150 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_334h_5tr 2026-03-08 00:32:50,182 No soops found for time: 2022-10-04 03:51:05.824108 - 2022-10-04 06:15:41.839444 2026-03-08 00:32:50,285 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/10/04/CAL/solo_CAL_stix-cal-energy_20221004T035105-20221004T061541_V02.fits 2026-03-08 00:32:50,436 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20211209.csv 2026-03-08 00:32:50,468 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v75x62n1 2026-03-08 00:32:50,469 Read config from in: /tmp/ecc_context_ecc_cfg_1_v75x62n1/post_ecc.ini 2026-03-08 00:32:51,744 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v75x62n1/solo_L1_stix-cal-energy_20220130_V03_ecc_in.fits 2026-03-08 00:41:54,262 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220130_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220130_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 00:42:01,189 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 00:42:01,196 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v75x62n1 2026-03-08 00:42:01,226 Soop found: SOOP 2026-03-08 00:42:01,327 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/30/CAL/solo_CAL_stix-cal-energy_20220130T044827-20220130T071226_V02.fits 2026-03-08 00:42:01,729 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r8h7kfj1 2026-03-08 00:42:01,730 Read config from in: /tmp/ecc_context_ecc_cfg_1_r8h7kfj1/post_ecc.ini 2026-03-08 00:42:03,020 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r8h7kfj1/solo_L1_stix-cal-energy_20220101_V03_ecc_in.fits 2026-03-08 00:51:01,585 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 00:51:09,330 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 00:51:09,337 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r8h7kfj1 2026-03-08 00:51:09,362 No soops found for time: 2022-01-01 07:31:24.721394 - 2022-01-01 09:55:23.736032 2026-03-08 00:51:09,455 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/01/CAL/solo_CAL_stix-cal-energy_20220101T073124-20220101T095523_V02.fits 2026-03-08 00:51:09,610 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yiaqeswt 2026-03-08 00:51:09,610 Read config from in: /tmp/ecc_context_ecc_cfg_1_yiaqeswt/post_ecc.ini 2026-03-08 00:51:10,844 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yiaqeswt/solo_L1_stix-cal-energy_20220124_V03_ecc_in.fits 2026-03-08 01:00:12,765 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 01:00:19,085 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 01:00:19,092 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yiaqeswt 2026-03-08 01:00:19,118 Soop found: SOOP 2026-03-08 01:00:19,214 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/24/CAL/solo_CAL_stix-cal-energy_20220124T044801-20220124T071200_V02.fits 2026-03-08 01:00:19,616 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_frzas96b 2026-03-08 01:00:19,617 Read config from in: /tmp/ecc_context_ecc_cfg_1_frzas96b/post_ecc.ini 2026-03-08 01:00:20,875 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_frzas96b/solo_L1_stix-cal-energy_20220108_V03_ecc_in.fits 2026-03-08 01:09:20,007 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220108_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220108_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 01:09:26,481 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 01:09:26,488 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_frzas96b 2026-03-08 01:09:26,518 No soops found for time: 2022-01-08 07:41:24.747213 - 2022-01-08 10:05:23.761851 2026-03-08 01:09:26,614 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/08/CAL/solo_CAL_stix-cal-energy_20220108T074124-20220108T100523_V02.fits 2026-03-08 01:09:26,782 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jargeiix 2026-03-08 01:09:26,783 Read config from in: /tmp/ecc_context_ecc_cfg_1_jargeiix/post_ecc.ini 2026-03-08 01:09:28,037 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jargeiix/solo_L1_stix-cal-energy_20220105_V03_ecc_in.fits 2026-03-08 01:18:25,489 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220105_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220105_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 01:18:31,752 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 01:18:31,761 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jargeiix 2026-03-08 01:18:31,794 No soops found for time: 2022-01-05 07:41:10.307987 - 2022-01-05 10:05:09.322626 2026-03-08 01:18:31,903 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/05/CAL/solo_CAL_stix-cal-energy_20220105T074110-20220105T100509_V02.fits 2026-03-08 01:18:32,085 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2nja3a0w 2026-03-08 01:18:32,085 Read config from in: /tmp/ecc_context_ecc_cfg_1_2nja3a0w/post_ecc.ini 2026-03-08 01:18:33,340 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2nja3a0w/solo_L1_stix-cal-energy_20220114_V03_ecc_in.fits 2026-03-08 01:27:30,248 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 01:27:36,520 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 01:27:36,528 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2nja3a0w 2026-03-08 01:27:36,554 No soops found for time: 2022-01-14 04:32:11.606377 - 2022-01-14 06:56:10.621016 2026-03-08 01:27:36,651 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/14/CAL/solo_CAL_stix-cal-energy_20220114T043211-20220114T065610_V02.fits 2026-03-08 01:27:36,806 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ikjuan00 2026-03-08 01:27:36,807 Read config from in: /tmp/ecc_context_ecc_cfg_1_ikjuan00/post_ecc.ini 2026-03-08 01:27:38,046 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ikjuan00/solo_L1_stix-cal-energy_20220107_V03_ecc_in.fits 2026-03-08 01:36:45,281 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220107_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220107_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 01:36:51,516 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 01:36:51,523 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ikjuan00 2026-03-08 01:36:51,549 No soops found for time: 2022-01-07 07:41:19.600804 - 2022-01-07 10:05:19.615444 2026-03-08 01:36:51,649 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/07/CAL/solo_CAL_stix-cal-energy_20220107T074119-20220107T100519_V02.fits 2026-03-08 01:36:51,805 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p1trr_b0 2026-03-08 01:36:51,806 Read config from in: /tmp/ecc_context_ecc_cfg_1_p1trr_b0/post_ecc.ini 2026-03-08 01:36:54,468 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p1trr_b0/solo_L1_stix-cal-energy_20220120_V03_ecc_in.fits 2026-03-08 01:45:54,039 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220120_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220120_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 01:46:01,148 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 01:46:01,158 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p1trr_b0 2026-03-08 01:46:01,188 Soop found: SOOP 2026-03-08 01:46:01,292 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/20/CAL/solo_CAL_stix-cal-energy_20220120T045024-20220120T071430_V02.fits 2026-03-08 01:46:01,460 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ws_iia78 2026-03-08 01:46:01,462 Read config from in: /tmp/ecc_context_ecc_cfg_1_ws_iia78/post_ecc.ini 2026-03-08 01:46:02,732 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ws_iia78/solo_L1_stix-cal-energy_20220106_V03_ecc_in.fits 2026-03-08 01:55:02,279 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220106_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220106_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 01:55:08,461 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 01:55:08,467 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ws_iia78 2026-03-08 01:55:08,497 No soops found for time: 2022-01-06 07:41:14.454395 - 2022-01-06 10:05:14.469035 2026-03-08 01:55:08,594 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/06/CAL/solo_CAL_stix-cal-energy_20220106T074114-20220106T100514_V02.fits 2026-03-08 01:55:08,984 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x7zq1inn 2026-03-08 01:55:08,984 Read config from in: /tmp/ecc_context_ecc_cfg_1_x7zq1inn/post_ecc.ini 2026-03-08 01:55:10,270 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x7zq1inn/solo_L1_stix-cal-energy_20220103_V03_ecc_in.fits 2026-03-08 02:04:16,042 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220103_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220103_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 02:04:22,925 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 02:04:22,932 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x7zq1inn 2026-03-08 02:04:22,962 No soops found for time: 2022-01-03 07:41:01.015171 - 2022-01-03 10:05:00.029810 2026-03-08 02:04:23,064 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/03/CAL/solo_CAL_stix-cal-energy_20220103T074101-20220103T100500_V02.fits 2026-03-08 02:04:23,235 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yxo9ah9z 2026-03-08 02:04:23,236 Read config from in: /tmp/ecc_context_ecc_cfg_1_yxo9ah9z/post_ecc.ini 2026-03-08 02:04:24,500 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yxo9ah9z/solo_L1_stix-cal-energy_20220117_V03_ecc_in.fits 2026-03-08 02:13:33,319 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220117_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220117_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 02:13:39,524 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 02:13:39,531 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yxo9ah9z 2026-03-08 02:13:39,558 No soops found for time: 2022-01-17 04:41:01.046475 - 2022-01-17 07:05:00.061113 2026-03-08 02:13:39,652 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/17/CAL/solo_CAL_stix-cal-energy_20220117T044101-20220117T070500_V02.fits 2026-03-08 02:13:39,815 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_91src7hw 2026-03-08 02:13:39,816 Read config from in: /tmp/ecc_context_ecc_cfg_1_91src7hw/post_ecc.ini 2026-03-08 02:13:41,068 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_91src7hw/solo_L1_stix-cal-energy_20220131_V03_ecc_in.fits 2026-03-08 02:22:40,240 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220131_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220131_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 02:22:46,478 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 02:22:46,488 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_91src7hw 2026-03-08 02:22:46,517 Soop found: SOOP 2026-03-08 02:22:46,611 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/31/CAL/solo_CAL_stix-cal-energy_20220131T045601-20220131T072000_V02.fits 2026-03-08 02:22:46,779 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jcnxflfx 2026-03-08 02:22:46,779 Read config from in: /tmp/ecc_context_ecc_cfg_1_jcnxflfx/post_ecc.ini 2026-03-08 02:22:48,050 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jcnxflfx/solo_L1_stix-cal-energy_20220118_V03_ecc_in.fits 2026-03-08 02:31:52,073 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220118_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220118_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 02:31:59,626 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 02:31:59,633 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jcnxflfx 2026-03-08 02:31:59,658 No soops found for time: 2022-01-18 04:41:06.187293 - 2022-01-18 07:05:05.201934 2026-03-08 02:31:59,752 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/18/CAL/solo_CAL_stix-cal-energy_20220118T044106-20220118T070505_V02.fits 2026-03-08 02:31:59,914 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3jaf60ra 2026-03-08 02:31:59,915 Read config from in: /tmp/ecc_context_ecc_cfg_1_3jaf60ra/post_ecc.ini 2026-03-08 02:32:01,148 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3jaf60ra/solo_L1_stix-cal-energy_20220116_V03_ecc_in.fits 2026-03-08 02:40:55,012 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220116_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220116_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 02:41:01,217 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 02:41:01,224 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3jaf60ra 2026-03-08 02:41:01,249 No soops found for time: 2022-01-16 04:32:19.899192 - 2022-01-16 06:56:18.913830 2026-03-08 02:41:01,343 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/16/CAL/solo_CAL_stix-cal-energy_20220116T043219-20220116T065618_V02.fits 2026-03-08 02:41:01,502 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eg5o8hsd 2026-03-08 02:41:01,503 Read config from in: /tmp/ecc_context_ecc_cfg_1_eg5o8hsd/post_ecc.ini 2026-03-08 02:41:02,744 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eg5o8hsd/solo_L1_stix-cal-energy_20220121_V03_ecc_in.fits 2026-03-08 02:49:56,960 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220121_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220121_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 02:50:03,188 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 02:50:03,195 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eg5o8hsd 2026-03-08 02:50:03,221 Soop found: SOOP 2026-03-08 02:50:03,315 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/21/CAL/solo_CAL_stix-cal-energy_20220121T045243-20220121T071643_V02.fits 2026-03-08 02:50:03,478 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0i_0tz_h 2026-03-08 02:50:03,478 Read config from in: /tmp/ecc_context_ecc_cfg_1_0i_0tz_h/post_ecc.ini 2026-03-08 02:50:04,722 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0i_0tz_h/solo_L1_stix-cal-energy_20220112_V03_ecc_in.fits 2026-03-08 02:58:58,904 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220112_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220112_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 02:59:05,196 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 02:59:05,204 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0i_0tz_h 2026-03-08 02:59:05,231 No soops found for time: 2022-01-12 04:32:03.313563 - 2022-01-12 06:56:02.328201 2026-03-08 02:59:05,329 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/12/CAL/solo_CAL_stix-cal-energy_20220112T043203-20220112T065602_V02.fits 2026-03-08 02:59:05,723 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u_djpnac 2026-03-08 02:59:05,724 Read config from in: /tmp/ecc_context_ecc_cfg_1_u_djpnac/post_ecc.ini 2026-03-08 02:59:06,970 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u_djpnac/solo_L1_stix-cal-energy_20220127_V03_ecc_in.fits 2026-03-08 03:08:08,369 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220127_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220127_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 03:08:14,634 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 03:08:14,642 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u_djpnac 2026-03-08 03:08:14,670 Soop found: SOOP 2026-03-08 03:08:14,765 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/27/CAL/solo_CAL_stix-cal-energy_20220127T044813-20220127T071212_V02.fits 2026-03-08 03:08:15,195 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_onx948j4 2026-03-08 03:08:15,196 Read config from in: /tmp/ecc_context_ecc_cfg_1_onx948j4/post_ecc.ini 2026-03-08 03:08:16,456 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_onx948j4/solo_L1_stix-cal-energy_20220126_V03_ecc_in.fits 2026-03-08 03:17:18,002 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220126_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220126_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 03:17:24,272 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 03:17:24,280 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_onx948j4 2026-03-08 03:17:24,306 Soop found: SOOP 2026-03-08 03:17:24,400 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/26/CAL/solo_CAL_stix-cal-energy_20220126T044808-20220126T071208_V02.fits 2026-03-08 03:17:24,791 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5wf0soeh 2026-03-08 03:17:24,791 Read config from in: /tmp/ecc_context_ecc_cfg_1_5wf0soeh/post_ecc.ini 2026-03-08 03:17:27,463 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5wf0soeh/solo_L1_stix-cal-energy_20220119_V03_ecc_in.fits 2026-03-08 03:26:28,092 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220119_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220119_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 03:26:34,323 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 03:26:34,335 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5wf0soeh 2026-03-08 03:26:34,369 No soops found for time: 2022-01-19 04:41:10.333725 - 2022-01-19 07:05:31.348404 2026-03-08 03:26:34,468 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/19/CAL/solo_CAL_stix-cal-energy_20220119T044110-20220119T070531_V02.fits 2026-03-08 03:26:34,634 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fihjwu2h 2026-03-08 03:26:34,634 Read config from in: /tmp/ecc_context_ecc_cfg_1_fihjwu2h/post_ecc.ini 2026-03-08 03:26:35,887 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fihjwu2h/solo_L1_stix-cal-energy_20220122_V03_ecc_in.fits 2026-03-08 03:35:33,905 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220122_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220122_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 03:35:40,361 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 03:35:40,368 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fihjwu2h 2026-03-08 03:35:40,393 Soop found: SOOP 2026-03-08 03:35:40,486 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/22/CAL/solo_CAL_stix-cal-energy_20220122T045248-20220122T071647_V02.fits 2026-03-08 03:35:40,638 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ld7g7656 2026-03-08 03:35:40,638 Read config from in: /tmp/ecc_context_ecc_cfg_1_ld7g7656/post_ecc.ini 2026-03-08 03:35:41,890 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ld7g7656/solo_L1_stix-cal-energy_20220125_V03_ecc_in.fits 2026-03-08 03:44:42,279 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220125_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220125_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 03:44:48,502 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 03:44:48,509 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ld7g7656 2026-03-08 03:44:48,535 Soop found: SOOP 2026-03-08 03:44:48,627 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/25/CAL/solo_CAL_stix-cal-energy_20220125T044804-20220125T071204_V02.fits 2026-03-08 03:44:48,784 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_17gfafi3 2026-03-08 03:44:48,785 Read config from in: /tmp/ecc_context_ecc_cfg_1_17gfafi3/post_ecc.ini 2026-03-08 03:44:50,023 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_17gfafi3/solo_L1_stix-cal-energy_20220128_V03_ecc_in.fits 2026-03-08 03:53:52,549 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220128_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220128_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 03:53:58,942 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 03:53:58,950 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_17gfafi3 2026-03-08 03:53:58,976 Soop found: SOOP 2026-03-08 03:53:59,073 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/28/CAL/solo_CAL_stix-cal-energy_20220128T044818-20220128T071217_V02.fits 2026-03-08 03:53:59,504 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ezlsmgr0 2026-03-08 03:53:59,504 Read config from in: /tmp/ecc_context_ecc_cfg_1_ezlsmgr0/post_ecc.ini 2026-03-08 03:54:00,774 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ezlsmgr0/solo_L1_stix-cal-energy_20220109_V03_ecc_in.fits 2026-03-08 04:02:58,520 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220109_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220109_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 04:03:04,958 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 04:03:04,965 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ezlsmgr0 2026-03-08 04:03:04,991 No soops found for time: 2022-01-09 07:41:28.893620 - 2022-01-09 08:18:19.897367 2026-03-08 04:03:05,087 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/09/CAL/solo_CAL_stix-cal-energy_20220109T074128-20220109T081819_V02.fits 2026-03-08 04:03:05,259 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_opfg2dx4 2026-03-08 04:03:05,260 Read config from in: /tmp/ecc_context_ecc_cfg_1_opfg2dx4/post_ecc.ini 2026-03-08 04:03:06,522 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_opfg2dx4/solo_L1_stix-cal-energy_20220129_V03_ecc_in.fits 2026-03-08 04:12:00,530 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220129_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220129_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 04:12:08,255 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 04:12:08,264 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_opfg2dx4 2026-03-08 04:12:08,290 Soop found: SOOP 2026-03-08 04:12:08,382 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/29/CAL/solo_CAL_stix-cal-energy_20220129T044822-20220129T071222_V02.fits 2026-03-08 04:12:08,540 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iuy7agcr 2026-03-08 04:12:08,541 Read config from in: /tmp/ecc_context_ecc_cfg_1_iuy7agcr/post_ecc.ini 2026-03-08 04:12:09,780 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iuy7agcr/solo_L1_stix-cal-energy_20220102_V03_ecc_in.fits 2026-03-08 04:21:08,726 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220102_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220102_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 04:21:14,879 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 04:21:14,887 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_iuy7agcr 2026-03-08 04:21:14,915 No soops found for time: 2022-01-02 07:31:28.867801 - 2022-01-02 09:55:27.882440 2026-03-08 04:21:15,009 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/02/CAL/solo_CAL_stix-cal-energy_20220102T073128-20220102T095527_V02.fits 2026-03-08 04:21:15,170 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d39uu9r6 2026-03-08 04:21:15,170 Read config from in: /tmp/ecc_context_ecc_cfg_1_d39uu9r6/post_ecc.ini 2026-03-08 04:21:16,419 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d39uu9r6/solo_L1_stix-cal-energy_20220113_V03_ecc_in.fits 2026-03-08 04:30:10,985 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220113_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220113_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 04:30:17,280 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 04:30:17,287 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d39uu9r6 2026-03-08 04:30:17,312 No soops found for time: 2022-01-13 04:32:07.459970 - 2022-01-13 06:56:06.474608 2026-03-08 04:30:17,410 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/13/CAL/solo_CAL_stix-cal-energy_20220113T043207-20220113T065606_V02.fits 2026-03-08 04:30:17,572 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6ilpzga9 2026-03-08 04:30:17,573 Read config from in: /tmp/ecc_context_ecc_cfg_1_6ilpzga9/post_ecc.ini 2026-03-08 04:30:18,824 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6ilpzga9/solo_L1_stix-cal-energy_20220115_V03_ecc_in.fits 2026-03-08 04:39:24,590 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220115_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220115_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 04:39:31,069 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 04:39:31,076 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6ilpzga9 2026-03-08 04:39:31,102 No soops found for time: 2022-01-15 04:32:15.752784 - 2022-01-15 06:56:14.767423 2026-03-08 04:39:31,197 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/15/CAL/solo_CAL_stix-cal-energy_20220115T043215-20220115T065614_V02.fits 2026-03-08 04:39:31,357 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t7e13eme 2026-03-08 04:39:31,358 Read config from in: /tmp/ecc_context_ecc_cfg_1_t7e13eme/post_ecc.ini 2026-03-08 04:39:32,607 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t7e13eme/solo_L1_stix-cal-energy_20220104_V03_ecc_in.fits 2026-03-08 04:48:30,208 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220104_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220104_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 04:48:36,659 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 04:48:36,667 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t7e13eme 2026-03-08 04:48:36,694 No soops found for time: 2022-01-04 07:41:05.161579 - 2022-01-04 10:05:05.176219 2026-03-08 04:48:36,791 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/01/04/CAL/solo_CAL_stix-cal-energy_20220104T074105-20220104T100505_V02.fits 2026-03-08 04:48:36,938 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20220601.csv 2026-03-08 04:48:36,969 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5spzjdu_ 2026-03-08 04:48:36,969 Read config from in: /tmp/ecc_context_ecc_cfg_1_5spzjdu_/post_ecc.ini 2026-03-08 04:48:38,227 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5spzjdu_/solo_L1_stix-cal-energy_20220830_V03_ecc_in.fits 2026-03-08 04:57:27,464 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220830_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220830_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220830_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220830_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 04:57:33,794 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 04:57:33,801 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5spzjdu_ 2026-03-08 04:57:33,829 No soops found for time: 2022-08-30 09:06:05.555569 - 2022-08-30 11:30:05.570570 2026-03-08 04:57:33,923 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/30/CAL/solo_CAL_stix-cal-energy_20220830T090605-20220830T113005_V02.fits 2026-03-08 04:57:34,082 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v7bhk1hg 2026-03-08 04:57:34,083 Read config from in: /tmp/ecc_context_ecc_cfg_1_v7bhk1hg/post_ecc.ini 2026-03-08 04:57:36,822 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v7bhk1hg/solo_L1_stix-cal-energy_20220810_V03_ecc_in.fits 2026-03-08 05:06:29,843 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220810_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220810_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220810_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220810_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 05:06:36,137 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 05:06:36,147 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v7bhk1hg 2026-03-08 05:06:36,177 No soops found for time: 2022-08-10 08:36:10.560179 - 2022-08-10 11:01:42.575177 2026-03-08 05:06:36,276 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/10/CAL/solo_CAL_stix-cal-energy_20220810T083610-20220810T110142_V02.fits 2026-03-08 05:06:36,446 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hmcnrguo 2026-03-08 05:06:36,447 Read config from in: /tmp/ecc_context_ecc_cfg_1_hmcnrguo/post_ecc.ini 2026-03-08 05:06:37,692 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hmcnrguo/solo_L1_stix-cal-energy_20220801_V03_ecc_in.fits 2026-03-08 05:15:27,400 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220801_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220801_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220801_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220801_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 05:15:33,589 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 05:15:33,596 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hmcnrguo 2026-03-08 05:15:33,622 No soops found for time: 2022-08-01 08:26:01.222459 - 2022-08-01 10:50:00.237274 2026-03-08 05:15:33,717 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/01/CAL/solo_CAL_stix-cal-energy_20220801T082601-20220801T105000_V02.fits 2026-03-08 05:15:33,883 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_avticy2p 2026-03-08 05:15:33,883 Read config from in: /tmp/ecc_context_ecc_cfg_1_avticy2p/post_ecc.ini 2026-03-08 05:15:35,140 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_avticy2p/solo_L1_stix-cal-energy_20220824_V03_ecc_in.fits 2026-03-08 05:24:25,903 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220824_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220824_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220824_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220824_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 05:24:32,140 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 05:24:32,147 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_avticy2p 2026-03-08 05:24:32,173 No soops found for time: 2022-08-24 09:38:39.644149 - 2022-08-24 12:02:39.658989 2026-03-08 05:24:32,268 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/24/CAL/solo_CAL_stix-cal-energy_20220824T093839-20220824T120239_V02.fits 2026-03-08 05:24:32,424 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2pxjmpwt 2026-03-08 05:24:32,425 Read config from in: /tmp/ecc_context_ecc_cfg_1_2pxjmpwt/post_ecc.ini 2026-03-08 05:24:33,668 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2pxjmpwt/solo_L1_stix-cal-energy_20220808_V03_ecc_in.fits 2026-03-08 05:33:33,606 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220808_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220808_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220808_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220808_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 05:33:40,024 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 05:33:40,031 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2pxjmpwt 2026-03-08 05:33:40,061 No soops found for time: 2022-08-08 08:36:01.262058 - 2022-08-08 11:00:00.276881 2026-03-08 05:33:40,160 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/08/CAL/solo_CAL_stix-cal-energy_20220808T083601-20220808T110000_V02.fits 2026-03-08 05:33:40,328 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mnutg8go 2026-03-08 05:33:40,329 Read config from in: /tmp/ecc_context_ecc_cfg_1_mnutg8go/post_ecc.ini 2026-03-08 05:33:41,587 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mnutg8go/solo_L1_stix-cal-energy_20220805_V03_ecc_in.fits 2026-03-08 05:42:28,605 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220805_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220805_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220805_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220805_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 05:42:34,843 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 05:42:34,850 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mnutg8go 2026-03-08 05:42:34,880 No soops found for time: 2022-08-05 08:28:52.816588 - 2022-08-05 10:53:02.831430 2026-03-08 05:42:34,975 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/05/CAL/solo_CAL_stix-cal-energy_20220805T082852-20220805T105302_V02.fits 2026-03-08 05:42:35,144 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_shp2il6f 2026-03-08 05:42:35,144 Read config from in: /tmp/ecc_context_ecc_cfg_1_shp2il6f/post_ecc.ini 2026-03-08 05:42:36,410 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_shp2il6f/solo_L1_stix-cal-energy_20220814_V03_ecc_in.fits 2026-03-08 05:51:25,283 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220814_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220814_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220814_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220814_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 05:51:32,952 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 05:51:32,959 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_shp2il6f 2026-03-08 05:51:32,984 No soops found for time: 2022-08-14 08:59:03.156117 - 2022-08-14 11:21:08.170759 2026-03-08 05:51:33,078 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/14/CAL/solo_CAL_stix-cal-energy_20220814T085903-20220814T112108_V02.fits 2026-03-08 05:51:33,235 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i690kcs7 2026-03-08 05:51:33,236 Read config from in: /tmp/ecc_context_ecc_cfg_1_i690kcs7/post_ecc.ini 2026-03-08 05:51:34,468 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i690kcs7/solo_L1_stix-cal-energy_20220820_V03_ecc_in.fits 2026-03-08 06:00:30,808 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220820_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220820_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220820_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220820_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 06:00:37,292 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 06:00:37,299 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i690kcs7 2026-03-08 06:00:37,324 No soops found for time: 2022-08-20 09:26:57.049362 - 2022-08-20 11:50:57.064202 2026-03-08 06:00:37,419 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/20/CAL/solo_CAL_stix-cal-energy_20220820T092657-20220820T115057_V02.fits 2026-03-08 06:00:37,821 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r796y5ds 2026-03-08 06:00:37,821 Read config from in: /tmp/ecc_context_ecc_cfg_1_r796y5ds/post_ecc.ini 2026-03-08 06:00:39,077 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r796y5ds/solo_L1_stix-cal-energy_20220806_V03_ecc_in.fits 2026-03-08 06:14:13,463 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220806_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220806_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220806_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220806_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 06:14:20,348 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 06:14:20,357 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r796y5ds 2026-03-08 06:14:20,386 No soops found for time: 2022-08-06 08:30:43.965024 - 2022-08-06 10:54:42.979846 2026-03-08 06:14:20,487 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/06/CAL/solo_CAL_stix-cal-energy_20220806T083043-20220806T105442_V02.fits 2026-03-08 06:14:20,923 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yzyxt4sj 2026-03-08 06:14:20,924 Read config from in: /tmp/ecc_context_ecc_cfg_1_yzyxt4sj/post_ecc.ini 2026-03-08 06:14:22,193 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yzyxt4sj/solo_L1_stix-cal-energy_20220803_V03_ecc_in.fits 2026-03-08 06:23:20,572 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220803_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220803_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220803_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220803_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 06:23:26,846 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 06:23:26,854 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yzyxt4sj 2026-03-08 06:23:26,881 No soops found for time: 2022-08-03 08:26:10.518824 - 2022-08-03 10:50:09.533640 2026-03-08 06:23:26,976 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/03/CAL/solo_CAL_stix-cal-energy_20220803T082610-20220803T105009_V02.fits 2026-03-08 06:23:27,141 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mgo5uwpv 2026-03-08 06:23:27,141 Read config from in: /tmp/ecc_context_ecc_cfg_1_mgo5uwpv/post_ecc.ini 2026-03-08 06:23:28,404 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mgo5uwpv/solo_L1_stix-cal-energy_20220817_V03_ecc_in.fits 2026-03-08 06:32:23,951 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220817_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220817_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220817_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220817_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 06:32:30,278 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 06:32:30,287 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mgo5uwpv 2026-03-08 06:32:30,313 No soops found for time: 2022-08-17 08:48:10.600181 - 2022-08-17 11:12:11.615023 2026-03-08 06:32:30,408 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/17/CAL/solo_CAL_stix-cal-energy_20220817T084810-20220817T111211_V02.fits 2026-03-08 06:32:30,841 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4dzcj5ye 2026-03-08 06:32:30,842 Read config from in: /tmp/ecc_context_ecc_cfg_1_4dzcj5ye/post_ecc.ini 2026-03-08 06:32:32,097 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4dzcj5ye/solo_L1_stix-cal-energy_20220831_V03_ecc_in.fits 2026-03-08 06:41:22,948 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220831_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220831_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220831_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220831_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 06:41:29,296 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 06:41:29,303 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4dzcj5ye 2026-03-08 06:41:29,329 No soops found for time: 2022-08-31 09:06:10.705595 - 2022-08-31 11:30:10.720596 2026-03-08 06:41:29,422 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/31/CAL/solo_CAL_stix-cal-energy_20220831T090610-20220831T113010_V02.fits 2026-03-08 06:41:29,580 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gx50quor 2026-03-08 06:41:29,580 Read config from in: /tmp/ecc_context_ecc_cfg_1_gx50quor/post_ecc.ini 2026-03-08 06:41:30,842 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gx50quor/solo_L1_stix-cal-energy_20220818_V03_ecc_in.fits 2026-03-08 06:50:12,101 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220818_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220818_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220818_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220818_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 06:50:19,775 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 06:50:19,783 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gx50quor 2026-03-08 06:50:19,809 No soops found for time: 2022-08-18 08:48:55.748654 - 2022-08-18 11:13:43.763576 2026-03-08 06:50:19,903 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/18/CAL/solo_CAL_stix-cal-energy_20220818T084855-20220818T111343_V02.fits 2026-03-08 06:50:20,332 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_87_j3fve 2026-03-08 06:50:20,333 Read config from in: /tmp/ecc_context_ecc_cfg_1_87_j3fve/post_ecc.ini 2026-03-08 06:50:21,577 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_87_j3fve/solo_L1_stix-cal-energy_20220823_V03_ecc_in.fits 2026-03-08 06:59:16,779 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220823_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220823_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220823_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220823_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 06:59:23,048 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 06:59:23,056 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_87_j3fve 2026-03-08 06:59:23,083 No soops found for time: 2022-08-23 08:56:05.491367 - 2022-08-23 11:21:27.506348 2026-03-08 06:59:23,177 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/23/CAL/solo_CAL_stix-cal-energy_20220823T085605-20220823T112127_V02.fits 2026-03-08 06:59:23,338 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sk_tjonc 2026-03-08 06:59:23,339 Read config from in: /tmp/ecc_context_ecc_cfg_1_sk_tjonc/post_ecc.ini 2026-03-08 06:59:24,588 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sk_tjonc/solo_L1_stix-cal-energy_20220816_V03_ecc_in.fits 2026-03-08 07:08:23,015 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220816_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220816_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220816_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220816_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 07:08:29,282 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 07:08:29,289 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sk_tjonc 2026-03-08 07:08:29,315 No soops found for time: 2022-08-16 08:48:06.451779 - 2022-08-16 11:12:05.466617 2026-03-08 07:08:29,410 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/16/CAL/solo_CAL_stix-cal-energy_20220816T084806-20220816T111205_V02.fits 2026-03-08 07:08:29,574 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ry04hvc7 2026-03-08 07:08:29,575 Read config from in: /tmp/ecc_context_ecc_cfg_1_ry04hvc7/post_ecc.ini 2026-03-08 07:08:30,820 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ry04hvc7/solo_L1_stix-cal-energy_20220812_V03_ecc_in.fits 2026-03-08 07:17:21,458 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220812_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220812_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220812_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220812_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 07:17:27,715 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 07:17:27,722 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ry04hvc7 2026-03-08 07:17:27,749 No soops found for time: 2022-08-12 08:58:52.859309 - 2022-08-12 11:22:52.874149 2026-03-08 07:17:27,844 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/12/CAL/solo_CAL_stix-cal-energy_20220812T085852-20220812T112252_V02.fits 2026-03-08 07:17:28,004 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nf8hwaj9 2026-03-08 07:17:28,005 Read config from in: /tmp/ecc_context_ecc_cfg_1_nf8hwaj9/post_ecc.ini 2026-03-08 07:17:29,252 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nf8hwaj9/solo_L1_stix-cal-energy_20220827_V03_ecc_in.fits 2026-03-08 07:26:17,394 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220827_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220827_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220827_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220827_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 07:26:23,663 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 07:26:23,670 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nf8hwaj9 2026-03-08 07:26:23,697 No soops found for time: 2022-08-27 09:47:13.090216 - 2022-08-27 12:11:12.105054 2026-03-08 07:26:23,791 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/27/CAL/solo_CAL_stix-cal-energy_20220827T094713-20220827T121112_V02.fits 2026-03-08 07:26:23,948 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p0w8o_kc 2026-03-08 07:26:23,948 Read config from in: /tmp/ecc_context_ecc_cfg_1_p0w8o_kc/post_ecc.ini 2026-03-08 07:26:25,194 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p0w8o_kc/solo_L1_stix-cal-energy_20220811_V03_ecc_in.fits 2026-03-08 07:35:20,336 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220811_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220811_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220811_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220811_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 07:35:28,049 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 07:35:28,057 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p0w8o_kc 2026-03-08 07:35:28,083 No soops found for time: 2022-08-11 08:58:48.710907 - 2022-08-11 11:22:47.725745 2026-03-08 07:35:28,176 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/11/CAL/solo_CAL_stix-cal-energy_20220811T085848-20220811T112247_V02.fits 2026-03-08 07:35:28,609 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6_z8ogef 2026-03-08 07:35:28,610 Read config from in: /tmp/ecc_context_ecc_cfg_1_6_z8ogef/post_ecc.ini 2026-03-08 07:35:29,865 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6_z8ogef/solo_L1_stix-cal-energy_20220826_V03_ecc_in.fits 2026-03-08 07:44:39,628 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220826_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220826_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220826_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220826_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 07:44:45,869 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 07:44:45,876 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6_z8ogef 2026-03-08 07:44:45,901 No soops found for time: 2022-08-26 09:38:48.940955 - 2022-08-26 12:03:10.955833 2026-03-08 07:44:45,993 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/26/CAL/solo_CAL_stix-cal-energy_20220826T093848-20220826T120310_V02.fits 2026-03-08 07:44:46,145 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e1521fqv 2026-03-08 07:44:46,145 Read config from in: /tmp/ecc_context_ecc_cfg_1_e1521fqv/post_ecc.ini 2026-03-08 07:44:47,386 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e1521fqv/solo_L1_stix-cal-energy_20220819_V03_ecc_in.fits 2026-03-08 07:53:32,389 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220819_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220819_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220819_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220819_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 07:53:38,709 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 07:53:38,716 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e1521fqv 2026-03-08 07:53:38,741 No soops found for time: 2022-08-19 09:26:52.900960 - 2022-08-19 11:50:51.915798 2026-03-08 07:53:38,834 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/19/CAL/solo_CAL_stix-cal-energy_20220819T092652-20220819T115051_V02.fits 2026-03-08 07:53:38,990 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eagovp7n 2026-03-08 07:53:38,990 Read config from in: /tmp/ecc_context_ecc_cfg_1_eagovp7n/post_ecc.ini 2026-03-08 07:53:40,232 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eagovp7n/solo_L1_stix-cal-energy_20220822_V03_ecc_in.fits 2026-03-08 08:02:31,256 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220822_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220822_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220822_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220822_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 08:02:38,152 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 08:02:38,160 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eagovp7n 2026-03-08 08:02:38,188 No soops found for time: 2022-08-22 08:56:01.342965 - 2022-08-22 11:20:00.357803 2026-03-08 08:02:38,289 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/22/CAL/solo_CAL_stix-cal-energy_20220822T085601-20220822T112000_V02.fits 2026-03-08 08:02:38,454 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u2_967vi 2026-03-08 08:02:38,455 Read config from in: /tmp/ecc_context_ecc_cfg_1_u2_967vi/post_ecc.ini 2026-03-08 08:02:39,734 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u2_967vi/solo_L1_stix-cal-energy_20220825_V03_ecc_in.fits 2026-03-08 08:11:26,255 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220825_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220825_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220825_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220825_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 08:11:32,507 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 08:11:32,513 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u2_967vi 2026-03-08 08:11:32,539 No soops found for time: 2022-08-25 09:38:43.792552 - 2022-08-25 12:02:43.807391 2026-03-08 08:11:32,632 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/25/CAL/solo_CAL_stix-cal-energy_20220825T093843-20220825T120243_V02.fits 2026-03-08 08:11:33,059 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vlb4yda9 2026-03-08 08:11:33,059 Read config from in: /tmp/ecc_context_ecc_cfg_1_vlb4yda9/post_ecc.ini 2026-03-08 08:11:34,297 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vlb4yda9/solo_L1_stix-cal-energy_20220809_V03_ecc_in.fits 2026-03-08 08:20:24,262 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220809_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220809_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220809_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220809_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 08:20:30,486 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 08:20:30,493 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vlb4yda9 2026-03-08 08:20:30,519 No soops found for time: 2022-08-09 08:36:05.411776 - 2022-08-09 11:00:05.426615 2026-03-08 08:20:30,612 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/09/CAL/solo_CAL_stix-cal-energy_20220809T083605-20220809T110005_V02.fits 2026-03-08 08:20:30,768 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_esstnb86 2026-03-08 08:20:30,768 Read config from in: /tmp/ecc_context_ecc_cfg_1_esstnb86/post_ecc.ini 2026-03-08 08:20:32,012 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_esstnb86/solo_L1_stix-cal-energy_20220829_V03_ecc_in.fits 2026-03-08 08:29:20,959 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220829_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220829_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220829_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220829_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 08:29:28,637 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 08:29:28,644 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_esstnb86 2026-03-08 08:29:28,668 No soops found for time: 2022-08-29 09:06:00.405543 - 2022-08-29 11:30:00.420545 2026-03-08 08:29:28,761 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/29/CAL/solo_CAL_stix-cal-energy_20220829T090600-20220829T113000_V02.fits 2026-03-08 08:29:28,919 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5156ia7k 2026-03-08 08:29:28,919 Read config from in: /tmp/ecc_context_ecc_cfg_1_5156ia7k/post_ecc.ini 2026-03-08 08:29:30,161 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5156ia7k/solo_L1_stix-cal-energy_20220802_V03_ecc_in.fits 2026-03-08 08:38:29,454 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220802_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220802_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220802_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220802_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 08:38:35,654 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 08:38:35,661 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5156ia7k 2026-03-08 08:38:35,687 No soops found for time: 2022-08-02 08:26:05.370641 - 2022-08-02 10:50:05.385458 2026-03-08 08:38:35,781 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/02/CAL/solo_CAL_stix-cal-energy_20220802T082605-20220802T105005_V02.fits 2026-03-08 08:38:35,921 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_75koa_q6 2026-03-08 08:38:35,922 Read config from in: /tmp/ecc_context_ecc_cfg_1_75koa_q6/post_ecc.ini 2026-03-08 08:38:37,185 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_75koa_q6/solo_L1_stix-cal-energy_20220813_V03_ecc_in.fits 2026-03-08 08:47:34,679 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220813_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220813_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220813_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220813_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 08:47:40,948 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 08:47:40,954 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_75koa_q6 2026-03-08 08:47:40,983 No soops found for time: 2022-08-13 08:58:58.007713 - 2022-08-13 11:22:57.022551 2026-03-08 08:47:41,082 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/13/CAL/solo_CAL_stix-cal-energy_20220813T085858-20220813T112257_V02.fits 2026-03-08 08:47:41,249 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_599u989v 2026-03-08 08:47:41,249 Read config from in: /tmp/ecc_context_ecc_cfg_1_599u989v/post_ecc.ini 2026-03-08 08:47:42,512 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_599u989v/solo_L1_stix-cal-energy_20220815_V03_ecc_in.fits 2026-03-08 08:56:35,587 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220815_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220815_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220815_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220815_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 08:56:41,875 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 08:56:41,884 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_599u989v 2026-03-08 08:56:41,918 No soops found for time: 2022-08-15 08:48:01.303375 - 2022-08-15 11:12:00.318213 2026-03-08 08:56:42,021 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/15/CAL/solo_CAL_stix-cal-energy_20220815T084801-20220815T111200_V02.fits 2026-03-08 08:56:42,183 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bxzp3g9r 2026-03-08 08:56:42,184 Read config from in: /tmp/ecc_context_ecc_cfg_1_bxzp3g9r/post_ecc.ini 2026-03-08 08:56:43,437 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bxzp3g9r/solo_L1_stix-cal-energy_20220804_V03_ecc_in.fits 2026-03-08 09:05:44,832 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220804_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220804_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220804_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220804_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 09:05:51,099 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 09:05:51,107 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bxzp3g9r 2026-03-08 09:05:51,133 No soops found for time: 2022-08-04 08:26:15.667008 - 2022-08-04 10:50:20.681834 2026-03-08 09:05:51,227 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/08/04/CAL/solo_CAL_stix-cal-energy_20220804T082615-20220804T105020_V02.fits 2026-03-08 09:05:51,613 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a5ebelj3 2026-03-08 09:05:51,614 Read config from in: /tmp/ecc_context_ecc_cfg_1_a5ebelj3/post_ecc.ini 2026-03-08 09:05:52,937 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a5ebelj3/solo_L1_stix-cal-energy_20220530_V03_ecc_in.fits 2026-03-08 09:14:39,575 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220530_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220530_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220530_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220530_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 09:14:46,477 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 09:14:46,484 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a5ebelj3 2026-03-08 09:14:46,514 No soops found for time: 2022-05-30 07:56:00.918338 - 2022-05-30 10:20:00.933100 2026-03-08 09:14:46,625 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/30/CAL/solo_CAL_stix-cal-energy_20220530T075600-20220530T102000_V02.fits 2026-03-08 09:14:48,455 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d7oqq8cs 2026-03-08 09:14:48,456 Read config from in: /tmp/ecc_context_ecc_cfg_1_d7oqq8cs/post_ecc.ini 2026-03-08 09:14:49,709 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d7oqq8cs/solo_L1_stix-cal-energy_20220510_V03_ecc_in.fits 2026-03-08 09:23:47,722 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220510_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220510_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220510_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220510_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 09:23:53,956 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 09:23:53,963 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d7oqq8cs 2026-03-08 09:23:53,989 No soops found for time: 2022-05-10 10:07:38.965071 - 2022-05-10 12:32:19.980001 2026-03-08 09:23:54,087 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/10/CAL/solo_CAL_stix-cal-energy_20220510T100738-20220510T123219_V02.fits 2026-03-08 09:23:54,250 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yvdvp_ln 2026-03-08 09:23:54,250 Read config from in: /tmp/ecc_context_ecc_cfg_1_yvdvp_ln/post_ecc.ini 2026-03-08 09:23:55,489 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yvdvp_ln/solo_L1_stix-cal-energy_20220524_V03_ecc_in.fits 2026-03-08 09:32:45,976 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220524_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220524_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220524_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220524_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 09:32:52,213 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 09:32:52,221 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yvdvp_ln 2026-03-08 09:32:52,248 No soops found for time: 2022-05-24 07:46:06.031363 - 2022-05-24 10:10:05.046180 2026-03-08 09:32:52,350 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/24/CAL/solo_CAL_stix-cal-energy_20220524T074606-20220524T101005_V02.fits 2026-03-08 09:32:52,509 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hcnyrgur 2026-03-08 09:32:52,509 Read config from in: /tmp/ecc_context_ecc_cfg_1_hcnyrgur/post_ecc.ini 2026-03-08 09:32:53,780 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hcnyrgur/solo_L1_stix-cal-energy_20220505_V03_ecc_in.fits 2026-03-08 09:41:53,219 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220505_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220505_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220505_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220505_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 09:41:59,443 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 09:41:59,450 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hcnyrgur 2026-03-08 09:41:59,475 No soops found for time: 2022-05-05 07:21:16.204941 - 2022-05-05 09:45:15.219799 2026-03-08 09:41:59,569 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/05/CAL/solo_CAL_stix-cal-energy_20220505T072116-20220505T094515_V02.fits 2026-03-08 09:41:59,726 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ektphqya 2026-03-08 09:41:59,726 Read config from in: /tmp/ecc_context_ecc_cfg_1_ektphqya/post_ecc.ini 2026-03-08 09:42:00,967 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ektphqya/solo_L1_stix-cal-energy_20220514_V03_ecc_in.fits 2026-03-08 09:50:51,242 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220514_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220514_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220514_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220514_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 09:50:57,522 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 09:50:57,530 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ektphqya 2026-03-08 09:50:57,556 No soops found for time: 2022-05-14 13:39:15.581276 - 2022-05-14 16:03:14.596133 2026-03-08 09:50:57,650 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/14/CAL/solo_CAL_stix-cal-energy_20220514T133915-20220514T160314_V02.fits 2026-03-08 09:50:57,808 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_79p6tol7 2026-03-08 09:50:57,809 Read config from in: /tmp/ecc_context_ecc_cfg_1_79p6tol7/post_ecc.ini 2026-03-08 09:50:59,054 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_79p6tol7/solo_L1_stix-cal-energy_20220507_V03_ecc_in.fits 2026-03-08 09:59:50,809 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220507_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220507_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220507_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220507_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 09:59:57,088 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 09:59:57,094 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_79p6tol7 2026-03-08 09:59:57,120 No soops found for time: 2022-05-07 07:21:23.502138 - 2022-05-07 09:45:23.516997 2026-03-08 09:59:57,215 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/07/CAL/solo_CAL_stix-cal-energy_20220507T072123-20220507T094523_V02.fits 2026-03-08 09:59:57,373 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_satywvoe 2026-03-08 09:59:57,373 Read config from in: /tmp/ecc_context_ecc_cfg_1_satywvoe/post_ecc.ini 2026-03-08 09:59:58,617 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_satywvoe/solo_L1_stix-cal-energy_20220520_V03_ecc_in.fits 2026-03-08 10:08:49,136 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220520_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220520_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220520_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220520_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 10:08:57,590 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 10:08:57,597 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_satywvoe 2026-03-08 10:08:57,625 No soops found for time: 2022-05-20 10:56:13.459455 - 2022-05-20 13:28:33.475197 2026-03-08 10:08:57,726 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/20/CAL/solo_CAL_stix-cal-energy_20220520T105613-20220520T132833_V02.fits 2026-03-08 10:08:57,893 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_28wdbe24 2026-03-08 10:08:57,894 Read config from in: /tmp/ecc_context_ecc_cfg_1_28wdbe24/post_ecc.ini 2026-03-08 10:08:59,177 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_28wdbe24/solo_L1_stix-cal-energy_20220506_V03_ecc_in.fits 2026-03-08 10:17:49,809 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220506_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220506_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220506_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220506_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 10:17:56,019 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 10:17:56,028 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_28wdbe24 2026-03-08 10:17:56,057 No soops found for time: 2022-05-06 07:21:20.353541 - 2022-05-06 09:45:19.368398 2026-03-08 10:17:56,159 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/06/CAL/solo_CAL_stix-cal-energy_20220506T072120-20220506T094519_V02.fits 2026-03-08 10:17:56,320 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8750tubw 2026-03-08 10:17:56,320 Read config from in: /tmp/ecc_context_ecc_cfg_1_8750tubw/post_ecc.ini 2026-03-08 10:17:57,560 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8750tubw/solo_L1_stix-cal-energy_20220503_V03_ecc_in.fits 2026-03-08 10:26:44,956 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220503_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220503_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220503_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220503_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 10:26:51,224 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 10:26:51,231 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8750tubw 2026-03-08 10:26:51,257 No soops found for time: 2022-05-03 07:21:05.908535 - 2022-05-03 09:45:04.923433 2026-03-08 10:26:51,352 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/03/CAL/solo_CAL_stix-cal-energy_20220503T072105-20220503T094504_V02.fits 2026-03-08 10:26:51,511 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hqqyagvo 2026-03-08 10:26:51,512 Read config from in: /tmp/ecc_context_ecc_cfg_1_hqqyagvo/post_ecc.ini 2026-03-08 10:26:52,769 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hqqyagvo/solo_L1_stix-cal-energy_20220517_V03_ecc_in.fits 2026-03-08 10:35:41,481 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220517_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220517_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220517_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220517_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 10:35:47,674 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 10:35:47,681 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hqqyagvo 2026-03-08 10:35:47,706 No soops found for time: 2022-05-17 07:36:05.992358 - 2022-05-17 10:00:05.007236 2026-03-08 10:35:47,801 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/17/CAL/solo_CAL_stix-cal-energy_20220517T073605-20220517T100005_V02.fits 2026-03-08 10:35:47,960 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e_vghn_m 2026-03-08 10:35:47,960 Read config from in: /tmp/ecc_context_ecc_cfg_1_e_vghn_m/post_ecc.ini 2026-03-08 10:35:49,199 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e_vghn_m/solo_L1_stix-cal-energy_20220531_V03_ecc_in.fits 2026-03-08 10:44:41,709 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220531_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220531_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220531_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220531_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 10:44:47,991 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 10:44:47,997 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e_vghn_m 2026-03-08 10:44:48,023 No soops found for time: 2022-05-31 07:56:06.065963 - 2022-05-31 09:32:29.075843 2026-03-08 10:44:48,116 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/31/CAL/solo_CAL_stix-cal-energy_20220531T075606-20220531T093229_V02.fits 2026-03-08 10:44:48,273 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ewaj98fj 2026-03-08 10:44:48,274 Read config from in: /tmp/ecc_context_ecc_cfg_1_ewaj98fj/post_ecc.ini 2026-03-08 10:44:49,525 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ewaj98fj/solo_L1_stix-cal-energy_20220518_V03_ecc_in.fits 2026-03-08 10:53:42,646 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220518_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220518_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220518_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220518_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 10:53:48,857 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 10:53:48,864 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ewaj98fj 2026-03-08 10:53:48,889 No soops found for time: 2022-05-18 07:36:10.141171 - 2022-05-18 10:00:10.156051 2026-03-08 10:53:48,983 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/18/CAL/solo_CAL_stix-cal-energy_20220518T073610-20220518T100010_V02.fits 2026-03-08 10:53:50,540 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vu88wsd4 2026-03-08 10:53:50,541 Read config from in: /tmp/ecc_context_ecc_cfg_1_vu88wsd4/post_ecc.ini 2026-03-08 10:53:51,775 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vu88wsd4/solo_L1_stix-cal-energy_20220523_V03_ecc_in.fits 2026-03-08 11:02:37,665 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220523_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220523_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220523_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220523_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 11:02:43,827 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 11:02:43,834 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vu88wsd4 2026-03-08 11:02:43,859 No soops found for time: 2022-05-23 07:46:00.883165 - 2022-05-23 10:10:00.897984 2026-03-08 11:02:43,952 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/23/CAL/solo_CAL_stix-cal-energy_20220523T074600-20220523T101000_V02.fits 2026-03-08 11:02:44,111 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dy6mrtx7 2026-03-08 11:02:44,111 Read config from in: /tmp/ecc_context_ecc_cfg_1_dy6mrtx7/post_ecc.ini 2026-03-08 11:02:45,400 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dy6mrtx7/solo_L1_stix-cal-energy_20220516_V03_ecc_in.fits 2026-03-08 11:11:25,940 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220516_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220516_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220516_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220516_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 11:11:32,152 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 11:11:32,160 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dy6mrtx7 2026-03-08 11:11:32,185 No soops found for time: 2022-05-16 07:36:00.843543 - 2022-05-16 09:59:59.858422 2026-03-08 11:11:32,278 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/16/CAL/solo_CAL_stix-cal-energy_20220516T073600-20220516T095959_V02.fits 2026-03-08 11:11:32,433 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r6zra9do 2026-03-08 11:11:32,433 Read config from in: /tmp/ecc_context_ecc_cfg_1_r6zra9do/post_ecc.ini 2026-03-08 11:11:33,679 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r6zra9do/solo_L1_stix-cal-energy_20220521_V03_ecc_in.fits 2026-03-08 11:20:20,861 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220521_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220521_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220521_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220521_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 11:20:27,133 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 11:20:27,141 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r6zra9do 2026-03-08 11:20:27,168 No soops found for time: 2022-05-21 15:05:37.632028 - 2022-05-21 17:29:37.646847 2026-03-08 11:20:27,262 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/21/CAL/solo_CAL_stix-cal-energy_20220521T150537-20220521T172937_V02.fits 2026-03-08 11:20:27,417 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oz6wiapx 2026-03-08 11:20:27,418 Read config from in: /tmp/ecc_context_ecc_cfg_1_oz6wiapx/post_ecc.ini 2026-03-08 11:20:28,663 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oz6wiapx/solo_L1_stix-cal-energy_20220512_V03_ecc_in.fits 2026-03-08 11:29:15,512 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220512_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220512_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220512_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220512_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 11:29:21,735 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 11:29:21,742 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oz6wiapx 2026-03-08 11:29:21,768 No soops found for time: 2022-05-12 13:23:41.282484 - 2022-05-12 15:47:41.297344 2026-03-08 11:29:21,863 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/12/CAL/solo_CAL_stix-cal-energy_20220512T132341-20220512T154741_V02.fits 2026-03-08 11:29:22,020 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kv6_gu_v 2026-03-08 11:29:22,020 Read config from in: /tmp/ecc_context_ecc_cfg_1_kv6_gu_v/post_ecc.ini 2026-03-08 11:29:23,267 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kv6_gu_v/solo_L1_stix-cal-energy_20220527_V03_ecc_in.fits 2026-03-08 11:38:14,441 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220527_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220527_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220527_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220527_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 11:38:20,684 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 11:38:20,692 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kv6_gu_v 2026-03-08 11:38:20,720 No soops found for time: 2022-05-27 08:11:48.477110 - 2022-05-27 10:44:02.492715 2026-03-08 11:38:20,815 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/27/CAL/solo_CAL_stix-cal-energy_20220527T081148-20220527T104402_V02.fits 2026-03-08 11:38:20,970 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cm84tzn7 2026-03-08 11:38:20,971 Read config from in: /tmp/ecc_context_ecc_cfg_1_cm84tzn7/post_ecc.ini 2026-03-08 11:38:22,220 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cm84tzn7/solo_L1_stix-cal-energy_20220511_V03_ecc_in.fits 2026-03-08 11:47:05,497 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220511_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220511_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220511_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220511_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 11:47:13,103 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 11:47:13,110 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cm84tzn7 2026-03-08 11:47:13,134 No soops found for time: 2022-05-11 13:23:36.133883 - 2022-05-11 15:47:36.148743 2026-03-08 11:47:13,228 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/11/CAL/solo_CAL_stix-cal-energy_20220511T132336-20220511T154736_V02.fits 2026-03-08 11:47:13,388 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kll6ji97 2026-03-08 11:47:13,388 Read config from in: /tmp/ecc_context_ecc_cfg_1_kll6ji97/post_ecc.ini 2026-03-08 11:47:14,630 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kll6ji97/solo_L1_stix-cal-energy_20220526_V03_ecc_in.fits 2026-03-08 11:56:15,749 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220526_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220526_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220526_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220526_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 11:56:22,061 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 11:56:22,068 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kll6ji97 2026-03-08 11:56:22,093 No soops found for time: 2022-05-26 07:46:15.327756 - 2022-05-26 10:12:06.342765 2026-03-08 11:56:22,188 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/26/CAL/solo_CAL_stix-cal-energy_20220526T074615-20220526T101206_V02.fits 2026-03-08 11:56:22,351 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xbo2158z 2026-03-08 11:56:22,352 Read config from in: /tmp/ecc_context_ecc_cfg_1_xbo2158z/post_ecc.ini 2026-03-08 11:56:23,599 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xbo2158z/solo_L1_stix-cal-energy_20220519_V03_ecc_in.fits 2026-03-08 12:05:22,070 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220519_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220519_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220519_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220519_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 12:05:28,582 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 12:05:28,592 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xbo2158z 2026-03-08 12:05:28,618 No soops found for time: 2022-05-19 07:36:15.289985 - 2022-05-19 10:05:50.305443 2026-03-08 12:05:28,711 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/19/CAL/solo_CAL_stix-cal-energy_20220519T073615-20220519T100550_V02.fits 2026-03-08 12:05:28,874 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wn3nowit 2026-03-08 12:05:28,874 Read config from in: /tmp/ecc_context_ecc_cfg_1_wn3nowit/post_ecc.ini 2026-03-08 12:05:30,131 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wn3nowit/solo_L1_stix-cal-energy_20220525_V03_ecc_in.fits 2026-03-08 12:14:17,193 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220525_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220525_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220525_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220525_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 12:14:23,408 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 12:14:23,415 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wn3nowit 2026-03-08 12:14:23,441 No soops found for time: 2022-05-25 07:46:11.179560 - 2022-05-25 10:10:10.194378 2026-03-08 12:14:23,538 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/25/CAL/solo_CAL_stix-cal-energy_20220525T074611-20220525T101010_V02.fits 2026-03-08 12:14:23,700 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hgxj7jc7 2026-03-08 12:14:23,701 Read config from in: /tmp/ecc_context_ecc_cfg_1_hgxj7jc7/post_ecc.ini 2026-03-08 12:14:24,955 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hgxj7jc7/solo_L1_stix-cal-energy_20220528_V03_ecc_in.fits 2026-03-08 12:23:17,116 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220528_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220528_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220528_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220528_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 12:23:23,354 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 12:23:23,361 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hgxj7jc7 2026-03-08 12:23:23,388 No soops found for time: 2022-05-28 10:11:14.636969 - 2022-05-28 12:35:13.651729 2026-03-08 12:23:23,484 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/28/CAL/solo_CAL_stix-cal-energy_20220528T101114-20220528T123513_V02.fits 2026-03-08 12:23:23,646 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tfkdllu7 2026-03-08 12:23:23,647 Read config from in: /tmp/ecc_context_ecc_cfg_1_tfkdllu7/post_ecc.ini 2026-03-08 12:23:24,904 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tfkdllu7/solo_L1_stix-cal-energy_20220509_V03_ecc_in.fits 2026-03-08 12:32:11,151 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220509_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220509_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220509_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220509_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 12:32:17,397 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 12:32:17,404 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tfkdllu7 2026-03-08 12:32:17,430 No soops found for time: 2022-05-09 07:26:00.799800 - 2022-05-09 09:57:08.815395 2026-03-08 12:32:17,524 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/09/CAL/solo_CAL_stix-cal-energy_20220509T072600-20220509T095708_V02.fits 2026-03-08 12:32:17,682 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m4n4uivc 2026-03-08 12:32:17,683 Read config from in: /tmp/ecc_context_ecc_cfg_1_m4n4uivc/post_ecc.ini 2026-03-08 12:32:20,398 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m4n4uivc/solo_L1_stix-cal-energy_20220502_V03_ecc_in.fits 2026-03-08 12:40:58,211 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220502_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220502_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220502_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220502_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 12:41:04,398 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 12:41:04,406 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m4n4uivc 2026-03-08 12:41:04,433 No soops found for time: 2022-05-02 07:21:00.759525 - 2022-05-02 09:45:00.774425 2026-03-08 12:41:04,528 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/02/CAL/solo_CAL_stix-cal-energy_20220502T072100-20220502T094500_V02.fits 2026-03-08 12:41:04,975 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ri950bac 2026-03-08 12:41:04,976 Read config from in: /tmp/ecc_context_ecc_cfg_1_ri950bac/post_ecc.ini 2026-03-08 12:41:06,223 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ri950bac/solo_L1_stix-cal-energy_20220513_V03_ecc_in.fits 2026-03-08 12:49:47,309 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220513_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220513_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220513_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220513_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 12:49:53,530 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 12:49:53,537 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ri950bac 2026-03-08 12:49:53,562 No soops found for time: 2022-05-13 13:23:46.431085 - 2022-05-13 15:49:18.446103 2026-03-08 12:49:53,657 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/13/CAL/solo_CAL_stix-cal-energy_20220513T132346-20220513T154918_V02.fits 2026-03-08 12:49:53,821 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z_84nd5t 2026-03-08 12:49:53,821 Read config from in: /tmp/ecc_context_ecc_cfg_1_z_84nd5t/post_ecc.ini 2026-03-08 12:49:55,067 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z_84nd5t/solo_L1_stix-cal-energy_20220504_V03_ecc_in.fits 2026-03-08 12:58:43,509 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220504_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220504_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220504_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220504_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 12:58:49,818 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 12:58:49,825 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z_84nd5t 2026-03-08 12:58:49,851 No soops found for time: 2022-05-04 07:21:11.057545 - 2022-05-04 09:45:10.072444 2026-03-08 12:58:49,946 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/05/04/CAL/solo_CAL_stix-cal-energy_20220504T072111-20220504T094510_V02.fits 2026-03-08 12:58:50,109 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sx128khx 2026-03-08 12:58:50,109 Read config from in: /tmp/ecc_context_ecc_cfg_1_sx128khx/post_ecc.ini 2026-03-08 12:58:51,358 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sx128khx/solo_L1_stix-cal-energy_20220730_V03_ecc_in.fits 2026-03-08 13:07:59,002 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220730_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220730_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220730_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220730_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 13:08:05,243 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 13:08:05,249 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sx128khx 2026-03-08 13:08:05,277 No soops found for time: 2022-07-30 09:09:41.930604 - 2022-07-30 11:33:40.945419 2026-03-08 13:08:05,375 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/30/CAL/solo_CAL_stix-cal-energy_20220730T090941-20220730T113340_V02.fits 2026-03-08 13:08:05,533 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ban5hemw 2026-03-08 13:08:05,533 Read config from in: /tmp/ecc_context_ecc_cfg_1_ban5hemw/post_ecc.ini 2026-03-08 13:08:06,791 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ban5hemw/solo_L1_stix-cal-energy_20220710_V03_ecc_in.fits 2026-03-08 13:17:06,385 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220710_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220710_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220710_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220710_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 13:17:12,688 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 13:17:12,694 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ban5hemw 2026-03-08 13:17:12,721 No soops found for time: 2022-07-10 18:37:00.016393 - 2022-07-10 19:56:18.024386 2026-03-08 13:17:12,816 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/10/CAL/solo_CAL_stix-cal-energy_20220710T183700-20220710T195618_V02.fits 2026-03-08 13:17:12,975 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1ji7dwtt 2026-03-08 13:17:12,975 Read config from in: /tmp/ecc_context_ecc_cfg_1_1ji7dwtt/post_ecc.ini 2026-03-08 13:17:14,231 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1ji7dwtt/solo_L1_stix-cal-energy_20220701_V03_ecc_in.fits 2026-03-08 13:26:05,004 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220701_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220701_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220701_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220701_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 13:26:12,895 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 13:26:12,903 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1ji7dwtt 2026-03-08 13:26:12,928 No soops found for time: 2022-07-01 01:36:05.600069 - 2022-07-01 04:00:04.614823 2026-03-08 13:26:13,023 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/01/CAL/solo_CAL_stix-cal-energy_20220701T013605-20220701T040004_V02.fits 2026-03-08 13:26:13,184 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uyc6dus1 2026-03-08 13:26:13,185 Read config from in: /tmp/ecc_context_ecc_cfg_1_uyc6dus1/post_ecc.ini 2026-03-08 13:26:14,425 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uyc6dus1/solo_L1_stix-cal-energy_20220708_V03_ecc_in.fits 2026-03-08 13:35:00,465 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220708_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220708_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220708_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220708_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 13:35:06,775 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 13:35:06,781 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uyc6dus1 2026-03-08 13:35:06,807 No soops found for time: 2022-07-08 18:34:19.725829 - 2022-07-08 20:58:20.740346 2026-03-08 13:35:06,902 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/08/CAL/solo_CAL_stix-cal-energy_20220708T183419-20220708T205820_V02.fits 2026-03-08 13:35:07,069 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_czep7if9 2026-03-08 13:35:07,070 Read config from in: /tmp/ecc_context_ecc_cfg_1_czep7if9/post_ecc.ini 2026-03-08 13:35:08,319 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_czep7if9/solo_L1_stix-cal-energy_20220705_V03_ecc_in.fits 2026-03-08 13:43:44,013 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220705_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220705_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220705_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220705_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 13:43:50,179 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 13:43:50,186 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_czep7if9 2026-03-08 13:43:50,212 No soops found for time: 2022-07-05 18:34:05.290364 - 2022-07-05 20:58:04.304877 2026-03-08 13:43:50,307 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/05/CAL/solo_CAL_stix-cal-energy_20220705T183405-20220705T205804_V02.fits 2026-03-08 13:43:50,465 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vxykveac 2026-03-08 13:43:50,465 Read config from in: /tmp/ecc_context_ecc_cfg_1_vxykveac/post_ecc.ini 2026-03-08 13:43:51,719 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vxykveac/solo_L1_stix-cal-energy_20220714_V03_ecc_in.fits 2026-03-08 13:52:38,027 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220714_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220714_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220714_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220714_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 13:52:44,318 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 13:52:44,326 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vxykveac 2026-03-08 13:52:44,351 No soops found for time: 2022-07-14 07:58:14.532597 - 2022-07-14 10:22:13.547110 2026-03-08 13:52:44,446 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/14/CAL/solo_CAL_stix-cal-energy_20220714T075814-20220714T102213_V02.fits 2026-03-08 13:52:44,877 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9o7o09b_ 2026-03-08 13:52:44,878 Read config from in: /tmp/ecc_context_ecc_cfg_1_9o7o09b_/post_ecc.ini 2026-03-08 13:52:46,117 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9o7o09b_/solo_L1_stix-cal-energy_20220707_V03_ecc_in.fits 2026-03-08 14:01:30,969 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220707_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220707_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220707_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220707_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 14:01:37,281 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 14:01:37,289 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9o7o09b_ 2026-03-08 14:01:37,317 No soops found for time: 2022-07-07 18:34:14.580674 - 2022-07-07 20:58:14.595188 2026-03-08 14:01:37,415 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/07/CAL/solo_CAL_stix-cal-energy_20220707T183414-20220707T205814_V02.fits 2026-03-08 14:01:37,577 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jbvbd3so 2026-03-08 14:01:37,578 Read config from in: /tmp/ecc_context_ecc_cfg_1_jbvbd3so/post_ecc.ini 2026-03-08 14:01:38,833 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jbvbd3so/solo_L1_stix-cal-energy_20220720_V03_ecc_in.fits 2026-03-08 14:10:32,958 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220720_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220720_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220720_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220720_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 14:10:39,385 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 14:10:39,394 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jbvbd3so 2026-03-08 14:10:39,423 No soops found for time: 2022-07-20 08:11:46.444218 - 2022-07-20 10:35:59.459061 2026-03-08 14:10:39,522 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/20/CAL/solo_CAL_stix-cal-energy_20220720T081146-20220720T103559_V02.fits 2026-03-08 14:10:39,694 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8jfcho4d 2026-03-08 14:10:39,695 Read config from in: /tmp/ecc_context_ecc_cfg_1_8jfcho4d/post_ecc.ini 2026-03-08 14:10:40,988 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8jfcho4d/solo_L1_stix-cal-energy_20220706_V03_ecc_in.fits 2026-03-08 14:19:24,075 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220706_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220706_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220706_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220706_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 14:19:31,691 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 14:19:31,700 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8jfcho4d 2026-03-08 14:19:31,725 No soops found for time: 2022-07-06 18:34:10.435520 - 2022-07-06 20:58:09.450033 2026-03-08 14:19:31,820 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/06/CAL/solo_CAL_stix-cal-energy_20220706T183410-20220706T205809_V02.fits 2026-03-08 14:19:31,980 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s9u8kk94 2026-03-08 14:19:31,981 Read config from in: /tmp/ecc_context_ecc_cfg_1_s9u8kk94/post_ecc.ini 2026-03-08 14:19:33,216 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s9u8kk94/solo_L1_stix-cal-energy_20220703_V03_ecc_in.fits 2026-03-08 14:28:23,932 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220703_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220703_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220703_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220703_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 14:28:30,199 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 14:28:30,211 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s9u8kk94 2026-03-08 14:28:30,237 No soops found for time: 2022-07-03 01:36:14.895198 - 2022-07-03 03:49:36.908864 2026-03-08 14:28:30,335 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/03/CAL/solo_CAL_stix-cal-energy_20220703T013614-20220703T034936_V02.fits 2026-03-08 14:28:30,497 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8qy_n1vh 2026-03-08 14:28:30,497 Read config from in: /tmp/ecc_context_ecc_cfg_1_8qy_n1vh/post_ecc.ini 2026-03-08 14:28:31,745 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8qy_n1vh/solo_L1_stix-cal-energy_20220717_V03_ecc_in.fits 2026-03-08 14:37:17,875 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220717_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220717_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220717_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220717_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 14:37:24,116 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 14:37:24,122 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8qy_n1vh 2026-03-08 14:37:24,149 No soops found for time: 2022-07-17 07:58:27.998219 - 2022-07-17 10:22:28.013040 2026-03-08 14:37:24,245 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/17/CAL/solo_CAL_stix-cal-energy_20220717T075827-20220717T102228_V02.fits 2026-03-08 14:37:24,406 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ttlx1wte 2026-03-08 14:37:24,407 Read config from in: /tmp/ecc_context_ecc_cfg_1_ttlx1wte/post_ecc.ini 2026-03-08 14:37:25,668 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ttlx1wte/solo_L1_stix-cal-energy_20220718_V03_ecc_in.fits 2026-03-08 14:46:16,205 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220718_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220718_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220718_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220718_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 14:46:22,483 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 14:46:22,490 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ttlx1wte 2026-03-08 14:46:22,517 No soops found for time: 2022-07-18 08:06:01.147206 - 2022-07-18 10:30:00.162025 2026-03-08 14:46:22,613 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/18/CAL/solo_CAL_stix-cal-energy_20220718T080601-20220718T103000_V02.fits 2026-03-08 14:46:22,775 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dwmvffse 2026-03-08 14:46:22,775 Read config from in: /tmp/ecc_context_ecc_cfg_1_dwmvffse/post_ecc.ini 2026-03-08 14:46:24,039 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dwmvffse/solo_L1_stix-cal-energy_20220723_V03_ecc_in.fits 2026-03-08 14:55:08,856 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220723_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220723_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220723_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220723_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 14:55:15,104 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 14:55:15,111 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dwmvffse 2026-03-08 14:55:15,137 No soops found for time: 2022-07-23 08:18:40.888130 - 2022-07-23 10:42:39.902946 2026-03-08 14:55:15,231 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/23/CAL/solo_CAL_stix-cal-energy_20220723T081840-20220723T104239_V02.fits 2026-03-08 14:55:15,383 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4rcsnlpb 2026-03-08 14:55:15,384 Read config from in: /tmp/ecc_context_ecc_cfg_1_4rcsnlpb/post_ecc.ini 2026-03-08 14:55:16,641 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4rcsnlpb/solo_L1_stix-cal-energy_20220716_V03_ecc_in.fits 2026-03-08 15:04:14,959 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220716_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220716_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220716_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220716_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 15:04:22,682 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 15:04:22,689 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4rcsnlpb 2026-03-08 15:04:22,714 No soops found for time: 2022-07-16 07:58:23.850002 - 2022-07-16 10:22:22.864822 2026-03-08 15:04:22,809 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/16/CAL/solo_CAL_stix-cal-energy_20220716T075823-20220716T102222_V02.fits 2026-03-08 15:04:22,969 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qfm3ftp7 2026-03-08 15:04:22,970 Read config from in: /tmp/ecc_context_ecc_cfg_1_qfm3ftp7/post_ecc.ini 2026-03-08 15:04:24,202 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qfm3ftp7/solo_L1_stix-cal-energy_20220721_V03_ecc_in.fits 2026-03-08 15:13:07,338 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220721_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220721_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220721_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220721_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 15:13:13,606 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 15:13:13,613 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qfm3ftp7 2026-03-08 15:13:13,638 No soops found for time: 2022-07-21 08:18:31.591765 - 2022-07-21 10:42:30.606580 2026-03-08 15:13:13,733 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/21/CAL/solo_CAL_stix-cal-energy_20220721T081831-20220721T104230_V02.fits 2026-03-08 15:13:13,902 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g0e77ybx 2026-03-08 15:13:13,902 Read config from in: /tmp/ecc_context_ecc_cfg_1_g0e77ybx/post_ecc.ini 2026-03-08 15:13:15,152 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g0e77ybx/solo_L1_stix-cal-energy_20220712_V03_ecc_in.fits 2026-03-08 15:22:03,310 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220712_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220712_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220712_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220712_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 15:22:09,484 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 15:22:09,491 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g0e77ybx 2026-03-08 15:22:09,516 No soops found for time: 2022-07-12 07:58:04.242285 - 2022-07-12 10:22:04.256800 2026-03-08 15:22:09,612 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/12/CAL/solo_CAL_stix-cal-energy_20220712T075804-20220712T102204_V02.fits 2026-03-08 15:22:09,769 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_17srqdai 2026-03-08 15:22:09,769 Read config from in: /tmp/ecc_context_ecc_cfg_1_17srqdai/post_ecc.ini 2026-03-08 15:22:11,013 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_17srqdai/solo_L1_stix-cal-energy_20220727_V03_ecc_in.fits 2026-03-08 15:31:11,438 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220727_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220727_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220727_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220727_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 15:31:17,851 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 15:31:17,859 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_17srqdai 2026-03-08 15:31:17,886 No soops found for time: 2022-07-27 08:57:08.484787 - 2022-07-27 11:21:07.499603 2026-03-08 15:31:17,983 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/27/CAL/solo_CAL_stix-cal-energy_20220727T085708-20220727T112107_V02.fits 2026-03-08 15:31:18,428 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4bjxmtuo 2026-03-08 15:31:18,429 Read config from in: /tmp/ecc_context_ecc_cfg_1_4bjxmtuo/post_ecc.ini 2026-03-08 15:31:19,754 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4bjxmtuo/solo_L1_stix-cal-energy_20220711_V03_ecc_in.fits 2026-03-08 15:40:11,327 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220711_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220711_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220711_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220711_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 15:40:17,566 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 15:40:17,573 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4bjxmtuo 2026-03-08 15:40:17,600 No soops found for time: 2022-07-11 07:58:01.097133 - 2022-07-11 10:22:00.111646 2026-03-08 15:40:17,696 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/11/CAL/solo_CAL_stix-cal-energy_20220711T075801-20220711T102200_V02.fits 2026-03-08 15:40:17,861 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4z30hy47 2026-03-08 15:40:17,862 Read config from in: /tmp/ecc_context_ecc_cfg_1_4z30hy47/post_ecc.ini 2026-03-08 15:40:19,114 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4z30hy47/solo_L1_stix-cal-energy_20220726_V03_ecc_in.fits 2026-03-08 15:49:02,445 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220726_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220726_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220726_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220726_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 15:49:08,796 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 15:49:08,804 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4z30hy47 2026-03-08 15:49:08,831 No soops found for time: 2022-07-26 08:16:05.332388 - 2022-07-26 10:40:40.347265 2026-03-08 15:49:08,925 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/26/CAL/solo_CAL_stix-cal-energy_20220726T081605-20220726T104040_V02.fits 2026-03-08 15:49:09,082 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_88m9grbs 2026-03-08 15:49:09,082 Read config from in: /tmp/ecc_context_ecc_cfg_1_88m9grbs/post_ecc.ini 2026-03-08 15:49:10,335 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_88m9grbs/solo_L1_stix-cal-energy_20220719_V03_ecc_in.fits 2026-03-08 15:57:54,176 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220719_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220719_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220719_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220719_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 15:58:01,844 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 15:58:01,853 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_88m9grbs 2026-03-08 15:58:01,879 No soops found for time: 2022-07-19 08:06:05.295423 - 2022-07-19 10:30:32.310290 2026-03-08 15:58:01,974 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/19/CAL/solo_CAL_stix-cal-energy_20220719T080605-20220719T103032_V02.fits 2026-03-08 15:58:02,135 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p5sh6gv6 2026-03-08 15:58:02,136 Read config from in: /tmp/ecc_context_ecc_cfg_1_p5sh6gv6/post_ecc.ini 2026-03-08 15:58:03,384 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p5sh6gv6/solo_L1_stix-cal-energy_20220722_V03_ecc_in.fits 2026-03-08 16:06:59,640 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220722_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220722_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220722_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220722_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 16:07:05,950 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 16:07:05,960 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p5sh6gv6 2026-03-08 16:07:05,987 No soops found for time: 2022-07-22 08:18:35.739947 - 2022-07-22 10:42:35.754764 2026-03-08 16:07:06,080 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/22/CAL/solo_CAL_stix-cal-energy_20220722T081835-20220722T104235_V02.fits 2026-03-08 16:07:06,246 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jf1i0mn8 2026-03-08 16:07:06,247 Read config from in: /tmp/ecc_context_ecc_cfg_1_jf1i0mn8/post_ecc.ini 2026-03-08 16:07:07,491 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jf1i0mn8/solo_L1_stix-cal-energy_20220725_V03_ecc_in.fits 2026-03-08 16:15:51,258 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220725_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220725_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220725_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220725_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 16:15:57,503 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 16:15:57,510 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jf1i0mn8 2026-03-08 16:15:57,536 No soops found for time: 2022-07-25 08:16:01.184206 - 2022-07-25 10:40:00.199022 2026-03-08 16:15:57,630 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/25/CAL/solo_CAL_stix-cal-energy_20220725T081601-20220725T104000_V02.fits 2026-03-08 16:15:57,794 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9587kv4j 2026-03-08 16:15:57,794 Read config from in: /tmp/ecc_context_ecc_cfg_1_9587kv4j/post_ecc.ini 2026-03-08 16:15:59,059 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9587kv4j/solo_L1_stix-cal-energy_20220728_V03_ecc_in.fits 2026-03-08 16:24:57,417 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220728_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220728_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220728_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220728_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 16:25:04,183 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 16:25:04,200 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9587kv4j 2026-03-08 16:25:04,235 No soops found for time: 2022-07-28 08:57:12.632969 - 2022-07-28 11:21:11.647785 2026-03-08 16:25:04,334 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/28/CAL/solo_CAL_stix-cal-energy_20220728T085712-20220728T112111_V02.fits 2026-03-08 16:25:04,501 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_koj95t43 2026-03-08 16:25:04,502 Read config from in: /tmp/ecc_context_ecc_cfg_1_koj95t43/post_ecc.ini 2026-03-08 16:25:05,783 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_koj95t43/solo_L1_stix-cal-energy_20220709_V03_ecc_in.fits 2026-03-08 16:33:44,532 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220709_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220709_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220709_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220709_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 16:33:50,831 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 16:33:50,841 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_koj95t43 2026-03-08 16:33:50,867 No soops found for time: 2022-07-09 18:36:51.871232 - 2022-07-09 21:00:51.885747 2026-03-08 16:33:50,965 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/09/CAL/solo_CAL_stix-cal-energy_20220709T183651-20220709T210051_V02.fits 2026-03-08 16:33:51,124 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3kulubc_ 2026-03-08 16:33:51,124 Read config from in: /tmp/ecc_context_ecc_cfg_1_3kulubc_/post_ecc.ini 2026-03-08 16:33:52,387 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3kulubc_/solo_L1_stix-cal-energy_20220729_V03_ecc_in.fits 2026-03-08 16:42:47,950 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220729_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220729_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220729_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220729_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 16:42:54,281 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 16:42:54,294 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3kulubc_ 2026-03-08 16:42:54,320 No soops found for time: 2022-07-29 08:57:19.781156 - 2022-07-29 11:21:30.795992 2026-03-08 16:42:54,414 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/29/CAL/solo_CAL_stix-cal-energy_20220729T085719-20220729T112130_V02.fits 2026-03-08 16:42:54,576 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x37h9dtr 2026-03-08 16:42:54,577 Read config from in: /tmp/ecc_context_ecc_cfg_1_x37h9dtr/post_ecc.ini 2026-03-08 16:42:57,169 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x37h9dtr/solo_L1_stix-cal-energy_20220702_V03_ecc_in.fits 2026-03-08 16:51:51,179 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220702_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220702_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220702_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220702_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 16:51:57,386 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 16:51:57,394 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x37h9dtr 2026-03-08 16:51:57,420 No soops found for time: 2022-07-02 01:36:09.747633 - 2022-07-02 04:00:09.762388 2026-03-08 16:51:57,513 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/02/CAL/solo_CAL_stix-cal-energy_20220702T013609-20220702T040009_V02.fits 2026-03-08 16:51:57,673 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vg2jqjjb 2026-03-08 16:51:57,674 Read config from in: /tmp/ecc_context_ecc_cfg_1_vg2jqjjb/post_ecc.ini 2026-03-08 16:51:58,911 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vg2jqjjb/solo_L1_stix-cal-energy_20220713_V03_ecc_in.fits 2026-03-08 17:01:00,771 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220713_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220713_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220713_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220713_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 17:01:06,994 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 17:01:07,002 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vg2jqjjb 2026-03-08 17:01:07,029 No soops found for time: 2022-07-13 07:58:09.387441 - 2022-07-13 10:22:08.401954 2026-03-08 17:01:07,125 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/13/CAL/solo_CAL_stix-cal-energy_20220713T075809-20220713T102208_V02.fits 2026-03-08 17:01:07,291 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b_632fty 2026-03-08 17:01:07,291 Read config from in: /tmp/ecc_context_ecc_cfg_1_b_632fty/post_ecc.ini 2026-03-08 17:01:08,561 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b_632fty/solo_L1_stix-cal-energy_20220715_V03_ecc_in.fits 2026-03-08 17:09:55,235 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220715_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220715_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220715_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220715_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 17:10:01,551 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 17:10:01,559 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b_632fty 2026-03-08 17:10:01,585 No soops found for time: 2022-07-15 07:58:18.677751 - 2022-07-15 10:22:18.692266 2026-03-08 17:10:01,682 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/15/CAL/solo_CAL_stix-cal-energy_20220715T075818-20220715T102218_V02.fits 2026-03-08 17:10:01,848 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_aujapsft 2026-03-08 17:10:01,849 Read config from in: /tmp/ecc_context_ecc_cfg_1_aujapsft/post_ecc.ini 2026-03-08 17:10:03,116 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_aujapsft/solo_L1_stix-cal-energy_20220704_V03_ecc_in.fits 2026-03-08 17:19:03,260 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220704_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220704_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220704_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220704_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 17:19:09,464 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 17:19:09,472 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_aujapsft 2026-03-08 17:19:09,498 No soops found for time: 2022-07-04 18:34:02.145211 - 2022-07-04 20:58:01.159724 2026-03-08 17:19:09,592 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/07/04/CAL/solo_CAL_stix-cal-energy_20220704T183402-20220704T205801_V02.fits 2026-03-08 17:19:09,753 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n8lax03z 2026-03-08 17:19:09,753 Read config from in: /tmp/ecc_context_ecc_cfg_1_n8lax03z/post_ecc.ini 2026-03-08 17:19:11,009 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n8lax03z/solo_L1_stix-cal-energy_20220630_V03_ecc_in.fits 2026-03-08 17:27:58,465 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220630_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220630_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220630_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220630_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 17:28:04,721 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 17:28:04,728 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n8lax03z 2026-03-08 17:28:04,755 No soops found for time: 2022-06-30 01:36:00.452503 - 2022-06-30 03:59:59.467257 2026-03-08 17:28:04,850 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/30/CAL/solo_CAL_stix-cal-energy_20220630T013600-20220630T035959_V02.fits 2026-03-08 17:28:05,011 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q21rachy 2026-03-08 17:28:05,012 Read config from in: /tmp/ecc_context_ecc_cfg_1_q21rachy/post_ecc.ini 2026-03-08 17:28:06,266 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q21rachy/solo_L1_stix-cal-energy_20220610_V03_ecc_in.fits 2026-03-08 17:36:57,693 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220610_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220610_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220610_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220610_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 17:37:06,109 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 17:37:06,117 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q21rachy 2026-03-08 17:37:06,145 No soops found for time: 2022-06-09 22:54:16.480933 - 2022-06-10 01:18:16.495534 2026-03-08 17:37:06,245 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/10/CAL/solo_CAL_stix-cal-energy_20220609T225416-20220610T011816_V02.fits 2026-03-08 17:37:06,412 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t12kw4e5 2026-03-08 17:37:06,413 Read config from in: /tmp/ecc_context_ecc_cfg_1_t12kw4e5/post_ecc.ini 2026-03-08 17:37:07,678 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t12kw4e5/solo_L1_stix-cal-energy_20220601_V03_ecc_in.fits 2026-03-08 17:45:56,987 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220601_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220601_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220601_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220601_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 17:46:03,194 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 17:46:03,203 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t12kw4e5 2026-03-08 17:46:03,233 No soops found for time: 2022-06-01 00:10:12.165819 - 2022-06-01 02:34:12.180581 2026-03-08 17:46:03,329 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/01/CAL/solo_CAL_stix-cal-energy_20220601T001012-20220601T023412_V02.fits 2026-03-08 17:46:03,490 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_crzxl_ij 2026-03-08 17:46:03,490 Read config from in: /tmp/ecc_context_ecc_cfg_1_crzxl_ij/post_ecc.ini 2026-03-08 17:46:04,739 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_crzxl_ij/solo_L1_stix-cal-energy_20220624_V03_ecc_in.fits 2026-03-08 17:55:09,250 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220624_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220624_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220624_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220624_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 17:55:15,453 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 17:55:15,461 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_crzxl_ij 2026-03-08 17:55:15,486 No soops found for time: 2022-06-24 00:50:20.562483 - 2022-06-24 03:14:19.577237 2026-03-08 17:55:15,582 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/24/CAL/solo_CAL_stix-cal-energy_20220624T005020-20220624T031419_V02.fits 2026-03-08 17:55:15,742 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_65r0wtps 2026-03-08 17:55:15,743 Read config from in: /tmp/ecc_context_ecc_cfg_1_65r0wtps/post_ecc.ini 2026-03-08 17:55:16,990 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_65r0wtps/solo_L1_stix-cal-energy_20220608_V03_ecc_in.fits 2026-03-08 18:03:59,170 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220608_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220608_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220608_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220608_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 18:04:05,374 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 18:04:05,382 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_65r0wtps 2026-03-08 18:04:05,409 No soops found for time: 2022-06-07 22:54:07.188894 - 2022-06-08 01:18:07.203495 2026-03-08 18:04:05,504 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/08/CAL/solo_CAL_stix-cal-energy_20220607T225407-20220608T011807_V02.fits 2026-03-08 18:04:05,659 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8v8s7ixq 2026-03-08 18:04:05,660 Read config from in: /tmp/ecc_context_ecc_cfg_1_8v8s7ixq/post_ecc.ini 2026-03-08 18:04:06,901 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8v8s7ixq/solo_L1_stix-cal-energy_20220605_V03_ecc_in.fits 2026-03-08 18:12:59,485 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220605_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220605_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220605_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220605_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 18:13:05,792 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 18:13:05,799 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8v8s7ixq 2026-03-08 18:13:05,826 No soops found for time: 2022-06-05 05:02:18.786227 - 2022-06-05 07:26:17.800987 2026-03-08 18:13:05,921 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/05/CAL/solo_CAL_stix-cal-energy_20220605T050218-20220605T072617_V02.fits 2026-03-08 18:13:06,354 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_umfhz8k6 2026-03-08 18:13:06,355 Read config from in: /tmp/ecc_context_ecc_cfg_1_umfhz8k6/post_ecc.ini 2026-03-08 18:13:07,605 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_umfhz8k6/solo_L1_stix-cal-energy_20220614_V03_ecc_in.fits 2026-03-08 18:21:46,450 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220614_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220614_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220614_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220614_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 18:21:52,727 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 18:21:52,734 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_umfhz8k6 2026-03-08 18:21:52,761 No soops found for time: 2022-06-14 00:06:01.072254 - 2022-06-14 02:31:08.086968 2026-03-08 18:21:52,855 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/14/CAL/solo_CAL_stix-cal-energy_20220614T000601-20220614T023108_V02.fits 2026-03-08 18:21:53,020 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o5830zso 2026-03-08 18:21:53,020 Read config from in: /tmp/ecc_context_ecc_cfg_1_o5830zso/post_ecc.ini 2026-03-08 18:21:55,733 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o5830zso/solo_L1_stix-cal-energy_20220607_V03_ecc_in.fits 2026-03-08 18:30:45,535 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220607_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220607_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220607_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220607_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 18:30:51,778 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 18:30:51,785 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o5830zso 2026-03-08 18:30:51,812 No soops found for time: 2022-06-06 22:54:03.043708 - 2022-06-07 01:18:02.058468 2026-03-08 18:30:51,906 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/07/CAL/solo_CAL_stix-cal-energy_20220606T225403-20220607T011802_V02.fits 2026-03-08 18:30:52,068 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_061rrx1o 2026-03-08 18:30:52,068 Read config from in: /tmp/ecc_context_ecc_cfg_1_061rrx1o/post_ecc.ini 2026-03-08 18:30:53,309 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_061rrx1o/solo_L1_stix-cal-energy_20220606_V03_ecc_in.fits 2026-03-08 18:39:32,731 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220606_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220606_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220606_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220606_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 18:39:39,346 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 18:39:39,364 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_061rrx1o 2026-03-08 18:39:39,395 No soops found for time: 2022-06-06 05:02:22.933850 - 2022-06-06 05:19:08.935569 2026-03-08 18:39:39,494 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/06/CAL/solo_CAL_stix-cal-energy_20220606T050222-20220606T051908_V02.fits 2026-03-08 18:39:39,669 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oxam4120 2026-03-08 18:39:39,670 Read config from in: /tmp/ecc_context_ecc_cfg_1_oxam4120/post_ecc.ini 2026-03-08 18:39:40,988 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oxam4120/solo_L1_stix-cal-energy_20220603_V03_ecc_in.fits 2026-03-08 18:48:36,936 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220603_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220603_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220603_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220603_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 18:48:43,171 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 18:48:43,180 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oxam4120 2026-03-08 18:48:43,209 No soops found for time: 2022-06-03 02:21:50.474545 - 2022-06-03 04:46:34.489382 2026-03-08 18:48:43,305 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/03/CAL/solo_CAL_stix-cal-energy_20220603T022150-20220603T044634_V02.fits 2026-03-08 18:48:43,734 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_59hr6f30 2026-03-08 18:48:43,735 Read config from in: /tmp/ecc_context_ecc_cfg_1_59hr6f30/post_ecc.ini 2026-03-08 18:48:44,983 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_59hr6f30/solo_L1_stix-cal-energy_20220617_V03_ecc_in.fits 2026-03-08 18:57:40,517 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220617_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220617_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220617_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220617_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 18:57:46,753 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 18:57:46,763 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_59hr6f30 2026-03-08 18:57:46,792 No soops found for time: 2022-06-17 00:46:41.514413 - 2022-06-17 03:14:34.529408 2026-03-08 18:57:46,887 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/17/CAL/solo_CAL_stix-cal-energy_20220617T004641-20220617T031434_V02.fits 2026-03-08 18:57:47,329 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2l1yar6_ 2026-03-08 18:57:47,329 Read config from in: /tmp/ecc_context_ecc_cfg_1_2l1yar6_/post_ecc.ini 2026-03-08 18:57:48,580 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2l1yar6_/solo_L1_stix-cal-energy_20220618_V03_ecc_in.fits 2026-03-08 19:06:40,653 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220618_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220618_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220618_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220618_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 19:06:46,882 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 19:06:46,891 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2l1yar6_ 2026-03-08 19:06:46,918 No soops found for time: 2022-06-18 03:26:35.676638 - 2022-06-18 05:55:10.691704 2026-03-08 19:06:47,012 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/18/CAL/solo_CAL_stix-cal-energy_20220618T032635-20220618T055510_V02.fits 2026-03-08 19:06:47,166 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7yu4r7v2 2026-03-08 19:06:47,167 Read config from in: /tmp/ecc_context_ecc_cfg_1_7yu4r7v2/post_ecc.ini 2026-03-08 19:06:48,419 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7yu4r7v2/solo_L1_stix-cal-energy_20220623_V03_ecc_in.fits 2026-03-08 19:15:45,426 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220623_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220623_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 19:15:53,244 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 19:15:53,251 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7yu4r7v2 2026-03-08 19:15:53,276 No soops found for time: 2022-06-23 00:50:16.414919 - 2022-06-23 03:14:15.429673 2026-03-08 19:15:53,371 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/23/CAL/solo_CAL_stix-cal-energy_20220623T005016-20220623T031415_V02.fits 2026-03-08 19:15:53,532 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__bqwngxt 2026-03-08 19:15:53,533 Read config from in: /tmp/ecc_context_ecc_cfg_1__bqwngxt/post_ecc.ini 2026-03-08 19:15:54,773 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__bqwngxt/solo_L1_stix-cal-energy_20220616_V03_ecc_in.fits 2026-03-08 19:24:47,089 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220616_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220616_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220616_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220616_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 19:24:53,960 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 19:24:53,967 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__bqwngxt 2026-03-08 19:24:53,996 No soops found for time: 2022-06-16 00:33:40.367082 - 2022-06-16 02:58:14.381740 2026-03-08 19:24:54,097 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/16/CAL/solo_CAL_stix-cal-energy_20220616T003340-20220616T025814_V02.fits 2026-03-08 19:24:54,266 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y3328rx2 2026-03-08 19:24:54,267 Read config from in: /tmp/ecc_context_ecc_cfg_1_y3328rx2/post_ecc.ini 2026-03-08 19:24:55,536 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y3328rx2/solo_L1_stix-cal-energy_20220621_V03_ecc_in.fits 2026-03-08 19:33:30,673 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220621_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220621_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220621_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220621_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 19:33:36,936 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 19:33:36,943 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y3328rx2 2026-03-08 19:33:36,968 No soops found for time: 2022-06-21 00:16:01.116295 - 2022-06-21 02:40:52.131138 2026-03-08 19:33:37,064 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/21/CAL/solo_CAL_stix-cal-energy_20220621T001601-20220621T024052_V02.fits 2026-03-08 19:33:37,223 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nwcivgzk 2026-03-08 19:33:37,224 Read config from in: /tmp/ecc_context_ecc_cfg_1_nwcivgzk/post_ecc.ini 2026-03-08 19:33:38,460 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nwcivgzk/solo_L1_stix-cal-energy_20220612_V03_ecc_in.fits 2026-03-08 19:42:17,562 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220612_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220612_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220612_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220612_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 19:42:23,930 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 19:42:23,938 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nwcivgzk 2026-03-08 19:42:23,965 No soops found for time: 2022-06-11 22:54:26.772974 - 2022-06-12 01:18:26.787575 2026-03-08 19:42:24,060 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/12/CAL/solo_CAL_stix-cal-energy_20220611T225426-20220612T011826_V02.fits 2026-03-08 19:42:24,219 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i448fozs 2026-03-08 19:42:24,219 Read config from in: /tmp/ecc_context_ecc_cfg_1_i448fozs/post_ecc.ini 2026-03-08 19:42:25,485 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i448fozs/solo_L1_stix-cal-energy_20220611_V03_ecc_in.fits 2026-03-08 19:51:20,322 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220611_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220611_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220611_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220611_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 19:51:26,752 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 19:51:26,763 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i448fozs 2026-03-08 19:51:26,797 No soops found for time: 2022-06-10 22:54:21.626953 - 2022-06-11 01:18:21.641554 2026-03-08 19:51:26,900 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/11/CAL/solo_CAL_stix-cal-energy_20220610T225421-20220611T011821_V02.fits 2026-03-08 19:51:27,071 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ehm5w6qp 2026-03-08 19:51:27,072 Read config from in: /tmp/ecc_context_ecc_cfg_1_ehm5w6qp/post_ecc.ini 2026-03-08 19:51:28,411 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ehm5w6qp/solo_L1_stix-cal-energy_20220626_V03_ecc_in.fits 2026-03-08 20:00:26,942 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220626_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220626_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220626_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220626_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 20:00:33,412 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 20:00:33,421 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ehm5w6qp 2026-03-08 20:00:33,448 No soops found for time: 2022-06-26 00:50:29.857612 - 2022-06-26 03:14:29.872368 2026-03-08 20:00:33,544 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/26/CAL/solo_CAL_stix-cal-energy_20220626T005029-20220626T031429_V02.fits 2026-03-08 20:00:33,712 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z65sm4ts 2026-03-08 20:00:33,712 Read config from in: /tmp/ecc_context_ecc_cfg_1_z65sm4ts/post_ecc.ini 2026-03-08 20:00:35,026 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z65sm4ts/solo_L1_stix-cal-energy_20220619_V03_ecc_in.fits 2026-03-08 20:09:28,139 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220619_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220619_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220619_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220619_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 20:09:36,711 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 20:09:36,729 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z65sm4ts 2026-03-08 20:09:36,784 No soops found for time: 2022-06-19 04:14:23.827497 - 2022-06-19 06:39:25.842203 2026-03-08 20:09:36,891 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/19/CAL/solo_CAL_stix-cal-energy_20220619T041423-20220619T063925_V02.fits 2026-03-08 20:09:37,076 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w15empnf 2026-03-08 20:09:37,076 Read config from in: /tmp/ecc_context_ecc_cfg_1_w15empnf/post_ecc.ini 2026-03-08 20:09:38,328 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w15empnf/solo_L1_stix-cal-energy_20220622_V03_ecc_in.fits 2026-03-08 20:18:26,194 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220622_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220622_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220622_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220622_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 20:18:32,490 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 20:18:32,501 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w15empnf 2026-03-08 20:18:32,529 No soops found for time: 2022-06-22 00:39:45.266284 - 2022-06-22 03:04:47.281145 2026-03-08 20:18:32,624 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/22/CAL/solo_CAL_stix-cal-energy_20220622T003945-20220622T030447_V02.fits 2026-03-08 20:18:33,059 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cj0ohonk 2026-03-08 20:18:33,060 Read config from in: /tmp/ecc_context_ecc_cfg_1_cj0ohonk/post_ecc.ini 2026-03-08 20:18:34,303 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cj0ohonk/solo_L1_stix-cal-energy_20220625_V03_ecc_in.fits 2026-03-08 20:27:30,677 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220625_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220625_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220625_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220625_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 20:27:36,930 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 20:27:36,937 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cj0ohonk 2026-03-08 20:27:36,966 No soops found for time: 2022-06-25 00:50:24.710047 - 2022-06-25 03:14:24.724802 2026-03-08 20:27:37,062 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/25/CAL/solo_CAL_stix-cal-energy_20220625T005024-20220625T031424_V02.fits 2026-03-08 20:27:37,233 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qv68_gmn 2026-03-08 20:27:37,233 Read config from in: /tmp/ecc_context_ecc_cfg_1_qv68_gmn/post_ecc.ini 2026-03-08 20:27:38,504 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qv68_gmn/solo_L1_stix-cal-energy_20220628_V03_ecc_in.fits 2026-03-08 20:36:26,673 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220628_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220628_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220628_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220628_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 20:36:32,948 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 20:36:32,954 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qv68_gmn 2026-03-08 20:36:32,981 No soops found for time: 2022-06-28 00:26:01.150218 - 2022-06-28 02:52:49.165260 2026-03-08 20:36:33,077 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/28/CAL/solo_CAL_stix-cal-energy_20220628T002601-20220628T025249_V02.fits 2026-03-08 20:36:33,238 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_txyllg2p 2026-03-08 20:36:33,238 Read config from in: /tmp/ecc_context_ecc_cfg_1_txyllg2p/post_ecc.ini 2026-03-08 20:36:34,493 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_txyllg2p/solo_L1_stix-cal-energy_20220609_V03_ecc_in.fits 2026-03-08 20:45:19,270 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220609_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220609_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220609_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220609_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 20:45:25,491 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 20:45:25,497 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_txyllg2p 2026-03-08 20:45:25,524 No soops found for time: 2022-06-08 22:54:12.334914 - 2022-06-09 01:18:11.349514 2026-03-08 20:45:25,618 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/09/CAL/solo_CAL_stix-cal-energy_20220608T225412-20220609T011811_V02.fits 2026-03-08 20:45:25,773 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u8tlmull 2026-03-08 20:45:25,774 Read config from in: /tmp/ecc_context_ecc_cfg_1_u8tlmull/post_ecc.ini 2026-03-08 20:45:27,033 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u8tlmull/solo_L1_stix-cal-energy_20220629_V03_ecc_in.fits 2026-03-08 20:54:15,328 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220629_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220629_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220629_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220629_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 20:54:21,598 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 20:54:21,617 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u8tlmull 2026-03-08 20:54:21,647 No soops found for time: 2022-06-29 00:54:12.300663 - 2022-06-29 03:19:17.315529 2026-03-08 20:54:21,743 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/29/CAL/solo_CAL_stix-cal-energy_20220629T005412-20220629T031917_V02.fits 2026-03-08 20:54:23,681 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8ebpvbc7 2026-03-08 20:54:23,682 Read config from in: /tmp/ecc_context_ecc_cfg_1_8ebpvbc7/post_ecc.ini 2026-03-08 20:54:24,928 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8ebpvbc7/solo_L1_stix-cal-energy_20220602_V03_ecc_in.fits 2026-03-08 21:03:06,117 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220602_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220602_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220602_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220602_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 21:03:12,352 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 21:03:12,359 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8ebpvbc7 2026-03-08 21:03:12,390 No soops found for time: 2022-06-02 00:13:23.313761 - 2022-06-02 02:41:32.328948 2026-03-08 21:03:12,488 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/02/CAL/solo_CAL_stix-cal-energy_20220602T001323-20220602T024132_V02.fits 2026-03-08 21:03:12,648 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2y3u63sg 2026-03-08 21:03:12,649 Read config from in: /tmp/ecc_context_ecc_cfg_1_2y3u63sg/post_ecc.ini 2026-03-08 21:03:13,952 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2y3u63sg/solo_L1_stix-cal-energy_20220613_V03_ecc_in.fits 2026-03-08 21:12:04,713 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220613_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220613_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220613_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220613_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 21:12:10,906 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 21:12:10,913 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2y3u63sg 2026-03-08 21:12:10,938 No soops found for time: 2022-06-12 22:54:31.918994 - 2022-06-13 01:18:30.933594 2026-03-08 21:12:11,032 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/13/CAL/solo_CAL_stix-cal-energy_20220612T225431-20220613T011830_V02.fits 2026-03-08 21:12:11,194 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0oe_tzwu 2026-03-08 21:12:11,195 Read config from in: /tmp/ecc_context_ecc_cfg_1_0oe_tzwu/post_ecc.ini 2026-03-08 21:12:12,440 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0oe_tzwu/solo_L1_stix-cal-energy_20220615_V03_ecc_in.fits 2026-03-08 21:20:53,290 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220615_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220615_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220615_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220615_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 21:20:59,465 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 21:20:59,471 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0oe_tzwu 2026-03-08 21:20:59,497 No soops found for time: 2022-06-15 00:22:38.219951 - 2022-06-15 02:46:45.234564 2026-03-08 21:20:59,591 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/15/CAL/solo_CAL_stix-cal-energy_20220615T002238-20220615T024645_V02.fits 2026-03-08 21:20:59,756 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8kvw67e3 2026-03-08 21:20:59,757 Read config from in: /tmp/ecc_context_ecc_cfg_1_8kvw67e3/post_ecc.ini 2026-03-08 21:21:01,002 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8kvw67e3/solo_L1_stix-cal-energy_20220604_V03_ecc_in.fits 2026-03-08 21:29:48,082 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220604_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220604_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220604_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220604_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 21:29:54,408 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 21:29:54,419 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8kvw67e3 2026-03-08 21:29:54,456 No soops found for time: 2022-06-04 05:02:13.638602 - 2022-06-04 07:26:12.653362 2026-03-08 21:29:54,557 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/06/04/CAL/solo_CAL_stix-cal-energy_20220604T050213-20220604T072612_V02.fits 2026-03-08 21:29:54,725 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fpis79_m 2026-03-08 21:29:54,726 Read config from in: /tmp/ecc_context_ecc_cfg_1_fpis79_m/post_ecc.ini 2026-03-08 21:29:55,980 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fpis79_m/solo_L1_stix-cal-energy_20220330_V03_ecc_in.fits 2026-03-08 21:38:52,464 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220330_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220330_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220330_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220330_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 21:38:59,114 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 21:38:59,123 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fpis79_m 2026-03-08 21:38:59,159 Soop found: SOOP 2026-03-08 21:38:59,159 Soop found: SOOP 2026-03-08 21:38:59,267 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/30/CAL/solo_CAL_stix-cal-energy_20220330T063106-20220330T085505_V02.fits 2026-03-08 21:38:59,449 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__eu2osnj 2026-03-08 21:38:59,449 Read config from in: /tmp/ecc_context_ecc_cfg_1__eu2osnj/post_ecc.ini 2026-03-08 21:39:00,733 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__eu2osnj/solo_L1_stix-cal-energy_20220310_V03_ecc_in.fits 2026-03-08 21:48:45,431 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220310_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220310_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220310_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220310_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 21:48:53,165 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 21:48:53,173 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__eu2osnj 2026-03-08 21:48:53,197 No soops found for time: 2022-03-10 03:22:10.763211 - 2022-03-10 05:46:10.778241 2026-03-08 21:48:53,297 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/10/CAL/solo_CAL_stix-cal-energy_20220310T032210-20220310T054610_V02.fits 2026-03-08 21:48:53,451 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kbej7178 2026-03-08 21:48:53,452 Read config from in: /tmp/ecc_context_ecc_cfg_1_kbej7178/post_ecc.ini 2026-03-08 21:48:54,686 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kbej7178/solo_L1_stix-cal-energy_20220301_V03_ecc_in.fits 2026-03-08 21:57:52,535 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220301_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220301_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220301_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220301_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 21:57:58,825 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 21:57:58,835 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kbej7178 2026-03-08 21:57:58,866 No soops found for time: 2022-03-01 06:06:01.427628 - 2022-03-01 08:30:00.442656 2026-03-08 21:57:58,979 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/01/CAL/solo_CAL_stix-cal-energy_20220301T060601-20220301T083000_V02.fits 2026-03-08 21:57:59,380 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zme0q5qn 2026-03-08 21:57:59,381 Read config from in: /tmp/ecc_context_ecc_cfg_1_zme0q5qn/post_ecc.ini 2026-03-08 21:58:00,741 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zme0q5qn/solo_L1_stix-cal-energy_20220324_V03_ecc_in.fits 2026-03-08 22:07:11,239 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220324_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220324_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220324_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220324_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 22:07:17,481 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 22:07:17,488 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zme0q5qn 2026-03-08 22:07:17,515 Soop found: SOOP 2026-03-08 22:07:17,608 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/24/CAL/solo_CAL_stix-cal-energy_20220324T073705-20220324T100158_V02.fits 2026-03-08 22:07:17,807 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q35hvh4p 2026-03-08 22:07:17,808 Read config from in: /tmp/ecc_context_ecc_cfg_1_q35hvh4p/post_ecc.ini 2026-03-08 22:07:19,069 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q35hvh4p/solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits 2026-03-08 22:16:29,966 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 22:16:36,660 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-08 22:16:36,662 ECC result Gain_Prime 0.0 for DET 25 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-08 22:16:36,667 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q35hvh4p 2026-03-08 22:16:36,698 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_csf0saz9 2026-03-08 22:16:36,699 Read config from in: /tmp/ecc_context_ecc_cfg_1_csf0saz9/post_ecc.ini 2026-03-08 22:16:37,952 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_csf0saz9/solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits 2026-03-08 22:26:03,667 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 22:26:09,907 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 22:26:09,914 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_csf0saz9 2026-03-08 22:26:09,941 Soop found: SOOP 2026-03-08 22:26:10,035 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/08/CAL/solo_CAL_stix-cal-energy_20220307T235724-20220308T001627_V02.fits 2026-03-08 22:26:10,071 No soops found for time: 2022-03-08 03:11:41.461520 - 2022-03-08 05:35:56.476576 2026-03-08 22:26:10,164 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/08/CAL/solo_CAL_stix-cal-energy_20220308T031141-20220308T053556_V02.fits 2026-03-08 22:26:10,617 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7ncamp5m 2026-03-08 22:26:10,617 Read config from in: /tmp/ecc_context_ecc_cfg_1_7ncamp5m/post_ecc.ini 2026-03-08 22:26:11,874 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7ncamp5m/solo_L1_stix-cal-energy_20220305_V03_ecc_in.fits 2026-03-08 22:35:16,272 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220305_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220305_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220305_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220305_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 22:35:22,692 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 22:35:22,700 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7ncamp5m 2026-03-08 22:35:22,728 Soop found: SOOP 2026-03-08 22:35:22,822 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/05/CAL/solo_CAL_stix-cal-energy_20220305T060621-20220305T083021_V02.fits 2026-03-08 22:35:22,987 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p15drpk1 2026-03-08 22:35:22,988 Read config from in: /tmp/ecc_context_ecc_cfg_1_p15drpk1/post_ecc.ini 2026-03-08 22:35:24,243 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p15drpk1/solo_L1_stix-cal-energy_20220314_V03_ecc_in.fits 2026-03-08 22:44:24,255 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220314_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220314_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220314_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220314_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 22:44:31,881 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 22:44:31,889 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p15drpk1 2026-03-08 22:44:31,913 No soops found for time: 2022-03-14 04:04:56.368866 - 2022-03-14 06:31:38.384178 2026-03-08 22:44:32,007 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/14/CAL/solo_CAL_stix-cal-energy_20220314T040456-20220314T063138_V02.fits 2026-03-08 22:44:32,163 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4emmcs4h 2026-03-08 22:44:32,163 Read config from in: /tmp/ecc_context_ecc_cfg_1_4emmcs4h/post_ecc.ini 2026-03-08 22:44:33,398 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4emmcs4h/solo_L1_stix-cal-energy_20220307_V03_ecc_in.fits 2026-03-08 22:53:32,161 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220307_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220307_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220307_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220307_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 22:53:38,358 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 22:53:38,365 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4emmcs4h 2026-03-08 22:53:38,390 Soop found: SOOP 2026-03-08 22:53:38,485 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/07/CAL/solo_CAL_stix-cal-energy_20220307T031123-20220307T051537_V02.fits 2026-03-08 22:53:38,923 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l593gqf4 2026-03-08 22:53:38,924 Read config from in: /tmp/ecc_context_ecc_cfg_1_l593gqf4/post_ecc.ini 2026-03-08 22:53:40,166 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l593gqf4/solo_L1_stix-cal-energy_20220320_V03_ecc_in.fits 2026-03-08 23:02:37,255 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220320_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220320_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220320_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220320_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 23:02:43,429 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 23:02:43,436 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l593gqf4 2026-03-08 23:02:43,463 Soop found: SOOP 2026-03-08 23:02:43,557 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/20/CAL/solo_CAL_stix-cal-energy_20220320T072437-20220320T094837_V02.fits 2026-03-08 23:02:44,017 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a8i4dvk5 2026-03-08 23:02:44,018 Read config from in: /tmp/ecc_context_ecc_cfg_1_a8i4dvk5/post_ecc.ini 2026-03-08 23:02:45,263 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a8i4dvk5/solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits 2026-03-08 23:11:50,042 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 23:11:56,284 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 23:11:56,291 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a8i4dvk5 2026-03-08 23:11:56,323 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lq3onkud 2026-03-08 23:11:56,323 Read config from in: /tmp/ecc_context_ecc_cfg_1_lq3onkud/post_ecc.ini 2026-03-08 23:11:57,578 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lq3onkud/solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits 2026-03-08 23:20:56,676 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 23:21:03,051 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 23:21:03,058 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lq3onkud 2026-03-08 23:21:03,083 Soop found: SOOP 2026-03-08 23:21:03,176 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/06/CAL/solo_CAL_stix-cal-energy_20220306T060626-20220306T073902_V02.fits 2026-03-08 23:21:03,212 Soop found: SOOP 2026-03-08 23:21:03,212 Soop found: SOOP 2026-03-08 23:21:03,304 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/06/CAL/solo_CAL_stix-cal-energy_20220306T214104-20220306T221345_V02.fits 2026-03-08 23:21:03,486 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_41he0rwg 2026-03-08 23:21:03,487 Read config from in: /tmp/ecc_context_ecc_cfg_1_41he0rwg/post_ecc.ini 2026-03-08 23:21:04,734 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_41he0rwg/solo_L1_stix-cal-energy_20220303_V03_ecc_in.fits 2026-03-08 23:29:56,621 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220303_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220303_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220303_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220303_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 23:30:02,910 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 23:30:02,917 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_41he0rwg 2026-03-08 23:30:02,944 Soop found: SOOP 2026-03-08 23:30:03,040 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/03/CAL/solo_CAL_stix-cal-energy_20220303T060610-20220303T083010_V02.fits 2026-03-08 23:30:03,510 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8bp0yok8 2026-03-08 23:30:03,510 Read config from in: /tmp/ecc_context_ecc_cfg_1_8bp0yok8/post_ecc.ini 2026-03-08 23:30:04,760 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8bp0yok8/solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits 2026-03-08 23:39:10,186 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 23:39:18,131 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 23:39:18,138 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8bp0yok8 2026-03-08 23:39:18,168 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e44jplrn 2026-03-08 23:39:18,169 Read config from in: /tmp/ecc_context_ecc_cfg_1_e44jplrn/post_ecc.ini 2026-03-08 23:39:19,441 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e44jplrn/solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits 2026-03-08 23:48:18,677 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 23:48:24,961 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 23:48:24,971 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e44jplrn 2026-03-08 23:48:24,996 Soop found: SOOP 2026-03-08 23:48:24,996 Soop found: SOOP 2026-03-08 23:48:25,089 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/17/CAL/solo_CAL_stix-cal-energy_20220317T025040-20220317T031024_V02.fits 2026-03-08 23:48:25,126 Soop found: SOOP 2026-03-08 23:48:25,217 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/17/CAL/solo_CAL_stix-cal-energy_20220317T061130-20220317T083552_V02.fits 2026-03-08 23:48:25,376 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__uaukrkb 2026-03-08 23:48:25,376 Read config from in: /tmp/ecc_context_ecc_cfg_1__uaukrkb/post_ecc.ini 2026-03-08 23:48:26,615 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__uaukrkb/solo_L1_stix-cal-energy_20220331_V03_ecc_in.fits 2026-03-08 23:57:22,866 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220331_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220331_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220331_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220331_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-08 23:57:29,812 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-08 23:57:29,821 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__uaukrkb 2026-03-08 23:57:29,855 Soop found: SOOP 2026-03-08 23:57:29,964 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/31/CAL/solo_CAL_stix-cal-energy_20220331T063111-20220331T085510_V02.fits 2026-03-08 23:57:30,154 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o9qkzv5h 2026-03-08 23:57:30,155 Read config from in: /tmp/ecc_context_ecc_cfg_1_o9qkzv5h/post_ecc.ini 2026-03-08 23:57:31,447 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o9qkzv5h/solo_L1_stix-cal-energy_20220318_V03_ecc_in.fits 2026-03-09 00:06:30,453 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220318_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220318_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220318_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220318_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 00:06:36,724 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 00:06:36,731 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o9qkzv5h 2026-03-09 00:06:36,758 Soop found: SOOP 2026-03-09 00:06:36,853 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/18/CAL/solo_CAL_stix-cal-energy_20220318T062756-20220318T085427_V02.fits 2026-03-09 00:06:37,285 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yq15jvp9 2026-03-09 00:06:37,285 Read config from in: /tmp/ecc_context_ecc_cfg_1_yq15jvp9/post_ecc.ini 2026-03-09 00:06:38,533 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yq15jvp9/solo_L1_stix-cal-energy_20220323_V03_ecc_in.fits 2026-03-09 00:15:48,699 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220323_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220323_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220323_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220323_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 00:15:54,983 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 00:15:54,991 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yq15jvp9 2026-03-09 00:15:55,022 Soop found: SOOP 2026-03-09 00:15:55,121 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/23/CAL/solo_CAL_stix-cal-energy_20220323T070952-20220323T093519_V02.fits 2026-03-09 00:15:55,284 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w01geu71 2026-03-09 00:15:55,284 Read config from in: /tmp/ecc_context_ecc_cfg_1_w01geu71/post_ecc.ini 2026-03-09 00:15:56,534 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w01geu71/solo_L1_stix-cal-energy_20220316_V03_ecc_in.fits 2026-03-09 00:24:49,236 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220316_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220316_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220316_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220316_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 00:24:55,834 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 00:24:55,841 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w01geu71 2026-03-09 00:24:55,871 No soops found for time: 2022-03-16 05:58:15.690822 - 2022-03-16 08:02:37.703849 2026-03-09 00:24:55,966 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/16/CAL/solo_CAL_stix-cal-energy_20220316T055815-20220316T080237_V02.fits 2026-03-09 00:24:56,361 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9svgny49 2026-03-09 00:24:56,361 Read config from in: /tmp/ecc_context_ecc_cfg_1_9svgny49/post_ecc.ini 2026-03-09 00:24:59,152 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9svgny49/solo_L1_stix-cal-energy_20220312_V03_ecc_in.fits 2026-03-09 00:34:48,589 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220312_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220312_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 00:34:54,891 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 00:34:54,898 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9svgny49 2026-03-09 00:34:54,925 No soops found for time: 2022-03-12 03:18:01.063373 - 2022-03-12 05:42:50.078488 2026-03-09 00:34:55,019 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/12/CAL/solo_CAL_stix-cal-energy_20220312T031801-20220312T054250_V02.fits 2026-03-09 00:34:55,180 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_575tvftl 2026-03-09 00:34:55,180 Read config from in: /tmp/ecc_context_ecc_cfg_1_575tvftl/post_ecc.ini 2026-03-09 00:34:56,418 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_575tvftl/solo_L1_stix-cal-energy_20220327_V03_ecc_in.fits 2026-03-09 00:44:20,207 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220327_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220327_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220327_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220327_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 00:44:26,806 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 00:44:26,815 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_575tvftl 2026-03-09 00:44:26,865 Soop found: SOOP 2026-03-09 00:44:26,972 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/27/CAL/solo_CAL_stix-cal-energy_20220327T075147-20220327T101547_V02.fits 2026-03-09 00:44:27,137 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ddawtt6_ 2026-03-09 00:44:27,138 Read config from in: /tmp/ecc_context_ecc_cfg_1_ddawtt6_/post_ecc.ini 2026-03-09 00:44:28,376 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ddawtt6_/solo_L1_stix-cal-energy_20220326_V03_ecc_in.fits 2026-03-09 00:53:50,767 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220326_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220326_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220326_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220326_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 00:53:57,096 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 00:53:57,104 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ddawtt6_ 2026-03-09 00:53:57,132 Soop found: SOOP 2026-03-09 00:53:57,229 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/26/CAL/solo_CAL_stix-cal-energy_20220326T075142-20220326T101542_V02.fits 2026-03-09 00:53:57,395 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jbnhgx5_ 2026-03-09 00:53:57,395 Read config from in: /tmp/ecc_context_ecc_cfg_1_jbnhgx5_/post_ecc.ini 2026-03-09 00:53:58,640 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jbnhgx5_/solo_L1_stix-cal-energy_20220319_V03_ecc_in.fits 2026-03-09 01:03:06,031 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220319_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220319_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 01:03:12,495 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 01:03:12,502 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jbnhgx5_ 2026-03-09 01:03:12,530 Soop found: SOOP 2026-03-09 01:03:12,624 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/19/CAL/solo_CAL_stix-cal-energy_20220319T072432-20220319T094832_V02.fits 2026-03-09 01:03:12,782 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_19h0_9t5 2026-03-09 01:03:12,782 Read config from in: /tmp/ecc_context_ecc_cfg_1_19h0_9t5/post_ecc.ini 2026-03-09 01:03:14,025 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_19h0_9t5/solo_L1_stix-cal-energy_20220322_V03_ecc_in.fits 2026-03-09 01:12:13,610 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220322_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220322_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220322_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220322_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 01:12:19,852 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 01:12:19,858 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_19h0_9t5 2026-03-09 01:12:19,884 Soop found: SOOP 2026-03-09 01:12:19,978 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/22/CAL/solo_CAL_stix-cal-energy_20220322T062101-20220322T084629_V02.fits 2026-03-09 01:12:20,134 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2spkylob 2026-03-09 01:12:20,134 Read config from in: /tmp/ecc_context_ecc_cfg_1_2spkylob/post_ecc.ini 2026-03-09 01:12:21,393 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2spkylob/solo_L1_stix-cal-energy_20220325_V03_ecc_in.fits 2026-03-09 01:21:39,542 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220325_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220325_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220325_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220325_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 01:21:45,838 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 01:21:45,845 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2spkylob 2026-03-09 01:21:45,871 Soop found: SOOP 2026-03-09 01:21:45,965 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/25/CAL/solo_CAL_stix-cal-energy_20220325T075137-20220325T101537_V02.fits 2026-03-09 01:21:46,122 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3dlpti8z 2026-03-09 01:21:46,123 Read config from in: /tmp/ecc_context_ecc_cfg_1_3dlpti8z/post_ecc.ini 2026-03-09 01:21:48,793 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3dlpti8z/solo_L1_stix-cal-energy_20220309_V03_ecc_in.fits 2026-03-09 01:31:39,999 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220309_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220309_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220309_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220309_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 01:31:46,200 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 01:31:46,215 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3dlpti8z 2026-03-09 01:31:46,247 No soops found for time: 2022-03-09 03:22:05.612904 - 2022-03-09 05:46:05.627933 2026-03-09 01:31:46,348 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/09/CAL/solo_CAL_stix-cal-energy_20220309T032205-20220309T054605_V02.fits 2026-03-09 01:31:46,514 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tf2jxiq3 2026-03-09 01:31:46,514 Read config from in: /tmp/ecc_context_ecc_cfg_1_tf2jxiq3/post_ecc.ini 2026-03-09 01:31:47,749 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tf2jxiq3/solo_L1_stix-cal-energy_20220329_V03_ecc_in.fits 2026-03-09 01:40:46,311 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220329_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220329_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220329_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220329_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 01:40:52,634 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 01:40:52,642 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tf2jxiq3 2026-03-09 01:40:52,672 Soop found: SOOP 2026-03-09 01:40:52,769 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/29/CAL/solo_CAL_stix-cal-energy_20220329T063100-20220329T085500_V02.fits 2026-03-09 01:40:52,931 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kcng1i3o 2026-03-09 01:40:52,932 Read config from in: /tmp/ecc_context_ecc_cfg_1_kcng1i3o/post_ecc.ini 2026-03-09 01:40:54,183 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kcng1i3o/solo_L1_stix-cal-energy_20220302_V03_ecc_in.fits 2026-03-09 01:49:49,762 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220302_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220302_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220302_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220302_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 01:49:56,018 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 01:49:56,025 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kcng1i3o 2026-03-09 01:49:56,050 Soop found: SOOP 2026-03-09 01:49:56,144 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/02/CAL/solo_CAL_stix-cal-energy_20220302T060606-20220302T083005_V02.fits 2026-03-09 01:49:56,301 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_953a7tc4 2026-03-09 01:49:56,302 Read config from in: /tmp/ecc_context_ecc_cfg_1_953a7tc4/post_ecc.ini 2026-03-09 01:49:57,548 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_953a7tc4/solo_L1_stix-cal-energy_20220313_V03_ecc_in.fits 2026-03-09 02:00:21,597 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220313_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220313_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220313_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220313_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 02:00:27,852 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-09 02:00:27,859 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_953a7tc4 2026-03-09 02:00:27,889 No soops found for time: 2022-03-13 03:26:18.214536 - 2022-03-13 05:51:01.229640 2026-03-09 02:00:27,983 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/13/CAL/solo_CAL_stix-cal-energy_20220313T032618-20220313T055101_V02.fits 2026-03-09 02:00:28,142 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cpctcjpu 2026-03-09 02:00:28,142 Read config from in: /tmp/ecc_context_ecc_cfg_1_cpctcjpu/post_ecc.ini 2026-03-09 02:00:29,395 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cpctcjpu/solo_L1_stix-cal-energy_20220315_V03_ecc_in.fits 2026-03-09 02:09:21,791 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220315_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220315_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220315_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220315_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 02:09:28,043 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 02:09:28,053 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cpctcjpu 2026-03-09 02:09:28,085 No soops found for time: 2022-03-15 05:09:14.525876 - 2022-03-15 07:34:49.541071 2026-03-09 02:09:28,184 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/15/CAL/solo_CAL_stix-cal-energy_20220315T050914-20220315T073449_V02.fits 2026-03-09 02:09:28,353 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pgw2f1pa 2026-03-09 02:09:28,354 Read config from in: /tmp/ecc_context_ecc_cfg_1_pgw2f1pa/post_ecc.ini 2026-03-09 02:09:29,608 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pgw2f1pa/solo_L1_stix-cal-energy_20220304_V03_ecc_in.fits 2026-03-09 02:18:32,247 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220304_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220304_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220304_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220304_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 02:18:39,925 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 02:18:39,933 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pgw2f1pa 2026-03-09 02:18:39,956 Soop found: SOOP 2026-03-09 02:18:40,049 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/03/04/CAL/solo_CAL_stix-cal-energy_20220304T060615-20220304T083015_V02.fits 2026-03-09 02:18:40,208 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_but7ds0o 2026-03-09 02:18:40,208 Read config from in: /tmp/ecc_context_ecc_cfg_1_but7ds0o/post_ecc.ini 2026-03-09 02:18:41,448 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_but7ds0o/solo_L1_stix-cal-energy_20221230_V03_ecc_in.fits 2026-03-09 02:27:41,859 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221230_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221230_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221230_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221230_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 02:27:48,071 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 02:27:48,078 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_but7ds0o 2026-03-09 02:27:48,104 No soops found for time: 2022-12-30 19:05:55.099513 - 2022-12-30 21:29:54.114497 2026-03-09 02:27:48,206 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/30/CAL/solo_CAL_stix-cal-energy_20221230T190555-20221230T212954_V02.fits 2026-03-09 02:27:48,369 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wf093dw9 2026-03-09 02:27:48,369 Read config from in: /tmp/ecc_context_ecc_cfg_1_wf093dw9/post_ecc.ini 2026-03-09 02:27:49,614 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wf093dw9/solo_L1_stix-cal-energy_20221210_V03_ecc_in.fits 2026-03-09 02:36:48,510 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221210_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221210_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 02:36:54,728 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 02:36:54,735 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wf093dw9 2026-03-09 02:36:54,761 No soops found for time: 2022-12-10 18:01:47.092564 - 2022-12-10 20:25:46.107589 2026-03-09 02:36:54,856 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/10/CAL/solo_CAL_stix-cal-energy_20221210T180147-20221210T202546_V02.fits 2026-03-09 02:36:55,019 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f3a879l3 2026-03-09 02:36:55,019 Read config from in: /tmp/ecc_context_ecc_cfg_1_f3a879l3/post_ecc.ini 2026-03-09 02:36:56,258 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f3a879l3/solo_L1_stix-cal-energy_20221201_V03_ecc_in.fits 2026-03-09 02:45:48,810 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221201_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221201_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 02:45:55,005 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 02:45:55,012 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f3a879l3 2026-03-09 02:45:55,039 No soops found for time: 2022-12-01 02:12:51.639711 - 2022-12-01 04:36:51.654785 2026-03-09 02:45:55,133 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/01/CAL/solo_CAL_stix-cal-energy_20221201T021251-20221201T043651_V02.fits 2026-03-09 02:45:55,292 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ealwkzs0 2026-03-09 02:45:55,292 Read config from in: /tmp/ecc_context_ecc_cfg_1_ealwkzs0/post_ecc.ini 2026-03-09 02:45:56,539 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ealwkzs0/solo_L1_stix-cal-energy_20221224_V03_ecc_in.fits 2026-03-09 02:54:48,513 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221224_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221224_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 02:54:54,783 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 02:54:54,791 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ealwkzs0 2026-03-09 02:54:54,821 No soops found for time: 2022-12-24 18:34:45.197099 - 2022-12-24 20:58:44.212083 2026-03-09 02:54:54,915 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/24/CAL/solo_CAL_stix-cal-energy_20221224T183445-20221224T205844_V02.fits 2026-03-09 02:54:55,081 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_azjarwji 2026-03-09 02:54:55,081 Read config from in: /tmp/ecc_context_ecc_cfg_1_azjarwji/post_ecc.ini 2026-03-09 02:54:56,331 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_azjarwji/solo_L1_stix-cal-energy_20221208_V03_ecc_in.fits 2026-03-09 03:03:43,356 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221208_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221208_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 03:03:49,623 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 03:03:49,631 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_azjarwji 2026-03-09 03:03:49,658 No soops found for time: 2022-12-08 17:01:14.785705 - 2022-12-08 19:25:20.800743 2026-03-09 03:03:49,754 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/08/CAL/solo_CAL_stix-cal-energy_20221208T170114-20221208T192520_V02.fits 2026-03-09 03:03:49,937 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uofqt5b_ 2026-03-09 03:03:49,937 Read config from in: /tmp/ecc_context_ecc_cfg_1_uofqt5b_/post_ecc.ini 2026-03-09 03:03:51,203 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uofqt5b_/solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits 2026-03-09 03:12:31,459 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 03:12:39,333 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 03:12:39,340 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uofqt5b_ 2026-03-09 03:12:39,371 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_acooxth3 2026-03-09 03:12:39,371 Read config from in: /tmp/ecc_context_ecc_cfg_1_acooxth3/post_ecc.ini 2026-03-09 03:12:40,626 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_acooxth3/solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits 2026-03-09 03:21:38,659 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 03:21:44,910 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 03:21:44,925 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_acooxth3 2026-03-09 03:21:44,953 No soops found for time: 2022-12-05 02:13:11.242705 - 2022-12-05 03:05:40.248199 2026-03-09 03:21:45,055 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/05/CAL/solo_CAL_stix-cal-energy_20221205T021311-20221205T030540_V02.fits 2026-03-09 03:21:45,093 No soops found for time: 2022-12-05 17:01:01.335644 - 2022-12-05 19:25:00.350716 2026-03-09 03:21:45,186 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/05/CAL/solo_CAL_stix-cal-energy_20221205T170101-20221205T192500_V02.fits 2026-03-09 03:21:45,357 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_us_oq_bd 2026-03-09 03:21:45,358 Read config from in: /tmp/ecc_context_ecc_cfg_1_us_oq_bd/post_ecc.ini 2026-03-09 03:21:46,612 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_us_oq_bd/solo_L1_stix-cal-energy_20221214_V03_ecc_in.fits 2026-03-09 03:30:31,436 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221214_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221214_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 03:30:37,649 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 03:30:37,655 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_us_oq_bd 2026-03-09 03:30:37,685 No soops found for time: 2022-12-14 18:03:23.694525 - 2022-12-14 20:27:22.709566 2026-03-09 03:30:37,783 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/14/CAL/solo_CAL_stix-cal-energy_20221214T180323-20221214T202722_V02.fits 2026-03-09 03:30:37,949 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wsoazqti 2026-03-09 03:30:37,949 Read config from in: /tmp/ecc_context_ecc_cfg_1_wsoazqti/post_ecc.ini 2026-03-09 03:30:39,199 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wsoazqti/solo_L1_stix-cal-energy_20221207_V03_ecc_in.fits 2026-03-09 03:39:19,286 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221207_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221207_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 03:39:25,571 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 03:39:25,577 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wsoazqti 2026-03-09 03:39:25,604 No soops found for time: 2022-12-07 17:01:10.635427 - 2022-12-07 19:25:09.650452 2026-03-09 03:39:25,698 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/07/CAL/solo_CAL_stix-cal-energy_20221207T170110-20221207T192509_V02.fits 2026-03-09 03:39:25,854 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vw8hbmre 2026-03-09 03:39:25,854 Read config from in: /tmp/ecc_context_ecc_cfg_1_vw8hbmre/post_ecc.ini 2026-03-09 03:39:27,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vw8hbmre/solo_L1_stix-cal-energy_20221220_V03_ecc_in.fits 2026-03-09 03:48:21,897 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 03:48:28,198 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 03:48:28,205 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vw8hbmre 2026-03-09 03:48:28,231 No soops found for time: 2022-12-20 18:34:27.597621 - 2022-12-20 20:58:26.612605 2026-03-09 03:48:28,326 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/20/CAL/solo_CAL_stix-cal-energy_20221220T183427-20221220T205826_V02.fits 2026-03-09 03:48:28,491 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_80kl5smc 2026-03-09 03:48:28,491 Read config from in: /tmp/ecc_context_ecc_cfg_1_80kl5smc/post_ecc.ini 2026-03-09 03:48:29,755 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_80kl5smc/solo_L1_stix-cal-energy_20221206_V03_ecc_in.fits 2026-03-09 03:57:13,812 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 03:57:20,038 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 03:57:20,045 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_80kl5smc 2026-03-09 03:57:20,071 No soops found for time: 2022-12-06 17:01:05.486391 - 2022-12-06 19:25:05.501465 2026-03-09 03:57:20,165 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/06/CAL/solo_CAL_stix-cal-energy_20221206T170105-20221206T192505_V02.fits 2026-03-09 03:57:20,322 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gs9e8jsw 2026-03-09 03:57:20,323 Read config from in: /tmp/ecc_context_ecc_cfg_1_gs9e8jsw/post_ecc.ini 2026-03-09 03:57:23,018 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gs9e8jsw/solo_L1_stix-cal-energy_20221203_V03_ecc_in.fits 2026-03-09 04:06:09,128 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221203_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221203_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 04:06:15,615 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 04:06:15,623 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gs9e8jsw 2026-03-09 04:06:15,651 No soops found for time: 2022-12-03 02:13:01.941209 - 2022-12-03 04:37:00.956281 2026-03-09 04:06:15,746 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/03/CAL/solo_CAL_stix-cal-energy_20221203T021301-20221203T043700_V02.fits 2026-03-09 04:06:15,912 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sppwbm38 2026-03-09 04:06:15,912 Read config from in: /tmp/ecc_context_ecc_cfg_1_sppwbm38/post_ecc.ini 2026-03-09 04:06:17,164 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sppwbm38/solo_L1_stix-cal-energy_20221217_V03_ecc_in.fits 2026-03-09 04:15:09,925 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221217_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221217_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 04:15:16,268 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 04:15:16,275 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sppwbm38 2026-03-09 04:15:16,299 No soops found for time: 2022-12-17 18:34:13.149033 - 2022-12-17 20:58:13.164076 2026-03-09 04:15:16,393 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/17/CAL/solo_CAL_stix-cal-energy_20221217T183413-20221217T205813_V02.fits 2026-03-09 04:15:16,551 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sr5nkxka 2026-03-09 04:15:16,552 Read config from in: /tmp/ecc_context_ecc_cfg_1_sr5nkxka/post_ecc.ini 2026-03-09 04:15:17,790 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sr5nkxka/solo_L1_stix-cal-energy_20221231_V03_ecc_in.fits 2026-03-09 04:24:15,414 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221231_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221231_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221231_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221231_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 04:24:21,593 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 04:24:21,599 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sr5nkxka 2026-03-09 04:24:21,625 No soops found for time: 2022-12-31 19:06:00.249384 - 2022-12-31 21:29:59.264368 2026-03-09 04:24:21,719 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/31/CAL/solo_CAL_stix-cal-energy_20221231T190600-20221231T212959_V02.fits 2026-03-09 04:24:21,876 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_og2dhgda 2026-03-09 04:24:21,877 Read config from in: /tmp/ecc_context_ecc_cfg_1_og2dhgda/post_ecc.ini 2026-03-09 04:24:23,122 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_og2dhgda/solo_L1_stix-cal-energy_20221218_V03_ecc_in.fits 2026-03-09 04:33:34,499 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221218_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221218_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 04:33:40,797 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 04:33:40,803 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_og2dhgda 2026-03-09 04:33:40,830 No soops found for time: 2022-12-18 18:34:18.297881 - 2022-12-18 20:58:17.312866 2026-03-09 04:33:40,926 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/18/CAL/solo_CAL_stix-cal-energy_20221218T183418-20221218T205817_V02.fits 2026-03-09 04:33:41,091 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2urtrfgl 2026-03-09 04:33:41,092 Read config from in: /tmp/ecc_context_ecc_cfg_1_2urtrfgl/post_ecc.ini 2026-03-09 04:33:42,360 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2urtrfgl/solo_L1_stix-cal-energy_20221223_V03_ecc_in.fits 2026-03-09 04:42:32,804 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221223_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221223_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 04:42:39,203 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 04:42:39,212 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2urtrfgl 2026-03-09 04:42:39,249 No soops found for time: 2022-12-23 18:34:41.047230 - 2022-12-23 20:58:40.062214 2026-03-09 04:42:39,352 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/23/CAL/solo_CAL_stix-cal-energy_20221223T183441-20221223T205840_V02.fits 2026-03-09 04:42:39,519 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zk18jss3 2026-03-09 04:42:39,521 Read config from in: /tmp/ecc_context_ecc_cfg_1_zk18jss3/post_ecc.ini 2026-03-09 04:42:40,782 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zk18jss3/solo_L1_stix-cal-energy_20221216_V03_ecc_in.fits 2026-03-09 04:51:30,003 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221216_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221216_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 04:51:37,733 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 04:51:37,740 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zk18jss3 2026-03-09 04:51:37,764 No soops found for time: 2022-12-16 18:34:05.998591 - 2022-12-16 20:58:06.013634 2026-03-09 04:51:37,863 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/16/CAL/solo_CAL_stix-cal-energy_20221216T183405-20221216T205806_V02.fits 2026-03-09 04:51:38,018 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jx4fjexb 2026-03-09 04:51:38,019 Read config from in: /tmp/ecc_context_ecc_cfg_1_jx4fjexb/post_ecc.ini 2026-03-09 04:51:39,273 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jx4fjexb/solo_L1_stix-cal-energy_20221221_V03_ecc_in.fits 2026-03-09 05:00:31,971 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221221_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221221_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 05:00:38,201 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 05:00:38,208 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jx4fjexb 2026-03-09 05:00:38,236 No soops found for time: 2022-12-21 18:34:32.747492 - 2022-12-21 20:58:31.762476 2026-03-09 05:00:38,336 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/21/CAL/solo_CAL_stix-cal-energy_20221221T183432-20221221T205831_V02.fits 2026-03-09 05:00:38,504 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6ijvze4m 2026-03-09 05:00:38,505 Read config from in: /tmp/ecc_context_ecc_cfg_1_6ijvze4m/post_ecc.ini 2026-03-09 05:00:39,751 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6ijvze4m/solo_L1_stix-cal-energy_20221212_V03_ecc_in.fits 2026-03-09 05:09:41,677 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221212_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221212_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 05:09:47,950 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 05:09:47,960 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6ijvze4m 2026-03-09 05:09:47,985 No soops found for time: 2022-12-12 18:01:56.393121 - 2022-12-12 20:25:55.408147 2026-03-09 05:09:48,082 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/12/CAL/solo_CAL_stix-cal-energy_20221212T180156-20221212T202555_V02.fits 2026-03-09 05:09:48,243 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r65chk83 2026-03-09 05:09:48,243 Read config from in: /tmp/ecc_context_ecc_cfg_1_r65chk83/post_ecc.ini 2026-03-09 05:09:49,491 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r65chk83/solo_L1_stix-cal-energy_20221227_V03_ecc_in.fits 2026-03-09 05:18:45,187 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221227_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221227_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 05:18:51,471 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 05:18:51,478 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r65chk83 2026-03-09 05:18:51,506 No soops found for time: 2022-12-27 19:05:40.649902 - 2022-12-27 21:29:40.664889 2026-03-09 05:18:51,604 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/27/CAL/solo_CAL_stix-cal-energy_20221227T190540-20221227T212940_V02.fits 2026-03-09 05:18:51,762 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_aa39jzt3 2026-03-09 05:18:51,763 Read config from in: /tmp/ecc_context_ecc_cfg_1_aa39jzt3/post_ecc.ini 2026-03-09 05:18:53,009 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_aa39jzt3/solo_L1_stix-cal-energy_20221211_V03_ecc_in.fits 2026-03-09 05:27:34,837 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221211_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221211_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 05:27:41,043 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 05:27:41,051 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_aa39jzt3 2026-03-09 05:27:41,077 No soops found for time: 2022-12-11 18:01:52.242844 - 2022-12-11 20:25:51.257869 2026-03-09 05:27:41,172 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/11/CAL/solo_CAL_stix-cal-energy_20221211T180152-20221211T202551_V02.fits 2026-03-09 05:27:41,331 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wp6a3jy9 2026-03-09 05:27:41,331 Read config from in: /tmp/ecc_context_ecc_cfg_1_wp6a3jy9/post_ecc.ini 2026-03-09 05:27:42,573 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wp6a3jy9/solo_L1_stix-cal-energy_20221226_V03_ecc_in.fits 2026-03-09 05:36:44,775 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221226_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221226_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 05:36:51,246 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 05:36:51,257 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wp6a3jy9 2026-03-09 05:36:51,309 No soops found for time: 2022-12-26 19:05:36.500033 - 2022-12-26 21:29:36.515020 2026-03-09 05:36:51,420 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/26/CAL/solo_CAL_stix-cal-energy_20221226T190536-20221226T212936_V02.fits 2026-03-09 05:36:51,588 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_df0akqki 2026-03-09 05:36:51,590 Read config from in: /tmp/ecc_context_ecc_cfg_1_df0akqki/post_ecc.ini 2026-03-09 05:36:52,867 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_df0akqki/solo_L1_stix-cal-energy_20221219_V03_ecc_in.fits 2026-03-09 05:45:40,867 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221219_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221219_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 05:45:48,499 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 05:45:48,506 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_df0akqki 2026-03-09 05:45:48,531 No soops found for time: 2022-12-19 18:34:22.447750 - 2022-12-19 20:58:22.462736 2026-03-09 05:45:48,630 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/19/CAL/solo_CAL_stix-cal-energy_20221219T183422-20221219T205822_V02.fits 2026-03-09 05:45:48,798 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t412k_cx 2026-03-09 05:45:48,799 Read config from in: /tmp/ecc_context_ecc_cfg_1_t412k_cx/post_ecc.ini 2026-03-09 05:45:50,040 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t412k_cx/solo_L1_stix-cal-energy_20221222_V03_ecc_in.fits 2026-03-09 05:54:52,912 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221222_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221222_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 05:54:59,157 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 05:54:59,164 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t412k_cx 2026-03-09 05:54:59,194 No soops found for time: 2022-12-22 18:34:36.897361 - 2022-12-22 20:58:35.912345 2026-03-09 05:54:59,301 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/22/CAL/solo_CAL_stix-cal-energy_20221222T183436-20221222T205835_V02.fits 2026-03-09 05:54:59,469 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6xxdfkvp 2026-03-09 05:54:59,470 Read config from in: /tmp/ecc_context_ecc_cfg_1_6xxdfkvp/post_ecc.ini 2026-03-09 05:55:00,713 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6xxdfkvp/solo_L1_stix-cal-energy_20221225_V03_ecc_in.fits 2026-03-09 06:04:01,991 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221225_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221225_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 06:04:08,343 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 06:04:08,350 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6xxdfkvp 2026-03-09 06:04:08,377 No soops found for time: 2022-12-25 18:34:49.346968 - 2022-12-25 20:58:55.361964 2026-03-09 06:04:08,473 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/25/CAL/solo_CAL_stix-cal-energy_20221225T183449-20221225T205855_V02.fits 2026-03-09 06:04:08,635 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4yp4amho 2026-03-09 06:04:08,635 Read config from in: /tmp/ecc_context_ecc_cfg_1_4yp4amho/post_ecc.ini 2026-03-09 06:04:09,882 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4yp4amho/solo_L1_stix-cal-energy_20221228_V03_ecc_in.fits 2026-03-09 06:13:05,091 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221228_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221228_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 06:13:11,318 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 06:13:11,326 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4yp4amho 2026-03-09 06:13:11,352 No soops found for time: 2022-12-28 19:05:45.799773 - 2022-12-28 21:29:44.814758 2026-03-09 06:13:11,448 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/28/CAL/solo_CAL_stix-cal-energy_20221228T190545-20221228T212944_V02.fits 2026-03-09 06:13:11,603 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rlho122r 2026-03-09 06:13:11,604 Read config from in: /tmp/ecc_context_ecc_cfg_1_rlho122r/post_ecc.ini 2026-03-09 06:13:12,840 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rlho122r/solo_L1_stix-cal-energy_20221209_V03_ecc_in.fits 2026-03-09 06:22:06,685 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 06:22:13,119 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 06:22:13,133 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rlho122r 2026-03-09 06:22:13,192 No soops found for time: 2022-12-09 17:05:45.936447 - 2022-12-09 19:30:37.951565 2026-03-09 06:22:13,308 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/09/CAL/solo_CAL_stix-cal-energy_20221209T170545-20221209T193037_V02.fits 2026-03-09 06:22:13,484 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0cvd5c_i 2026-03-09 06:22:13,485 Read config from in: /tmp/ecc_context_ecc_cfg_1_0cvd5c_i/post_ecc.ini 2026-03-09 06:22:14,732 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0cvd5c_i/solo_L1_stix-cal-energy_20221229_V03_ecc_in.fits 2026-03-09 06:31:17,424 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221229_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221229_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221229_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221229_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 06:31:23,669 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 06:31:23,679 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0cvd5c_i 2026-03-09 06:31:23,709 No soops found for time: 2022-12-29 19:05:49.949642 - 2022-12-29 21:29:49.964628 2026-03-09 06:31:23,805 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/29/CAL/solo_CAL_stix-cal-energy_20221229T190549-20221229T212949_V02.fits 2026-03-09 06:31:23,962 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_veis4b8n 2026-03-09 06:31:23,963 Read config from in: /tmp/ecc_context_ecc_cfg_1_veis4b8n/post_ecc.ini 2026-03-09 06:31:26,660 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_veis4b8n/solo_L1_stix-cal-energy_20221202_V03_ecc_in.fits 2026-03-09 06:40:20,443 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221202_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221202_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 06:40:26,696 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 06:40:26,702 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_veis4b8n 2026-03-09 06:40:26,729 No soops found for time: 2022-12-02 02:12:56.790460 - 2022-12-02 04:36:55.805532 2026-03-09 06:40:26,824 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/02/CAL/solo_CAL_stix-cal-energy_20221202T021256-20221202T043655_V02.fits 2026-03-09 06:40:26,982 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ql3wk9p6 2026-03-09 06:40:26,983 Read config from in: /tmp/ecc_context_ecc_cfg_1_ql3wk9p6/post_ecc.ini 2026-03-09 06:40:28,221 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ql3wk9p6/solo_L1_stix-cal-energy_20221213_V03_ecc_in.fits 2026-03-09 06:49:11,619 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221213_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221213_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 06:49:17,947 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 06:49:17,956 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ql3wk9p6 2026-03-09 06:49:17,983 No soops found for time: 2022-12-13 18:02:00.543399 - 2022-12-13 20:26:03.558999 2026-03-09 06:49:18,082 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/13/CAL/solo_CAL_stix-cal-energy_20221213T180200-20221213T202603_V02.fits 2026-03-09 06:49:18,248 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n7jxf0ua 2026-03-09 06:49:18,249 Read config from in: /tmp/ecc_context_ecc_cfg_1_n7jxf0ua/post_ecc.ini 2026-03-09 06:49:19,507 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n7jxf0ua/solo_L1_stix-cal-energy_20221215_V03_ecc_in.fits 2026-03-09 06:57:58,124 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221215_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221215_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 06:58:04,395 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 06:58:04,402 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n7jxf0ua 2026-03-09 06:58:04,431 No soops found for time: 2022-12-15 18:03:27.844962 - 2022-12-15 20:29:00.860166 2026-03-09 06:58:04,527 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/15/CAL/solo_CAL_stix-cal-energy_20221215T180327-20221215T202900_V02.fits 2026-03-09 06:58:04,692 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_25c4tuet 2026-03-09 06:58:04,692 Read config from in: /tmp/ecc_context_ecc_cfg_1_25c4tuet/post_ecc.ini 2026-03-09 06:58:05,930 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_25c4tuet/solo_L1_stix-cal-energy_20221204_V03_ecc_in.fits 2026-03-09 07:06:54,747 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221204_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221204_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 07:07:00,997 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 07:07:01,004 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_25c4tuet 2026-03-09 07:07:01,034 No soops found for time: 2022-12-04 02:13:06.091956 - 2022-12-04 04:37:06.107030 2026-03-09 07:07:01,131 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/12/04/CAL/solo_CAL_stix-cal-energy_20221204T021306-20221204T043706_V02.fits 2026-03-09 07:07:01,296 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m53j6hz7 2026-03-09 07:07:01,296 Read config from in: /tmp/ecc_context_ecc_cfg_1_m53j6hz7/post_ecc.ini 2026-03-09 07:07:02,554 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m53j6hz7/solo_L1_stix-cal-energy_20221130_V03_ecc_in.fits 2026-03-09 07:15:53,939 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221130_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221130_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 07:16:00,216 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 07:16:00,223 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m53j6hz7 2026-03-09 07:16:00,249 No soops found for time: 2022-11-30 02:12:47.488964 - 2022-11-30 04:36:46.504037 2026-03-09 07:16:00,343 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/30/CAL/solo_CAL_stix-cal-energy_20221130T021247-20221130T043646_V02.fits 2026-03-09 07:16:00,509 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7tazyn55 2026-03-09 07:16:00,510 Read config from in: /tmp/ecc_context_ecc_cfg_1_7tazyn55/post_ecc.ini 2026-03-09 07:16:01,768 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7tazyn55/solo_L1_stix-cal-energy_20221110_V03_ecc_in.fits 2026-03-09 07:24:44,922 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221110_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221110_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 07:24:52,609 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 07:24:52,615 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7tazyn55 2026-03-09 07:24:52,640 Soop found: SOOP 2026-03-09 07:24:52,733 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/10/CAL/solo_CAL_stix-cal-energy_20221110T181700-20221110T204059_V02.fits 2026-03-09 07:24:52,891 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c0qi1dez 2026-03-09 07:24:52,892 Read config from in: /tmp/ecc_context_ecc_cfg_1_c0qi1dez/post_ecc.ini 2026-03-09 07:24:54,125 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c0qi1dez/solo_L1_stix-cal-energy_20221101_V03_ecc_in.fits 2026-03-09 07:34:00,844 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 07:34:07,097 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 07:34:07,106 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c0qi1dez 2026-03-09 07:34:07,134 Soop found: SOOP 2026-03-09 07:34:07,234 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/01/CAL/solo_CAL_stix-cal-energy_20221101T001601-20221101T024000_V02.fits 2026-03-09 07:34:07,392 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c0wmwht1 2026-03-09 07:34:07,392 Read config from in: /tmp/ecc_context_ecc_cfg_1_c0wmwht1/post_ecc.ini 2026-03-09 07:34:08,645 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c0wmwht1/solo_L1_stix-cal-energy_20221124_V03_ecc_in.fits 2026-03-09 07:42:50,220 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 07:42:56,446 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 07:42:56,453 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c0wmwht1 2026-03-09 07:42:56,478 No soops found for time: 2022-11-24 03:23:40.591946 - 2022-11-24 05:47:40.607020 2026-03-09 07:42:56,571 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/24/CAL/solo_CAL_stix-cal-energy_20221124T032340-20221124T054740_V02.fits 2026-03-09 07:42:56,726 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7tg9o3cx 2026-03-09 07:42:56,727 Read config from in: /tmp/ecc_context_ecc_cfg_1_7tg9o3cx/post_ecc.ini 2026-03-09 07:42:57,971 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7tg9o3cx/solo_L1_stix-cal-energy_20221108_V03_ecc_in.fits 2026-03-09 07:51:48,159 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221108_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221108_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 07:51:54,405 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 07:51:54,411 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7tg9o3cx 2026-03-09 07:51:54,440 Soop found: SOOP 2026-03-09 07:51:54,535 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/08/CAL/solo_CAL_stix-cal-energy_20221108T181652-20221108T204052_V02.fits 2026-03-09 07:51:54,694 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2qxa0dh9 2026-03-09 07:51:54,694 Read config from in: /tmp/ecc_context_ecc_cfg_1_2qxa0dh9/post_ecc.ini 2026-03-09 07:51:55,937 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2qxa0dh9/solo_L1_stix-cal-energy_20221114_V03_ecc_in.fits 2026-03-09 08:00:35,983 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 08:00:42,265 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 08:00:42,271 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2qxa0dh9 2026-03-09 08:00:42,297 No soops found for time: 2022-11-14 01:36:01.073540 - 2022-11-14 04:00:01.088658 2026-03-09 08:00:42,392 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/14/CAL/solo_CAL_stix-cal-energy_20221114T013601-20221114T040001_V02.fits 2026-03-09 08:00:42,547 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bxc7vjie 2026-03-09 08:00:42,547 Read config from in: /tmp/ecc_context_ecc_cfg_1_bxc7vjie/post_ecc.ini 2026-03-09 08:00:43,787 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bxc7vjie/solo_L1_stix-cal-energy_20221117_V03_ecc_in.fits 2026-03-09 08:09:26,997 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221117_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221117_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 08:09:33,230 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 08:09:33,236 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bxc7vjie 2026-03-09 08:09:33,262 No soops found for time: 2022-11-17 01:36:16.525945 - 2022-11-17 04:04:22.541471 2026-03-09 08:09:33,356 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/17/CAL/solo_CAL_stix-cal-energy_20221117T013616-20221117T040422_V02.fits 2026-03-09 08:09:33,516 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1c_n6h1m 2026-03-09 08:09:33,516 Read config from in: /tmp/ecc_context_ecc_cfg_1_1c_n6h1m/post_ecc.ini 2026-03-09 08:09:34,762 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1c_n6h1m/solo_L1_stix-cal-energy_20221118_V03_ecc_in.fits 2026-03-09 08:18:28,266 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221118_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221118_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 08:18:35,928 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 08:18:35,934 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1c_n6h1m 2026-03-09 08:18:35,958 No soops found for time: 2022-11-18 02:17:22.681214 - 2022-11-18 04:41:21.696309 2026-03-09 08:18:36,051 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/18/CAL/solo_CAL_stix-cal-energy_20221118T021722-20221118T044121_V02.fits 2026-03-09 08:18:36,205 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4jkvy_9x 2026-03-09 08:18:36,206 Read config from in: /tmp/ecc_context_ecc_cfg_1_4jkvy_9x/post_ecc.ini 2026-03-09 08:18:37,435 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4jkvy_9x/solo_L1_stix-cal-energy_20221123_V03_ecc_in.fits 2026-03-09 08:27:29,052 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221123_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221123_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 08:27:35,307 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 08:27:35,315 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4jkvy_9x 2026-03-09 08:27:35,344 No soops found for time: 2022-11-23 03:23:36.441199 - 2022-11-23 05:47:35.456271 2026-03-09 08:27:35,444 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/23/CAL/solo_CAL_stix-cal-energy_20221123T032336-20221123T054735_V02.fits 2026-03-09 08:27:35,614 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a5fvp96n 2026-03-09 08:27:35,616 Read config from in: /tmp/ecc_context_ecc_cfg_1_a5fvp96n/post_ecc.ini 2026-03-09 08:27:36,862 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a5fvp96n/solo_L1_stix-cal-energy_20221116_V03_ecc_in.fits 2026-03-09 08:36:28,852 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221116_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221116_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 08:36:35,108 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 08:36:35,115 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a5fvp96n 2026-03-09 08:36:35,141 No soops found for time: 2022-11-16 01:36:11.375909 - 2022-11-16 04:00:10.391025 2026-03-09 08:36:35,234 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/16/CAL/solo_CAL_stix-cal-energy_20221116T013611-20221116T040010_V02.fits 2026-03-09 08:36:35,408 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_04j_qs5i 2026-03-09 08:36:35,408 Read config from in: /tmp/ecc_context_ecc_cfg_1_04j_qs5i/post_ecc.ini 2026-03-09 08:36:36,654 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_04j_qs5i/solo_L1_stix-cal-energy_20221121_V03_ecc_in.fits 2026-03-09 08:45:30,580 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221121_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221121_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 08:45:36,841 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 08:45:36,847 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_04j_qs5i 2026-03-09 08:45:36,874 No soops found for time: 2022-11-21 01:56:01.130550 - 2022-11-21 04:20:13.145645 2026-03-09 08:45:36,968 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/21/CAL/solo_CAL_stix-cal-energy_20221121T015601-20221121T042013_V02.fits 2026-03-09 08:45:37,123 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_12dfgql6 2026-03-09 08:45:37,124 Read config from in: /tmp/ecc_context_ecc_cfg_1_12dfgql6/post_ecc.ini 2026-03-09 08:45:38,386 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_12dfgql6/solo_L1_stix-cal-energy_20221112_V03_ecc_in.fits 2026-03-09 08:54:27,317 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221112_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221112_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 08:54:33,664 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 08:54:33,671 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_12dfgql6 2026-03-09 08:54:33,699 No soops found for time: 2022-11-12 18:17:09.862494 - 2022-11-12 20:41:09.877259 2026-03-09 08:54:33,794 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/12/CAL/solo_CAL_stix-cal-energy_20221112T181709-20221112T204109_V02.fits 2026-03-09 08:54:33,953 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6zy6vkzn 2026-03-09 08:54:33,953 Read config from in: /tmp/ecc_context_ecc_cfg_1_6zy6vkzn/post_ecc.ini 2026-03-09 08:54:35,207 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6zy6vkzn/solo_L1_stix-cal-energy_20221111_V03_ecc_in.fits 2026-03-09 09:03:25,433 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221111_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221111_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 09:03:31,703 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 09:03:31,710 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6zy6vkzn 2026-03-09 09:03:31,738 No soops found for time: 2022-11-11 18:17:04.714835 - 2022-11-11 20:41:04.729600 2026-03-09 09:03:31,835 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/11/CAL/solo_CAL_stix-cal-energy_20221111T181704-20221111T204104_V02.fits 2026-03-09 09:03:33,528 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vfgaa2i5 2026-03-09 09:03:33,529 Read config from in: /tmp/ecc_context_ecc_cfg_1_vfgaa2i5/post_ecc.ini 2026-03-09 09:03:34,773 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vfgaa2i5/solo_L1_stix-cal-energy_20221126_V03_ecc_in.fits 2026-03-09 09:12:18,993 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221126_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221126_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 09:12:25,243 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 09:12:25,250 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vfgaa2i5 2026-03-09 09:12:25,276 No soops found for time: 2022-11-26 03:23:51.893445 - 2022-11-26 05:47:51.908519 2026-03-09 09:12:25,371 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/26/CAL/solo_CAL_stix-cal-energy_20221126T032351-20221126T054751_V02.fits 2026-03-09 09:12:25,531 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1anoc6w2 2026-03-09 09:12:25,531 Read config from in: /tmp/ecc_context_ecc_cfg_1_1anoc6w2/post_ecc.ini 2026-03-09 09:12:26,780 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1anoc6w2/solo_L1_stix-cal-energy_20221119_V03_ecc_in.fits 2026-03-09 09:21:10,089 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221119_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221119_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 09:21:16,262 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 09:21:16,269 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1anoc6w2 2026-03-09 09:21:16,294 No soops found for time: 2022-11-19 02:17:26.832182 - 2022-11-19 04:41:26.847278 2026-03-09 09:21:16,389 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/19/CAL/solo_CAL_stix-cal-energy_20221119T021726-20221119T044126_V02.fits 2026-03-09 09:21:16,549 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rl0ar241 2026-03-09 09:21:16,550 Read config from in: /tmp/ecc_context_ecc_cfg_1_rl0ar241/post_ecc.ini 2026-03-09 09:21:17,788 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rl0ar241/solo_L1_stix-cal-energy_20221122_V03_ecc_in.fits 2026-03-09 09:29:53,480 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221122_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221122_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 09:30:00,360 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 09:30:00,367 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rl0ar241 2026-03-09 09:30:00,398 No soops found for time: 2022-11-22 03:23:32.290452 - 2022-11-22 05:47:31.305524 2026-03-09 09:30:00,499 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/22/CAL/solo_CAL_stix-cal-energy_20221122T032332-20221122T054731_V02.fits 2026-03-09 09:30:00,665 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xr5z_hzx 2026-03-09 09:30:00,665 Read config from in: /tmp/ecc_context_ecc_cfg_1_xr5z_hzx/post_ecc.ini 2026-03-09 09:30:01,957 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xr5z_hzx/solo_L1_stix-cal-energy_20221125_V03_ecc_in.fits 2026-03-09 09:38:55,255 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221125_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221125_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 09:39:01,527 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 09:39:01,533 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xr5z_hzx 2026-03-09 09:39:01,560 No soops found for time: 2022-11-25 03:23:46.742696 - 2022-11-25 05:47:46.757770 2026-03-09 09:39:01,656 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/25/CAL/solo_CAL_stix-cal-energy_20221125T032346-20221125T054746_V02.fits 2026-03-09 09:39:01,808 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u6pu7fpp 2026-03-09 09:39:01,809 Read config from in: /tmp/ecc_context_ecc_cfg_1_u6pu7fpp/post_ecc.ini 2026-03-09 09:39:03,060 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u6pu7fpp/solo_L1_stix-cal-energy_20221128_V03_ecc_in.fits 2026-03-09 09:47:50,360 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221128_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221128_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 09:47:56,753 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 09:47:56,760 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u6pu7fpp 2026-03-09 09:47:56,788 No soops found for time: 2022-11-28 02:06:01.186776 - 2022-11-28 04:30:00.201848 2026-03-09 09:47:56,883 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/28/CAL/solo_CAL_stix-cal-energy_20221128T020601-20221128T043000_V02.fits 2026-03-09 09:47:57,046 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6ollxkew 2026-03-09 09:47:57,046 Read config from in: /tmp/ecc_context_ecc_cfg_1_6ollxkew/post_ecc.ini 2026-03-09 09:47:58,302 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6ollxkew/solo_L1_stix-cal-energy_20221109_V03_ecc_in.fits 2026-03-09 09:56:32,907 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221109_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221109_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 09:56:40,618 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 09:56:40,624 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6ollxkew 2026-03-09 09:56:40,649 Soop found: SOOP 2026-03-09 09:56:40,742 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/09/CAL/solo_CAL_stix-cal-energy_20221109T181656-20221109T204055_V02.fits 2026-03-09 09:56:40,902 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1xx6azte 2026-03-09 09:56:40,902 Read config from in: /tmp/ecc_context_ecc_cfg_1_1xx6azte/post_ecc.ini 2026-03-09 09:56:42,137 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1xx6azte/solo_L1_stix-cal-energy_20221129_V03_ecc_in.fits 2026-03-09 10:05:36,922 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221129_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221129_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 10:05:43,196 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 10:05:43,204 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1xx6azte 2026-03-09 10:05:43,230 No soops found for time: 2022-11-29 02:06:05.337523 - 2022-11-29 04:30:18.352620 2026-03-09 10:05:43,324 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/29/CAL/solo_CAL_stix-cal-energy_20221129T020605-20221129T043018_V02.fits 2026-03-09 10:05:43,481 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_baztme0f 2026-03-09 10:05:43,482 Read config from in: /tmp/ecc_context_ecc_cfg_1_baztme0f/post_ecc.ini 2026-03-09 10:05:44,717 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_baztme0f/solo_L1_stix-cal-energy_20221102_V03_ecc_in.fits 2026-03-09 10:15:02,170 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221102_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221102_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 10:15:08,480 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 10:15:08,487 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_baztme0f 2026-03-09 10:15:08,515 Soop found: SOOP 2026-03-09 10:15:08,610 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/02/CAL/solo_CAL_stix-cal-energy_20221102T001606-20221102T024005_V02.fits 2026-03-09 10:15:08,769 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_aql2sz0j 2026-03-09 10:15:08,769 Read config from in: /tmp/ecc_context_ecc_cfg_1_aql2sz0j/post_ecc.ini 2026-03-09 10:15:10,009 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_aql2sz0j/solo_L1_stix-cal-energy_20221115_V03_ecc_in.fits 2026-03-09 10:23:54,770 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20221115_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20221115_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20221115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20221115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 10:24:00,990 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 10:24:00,996 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_aql2sz0j 2026-03-09 10:24:01,021 No soops found for time: 2022-11-15 01:36:06.224725 - 2022-11-15 04:00:05.239840 2026-03-09 10:24:01,116 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/11/15/CAL/solo_CAL_stix-cal-energy_20221115T013606-20221115T040005_V02.fits 2026-03-09 10:24:01,276 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__iyzb5vn 2026-03-09 10:24:01,277 Read config from in: /tmp/ecc_context_ecc_cfg_1__iyzb5vn/post_ecc.ini 2026-03-09 10:24:02,533 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__iyzb5vn/solo_L1_stix-cal-energy_20220930_V03_ecc_in.fits 2026-03-09 10:33:54,662 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220930_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220930_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220930_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220930_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 10:34:00,914 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 10:34:00,921 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__iyzb5vn 2026-03-09 10:34:00,952 No soops found for time: 2022-09-30 18:24:41.305272 - 2022-09-30 20:51:12.320811 2026-03-09 10:34:01,048 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/30/CAL/solo_CAL_stix-cal-energy_20220930T182441-20220930T205112_V02.fits 2026-03-09 10:34:01,209 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ia8uh55q 2026-03-09 10:34:01,209 Read config from in: /tmp/ecc_context_ecc_cfg_1_ia8uh55q/post_ecc.ini 2026-03-09 10:34:02,451 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ia8uh55q/solo_L1_stix-cal-energy_20220910_V03_ecc_in.fits 2026-03-09 10:42:49,662 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220910_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220910_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220910_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220910_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 10:42:55,917 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 10:42:55,925 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ia8uh55q 2026-03-09 10:42:55,951 No soops found for time: 2022-09-10 05:00:19.184357 - 2022-09-10 07:25:55.199558 2026-03-09 10:42:56,044 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/10/CAL/solo_CAL_stix-cal-energy_20220910T050019-20220910T072555_V02.fits 2026-03-09 10:42:56,200 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2bkk0jmz 2026-03-09 10:42:56,201 Read config from in: /tmp/ecc_context_ecc_cfg_1_2bkk0jmz/post_ecc.ini 2026-03-09 10:42:58,755 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2bkk0jmz/solo_L1_stix-cal-energy_20220901_V03_ecc_in.fits 2026-03-09 10:51:49,192 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220901_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220901_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220901_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220901_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 10:51:55,424 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 10:51:55,432 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2bkk0jmz 2026-03-09 10:51:55,462 No soops found for time: 2022-09-01 09:06:14.857378 - 2022-09-01 11:30:14.872445 2026-03-09 10:51:55,562 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/01/CAL/solo_CAL_stix-cal-energy_20220901T090614-20220901T113014_V02.fits 2026-03-09 10:51:55,719 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ijknjigl 2026-03-09 10:51:55,720 Read config from in: /tmp/ecc_context_ecc_cfg_1_ijknjigl/post_ecc.ini 2026-03-09 10:51:56,969 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ijknjigl/solo_L1_stix-cal-energy_20220924_V03_ecc_in.fits 2026-03-09 11:01:22,924 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220924_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220924_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220924_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220924_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 11:01:29,283 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 11:01:29,293 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ijknjigl 2026-03-09 11:01:29,330 No soops found for time: 2022-09-24 11:13:41.343804 - 2022-09-24 13:37:41.359014 2026-03-09 11:01:29,444 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/24/CAL/solo_CAL_stix-cal-energy_20220924T111341-20220924T133741_V02.fits 2026-03-09 11:01:29,615 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_srq0agdt 2026-03-09 11:01:29,616 Read config from in: /tmp/ecc_context_ecc_cfg_1_srq0agdt/post_ecc.ini 2026-03-09 11:01:30,875 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_srq0agdt/solo_L1_stix-cal-energy_20220908_V03_ecc_in.fits 2026-03-09 11:10:33,945 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220908_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220908_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220908_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220908_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 11:10:40,275 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 11:10:40,283 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_srq0agdt 2026-03-09 11:10:40,320 No soops found for time: 2022-09-08 04:43:58.881953 - 2022-09-08 07:07:57.896987 2026-03-09 11:10:40,421 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/08/CAL/solo_CAL_stix-cal-energy_20220908T044358-20220908T070757_V02.fits 2026-03-09 11:10:40,588 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_419kbd77 2026-03-09 11:10:40,590 Read config from in: /tmp/ecc_context_ecc_cfg_1_419kbd77/post_ecc.ini 2026-03-09 11:10:41,844 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_419kbd77/solo_L1_stix-cal-energy_20220905_V03_ecc_in.fits 2026-03-09 11:19:36,480 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220905_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220905_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220905_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220905_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 11:19:42,860 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 11:19:42,866 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_419kbd77 2026-03-09 11:19:42,892 No soops found for time: 2022-09-05 04:36:15.430101 - 2022-09-05 07:00:15.445136 2026-03-09 11:19:42,986 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/05/CAL/solo_CAL_stix-cal-energy_20220905T043615-20220905T070015_V02.fits 2026-03-09 11:19:43,144 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_at_ykps1 2026-03-09 11:19:43,145 Read config from in: /tmp/ecc_context_ecc_cfg_1_at_ykps1/post_ecc.ini 2026-03-09 11:19:44,391 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_at_ykps1/solo_L1_stix-cal-energy_20220914_V03_ecc_in.fits 2026-03-09 11:28:36,374 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220914_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220914_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220914_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220914_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 11:28:42,761 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 11:28:42,767 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_at_ykps1 2026-03-09 11:28:42,793 No soops found for time: 2022-09-14 04:46:10.785869 - 2022-09-14 07:11:36.801094 2026-03-09 11:28:42,886 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/14/CAL/solo_CAL_stix-cal-energy_20220914T044610-20220914T071136_V02.fits 2026-03-09 11:28:43,044 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__2ao96wu 2026-03-09 11:28:43,045 Read config from in: /tmp/ecc_context_ecc_cfg_1__2ao96wu/post_ecc.ini 2026-03-09 11:28:44,287 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__2ao96wu/solo_L1_stix-cal-energy_20220907_V03_ecc_in.fits 2026-03-09 11:38:49,505 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220907_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220907_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220907_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220907_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 11:38:58,265 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-09 11:38:58,268 ECC result Gain_Prime 0.0 for DET 29 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 11:38:58,268 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 11:38:58,273 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__2ao96wu 2026-03-09 11:38:58,297 No soops found for time: 2022-09-07 04:43:50.731591 - 2022-09-07 07:07:50.746626 2026-03-09 11:38:58,389 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/07/CAL/solo_CAL_stix-cal-energy_20220907T044350-20220907T070750_V02.fits 2026-03-09 11:38:58,547 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2k8wf3s0 2026-03-09 11:38:58,548 Read config from in: /tmp/ecc_context_ecc_cfg_1_2k8wf3s0/post_ecc.ini 2026-03-09 11:38:59,788 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2k8wf3s0/solo_L1_stix-cal-energy_20220920_V03_ecc_in.fits 2026-03-09 11:47:44,409 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220920_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220920_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220920_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220920_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 11:47:50,573 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 11:47:50,580 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2k8wf3s0 2026-03-09 11:47:50,605 No soops found for time: 2022-09-20 03:33:55.688685 - 2022-09-20 05:57:55.703902 2026-03-09 11:47:50,698 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/20/CAL/solo_CAL_stix-cal-energy_20220920T033355-20220920T055755_V02.fits 2026-03-09 11:47:50,856 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8ltt0i6d 2026-03-09 11:47:50,857 Read config from in: /tmp/ecc_context_ecc_cfg_1_8ltt0i6d/post_ecc.ini 2026-03-09 11:47:52,091 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8ltt0i6d/solo_L1_stix-cal-energy_20220906_V03_ecc_in.fits 2026-03-09 12:00:45,776 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220906_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220906_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220906_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220906_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 12:00:55,038 Run ecc post fit: replaced [97.7 %] gain offset pairs with 'better fits' 2026-03-09 12:00:55,040 ECC result Gain_Prime 1.612116206849646 for DET 6 PIX 7 exceeds Max_Gain 1.4, but not in ignore list 2026-03-09 12:00:55,040 ECC result Gain_Prime 0.0 for DET 4 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:00:55,040 ECC result Gain_Prime 0.0 for DET 8 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:00:55,040 ECC result Gain_Prime 0.0 for DET 12 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:00:55,040 ECC result Gain_Prime 0.0 for DET 16 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:00:55,041 ECC result Gain_Prime 0.0 for DET 21 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:00:55,041 ECC result Gain_Prime 0.0 for DET 27 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:00:55,041 ECC result Gain_Prime 0.0 for DET 28 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:00:55,041 ECC result Gain_Prime 0.0 for DET 32 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:00:55,046 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8ltt0i6d 2026-03-09 12:00:55,071 No soops found for time: 2022-09-06 04:36:20.580459 - 2022-09-06 07:01:04.595570 2026-03-09 12:00:55,167 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/06/CAL/solo_CAL_stix-cal-energy_20220906T043620-20220906T070104_V02.fits 2026-03-09 12:00:55,325 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qiiisy1y 2026-03-09 12:00:55,326 Read config from in: /tmp/ecc_context_ecc_cfg_1_qiiisy1y/post_ecc.ini 2026-03-09 12:00:56,580 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qiiisy1y/solo_L1_stix-cal-energy_20220903_V03_ecc_in.fits 2026-03-09 12:14:36,478 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220903_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220903_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220903_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220903_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 12:14:42,715 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 12:14:42,722 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qiiisy1y 2026-03-09 12:14:42,749 No soops found for time: 2022-09-03 09:06:25.158728 - 2022-09-03 10:34:46.167972 2026-03-09 12:14:42,843 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/03/CAL/solo_CAL_stix-cal-energy_20220903T090625-20220903T103446_V02.fits 2026-03-09 12:14:43,000 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o6p0jj_2 2026-03-09 12:14:43,001 Read config from in: /tmp/ecc_context_ecc_cfg_1_o6p0jj_2/post_ecc.ini 2026-03-09 12:14:44,247 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o6p0jj_2/solo_L1_stix-cal-energy_20220917_V03_ecc_in.fits 2026-03-09 12:23:42,099 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220917_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220917_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220917_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220917_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 12:23:48,402 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 12:23:48,409 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o6p0jj_2 2026-03-09 12:23:48,437 No soops found for time: 2022-09-17 07:42:17.256559 - 2022-09-17 09:32:03.268051 2026-03-09 12:23:48,533 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/17/CAL/solo_CAL_stix-cal-energy_20220917T074217-20220917T093203_V02.fits 2026-03-09 12:23:48,723 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fj2028gx 2026-03-09 12:23:48,724 Read config from in: /tmp/ecc_context_ecc_cfg_1_fj2028gx/post_ecc.ini 2026-03-09 12:23:49,976 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fj2028gx/solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits 2026-03-09 12:32:16,371 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 12:32:23,331 Run ecc post fit: replaced [99.0 %] gain offset pairs with 'better fits' 2026-03-09 12:32:23,333 ECC result Gain_Prime 0.0 for DET 11 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:32:23,334 ECC result Gain_Prime 0.0 for DET 23 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:32:23,334 ECC result Gain_Prime 0.0 for DET 27 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:32:23,334 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-09 12:32:23,339 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fj2028gx 2026-03-09 12:32:23,370 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gcp6j28m 2026-03-09 12:32:23,370 Read config from in: /tmp/ecc_context_ecc_cfg_1_gcp6j28m/post_ecc.ini 2026-03-09 12:32:26,204 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gcp6j28m/solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits 2026-03-09 12:41:21,637 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220918_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 12:41:27,883 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 12:41:27,890 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gcp6j28m 2026-03-09 12:41:27,916 No soops found for time: 2022-09-18 02:05:38.372068 - 2022-09-18 02:13:08.372853 2026-03-09 12:41:28,012 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/18/CAL/solo_CAL_stix-cal-energy_20220918T020538-20220918T021308_V02.fits 2026-03-09 12:41:28,050 No soops found for time: 2022-09-18 03:21:38.380024 - 2022-09-18 05:45:37.395097 2026-03-09 12:41:28,143 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/18/CAL/solo_CAL_stix-cal-energy_20220918T032138-20220918T054537_V02.fits 2026-03-09 12:41:28,308 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_twl4serp 2026-03-09 12:41:28,309 Read config from in: /tmp/ecc_context_ecc_cfg_1_twl4serp/post_ecc.ini 2026-03-09 12:41:29,755 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_twl4serp/solo_L1_stix-cal-energy_20220923_V03_ecc_in.fits 2026-03-09 12:50:28,409 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220923_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220923_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220923_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220923_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 12:50:34,621 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 12:50:34,628 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_twl4serp 2026-03-09 12:50:34,653 No soops found for time: 2022-09-23 03:34:10.145230 - 2022-09-23 06:38:41.164729 2026-03-09 12:50:34,749 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/23/CAL/solo_CAL_stix-cal-energy_20220923T033410-20220923T063841_V02.fits 2026-03-09 12:50:34,906 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dqnxis_t 2026-03-09 12:50:34,906 Read config from in: /tmp/ecc_context_ecc_cfg_1_dqnxis_t/post_ecc.ini 2026-03-09 12:50:36,152 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dqnxis_t/solo_L1_stix-cal-energy_20220916_V03_ecc_in.fits 2026-03-09 12:59:16,493 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220916_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220916_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220916_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220916_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 12:59:22,788 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 12:59:22,795 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dqnxis_t 2026-03-09 12:59:22,821 No soops found for time: 2022-09-16 07:42:12.105799 - 2022-09-16 10:06:11.120872 2026-03-09 12:59:22,917 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/16/CAL/solo_CAL_stix-cal-energy_20220916T074212-20220916T100611_V02.fits 2026-03-09 12:59:23,069 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nzz5t8ib 2026-03-09 12:59:23,070 Read config from in: /tmp/ecc_context_ecc_cfg_1_nzz5t8ib/post_ecc.ini 2026-03-09 12:59:24,451 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nzz5t8ib/solo_L1_stix-cal-energy_20220921_V03_ecc_in.fits 2026-03-09 13:08:15,565 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220921_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220921_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220921_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220921_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 13:08:21,837 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 13:08:21,845 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nzz5t8ib 2026-03-09 13:08:21,871 No soops found for time: 2022-09-21 03:34:00.840867 - 2022-09-21 05:58:00.856084 2026-03-09 13:08:21,964 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/21/CAL/solo_CAL_stix-cal-energy_20220921T033400-20220921T055800_V02.fits 2026-03-09 13:08:22,123 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xz_sjc1a 2026-03-09 13:08:22,124 Read config from in: /tmp/ecc_context_ecc_cfg_1_xz_sjc1a/post_ecc.ini 2026-03-09 13:08:23,378 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xz_sjc1a/solo_L1_stix-cal-energy_20220912_V03_ecc_in.fits 2026-03-09 13:17:40,189 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220912_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220912_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220912_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220912_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 13:17:46,470 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 13:17:46,477 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xz_sjc1a 2026-03-09 13:17:46,505 No soops found for time: 2022-09-12 04:46:00.483559 - 2022-09-12 07:10:00.498594 2026-03-09 13:17:46,601 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/12/CAL/solo_CAL_stix-cal-energy_20220912T044600-20220912T071000_V02.fits 2026-03-09 13:17:46,774 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_55bhylrv 2026-03-09 13:17:46,774 Read config from in: /tmp/ecc_context_ecc_cfg_1_55bhylrv/post_ecc.ini 2026-03-09 13:17:48,022 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_55bhylrv/solo_L1_stix-cal-energy_20220927_V03_ecc_in.fits 2026-03-09 13:31:33,238 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220927_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220927_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220927_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220927_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 13:31:42,324 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-09 13:31:42,331 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_55bhylrv 2026-03-09 13:31:42,356 No soops found for time: 2022-09-27 06:41:08.772786 - 2022-09-27 09:50:35.792878 2026-03-09 13:31:42,450 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/27/CAL/solo_CAL_stix-cal-energy_20220927T064108-20220927T095035_V02.fits 2026-03-09 13:31:42,608 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9ojv0ao3 2026-03-09 13:31:42,609 Read config from in: /tmp/ecc_context_ecc_cfg_1_9ojv0ao3/post_ecc.ini 2026-03-09 13:31:43,853 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9ojv0ao3/solo_L1_stix-cal-energy_20220926_V03_ecc_in.fits 2026-03-09 13:41:34,569 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220926_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220926_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220926_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220926_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 13:41:41,927 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-09 13:41:41,934 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9ojv0ao3 2026-03-09 13:41:41,960 No soops found for time: 2022-09-26 03:42:00.600302 - 2022-09-26 06:21:04.617104 2026-03-09 13:41:42,056 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/26/CAL/solo_CAL_stix-cal-energy_20220926T034200-20220926T062104_V02.fits 2026-03-09 13:41:42,223 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4xmyb6sx 2026-03-09 13:41:42,223 Read config from in: /tmp/ecc_context_ecc_cfg_1_4xmyb6sx/post_ecc.ini 2026-03-09 13:41:43,467 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4xmyb6sx/solo_L1_stix-cal-energy_20220919_V03_ecc_in.fits 2026-03-09 13:50:26,265 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220919_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220919_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220919_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220919_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 13:50:32,591 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 13:50:32,598 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4xmyb6sx 2026-03-09 13:50:32,631 No soops found for time: 2022-09-19 03:33:51.536504 - 2022-09-19 05:57:50.551719 2026-03-09 13:50:32,731 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/19/CAL/solo_CAL_stix-cal-energy_20220919T033351-20220919T055750_V02.fits 2026-03-09 13:50:32,909 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uukexxxt 2026-03-09 13:50:32,909 Read config from in: /tmp/ecc_context_ecc_cfg_1_uukexxxt/post_ecc.ini 2026-03-09 13:50:34,152 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uukexxxt/solo_L1_stix-cal-energy_20220922_V03_ecc_in.fits 2026-03-09 13:59:33,559 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220922_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220922_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220922_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220922_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 13:59:39,839 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 13:59:39,846 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uukexxxt 2026-03-09 13:59:39,874 No soops found for time: 2022-09-22 03:34:05.993050 - 2022-09-22 05:58:06.008267 2026-03-09 13:59:39,969 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/22/CAL/solo_CAL_stix-cal-energy_20220922T033405-20220922T055806_V02.fits 2026-03-09 13:59:40,129 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_as2p8gkl 2026-03-09 13:59:40,130 Read config from in: /tmp/ecc_context_ecc_cfg_1_as2p8gkl/post_ecc.ini 2026-03-09 13:59:41,368 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_as2p8gkl/solo_L1_stix-cal-energy_20220928_V03_ecc_in.fits 2026-03-09 14:09:29,182 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220928_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220928_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220928_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220928_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 14:09:37,486 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-09 14:09:37,493 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_as2p8gkl 2026-03-09 14:09:37,521 No soops found for time: 2022-09-28 14:15:49.973431 - 2022-09-28 16:55:15.990340 2026-03-09 14:09:37,618 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/28/CAL/solo_CAL_stix-cal-energy_20220928T141549-20220928T165515_V02.fits 2026-03-09 14:09:37,797 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fohr4ow1 2026-03-09 14:09:37,797 Read config from in: /tmp/ecc_context_ecc_cfg_1_fohr4ow1/post_ecc.ini 2026-03-09 14:09:39,069 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fohr4ow1/solo_L1_stix-cal-energy_20220909_V03_ecc_in.fits 2026-03-09 14:18:24,112 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220909_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220909_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220909_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220909_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 14:18:30,358 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 14:18:30,365 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fohr4ow1 2026-03-09 14:18:30,394 No soops found for time: 2022-09-09 04:44:04.032311 - 2022-09-09 07:08:18.047370 2026-03-09 14:18:30,491 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/09/CAL/solo_CAL_stix-cal-energy_20220909T044404-20220909T070818_V02.fits 2026-03-09 14:18:30,650 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o2up1adn 2026-03-09 14:18:30,651 Read config from in: /tmp/ecc_context_ecc_cfg_1_o2up1adn/post_ecc.ini 2026-03-09 14:18:31,901 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o2up1adn/solo_L1_stix-cal-energy_20220929_V03_ecc_in.fits 2026-03-09 14:28:08,470 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220929_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220929_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220929_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220929_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 14:28:16,419 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 14:28:16,426 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o2up1adn 2026-03-09 14:28:16,454 No soops found for time: 2022-09-29 18:03:54.150343 - 2022-09-29 20:28:22.165665 2026-03-09 14:28:16,554 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/29/CAL/solo_CAL_stix-cal-energy_20220929T180354-20220929T202822_V02.fits 2026-03-09 14:28:16,719 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k3iyxcid 2026-03-09 14:28:16,719 Read config from in: /tmp/ecc_context_ecc_cfg_1_k3iyxcid/post_ecc.ini 2026-03-09 14:28:17,967 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k3iyxcid/solo_L1_stix-cal-energy_20220902_V03_ecc_in.fits 2026-03-09 14:37:13,220 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220902_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220902_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220902_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220902_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 14:37:19,455 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 14:37:19,462 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k3iyxcid 2026-03-09 14:37:19,490 No soops found for time: 2022-09-02 09:06:20.008053 - 2022-09-02 11:30:20.023120 2026-03-09 14:37:19,587 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/02/CAL/solo_CAL_stix-cal-energy_20220902T090620-20220902T113020_V02.fits 2026-03-09 14:37:19,750 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_44s128b9 2026-03-09 14:37:19,751 Read config from in: /tmp/ecc_context_ecc_cfg_1_44s128b9/post_ecc.ini 2026-03-09 14:37:20,991 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_44s128b9/solo_L1_stix-cal-energy_20220913_V03_ecc_in.fits 2026-03-09 14:46:11,435 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220913_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220913_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220913_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220913_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 14:46:18,044 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 14:46:18,051 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_44s128b9 2026-03-09 14:46:18,078 No soops found for time: 2022-09-13 04:46:05.633917 - 2022-09-13 07:10:05.648952 2026-03-09 14:46:18,173 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/13/CAL/solo_CAL_stix-cal-energy_20220913T044605-20220913T071005_V02.fits 2026-03-09 14:46:18,336 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_62q31mla 2026-03-09 14:46:18,336 Read config from in: /tmp/ecc_context_ecc_cfg_1_62q31mla/post_ecc.ini 2026-03-09 14:46:19,586 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_62q31mla/solo_L1_stix-cal-energy_20220915_V03_ecc_in.fits 2026-03-09 14:55:18,346 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220915_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220915_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220915_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220915_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 14:55:24,638 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 14:55:24,645 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_62q31mla 2026-03-09 14:55:24,673 No soops found for time: 2022-09-15 05:31:17.941344 - 2022-09-15 08:08:21.957787 2026-03-09 14:55:24,769 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/15/CAL/solo_CAL_stix-cal-energy_20220915T053117-20220915T080821_V02.fits 2026-03-09 14:55:24,929 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wha1vxne 2026-03-09 14:55:24,930 Read config from in: /tmp/ecc_context_ecc_cfg_1_wha1vxne/post_ecc.ini 2026-03-09 14:55:26,172 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wha1vxne/solo_L1_stix-cal-energy_20220904_V03_ecc_in.fits 2026-03-09 15:04:23,335 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220904_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220904_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220904_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220904_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 15:04:29,649 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 15:04:29,657 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wha1vxne 2026-03-09 15:04:29,694 No soops found for time: 2022-09-04 04:36:01.279728 - 2022-09-04 07:00:01.294763 2026-03-09 15:04:29,800 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/09/04/CAL/solo_CAL_stix-cal-energy_20220904T043601-20220904T070001_V02.fits 2026-03-09 15:04:29,960 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bsg9mbfl 2026-03-09 15:04:29,961 Read config from in: /tmp/ecc_context_ecc_cfg_1_bsg9mbfl/post_ecc.ini 2026-03-09 15:04:31,208 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bsg9mbfl/solo_L1_stix-cal-energy_20220210_V03_ecc_in.fits 2026-03-09 15:13:32,617 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220210_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220210_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 15:13:39,703 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 15:13:39,713 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bsg9mbfl 2026-03-09 15:13:39,746 No soops found for time: 2022-02-10 05:06:15.592765 - 2022-02-10 07:30:14.607637 2026-03-09 15:13:39,857 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/10/CAL/solo_CAL_stix-cal-energy_20220210T050615-20220210T073014_V02.fits 2026-03-09 15:13:40,028 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w40ifypo 2026-03-09 15:13:40,028 Read config from in: /tmp/ecc_context_ecc_cfg_1_w40ifypo/post_ecc.ini 2026-03-09 15:13:42,775 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w40ifypo/solo_L1_stix-cal-energy_20220201_V03_ecc_in.fits 2026-03-09 15:22:44,645 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220201_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220201_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 15:22:50,847 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 15:22:50,854 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w40ifypo 2026-03-09 15:22:50,879 Soop found: SOOP 2026-03-09 15:22:50,975 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/01/CAL/solo_CAL_stix-cal-energy_20220201T045606-20220201T072005_V02.fits 2026-03-09 15:22:51,137 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3fakbo4p 2026-03-09 15:22:51,138 Read config from in: /tmp/ecc_context_ecc_cfg_1_3fakbo4p/post_ecc.ini 2026-03-09 15:22:52,385 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3fakbo4p/solo_L1_stix-cal-energy_20220224_V03_ecc_in.fits 2026-03-09 15:32:04,470 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220224_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220224_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 15:32:10,771 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 15:32:10,782 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3fakbo4p 2026-03-09 15:32:10,815 No soops found for time: 2022-02-24 05:32:59.674561 - 2022-02-24 07:56:58.689519 2026-03-09 15:32:10,916 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/24/CAL/solo_CAL_stix-cal-energy_20220224T053259-20220224T075658_V02.fits 2026-03-09 15:32:11,080 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r85v0f3c 2026-03-09 15:32:11,080 Read config from in: /tmp/ecc_context_ecc_cfg_1_r85v0f3c/post_ecc.ini 2026-03-09 15:32:12,326 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r85v0f3c/solo_L1_stix-cal-energy_20220208_V03_ecc_in.fits 2026-03-09 15:41:12,772 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220208_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220208_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 15:41:19,183 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 15:41:19,192 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r85v0f3c 2026-03-09 15:41:19,221 No soops found for time: 2022-02-08 05:06:06.295288 - 2022-02-08 07:30:05.310159 2026-03-09 15:41:19,318 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/08/CAL/solo_CAL_stix-cal-energy_20220208T050606-20220208T073005_V02.fits 2026-03-09 15:41:19,480 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lhf861y8 2026-03-09 15:41:19,481 Read config from in: /tmp/ecc_context_ecc_cfg_1_lhf861y8/post_ecc.ini 2026-03-09 15:41:20,734 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lhf861y8/solo_L1_stix-cal-energy_20220205_V03_ecc_in.fits 2026-03-09 15:50:23,600 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 15:50:30,008 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 15:50:30,015 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lhf861y8 2026-03-09 15:50:30,045 No soops found for time: 2022-02-05 04:56:24.847882 - 2022-02-05 07:20:24.862694 2026-03-09 15:50:30,142 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/05/CAL/solo_CAL_stix-cal-energy_20220205T045624-20220205T072024_V02.fits 2026-03-09 15:50:30,307 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0c4rb4ei 2026-03-09 15:50:30,308 Read config from in: /tmp/ecc_context_ecc_cfg_1_0c4rb4ei/post_ecc.ini 2026-03-09 15:50:31,559 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0c4rb4ei/solo_L1_stix-cal-energy_20220214_V03_ecc_in.fits 2026-03-09 15:59:27,022 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220214_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220214_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 15:59:33,390 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 15:59:33,397 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0c4rb4ei 2026-03-09 15:59:33,426 No soops found for time: 2022-02-14 05:16:01.188697 - 2022-02-14 07:40:00.203568 2026-03-09 15:59:33,523 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/14/CAL/solo_CAL_stix-cal-energy_20220214T051601-20220214T074000_V02.fits 2026-03-09 15:59:33,685 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d_592u9i 2026-03-09 15:59:33,685 Read config from in: /tmp/ecc_context_ecc_cfg_1_d_592u9i/post_ecc.ini 2026-03-09 15:59:34,950 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d_592u9i/solo_L1_stix-cal-energy_20220207_V03_ecc_in.fits 2026-03-09 16:08:34,778 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220207_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220207_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 16:08:42,653 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 16:08:42,660 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d_592u9i 2026-03-09 16:08:42,688 No soops found for time: 2022-02-07 05:06:01.146548 - 2022-02-07 07:30:00.161420 2026-03-09 16:08:42,783 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/07/CAL/solo_CAL_stix-cal-energy_20220207T050601-20220207T073000_V02.fits 2026-03-09 16:08:42,955 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fo0vp75k 2026-03-09 16:08:42,955 Read config from in: /tmp/ecc_context_ecc_cfg_1_fo0vp75k/post_ecc.ini 2026-03-09 16:08:44,276 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fo0vp75k/solo_L1_stix-cal-energy_20220220_V03_ecc_in.fits 2026-03-09 16:17:34,847 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 16:17:41,077 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 16:17:41,084 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fo0vp75k 2026-03-09 16:17:41,111 No soops found for time: 2022-02-20 05:16:29.076653 - 2022-02-20 07:40:29.091514 2026-03-09 16:17:41,206 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/20/CAL/solo_CAL_stix-cal-energy_20220220T051629-20220220T074029_V02.fits 2026-03-09 16:17:41,366 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g183b7js 2026-03-09 16:17:41,366 Read config from in: /tmp/ecc_context_ecc_cfg_1_g183b7js/post_ecc.ini 2026-03-09 16:17:42,616 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g183b7js/solo_L1_stix-cal-energy_20220206_V03_ecc_in.fits 2026-03-09 16:26:49,987 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 16:26:56,276 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 16:26:56,283 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g183b7js 2026-03-09 16:26:56,310 No soops found for time: 2022-02-06 04:56:31.996020 - 2022-02-06 07:20:32.010833 2026-03-09 16:26:56,405 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/06/CAL/solo_CAL_stix-cal-energy_20220206T045631-20220206T072032_V02.fits 2026-03-09 16:26:56,565 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2j75edan 2026-03-09 16:26:56,566 Read config from in: /tmp/ecc_context_ecc_cfg_1_2j75edan/post_ecc.ini 2026-03-09 16:26:57,808 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2j75edan/solo_L1_stix-cal-energy_20220203_V03_ecc_in.fits 2026-03-09 16:36:07,515 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220203_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220203_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 16:36:13,736 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 16:36:13,743 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2j75edan 2026-03-09 16:36:13,771 No soops found for time: 2022-02-03 04:56:15.551613 - 2022-02-03 07:20:14.566424 2026-03-09 16:36:13,865 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/03/CAL/solo_CAL_stix-cal-energy_20220203T045615-20220203T072014_V02.fits 2026-03-09 16:36:14,023 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_otavjx7x 2026-03-09 16:36:14,023 Read config from in: /tmp/ecc_context_ecc_cfg_1_otavjx7x/post_ecc.ini 2026-03-09 16:36:15,269 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_otavjx7x/solo_L1_stix-cal-energy_20220217_V03_ecc_in.fits 2026-03-09 16:45:10,279 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220217_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220217_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 16:45:16,624 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 16:45:16,631 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_otavjx7x 2026-03-09 16:45:16,659 No soops found for time: 2022-02-17 05:16:15.631600 - 2022-02-17 07:40:14.646334 2026-03-09 16:45:16,753 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/17/CAL/solo_CAL_stix-cal-energy_20220217T051615-20220217T074014_V02.fits 2026-03-09 16:45:16,920 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_aq0yqx_6 2026-03-09 16:45:16,920 Read config from in: /tmp/ecc_context_ecc_cfg_1_aq0yqx_6/post_ecc.ini 2026-03-09 16:45:18,211 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_aq0yqx_6/solo_L1_stix-cal-energy_20220218_V03_ecc_in.fits 2026-03-09 16:54:20,342 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220218_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220218_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 16:54:26,716 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 16:54:26,724 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_aq0yqx_6 2026-03-09 16:54:26,753 No soops found for time: 2022-02-18 05:16:19.778955 - 2022-02-18 07:40:19.793690 2026-03-09 16:54:26,847 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/18/CAL/solo_CAL_stix-cal-energy_20220218T051619-20220218T074019_V02.fits 2026-03-09 16:54:27,016 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9kokaehm 2026-03-09 16:54:27,017 Read config from in: /tmp/ecc_context_ecc_cfg_1_9kokaehm/post_ecc.ini 2026-03-09 16:54:28,275 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9kokaehm/solo_L1_stix-cal-energy_20220223_V03_ecc_in.fits 2026-03-09 17:03:27,754 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220223_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220223_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 17:03:35,504 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 17:03:35,511 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9kokaehm 2026-03-09 17:03:35,537 No soops found for time: 2022-02-23 05:32:54.524178 - 2022-02-23 07:56:53.539038 2026-03-09 17:03:35,631 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/23/CAL/solo_CAL_stix-cal-energy_20220223T053254-20220223T075653_V02.fits 2026-03-09 17:03:35,791 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xh457t4w 2026-03-09 17:03:35,792 Read config from in: /tmp/ecc_context_ecc_cfg_1_xh457t4w/post_ecc.ini 2026-03-09 17:03:37,027 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xh457t4w/solo_L1_stix-cal-energy_20220216_V03_ecc_in.fits 2026-03-09 17:12:37,580 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220216_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220216_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 17:12:43,830 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 17:12:43,837 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xh457t4w 2026-03-09 17:12:43,868 No soops found for time: 2022-02-16 05:16:10.484244 - 2022-02-16 07:40:09.498977 2026-03-09 17:12:43,963 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/16/CAL/solo_CAL_stix-cal-energy_20220216T051610-20220216T074009_V02.fits 2026-03-09 17:12:44,128 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xb381v18 2026-03-09 17:12:44,129 Read config from in: /tmp/ecc_context_ecc_cfg_1_xb381v18/post_ecc.ini 2026-03-09 17:12:45,377 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xb381v18/solo_L1_stix-cal-energy_20220221_V03_ecc_in.fits 2026-03-09 17:21:52,303 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220221_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220221_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 17:21:58,531 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 17:21:58,538 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xb381v18 2026-03-09 17:21:58,566 No soops found for time: 2022-02-21 05:26:01.226247 - 2022-02-21 07:50:05.241115 2026-03-09 17:21:58,666 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/21/CAL/solo_CAL_stix-cal-energy_20220221T052601-20220221T075005_V02.fits 2026-03-09 17:21:58,830 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7ol2zz6d 2026-03-09 17:21:58,830 Read config from in: /tmp/ecc_context_ecc_cfg_1_7ol2zz6d/post_ecc.ini 2026-03-09 17:22:00,070 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7ol2zz6d/solo_L1_stix-cal-energy_20220212_V03_ecc_in.fits 2026-03-09 17:30:56,378 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220212_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220212_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 17:31:03,257 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 17:31:03,266 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7ol2zz6d 2026-03-09 17:31:03,299 No soops found for time: 2022-02-12 05:06:23.890241 - 2022-02-12 07:30:23.905114 2026-03-09 17:31:03,404 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/12/CAL/solo_CAL_stix-cal-energy_20220212T050623-20220212T073023_V02.fits 2026-03-09 17:31:03,575 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_67frpx4v 2026-03-09 17:31:03,576 Read config from in: /tmp/ecc_context_ecc_cfg_1_67frpx4v/post_ecc.ini 2026-03-09 17:31:04,849 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_67frpx4v/solo_L1_stix-cal-energy_20220227_V03_ecc_in.fits 2026-03-09 17:40:12,329 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220227_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220227_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 17:40:18,758 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 17:40:18,765 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_67frpx4v 2026-03-09 17:40:18,793 No soops found for time: 2022-02-27 05:33:16.123382 - 2022-02-27 07:57:16.138342 2026-03-09 17:40:18,889 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/27/CAL/solo_CAL_stix-cal-energy_20220227T053316-20220227T075716_V02.fits 2026-03-09 17:40:19,050 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_50ib9emt 2026-03-09 17:40:19,051 Read config from in: /tmp/ecc_context_ecc_cfg_1_50ib9emt/post_ecc.ini 2026-03-09 17:40:20,300 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_50ib9emt/solo_L1_stix-cal-energy_20220211_V03_ecc_in.fits 2026-03-09 17:49:23,834 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220211_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220211_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 17:49:30,117 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 17:49:30,124 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_50ib9emt 2026-03-09 17:49:30,152 No soops found for time: 2022-02-11 05:06:19.741503 - 2022-02-11 07:30:19.756377 2026-03-09 17:49:30,247 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/11/CAL/solo_CAL_stix-cal-energy_20220211T050619-20220211T073019_V02.fits 2026-03-09 17:49:30,404 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ou0pn8qm 2026-03-09 17:49:30,404 Read config from in: /tmp/ecc_context_ecc_cfg_1_ou0pn8qm/post_ecc.ini 2026-03-09 17:49:33,162 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ou0pn8qm/solo_L1_stix-cal-energy_20220226_V03_ecc_in.fits 2026-03-09 17:58:35,875 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220226_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220226_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 17:58:42,217 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 17:58:42,225 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ou0pn8qm 2026-03-09 17:58:42,254 Soop found: SOOP 2026-03-09 17:58:42,352 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/26/CAL/solo_CAL_stix-cal-energy_20220226T053311-20220226T075710_V02.fits 2026-03-09 17:58:42,517 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_56518f42 2026-03-09 17:58:42,518 Read config from in: /tmp/ecc_context_ecc_cfg_1_56518f42/post_ecc.ini 2026-03-09 17:58:43,761 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_56518f42/solo_L1_stix-cal-energy_20220219_V03_ecc_in.fits 2026-03-09 18:11:14,673 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220219_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220219_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 18:11:20,853 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 18:11:20,860 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_56518f42 2026-03-09 18:11:20,888 No soops found for time: 2022-02-19 05:16:23.926310 - 2022-02-19 07:40:23.941045 2026-03-09 18:11:20,993 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/19/CAL/solo_CAL_stix-cal-energy_20220219T051623-20220219T074023_V02.fits 2026-03-09 18:11:21,157 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pv6dvnqq 2026-03-09 18:11:21,157 Read config from in: /tmp/ecc_context_ecc_cfg_1_pv6dvnqq/post_ecc.ini 2026-03-09 18:11:22,422 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pv6dvnqq/solo_L1_stix-cal-energy_20220222_V03_ecc_in.fits 2026-03-09 18:23:54,021 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220222_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220222_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 18:24:00,180 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 18:24:00,187 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pv6dvnqq 2026-03-09 18:24:00,214 No soops found for time: 2022-02-22 05:32:49.375559 - 2022-02-22 07:56:49.390420 2026-03-09 18:24:00,313 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/22/CAL/solo_CAL_stix-cal-energy_20220222T053249-20220222T075649_V02.fits 2026-03-09 18:24:00,472 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s2a3g3cg 2026-03-09 18:24:00,472 Read config from in: /tmp/ecc_context_ecc_cfg_1_s2a3g3cg/post_ecc.ini 2026-03-09 18:24:01,716 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s2a3g3cg/solo_L1_stix-cal-energy_20220225_V03_ecc_in.fits 2026-03-09 18:35:37,714 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220225_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220225_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 18:35:43,908 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 18:35:43,917 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s2a3g3cg 2026-03-09 18:35:43,945 No soops found for time: 2022-02-25 05:33:06.824171 - 2022-02-25 07:57:05.839129 2026-03-09 18:35:44,042 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/25/CAL/solo_CAL_stix-cal-energy_20220225T053306-20220225T075705_V02.fits 2026-03-09 18:35:44,202 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_epx91z_f 2026-03-09 18:35:44,202 Read config from in: /tmp/ecc_context_ecc_cfg_1_epx91z_f/post_ecc.ini 2026-03-09 18:35:45,449 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_epx91z_f/solo_L1_stix-cal-energy_20220228_V03_ecc_in.fits 2026-03-09 18:49:05,269 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220228_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220228_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 18:49:11,537 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 18:49:11,547 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_epx91z_f 2026-03-09 18:49:11,579 No soops found for time: 2022-02-28 05:33:21.272989 - 2022-02-28 07:57:21.287949 2026-03-09 18:49:11,680 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/28/CAL/solo_CAL_stix-cal-energy_20220228T053321-20220228T075721_V02.fits 2026-03-09 18:49:11,842 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pqy_h68t 2026-03-09 18:49:11,843 Read config from in: /tmp/ecc_context_ecc_cfg_1_pqy_h68t/post_ecc.ini 2026-03-09 18:49:13,089 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pqy_h68t/solo_L1_stix-cal-energy_20220209_V03_ecc_in.fits 2026-03-09 19:02:23,506 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 19:02:31,167 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 19:02:31,173 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pqy_h68t 2026-03-09 19:02:31,197 No soops found for time: 2022-02-09 05:06:10.444026 - 2022-02-09 07:30:10.458899 2026-03-09 19:02:31,295 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/09/CAL/solo_CAL_stix-cal-energy_20220209T050610-20220209T073010_V02.fits 2026-03-09 19:02:31,449 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xdcwbj8m 2026-03-09 19:02:31,449 Read config from in: /tmp/ecc_context_ecc_cfg_1_xdcwbj8m/post_ecc.ini 2026-03-09 19:02:32,679 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xdcwbj8m/solo_L1_stix-cal-energy_20220202_V03_ecc_in.fits 2026-03-09 19:16:20,594 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220202_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220202_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 19:16:26,732 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 19:16:26,738 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xdcwbj8m 2026-03-09 19:16:26,763 Soop found: SOOP 2026-03-09 19:16:26,861 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/02/CAL/solo_CAL_stix-cal-energy_20220202T045610-20220202T072010_V02.fits 2026-03-09 19:16:27,018 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wd2lel_m 2026-03-09 19:16:27,019 Read config from in: /tmp/ecc_context_ecc_cfg_1_wd2lel_m/post_ecc.ini 2026-03-09 19:16:28,258 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wd2lel_m/solo_L1_stix-cal-energy_20220213_V03_ecc_in.fits 2026-03-09 19:29:27,248 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220213_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220213_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 19:29:33,423 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 19:29:33,430 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wd2lel_m 2026-03-09 19:29:33,456 No soops found for time: 2022-02-13 05:06:28.038979 - 2022-02-13 07:30:28.053852 2026-03-09 19:29:33,555 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/13/CAL/solo_CAL_stix-cal-energy_20220213T050628-20220213T073028_V02.fits 2026-03-09 19:29:33,718 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6e1aptbu 2026-03-09 19:29:33,719 Read config from in: /tmp/ecc_context_ecc_cfg_1_6e1aptbu/post_ecc.ini 2026-03-09 19:29:34,965 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6e1aptbu/solo_L1_stix-cal-energy_20220215_V03_ecc_in.fits 2026-03-09 19:42:08,330 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220215_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220215_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 19:42:14,858 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 19:42:14,866 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6e1aptbu 2026-03-09 19:42:14,895 No soops found for time: 2022-02-15 05:16:05.337435 - 2022-02-15 07:40:05.352308 2026-03-09 19:42:14,999 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/15/CAL/solo_CAL_stix-cal-energy_20220215T051605-20220215T074005_V02.fits 2026-03-09 19:42:15,180 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2g5vk7mg 2026-03-09 19:42:15,181 Read config from in: /tmp/ecc_context_ecc_cfg_1_2g5vk7mg/post_ecc.ini 2026-03-09 19:42:16,461 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2g5vk7mg/solo_L1_stix-cal-energy_20220204_V03_ecc_in.fits 2026-03-09 19:54:40,693 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220204_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220204_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 19:54:47,509 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 19:54:47,519 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2g5vk7mg 2026-03-09 19:54:47,550 No soops found for time: 2022-02-04 04:56:19.699746 - 2022-02-04 07:20:19.714559 2026-03-09 19:54:47,653 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/02/04/CAL/solo_CAL_stix-cal-energy_20220204T045619-20220204T072019_V02.fits 2026-03-09 19:54:47,823 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1aeqetiw 2026-03-09 19:54:47,824 Read config from in: /tmp/ecc_context_ecc_cfg_1_1aeqetiw/post_ecc.ini 2026-03-09 19:54:49,211 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1aeqetiw/solo_L1_stix-cal-energy_20220430_V03_ecc_in.fits 2026-03-09 20:07:27,141 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220430_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220430_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220430_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220430_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 20:07:33,511 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 20:07:33,519 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1aeqetiw 2026-03-09 20:07:33,551 No soops found for time: 2022-04-30 12:49:27.494035 - 2022-04-30 15:13:27.510407 2026-03-09 20:07:33,658 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/30/CAL/solo_CAL_stix-cal-energy_20220430T124927-20220430T151327_V02.fits 2026-03-09 20:07:33,827 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kqe1a__w 2026-03-09 20:07:33,828 Read config from in: /tmp/ecc_context_ecc_cfg_1_kqe1a__w/post_ecc.ini 2026-03-09 20:07:35,108 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kqe1a__w/solo_L1_stix-cal-energy_20220401_V03_ecc_in.fits 2026-03-09 20:20:07,925 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220401_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220401_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220401_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220401_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 20:20:15,900 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 20:20:15,907 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kqe1a__w 2026-03-09 20:20:15,932 Soop found: SOOP 2026-03-09 20:20:16,029 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/01/CAL/solo_CAL_stix-cal-energy_20220401T063116-20220401T090019_V02.fits 2026-03-09 20:20:16,192 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_43hnw_nt 2026-03-09 20:20:16,193 Read config from in: /tmp/ecc_context_ecc_cfg_1_43hnw_nt/post_ecc.ini 2026-03-09 20:20:17,457 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_43hnw_nt/solo_L1_stix-cal-energy_20220408_V03_ecc_in.fits 2026-03-09 20:32:57,251 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220408_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220408_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220408_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220408_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 20:33:03,628 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 20:33:03,635 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_43hnw_nt 2026-03-09 20:33:03,663 No soops found for time: 2022-04-08 06:41:10.193172 - 2022-04-08 09:07:33.208472 2026-03-09 20:33:03,770 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/08/CAL/solo_CAL_stix-cal-energy_20220408T064110-20220408T090733_V02.fits 2026-03-09 20:33:03,936 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_582fueo0 2026-03-09 20:33:03,936 Read config from in: /tmp/ecc_context_ecc_cfg_1_582fueo0/post_ecc.ini 2026-03-09 20:33:05,207 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_582fueo0/solo_L1_stix-cal-energy_20220414_V03_ecc_in.fits 2026-03-09 20:47:12,593 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220414_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220414_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220414_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220414_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 20:47:19,811 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 20:47:19,820 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_582fueo0 2026-03-09 20:47:19,852 No soops found for time: 2022-04-14 06:51:23.097290 - 2022-04-14 09:16:20.112440 2026-03-09 20:47:19,959 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/14/CAL/solo_CAL_stix-cal-energy_20220414T065123-20220414T091620_V02.fits 2026-03-09 20:47:20,131 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n712gne2 2026-03-09 20:47:20,132 Read config from in: /tmp/ecc_context_ecc_cfg_1_n712gne2/post_ecc.ini 2026-03-09 20:47:21,426 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n712gne2/solo_L1_stix-cal-energy_20220407_V03_ecc_in.fits 2026-03-09 21:00:42,602 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220407_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220407_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220407_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220407_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 21:00:48,775 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 21:00:48,782 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n712gne2 2026-03-09 21:00:48,809 No soops found for time: 2022-04-07 06:41:06.042656 - 2022-04-07 09:05:05.057705 2026-03-09 21:00:48,909 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/07/CAL/solo_CAL_stix-cal-energy_20220407T064106-20220407T090505_V02.fits 2026-03-09 21:00:49,074 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d4debcwg 2026-03-09 21:00:49,075 Read config from in: /tmp/ecc_context_ecc_cfg_1_d4debcwg/post_ecc.ini 2026-03-09 21:00:50,335 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d4debcwg/solo_L1_stix-cal-energy_20220406_V03_ecc_in.fits 2026-03-09 21:09:54,293 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220406_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220406_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 21:10:00,533 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 21:10:00,540 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d4debcwg 2026-03-09 21:10:00,567 No soops found for time: 2022-04-06 06:41:00.892138 - 2022-04-06 09:04:59.907188 2026-03-09 21:10:00,669 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/06/CAL/solo_CAL_stix-cal-energy_20220406T064100-20220406T090459_V02.fits 2026-03-09 21:10:00,830 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8bjqvuej 2026-03-09 21:10:00,831 Read config from in: /tmp/ecc_context_ecc_cfg_1_8bjqvuej/post_ecc.ini 2026-03-09 21:10:02,089 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8bjqvuej/solo_L1_stix-cal-energy_20220403_V03_ecc_in.fits 2026-03-09 21:18:56,208 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220403_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220403_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220403_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220403_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 21:19:02,484 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 21:19:02,491 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8bjqvuej 2026-03-09 21:19:02,517 Soop found: SOOP 2026-03-09 21:19:02,618 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/03/CAL/solo_CAL_stix-cal-energy_20220403T081003-20220403T103403_V02.fits 2026-03-09 21:19:02,786 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gomvbzmt 2026-03-09 21:19:02,787 Read config from in: /tmp/ecc_context_ecc_cfg_1_gomvbzmt/post_ecc.ini 2026-03-09 21:19:05,485 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gomvbzmt/solo_L1_stix-cal-energy_20220418_V03_ecc_in.fits 2026-03-09 21:27:57,053 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220418_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220418_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220418_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220418_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 21:28:03,388 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 21:28:03,397 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gomvbzmt 2026-03-09 21:28:03,424 No soops found for time: 2022-04-18 07:01:00.700330 - 2022-04-18 09:37:07.716648 2026-03-09 21:28:03,526 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/18/CAL/solo_CAL_stix-cal-energy_20220418T070100-20220418T093707_V02.fits 2026-03-09 21:28:03,688 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iwhcftbb 2026-03-09 21:28:03,688 Read config from in: /tmp/ecc_context_ecc_cfg_1_iwhcftbb/post_ecc.ini 2026-03-09 21:28:04,932 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iwhcftbb/solo_L1_stix-cal-energy_20220416_V03_ecc_in.fits 2026-03-09 21:37:10,246 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220416_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220416_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220416_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220416_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 21:37:16,427 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 21:37:16,435 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_iwhcftbb 2026-03-09 21:37:16,462 No soops found for time: 2022-04-16 07:32:05.402562 - 2022-04-16 09:56:05.417613 2026-03-09 21:37:16,560 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/16/CAL/solo_CAL_stix-cal-energy_20220416T073205-20220416T095605_V02.fits 2026-03-09 21:37:16,721 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lj9xuglh 2026-03-09 21:37:16,722 Read config from in: /tmp/ecc_context_ecc_cfg_1_lj9xuglh/post_ecc.ini 2026-03-09 21:37:17,971 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lj9xuglh/solo_L1_stix-cal-energy_20220412_V03_ecc_in.fits 2026-03-09 21:46:49,004 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220412_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220412_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220412_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220412_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 21:46:55,385 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 21:46:55,392 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lj9xuglh 2026-03-09 21:46:55,418 No soops found for time: 2022-04-12 06:51:05.796243 - 2022-04-12 09:15:05.811294 2026-03-09 21:46:55,520 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/12/CAL/solo_CAL_stix-cal-energy_20220412T065105-20220412T091505_V02.fits 2026-03-09 21:46:55,678 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uv7juy8g 2026-03-09 21:46:55,679 Read config from in: /tmp/ecc_context_ecc_cfg_1_uv7juy8g/post_ecc.ini 2026-03-09 21:46:56,935 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uv7juy8g/solo_L1_stix-cal-energy_20220411_V03_ecc_in.fits 2026-03-09 21:55:49,604 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220411_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220411_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220411_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220411_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 21:55:56,700 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 21:55:56,708 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uv7juy8g 2026-03-09 21:55:56,738 No soops found for time: 2022-04-11 06:51:00.645726 - 2022-04-11 09:15:00.660777 2026-03-09 21:55:56,845 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/11/CAL/solo_CAL_stix-cal-energy_20220411T065100-20220411T091500_V02.fits 2026-03-09 21:55:57,012 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1l5aorco 2026-03-09 21:55:57,013 Read config from in: /tmp/ecc_context_ecc_cfg_1_1l5aorco/post_ecc.ini 2026-03-09 21:55:58,291 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1l5aorco/solo_L1_stix-cal-energy_20220409_V03_ecc_in.fits 2026-03-09 22:04:43,417 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220409_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220409_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220409_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220409_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 22:04:49,688 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 22:04:49,695 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1l5aorco 2026-03-09 22:04:49,723 No soops found for time: 2022-04-09 07:27:41.348542 - 2022-04-09 09:51:40.363592 2026-03-09 22:04:49,820 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/09/CAL/solo_CAL_stix-cal-energy_20220409T072741-20220409T095140_V02.fits 2026-03-09 22:04:49,983 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p3ba3ez5 2026-03-09 22:04:49,984 Read config from in: /tmp/ecc_context_ecc_cfg_1_p3ba3ez5/post_ecc.ini 2026-03-09 22:04:51,238 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p3ba3ez5/solo_L1_stix-cal-energy_20220429_V03_ecc_in.fits 2026-03-09 22:13:41,087 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220429_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220429_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220429_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220429_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 22:13:47,340 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 22:13:47,347 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p3ba3ez5 2026-03-09 22:13:47,374 No soops found for time: 2022-04-29 12:49:20.346331 - 2022-04-29 15:13:20.361100 2026-03-09 22:13:47,471 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/29/CAL/solo_CAL_stix-cal-energy_20220429T124920-20220429T151320_V02.fits 2026-03-09 22:13:47,635 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fky8_g9f 2026-03-09 22:13:47,635 Read config from in: /tmp/ecc_context_ecc_cfg_1_fky8_g9f/post_ecc.ini 2026-03-09 22:13:50,316 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fky8_g9f/solo_L1_stix-cal-energy_20220402_V03_ecc_in.fits 2026-03-09 22:22:42,308 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220402_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220402_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220402_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220402_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 22:22:48,552 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 22:22:48,560 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fky8_g9f 2026-03-09 22:22:48,585 Soop found: SOOP 2026-03-09 22:22:48,686 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/02/CAL/solo_CAL_stix-cal-energy_20220402T080958-20220402T103358_V02.fits 2026-03-09 22:22:48,846 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uchd9lnu 2026-03-09 22:22:48,847 Read config from in: /tmp/ecc_context_ecc_cfg_1_uchd9lnu/post_ecc.ini 2026-03-09 22:22:50,095 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uchd9lnu/solo_L1_stix-cal-energy_20220413_V03_ecc_in.fits 2026-03-09 22:32:30,190 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220413_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220413_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220413_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220413_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 22:32:36,464 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-09 22:32:36,471 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uchd9lnu 2026-03-09 22:32:36,497 No soops found for time: 2022-04-13 06:51:10.946761 - 2022-04-13 09:15:10.961812 2026-03-09 22:32:36,593 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/13/CAL/solo_CAL_stix-cal-energy_20220413T065110-20220413T091510_V02.fits 2026-03-09 22:32:36,759 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2d4ahz45 2026-03-09 22:32:36,759 Read config from in: /tmp/ecc_context_ecc_cfg_1_2d4ahz45/post_ecc.ini 2026-03-09 22:32:37,997 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2d4ahz45/solo_L1_stix-cal-energy_20220415_V03_ecc_in.fits 2026-03-09 22:42:02,974 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220415_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220415_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220415_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220415_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 22:42:09,202 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 22:42:09,209 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2d4ahz45 2026-03-09 22:42:09,237 No soops found for time: 2022-04-15 07:32:00.252044 - 2022-04-15 09:56:00.267095 2026-03-09 22:42:09,333 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/15/CAL/solo_CAL_stix-cal-energy_20220415T073200-20220415T095600_V02.fits 2026-03-09 22:42:09,491 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8zxh5sym 2026-03-09 22:42:09,492 Read config from in: /tmp/ecc_context_ecc_cfg_1_8zxh5sym/post_ecc.ini 2026-03-09 22:42:10,747 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8zxh5sym/solo_L1_stix-cal-energy_20220404_V03_ecc_in.fits 2026-03-09 22:51:05,614 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20220404_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20220404_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20220404_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20220404_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-09 22:51:11,892 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-09 22:51:11,899 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8zxh5sym 2026-03-09 22:51:11,924 Soop found: SOOP 2026-03-09 22:51:12,023 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2022/04/04/CAL/solo_CAL_stix-cal-energy_20220404T081008-20220404T103408_V02.fits