2026-03-05 10:54:25,079 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-03-05 10:54:25,986 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260304_001.tm 2026-03-05 10:54:26,245 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260304_001.tm 2026-03-05 10:54:26,245 Create SOCManager @ /data/stix/SOLSOC/from_edds/tm/processing 2026-03-05 10:54:26,253 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-03-05 10:54:26,288 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-05 10:54:26,289 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-03-05 10:54:26,290 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-05 10:54:26,290 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M23_V01.json 2026-03-05 10:54:26,291 newer version (257) found for LTP23_Apr2026-Jun2026: replacing 2026-03-05 10:54:26,291 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-03-05 10:54:26,292 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-03-05 10:54:26,293 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-03-05 10:54:26,294 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-03-05 10:54:26,294 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-03-05 10:54:26,295 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-03-05 10:54:26,295 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-03-05 10:54:26,297 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-03-05 10:54:26,297 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-03-05 10:54:26,298 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-03-05 10:54:26,298 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-03-05 10:54:26,299 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-03-05 10:54:26,300 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-03-05 10:54:26,301 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-03-05 10:54:26,301 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-03-05 10:54:26,302 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-03-05 10:54:26,302 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-03-05 10:54:26,303 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-03-05 10:54:26,303 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-03-05 10:54:26,305 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-03-05 10:54:26,305 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-03-05 10:54:26,306 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-03-05 10:54:26,306 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-03-05 10:54:26,307 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-03-05 10:54:26,307 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-03-05 10:54:26,308 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-03-05 10:54:26,308 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-03-05 10:54:26,309 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-03-05 10:54:26,309 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-03-05 10:54:26,310 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-03-05 10:54:26,310 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-03-05 10:54:26,311 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-03-05 10:54:26,311 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-03-05 10:54:26,312 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-03-05 10:54:26,312 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-03-05 10:54:26,313 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-03-05 10:54:26,314 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-03-05 10:54:26,315 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-03-05 10:54:26,315 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-03-05 10:54:26,316 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-03-05 10:54:26,316 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-03-05 10:54:26,317 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-03-05 10:54:26,317 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-03-05 10:54:26,318 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-03-05 10:54:26,318 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-03-05 10:54:26,319 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-03-05 10:54:26,319 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-03-05 10:54:26,319 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-03-05 10:54:26,320 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-03-05 10:54:26,320 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-03-05 10:54:26,321 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-03-05 10:54:26,321 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-03-05 10:54:26,321 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-03-05 10:54:26,322 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-03-05 10:54:26,322 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-03-05 10:54:26,323 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-03-05 10:54:26,323 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-03-05 10:54:26,324 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-03-05 10:54:26,324 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-03-05 10:54:26,325 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-05 10:54:26,325 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-03-05 10:54:26,326 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-03-05 10:54:26,326 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-03-05 10:54:26,327 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-03-05 10:54:26,327 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-03-05 10:54:26,329 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-03-05 10:54:26,329 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-03-05 10:54:26,330 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-03-05 10:54:26,331 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-03-05 10:54:26,331 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-03-05 10:54:26,331 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-03-05 10:54:26,332 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-03-05 10:54:26,332 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-03-05 10:54:26,332 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-03-05 10:54:26,332 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-03-05 10:54:26,332 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-03-05 10:54:26,333 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-03-05 10:54:26,333 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-05 10:54:26,333 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-03-05 10:54:26,333 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-05 10:54:26,333 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-03-05 10:54:26,333 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-05 10:54:26,334 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-03-05 10:54:26,334 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-05 10:54:26,334 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-03-05 10:54:26,334 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-03-05 10:54:26,616 SOOP Rebuild Index: soops: 562observations 1247 2026-03-05 10:54:42,327 PIPELINE VERSION Version: 1.7.2 Common instrument config version: v0.1.9 PROCESSING VERSIONS Prod: Ephemeris File: /home/stixcore/STIXCore/stixcore/products/ANC/aspect.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/CAL/energy.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/stixcore/STIXCore/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-03-05 10:54:42,328 CONFIG [Paths] tm_archive = /data/stix/SOLSOC/from_edds/tm/processing fits_archive = /data/stix/out/fits_v1.2.0 spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12388 parallel_batchsize_l0 = 100 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = INFO log_dir = /data/stix/out/fits_v1.2.0/logging error_mail_send = True error_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch sync_tm_at_start = True stop_after_unprocessed = True start_with_unprocessed = True last_processed = TM_LTP21_BatchRequest.PktTmRaw.SOL.0.2025.237.08.00.24.563.NHzM@2025.365.16.00.00.336.1.xml.out history_db_file = /home/stixcore/soar_pub/processing_history.sqlite [Publish] db_file = /home/stixcore/soar_pub/published.sqlite include_levels = L0, L1, ANC, LL03 waiting_period = 42d target_dir = /home/stixcore/from_pub099 report_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie report_mail_send = True same_esa_name_dir = /data/stix/out/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/fits_v1.2.0 ll_waiting_period = 0d target_host = pub026.cs.technik.fhnw.ch supplement_report = /home/stixcore/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal,asp log_dir = /data/stix/out/fits_v1.2.0/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-03-05 10:54:42,329 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 36325 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260304_001.tm'), 'pred', datetime.datetime(2026, 3, 4, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260304_001.tm'), 'flown', datetime.datetime(2026, 3, 4, 0, 0))] IDBManager: /home/stixcore/STIXCore/stixcore/data/idb Versions: [{'label': '2.26.36', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/stixcore/STIXCore/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-03-05 10:54:43,489 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260304_001.tm 2026-03-05 10:54:43,746 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260304_001.tm 2026-03-05 10:54:43,747 Loaded 1 ECC configurations from index 2026-03-05 10:54:43,939 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20230710.csv 2026-03-05 10:54:43,978 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zvxo9hmi 2026-03-05 10:54:43,979 Read config from in: /tmp/ecc_context_ecc_cfg_1_zvxo9hmi/post_ecc.ini 2026-03-05 10:54:45,228 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zvxo9hmi/solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits 2026-03-05 11:04:23,425 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:04:29,694 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 11:04:29,702 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zvxo9hmi 2026-03-05 11:04:29,746 No soops found for time: 2023-10-30 02:01:38.556092 - 2023-10-30 04:25:38.571765 2026-03-05 11:04:29,881 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/30/CAL/solo_CAL_stix-cal-energy_20231030T020138-20231030T042538_V02.fits 2026-03-05 11:04:30,056 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bn1c_vrj 2026-03-05 11:04:30,056 Read config from in: /tmp/ecc_context_ecc_cfg_1_bn1c_vrj/post_ecc.ini 2026-03-05 11:04:31,296 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bn1c_vrj/solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits 2026-03-05 11:14:44,335 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:14:50,759 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-05 11:14:50,767 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bn1c_vrj 2026-03-05 11:14:50,796 No soops found for time: 2023-10-10 02:42:52.399467 - 2023-10-10 05:06:52.415510 2026-03-05 11:14:52,608 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/10/CAL/solo_CAL_stix-cal-energy_20231010T024252-20231010T050652_V02.fits 2026-03-05 11:14:52,771 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1z5k8yh1 2026-03-05 11:14:52,771 Read config from in: /tmp/ecc_context_ecc_cfg_1_1z5k8yh1/post_ecc.ini 2026-03-05 11:14:54,004 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1z5k8yh1/solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits 2026-03-05 11:24:40,021 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231001_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 96 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:24:46,265 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 11:24:46,268 ECC result Gain_Cor 0.0 for DET 9 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,269 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,270 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,270 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,270 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 11:24:46,275 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1z5k8yh1 2026-03-05 11:24:46,304 Soop found: SOOP 2026-03-05 11:24:46,407 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/01/CAL/solo_CAL_stix-cal-energy_20231001T011137-20231001T033920_V02.fits 2026-03-05 11:24:46,854 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_721z271w 2026-03-05 11:24:46,855 Read config from in: /tmp/ecc_context_ecc_cfg_1_721z271w/post_ecc.ini 2026-03-05 11:24:48,126 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_721z271w/solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits 2026-03-05 11:34:48,214 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:34:54,369 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 11:34:54,376 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_721z271w 2026-03-05 11:34:54,405 Soop found: SOOP 2026-03-05 11:34:54,505 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/24/CAL/solo_CAL_stix-cal-energy_20231024T000408-20231024T022808_V02.fits 2026-03-05 11:34:54,666 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zbxag_jd 2026-03-05 11:34:54,666 Read config from in: /tmp/ecc_context_ecc_cfg_1_zbxag_jd/post_ecc.ini 2026-03-05 11:34:55,914 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zbxag_jd/solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits 2026-03-05 11:45:44,706 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:45:50,891 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 11:45:50,898 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zbxag_jd 2026-03-05 11:45:50,927 Soop found: SOOP 2026-03-05 11:45:51,026 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/08/CAL/solo_CAL_stix-cal-energy_20231008T020335-20231008T043043_V02.fits 2026-03-05 11:45:51,183 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cwqoqef_ 2026-03-05 11:45:51,183 Read config from in: /tmp/ecc_context_ecc_cfg_1_cwqoqef_/post_ecc.ini 2026-03-05 11:45:52,429 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cwqoqef_/solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits 2026-03-05 11:56:24,968 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 11:56:31,216 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 11:56:31,223 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cwqoqef_ 2026-03-05 11:56:31,253 Soop found: SOOP 2026-03-05 11:56:31,354 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/05/CAL/solo_CAL_stix-cal-energy_20231005T002207-20231005T025100_V02.fits 2026-03-05 11:56:31,797 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3zr8dwgl 2026-03-05 11:56:31,797 Read config from in: /tmp/ecc_context_ecc_cfg_1_3zr8dwgl/post_ecc.ini 2026-03-05 11:56:33,059 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3zr8dwgl/solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits 2026-03-05 12:08:30,972 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:08:37,161 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 12:08:37,169 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3zr8dwgl 2026-03-05 12:08:37,204 Soop found: SOOP 2026-03-05 12:08:37,306 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/14/CAL/solo_CAL_stix-cal-energy_20231014T025901-20231014T052300_V02.fits 2026-03-05 12:08:37,477 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8s1to04b 2026-03-05 12:08:37,478 Read config from in: /tmp/ecc_context_ecc_cfg_1_8s1to04b/post_ecc.ini 2026-03-05 12:08:38,806 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8s1to04b/solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits 2026-03-05 12:21:32,360 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:21:40,225 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 12:21:40,236 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8s1to04b 2026-03-05 12:21:40,263 Soop found: SOOP 2026-03-05 12:21:40,361 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/07/CAL/solo_CAL_stix-cal-energy_20231007T011129-20231007T033833_V02.fits 2026-03-05 12:21:40,522 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h5oz4xu5 2026-03-05 12:21:40,522 Read config from in: /tmp/ecc_context_ecc_cfg_1_h5oz4xu5/post_ecc.ini 2026-03-05 12:21:41,765 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h5oz4xu5/solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits 2026-03-05 12:31:04,016 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:31:10,193 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 12:31:10,200 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h5oz4xu5 2026-03-05 12:31:10,227 Soop found: SOOP 2026-03-05 12:31:10,328 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/20/CAL/solo_CAL_stix-cal-energy_20231020T030559-20231020T053104_V02.fits 2026-03-05 12:31:10,715 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5iqpol3q 2026-03-05 12:31:10,716 Read config from in: /tmp/ecc_context_ecc_cfg_1_5iqpol3q/post_ecc.ini 2026-03-05 12:31:11,958 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5iqpol3q/solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits 2026-03-05 12:41:50,761 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:41:56,957 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 12:41:56,964 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5iqpol3q 2026-03-05 12:41:56,991 Soop found: SOOP 2026-03-05 12:41:57,092 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/06/CAL/solo_CAL_stix-cal-energy_20231006T011123-20231006T033523_V02.fits 2026-03-05 12:41:57,261 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kjmscdri 2026-03-05 12:41:57,262 Read config from in: /tmp/ecc_context_ecc_cfg_1_kjmscdri/post_ecc.ini 2026-03-05 12:41:58,499 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kjmscdri/solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits 2026-03-05 12:52:19,480 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 96 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 12:52:25,768 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,771 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,772 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,772 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,772 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 12:52:25,777 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kjmscdri 2026-03-05 12:52:25,804 Soop found: SOOP 2026-03-05 12:52:25,902 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/03/CAL/solo_CAL_stix-cal-energy_20231003T023906-20231003T044711_V02.fits 2026-03-05 12:52:26,063 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xg5nqlxa 2026-03-05 12:52:26,064 Read config from in: /tmp/ecc_context_ecc_cfg_1_xg5nqlxa/post_ecc.ini 2026-03-05 12:52:27,308 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xg5nqlxa/solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits 2026-03-05 13:01:58,324 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:02:04,606 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:02:04,613 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xg5nqlxa 2026-03-05 13:02:04,642 Soop found: SOOP 2026-03-05 13:02:04,741 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/17/CAL/solo_CAL_stix-cal-energy_20231017T030024-20231017T052432_V02.fits 2026-03-05 13:02:05,184 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gm1vtkdm 2026-03-05 13:02:05,185 Read config from in: /tmp/ecc_context_ecc_cfg_1_gm1vtkdm/post_ecc.ini 2026-03-05 13:02:06,440 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gm1vtkdm/solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits 2026-03-05 13:11:43,353 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231031_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:11:49,686 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:11:49,693 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gm1vtkdm 2026-03-05 13:11:49,722 Soop found: SOOP 2026-03-05 13:11:49,820 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/31/CAL/solo_CAL_stix-cal-energy_20231031T020144-20231031T042549_V02.fits 2026-03-05 13:11:49,995 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s5cfl252 2026-03-05 13:11:49,996 Read config from in: /tmp/ecc_context_ecc_cfg_1_s5cfl252/post_ecc.ini 2026-03-05 13:11:52,841 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s5cfl252/solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits 2026-03-05 13:21:26,967 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:21:33,223 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:21:33,230 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s5cfl252 2026-03-05 13:21:33,256 Soop found: SOOP 2026-03-05 13:21:33,354 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/18/CAL/solo_CAL_stix-cal-energy_20231018T030549-20231018T052948_V02.fits 2026-03-05 13:21:33,793 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wavnbnq8 2026-03-05 13:21:33,793 Read config from in: /tmp/ecc_context_ecc_cfg_1_wavnbnq8/post_ecc.ini 2026-03-05 13:21:35,052 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wavnbnq8/solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits 2026-03-05 13:31:36,932 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:31:43,081 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:31:43,088 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wavnbnq8 2026-03-05 13:31:43,115 Soop found: SOOP 2026-03-05 13:31:43,212 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/23/CAL/solo_CAL_stix-cal-energy_20231023T000401-20231023T022801_V02.fits 2026-03-05 13:31:43,366 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qrpp35o4 2026-03-05 13:31:43,367 Read config from in: /tmp/ecc_context_ecc_cfg_1_qrpp35o4/post_ecc.ini 2026-03-05 13:31:44,604 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qrpp35o4/solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits 2026-03-05 13:41:15,865 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:41:22,114 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:41:22,122 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qrpp35o4 2026-03-05 13:41:22,149 Soop found: SOOP 2026-03-05 13:41:22,251 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/16/CAL/solo_CAL_stix-cal-energy_20231016T030018-20231016T052418_V02.fits 2026-03-05 13:41:22,415 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bjdhh8kp 2026-03-05 13:41:22,415 Read config from in: /tmp/ecc_context_ecc_cfg_1_bjdhh8kp/post_ecc.ini 2026-03-05 13:41:23,664 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bjdhh8kp/solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits 2026-03-05 13:50:47,473 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 13:50:53,734 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 13:50:53,741 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bjdhh8kp 2026-03-05 13:50:53,770 Soop found: SOOP 2026-03-05 13:50:53,868 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/21/CAL/solo_CAL_stix-cal-energy_20231021T052901-20231021T075301_V02.fits 2026-03-05 13:50:54,033 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lvkxzj57 2026-03-05 13:50:54,034 Read config from in: /tmp/ecc_context_ecc_cfg_1_lvkxzj57/post_ecc.ini 2026-03-05 13:50:55,340 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lvkxzj57/solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits 2026-03-05 14:00:14,240 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:00:20,463 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:00:20,470 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lvkxzj57 2026-03-05 14:00:20,498 Soop found: SOOP 2026-03-05 14:00:20,598 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/12/CAL/solo_CAL_stix-cal-energy_20231012T025848-20231012T052248_V02.fits 2026-03-05 14:00:20,769 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__tik5bet 2026-03-05 14:00:20,770 Read config from in: /tmp/ecc_context_ecc_cfg_1__tik5bet/post_ecc.ini 2026-03-05 14:00:22,032 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__tik5bet/solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits 2026-03-05 14:09:58,520 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:10:06,905 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:10:06,913 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__tik5bet 2026-03-05 14:10:06,942 No soops found for time: 2023-10-27 01:44:31.083808 - 2023-10-27 04:08:31.099549 2026-03-05 14:10:07,047 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/27/CAL/solo_CAL_stix-cal-energy_20231027T014431-20231027T040831_V02.fits 2026-03-05 14:10:07,219 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w3haamqz 2026-03-05 14:10:07,219 Read config from in: /tmp/ecc_context_ecc_cfg_1_w3haamqz/post_ecc.ini 2026-03-05 14:10:08,494 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w3haamqz/solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits 2026-03-05 14:20:07,728 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:20:13,907 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:20:13,914 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w3haamqz 2026-03-05 14:20:13,941 Soop found: SOOP 2026-03-05 14:20:13,941 Soop found: SOOP 2026-03-05 14:20:14,040 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/11/CAL/solo_CAL_stix-cal-energy_20231011T024258-20231011T050749_V02.fits 2026-03-05 14:20:14,442 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__fyz8p30 2026-03-05 14:20:14,443 Read config from in: /tmp/ecc_context_ecc_cfg_1__fyz8p30/post_ecc.ini 2026-03-05 14:20:15,683 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__fyz8p30/solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits 2026-03-05 14:29:41,863 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:29:48,035 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:29:48,042 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__fyz8p30 2026-03-05 14:29:48,068 Soop found: SOOP 2026-03-05 14:29:48,168 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/26/CAL/solo_CAL_stix-cal-energy_20231026T000421-20231026T023803_V02.fits 2026-03-05 14:29:48,329 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vu63fdfj 2026-03-05 14:29:48,330 Read config from in: /tmp/ecc_context_ecc_cfg_1_vu63fdfj/post_ecc.ini 2026-03-05 14:29:49,576 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vu63fdfj/solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits 2026-03-05 14:39:17,545 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:39:23,712 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:39:23,720 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vu63fdfj 2026-03-05 14:39:23,748 Soop found: SOOP 2026-03-05 14:39:23,849 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/19/CAL/solo_CAL_stix-cal-energy_20231019T030554-20231019T052953_V02.fits 2026-03-05 14:39:24,286 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lxsnnlal 2026-03-05 14:39:24,287 Read config from in: /tmp/ecc_context_ecc_cfg_1_lxsnnlal/post_ecc.ini 2026-03-05 14:39:25,530 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lxsnnlal/solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits 2026-03-05 14:49:06,019 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:49:12,199 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 14:49:12,206 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lxsnnlal 2026-03-05 14:49:12,234 Soop found: SOOP 2026-03-05 14:49:12,330 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/22/CAL/solo_CAL_stix-cal-energy_20231022T052907-20231022T072012_V02.fits 2026-03-05 14:49:12,496 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_82b3gp1z 2026-03-05 14:49:12,496 Read config from in: /tmp/ecc_context_ecc_cfg_1_82b3gp1z/post_ecc.ini 2026-03-05 14:49:13,750 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_82b3gp1z/solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits 2026-03-05 14:58:56,439 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 14:59:02,707 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 14:59:02,714 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_82b3gp1z 2026-03-05 14:59:02,742 Soop found: SOOP 2026-03-05 14:59:02,843 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/25/CAL/solo_CAL_stix-cal-energy_20231025T000415-20231025T022815_V02.fits 2026-03-05 14:59:03,010 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4jju9lvt 2026-03-05 14:59:03,011 Read config from in: /tmp/ecc_context_ecc_cfg_1_4jju9lvt/post_ecc.ini 2026-03-05 14:59:05,657 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4jju9lvt/solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits 2026-03-05 15:08:47,682 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 15:08:53,883 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 15:08:53,890 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4jju9lvt 2026-03-05 15:08:53,915 Soop found: SOOP 2026-03-05 15:08:53,915 Soop found: SOOP 2026-03-05 15:08:54,014 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/28/CAL/solo_CAL_stix-cal-energy_20231028T014437-20231028T040837_V02.fits 2026-03-05 15:08:54,159 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nv3c7kyz 2026-03-05 15:08:54,159 Read config from in: /tmp/ecc_context_ecc_cfg_1_nv3c7kyz/post_ecc.ini 2026-03-05 15:08:55,392 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nv3c7kyz/solo_L1_stix-cal-energy_20231009_V03_ecc_in.fits 2026-03-05 15:19:23,641 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231009_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231009_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231009_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231009_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 15:19:29,841 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 15:19:29,849 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nv3c7kyz 2026-03-05 15:19:29,876 Soop found: SOOP 2026-03-05 15:19:29,976 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/09/CAL/solo_CAL_stix-cal-energy_20231009T024246-20231009T050646_V02.fits 2026-03-05 15:19:30,145 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rioo8w_r 2026-03-05 15:19:30,146 Read config from in: /tmp/ecc_context_ecc_cfg_1_rioo8w_r/post_ecc.ini 2026-03-05 15:19:31,395 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rioo8w_r/solo_L1_stix-cal-energy_20231029_V03_ecc_in.fits 2026-03-05 15:29:21,388 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231029_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231029_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231029_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231029_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 15:29:27,635 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 15:29:27,643 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rioo8w_r 2026-03-05 15:29:27,672 Soop found: SOOP 2026-03-05 15:29:27,775 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/29/CAL/solo_CAL_stix-cal-energy_20231029T014443-20231029T040942_V02.fits 2026-03-05 15:29:27,939 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_41y0hmol 2026-03-05 15:29:27,939 Read config from in: /tmp/ecc_context_ecc_cfg_1_41y0hmol/post_ecc.ini 2026-03-05 15:29:29,210 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_41y0hmol/solo_L1_stix-cal-energy_20231002_V03_ecc_in.fits 2026-03-05 15:39:43,237 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231002_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231002_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231002_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231002_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 96 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 15:39:49,372 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 15:39:49,374 ECC result Gain_Cor 0.0 for DET 9 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,374 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,375 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-05 15:39:49,380 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_41y0hmol 2026-03-05 15:39:49,407 Soop found: SOOP 2026-03-05 15:39:49,504 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/02/CAL/solo_CAL_stix-cal-energy_20231002T023900-20231002T050300_V02.fits 2026-03-05 15:39:49,893 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p8czmc0m 2026-03-05 15:39:49,893 Read config from in: /tmp/ecc_context_ecc_cfg_1_p8czmc0m/post_ecc.ini 2026-03-05 15:39:51,140 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p8czmc0m/solo_L1_stix-cal-energy_20231013_V03_ecc_in.fits 2026-03-05 15:49:31,451 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231013_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231013_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231013_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231013_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 15:49:37,641 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 15:49:37,648 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p8czmc0m 2026-03-05 15:49:37,675 Soop found: SOOP 2026-03-05 15:49:37,773 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/13/CAL/solo_CAL_stix-cal-energy_20231013T025854-20231013T052254_V02.fits 2026-03-05 15:49:37,936 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wwrqwnj2 2026-03-05 15:49:37,937 Read config from in: /tmp/ecc_context_ecc_cfg_1_wwrqwnj2/post_ecc.ini 2026-03-05 15:49:39,183 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wwrqwnj2/solo_L1_stix-cal-energy_20231015_V03_ecc_in.fits 2026-03-05 15:59:16,833 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231015_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231015_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231015_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231015_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 15:59:24,512 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 15:59:24,519 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wwrqwnj2 2026-03-05 15:59:24,544 Soop found: SOOP 2026-03-05 15:59:24,643 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/15/CAL/solo_CAL_stix-cal-energy_20231015T025906-20231015T052310_V02.fits 2026-03-05 15:59:24,812 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3_kzuwv_ 2026-03-05 15:59:24,812 Read config from in: /tmp/ecc_context_ecc_cfg_1_3_kzuwv_/post_ecc.ini 2026-03-05 15:59:26,048 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3_kzuwv_/solo_L1_stix-cal-energy_20231004_V03_ecc_in.fits 2026-03-05 16:09:31,890 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231004_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231004_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231004_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231004_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 16:09:39,167 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 16:09:39,175 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3_kzuwv_ 2026-03-05 16:09:39,202 Soop found: SOOP 2026-03-05 16:09:39,301 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/10/04/CAL/solo_CAL_stix-cal-energy_20231004T002200-20231004T024600_V02.fits 2026-03-05 16:09:39,470 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20221220.csv 2026-03-05 16:09:39,502 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ro1xeq72 2026-03-05 16:09:39,503 Read config from in: /tmp/ecc_context_ecc_cfg_1_ro1xeq72/post_ecc.ini 2026-03-05 16:09:40,738 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ro1xeq72/solo_L1_stix-cal-energy_20230130_V03_ecc_in.fits 2026-03-05 16:18:34,274 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230130_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230130_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 16:18:40,397 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 16:18:40,405 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ro1xeq72 2026-03-05 16:18:40,431 No soops found for time: 2023-01-30 00:07:55.622288 - 2023-01-30 02:31:55.637307 2026-03-05 16:18:40,546 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/30/CAL/solo_CAL_stix-cal-energy_20230130T000755-20230130T023155_V02.fits 2026-03-05 16:18:40,690 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20220918.csv 2026-03-05 16:18:40,720 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qikdp_19 2026-03-05 16:18:40,720 Read config from in: /tmp/ecc_context_ecc_cfg_1_qikdp_19/post_ecc.ini 2026-03-05 16:18:42,044 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qikdp_19/solo_L1_stix-cal-energy_20230110_V03_ecc_in.fits 2026-03-05 16:27:32,736 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230110_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230110_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 16:27:38,946 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 16:27:38,953 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qikdp_19 2026-03-05 16:27:38,980 No soops found for time: 2023-01-10 00:34:52.633778 - 2023-01-10 03:05:55.649532 2026-03-05 16:27:39,079 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/10/CAL/solo_CAL_stix-cal-energy_20230110T003452-20230110T030555_V02.fits 2026-03-05 16:27:39,240 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z37vcntl 2026-03-05 16:27:39,241 Read config from in: /tmp/ecc_context_ecc_cfg_1_z37vcntl/post_ecc.ini 2026-03-05 16:27:40,477 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z37vcntl/solo_L1_stix-cal-energy_20230101_V03_ecc_in.fits 2026-03-05 16:36:28,536 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 16:36:34,721 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 16:36:34,728 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z37vcntl 2026-03-05 16:36:34,752 No soops found for time: 2023-01-01 19:06:04.399253 - 2023-01-01 21:30:26.414277 2026-03-05 16:36:34,853 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/01/CAL/solo_CAL_stix-cal-energy_20230101T190604-20230101T213026_V02.fits 2026-03-05 16:36:34,992 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20221214.csv 2026-03-05 16:36:35,024 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lnicwdbq 2026-03-05 16:36:35,025 Read config from in: /tmp/ecc_context_ecc_cfg_1_lnicwdbq/post_ecc.ini 2026-03-05 16:36:36,286 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lnicwdbq/solo_L1_stix-cal-energy_20230124_V03_ecc_in.fits 2026-03-05 16:45:41,898 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 16:45:49,516 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 16:45:49,523 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lnicwdbq 2026-03-05 16:45:49,548 No soops found for time: 2023-01-24 19:13:49.840672 - 2023-01-24 21:37:48.855689 2026-03-05 16:45:49,643 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/24/CAL/solo_CAL_stix-cal-energy_20230124T191349-20230124T213748_V02.fits 2026-03-05 16:45:49,806 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vcjlal5i 2026-03-05 16:45:49,807 Read config from in: /tmp/ecc_context_ecc_cfg_1_vcjlal5i/post_ecc.ini 2026-03-05 16:45:51,037 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vcjlal5i/solo_L1_stix-cal-energy_20230108_V03_ecc_in.fits 2026-03-05 16:54:46,851 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230108_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230108_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 16:54:53,040 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 16:54:53,047 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vcjlal5i 2026-03-05 16:54:53,073 No soops found for time: 2023-01-08 00:16:46.330758 - 2023-01-08 02:42:33.345930 2026-03-05 16:54:53,171 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/08/CAL/solo_CAL_stix-cal-energy_20230108T001646-20230108T024233_V02.fits 2026-03-05 16:54:53,572 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_29l9apmv 2026-03-05 16:54:53,572 Read config from in: /tmp/ecc_context_ecc_cfg_1_29l9apmv/post_ecc.ini 2026-03-05 16:54:54,811 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_29l9apmv/solo_L1_stix-cal-energy_20230105_V03_ecc_in.fits 2026-03-05 17:03:39,771 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230105_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230105_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 17:03:46,090 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-05 17:03:46,093 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:03:46,099 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_29l9apmv 2026-03-05 17:03:46,125 No soops found for time: 2023-01-05 19:11:37.999278 - 2023-01-05 19:40:28.002279 2026-03-05 17:03:46,222 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/05/CAL/solo_CAL_stix-cal-energy_20230105T191137-20230105T194028_V02.fits 2026-03-05 17:03:46,656 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_av6_axqe 2026-03-05 17:03:46,657 Read config from in: /tmp/ecc_context_ecc_cfg_1_av6_axqe/post_ecc.ini 2026-03-05 17:03:47,898 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_av6_axqe/solo_L1_stix-cal-energy_20230114_V03_ecc_in.fits 2026-03-05 17:12:54,089 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 17:13:00,322 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 17:13:00,329 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_av6_axqe 2026-03-05 17:13:00,356 No soops found for time: 2023-01-14 01:57:07.241773 - 2023-01-14 04:21:06.256772 2026-03-05 17:13:00,456 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/14/CAL/solo_CAL_stix-cal-energy_20230114T015707-20230114T042106_V02.fits 2026-03-05 17:13:00,889 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l803g395 2026-03-05 17:13:00,890 Read config from in: /tmp/ecc_context_ecc_cfg_1_l803g395/post_ecc.ini 2026-03-05 17:13:02,144 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l803g395/solo_L1_stix-cal-energy_20230107_V03_ecc_in.fits 2026-03-05 17:21:47,894 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230107_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230107_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 17:21:54,067 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 17:21:54,074 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l803g395 2026-03-05 17:21:54,102 No soops found for time: 2023-01-07 00:12:05.180408 - 2023-01-07 02:36:10.195403 2026-03-05 17:21:54,199 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/07/CAL/solo_CAL_stix-cal-energy_20230107T001205-20230107T023610_V02.fits 2026-03-05 17:21:54,361 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uxuyfu34 2026-03-05 17:21:54,361 Read config from in: /tmp/ecc_context_ecc_cfg_1_uxuyfu34/post_ecc.ini 2026-03-05 17:21:55,603 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uxuyfu34/solo_L1_stix-cal-energy_20230120_V03_ecc_in.fits 2026-03-05 17:30:29,913 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230120_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230120_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 17:30:36,133 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 17:30:36,141 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uxuyfu34 2026-03-05 17:30:36,168 No soops found for time: 2023-01-20 17:36:45.227315 - 2023-01-20 20:00:45.241885 2026-03-05 17:30:36,268 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/20/CAL/solo_CAL_stix-cal-energy_20230120T173645-20230120T200045_V02.fits 2026-03-05 17:30:36,659 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__8z2pt6k 2026-03-05 17:30:36,660 Read config from in: /tmp/ecc_context_ecc_cfg_1__8z2pt6k/post_ecc.ini 2026-03-05 17:30:37,919 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__8z2pt6k/solo_L1_stix-cal-energy_20230106_V03_ecc_in.fits 2026-03-05 17:39:25,355 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230106_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230106_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 17:39:32,890 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 17:39:32,897 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__8z2pt6k 2026-03-05 17:39:32,921 No soops found for time: 2023-01-06 00:12:01.030540 - 2023-01-06 02:36:00.045524 2026-03-05 17:39:33,015 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/06/CAL/solo_CAL_stix-cal-energy_20230106T001201-20230106T023600_V02.fits 2026-03-05 17:39:33,175 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_anos2cpl 2026-03-05 17:39:33,176 Read config from in: /tmp/ecc_context_ecc_cfg_1_anos2cpl/post_ecc.ini 2026-03-05 17:39:34,417 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_anos2cpl/solo_L1_stix-cal-energy_20230103_V03_ecc_in.fits 2026-03-05 17:48:34,443 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230103_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230103_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 17:48:40,591 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 17:48:40,598 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_anos2cpl 2026-03-05 17:48:40,624 No soops found for time: 2023-01-03 19:11:28.699539 - 2023-01-03 21:35:28.714525 2026-03-05 17:48:40,723 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/03/CAL/solo_CAL_stix-cal-energy_20230103T191128-20230103T213528_V02.fits 2026-03-05 17:48:41,171 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xhgxy3_o 2026-03-05 17:48:41,171 Read config from in: /tmp/ecc_context_ecc_cfg_1_xhgxy3_o/post_ecc.ini 2026-03-05 17:48:42,416 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xhgxy3_o/solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits 2026-03-05 17:53:15,922 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 17:54:32,695 Run ecc post fit: replaced [73.7 %] gain offset pairs with 'better fits' 2026-03-05 17:54:32,697 ECC result Gain_Prime 1.6152522932999207 for DET 2 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-05 17:54:32,697 ECC result Gain_Prime 1.6152522932999207 for DET 4 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-03-05 17:54:32,697 ECC result Gain_Prime 1.6152522932999207 for DET 5 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-03-05 17:54:32,697 ECC result Gain_Prime 1.6152522932999207 for DET 10 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-03-05 17:54:32,697 ECC result Gain_Prime 1.6152522932999207 for DET 12 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-03-05 17:54:32,698 ECC result Gain_Prime 1.6152522932999207 for DET 17 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-05 17:54:32,698 ECC result Gain_Prime 1.6152522932999207 for DET 28 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-03-05 17:54:32,698 ECC result Gain_Prime 0.0 for DET 1 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,698 ECC result Gain_Prime 0.0 for DET 1 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,698 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,698 ECC result Gain_Prime 0.0 for DET 3 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,698 ECC result Gain_Prime 0.0 for DET 3 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 3 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 3 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 3 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 4 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 4 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 4 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 5 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 5 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 5 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,699 ECC result Gain_Prime 0.0 for DET 5 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 6 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 6 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 6 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 7 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 8 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,700 ECC result Gain_Prime 0.0 for DET 8 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 9 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 9 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 10 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 10 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 10 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 11 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 11 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 11 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,701 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 12 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 12 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 13 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 14 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 14 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 14 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 14 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 15 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,702 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 15 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 16 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 16 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 17 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 17 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 17 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 18 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 18 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,703 ECC result Gain_Prime 0.0 for DET 19 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 19 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 19 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 19 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 20 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 20 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 21 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 21 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 21 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 21 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 21 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,704 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 22 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 23 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 23 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 24 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 24 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 25 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 26 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 26 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,705 ECC result Gain_Prime 0.0 for DET 26 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 26 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 26 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 28 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 28 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 29 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 29 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 30 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 30 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 31 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,706 ECC result Gain_Prime 0.0 for DET 31 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,707 ECC result Gain_Prime 0.0 for DET 31 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,707 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,707 ECC result Gain_Prime 0.0 for DET 31 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,707 ECC result Gain_Prime 0.0 for DET 32 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,707 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,707 ECC result Gain_Prime 0.0 for DET 32 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-05 17:54:32,712 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xhgxy3_o 2026-03-05 17:54:32,746 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9gf1vuqi 2026-03-05 17:54:32,746 Read config from in: /tmp/ecc_context_ecc_cfg_1_9gf1vuqi/post_ecc.ini 2026-03-05 17:54:34,048 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9gf1vuqi/solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits 2026-03-05 18:03:07,967 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 18:03:14,350 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 18:03:14,356 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9gf1vuqi 2026-03-05 18:03:14,391 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_karwx9be 2026-03-05 18:03:14,391 Read config from in: /tmp/ecc_context_ecc_cfg_1_karwx9be/post_ecc.ini 2026-03-05 18:03:15,641 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_karwx9be/solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits 2026-03-05 18:12:01,178 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 18:12:07,357 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 18:12:07,364 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_karwx9be 2026-03-05 18:12:07,392 No soops found for time: 2023-01-31 00:08:00.772485 - 2023-01-31 00:08:12.772506 2026-03-05 18:12:07,487 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/31/CAL/solo_CAL_stix-cal-energy_20230131T000800-20230131T000812_V02.fits 2026-03-05 18:12:07,523 No soops found for time: 2023-01-31 00:14:30.773163 - 2023-01-31 00:32:30.775041 2026-03-05 18:12:07,616 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/31/CAL/solo_CAL_stix-cal-energy_20230131T001430-20230131T003230_V02.fits 2026-03-05 18:12:07,652 No soops found for time: 2023-01-31 03:18:00.792302 - 2023-01-31 05:46:22.807776 2026-03-05 18:12:07,744 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/31/CAL/solo_CAL_stix-cal-energy_20230131T031800-20230131T054622_V02.fits 2026-03-05 18:12:08,137 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ss0w5g8q 2026-03-05 18:12:08,138 Read config from in: /tmp/ecc_context_ecc_cfg_1_ss0w5g8q/post_ecc.ini 2026-03-05 18:12:09,390 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ss0w5g8q/solo_L1_stix-cal-energy_20230123_V03_ecc_in.fits 2026-03-05 18:20:56,964 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230123_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230123_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 18:21:04,603 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 18:21:04,610 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ss0w5g8q 2026-03-05 18:21:04,635 No soops found for time: 2023-01-23 19:13:44.689201 - 2023-01-23 21:37:44.704169 2026-03-05 18:21:04,736 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/23/CAL/solo_CAL_stix-cal-energy_20230123T191344-20230123T213744_V02.fits 2026-03-05 18:21:04,898 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oh23yzwd 2026-03-05 18:21:04,899 Read config from in: /tmp/ecc_context_ecc_cfg_1_oh23yzwd/post_ecc.ini 2026-03-05 18:21:06,141 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oh23yzwd/solo_L1_stix-cal-energy_20230116_V03_ecc_in.fits 2026-03-05 18:30:02,081 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230116_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230116_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 18:30:08,365 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 18:30:08,372 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oh23yzwd 2026-03-05 18:30:08,398 No soops found for time: 2023-01-16 01:57:16.541794 - 2023-01-16 02:50:32.547343 2026-03-05 18:30:08,495 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/16/CAL/solo_CAL_stix-cal-energy_20230116T015716-20230116T025032_V02.fits 2026-03-05 18:30:08,647 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ndj56e1g 2026-03-05 18:30:08,648 Read config from in: /tmp/ecc_context_ecc_cfg_1_ndj56e1g/post_ecc.ini 2026-03-05 18:30:09,898 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ndj56e1g/solo_L1_stix-cal-energy_20230121_V03_ecc_in.fits 2026-03-05 18:39:04,925 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230121_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230121_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 18:39:11,108 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 18:39:11,116 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ndj56e1g 2026-03-05 18:39:11,143 No soops found for time: 2023-01-21 17:36:49.379780 - 2023-01-21 20:00:49.394748 2026-03-05 18:39:11,245 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/21/CAL/solo_CAL_stix-cal-energy_20230121T173649-20230121T200049_V02.fits 2026-03-05 18:39:11,407 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0rtd8ycm 2026-03-05 18:39:11,408 Read config from in: /tmp/ecc_context_ecc_cfg_1_0rtd8ycm/post_ecc.ini 2026-03-05 18:39:12,649 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0rtd8ycm/solo_L1_stix-cal-energy_20230112_V03_ecc_in.fits 2026-03-05 18:48:04,212 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230112_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230112_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 18:48:10,355 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 18:48:10,362 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0rtd8ycm 2026-03-05 18:48:10,389 No soops found for time: 2023-01-12 01:56:51.942702 - 2023-01-12 04:20:51.957720 2026-03-05 18:48:10,485 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/12/CAL/solo_CAL_stix-cal-energy_20230112T015651-20230112T042051_V02.fits 2026-03-05 18:48:10,648 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jodc157p 2026-03-05 18:48:10,648 Read config from in: /tmp/ecc_context_ecc_cfg_1_jodc157p/post_ecc.ini 2026-03-05 18:48:11,897 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jodc157p/solo_L1_stix-cal-energy_20230127_V03_ecc_in.fits 2026-03-05 18:57:00,841 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230127_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230127_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 18:57:07,039 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 18:57:07,046 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jodc157p 2026-03-05 18:57:07,073 No soops found for time: 2023-01-27 19:14:05.291264 - 2023-01-27 21:38:05.306283 2026-03-05 18:57:07,175 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/27/CAL/solo_CAL_stix-cal-energy_20230127T191405-20230127T213805_V02.fits 2026-03-05 18:57:07,613 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xq6fmpll 2026-03-05 18:57:07,613 Read config from in: /tmp/ecc_context_ecc_cfg_1_xq6fmpll/post_ecc.ini 2026-03-05 18:57:08,871 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xq6fmpll/solo_L1_stix-cal-energy_20230111_V03_ecc_in.fits 2026-03-05 19:06:09,908 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230111_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230111_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 19:06:17,578 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 19:06:17,585 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xq6fmpll 2026-03-05 19:06:17,609 No soops found for time: 2023-01-11 01:56:47.792508 - 2023-01-11 04:20:46.807525 2026-03-05 19:06:17,702 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/11/CAL/solo_CAL_stix-cal-energy_20230111T015647-20230111T042046_V02.fits 2026-03-05 19:06:18,132 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3p0u7m6e 2026-03-05 19:06:18,133 Read config from in: /tmp/ecc_context_ecc_cfg_1_3p0u7m6e/post_ecc.ini 2026-03-05 19:06:19,374 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3p0u7m6e/solo_L1_stix-cal-energy_20230126_V03_ecc_in.fits 2026-03-05 19:15:04,117 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230126_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230126_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 19:15:10,205 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 19:15:10,212 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3p0u7m6e 2026-03-05 19:15:10,238 No soops found for time: 2023-01-26 19:14:01.141069 - 2023-01-26 21:38:00.156086 2026-03-05 19:15:10,332 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/26/CAL/solo_CAL_stix-cal-energy_20230126T191401-20230126T213800_V02.fits 2026-03-05 19:15:10,504 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rtqb2clx 2026-03-05 19:15:10,504 Read config from in: /tmp/ecc_context_ecc_cfg_1_rtqb2clx/post_ecc.ini 2026-03-05 19:15:11,742 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rtqb2clx/solo_L1_stix-cal-energy_20230119_V03_ecc_in.fits 2026-03-05 19:24:14,728 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230119_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230119_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 19:24:20,875 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 19:24:20,882 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rtqb2clx 2026-03-05 19:24:20,908 No soops found for time: 2023-01-19 17:36:41.085285 - 2023-01-19 20:00:40.100175 2026-03-05 19:24:21,011 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/19/CAL/solo_CAL_stix-cal-energy_20230119T173641-20230119T200040_V02.fits 2026-03-05 19:24:21,444 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9xtzkdl1 2026-03-05 19:24:21,444 Read config from in: /tmp/ecc_context_ecc_cfg_1_9xtzkdl1/post_ecc.ini 2026-03-05 19:24:22,687 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9xtzkdl1/solo_L1_stix-cal-energy_20230122_V03_ecc_in.fits 2026-03-05 19:33:05,804 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230122_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230122_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 19:33:12,101 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 19:33:12,108 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9xtzkdl1 2026-03-05 19:33:12,134 No soops found for time: 2023-01-22 17:36:54.529463 - 2023-01-22 20:04:56.544849 2026-03-05 19:33:12,234 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/22/CAL/solo_CAL_stix-cal-energy_20230122T173654-20230122T200456_V02.fits 2026-03-05 19:33:12,396 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b9gdpnvj 2026-03-05 19:33:12,397 Read config from in: /tmp/ecc_context_ecc_cfg_1_b9gdpnvj/post_ecc.ini 2026-03-05 19:33:13,639 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b9gdpnvj/solo_L1_stix-cal-energy_20230125_V03_ecc_in.fits 2026-03-05 19:42:06,393 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230125_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230125_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 19:42:12,600 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 19:42:12,607 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b9gdpnvj 2026-03-05 19:42:12,634 No soops found for time: 2023-01-25 19:13:53.990868 - 2023-01-25 21:37:54.005887 2026-03-05 19:42:12,729 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/25/CAL/solo_CAL_stix-cal-energy_20230125T191353-20230125T213754_V02.fits 2026-03-05 19:42:12,887 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3bq3yiqf 2026-03-05 19:42:12,887 Read config from in: /tmp/ecc_context_ecc_cfg_1_3bq3yiqf/post_ecc.ini 2026-03-05 19:42:14,132 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3bq3yiqf/solo_L1_stix-cal-energy_20230128_V03_ecc_in.fits 2026-03-05 19:51:03,806 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230128_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230128_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 19:51:09,935 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 19:51:09,942 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3bq3yiqf 2026-03-05 19:51:09,970 No soops found for time: 2023-01-28 19:14:10.441462 - 2023-01-28 21:38:10.456481 2026-03-05 19:51:10,066 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/28/CAL/solo_CAL_stix-cal-energy_20230128T191410-20230128T213810_V02.fits 2026-03-05 19:51:10,502 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_liv1iz9r 2026-03-05 19:51:10,503 Read config from in: /tmp/ecc_context_ecc_cfg_1_liv1iz9r/post_ecc.ini 2026-03-05 19:51:13,176 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_liv1iz9r/solo_L1_stix-cal-energy_20230109_V03_ecc_in.fits 2026-03-05 20:00:11,015 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230109_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230109_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 20:00:17,418 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 20:00:17,425 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_liv1iz9r 2026-03-05 20:00:17,457 No soops found for time: 2023-01-09 00:34:47.483583 - 2023-01-09 02:58:46.498600 2026-03-05 20:00:17,570 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/09/CAL/solo_CAL_stix-cal-energy_20230109T003447-20230109T025846_V02.fits 2026-03-05 20:00:17,977 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5agr2l36 2026-03-05 20:00:17,977 Read config from in: /tmp/ecc_context_ecc_cfg_1_5agr2l36/post_ecc.ini 2026-03-05 20:00:19,317 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5agr2l36/solo_L1_stix-cal-energy_20230129_V03_ecc_in.fits 2026-03-05 20:08:58,410 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230129_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230129_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 20:09:04,701 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 20:09:04,708 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5agr2l36 2026-03-05 20:09:04,735 No soops found for time: 2023-01-29 19:14:15.591659 - 2023-01-29 19:42:49.594639 2026-03-05 20:09:04,830 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/29/CAL/solo_CAL_stix-cal-energy_20230129T191415-20230129T194249_V02.fits 2026-03-05 20:09:04,990 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4rqqc7uu 2026-03-05 20:09:04,991 Read config from in: /tmp/ecc_context_ecc_cfg_1_4rqqc7uu/post_ecc.ini 2026-03-05 20:09:06,225 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4rqqc7uu/solo_L1_stix-cal-energy_20230102_V03_ecc_in.fits 2026-03-05 20:18:01,355 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230102_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230102_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 20:18:07,624 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 20:18:07,631 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4rqqc7uu 2026-03-05 20:18:07,658 No soops found for time: 2023-01-02 19:11:23.549668 - 2023-01-02 21:35:23.564654 2026-03-05 20:18:07,757 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/02/CAL/solo_CAL_stix-cal-energy_20230102T191123-20230102T213523_V02.fits 2026-03-05 20:18:07,915 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xq9b8mu6 2026-03-05 20:18:07,916 Read config from in: /tmp/ecc_context_ecc_cfg_1_xq9b8mu6/post_ecc.ini 2026-03-05 20:18:09,169 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xq9b8mu6/solo_L1_stix-cal-energy_20230113_V03_ecc_in.fits 2026-03-05 20:27:08,111 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230113_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230113_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 20:27:14,281 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 20:27:14,288 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xq9b8mu6 2026-03-05 20:27:14,314 No soops found for time: 2023-01-13 01:56:57.091753 - 2023-01-13 04:20:57.106753 2026-03-05 20:27:14,409 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/13/CAL/solo_CAL_stix-cal-energy_20230113T015657-20230113T042057_V02.fits 2026-03-05 20:27:14,575 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_elqlvqyp 2026-03-05 20:27:14,575 Read config from in: /tmp/ecc_context_ecc_cfg_1_elqlvqyp/post_ecc.ini 2026-03-05 20:27:15,833 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_elqlvqyp/solo_L1_stix-cal-energy_20230115_V03_ecc_in.fits 2026-03-05 20:36:06,207 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230115_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230115_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 20:36:12,343 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 20:36:12,350 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_elqlvqyp 2026-03-05 20:36:12,376 No soops found for time: 2023-01-15 01:57:12.391785 - 2023-01-15 04:21:12.406785 2026-03-05 20:36:12,471 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/15/CAL/solo_CAL_stix-cal-energy_20230115T015712-20230115T042112_V02.fits 2026-03-05 20:36:12,644 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zl4drv1b 2026-03-05 20:36:12,644 Read config from in: /tmp/ecc_context_ecc_cfg_1_zl4drv1b/post_ecc.ini 2026-03-05 20:36:13,893 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zl4drv1b/solo_L1_stix-cal-energy_20230104_V03_ecc_in.fits 2026-03-05 20:45:15,505 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230104_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230104_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 20:45:23,832 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 20:45:23,839 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zl4drv1b 2026-03-05 20:45:23,865 No soops found for time: 2023-01-04 19:11:33.849409 - 2023-01-04 21:35:32.864394 2026-03-05 20:45:23,964 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/01/04/CAL/solo_CAL_stix-cal-energy_20230104T191133-20230104T213532_V02.fits 2026-03-05 20:45:24,407 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5_ciyus_ 2026-03-05 20:45:24,408 Read config from in: /tmp/ecc_context_ecc_cfg_1_5_ciyus_/post_ecc.ini 2026-03-05 20:45:25,664 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5_ciyus_/solo_L1_stix-cal-energy_20230830_V03_ecc_in.fits 2026-03-05 20:54:55,832 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230830_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230830_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230830_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230830_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 20:55:01,964 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 20:55:01,971 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5_ciyus_ 2026-03-05 20:55:01,994 No soops found for time: 2023-08-30 03:00:39.947012 - 2023-08-30 05:24:39.962570 2026-03-05 20:55:02,101 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/30/CAL/solo_CAL_stix-cal-energy_20230830T030039-20230830T052439_V02.fits 2026-03-05 20:55:02,260 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_et5wl_f_ 2026-03-05 20:55:02,261 Read config from in: /tmp/ecc_context_ecc_cfg_1_et5wl_f_/post_ecc.ini 2026-03-05 20:55:03,495 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_et5wl_f_/solo_L1_stix-cal-energy_20230810_V03_ecc_in.fits 2026-03-05 21:04:25,073 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230810_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230810_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230810_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230810_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 21:04:31,178 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 21:04:31,185 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_et5wl_f_ 2026-03-05 21:04:31,208 No soops found for time: 2023-08-10 04:50:44.855208 - 2023-08-10 07:14:44.870651 2026-03-05 21:04:31,313 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/10/CAL/solo_CAL_stix-cal-energy_20230810T045044-20230810T071444_V02.fits 2026-03-05 21:04:31,471 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9jotiuoe 2026-03-05 21:04:31,472 Read config from in: /tmp/ecc_context_ecc_cfg_1_9jotiuoe/post_ecc.ini 2026-03-05 21:04:32,707 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9jotiuoe/solo_L1_stix-cal-energy_20230801_V03_ecc_in.fits 2026-03-05 21:14:03,537 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230801_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230801_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230801_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230801_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 21:14:09,858 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 21:14:09,870 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9jotiuoe 2026-03-05 21:14:09,897 No soops found for time: 2023-08-01 01:13:07.449822 - 2023-08-01 03:38:25.465110 2026-03-05 21:14:09,998 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/01/CAL/solo_CAL_stix-cal-energy_20230801T011307-20230801T033825_V02.fits 2026-03-05 21:14:10,190 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vjn1j_dv 2026-03-05 21:14:10,190 Read config from in: /tmp/ecc_context_ecc_cfg_1_vjn1j_dv/post_ecc.ini 2026-03-05 21:14:11,472 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vjn1j_dv/solo_L1_stix-cal-energy_20230824_V03_ecc_in.fits 2026-03-05 21:23:43,561 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230824_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230824_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230824_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230824_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 21:23:49,659 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 21:23:49,669 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vjn1j_dv 2026-03-05 21:23:49,694 No soops found for time: 2023-08-24 00:08:44.994132 - 2023-08-24 02:32:45.009647 2026-03-05 21:23:49,790 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/24/CAL/solo_CAL_stix-cal-energy_20230824T000844-20230824T023245_V02.fits 2026-03-05 21:23:49,948 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5oom42jj 2026-03-05 21:23:49,948 Read config from in: /tmp/ecc_context_ecc_cfg_1_5oom42jj/post_ecc.ini 2026-03-05 21:23:51,197 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5oom42jj/solo_L1_stix-cal-energy_20230808_V03_ecc_in.fits 2026-03-05 21:33:25,784 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230808_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230808_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230808_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230808_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 21:33:31,924 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 21:33:31,934 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5oom42jj 2026-03-05 21:33:31,959 No soops found for time: 2023-08-08 03:51:56.540057 - 2023-08-08 06:21:47.556127 2026-03-05 21:33:32,056 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/08/CAL/solo_CAL_stix-cal-energy_20230808T035156-20230808T062147_V02.fits 2026-03-05 21:33:32,448 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wye0nna9 2026-03-05 21:33:32,449 Read config from in: /tmp/ecc_context_ecc_cfg_1_wye0nna9/post_ecc.ini 2026-03-05 21:33:35,072 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wye0nna9/solo_L1_stix-cal-energy_20230805_V03_ecc_in.fits 2026-03-05 21:43:01,537 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230805_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230805_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230805_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230805_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 21:43:07,747 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 21:43:07,754 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wye0nna9 2026-03-05 21:43:07,778 No soops found for time: 2023-08-05 01:26:33.063579 - 2023-08-05 03:50:33.078850 2026-03-05 21:43:07,875 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/05/CAL/solo_CAL_stix-cal-energy_20230805T012633-20230805T035033_V02.fits 2026-03-05 21:43:08,306 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ko10884n 2026-03-05 21:43:08,307 Read config from in: /tmp/ecc_context_ecc_cfg_1_ko10884n/post_ecc.ini 2026-03-05 21:43:09,544 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ko10884n/solo_L1_stix-cal-energy_20230814_V03_ecc_in.fits 2026-03-05 21:52:39,237 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230814_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230814_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230814_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230814_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 21:52:45,406 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 21:52:45,413 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ko10884n 2026-03-05 21:52:45,437 No soops found for time: 2023-08-14 10:44:00.510781 - 2023-08-14 13:08:00.526844 2026-03-05 21:52:45,532 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/14/CAL/solo_CAL_stix-cal-energy_20230814T104400-20230814T130800_V02.fits 2026-03-05 21:52:45,684 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0cq6ehf8 2026-03-05 21:52:45,684 Read config from in: /tmp/ecc_context_ecc_cfg_1_0cq6ehf8/post_ecc.ini 2026-03-05 21:52:46,910 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0cq6ehf8/solo_L1_stix-cal-energy_20230807_V03_ecc_in.fits 2026-03-05 22:02:24,730 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230807_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230807_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230807_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230807_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 22:02:30,981 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 22:02:30,988 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0cq6ehf8 2026-03-05 22:02:31,012 No soops found for time: 2023-08-07 00:22:01.362153 - 2023-08-07 02:57:31.378643 2026-03-05 22:02:31,109 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/07/CAL/solo_CAL_stix-cal-energy_20230807T002201-20230807T025731_V02.fits 2026-03-05 22:02:31,272 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_739g_smc 2026-03-05 22:02:31,273 Read config from in: /tmp/ecc_context_ecc_cfg_1_739g_smc/post_ecc.ini 2026-03-05 22:02:32,532 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_739g_smc/solo_L1_stix-cal-energy_20230820_V03_ecc_in.fits 2026-03-05 22:11:52,782 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230820_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230820_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230820_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230820_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 22:11:59,061 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 22:11:59,068 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_739g_smc 2026-03-05 22:11:59,093 No soops found for time: 2023-08-20 10:52:02.442858 - 2023-08-20 12:10:50.451348 2026-03-05 22:11:59,191 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/20/CAL/solo_CAL_stix-cal-energy_20230820T105202-20230820T121050_V02.fits 2026-03-05 22:11:59,347 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8lp94f2m 2026-03-05 22:11:59,348 Read config from in: /tmp/ecc_context_ecc_cfg_1_8lp94f2m/post_ecc.ini 2026-03-05 22:12:00,589 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8lp94f2m/solo_L1_stix-cal-energy_20230806_V03_ecc_in.fits 2026-03-05 22:21:20,942 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230806_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230806_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230806_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230806_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 22:21:27,100 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 22:21:27,107 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8lp94f2m 2026-03-05 22:21:27,132 No soops found for time: 2023-08-06 01:26:39.216298 - 2023-08-06 03:41:59.230650 2026-03-05 22:21:27,228 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/06/CAL/solo_CAL_stix-cal-energy_20230806T012639-20230806T034159_V02.fits 2026-03-05 22:21:27,385 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o9ns4xpe 2026-03-05 22:21:27,386 Read config from in: /tmp/ecc_context_ecc_cfg_1_o9ns4xpe/post_ecc.ini 2026-03-05 22:21:28,635 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o9ns4xpe/solo_L1_stix-cal-energy_20230803_V03_ecc_in.fits 2026-03-05 22:30:54,089 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230803_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230803_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230803_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230803_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 22:31:02,639 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 22:31:02,646 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o9ns4xpe 2026-03-05 22:31:02,673 No soops found for time: 2023-08-03 01:26:20.754237 - 2023-08-03 03:50:20.769389 2026-03-05 22:31:02,780 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/03/CAL/solo_CAL_stix-cal-energy_20230803T012620-20230803T035020_V02.fits 2026-03-05 22:31:02,955 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vycfrbch 2026-03-05 22:31:02,956 Read config from in: /tmp/ecc_context_ecc_cfg_1_vycfrbch/post_ecc.ini 2026-03-05 22:31:04,251 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vycfrbch/solo_L1_stix-cal-energy_20230817_V03_ecc_in.fits 2026-03-05 22:40:30,580 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230817_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230817_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230817_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230817_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 22:40:36,784 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 22:40:36,791 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vycfrbch 2026-03-05 22:40:36,814 No soops found for time: 2023-08-17 10:51:44.976927 - 2023-08-17 13:15:44.992397 2026-03-05 22:40:36,907 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/17/CAL/solo_CAL_stix-cal-energy_20230817T105144-20230817T131544_V02.fits 2026-03-05 22:40:37,067 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4rishq81 2026-03-05 22:40:37,068 Read config from in: /tmp/ecc_context_ecc_cfg_1_4rishq81/post_ecc.ini 2026-03-05 22:40:38,310 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4rishq81/solo_L1_stix-cal-energy_20230831_V03_ecc_in.fits 2026-03-05 22:50:13,409 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230831_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230831_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230831_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230831_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 22:50:19,616 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 22:50:19,624 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4rishq81 2026-03-05 22:50:19,648 No soops found for time: 2023-08-31 03:00:46.102604 - 2023-08-31 05:24:46.118162 2026-03-05 22:50:19,741 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/31/CAL/solo_CAL_stix-cal-energy_20230831T030046-20230831T052446_V02.fits 2026-03-05 22:50:19,897 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wfg06hrl 2026-03-05 22:50:19,897 Read config from in: /tmp/ecc_context_ecc_cfg_1_wfg06hrl/post_ecc.ini 2026-03-05 22:50:21,138 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wfg06hrl/solo_L1_stix-cal-energy_20230818_V03_ecc_in.fits 2026-03-05 22:59:51,813 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230818_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230818_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230818_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230818_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 22:59:58,069 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 22:59:58,075 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wfg06hrl 2026-03-05 22:59:58,100 No soops found for time: 2023-08-18 10:51:51.131645 - 2023-08-18 13:15:50.147114 2026-03-05 22:59:58,194 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/18/CAL/solo_CAL_stix-cal-energy_20230818T105151-20230818T131550_V02.fits 2026-03-05 22:59:58,350 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lkmx1lbm 2026-03-05 22:59:58,350 Read config from in: /tmp/ecc_context_ecc_cfg_1_lkmx1lbm/post_ecc.ini 2026-03-05 22:59:59,603 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lkmx1lbm/solo_L1_stix-cal-energy_20230823_V03_ecc_in.fits 2026-03-05 23:09:29,159 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230823_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230823_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230823_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230823_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 23:09:35,292 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 23:09:35,299 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lkmx1lbm 2026-03-05 23:09:35,323 No soops found for time: 2023-08-23 00:08:38.838976 - 2023-08-23 02:32:38.854490 2026-03-05 23:09:35,416 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/23/CAL/solo_CAL_stix-cal-energy_20230823T000838-20230823T023238_V02.fits 2026-03-05 23:09:35,571 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_50ya3iha 2026-03-05 23:09:35,572 Read config from in: /tmp/ecc_context_ecc_cfg_1_50ya3iha/post_ecc.ini 2026-03-05 23:09:36,812 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_50ya3iha/solo_L1_stix-cal-energy_20230816_V03_ecc_in.fits 2026-03-05 23:19:11,568 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230816_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230816_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230816_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230816_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 23:19:17,699 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 23:19:17,706 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_50ya3iha 2026-03-05 23:19:17,730 No soops found for time: 2023-08-16 10:51:38.822208 - 2023-08-16 13:15:38.837679 2026-03-05 23:19:17,823 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/16/CAL/solo_CAL_stix-cal-energy_20230816T105138-20230816T131538_V02.fits 2026-03-05 23:19:18,259 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9ht66jps 2026-03-05 23:19:18,260 Read config from in: /tmp/ecc_context_ecc_cfg_1_9ht66jps/post_ecc.ini 2026-03-05 23:19:19,577 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9ht66jps/solo_L1_stix-cal-energy_20230821_V03_ecc_in.fits 2026-03-05 23:28:53,136 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230821_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230821_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230821_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230821_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 23:29:00,718 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 23:29:00,725 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9ht66jps 2026-03-05 23:29:00,749 No soops found for time: 2023-08-21 00:03:40.528149 - 2023-08-21 02:27:40.543664 2026-03-05 23:29:00,849 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/21/CAL/solo_CAL_stix-cal-energy_20230821T000340-20230821T022740_V02.fits 2026-03-05 23:29:01,252 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hus8_40j 2026-03-05 23:29:01,253 Read config from in: /tmp/ecc_context_ecc_cfg_1_hus8_40j/post_ecc.ini 2026-03-05 23:29:02,501 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hus8_40j/solo_L1_stix-cal-energy_20230812_V03_ecc_in.fits 2026-03-05 23:38:29,150 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230812_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230812_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230812_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230812_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 23:38:35,289 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 23:38:35,296 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hus8_40j 2026-03-05 23:38:35,320 No soops found for time: 2023-08-12 04:50:57.164075 - 2023-08-12 07:14:56.179516 2026-03-05 23:38:35,413 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/12/CAL/solo_CAL_stix-cal-energy_20230812T045057-20230812T071456_V02.fits 2026-03-05 23:38:35,808 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_esc3rvnx 2026-03-05 23:38:35,809 Read config from in: /tmp/ecc_context_ecc_cfg_1_esc3rvnx/post_ecc.ini 2026-03-05 23:38:37,046 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_esc3rvnx/solo_L1_stix-cal-energy_20230827_V03_ecc_in.fits 2026-03-05 23:48:13,435 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230827_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230827_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230827_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230827_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 23:48:19,557 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 23:48:19,563 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_esc3rvnx 2026-03-05 23:48:19,587 No soops found for time: 2023-08-27 00:09:03.461728 - 2023-08-27 02:37:55.477812 2026-03-05 23:48:19,681 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/27/CAL/solo_CAL_stix-cal-energy_20230827T000903-20230827T023755_V02.fits 2026-03-05 23:48:19,846 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_igrt_i5u 2026-03-05 23:48:19,847 Read config from in: /tmp/ecc_context_ecc_cfg_1_igrt_i5u/post_ecc.ini 2026-03-05 23:48:21,101 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_igrt_i5u/solo_L1_stix-cal-energy_20230811_V03_ecc_in.fits 2026-03-05 23:58:02,655 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230811_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230811_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230811_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230811_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-05 23:58:08,807 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-05 23:58:08,814 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_igrt_i5u 2026-03-05 23:58:08,838 No soops found for time: 2023-08-11 04:50:51.009642 - 2023-08-11 07:14:51.025084 2026-03-05 23:58:08,931 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/11/CAL/solo_CAL_stix-cal-energy_20230811T045051-20230811T071451_V02.fits 2026-03-05 23:58:09,090 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k7ju3804 2026-03-05 23:58:09,091 Read config from in: /tmp/ecc_context_ecc_cfg_1_k7ju3804/post_ecc.ini 2026-03-05 23:58:10,336 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k7ju3804/solo_L1_stix-cal-energy_20230826_V03_ecc_in.fits 2026-03-06 00:07:51,097 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230826_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230826_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230826_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230826_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 00:07:57,197 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 00:07:57,203 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k7ju3804 2026-03-06 00:07:57,227 No soops found for time: 2023-08-26 00:08:57.306136 - 2023-08-26 02:32:57.321694 2026-03-06 00:07:57,320 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/26/CAL/solo_CAL_stix-cal-energy_20230826T000857-20230826T023257_V02.fits 2026-03-06 00:07:57,481 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dosyk2gw 2026-03-06 00:07:57,481 Read config from in: /tmp/ecc_context_ecc_cfg_1_dosyk2gw/post_ecc.ini 2026-03-06 00:07:58,724 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dosyk2gw/solo_L1_stix-cal-energy_20230819_V03_ecc_in.fits 2026-03-06 00:17:29,394 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230819_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230819_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230819_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230819_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 00:17:35,988 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 00:17:35,996 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dosyk2gw 2026-03-06 00:17:36,026 No soops found for time: 2023-08-19 10:51:57.286364 - 2023-08-19 13:15:56.301833 2026-03-06 00:17:36,131 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/19/CAL/solo_CAL_stix-cal-energy_20230819T105157-20230819T131556_V02.fits 2026-03-06 00:17:36,310 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_442oitb9 2026-03-06 00:17:36,311 Read config from in: /tmp/ecc_context_ecc_cfg_1_442oitb9/post_ecc.ini 2026-03-06 00:17:39,463 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_442oitb9/solo_L1_stix-cal-energy_20230822_V03_ecc_in.fits 2026-03-06 00:27:08,467 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230822_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230822_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230822_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230822_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 00:27:14,624 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 00:27:14,631 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_442oitb9 2026-03-06 00:27:14,656 No soops found for time: 2023-08-22 00:03:46.683306 - 2023-08-22 02:27:48.698824 2026-03-06 00:27:14,750 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/22/CAL/solo_CAL_stix-cal-energy_20230822T000346-20230822T022748_V02.fits 2026-03-06 00:27:14,909 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dj8acg3v 2026-03-06 00:27:14,910 Read config from in: /tmp/ecc_context_ecc_cfg_1_dj8acg3v/post_ecc.ini 2026-03-06 00:27:16,145 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dj8acg3v/solo_L1_stix-cal-energy_20230825_V03_ecc_in.fits 2026-03-06 00:36:41,528 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230825_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230825_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230825_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230825_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 00:36:47,685 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 00:36:47,694 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dj8acg3v 2026-03-06 00:36:47,721 No soops found for time: 2023-08-25 00:08:51.150543 - 2023-08-25 02:32:51.166101 2026-03-06 00:36:47,815 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/25/CAL/solo_CAL_stix-cal-energy_20230825T000851-20230825T023251_V02.fits 2026-03-06 00:36:47,978 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nzbkkqr4 2026-03-06 00:36:47,979 Read config from in: /tmp/ecc_context_ecc_cfg_1_nzbkkqr4/post_ecc.ini 2026-03-06 00:36:49,217 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nzbkkqr4/solo_L1_stix-cal-energy_20230828_V03_ecc_in.fits 2026-03-06 00:46:28,304 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230828_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230828_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230828_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230828_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 00:46:34,408 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 00:46:34,415 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nzbkkqr4 2026-03-06 00:46:34,440 No soops found for time: 2023-08-28 02:37:44.633373 - 2023-08-28 05:01:44.648931 2026-03-06 00:46:34,535 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/28/CAL/solo_CAL_stix-cal-energy_20230828T023744-20230828T050144_V02.fits 2026-03-06 00:46:34,957 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_duxp4ts2 2026-03-06 00:46:34,957 Read config from in: /tmp/ecc_context_ecc_cfg_1_duxp4ts2/post_ecc.ini 2026-03-06 00:46:36,198 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_duxp4ts2/solo_L1_stix-cal-energy_20230809_V03_ecc_in.fits 2026-03-06 00:55:56,247 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230809_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230809_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230809_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230809_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 00:56:02,366 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 00:56:02,376 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_duxp4ts2 2026-03-06 00:56:02,401 No soops found for time: 2023-08-09 04:50:38.700775 - 2023-08-09 07:14:38.716217 2026-03-06 00:56:02,494 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/09/CAL/solo_CAL_stix-cal-energy_20230809T045038-20230809T071438_V02.fits 2026-03-06 00:56:02,661 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_513b9csk 2026-03-06 00:56:02,662 Read config from in: /tmp/ecc_context_ecc_cfg_1_513b9csk/post_ecc.ini 2026-03-06 00:56:03,902 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_513b9csk/solo_L1_stix-cal-energy_20230829_V03_ecc_in.fits 2026-03-06 01:05:38,817 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230829_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230829_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230829_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230829_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 01:05:45,168 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 01:05:45,175 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_513b9csk 2026-03-06 01:05:45,200 No soops found for time: 2023-08-29 02:37:50.788965 - 2023-08-29 05:03:43.804727 2026-03-06 01:05:45,295 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/29/CAL/solo_CAL_stix-cal-energy_20230829T023750-20230829T050343_V02.fits 2026-03-06 01:05:45,460 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_au_p2yks 2026-03-06 01:05:45,460 Read config from in: /tmp/ecc_context_ecc_cfg_1_au_p2yks/post_ecc.ini 2026-03-06 01:05:46,709 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_au_p2yks/solo_L1_stix-cal-energy_20230802_V03_ecc_in.fits 2026-03-06 01:15:14,577 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230802_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230802_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230802_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230802_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 01:15:22,329 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 01:15:22,336 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_au_p2yks 2026-03-06 01:15:22,361 No soops found for time: 2023-08-02 01:26:15.602716 - 2023-08-02 03:50:14.617866 2026-03-06 01:15:22,464 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/02/CAL/solo_CAL_stix-cal-energy_20230802T012615-20230802T035014_V02.fits 2026-03-06 01:15:22,903 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bo2o2do8 2026-03-06 01:15:22,903 Read config from in: /tmp/ecc_context_ecc_cfg_1_bo2o2do8/post_ecc.ini 2026-03-06 01:15:24,178 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bo2o2do8/solo_L1_stix-cal-energy_20230813_V03_ecc_in.fits 2026-03-06 01:24:53,762 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230813_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230813_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230813_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230813_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 01:24:59,898 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 01:24:59,908 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bo2o2do8 2026-03-06 01:24:59,940 No soops found for time: 2023-08-13 04:51:06.318514 - 2023-08-13 07:34:00.335983 2026-03-06 01:25:00,038 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/13/CAL/solo_CAL_stix-cal-energy_20230813T045106-20230813T073400_V02.fits 2026-03-06 01:25:00,201 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e0grz6tb 2026-03-06 01:25:00,202 Read config from in: /tmp/ecc_context_ecc_cfg_1_e0grz6tb/post_ecc.ini 2026-03-06 01:25:01,450 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e0grz6tb/solo_L1_stix-cal-energy_20230815_V03_ecc_in.fits 2026-03-06 01:34:19,887 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230815_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230815_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230815_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230815_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 01:34:26,011 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 01:34:26,020 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e0grz6tb 2026-03-06 01:34:26,046 No soops found for time: 2023-08-15 10:44:06.666691 - 2023-08-15 13:08:48.682237 2026-03-06 01:34:26,142 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/15/CAL/solo_CAL_stix-cal-energy_20230815T104406-20230815T130848_V02.fits 2026-03-06 01:34:26,299 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ullbo8dg 2026-03-06 01:34:26,300 Read config from in: /tmp/ecc_context_ecc_cfg_1_ullbo8dg/post_ecc.ini 2026-03-06 01:34:27,542 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ullbo8dg/solo_L1_stix-cal-energy_20230804_V03_ecc_in.fits 2026-03-06 01:43:50,763 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230804_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230804_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230804_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230804_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 01:43:56,910 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 01:43:56,917 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ullbo8dg 2026-03-06 01:43:56,940 No soops found for time: 2023-08-04 01:26:26.905760 - 2023-08-04 03:50:26.920912 2026-03-06 01:43:57,034 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/08/04/CAL/solo_CAL_stix-cal-energy_20230804T012626-20230804T035026_V02.fits 2026-03-06 01:43:57,464 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_09ygof0g 2026-03-06 01:43:57,465 Read config from in: /tmp/ecc_context_ecc_cfg_1_09ygof0g/post_ecc.ini 2026-03-06 01:43:58,704 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_09ygof0g/solo_L1_stix-cal-energy_20230530_V03_ecc_in.fits 2026-03-06 01:52:39,288 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230530_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230530_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230530_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230530_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 01:52:45,374 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 01:52:45,382 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_09ygof0g 2026-03-06 01:52:45,407 No soops found for time: 2023-05-30 19:44:21.058966 - 2023-05-30 22:08:21.074127 2026-03-06 01:52:45,516 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/30/CAL/solo_CAL_stix-cal-energy_20230530T194421-20230530T220821_V02.fits 2026-03-06 01:52:45,676 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m9mpvjv4 2026-03-06 01:52:45,677 Read config from in: /tmp/ecc_context_ecc_cfg_1_m9mpvjv4/post_ecc.ini 2026-03-06 01:52:46,922 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m9mpvjv4/solo_L1_stix-cal-energy_20230510_V03_ecc_in.fits 2026-03-06 02:01:31,756 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230510_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230510_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230510_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230510_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 02:01:37,867 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 02:01:37,873 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m9mpvjv4 2026-03-06 02:01:37,898 No soops found for time: 2023-05-10 16:24:04.002295 - 2023-05-10 18:48:04.022285 2026-03-06 02:01:37,993 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/10/CAL/solo_CAL_stix-cal-energy_20230510T162404-20230510T184804_V02.fits 2026-03-06 02:01:38,155 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yjey53o4 2026-03-06 02:01:38,155 Read config from in: /tmp/ecc_context_ecc_cfg_1_yjey53o4/post_ecc.ini 2026-03-06 02:01:39,409 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yjey53o4/solo_L1_stix-cal-energy_20230501_V03_ecc_in.fits 2026-03-06 02:11:03,161 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230501_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230501_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230501_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230501_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 02:11:10,721 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 02:11:10,727 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yjey53o4 2026-03-06 02:11:10,752 No soops found for time: 2023-05-01 00:23:00.564496 - 2023-05-01 02:47:00.579850 2026-03-06 02:11:10,852 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/01/CAL/solo_CAL_stix-cal-energy_20230501T002300-20230501T024700_V02.fits 2026-03-06 02:11:11,013 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2tqastx9 2026-03-06 02:11:11,013 Read config from in: /tmp/ecc_context_ecc_cfg_1_2tqastx9/post_ecc.ini 2026-03-06 02:11:12,250 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2tqastx9/solo_L1_stix-cal-energy_20230524_V03_ecc_in.fits 2026-03-06 02:20:05,695 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230524_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230524_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230524_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230524_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 02:20:12,581 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 02:20:12,589 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2tqastx9 2026-03-06 02:20:12,619 No soops found for time: 2023-05-24 18:05:52.137768 - 2023-05-24 20:29:51.152997 2026-03-06 02:20:12,724 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/24/CAL/solo_CAL_stix-cal-energy_20230524T180552-20230524T202951_V02.fits 2026-03-06 02:20:13,166 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_me4n6vi0 2026-03-06 02:20:13,166 Read config from in: /tmp/ecc_context_ecc_cfg_1_me4n6vi0/post_ecc.ini 2026-03-06 02:20:14,438 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_me4n6vi0/solo_L1_stix-cal-energy_20230508_V03_ecc_in.fits 2026-03-06 02:29:09,585 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230508_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230508_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230508_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230508_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 02:29:15,655 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 02:29:15,661 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_me4n6vi0 2026-03-06 02:29:15,686 Soop found: SOOP 2026-03-06 02:29:15,781 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/08/CAL/solo_CAL_stix-cal-energy_20230508T162352-20230508T184751_V02.fits 2026-03-06 02:29:15,937 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zvzn6cmp 2026-03-06 02:29:15,938 Read config from in: /tmp/ecc_context_ecc_cfg_1_zvzn6cmp/post_ecc.ini 2026-03-06 02:29:17,171 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zvzn6cmp/solo_L1_stix-cal-energy_20230514_V03_ecc_in.fits 2026-03-06 02:38:00,485 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230514_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230514_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230514_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230514_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 02:38:06,656 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 02:38:06,663 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zvzn6cmp 2026-03-06 02:38:06,689 No soops found for time: 2023-05-14 16:24:27.610794 - 2023-05-14 18:48:58.625906 2026-03-06 02:38:06,786 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/14/CAL/solo_CAL_stix-cal-energy_20230514T162427-20230514T184858_V02.fits 2026-03-06 02:38:06,945 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f31xbtd6 2026-03-06 02:38:06,945 Read config from in: /tmp/ecc_context_ecc_cfg_1_f31xbtd6/post_ecc.ini 2026-03-06 02:38:08,202 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f31xbtd6/solo_L1_stix-cal-energy_20230520_V03_ecc_in.fits 2026-03-06 02:47:02,131 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230520_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230520_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230520_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230520_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 02:47:08,244 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 02:47:08,254 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f31xbtd6 2026-03-06 02:47:08,284 No soops found for time: 2023-05-20 17:20:50.525805 - 2023-05-20 19:44:50.540956 2026-03-06 02:47:08,385 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/20/CAL/solo_CAL_stix-cal-energy_20230520T172050-20230520T194450_V02.fits 2026-03-06 02:47:08,772 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xa2g2nod 2026-03-06 02:47:08,773 Read config from in: /tmp/ecc_context_ecc_cfg_1_xa2g2nod/post_ecc.ini 2026-03-06 02:47:10,012 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xa2g2nod/solo_L1_stix-cal-energy_20230503_V03_ecc_in.fits 2026-03-06 02:56:00,188 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230503_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230503_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230503_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230503_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 02:56:06,343 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 02:56:06,350 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xa2g2nod 2026-03-06 02:56:06,375 No soops found for time: 2023-05-03 01:42:36.878125 - 2023-05-03 04:06:36.893415 2026-03-06 02:56:06,470 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/03/CAL/solo_CAL_stix-cal-energy_20230503T014236-20230503T040636_V02.fits 2026-03-06 02:56:06,638 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oayt6xac 2026-03-06 02:56:06,638 Read config from in: /tmp/ecc_context_ecc_cfg_1_oayt6xac/post_ecc.ini 2026-03-06 02:56:09,316 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oayt6xac/solo_L1_stix-cal-energy_20230517_V03_ecc_in.fits 2026-03-06 03:04:56,705 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230517_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230517_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230517_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230517_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 03:05:02,836 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 03:05:02,842 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oayt6xac 2026-03-06 03:05:02,867 No soops found for time: 2023-05-17 17:20:32.071217 - 2023-05-17 19:44:32.086369 2026-03-06 03:05:02,966 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/17/CAL/solo_CAL_stix-cal-energy_20230517T172032-20230517T194432_V02.fits 2026-03-06 03:05:03,128 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4dw3r70d 2026-03-06 03:05:03,129 Read config from in: /tmp/ecc_context_ecc_cfg_1_4dw3r70d/post_ecc.ini 2026-03-06 03:05:04,370 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4dw3r70d/solo_L1_stix-cal-energy_20230531_V03_ecc_in.fits 2026-03-06 03:14:02,140 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230531_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230531_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230531_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230531_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 03:14:08,244 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 03:14:08,251 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4dw3r70d 2026-03-06 03:14:08,276 No soops found for time: 2023-05-31 19:44:27.210590 - 2023-05-31 22:08:26.225750 2026-03-06 03:14:08,369 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/31/CAL/solo_CAL_stix-cal-energy_20230531T194427-20230531T220826_V02.fits 2026-03-06 03:14:08,537 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_imz5irdf 2026-03-06 03:14:08,538 Read config from in: /tmp/ecc_context_ecc_cfg_1_imz5irdf/post_ecc.ini 2026-03-06 03:14:09,768 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_imz5irdf/solo_L1_stix-cal-energy_20230518_V03_ecc_in.fits 2026-03-06 03:22:51,401 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230518_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230518_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230518_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230518_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 03:22:57,535 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 03:22:57,542 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_imz5irdf 2026-03-06 03:22:57,568 No soops found for time: 2023-05-18 17:20:38.222746 - 2023-05-18 19:44:38.237898 2026-03-06 03:22:57,662 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/18/CAL/solo_CAL_stix-cal-energy_20230518T172038-20230518T194438_V02.fits 2026-03-06 03:22:57,825 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_brxs7wb1 2026-03-06 03:22:57,825 Read config from in: /tmp/ecc_context_ecc_cfg_1_brxs7wb1/post_ecc.ini 2026-03-06 03:22:59,064 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_brxs7wb1/solo_L1_stix-cal-energy_20230523_V03_ecc_in.fits 2026-03-06 03:31:57,996 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230523_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230523_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230523_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230523_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 03:32:04,280 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 03:32:04,287 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_brxs7wb1 2026-03-06 03:32:04,312 No soops found for time: 2023-05-23 18:05:45.985087 - 2023-05-23 20:29:45.000237 2026-03-06 03:32:04,411 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/23/CAL/solo_CAL_stix-cal-energy_20230523T180545-20230523T202945_V02.fits 2026-03-06 03:32:04,570 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2d9o5bcu 2026-03-06 03:32:04,571 Read config from in: /tmp/ecc_context_ecc_cfg_1_2d9o5bcu/post_ecc.ini 2026-03-06 03:32:05,837 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2d9o5bcu/solo_L1_stix-cal-energy_20230516_V03_ecc_in.fits 2026-03-06 03:40:45,002 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230516_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230516_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230516_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230516_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 03:40:51,193 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 03:40:51,200 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2d9o5bcu 2026-03-06 03:40:51,225 No soops found for time: 2023-05-16 17:20:25.917820 - 2023-05-16 19:44:25.932879 2026-03-06 03:40:51,320 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/16/CAL/solo_CAL_stix-cal-energy_20230516T172025-20230516T194425_V02.fits 2026-03-06 03:40:51,461 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l0qzsv06 2026-03-06 03:40:51,462 Read config from in: /tmp/ecc_context_ecc_cfg_1_l0qzsv06/post_ecc.ini 2026-03-06 03:40:52,698 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l0qzsv06/solo_L1_stix-cal-energy_20230521_V03_ecc_in.fits 2026-03-06 03:49:39,805 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230521_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230521_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230521_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230521_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 03:49:45,996 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 03:49:46,002 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l0qzsv06 2026-03-06 03:49:46,028 No soops found for time: 2023-05-21 17:20:56.677334 - 2023-05-21 19:46:09.692613 2026-03-06 03:49:46,124 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/21/CAL/solo_CAL_stix-cal-energy_20230521T172056-20230521T194609_V02.fits 2026-03-06 03:49:46,278 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3haz1n4a 2026-03-06 03:49:46,279 Read config from in: /tmp/ecc_context_ecc_cfg_1_3haz1n4a/post_ecc.ini 2026-03-06 03:49:48,882 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3haz1n4a/solo_L1_stix-cal-energy_20230512_V03_ecc_in.fits 2026-03-06 03:58:31,254 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230512_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230512_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230512_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230512_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 03:58:38,053 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 03:58:38,060 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3haz1n4a 2026-03-06 03:58:38,088 No soops found for time: 2023-05-12 16:24:16.309537 - 2023-05-12 18:48:15.324696 2026-03-06 03:58:38,190 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/12/CAL/solo_CAL_stix-cal-energy_20230512T162416-20230512T184815_V02.fits 2026-03-06 03:58:38,361 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ez2mefhm 2026-03-06 03:58:38,361 Read config from in: /tmp/ecc_context_ecc_cfg_1_ez2mefhm/post_ecc.ini 2026-03-06 03:58:39,631 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ez2mefhm/solo_L1_stix-cal-energy_20230527_V03_ecc_in.fits 2026-03-06 04:07:28,219 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230527_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230527_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230527_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230527_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 04:07:34,435 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 04:07:34,442 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ez2mefhm 2026-03-06 04:07:34,467 No soops found for time: 2023-05-27 18:06:09.594722 - 2023-05-27 20:30:09.609953 2026-03-06 04:07:34,560 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/27/CAL/solo_CAL_stix-cal-energy_20230527T180609-20230527T203009_V02.fits 2026-03-06 04:07:34,991 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t4ebq7jn 2026-03-06 04:07:34,991 Read config from in: /tmp/ecc_context_ecc_cfg_1_t4ebq7jn/post_ecc.ini 2026-03-06 04:07:36,230 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t4ebq7jn/solo_L1_stix-cal-energy_20230511_V03_ecc_in.fits 2026-03-06 04:16:10,133 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230511_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230511_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230511_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230511_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 04:16:16,276 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 04:16:16,282 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t4ebq7jn 2026-03-06 04:16:16,307 No soops found for time: 2023-05-11 16:24:10.156647 - 2023-05-11 18:48:09.173084 2026-03-06 04:16:16,400 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/11/CAL/solo_CAL_stix-cal-energy_20230511T162410-20230511T184809_V02.fits 2026-03-06 04:16:16,841 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b8cdxxm3 2026-03-06 04:16:16,842 Read config from in: /tmp/ecc_context_ecc_cfg_1_b8cdxxm3/post_ecc.ini 2026-03-06 04:16:18,078 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b8cdxxm3/solo_L1_stix-cal-energy_20230526_V03_ecc_in.fits 2026-03-06 04:25:07,435 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230526_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230526_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230526_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230526_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 04:25:13,995 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 04:25:14,002 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b8cdxxm3 2026-03-06 04:25:14,027 No soops found for time: 2023-05-26 18:06:03.442404 - 2023-05-26 20:30:03.457635 2026-03-06 04:25:14,120 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/26/CAL/solo_CAL_stix-cal-energy_20230526T180603-20230526T203003_V02.fits 2026-03-06 04:25:14,284 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2xovmumv 2026-03-06 04:25:14,285 Read config from in: /tmp/ecc_context_ecc_cfg_1_2xovmumv/post_ecc.ini 2026-03-06 04:25:15,538 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2xovmumv/solo_L1_stix-cal-energy_20230519_V03_ecc_in.fits 2026-03-06 04:34:09,223 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230519_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230519_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230519_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230519_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 04:34:15,396 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 04:34:15,403 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2xovmumv 2026-03-06 04:34:15,429 No soops found for time: 2023-05-19 17:20:44.374275 - 2023-05-19 19:44:44.389427 2026-03-06 04:34:15,522 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/19/CAL/solo_CAL_stix-cal-energy_20230519T172044-20230519T194444_V02.fits 2026-03-06 04:34:15,912 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nlq2vs6v 2026-03-06 04:34:15,913 Read config from in: /tmp/ecc_context_ecc_cfg_1_nlq2vs6v/post_ecc.ini 2026-03-06 04:34:17,158 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nlq2vs6v/solo_L1_stix-cal-energy_20230522_V03_ecc_in.fits 2026-03-06 04:43:03,477 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230522_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230522_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230522_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230522_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 04:43:11,084 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 04:43:11,091 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nlq2vs6v 2026-03-06 04:43:11,116 No soops found for time: 2023-05-22 18:05:39.833557 - 2023-05-22 20:29:39.848709 2026-03-06 04:43:11,210 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/22/CAL/solo_CAL_stix-cal-energy_20230522T180539-20230522T202939_V02.fits 2026-03-06 04:43:11,364 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mt0_pxac 2026-03-06 04:43:11,365 Read config from in: /tmp/ecc_context_ecc_cfg_1_mt0_pxac/post_ecc.ini 2026-03-06 04:43:12,597 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mt0_pxac/solo_L1_stix-cal-energy_20230525_V03_ecc_in.fits 2026-03-06 04:51:59,690 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230525_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230525_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230525_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230525_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 04:52:05,883 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 04:52:05,891 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mt0_pxac 2026-03-06 04:52:05,917 No soops found for time: 2023-05-25 18:05:58.290087 - 2023-05-25 20:29:57.305316 2026-03-06 04:52:06,010 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/25/CAL/solo_CAL_stix-cal-energy_20230525T180558-20230525T202957_V02.fits 2026-03-06 04:52:06,172 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mocipnzh 2026-03-06 04:52:06,172 Read config from in: /tmp/ecc_context_ecc_cfg_1_mocipnzh/post_ecc.ini 2026-03-06 04:52:07,420 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mocipnzh/solo_L1_stix-cal-energy_20230528_V03_ecc_in.fits 2026-03-06 05:01:10,005 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230528_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230528_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230528_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230528_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 05:01:16,221 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 05:01:16,227 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mocipnzh 2026-03-06 05:01:16,253 No soops found for time: 2023-05-28 18:06:15.745411 - 2023-05-28 20:36:03.761183 2026-03-06 05:01:16,345 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/28/CAL/solo_CAL_stix-cal-energy_20230528T180615-20230528T203603_V02.fits 2026-03-06 05:01:16,504 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lxxsi89p 2026-03-06 05:01:16,504 Read config from in: /tmp/ecc_context_ecc_cfg_1_lxxsi89p/post_ecc.ini 2026-03-06 05:01:17,751 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lxxsi89p/solo_L1_stix-cal-energy_20230509_V03_ecc_in.fits 2026-03-06 05:09:50,257 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230509_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230509_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230509_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230509_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 05:09:56,425 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 05:09:56,432 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lxxsi89p 2026-03-06 05:09:56,458 No soops found for time: 2023-05-09 16:23:57.855697 - 2023-05-09 18:47:57.870356 2026-03-06 05:09:56,559 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/09/CAL/solo_CAL_stix-cal-energy_20230509T162357-20230509T184757_V02.fits 2026-03-06 05:09:56,715 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8840pgn0 2026-03-06 05:09:56,717 Read config from in: /tmp/ecc_context_ecc_cfg_1_8840pgn0/post_ecc.ini 2026-03-06 05:09:57,970 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8840pgn0/solo_L1_stix-cal-energy_20230529_V03_ecc_in.fits 2026-03-06 05:18:50,328 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230529_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230529_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230529_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230529_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 05:18:56,467 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 05:18:56,474 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8840pgn0 2026-03-06 05:18:56,499 No soops found for time: 2023-05-29 19:44:14.907341 - 2023-05-29 22:08:14.922503 2026-03-06 05:18:56,592 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/29/CAL/solo_CAL_stix-cal-energy_20230529T194414-20230529T220814_V02.fits 2026-03-06 05:18:56,749 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x45410n7 2026-03-06 05:18:56,750 Read config from in: /tmp/ecc_context_ecc_cfg_1_x45410n7/post_ecc.ini 2026-03-06 05:18:57,993 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x45410n7/solo_L1_stix-cal-energy_20230502_V03_ecc_in.fits 2026-03-06 05:28:03,987 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230502_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230502_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230502_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230502_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 05:28:11,622 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-06 05:28:11,629 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x45410n7 2026-03-06 05:28:11,656 No soops found for time: 2023-05-02 00:23:06.716778 - 2023-05-02 02:48:20.732199 2026-03-06 05:28:11,750 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/02/CAL/solo_CAL_stix-cal-energy_20230502T002306-20230502T024820_V02.fits 2026-03-06 05:28:11,913 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ri1tdiyc 2026-03-06 05:28:11,914 Read config from in: /tmp/ecc_context_ecc_cfg_1_ri1tdiyc/post_ecc.ini 2026-03-06 05:28:13,178 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ri1tdiyc/solo_L1_stix-cal-energy_20230513_V03_ecc_in.fits 2026-03-06 05:36:43,690 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230513_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230513_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230513_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230513_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 05:36:49,813 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 05:36:49,820 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ri1tdiyc 2026-03-06 05:36:49,845 No soops found for time: 2023-05-13 16:24:21.461148 - 2023-05-13 18:48:21.476308 2026-03-06 05:36:49,940 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/13/CAL/solo_CAL_stix-cal-energy_20230513T162421-20230513T184821_V02.fits 2026-03-06 05:36:50,399 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8yp5thxp 2026-03-06 05:36:50,400 Read config from in: /tmp/ecc_context_ecc_cfg_1_8yp5thxp/post_ecc.ini 2026-03-06 05:36:51,639 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8yp5thxp/solo_L1_stix-cal-energy_20230515_V03_ecc_in.fits 2026-03-06 05:45:38,533 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230515_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230515_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230515_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230515_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 05:45:44,608 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 05:45:44,615 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8yp5thxp 2026-03-06 05:45:44,639 No soops found for time: 2023-05-15 17:20:14.767214 - 2023-05-15 19:44:13.782271 2026-03-06 05:45:44,732 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/05/15/CAL/solo_CAL_stix-cal-energy_20230515T172014-20230515T194413_V02.fits 2026-03-06 05:45:44,881 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20230612.csv 2026-03-06 05:45:44,913 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0aqzptza 2026-03-06 05:45:44,914 Read config from in: /tmp/ecc_context_ecc_cfg_1_0aqzptza/post_ecc.ini 2026-03-06 05:45:46,170 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0aqzptza/solo_L1_stix-cal-energy_20230730_V03_ecc_in.fits 2026-03-06 05:55:12,864 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230730_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230730_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230730_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230730_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 05:55:19,038 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 05:55:19,045 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0aqzptza 2026-03-06 05:55:19,069 No soops found for time: 2023-07-30 08:49:26.194809 - 2023-07-30 10:20:29.204389 2026-03-06 05:55:19,167 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/30/CAL/solo_CAL_stix-cal-energy_20230730T084926-20230730T102029_V02.fits 2026-03-06 05:55:19,333 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__64k0qve 2026-03-06 05:55:19,334 Read config from in: /tmp/ecc_context_ecc_cfg_1__64k0qve/post_ecc.ini 2026-03-06 05:55:20,573 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__64k0qve/solo_L1_stix-cal-energy_20230710_V03_ecc_in.fits 2026-03-06 06:06:17,893 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230710_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230710_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230710_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230710_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 06:06:24,580 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 06:06:24,589 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__64k0qve 2026-03-06 06:06:24,617 No soops found for time: 2023-07-10 00:22:01.116611 - 2023-07-10 02:46:01.131655 2026-03-06 06:06:24,723 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/10/CAL/solo_CAL_stix-cal-energy_20230710T002201-20230710T024601_V02.fits 2026-03-06 06:06:24,875 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20230606.csv 2026-03-06 06:06:24,910 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_40f_w9wa 2026-03-06 06:06:24,911 Read config from in: /tmp/ecc_context_ecc_cfg_1_40f_w9wa/post_ecc.ini 2026-03-06 06:06:26,253 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_40f_w9wa/solo_L1_stix-cal-energy_20230701_V03_ecc_in.fits 2026-03-06 06:18:28,209 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230701_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230701_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230701_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230701_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 06:18:34,355 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 06:18:34,362 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_40f_w9wa 2026-03-06 06:18:34,388 No soops found for time: 2023-07-01 01:02:55.767324 - 2023-07-01 03:26:55.782377 2026-03-06 06:18:34,483 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/01/CAL/solo_CAL_stix-cal-energy_20230701T010255-20230701T032655_V02.fits 2026-03-06 06:18:34,641 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uykh2wuh 2026-03-06 06:18:34,641 Read config from in: /tmp/ecc_context_ecc_cfg_1_uykh2wuh/post_ecc.ini 2026-03-06 06:18:37,345 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uykh2wuh/solo_L1_stix-cal-energy_20230724_V03_ecc_in.fits 2026-03-06 06:29:08,445 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230724_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230724_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230724_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230724_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 06:29:14,728 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-06 06:29:14,730 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-06 06:29:14,735 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uykh2wuh 2026-03-06 06:29:14,759 No soops found for time: 2023-07-24 03:35:24.252695 - 2023-07-24 06:29:56.271059 2026-03-06 06:29:14,859 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/24/CAL/solo_CAL_stix-cal-energy_20230724T033524-20230724T062956_V02.fits 2026-03-06 06:29:15,018 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9yt5qf50 2026-03-06 06:29:15,019 Read config from in: /tmp/ecc_context_ecc_cfg_1_9yt5qf50/post_ecc.ini 2026-03-06 06:29:16,266 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9yt5qf50/solo_L1_stix-cal-energy_20230708_V03_ecc_in.fits 2026-03-06 06:38:48,960 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230708_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230708_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230708_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230708_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 06:38:55,065 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 06:38:55,072 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9yt5qf50 2026-03-06 06:38:55,096 No soops found for time: 2023-07-08 01:29:42.822800 - 2023-07-08 03:53:41.837842 2026-03-06 06:38:55,190 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/08/CAL/solo_CAL_stix-cal-energy_20230708T012942-20230708T035341_V02.fits 2026-03-06 06:38:55,631 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e8glfwfy 2026-03-06 06:38:55,631 Read config from in: /tmp/ecc_context_ecc_cfg_1_e8glfwfy/post_ecc.ini 2026-03-06 06:38:56,874 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e8glfwfy/solo_L1_stix-cal-energy_20230705_V03_ecc_in.fits 2026-03-06 06:48:31,885 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230705_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230705_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230705_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230705_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 06:48:38,689 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 06:48:38,696 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e8glfwfy 2026-03-06 06:48:38,723 No soops found for time: 2023-07-05 00:15:17.364475 - 2023-07-05 02:39:17.379528 2026-03-06 06:48:38,827 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/05/CAL/solo_CAL_stix-cal-energy_20230705T001517-20230705T023917_V02.fits 2026-03-06 06:48:38,994 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w0_bg7u_ 2026-03-06 06:48:38,994 Read config from in: /tmp/ecc_context_ecc_cfg_1_w0_bg7u_/post_ecc.ini 2026-03-06 06:48:40,258 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w0_bg7u_/solo_L1_stix-cal-energy_20230714_V03_ecc_in.fits 2026-03-06 06:58:01,641 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230714_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230714_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230714_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230714_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 06:58:07,886 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 06:58:07,893 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w0_bg7u_ 2026-03-06 06:58:07,917 No soops found for time: 2023-07-14 00:43:49.722174 - 2023-07-14 03:07:55.737284 2026-03-06 06:58:08,014 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/14/CAL/solo_CAL_stix-cal-energy_20230714T004349-20230714T030755_V02.fits 2026-03-06 06:58:08,177 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y1cz938u 2026-03-06 06:58:08,177 Read config from in: /tmp/ecc_context_ecc_cfg_1_y1cz938u/post_ecc.ini 2026-03-06 06:58:09,433 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y1cz938u/solo_L1_stix-cal-energy_20230707_V03_ecc_in.fits 2026-03-06 07:07:38,701 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230707_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230707_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230707_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230707_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 07:07:44,815 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 07:07:44,826 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y1cz938u 2026-03-06 07:07:44,851 No soops found for time: 2023-07-07 00:15:29.665562 - 2023-07-07 02:44:48.681171 2026-03-06 07:07:44,945 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/07/CAL/solo_CAL_stix-cal-energy_20230707T001529-20230707T024448_V02.fits 2026-03-06 07:07:45,103 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kx8gqrmf 2026-03-06 07:07:45,103 Read config from in: /tmp/ecc_context_ecc_cfg_1_kx8gqrmf/post_ecc.ini 2026-03-06 07:07:46,350 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kx8gqrmf/solo_L1_stix-cal-energy_20230720_V03_ecc_in.fits 2026-03-06 07:17:18,341 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230720_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230720_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230720_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230720_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 07:17:25,835 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 07:17:25,841 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kx8gqrmf 2026-03-06 07:17:25,864 No soops found for time: 2023-07-20 02:36:37.639973 - 2023-07-20 05:00:36.655071 2026-03-06 07:17:25,961 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/20/CAL/solo_CAL_stix-cal-energy_20230720T023637-20230720T050036_V02.fits 2026-03-06 07:17:26,115 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dxgkoywn 2026-03-06 07:17:26,116 Read config from in: /tmp/ecc_context_ecc_cfg_1_dxgkoywn/post_ecc.ini 2026-03-06 07:17:27,340 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dxgkoywn/solo_L1_stix-cal-energy_20230706_V03_ecc_in.fits 2026-03-06 07:27:01,907 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230706_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230706_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230706_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230706_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 07:27:08,038 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 07:27:08,045 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dxgkoywn 2026-03-06 07:27:08,069 No soops found for time: 2023-07-06 00:15:23.515018 - 2023-07-06 02:39:23.530072 2026-03-06 07:27:08,168 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/06/CAL/solo_CAL_stix-cal-energy_20230706T001523-20230706T023923_V02.fits 2026-03-06 07:27:08,328 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vym7_coh 2026-03-06 07:27:08,329 Read config from in: /tmp/ecc_context_ecc_cfg_1_vym7_coh/post_ecc.ini 2026-03-06 07:27:09,566 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vym7_coh/solo_L1_stix-cal-energy_20230703_V03_ecc_in.fits 2026-03-06 07:36:36,069 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230703_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230703_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230703_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230703_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 07:36:42,199 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 07:36:42,206 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vym7_coh 2026-03-06 07:36:42,230 No soops found for time: 2023-07-03 00:06:53.062531 - 2023-07-03 02:30:52.077582 2026-03-06 07:36:42,323 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/03/CAL/solo_CAL_stix-cal-energy_20230703T000653-20230703T023052_V02.fits 2026-03-06 07:36:42,478 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rdaxi0li 2026-03-06 07:36:42,479 Read config from in: /tmp/ecc_context_ecc_cfg_1_rdaxi0li/post_ecc.ini 2026-03-06 07:36:43,728 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rdaxi0li/solo_L1_stix-cal-energy_20230717_V03_ecc_in.fits 2026-03-06 07:46:02,286 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230717_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230717_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230717_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230717_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 07:46:08,398 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 07:46:08,404 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rdaxi0li 2026-03-06 07:46:08,428 No soops found for time: 2023-07-17 00:59:45.176829 - 2023-07-17 03:24:44.192032 2026-03-06 07:46:08,521 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/17/CAL/solo_CAL_stix-cal-energy_20230717T005945-20230717T032444_V02.fits 2026-03-06 07:46:08,678 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_atmar5ru 2026-03-06 07:46:08,679 Read config from in: /tmp/ecc_context_ecc_cfg_1_atmar5ru/post_ecc.ini 2026-03-06 07:46:09,923 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_atmar5ru/solo_L1_stix-cal-energy_20230731_V03_ecc_in.fits 2026-03-06 07:55:42,339 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230731_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230731_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230731_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230731_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 07:55:48,608 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 07:55:48,616 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_atmar5ru 2026-03-06 07:55:48,640 No soops found for time: 2023-07-31 00:07:59.291456 - 2023-07-31 02:34:33.306878 2026-03-06 07:55:48,735 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/31/CAL/solo_CAL_stix-cal-energy_20230731T000759-20230731T023433_V02.fits 2026-03-06 07:55:48,896 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fp_thalj 2026-03-06 07:55:48,897 Read config from in: /tmp/ecc_context_ecc_cfg_1_fp_thalj/post_ecc.ini 2026-03-06 07:55:50,142 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fp_thalj/solo_L1_stix-cal-energy_20230718_V03_ecc_in.fits 2026-03-06 08:05:11,517 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230718_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230718_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230718_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230718_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 08:05:17,635 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 08:05:17,642 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fp_thalj 2026-03-06 08:05:17,666 No soops found for time: 2023-07-18 01:09:59.328898 - 2023-07-18 03:39:09.344539 2026-03-06 08:05:17,759 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/18/CAL/solo_CAL_stix-cal-energy_20230718T010959-20230718T033909_V02.fits 2026-03-06 08:05:17,928 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9dkw5hbs 2026-03-06 08:05:17,928 Read config from in: /tmp/ecc_context_ecc_cfg_1_9dkw5hbs/post_ecc.ini 2026-03-06 08:05:20,554 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9dkw5hbs/solo_L1_stix-cal-energy_20230723_V03_ecc_in.fits 2026-03-06 08:14:43,346 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230723_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230723_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230723_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230723_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 08:14:49,496 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 08:14:49,505 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9dkw5hbs 2026-03-06 08:14:49,536 No soops found for time: 2023-07-23 02:37:00.095038 - 2023-07-23 05:04:30.110557 2026-03-06 08:14:49,637 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/23/CAL/solo_CAL_stix-cal-energy_20230723T023700-20230723T050430_V02.fits 2026-03-06 08:14:49,812 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lu6npf2g 2026-03-06 08:14:49,812 Read config from in: /tmp/ecc_context_ecc_cfg_1_lu6npf2g/post_ecc.ini 2026-03-06 08:14:51,049 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lu6npf2g/solo_L1_stix-cal-energy_20230716_V03_ecc_in.fits 2026-03-06 08:24:00,306 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230716_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230716_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230716_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230716_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 08:24:06,603 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 08:24:06,610 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lu6npf2g 2026-03-06 08:24:06,634 No soops found for time: 2023-07-16 00:50:54.024906 - 2023-07-16 03:15:45.040094 2026-03-06 08:24:06,727 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/16/CAL/solo_CAL_stix-cal-energy_20230716T005054-20230716T031545_V02.fits 2026-03-06 08:24:06,885 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vh5h_ggb 2026-03-06 08:24:06,885 Read config from in: /tmp/ecc_context_ecc_cfg_1_vh5h_ggb/post_ecc.ini 2026-03-06 08:24:08,135 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vh5h_ggb/solo_L1_stix-cal-energy_20230721_V03_ecc_in.fits 2026-03-06 08:33:27,862 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230721_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230721_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230721_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230721_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 08:33:34,020 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 08:33:34,026 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vh5h_ggb 2026-03-06 08:33:34,050 No soops found for time: 2023-07-21 02:36:47.790986 - 2023-07-21 05:00:47.806086 2026-03-06 08:33:34,144 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/21/CAL/solo_CAL_stix-cal-energy_20230721T023647-20230721T050047_V02.fits 2026-03-06 08:33:34,297 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_63i83_s3 2026-03-06 08:33:34,298 Read config from in: /tmp/ecc_context_ecc_cfg_1_63i83_s3/post_ecc.ini 2026-03-06 08:33:35,527 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_63i83_s3/solo_L1_stix-cal-energy_20230712_V03_ecc_in.fits 2026-03-06 08:42:52,877 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230712_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230712_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230712_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230712_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 08:42:59,063 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 08:42:59,070 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_63i83_s3 2026-03-06 08:42:59,095 No soops found for time: 2023-07-12 00:43:38.419754 - 2023-07-12 03:07:37.434796 2026-03-06 08:42:59,189 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/12/CAL/solo_CAL_stix-cal-energy_20230712T004338-20230712T030737_V02.fits 2026-03-06 08:42:59,350 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pfl_5lgj 2026-03-06 08:42:59,351 Read config from in: /tmp/ecc_context_ecc_cfg_1_pfl_5lgj/post_ecc.ini 2026-03-06 08:43:00,608 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pfl_5lgj/solo_L1_stix-cal-energy_20230727_V03_ecc_in.fits 2026-03-06 08:52:17,260 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230727_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230727_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230727_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230727_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 08:52:23,384 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 08:52:23,391 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pfl_5lgj 2026-03-06 08:52:23,415 No soops found for time: 2023-07-27 08:45:19.739841 - 2023-07-27 11:09:18.754990 2026-03-06 08:52:23,508 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/27/CAL/solo_CAL_stix-cal-energy_20230727T084519-20230727T110918_V02.fits 2026-03-06 08:52:23,936 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m6ydqo8p 2026-03-06 08:52:23,936 Read config from in: /tmp/ecc_context_ecc_cfg_1_m6ydqo8p/post_ecc.ini 2026-03-06 08:52:25,181 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m6ydqo8p/solo_L1_stix-cal-energy_20230711_V03_ecc_in.fits 2026-03-06 09:01:34,806 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230711_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230711_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230711_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230711_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 09:01:43,064 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 09:01:43,071 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m6ydqo8p 2026-03-06 09:01:43,097 No soops found for time: 2023-07-11 00:22:08.267066 - 2023-07-11 02:48:13.282327 2026-03-06 09:01:43,196 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/11/CAL/solo_CAL_stix-cal-energy_20230711T002208-20230711T024813_V02.fits 2026-03-06 09:01:43,361 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oh725rcw 2026-03-06 09:01:43,362 Read config from in: /tmp/ecc_context_ecc_cfg_1_oh725rcw/post_ecc.ini 2026-03-06 09:01:44,629 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oh725rcw/solo_L1_stix-cal-energy_20230726_V03_ecc_in.fits 2026-03-06 09:11:12,888 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230726_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230726_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230726_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230726_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 09:11:19,657 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 09:11:19,664 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oh725rcw 2026-03-06 09:11:19,690 No soops found for time: 2023-07-26 08:45:13.588318 - 2023-07-26 11:09:13.603469 2026-03-06 09:11:19,790 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/26/CAL/solo_CAL_stix-cal-energy_20230726T084513-20230726T110913_V02.fits 2026-03-06 09:11:19,954 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s8esihiq 2026-03-06 09:11:19,955 Read config from in: /tmp/ecc_context_ecc_cfg_1_s8esihiq/post_ecc.ini 2026-03-06 09:11:21,217 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s8esihiq/solo_L1_stix-cal-energy_20230719_V03_ecc_in.fits 2026-03-06 09:20:49,790 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230719_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230719_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230719_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230719_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 09:20:55,980 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 09:20:55,986 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s8esihiq 2026-03-06 09:20:56,010 No soops found for time: 2023-07-19 02:36:31.488967 - 2023-07-19 05:00:30.504065 2026-03-06 09:20:56,104 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/19/CAL/solo_CAL_stix-cal-energy_20230719T023631-20230719T050030_V02.fits 2026-03-06 09:20:56,275 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_16dylx5d 2026-03-06 09:20:56,276 Read config from in: /tmp/ecc_context_ecc_cfg_1_16dylx5d/post_ecc.ini 2026-03-06 09:20:57,533 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_16dylx5d/solo_L1_stix-cal-energy_20230722_V03_ecc_in.fits 2026-03-06 09:30:23,321 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230722_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230722_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230722_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230722_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 09:30:29,454 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 09:30:29,460 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_16dylx5d 2026-03-06 09:30:29,485 No soops found for time: 2023-07-22 02:36:53.943515 - 2023-07-22 05:00:52.958665 2026-03-06 09:30:29,579 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/22/CAL/solo_CAL_stix-cal-energy_20230722T023653-20230722T050052_V02.fits 2026-03-06 09:30:29,740 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gk9_fep6 2026-03-06 09:30:29,740 Read config from in: /tmp/ecc_context_ecc_cfg_1_gk9_fep6/post_ecc.ini 2026-03-06 09:30:30,978 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gk9_fep6/solo_L1_stix-cal-energy_20230725_V03_ecc_in.fits 2026-03-06 09:41:00,879 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230725_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230725_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230725_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230725_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 09:41:07,111 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 09:41:07,118 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gk9_fep6 2026-03-06 09:41:07,141 No soops found for time: 2023-07-25 08:40:54.436351 - 2023-07-25 11:05:19.451546 2026-03-06 09:41:07,238 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/25/CAL/solo_CAL_stix-cal-energy_20230725T084054-20230725T110519_V02.fits 2026-03-06 09:41:07,399 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0iuygpvy 2026-03-06 09:41:07,400 Read config from in: /tmp/ecc_context_ecc_cfg_1_0iuygpvy/post_ecc.ini 2026-03-06 09:41:08,644 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0iuygpvy/solo_L1_stix-cal-energy_20230728_V03_ecc_in.fits 2026-03-06 09:50:35,700 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230728_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230728_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230728_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230728_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 09:50:41,872 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 09:50:41,878 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0iuygpvy 2026-03-06 09:50:41,902 No soops found for time: 2023-07-28 08:45:25.891364 - 2023-07-28 11:09:44.906548 2026-03-06 09:50:41,998 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/28/CAL/solo_CAL_stix-cal-energy_20230728T084525-20230728T110944_V02.fits 2026-03-06 09:50:42,173 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xxex0xdu 2026-03-06 09:50:42,174 Read config from in: /tmp/ecc_context_ecc_cfg_1_xxex0xdu/post_ecc.ini 2026-03-06 09:50:43,429 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xxex0xdu/solo_L1_stix-cal-energy_20230709_V03_ecc_in.fits 2026-03-06 10:00:02,447 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230709_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230709_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230709_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230709_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 10:00:10,076 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 10:00:10,083 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xxex0xdu 2026-03-06 10:00:10,107 No soops found for time: 2023-07-09 01:29:47.973251 - 2023-07-09 03:44:48.987356 2026-03-06 10:00:10,206 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/09/CAL/solo_CAL_stix-cal-energy_20230709T012947-20230709T034448_V02.fits 2026-03-06 10:00:10,364 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j0c75rfr 2026-03-06 10:00:10,364 Read config from in: /tmp/ecc_context_ecc_cfg_1_j0c75rfr/post_ecc.ini 2026-03-06 10:00:11,614 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j0c75rfr/solo_L1_stix-cal-energy_20230729_V03_ecc_in.fits 2026-03-06 10:09:41,655 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230729_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230729_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230729_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230729_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 10:09:47,787 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 10:09:47,795 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j0c75rfr 2026-03-06 10:09:47,818 No soops found for time: 2023-07-29 08:49:20.043286 - 2023-07-29 11:13:19.058436 2026-03-06 10:09:47,913 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/29/CAL/solo_CAL_stix-cal-energy_20230729T084920-20230729T111319_V02.fits 2026-03-06 10:09:48,074 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zhz54xj0 2026-03-06 10:09:48,074 Read config from in: /tmp/ecc_context_ecc_cfg_1_zhz54xj0/post_ecc.ini 2026-03-06 10:09:49,314 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zhz54xj0/solo_L1_stix-cal-energy_20230702_V03_ecc_in.fits 2026-03-06 10:18:34,505 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230702_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230702_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230702_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230702_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 10:18:40,585 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 10:18:40,592 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zhz54xj0 2026-03-06 10:18:40,616 No soops found for time: 2023-07-02 01:03:01.917867 - 2023-07-02 03:20:43.932262 2026-03-06 10:18:40,711 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/02/CAL/solo_CAL_stix-cal-energy_20230702T010301-20230702T032043_V02.fits 2026-03-06 10:18:41,151 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_47f3_nhg 2026-03-06 10:18:41,152 Read config from in: /tmp/ecc_context_ecc_cfg_1_47f3_nhg/post_ecc.ini 2026-03-06 10:18:42,397 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_47f3_nhg/solo_L1_stix-cal-energy_20230713_V03_ecc_in.fits 2026-03-06 10:28:04,550 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230713_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230713_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230713_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230713_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 10:28:10,737 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 10:28:10,744 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_47f3_nhg 2026-03-06 10:28:10,770 No soops found for time: 2023-07-13 00:43:43.570205 - 2023-07-13 03:07:43.585249 2026-03-06 10:28:10,866 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/13/CAL/solo_CAL_stix-cal-energy_20230713T004343-20230713T030743_V02.fits 2026-03-06 10:28:11,026 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ckfr5far 2026-03-06 10:28:11,026 Read config from in: /tmp/ecc_context_ecc_cfg_1_ckfr5far/post_ecc.ini 2026-03-06 10:28:12,293 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ckfr5far/solo_L1_stix-cal-energy_20230715_V03_ecc_in.fits 2026-03-06 10:37:39,940 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230715_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230715_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230715_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230715_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 10:37:46,915 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 10:37:46,922 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ckfr5far 2026-03-06 10:37:46,950 No soops found for time: 2023-07-15 00:50:45.873896 - 2023-07-15 03:14:45.888996 2026-03-06 10:37:47,052 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/15/CAL/solo_CAL_stix-cal-energy_20230715T005045-20230715T031445_V02.fits 2026-03-06 10:37:47,488 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6cvjoix7 2026-03-06 10:37:47,489 Read config from in: /tmp/ecc_context_ecc_cfg_1_6cvjoix7/post_ecc.ini 2026-03-06 10:37:48,766 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6cvjoix7/solo_L1_stix-cal-energy_20230704_V03_ecc_in.fits 2026-03-06 10:47:08,747 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230704_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230704_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230704_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230704_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 10:47:14,929 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 10:47:14,936 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6cvjoix7 2026-03-06 10:47:14,961 No soops found for time: 2023-07-04 00:06:59.213074 - 2023-07-04 02:31:29.228180 2026-03-06 10:47:15,054 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/07/04/CAL/solo_CAL_stix-cal-energy_20230704T000659-20230704T023129_V02.fits 2026-03-06 10:47:15,212 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sn1my1iz 2026-03-06 10:47:15,213 Read config from in: /tmp/ecc_context_ecc_cfg_1_sn1my1iz/post_ecc.ini 2026-03-06 10:47:17,760 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sn1my1iz/solo_L1_stix-cal-energy_20230630_V03_ecc_in.fits 2026-03-06 10:55:59,008 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230630_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230630_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230630_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230630_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 10:56:05,506 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 10:56:05,513 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sn1my1iz 2026-03-06 10:56:05,538 No soops found for time: 2023-06-30 01:02:50.616782 - 2023-06-30 03:26:49.631834 2026-03-06 10:56:05,637 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/30/CAL/solo_CAL_stix-cal-energy_20230630T010250-20230630T032649_V02.fits 2026-03-06 10:56:05,796 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qswj0f4d 2026-03-06 10:56:05,796 Read config from in: /tmp/ecc_context_ecc_cfg_1_qswj0f4d/post_ecc.ini 2026-03-06 10:56:07,029 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qswj0f4d/solo_L1_stix-cal-energy_20230610_V03_ecc_in.fits 2026-03-06 11:04:54,282 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230610_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230610_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230610_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230610_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 11:05:00,395 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 11:05:00,401 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qswj0f4d 2026-03-06 11:05:00,426 No soops found for time: 2023-06-10 00:30:31.600143 - 2023-06-10 02:54:31.615245 2026-03-06 11:05:00,525 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/10/CAL/solo_CAL_stix-cal-energy_20230610T003031-20230610T025431_V02.fits 2026-03-06 11:05:00,998 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ja677bgm 2026-03-06 11:05:00,999 Read config from in: /tmp/ecc_context_ecc_cfg_1_ja677bgm/post_ecc.ini 2026-03-06 11:05:02,254 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ja677bgm/solo_L1_stix-cal-energy_20230601_V03_ecc_in.fits 2026-03-06 11:14:06,035 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230601_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230601_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230601_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230601_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 11:14:12,598 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 11:14:12,606 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ja677bgm 2026-03-06 11:14:12,633 No soops found for time: 2023-06-01 19:44:33.362215 - 2023-06-01 22:08:33.377376 2026-03-06 11:14:12,731 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/01/CAL/solo_CAL_stix-cal-energy_20230601T194433-20230601T220833_V02.fits 2026-03-06 11:14:12,894 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kbwg8r3p 2026-03-06 11:14:12,895 Read config from in: /tmp/ecc_context_ecc_cfg_1_kbwg8r3p/post_ecc.ini 2026-03-06 11:14:14,163 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kbwg8r3p/solo_L1_stix-cal-energy_20230624_V03_ecc_in.fits 2026-03-06 11:23:04,300 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230624_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230624_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230624_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230624_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 11:23:10,479 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 11:23:10,486 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kbwg8r3p 2026-03-06 11:23:10,512 No soops found for time: 2023-06-24 00:15:32.708641 - 2023-06-24 02:39:31.723692 2026-03-06 11:23:10,613 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/24/CAL/solo_CAL_stix-cal-energy_20230624T001532-20230624T023931_V02.fits 2026-03-06 11:23:11,014 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_67qnwl6q 2026-03-06 11:23:11,015 Read config from in: /tmp/ecc_context_ecc_cfg_1_67qnwl6q/post_ecc.ini 2026-03-06 11:23:12,284 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_67qnwl6q/solo_L1_stix-cal-energy_20230608_V03_ecc_in.fits 2026-03-06 11:32:05,452 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230608_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230608_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230608_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230608_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 11:32:11,871 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 11:32:11,885 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_67qnwl6q 2026-03-06 11:32:11,915 No soops found for time: 2023-06-08 00:30:19.298072 - 2023-06-08 02:54:18.313172 2026-03-06 11:32:12,016 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/08/CAL/solo_CAL_stix-cal-energy_20230608T003019-20230608T025418_V02.fits 2026-03-06 11:32:12,457 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2_qnox_r 2026-03-06 11:32:12,458 Read config from in: /tmp/ecc_context_ecc_cfg_1_2_qnox_r/post_ecc.ini 2026-03-06 11:32:13,719 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2_qnox_r/solo_L1_stix-cal-energy_20230605_V03_ecc_in.fits 2026-03-06 11:41:12,029 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230605_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230605_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230605_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230605_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 11:41:18,232 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 11:41:18,240 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2_qnox_r 2026-03-06 11:41:18,267 No soops found for time: 2023-06-05 00:23:00.844231 - 2023-06-05 02:46:59.859331 2026-03-06 11:41:18,364 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/05/CAL/solo_CAL_stix-cal-energy_20230605T002300-20230605T024659_V02.fits 2026-03-06 11:41:18,523 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ao1nunqr 2026-03-06 11:41:18,524 Read config from in: /tmp/ecc_context_ecc_cfg_1_ao1nunqr/post_ecc.ini 2026-03-06 11:41:21,151 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ao1nunqr/solo_L1_stix-cal-energy_20230614_V03_ecc_in.fits 2026-03-06 11:50:15,239 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230614_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230614_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230614_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230614_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 11:50:21,408 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 11:50:21,419 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ao1nunqr 2026-03-06 11:50:21,446 No soops found for time: 2023-06-14 01:38:17.211349 - 2023-06-14 04:02:17.226451 2026-03-06 11:50:21,541 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/14/CAL/solo_CAL_stix-cal-energy_20230614T013817-20230614T040217_V02.fits 2026-03-06 11:50:21,698 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pp4ihw7y 2026-03-06 11:50:21,698 Read config from in: /tmp/ecc_context_ecc_cfg_1_pp4ihw7y/post_ecc.ini 2026-03-06 11:50:22,940 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pp4ihw7y/solo_L1_stix-cal-energy_20230607_V03_ecc_in.fits 2026-03-06 11:59:08,018 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230607_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230607_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230607_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230607_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 11:59:14,175 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 11:59:14,182 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pp4ihw7y 2026-03-06 11:59:14,208 No soops found for time: 2023-06-07 00:30:13.147036 - 2023-06-07 02:54:13.162139 2026-03-06 11:59:14,301 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/07/CAL/solo_CAL_stix-cal-energy_20230607T003013-20230607T025413_V02.fits 2026-03-06 11:59:14,464 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c_woigek 2026-03-06 11:59:14,464 Read config from in: /tmp/ecc_context_ecc_cfg_1_c_woigek/post_ecc.ini 2026-03-06 11:59:15,705 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c_woigek/solo_L1_stix-cal-energy_20230620_V03_ecc_in.fits 2026-03-06 12:08:26,673 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230620_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230620_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230620_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230620_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 12:08:32,879 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 12:08:32,886 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c_woigek 2026-03-06 12:08:32,911 No soops found for time: 2023-06-20 00:06:42.105585 - 2023-06-20 02:30:41.120636 2026-03-06 12:08:33,009 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/20/CAL/solo_CAL_stix-cal-energy_20230620T000642-20230620T023041_V02.fits 2026-03-06 12:08:33,160 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jup5i4_t 2026-03-06 12:08:33,161 Read config from in: /tmp/ecc_context_ecc_cfg_1_jup5i4_t/post_ecc.ini 2026-03-06 12:08:34,397 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jup5i4_t/solo_L1_stix-cal-energy_20230606_V03_ecc_in.fits 2026-03-06 12:17:17,216 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230606_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230606_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230606_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230606_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 12:17:23,292 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 12:17:23,299 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jup5i4_t 2026-03-06 12:17:23,325 No soops found for time: 2023-06-06 00:23:06.995266 - 2023-06-06 02:47:08.010371 2026-03-06 12:17:23,419 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/06/CAL/solo_CAL_stix-cal-energy_20230606T002306-20230606T024708_V02.fits 2026-03-06 12:17:23,574 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tret0yr6 2026-03-06 12:17:23,575 Read config from in: /tmp/ecc_context_ecc_cfg_1_tret0yr6/post_ecc.ini 2026-03-06 12:17:24,813 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tret0yr6/solo_L1_stix-cal-energy_20230603_V03_ecc_in.fits 2026-03-06 12:26:23,136 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230603_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230603_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230603_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230603_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 12:26:29,291 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 12:26:29,300 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tret0yr6 2026-03-06 12:26:29,326 No soops found for time: 2023-06-03 19:44:44.664021 - 2023-06-03 22:08:44.679124 2026-03-06 12:26:29,423 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/03/CAL/solo_CAL_stix-cal-energy_20230603T194444-20230603T220844_V02.fits 2026-03-06 12:26:29,581 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n66cgmu9 2026-03-06 12:26:29,581 Read config from in: /tmp/ecc_context_ecc_cfg_1_n66cgmu9/post_ecc.ini 2026-03-06 12:26:30,831 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n66cgmu9/solo_L1_stix-cal-energy_20230617_V03_ecc_in.fits 2026-03-06 12:35:09,301 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230617_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230617_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230617_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230617_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 12:35:16,915 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 12:35:16,922 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n66cgmu9 2026-03-06 12:35:16,947 No soops found for time: 2023-06-17 01:38:35.664455 - 2023-06-17 04:06:13.679939 2026-03-06 12:35:17,041 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/17/CAL/solo_CAL_stix-cal-energy_20230617T013835-20230617T040613_V02.fits 2026-03-06 12:35:17,205 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zr75d2eb 2026-03-06 12:35:17,206 Read config from in: /tmp/ecc_context_ecc_cfg_1_zr75d2eb/post_ecc.ini 2026-03-06 12:35:18,503 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zr75d2eb/solo_L1_stix-cal-energy_20230618_V03_ecc_in.fits 2026-03-06 12:44:13,865 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230618_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230618_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230618_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230618_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 12:44:20,032 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 12:44:20,039 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zr75d2eb 2026-03-06 12:44:20,065 No soops found for time: 2023-06-18 02:15:04.817940 - 2023-06-18 04:25:33.831580 2026-03-06 12:44:20,159 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/18/CAL/solo_CAL_stix-cal-energy_20230618T021504-20230618T042533_V02.fits 2026-03-06 12:44:20,317 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9astc8sw 2026-03-06 12:44:20,318 Read config from in: /tmp/ecc_context_ecc_cfg_1_9astc8sw/post_ecc.ini 2026-03-06 12:44:21,631 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9astc8sw/solo_L1_stix-cal-energy_20230623_V03_ecc_in.fits 2026-03-06 12:53:18,867 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230623_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230623_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 12:53:24,979 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 12:53:24,986 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9astc8sw 2026-03-06 12:53:25,010 No soops found for time: 2023-06-23 00:07:00.557215 - 2023-06-23 02:31:06.572279 2026-03-06 12:53:25,110 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/23/CAL/solo_CAL_stix-cal-energy_20230623T000700-20230623T023106_V02.fits 2026-03-06 12:53:25,266 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h2bh8oer 2026-03-06 12:53:25,267 Read config from in: /tmp/ecc_context_ecc_cfg_1_h2bh8oer/post_ecc.ini 2026-03-06 12:53:26,501 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h2bh8oer/solo_L1_stix-cal-energy_20230616_V03_ecc_in.fits 2026-03-06 13:02:15,537 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230616_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230616_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230616_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230616_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 13:02:21,767 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 13:02:21,774 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h2bh8oer 2026-03-06 13:02:21,799 No soops found for time: 2023-06-16 01:38:29.513420 - 2023-06-16 04:02:29.528522 2026-03-06 13:02:21,893 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/16/CAL/solo_CAL_stix-cal-energy_20230616T013829-20230616T040229_V02.fits 2026-03-06 13:02:22,046 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v6g340lg 2026-03-06 13:02:22,046 Read config from in: /tmp/ecc_context_ecc_cfg_1_v6g340lg/post_ecc.ini 2026-03-06 13:02:23,309 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v6g340lg/solo_L1_stix-cal-energy_20230621_V03_ecc_in.fits 2026-03-06 13:11:23,053 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230621_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230621_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230621_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230621_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 13:11:29,177 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 13:11:29,183 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v6g340lg 2026-03-06 13:11:29,208 No soops found for time: 2023-06-21 00:06:48.256128 - 2023-06-21 02:30:47.271180 2026-03-06 13:11:29,301 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/21/CAL/solo_CAL_stix-cal-energy_20230621T000648-20230621T023047_V02.fits 2026-03-06 13:11:29,459 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uifvwr3m 2026-03-06 13:11:29,459 Read config from in: /tmp/ecc_context_ecc_cfg_1_uifvwr3m/post_ecc.ini 2026-03-06 13:11:30,720 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uifvwr3m/solo_L1_stix-cal-energy_20230612_V03_ecc_in.fits 2026-03-06 13:20:19,971 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230612_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230612_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230612_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230612_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 13:20:26,176 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 13:20:26,182 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uifvwr3m 2026-03-06 13:20:26,208 No soops found for time: 2023-06-12 01:38:02.909274 - 2023-06-12 04:02:01.924375 2026-03-06 13:20:26,301 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/12/CAL/solo_CAL_stix-cal-energy_20230612T013802-20230612T040201_V02.fits 2026-03-06 13:20:26,760 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_113bv44m 2026-03-06 13:20:26,761 Read config from in: /tmp/ecc_context_ecc_cfg_1_113bv44m/post_ecc.ini 2026-03-06 13:20:29,378 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_113bv44m/solo_L1_stix-cal-energy_20230627_V03_ecc_in.fits 2026-03-06 13:29:23,528 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230627_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230627_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230627_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230627_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 13:29:29,719 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 13:29:29,726 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_113bv44m 2026-03-06 13:29:29,749 No soops found for time: 2023-06-27 00:57:06.164583 - 2023-06-27 03:21:11.179645 2026-03-06 13:29:29,846 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/27/CAL/solo_CAL_stix-cal-energy_20230627T005706-20230627T032111_V02.fits 2026-03-06 13:29:30,273 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_043b2l23 2026-03-06 13:29:30,273 Read config from in: /tmp/ecc_context_ecc_cfg_1_043b2l23/post_ecc.ini 2026-03-06 13:29:31,505 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_043b2l23/solo_L1_stix-cal-energy_20230611_V03_ecc_in.fits 2026-03-06 13:38:29,423 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230611_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230611_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230611_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230611_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 13:38:35,560 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 13:38:35,567 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_043b2l23 2026-03-06 13:38:35,592 No soops found for time: 2023-06-11 00:30:37.751178 - 2023-06-11 02:58:24.766678 2026-03-06 13:38:35,685 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/11/CAL/solo_CAL_stix-cal-energy_20230611T003037-20230611T025824_V02.fits 2026-03-06 13:38:36,083 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o9_bhgn1 2026-03-06 13:38:36,084 Read config from in: /tmp/ecc_context_ecc_cfg_1_o9_bhgn1/post_ecc.ini 2026-03-06 13:38:37,324 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o9_bhgn1/solo_L1_stix-cal-energy_20230626_V03_ecc_in.fits 2026-03-06 13:47:36,452 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230626_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230626_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230626_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230626_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 13:47:42,586 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 13:47:42,594 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o9_bhgn1 2026-03-06 13:47:42,618 No soops found for time: 2023-06-26 00:04:56.008597 - 2023-06-26 02:30:51.023851 2026-03-06 13:47:42,716 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/26/CAL/solo_CAL_stix-cal-energy_20230626T000456-20230626T023051_V02.fits 2026-03-06 13:47:42,877 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eb2g0dme 2026-03-06 13:47:42,877 Read config from in: /tmp/ecc_context_ecc_cfg_1_eb2g0dme/post_ecc.ini 2026-03-06 13:47:44,131 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eb2g0dme/solo_L1_stix-cal-energy_20230619_V03_ecc_in.fits 2026-03-06 13:56:30,678 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230619_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230619_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230619_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230619_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 13:56:36,847 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 13:56:36,854 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eb2g0dme 2026-03-06 13:56:36,879 No soops found for time: 2023-06-19 00:06:35.955041 - 2023-06-19 02:30:35.970095 2026-03-06 13:56:36,973 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/19/CAL/solo_CAL_stix-cal-energy_20230619T000635-20230619T023035_V02.fits 2026-03-06 13:56:37,129 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zx1rhgvh 2026-03-06 13:56:37,130 Read config from in: /tmp/ecc_context_ecc_cfg_1_zx1rhgvh/post_ecc.ini 2026-03-06 13:56:38,370 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zx1rhgvh/solo_L1_stix-cal-energy_20230622_V03_ecc_in.fits 2026-03-06 14:05:39,143 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230622_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230622_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230622_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230622_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 14:05:45,403 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 14:05:45,409 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zx1rhgvh 2026-03-06 14:05:45,432 No soops found for time: 2023-06-22 00:06:54.406672 - 2023-06-22 02:30:53.421723 2026-03-06 14:05:45,532 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/22/CAL/solo_CAL_stix-cal-energy_20230622T000654-20230622T023053_V02.fits 2026-03-06 14:05:45,685 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w68svtgv 2026-03-06 14:05:45,686 Read config from in: /tmp/ecc_context_ecc_cfg_1_w68svtgv/post_ecc.ini 2026-03-06 14:05:46,931 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w68svtgv/solo_L1_stix-cal-energy_20230625_V03_ecc_in.fits 2026-03-06 14:14:50,241 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230625_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230625_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230625_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230625_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 14:14:57,871 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 14:14:57,877 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w68svtgv 2026-03-06 14:14:57,901 No soops found for time: 2023-06-25 00:15:37.859182 - 2023-06-25 02:38:03.874072 2026-03-06 14:14:57,993 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/25/CAL/solo_CAL_stix-cal-energy_20230625T001537-20230625T023803_V02.fits 2026-03-06 14:14:58,149 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t9wywq17 2026-03-06 14:14:58,150 Read config from in: /tmp/ecc_context_ecc_cfg_1_t9wywq17/post_ecc.ini 2026-03-06 14:14:59,375 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t9wywq17/solo_L1_stix-cal-energy_20230628_V03_ecc_in.fits 2026-03-06 14:23:49,579 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230628_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230628_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230628_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230628_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 14:23:55,761 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 14:23:55,768 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t9wywq17 2026-03-06 14:23:55,792 No soops found for time: 2023-06-28 01:02:38.315695 - 2023-06-28 03:26:38.330748 2026-03-06 14:23:55,885 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/28/CAL/solo_CAL_stix-cal-energy_20230628T010238-20230628T032638_V02.fits 2026-03-06 14:23:56,057 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rqouojrq 2026-03-06 14:23:56,058 Read config from in: /tmp/ecc_context_ecc_cfg_1_rqouojrq/post_ecc.ini 2026-03-06 14:23:57,296 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rqouojrq/solo_L1_stix-cal-energy_20230609_V03_ecc_in.fits 2026-03-06 14:32:45,247 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230609_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230609_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230609_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230609_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 14:32:51,359 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 14:32:51,365 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rqouojrq 2026-03-06 14:32:51,392 No soops found for time: 2023-06-09 00:30:25.449107 - 2023-06-09 02:54:25.464210 2026-03-06 14:32:51,485 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/09/CAL/solo_CAL_stix-cal-energy_20230609T003025-20230609T025425_V02.fits 2026-03-06 14:32:51,648 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7utpt336 2026-03-06 14:32:51,649 Read config from in: /tmp/ecc_context_ecc_cfg_1_7utpt336/post_ecc.ini 2026-03-06 14:32:52,893 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7utpt336/solo_L1_stix-cal-energy_20230629_V03_ecc_in.fits 2026-03-06 14:41:53,231 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230629_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230629_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230629_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230629_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 14:41:59,380 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 14:41:59,386 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7utpt336 2026-03-06 14:41:59,411 No soops found for time: 2023-06-29 01:02:44.466238 - 2023-06-29 03:26:43.481290 2026-03-06 14:41:59,504 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/29/CAL/solo_CAL_stix-cal-energy_20230629T010244-20230629T032643_V02.fits 2026-03-06 14:41:59,666 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vm6h_eab 2026-03-06 14:41:59,666 Read config from in: /tmp/ecc_context_ecc_cfg_1_vm6h_eab/post_ecc.ini 2026-03-06 14:42:00,912 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vm6h_eab/solo_L1_stix-cal-energy_20230602_V03_ecc_in.fits 2026-03-06 14:50:37,896 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230602_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230602_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230602_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230602_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 14:50:44,030 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 14:50:44,040 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vm6h_eab 2026-03-06 14:50:44,068 No soops found for time: 2023-06-02 19:44:39.513839 - 2023-06-02 22:08:38.528999 2026-03-06 14:50:44,162 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/02/CAL/solo_CAL_stix-cal-energy_20230602T194439-20230602T220838_V02.fits 2026-03-06 14:50:44,321 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tfk2xuyb 2026-03-06 14:50:44,321 Read config from in: /tmp/ecc_context_ecc_cfg_1_tfk2xuyb/post_ecc.ini 2026-03-06 14:50:45,575 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tfk2xuyb/solo_L1_stix-cal-energy_20230613_V03_ecc_in.fits 2026-03-06 14:59:39,211 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230613_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230613_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230613_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230613_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 14:59:46,055 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 14:59:46,063 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tfk2xuyb 2026-03-06 14:59:46,092 No soops found for time: 2023-06-13 01:38:11.060313 - 2023-06-13 04:02:11.075416 2026-03-06 14:59:46,194 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/13/CAL/solo_CAL_stix-cal-energy_20230613T013811-20230613T040211_V02.fits 2026-03-06 14:59:46,363 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qj8uoegs 2026-03-06 14:59:46,364 Read config from in: /tmp/ecc_context_ecc_cfg_1_qj8uoegs/post_ecc.ini 2026-03-06 14:59:49,029 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qj8uoegs/solo_L1_stix-cal-energy_20230615_V03_ecc_in.fits 2026-03-06 15:08:39,117 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230615_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230615_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230615_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230615_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 15:08:45,270 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 15:08:45,278 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qj8uoegs 2026-03-06 15:08:45,304 No soops found for time: 2023-06-15 01:38:23.362384 - 2023-06-15 04:02:23.377487 2026-03-06 15:08:45,397 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/15/CAL/solo_CAL_stix-cal-energy_20230615T013823-20230615T040223_V02.fits 2026-03-06 15:08:45,556 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ruge8ndd 2026-03-06 15:08:45,557 Read config from in: /tmp/ecc_context_ecc_cfg_1_ruge8ndd/post_ecc.ini 2026-03-06 15:08:46,785 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ruge8ndd/solo_L1_stix-cal-energy_20230604_V03_ecc_in.fits 2026-03-06 15:17:02,881 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230604_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230604_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230604_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230604_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 15:17:09,168 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 15:17:09,175 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ruge8ndd 2026-03-06 15:17:09,200 No soops found for time: 2023-06-04 19:44:50.815057 - 2023-06-04 20:10:21.817733 2026-03-06 15:17:09,293 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/06/04/CAL/solo_CAL_stix-cal-energy_20230604T194450-20230604T201021_V02.fits 2026-03-06 15:17:09,721 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m9oa4sh8 2026-03-06 15:17:09,721 Read config from in: /tmp/ecc_context_ecc_cfg_1_m9oa4sh8/post_ecc.ini 2026-03-06 15:17:10,964 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m9oa4sh8/solo_L1_stix-cal-energy_20230330_V03_ecc_in.fits 2026-03-06 15:26:15,098 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230330_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230330_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230330_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230330_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 15:26:22,329 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-06 15:26:22,335 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m9oa4sh8 2026-03-06 15:26:22,361 Soop found: SOOP 2026-03-06 15:26:22,461 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/30/CAL/solo_CAL_stix-cal-energy_20230330T200824-20230330T212207_V02.fits 2026-03-06 15:26:22,895 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w431_r6v 2026-03-06 15:26:22,896 Read config from in: /tmp/ecc_context_ecc_cfg_1_w431_r6v/post_ecc.ini 2026-03-06 15:26:24,133 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w431_r6v/solo_L1_stix-cal-energy_20230310_V03_ecc_in.fits 2026-03-06 15:35:28,965 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230310_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230310_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230310_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230310_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 15:35:35,198 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 15:35:35,208 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w431_r6v 2026-03-06 15:35:35,236 No soops found for time: 2023-03-10 00:09:08.534230 - 2023-03-10 02:33:07.549459 2026-03-06 15:35:35,335 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/10/CAL/solo_CAL_stix-cal-energy_20230310T000908-20230310T023307_V02.fits 2026-03-06 15:35:35,502 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gkyjvw27 2026-03-06 15:35:35,503 Read config from in: /tmp/ecc_context_ecc_cfg_1_gkyjvw27/post_ecc.ini 2026-03-06 15:35:36,768 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gkyjvw27/solo_L1_stix-cal-energy_20230301_V03_ecc_in.fits 2026-03-06 15:44:25,391 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230301_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230301_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230301_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230301_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 15:44:31,551 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 15:44:31,558 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gkyjvw27 2026-03-06 15:44:31,585 No soops found for time: 2023-03-01 17:50:01.277101 - 2023-03-01 20:14:01.292332 2026-03-06 15:44:31,684 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/01/CAL/solo_CAL_stix-cal-energy_20230301T175001-20230301T201401_V02.fits 2026-03-06 15:44:31,844 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_inltz8sz 2026-03-06 15:44:31,845 Read config from in: /tmp/ecc_context_ecc_cfg_1_inltz8sz/post_ecc.ini 2026-03-06 15:44:33,113 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_inltz8sz/solo_L1_stix-cal-energy_20230308_V03_ecc_in.fits 2026-03-06 15:56:07,566 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230308_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230308_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 15:56:15,026 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 15:56:15,035 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_inltz8sz 2026-03-06 15:56:15,059 No soops found for time: 2023-03-08 00:49:11.233857 - 2023-03-08 03:13:11.249088 2026-03-06 15:56:15,151 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/08/CAL/solo_CAL_stix-cal-energy_20230308T004911-20230308T031311_V02.fits 2026-03-06 15:56:15,309 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0s68ebwx 2026-03-06 15:56:15,310 Read config from in: /tmp/ecc_context_ecc_cfg_1_0s68ebwx/post_ecc.ini 2026-03-06 15:56:16,544 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0s68ebwx/solo_L1_stix-cal-energy_20230305_V03_ecc_in.fits 2026-03-06 16:05:04,473 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230305_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230305_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230305_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230305_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 16:05:10,707 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 16:05:10,713 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0s68ebwx 2026-03-06 16:05:10,737 No soops found for time: 2023-03-05 17:50:26.884608 - 2023-03-05 18:27:23.888505 2026-03-06 16:05:10,832 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/05/CAL/solo_CAL_stix-cal-energy_20230305T175026-20230305T182723_V02.fits 2026-03-06 16:05:10,991 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6ibiokp_ 2026-03-06 16:05:10,991 Read config from in: /tmp/ecc_context_ecc_cfg_1_6ibiokp_/post_ecc.ini 2026-03-06 16:05:12,220 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6ibiokp_/solo_L1_stix-cal-energy_20230314_V03_ecc_in.fits 2026-03-06 16:14:27,089 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230314_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230314_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230314_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230314_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 16:14:33,303 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 16:14:33,310 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6ibiokp_ 2026-03-06 16:14:33,334 No soops found for time: 2023-03-14 00:13:44.146294 - 2023-03-14 02:37:45.161580 2026-03-06 16:14:33,430 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/14/CAL/solo_CAL_stix-cal-energy_20230314T001344-20230314T023745_V02.fits 2026-03-06 16:14:33,858 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rp_ppdty 2026-03-06 16:14:33,859 Read config from in: /tmp/ecc_context_ecc_cfg_1_rp_ppdty/post_ecc.ini 2026-03-06 16:14:35,100 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rp_ppdty/solo_L1_stix-cal-energy_20230307_V03_ecc_in.fits 2026-03-06 16:26:16,560 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230307_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230307_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230307_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230307_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 16:26:22,712 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 16:26:22,719 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rp_ppdty 2026-03-06 16:26:22,743 No soops found for time: 2023-03-07 00:49:05.080629 - 2023-03-07 03:13:05.095816 2026-03-06 16:26:22,840 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/07/CAL/solo_CAL_stix-cal-energy_20230307T004905-20230307T031305_V02.fits 2026-03-06 16:26:22,997 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h65nm27p 2026-03-06 16:26:22,997 Read config from in: /tmp/ecc_context_ecc_cfg_1_h65nm27p/post_ecc.ini 2026-03-06 16:26:24,243 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h65nm27p/solo_L1_stix-cal-energy_20230320_V03_ecc_in.fits 2026-03-06 16:35:32,505 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230320_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230320_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230320_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230320_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 16:35:38,682 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 16:35:38,690 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h65nm27p 2026-03-06 16:35:38,714 Soop found: SOOP 2026-03-06 16:35:38,813 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/20/CAL/solo_CAL_stix-cal-energy_20230320T035452-20230320T062239_V02.fits 2026-03-06 16:35:38,969 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3iw85sey 2026-03-06 16:35:38,970 Read config from in: /tmp/ecc_context_ecc_cfg_1_3iw85sey/post_ecc.ini 2026-03-06 16:35:40,218 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3iw85sey/solo_L1_stix-cal-energy_20230306_V03_ecc_in.fits 2026-03-06 16:47:14,342 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230306_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230306_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 16:47:20,549 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 16:47:20,558 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3iw85sey 2026-03-06 16:47:20,591 No soops found for time: 2023-03-06 00:04:17.924037 - 2023-03-06 02:29:28.939348 2026-03-06 16:47:20,688 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/06/CAL/solo_CAL_stix-cal-energy_20230306T000417-20230306T022928_V02.fits 2026-03-06 16:47:20,852 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fewhj_6v 2026-03-06 16:47:20,852 Read config from in: /tmp/ecc_context_ecc_cfg_1_fewhj_6v/post_ecc.ini 2026-03-06 16:47:22,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fewhj_6v/solo_L1_stix-cal-energy_20230303_V03_ecc_in.fits 2026-03-06 16:56:14,764 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230303_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230303_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230303_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230303_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 16:56:22,508 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 16:56:22,516 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fewhj_6v 2026-03-06 16:56:22,541 No soops found for time: 2023-03-03 17:50:14.580848 - 2023-03-03 20:14:14.596035 2026-03-06 16:56:22,641 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/03/CAL/solo_CAL_stix-cal-energy_20230303T175014-20230303T201414_V02.fits 2026-03-06 16:56:22,810 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u9x6ickc 2026-03-06 16:56:22,811 Read config from in: /tmp/ecc_context_ecc_cfg_1_u9x6ickc/post_ecc.ini 2026-03-06 16:56:24,069 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u9x6ickc/solo_L1_stix-cal-energy_20230317_V03_ecc_in.fits 2026-03-06 17:05:34,505 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230317_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230317_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 17:05:41,190 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-06 17:05:41,198 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u9x6ickc 2026-03-06 17:05:41,226 No soops found for time: 2023-03-17 00:17:17.605195 - 2023-03-17 02:41:17.620479 2026-03-06 17:05:41,325 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/17/CAL/solo_CAL_stix-cal-energy_20230317T001717-20230317T024117_V02.fits 2026-03-06 17:05:41,487 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w76cvl3b 2026-03-06 17:05:41,488 Read config from in: /tmp/ecc_context_ecc_cfg_1_w76cvl3b/post_ecc.ini 2026-03-06 17:05:42,745 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w76cvl3b/solo_L1_stix-cal-energy_20230331_V03_ecc_in.fits 2026-03-06 17:14:54,188 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230331_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230331_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230331_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230331_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 17:15:00,360 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 17:15:00,368 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w76cvl3b 2026-03-06 17:15:00,396 Soop found: SOOP 2026-03-06 17:15:00,496 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/31/CAL/solo_CAL_stix-cal-energy_20230331T161352-20230331T183840_V02.fits 2026-03-06 17:15:00,934 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9ef2fm2s 2026-03-06 17:15:00,935 Read config from in: /tmp/ecc_context_ecc_cfg_1_9ef2fm2s/post_ecc.ini 2026-03-06 17:15:02,194 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9ef2fm2s/solo_L1_stix-cal-energy_20230318_V03_ecc_in.fits 2026-03-06 17:24:18,253 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230318_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230318_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230318_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230318_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 17:24:24,523 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 17:24:24,532 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9ef2fm2s 2026-03-06 17:24:24,561 No soops found for time: 2023-03-18 00:17:23.758047 - 2023-03-18 02:57:11.775009 2026-03-06 17:24:24,659 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/18/CAL/solo_CAL_stix-cal-energy_20230318T001723-20230318T025711_V02.fits 2026-03-06 17:24:24,821 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8v468h4i 2026-03-06 17:24:24,821 Read config from in: /tmp/ecc_context_ecc_cfg_1_8v468h4i/post_ecc.ini 2026-03-06 17:24:26,075 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8v468h4i/solo_L1_stix-cal-energy_20230323_V03_ecc_in.fits 2026-03-06 17:33:50,141 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230323_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230323_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230323_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230323_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 17:33:57,414 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-06 17:33:57,423 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8v468h4i 2026-03-06 17:33:57,452 Soop found: SOOP 2026-03-06 17:33:57,552 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/23/CAL/solo_CAL_stix-cal-energy_20230323T043303-20230323T065746_V02.fits 2026-03-06 17:33:57,712 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_exe8qt_j 2026-03-06 17:33:57,712 Read config from in: /tmp/ecc_context_ecc_cfg_1_exe8qt_j/post_ecc.ini 2026-03-06 17:33:58,954 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_exe8qt_j/solo_L1_stix-cal-energy_20230316_V03_ecc_in.fits 2026-03-06 17:43:25,641 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230316_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230316_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230316_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230316_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 17:43:32,032 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 17:43:32,039 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_exe8qt_j 2026-03-06 17:43:32,068 No soops found for time: 2023-03-16 00:14:14.452030 - 2023-03-16 02:38:14.467314 2026-03-06 17:43:32,166 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/16/CAL/solo_CAL_stix-cal-energy_20230316T001414-20230316T023814_V02.fits 2026-03-06 17:43:32,326 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ot0oqtzi 2026-03-06 17:43:32,327 Read config from in: /tmp/ecc_context_ecc_cfg_1_ot0oqtzi/post_ecc.ini 2026-03-06 17:43:35,014 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ot0oqtzi/solo_L1_stix-cal-energy_20230321_V03_ecc_in.fits 2026-03-06 17:53:03,836 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230321_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230321_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230321_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230321_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 17:53:10,016 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 17:53:10,024 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ot0oqtzi 2026-03-06 17:53:10,050 No soops found for time: 2023-03-21 04:32:51.243685 - 2023-03-21 06:56:51.258969 2026-03-06 17:53:10,149 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/21/CAL/solo_CAL_stix-cal-energy_20230321T043251-20230321T065651_V02.fits 2026-03-06 17:53:10,310 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dxkdk8pz 2026-03-06 17:53:10,310 Read config from in: /tmp/ecc_context_ecc_cfg_1_dxkdk8pz/post_ecc.ini 2026-03-06 17:53:11,547 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dxkdk8pz/solo_L1_stix-cal-energy_20230327_V03_ecc_in.fits 2026-03-06 18:01:58,247 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230327_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230327_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230327_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230327_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 18:02:04,486 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 18:02:04,493 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dxkdk8pz 2026-03-06 18:02:04,520 Soop found: SOOP 2026-03-06 18:02:04,619 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/27/CAL/solo_CAL_stix-cal-energy_20230327T195353-20230327T221752_V02.fits 2026-03-06 18:02:04,784 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hzyeitvr 2026-03-06 18:02:04,784 Read config from in: /tmp/ecc_context_ecc_cfg_1_hzyeitvr/post_ecc.ini 2026-03-06 18:02:06,028 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hzyeitvr/solo_L1_stix-cal-energy_20230311_V03_ecc_in.fits 2026-03-06 18:11:13,742 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230311_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230311_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230311_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230311_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 18:11:19,990 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 18:11:19,998 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hzyeitvr 2026-03-06 18:11:20,024 No soops found for time: 2023-03-11 00:09:14.686545 - 2023-03-11 02:33:54.701846 2026-03-06 18:11:20,124 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/11/CAL/solo_CAL_stix-cal-energy_20230311T000914-20230311T023354_V02.fits 2026-03-06 18:11:20,517 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vbr4mzde 2026-03-06 18:11:20,518 Read config from in: /tmp/ecc_context_ecc_cfg_1_vbr4mzde/post_ecc.ini 2026-03-06 18:11:21,766 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vbr4mzde/solo_L1_stix-cal-energy_20230319_V03_ecc_in.fits 2026-03-06 18:20:23,462 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230319_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230319_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 18:20:29,622 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 18:20:29,630 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vbr4mzde 2026-03-06 18:20:29,657 No soops found for time: 2023-03-19 03:54:45.933960 - 2023-03-19 06:18:45.949244 2026-03-06 18:20:29,752 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/19/CAL/solo_CAL_stix-cal-energy_20230319T035445-20230319T061845_V02.fits 2026-03-06 18:20:29,911 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zvnvcqps 2026-03-06 18:20:29,912 Read config from in: /tmp/ecc_context_ecc_cfg_1_zvnvcqps/post_ecc.ini 2026-03-06 18:20:31,171 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zvnvcqps/solo_L1_stix-cal-energy_20230322_V03_ecc_in.fits 2026-03-06 18:30:16,369 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230322_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230322_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230322_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230322_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 18:30:22,575 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 18:30:22,584 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zvnvcqps 2026-03-06 18:30:22,611 Soop found: SOOP 2026-03-06 18:30:22,709 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/22/CAL/solo_CAL_stix-cal-energy_20230322T043257-20230322T065657_V02.fits 2026-03-06 18:30:22,870 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wag256hw 2026-03-06 18:30:22,871 Read config from in: /tmp/ecc_context_ecc_cfg_1_wag256hw/post_ecc.ini 2026-03-06 18:30:24,126 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wag256hw/solo_L1_stix-cal-energy_20230328_V03_ecc_in.fits 2026-03-06 18:39:25,978 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230328_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230328_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230328_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230328_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 18:39:33,770 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 18:39:33,782 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wag256hw 2026-03-06 18:39:33,806 Soop found: SOOP 2026-03-06 18:39:33,903 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/28/CAL/solo_CAL_stix-cal-energy_20230328T195358-20230328T221825_V02.fits 2026-03-06 18:39:34,062 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wl8ypskt 2026-03-06 18:39:34,063 Read config from in: /tmp/ecc_context_ecc_cfg_1_wl8ypskt/post_ecc.ini 2026-03-06 18:39:35,298 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wl8ypskt/solo_L1_stix-cal-energy_20230329_V03_ecc_in.fits 2026-03-06 18:48:25,618 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230329_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230329_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230329_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230329_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 18:48:32,191 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 18:48:32,204 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wl8ypskt 2026-03-06 18:48:32,234 Soop found: SOOP 2026-03-06 18:48:32,234 Soop found: SOOP 2026-03-06 18:48:32,337 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/29/CAL/solo_CAL_stix-cal-energy_20230329T200818-20230329T223218_V02.fits 2026-03-06 18:48:32,510 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wyanpdae 2026-03-06 18:48:32,510 Read config from in: /tmp/ecc_context_ecc_cfg_1_wyanpdae/post_ecc.ini 2026-03-06 18:48:33,835 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wyanpdae/solo_L1_stix-cal-energy_20230302_V03_ecc_in.fits 2026-03-06 18:57:17,164 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230302_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230302_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230302_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230302_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 18:57:23,314 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 18:57:23,322 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wyanpdae 2026-03-06 18:57:23,350 No soops found for time: 2023-03-02 17:50:07.428967 - 2023-03-02 20:14:07.444154 2026-03-06 18:57:23,444 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/02/CAL/solo_CAL_stix-cal-energy_20230302T175007-20230302T201407_V02.fits 2026-03-06 18:57:23,605 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7b46agar 2026-03-06 18:57:23,606 Read config from in: /tmp/ecc_context_ecc_cfg_1_7b46agar/post_ecc.ini 2026-03-06 18:57:24,857 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7b46agar/solo_L1_stix-cal-energy_20230313_V03_ecc_in.fits 2026-03-06 19:06:47,822 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230313_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230313_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230313_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230313_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 19:06:54,034 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 19:06:54,047 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7b46agar 2026-03-06 19:06:54,078 No soops found for time: 2023-03-13 00:13:37.993442 - 2023-03-13 02:37:38.008727 2026-03-06 19:06:54,179 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/13/CAL/solo_CAL_stix-cal-energy_20230313T001337-20230313T023738_V02.fits 2026-03-06 19:06:54,347 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p62fxu1i 2026-03-06 19:06:54,348 Read config from in: /tmp/ecc_context_ecc_cfg_1_p62fxu1i/post_ecc.ini 2026-03-06 19:06:55,606 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p62fxu1i/solo_L1_stix-cal-energy_20230315_V03_ecc_in.fits 2026-03-06 19:16:29,637 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230315_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230315_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230315_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230315_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 19:16:35,855 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 19:16:35,862 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p62fxu1i 2026-03-06 19:16:35,888 No soops found for time: 2023-03-15 00:14:08.299178 - 2023-03-15 02:38:07.314461 2026-03-06 19:16:35,983 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/15/CAL/solo_CAL_stix-cal-energy_20230315T001408-20230315T023807_V02.fits 2026-03-06 19:16:36,140 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o9uz082_ 2026-03-06 19:16:36,140 Read config from in: /tmp/ecc_context_ecc_cfg_1_o9uz082_/post_ecc.ini 2026-03-06 19:16:37,395 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o9uz082_/solo_L1_stix-cal-energy_20230304_V03_ecc_in.fits 2026-03-06 19:25:32,118 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230304_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230304_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230304_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230304_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 19:25:38,303 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 19:25:38,310 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o9uz082_ 2026-03-06 19:25:38,338 No soops found for time: 2023-03-04 17:50:20.732728 - 2023-03-04 20:14:19.747914 2026-03-06 19:25:38,433 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/03/04/CAL/solo_CAL_stix-cal-energy_20230304T175020-20230304T201419_V02.fits 2026-03-06 19:25:38,860 Successfully read ELUT file: /home/stixcore/STIXCore/stixcore/config/data/common/elut/elut_table_20231019.csv 2026-03-06 19:25:38,890 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kfk0s5q9 2026-03-06 19:25:38,891 Read config from in: /tmp/ecc_context_ecc_cfg_1_kfk0s5q9/post_ecc.ini 2026-03-06 19:25:41,677 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kfk0s5q9/solo_L1_stix-cal-energy_20231230_V03_ecc_in.fits 2026-03-06 19:35:17,601 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231230_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231230_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231230_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231230_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 19:35:23,684 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 19:35:23,691 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kfk0s5q9 2026-03-06 19:35:23,716 Soop found: SOOP 2026-03-06 19:35:23,817 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/30/CAL/solo_CAL_stix-cal-energy_20231230T132346-20231230T154746_V02.fits 2026-03-06 19:35:23,957 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_boafmyej 2026-03-06 19:35:23,957 Read config from in: /tmp/ecc_context_ecc_cfg_1_boafmyej/post_ecc.ini 2026-03-06 19:35:25,196 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_boafmyej/solo_L1_stix-cal-energy_20231210_V03_ecc_in.fits 2026-03-06 19:45:09,525 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231210_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231210_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 19:45:15,742 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 19:45:15,749 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_boafmyej 2026-03-06 19:45:15,774 Soop found: SOOP 2026-03-06 19:45:15,871 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/10/CAL/solo_CAL_stix-cal-energy_20231210T121223-20231210T143623_V02.fits 2026-03-06 19:45:16,257 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jpjeie_l 2026-03-06 19:45:16,258 Read config from in: /tmp/ecc_context_ecc_cfg_1_jpjeie_l/post_ecc.ini 2026-03-06 19:45:17,502 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jpjeie_l/solo_L1_stix-cal-energy_20231201_V03_ecc_in.fits 2026-03-06 19:55:01,348 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231201_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231201_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 19:55:07,699 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 19:55:07,706 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jpjeie_l 2026-03-06 19:55:07,732 Soop found: SOOP 2026-03-06 19:55:07,829 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/01/CAL/solo_CAL_stix-cal-energy_20231201T081612-20231201T104011_V02.fits 2026-03-06 19:55:08,228 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ozz2tj3w 2026-03-06 19:55:08,229 Read config from in: /tmp/ecc_context_ecc_cfg_1_ozz2tj3w/post_ecc.ini 2026-03-06 19:55:09,479 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ozz2tj3w/solo_L1_stix-cal-energy_20231224_V03_ecc_in.fits 2026-03-06 20:04:47,228 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231224_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231224_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 20:04:53,354 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 20:04:53,361 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ozz2tj3w 2026-03-06 20:04:53,387 Soop found: SOOP 2026-03-06 20:04:53,484 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/24/CAL/solo_CAL_stix-cal-energy_20231224T131040-20231224T153509_V02.fits 2026-03-06 20:04:53,646 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rm591ivb 2026-03-06 20:04:53,647 Read config from in: /tmp/ecc_context_ecc_cfg_1_rm591ivb/post_ecc.ini 2026-03-06 20:04:54,886 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rm591ivb/solo_L1_stix-cal-energy_20231208_V03_ecc_in.fits 2026-03-06 20:14:17,999 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231208_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231208_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 20:14:24,232 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 20:14:24,239 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rm591ivb 2026-03-06 20:14:24,265 Soop found: SOOP 2026-03-06 20:14:24,365 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/08/CAL/solo_CAL_stix-cal-energy_20231208T121210-20231208T143610_V02.fits 2026-03-06 20:14:24,529 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__bcvdpjh 2026-03-06 20:14:24,529 Read config from in: /tmp/ecc_context_ecc_cfg_1__bcvdpjh/post_ecc.ini 2026-03-06 20:14:25,786 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__bcvdpjh/solo_L1_stix-cal-energy_20231205_V03_ecc_in.fits 2026-03-06 20:23:46,136 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 20:23:52,344 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 20:23:52,351 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__bcvdpjh 2026-03-06 20:23:52,379 Soop found: SOOP 2026-03-06 20:23:52,481 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/05/CAL/solo_CAL_stix-cal-energy_20231205T013914-20231205T040314_V02.fits 2026-03-06 20:23:52,653 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__8waom3t 2026-03-06 20:23:52,653 Read config from in: /tmp/ecc_context_ecc_cfg_1__8waom3t/post_ecc.ini 2026-03-06 20:23:55,375 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__8waom3t/solo_L1_stix-cal-energy_20231214_V03_ecc_in.fits 2026-03-06 20:33:35,042 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231214_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231214_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 20:33:41,236 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 20:33:41,243 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__8waom3t 2026-03-06 20:33:41,269 Soop found: SOOP 2026-03-06 20:33:41,366 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/14/CAL/solo_CAL_stix-cal-energy_20231214T121247-20231214T143646_V02.fits 2026-03-06 20:33:41,525 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_myzxbcz5 2026-03-06 20:33:41,526 Read config from in: /tmp/ecc_context_ecc_cfg_1_myzxbcz5/post_ecc.ini 2026-03-06 20:33:42,773 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_myzxbcz5/solo_L1_stix-cal-energy_20231207_V03_ecc_in.fits 2026-03-06 20:43:06,702 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231207_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231207_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 20:43:12,890 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 20:43:12,897 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_myzxbcz5 2026-03-06 20:43:12,923 Soop found: SOOP 2026-03-06 20:43:13,022 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/07/CAL/solo_CAL_stix-cal-energy_20231207T121204-20231207T143604_V02.fits 2026-03-06 20:43:13,192 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_slxoeps8 2026-03-06 20:43:13,192 Read config from in: /tmp/ecc_context_ecc_cfg_1_slxoeps8/post_ecc.ini 2026-03-06 20:43:14,438 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_slxoeps8/solo_L1_stix-cal-energy_20231220_V03_ecc_in.fits 2026-03-06 20:52:45,779 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 20:52:51,954 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 20:52:51,961 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_slxoeps8 2026-03-06 20:52:51,987 Soop found: SOOP 2026-03-06 20:52:52,084 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/20/CAL/solo_CAL_stix-cal-energy_20231220T131015-20231220T153415_V02.fits 2026-03-06 20:52:52,264 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_27qbz9_r 2026-03-06 20:52:52,265 Read config from in: /tmp/ecc_context_ecc_cfg_1_27qbz9_r/post_ecc.ini 2026-03-06 20:52:53,521 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_27qbz9_r/solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits 2026-03-06 21:02:18,205 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 21:02:24,543 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 21:02:24,552 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_27qbz9_r 2026-03-06 21:02:24,588 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q6p7iszf 2026-03-06 21:02:24,588 Read config from in: /tmp/ecc_context_ecc_cfg_1_q6p7iszf/post_ecc.ini 2026-03-06 21:02:25,850 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q6p7iszf/solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits 2026-03-06 21:11:55,005 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 21:12:01,243 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 21:12:01,249 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q6p7iszf 2026-03-06 21:12:01,273 Soop found: SOOP 2026-03-06 21:12:01,368 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/06/CAL/solo_CAL_stix-cal-energy_20231206T013921-20231206T024125_V02.fits 2026-03-06 21:12:01,404 Soop found: SOOP 2026-03-06 21:12:01,496 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/06/CAL/solo_CAL_stix-cal-energy_20231206T121158-20231206T143558_V02.fits 2026-03-06 21:12:01,656 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_am3s1kx1 2026-03-06 21:12:01,656 Read config from in: /tmp/ecc_context_ecc_cfg_1_am3s1kx1/post_ecc.ini 2026-03-06 21:12:02,908 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_am3s1kx1/solo_L1_stix-cal-energy_20231203_V03_ecc_in.fits 2026-03-06 21:21:30,058 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231203_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231203_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 21:21:37,784 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 21:21:37,791 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_am3s1kx1 2026-03-06 21:21:37,815 Soop found: SOOP 2026-03-06 21:21:37,915 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/03/CAL/solo_CAL_stix-cal-energy_20231203T081623-20231203T095044_V02.fits 2026-03-06 21:21:38,087 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ob3lhhj3 2026-03-06 21:21:38,088 Read config from in: /tmp/ecc_context_ecc_cfg_1_ob3lhhj3/post_ecc.ini 2026-03-06 21:21:39,323 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ob3lhhj3/solo_L1_stix-cal-energy_20231217_V03_ecc_in.fits 2026-03-06 21:31:19,092 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231217_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231217_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 21:31:25,263 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 21:31:25,271 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ob3lhhj3 2026-03-06 21:31:25,296 Soop found: SOOP 2026-03-06 21:31:25,397 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/17/CAL/solo_CAL_stix-cal-energy_20231217T121305-20231217T143713_V02.fits 2026-03-06 21:31:25,568 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6r_7glei 2026-03-06 21:31:25,569 Read config from in: /tmp/ecc_context_ecc_cfg_1_6r_7glei/post_ecc.ini 2026-03-06 21:31:26,814 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6r_7glei/solo_L1_stix-cal-energy_20231231_V03_ecc_in.fits 2026-03-06 21:40:49,139 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231231_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231231_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231231_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231231_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 21:40:55,306 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 21:40:55,313 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6r_7glei 2026-03-06 21:40:55,340 Soop found: SOOP 2026-03-06 21:40:55,435 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/31/CAL/solo_CAL_stix-cal-energy_20231231T132352-20231231T154752_V02.fits 2026-03-06 21:40:55,876 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8t9jx4br 2026-03-06 21:40:55,877 Read config from in: /tmp/ecc_context_ecc_cfg_1_8t9jx4br/post_ecc.ini 2026-03-06 21:40:57,116 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8t9jx4br/solo_L1_stix-cal-energy_20231218_V03_ecc_in.fits 2026-03-06 21:50:36,088 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231218_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231218_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 21:50:42,300 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 21:50:42,308 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8t9jx4br 2026-03-06 21:50:42,334 Soop found: SOOP 2026-03-06 21:50:42,440 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/18/CAL/solo_CAL_stix-cal-energy_20231218T131004-20231218T153403_V02.fits 2026-03-06 21:50:42,879 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9qrn_j1a 2026-03-06 21:50:42,880 Read config from in: /tmp/ecc_context_ecc_cfg_1_9qrn_j1a/post_ecc.ini 2026-03-06 21:50:44,128 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9qrn_j1a/solo_L1_stix-cal-energy_20231223_V03_ecc_in.fits 2026-03-06 22:00:12,327 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231223_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231223_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 22:00:18,655 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 22:00:18,663 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9qrn_j1a 2026-03-06 22:00:18,690 Soop found: SOOP 2026-03-06 22:00:18,784 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/23/CAL/solo_CAL_stix-cal-energy_20231223T131034-20231223T153433_V02.fits 2026-03-06 22:00:18,948 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h31291qn 2026-03-06 22:00:18,949 Read config from in: /tmp/ecc_context_ecc_cfg_1_h31291qn/post_ecc.ini 2026-03-06 22:00:20,218 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h31291qn/solo_L1_stix-cal-energy_20231216_V03_ecc_in.fits 2026-03-06 22:09:54,112 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231216_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231216_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 22:10:00,271 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 22:10:00,278 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h31291qn 2026-03-06 22:10:00,303 Soop found: SOOP 2026-03-06 22:10:00,397 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/16/CAL/solo_CAL_stix-cal-energy_20231216T121259-20231216T143658_V02.fits 2026-03-06 22:10:00,562 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6h48tnd1 2026-03-06 22:10:00,562 Read config from in: /tmp/ecc_context_ecc_cfg_1_6h48tnd1/post_ecc.ini 2026-03-06 22:10:03,201 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6h48tnd1/solo_L1_stix-cal-energy_20231221_V03_ecc_in.fits 2026-03-06 22:19:37,407 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231221_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231221_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 22:19:43,688 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 22:19:43,695 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6h48tnd1 2026-03-06 22:19:43,721 Soop found: SOOP 2026-03-06 22:19:43,816 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/21/CAL/solo_CAL_stix-cal-energy_20231221T131021-20231221T153420_V02.fits 2026-03-06 22:19:43,978 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__qmqng14 2026-03-06 22:19:43,979 Read config from in: /tmp/ecc_context_ecc_cfg_1__qmqng14/post_ecc.ini 2026-03-06 22:19:45,227 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__qmqng14/solo_L1_stix-cal-energy_20231212_V03_ecc_in.fits 2026-03-06 22:29:16,586 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231212_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231212_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 22:29:22,936 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 22:29:22,943 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__qmqng14 2026-03-06 22:29:22,968 Soop found: SOOP 2026-03-06 22:29:23,068 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/12/CAL/solo_CAL_stix-cal-energy_20231212T121235-20231212T143634_V02.fits 2026-03-06 22:29:23,237 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kgck70v7 2026-03-06 22:29:23,238 Read config from in: /tmp/ecc_context_ecc_cfg_1_kgck70v7/post_ecc.ini 2026-03-06 22:29:24,496 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kgck70v7/solo_L1_stix-cal-energy_20231227_V03_ecc_in.fits 2026-03-06 22:38:58,257 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231227_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231227_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 22:39:04,400 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 22:39:04,407 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kgck70v7 2026-03-06 22:39:04,432 Soop found: SOOP 2026-03-06 22:39:04,529 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/27/CAL/solo_CAL_stix-cal-energy_20231227T132328-20231227T154727_V02.fits 2026-03-06 22:39:04,686 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7y4kj68n 2026-03-06 22:39:04,687 Read config from in: /tmp/ecc_context_ecc_cfg_1_7y4kj68n/post_ecc.ini 2026-03-06 22:39:05,926 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7y4kj68n/solo_L1_stix-cal-energy_20231211_V03_ecc_in.fits 2026-03-06 22:48:37,396 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231211_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231211_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 22:48:43,594 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 22:48:43,601 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7y4kj68n 2026-03-06 22:48:43,627 Soop found: SOOP 2026-03-06 22:48:43,724 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/11/CAL/solo_CAL_stix-cal-energy_20231211T121229-20231211T143628_V02.fits 2026-03-06 22:48:43,892 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v6xhg4tx 2026-03-06 22:48:43,893 Read config from in: /tmp/ecc_context_ecc_cfg_1_v6xhg4tx/post_ecc.ini 2026-03-06 22:48:45,148 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v6xhg4tx/solo_L1_stix-cal-energy_20231226_V03_ecc_in.fits 2026-03-06 22:58:20,248 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231226_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231226_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 22:58:26,494 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 22:58:26,501 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v6xhg4tx 2026-03-06 22:58:26,527 Soop found: SOOP 2026-03-06 22:58:26,624 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/26/CAL/solo_CAL_stix-cal-energy_20231226T132322-20231226T154721_V02.fits 2026-03-06 22:58:27,064 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hpfu4jqh 2026-03-06 22:58:27,065 Read config from in: /tmp/ecc_context_ecc_cfg_1_hpfu4jqh/post_ecc.ini 2026-03-06 22:58:28,307 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hpfu4jqh/solo_L1_stix-cal-energy_20231219_V03_ecc_in.fits 2026-03-06 23:08:03,672 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231219_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231219_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 23:08:11,383 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 23:08:11,390 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hpfu4jqh 2026-03-06 23:08:11,414 Soop found: SOOP 2026-03-06 23:08:11,509 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/19/CAL/solo_CAL_stix-cal-energy_20231219T131010-20231219T153409_V02.fits 2026-03-06 23:08:11,677 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e60729f7 2026-03-06 23:08:11,677 Read config from in: /tmp/ecc_context_ecc_cfg_1_e60729f7/post_ecc.ini 2026-03-06 23:08:12,918 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e60729f7/solo_L1_stix-cal-energy_20231222_V03_ecc_in.fits 2026-03-06 23:18:00,057 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231222_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231222_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 23:18:06,218 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 23:18:06,225 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e60729f7 2026-03-06 23:18:06,249 Soop found: SOOP 2026-03-06 23:18:06,342 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/22/CAL/solo_CAL_stix-cal-energy_20231222T131027-20231222T153427_V02.fits 2026-03-06 23:18:06,741 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ezw5q69t 2026-03-06 23:18:06,741 Read config from in: /tmp/ecc_context_ecc_cfg_1_ezw5q69t/post_ecc.ini 2026-03-06 23:18:07,984 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ezw5q69t/solo_L1_stix-cal-energy_20231225_V03_ecc_in.fits 2026-03-06 23:27:47,653 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231225_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231225_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 23:27:53,842 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 23:27:53,849 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ezw5q69t 2026-03-06 23:27:53,873 Soop found: SOOP 2026-03-06 23:27:53,969 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/25/CAL/solo_CAL_stix-cal-energy_20231225T132316-20231225T154715_V02.fits 2026-03-06 23:27:54,375 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_panvveh4 2026-03-06 23:27:54,376 Read config from in: /tmp/ecc_context_ecc_cfg_1_panvveh4/post_ecc.ini 2026-03-06 23:27:55,628 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_panvveh4/solo_L1_stix-cal-energy_20231228_V03_ecc_in.fits 2026-03-06 23:37:31,564 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231228_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231228_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 23:37:37,725 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 23:37:37,731 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_panvveh4 2026-03-06 23:37:37,756 Soop found: SOOP 2026-03-06 23:37:37,850 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/28/CAL/solo_CAL_stix-cal-energy_20231228T132333-20231228T154733_V02.fits 2026-03-06 23:37:38,008 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__tsotcin 2026-03-06 23:37:38,008 Read config from in: /tmp/ecc_context_ecc_cfg_1__tsotcin/post_ecc.ini 2026-03-06 23:37:39,249 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__tsotcin/solo_L1_stix-cal-energy_20231209_V03_ecc_in.fits 2026-03-06 23:46:58,196 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 23:47:04,537 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 23:47:04,544 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__tsotcin 2026-03-06 23:47:04,569 Soop found: SOOP 2026-03-06 23:47:04,665 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/09/CAL/solo_CAL_stix-cal-energy_20231209T121216-20231209T143615_V02.fits 2026-03-06 23:47:05,022 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__10zk0_c 2026-03-06 23:47:05,023 Read config from in: /tmp/ecc_context_ecc_cfg_1__10zk0_c/post_ecc.ini 2026-03-06 23:47:06,271 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__10zk0_c/solo_L1_stix-cal-energy_20231229_V03_ecc_in.fits 2026-03-06 23:56:49,313 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231229_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231229_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231229_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231229_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-06 23:56:55,524 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-06 23:56:55,531 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__10zk0_c 2026-03-06 23:56:55,557 Soop found: SOOP 2026-03-06 23:56:55,652 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/29/CAL/solo_CAL_stix-cal-energy_20231229T132339-20231229T154739_V02.fits 2026-03-06 23:56:55,819 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1vwmjc_1 2026-03-06 23:56:55,820 Read config from in: /tmp/ecc_context_ecc_cfg_1_1vwmjc_1/post_ecc.ini 2026-03-06 23:56:57,069 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1vwmjc_1/solo_L1_stix-cal-energy_20231202_V03_ecc_in.fits 2026-03-07 00:06:44,079 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231202_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231202_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 00:06:51,851 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 00:06:51,858 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1vwmjc_1 2026-03-07 00:06:51,881 Soop found: SOOP 2026-03-07 00:06:51,974 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/02/CAL/solo_CAL_stix-cal-energy_20231202T081618-20231202T104017_V02.fits 2026-03-07 00:06:52,408 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w2uetz9e 2026-03-07 00:06:52,409 Read config from in: /tmp/ecc_context_ecc_cfg_1_w2uetz9e/post_ecc.ini 2026-03-07 00:06:53,652 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w2uetz9e/solo_L1_stix-cal-energy_20231213_V03_ecc_in.fits 2026-03-07 00:16:35,469 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231213_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231213_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 00:16:41,635 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 00:16:41,642 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w2uetz9e 2026-03-07 00:16:41,666 Soop found: SOOP 2026-03-07 00:16:41,762 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/13/CAL/solo_CAL_stix-cal-energy_20231213T121241-20231213T143640_V02.fits 2026-03-07 00:16:41,923 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__da6xv3b 2026-03-07 00:16:41,924 Read config from in: /tmp/ecc_context_ecc_cfg_1__da6xv3b/post_ecc.ini 2026-03-07 00:16:43,160 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__da6xv3b/solo_L1_stix-cal-energy_20231215_V03_ecc_in.fits 2026-03-07 00:26:24,763 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231215_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231215_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 00:26:31,647 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 00:26:31,656 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__da6xv3b 2026-03-07 00:26:31,685 Soop found: SOOP 2026-03-07 00:26:31,787 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/15/CAL/solo_CAL_stix-cal-energy_20231215T121252-20231215T143652_V02.fits 2026-03-07 00:26:31,952 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_evuqoyc3 2026-03-07 00:26:31,952 Read config from in: /tmp/ecc_context_ecc_cfg_1_evuqoyc3/post_ecc.ini 2026-03-07 00:26:33,228 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_evuqoyc3/solo_L1_stix-cal-energy_20231204_V03_ecc_in.fits 2026-03-07 00:36:05,224 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231204_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231204_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 00:36:11,393 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 00:36:11,400 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_evuqoyc3 2026-03-07 00:36:11,426 Soop found: SOOP 2026-03-07 00:36:11,526 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/12/04/CAL/solo_CAL_stix-cal-energy_20231204T002201-20231204T025223_V02.fits 2026-03-07 00:36:11,692 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ux1c0nmp 2026-03-07 00:36:11,692 Read config from in: /tmp/ecc_context_ecc_cfg_1_ux1c0nmp/post_ecc.ini 2026-03-07 00:36:12,943 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ux1c0nmp/solo_L1_stix-cal-energy_20231130_V03_ecc_in.fits 2026-03-07 00:45:59,235 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231130_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231130_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 00:46:05,415 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 00:46:05,421 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ux1c0nmp 2026-03-07 00:46:05,449 Soop found: SOOP 2026-03-07 00:46:05,550 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/30/CAL/solo_CAL_stix-cal-energy_20231130T081606-20231130T104006_V02.fits 2026-03-07 00:46:05,709 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kekuchzf 2026-03-07 00:46:05,710 Read config from in: /tmp/ecc_context_ecc_cfg_1_kekuchzf/post_ecc.ini 2026-03-07 00:46:06,956 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kekuchzf/solo_L1_stix-cal-energy_20231110_V03_ecc_in.fits 2026-03-07 00:55:32,148 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231110_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231110_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 00:55:39,877 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 00:55:39,884 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kekuchzf 2026-03-07 00:55:39,909 Soop found: SOOP 2026-03-07 00:55:40,005 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/10/CAL/solo_CAL_stix-cal-energy_20231110T021604-20231110T044007_V02.fits 2026-03-07 00:55:40,453 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h52a58os 2026-03-07 00:55:40,453 Read config from in: /tmp/ecc_context_ecc_cfg_1_h52a58os/post_ecc.ini 2026-03-07 00:55:41,691 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h52a58os/solo_L1_stix-cal-energy_20231101_V03_ecc_in.fits 2026-03-07 01:04:55,539 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 01:05:01,680 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 01:05:01,687 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h52a58os 2026-03-07 01:05:01,713 Soop found: SOOP 2026-03-07 01:05:01,809 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/01/CAL/solo_CAL_stix-cal-energy_20231101T020441-20231101T042841_V02.fits 2026-03-07 01:05:01,972 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ui1owbig 2026-03-07 01:05:01,972 Read config from in: /tmp/ecc_context_ecc_cfg_1_ui1owbig/post_ecc.ini 2026-03-07 01:05:03,205 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ui1owbig/solo_L1_stix-cal-energy_20231124_V03_ecc_in.fits 2026-03-07 01:14:27,780 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 01:14:34,018 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 01:14:34,025 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ui1owbig 2026-03-07 01:14:34,050 Soop found: SOOP 2026-03-07 01:14:34,149 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/24/CAL/solo_CAL_stix-cal-energy_20231124T065218-20231124T091618_V02.fits 2026-03-07 01:14:34,589 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rd8v8b1j 2026-03-07 01:14:34,589 Read config from in: /tmp/ecc_context_ecc_cfg_1_rd8v8b1j/post_ecc.ini 2026-03-07 01:14:35,831 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rd8v8b1j/solo_L1_stix-cal-energy_20231108_V03_ecc_in.fits 2026-03-07 01:24:07,080 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231108_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231108_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 01:24:13,367 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 01:24:13,380 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rd8v8b1j 2026-03-07 01:24:13,436 Soop found: SOOP 2026-03-07 01:24:13,561 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/08/CAL/solo_CAL_stix-cal-energy_20231108T021308-20231108T043710_V02.fits 2026-03-07 01:24:13,752 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_685givdp 2026-03-07 01:24:13,753 Read config from in: /tmp/ecc_context_ecc_cfg_1_685givdp/post_ecc.ini 2026-03-07 01:24:15,086 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_685givdp/solo_L1_stix-cal-energy_20231105_V03_ecc_in.fits 2026-03-07 01:33:51,219 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231105_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231105_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 01:33:57,411 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 01:33:57,418 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_685givdp 2026-03-07 01:33:57,452 Soop found: SOOP 2026-03-07 01:33:57,555 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/05/CAL/solo_CAL_stix-cal-energy_20231105T002201-20231105T024803_V02.fits 2026-03-07 01:33:57,717 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_enbw1efv 2026-03-07 01:33:57,717 Read config from in: /tmp/ecc_context_ecc_cfg_1_enbw1efv/post_ecc.ini 2026-03-07 01:33:58,959 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_enbw1efv/solo_L1_stix-cal-energy_20231114_V03_ecc_in.fits 2026-03-07 01:43:24,673 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 01:43:30,808 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 01:43:30,815 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_enbw1efv 2026-03-07 01:43:30,840 Soop found: SOOP 2026-03-07 01:43:30,840 Soop found: SOOP 2026-03-07 01:43:30,936 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/14/CAL/solo_CAL_stix-cal-energy_20231114T033454-20231114T055854_V02.fits 2026-03-07 01:43:31,100 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_60gpu55l 2026-03-07 01:43:31,101 Read config from in: /tmp/ecc_context_ecc_cfg_1_60gpu55l/post_ecc.ini 2026-03-07 01:43:32,347 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_60gpu55l/solo_L1_stix-cal-energy_20231107_V03_ecc_in.fits 2026-03-07 01:52:53,271 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231107_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231107_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 01:53:00,921 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 01:53:00,927 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_60gpu55l 2026-03-07 01:53:00,952 Soop found: SOOP 2026-03-07 01:53:01,045 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/07/CAL/solo_CAL_stix-cal-energy_20231107T020527-20231107T042931_V02.fits 2026-03-07 01:53:01,203 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lw_7sxss 2026-03-07 01:53:01,203 Read config from in: /tmp/ecc_context_ecc_cfg_1_lw_7sxss/post_ecc.ini 2026-03-07 01:53:02,439 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lw_7sxss/solo_L1_stix-cal-energy_20231120_V03_ecc_in.fits 2026-03-07 02:02:29,600 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231120_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231120_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 02:02:35,830 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 02:02:35,837 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lw_7sxss 2026-03-07 02:02:35,860 Soop found: SOOP 2026-03-07 02:02:35,960 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/20/CAL/solo_CAL_stix-cal-energy_20231120T065154-20231120T091554_V02.fits 2026-03-07 02:02:36,119 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mofvd5m2 2026-03-07 02:02:36,120 Read config from in: /tmp/ecc_context_ecc_cfg_1_mofvd5m2/post_ecc.ini 2026-03-07 02:02:37,363 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mofvd5m2/solo_L1_stix-cal-energy_20231106_V03_ecc_in.fits 2026-03-07 02:12:00,459 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231106_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231106_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 02:12:06,740 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 02:12:06,748 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mofvd5m2 2026-03-07 02:12:06,781 Soop found: SOOP 2026-03-07 02:12:06,877 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/06/CAL/solo_CAL_stix-cal-energy_20231106T020522-20231106T042921_V02.fits 2026-03-07 02:12:07,040 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gardltp9 2026-03-07 02:12:07,040 Read config from in: /tmp/ecc_context_ecc_cfg_1_gardltp9/post_ecc.ini 2026-03-07 02:12:08,287 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gardltp9/solo_L1_stix-cal-energy_20231103_V03_ecc_in.fits 2026-03-07 02:21:51,615 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231103_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231103_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 02:21:57,814 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 02:21:57,823 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gardltp9 2026-03-07 02:21:57,855 Soop found: SOOP 2026-03-07 02:21:57,955 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/03/CAL/solo_CAL_stix-cal-energy_20231103T020454-20231103T042854_V02.fits 2026-03-07 02:21:58,391 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p7o6qv0t 2026-03-07 02:21:58,392 Read config from in: /tmp/ecc_context_ecc_cfg_1_p7o6qv0t/post_ecc.ini 2026-03-07 02:21:59,632 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p7o6qv0t/solo_L1_stix-cal-energy_20231117_V03_ecc_in.fits 2026-03-07 02:31:24,704 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231117_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231117_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 02:31:30,859 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 02:31:30,866 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p7o6qv0t 2026-03-07 02:31:30,891 Soop found: SOOP 2026-03-07 02:31:30,988 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/17/CAL/solo_CAL_stix-cal-energy_20231117T033857-20231117T060256_V02.fits 2026-03-07 02:31:31,424 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m02ozf63 2026-03-07 02:31:31,425 Read config from in: /tmp/ecc_context_ecc_cfg_1_m02ozf63/post_ecc.ini 2026-03-07 02:31:32,684 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m02ozf63/solo_L1_stix-cal-energy_20231118_V03_ecc_in.fits 2026-03-07 02:41:08,211 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231118_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231118_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 02:41:15,808 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 02:41:15,821 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m02ozf63 2026-03-07 02:41:15,846 Soop found: SOOP 2026-03-07 02:41:15,942 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/18/CAL/solo_CAL_stix-cal-energy_20231118T033903-20231118T060302_V02.fits 2026-03-07 02:41:16,103 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e4xhv710 2026-03-07 02:41:16,104 Read config from in: /tmp/ecc_context_ecc_cfg_1_e4xhv710/post_ecc.ini 2026-03-07 02:41:17,339 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e4xhv710/solo_L1_stix-cal-energy_20231123_V03_ecc_in.fits 2026-03-07 02:50:53,655 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231123_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231123_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 02:50:59,844 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 02:50:59,852 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e4xhv710 2026-03-07 02:50:59,877 Soop found: SOOP 2026-03-07 02:50:59,975 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/23/CAL/solo_CAL_stix-cal-energy_20231123T065212-20231123T091612_V02.fits 2026-03-07 02:51:00,135 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1lxnvqx5 2026-03-07 02:51:00,135 Read config from in: /tmp/ecc_context_ecc_cfg_1_1lxnvqx5/post_ecc.ini 2026-03-07 02:51:01,372 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1lxnvqx5/solo_L1_stix-cal-energy_20231116_V03_ecc_in.fits 2026-03-07 03:00:45,411 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231116_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231116_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 03:00:51,573 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 03:00:51,579 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1lxnvqx5 2026-03-07 03:00:51,610 Soop found: SOOP 2026-03-07 03:00:51,716 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/16/CAL/solo_CAL_stix-cal-energy_20231116T033507-20231116T055910_V02.fits 2026-03-07 03:00:51,877 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vkq5bmtm 2026-03-07 03:00:51,878 Read config from in: /tmp/ecc_context_ecc_cfg_1_vkq5bmtm/post_ecc.ini 2026-03-07 03:00:53,114 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vkq5bmtm/solo_L1_stix-cal-energy_20231121_V03_ecc_in.fits 2026-03-07 03:10:15,790 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231121_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231121_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 03:10:21,965 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 03:10:21,972 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vkq5bmtm 2026-03-07 03:10:21,998 Soop found: SOOP 2026-03-07 03:10:22,094 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/21/CAL/solo_CAL_stix-cal-energy_20231121T065201-20231121T091601_V02.fits 2026-03-07 03:10:22,253 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s5nkaku_ 2026-03-07 03:10:22,254 Read config from in: /tmp/ecc_context_ecc_cfg_1_s5nkaku_/post_ecc.ini 2026-03-07 03:10:23,565 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s5nkaku_/solo_L1_stix-cal-energy_20231112_V03_ecc_in.fits 2026-03-07 03:19:58,433 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231112_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231112_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 03:20:04,659 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 03:20:04,666 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s5nkaku_ 2026-03-07 03:20:04,695 Soop found: SOOP 2026-03-07 03:20:04,797 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/12/CAL/solo_CAL_stix-cal-energy_20231112T022956-20231112T045423_V02.fits 2026-03-07 03:20:04,981 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_llxhw0hs 2026-03-07 03:20:04,982 Read config from in: /tmp/ecc_context_ecc_cfg_1_llxhw0hs/post_ecc.ini 2026-03-07 03:20:06,235 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_llxhw0hs/solo_L1_stix-cal-energy_20231127_V03_ecc_in.fits 2026-03-07 03:29:45,491 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231127_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231127_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 03:29:51,607 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 03:29:51,613 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_llxhw0hs 2026-03-07 03:29:51,639 Soop found: SOOP 2026-03-07 03:29:51,734 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/27/CAL/solo_CAL_stix-cal-energy_20231127T081545-20231127T103945_V02.fits 2026-03-07 03:29:51,902 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fbz60rvj 2026-03-07 03:29:51,902 Read config from in: /tmp/ecc_context_ecc_cfg_1_fbz60rvj/post_ecc.ini 2026-03-07 03:29:53,137 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fbz60rvj/solo_L1_stix-cal-energy_20231111_V03_ecc_in.fits 2026-03-07 03:39:16,965 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231111_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231111_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 03:39:24,537 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 03:39:24,543 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fbz60rvj 2026-03-07 03:39:24,567 Soop found: SOOP 2026-03-07 03:39:24,659 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/11/CAL/solo_CAL_stix-cal-energy_20231111T021645-20231111T044101_V02.fits 2026-03-07 03:39:25,091 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xg4_mp38 2026-03-07 03:39:25,092 Read config from in: /tmp/ecc_context_ecc_cfg_1_xg4_mp38/post_ecc.ini 2026-03-07 03:39:26,331 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xg4_mp38/solo_L1_stix-cal-energy_20231126_V03_ecc_in.fits 2026-03-07 03:49:04,712 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231126_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231126_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 03:49:10,877 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 03:49:10,883 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xg4_mp38 2026-03-07 03:49:10,909 Soop found: SOOP 2026-03-07 03:49:11,007 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/26/CAL/solo_CAL_stix-cal-energy_20231126T065230-20231126T091737_V02.fits 2026-03-07 03:49:11,163 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_186bxnp4 2026-03-07 03:49:11,163 Read config from in: /tmp/ecc_context_ecc_cfg_1_186bxnp4/post_ecc.ini 2026-03-07 03:49:12,408 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_186bxnp4/solo_L1_stix-cal-energy_20231119_V03_ecc_in.fits 2026-03-07 03:58:46,098 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231119_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231119_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 03:58:52,246 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 03:58:52,253 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_186bxnp4 2026-03-07 03:58:52,278 Soop found: SOOP 2026-03-07 03:58:52,371 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/19/CAL/solo_CAL_stix-cal-energy_20231119T033909-20231119T061620_V02.fits 2026-03-07 03:58:52,757 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ozdghg55 2026-03-07 03:58:52,757 Read config from in: /tmp/ecc_context_ecc_cfg_1_ozdghg55/post_ecc.ini 2026-03-07 03:58:54,001 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ozdghg55/solo_L1_stix-cal-energy_20231122_V03_ecc_in.fits 2026-03-07 04:08:23,251 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231122_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231122_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 04:08:29,460 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 04:08:29,467 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ozdghg55 2026-03-07 04:08:29,491 Soop found: SOOP 2026-03-07 04:08:29,588 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/22/CAL/solo_CAL_stix-cal-energy_20231122T065207-20231122T091606_V02.fits 2026-03-07 04:08:30,022 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__9vai6n3 2026-03-07 04:08:30,022 Read config from in: /tmp/ecc_context_ecc_cfg_1__9vai6n3/post_ecc.ini 2026-03-07 04:08:31,269 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__9vai6n3/solo_L1_stix-cal-energy_20231125_V03_ecc_in.fits 2026-03-07 04:18:10,621 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231125_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231125_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 04:18:16,874 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 04:18:16,882 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__9vai6n3 2026-03-07 04:18:16,912 Soop found: SOOP 2026-03-07 04:18:17,012 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/25/CAL/solo_CAL_stix-cal-energy_20231125T065224-20231125T091623_V02.fits 2026-03-07 04:18:17,173 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3uvi7_2h 2026-03-07 04:18:17,174 Read config from in: /tmp/ecc_context_ecc_cfg_1_3uvi7_2h/post_ecc.ini 2026-03-07 04:18:18,417 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3uvi7_2h/solo_L1_stix-cal-energy_20231128_V03_ecc_in.fits 2026-03-07 04:27:49,626 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231128_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231128_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 04:27:55,874 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 04:27:55,882 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3uvi7_2h 2026-03-07 04:27:55,907 Soop found: SOOP 2026-03-07 04:27:56,016 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/28/CAL/solo_CAL_stix-cal-energy_20231128T081552-20231128T103951_V02.fits 2026-03-07 04:27:56,180 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cy683b6b 2026-03-07 04:27:56,181 Read config from in: /tmp/ecc_context_ecc_cfg_1_cy683b6b/post_ecc.ini 2026-03-07 04:27:58,784 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cy683b6b/solo_L1_stix-cal-energy_20231109_V03_ecc_in.fits 2026-03-07 04:37:30,699 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231109_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231109_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 04:37:36,900 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 04:37:36,907 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cy683b6b 2026-03-07 04:37:36,933 Soop found: SOOP 2026-03-07 04:37:37,028 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/09/CAL/solo_CAL_stix-cal-energy_20231109T021558-20231109T043958_V02.fits 2026-03-07 04:37:37,189 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pclhwzr0 2026-03-07 04:37:37,190 Read config from in: /tmp/ecc_context_ecc_cfg_1_pclhwzr0/post_ecc.ini 2026-03-07 04:37:38,416 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pclhwzr0/solo_L1_stix-cal-energy_20231129_V03_ecc_in.fits 2026-03-07 04:47:02,395 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231129_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231129_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 04:47:08,545 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 04:47:08,552 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pclhwzr0 2026-03-07 04:47:08,578 Soop found: SOOP 2026-03-07 04:47:08,672 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/29/CAL/solo_CAL_stix-cal-energy_20231129T081558-20231129T103957_V02.fits 2026-03-07 04:47:08,831 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q1r69_0j 2026-03-07 04:47:08,831 Read config from in: /tmp/ecc_context_ecc_cfg_1_q1r69_0j/post_ecc.ini 2026-03-07 04:47:10,069 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q1r69_0j/solo_L1_stix-cal-energy_20231102_V03_ecc_in.fits 2026-03-07 04:56:51,535 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231102_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231102_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 04:56:57,912 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 04:56:57,919 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q1r69_0j 2026-03-07 04:56:57,944 Soop found: SOOP 2026-03-07 04:56:58,047 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/02/CAL/solo_CAL_stix-cal-energy_20231102T020448-20231102T042848_V02.fits 2026-03-07 04:56:58,474 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hbj6d3f4 2026-03-07 04:56:58,475 Read config from in: /tmp/ecc_context_ecc_cfg_1_hbj6d3f4/post_ecc.ini 2026-03-07 04:56:59,729 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hbj6d3f4/solo_L1_stix-cal-energy_20231113_V03_ecc_in.fits 2026-03-07 05:06:38,784 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231113_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231113_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 05:06:44,954 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 05:06:44,961 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hbj6d3f4 2026-03-07 05:06:44,986 Soop found: SOOP 2026-03-07 05:06:45,082 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/13/CAL/solo_CAL_stix-cal-energy_20231113T033448-20231113T055848_V02.fits 2026-03-07 05:06:45,239 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x8kyzq60 2026-03-07 05:06:45,239 Read config from in: /tmp/ecc_context_ecc_cfg_1_x8kyzq60/post_ecc.ini 2026-03-07 05:06:46,480 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x8kyzq60/solo_L1_stix-cal-energy_20231115_V03_ecc_in.fits 2026-03-07 05:16:17,238 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231115_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231115_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 05:16:23,338 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 05:16:23,345 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x8kyzq60 2026-03-07 05:16:23,372 Soop found: SOOP 2026-03-07 05:16:23,470 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/15/CAL/solo_CAL_stix-cal-energy_20231115T033501-20231115T055901_V02.fits 2026-03-07 05:16:23,630 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_174_zsrj 2026-03-07 05:16:23,630 Read config from in: /tmp/ecc_context_ecc_cfg_1_174_zsrj/post_ecc.ini 2026-03-07 05:16:24,878 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_174_zsrj/solo_L1_stix-cal-energy_20231104_V03_ecc_in.fits 2026-03-07 05:26:00,774 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20231104_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20231104_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20231104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20231104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 05:26:08,399 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 05:26:08,425 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_174_zsrj 2026-03-07 05:26:08,452 Soop found: SOOP 2026-03-07 05:26:08,452 Soop found: SOOP 2026-03-07 05:26:08,550 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/11/04/CAL/solo_CAL_stix-cal-energy_20231104T020500-20231104T041630_V02.fits 2026-03-07 05:26:08,707 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1mlqgr0a 2026-03-07 05:26:08,707 Read config from in: /tmp/ecc_context_ecc_cfg_1_1mlqgr0a/post_ecc.ini 2026-03-07 05:26:09,944 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1mlqgr0a/solo_L1_stix-cal-energy_20230930_V03_ecc_in.fits 2026-03-07 05:35:35,416 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230930_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230930_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230930_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230930_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 96 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 05:35:41,506 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 05:35:41,509 ECC result Gain_Cor 0.0 for DET 9 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,509 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,509 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,509 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,509 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,509 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,509 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,509 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,510 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,510 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,510 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,510 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 05:35:41,516 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1mlqgr0a 2026-03-07 05:35:41,539 Soop found: SOOP 2026-03-07 05:35:41,638 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/30/CAL/solo_CAL_stix-cal-energy_20230930T001238-20230930T024059_V02.fits 2026-03-07 05:35:41,792 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qfwj7_y_ 2026-03-07 05:35:41,792 Read config from in: /tmp/ecc_context_ecc_cfg_1_qfwj7_y_/post_ecc.ini 2026-03-07 05:35:43,017 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qfwj7_y_/solo_L1_stix-cal-energy_20230910_V03_ecc_in.fits 2026-03-07 05:45:09,646 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230910_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230910_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230910_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230910_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 05:45:15,740 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 05:45:15,747 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qfwj7_y_ 2026-03-07 05:45:15,770 No soops found for time: 2023-09-10 02:05:41.645029 - 2023-09-10 04:29:41.660547 2026-03-07 05:45:15,867 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/10/CAL/solo_CAL_stix-cal-energy_20230910T020541-20230910T042941_V02.fits 2026-03-07 05:45:16,025 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3taqgklw 2026-03-07 05:45:16,025 Read config from in: /tmp/ecc_context_ecc_cfg_1_3taqgklw/post_ecc.ini 2026-03-07 05:45:17,257 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3taqgklw/solo_L1_stix-cal-energy_20230901_V03_ecc_in.fits 2026-03-07 05:54:48,507 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230901_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230901_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230901_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230901_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 05:54:54,694 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 05:54:54,703 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3taqgklw 2026-03-07 05:54:54,732 No soops found for time: 2023-09-01 03:00:56.254353 - 2023-09-01 05:24:56.269871 2026-03-07 05:54:54,831 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/01/CAL/solo_CAL_stix-cal-energy_20230901T030056-20230901T052456_V02.fits 2026-03-07 05:54:54,989 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0wx0dptc 2026-03-07 05:54:54,989 Read config from in: /tmp/ecc_context_ecc_cfg_1_0wx0dptc/post_ecc.ini 2026-03-07 05:54:56,238 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0wx0dptc/solo_L1_stix-cal-energy_20230924_V03_ecc_in.fits 2026-03-07 06:05:23,938 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230924_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230924_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230924_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230924_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 06:05:30,095 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 06:05:30,102 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0wx0dptc 2026-03-07 06:05:30,126 No soops found for time: 2023-09-24 02:08:46.842600 - 2023-09-24 04:19:53.856866 2026-03-07 06:05:30,223 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/24/CAL/solo_CAL_stix-cal-energy_20230924T020846-20230924T041953_V02.fits 2026-03-07 06:05:30,654 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2o06gwa7 2026-03-07 06:05:30,655 Read config from in: /tmp/ecc_context_ecc_cfg_1_2o06gwa7/post_ecc.ini 2026-03-07 06:05:31,894 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2o06gwa7/solo_L1_stix-cal-energy_20230908_V03_ecc_in.fits 2026-03-07 06:18:36,467 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230908_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230908_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230908_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230908_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 06:18:42,623 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 06:18:42,630 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2o06gwa7 2026-03-07 06:18:42,654 No soops found for time: 2023-09-08 02:04:48.334571 - 2023-09-08 04:28:50.350093 2026-03-07 06:18:42,747 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/08/CAL/solo_CAL_stix-cal-energy_20230908T020448-20230908T042850_V02.fits 2026-03-07 06:18:42,903 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dfk_i_vp 2026-03-07 06:18:42,904 Read config from in: /tmp/ecc_context_ecc_cfg_1_dfk_i_vp/post_ecc.ini 2026-03-07 06:18:44,147 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dfk_i_vp/solo_L1_stix-cal-energy_20230905_V03_ecc_in.fits 2026-03-07 06:28:27,425 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230905_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230905_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230905_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230905_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 06:28:35,054 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 06:28:35,063 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dfk_i_vp 2026-03-07 06:28:35,087 No soops found for time: 2023-09-05 01:42:08.866586 - 2023-09-05 04:08:06.882316 2026-03-07 06:28:35,180 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/05/CAL/solo_CAL_stix-cal-energy_20230905T014208-20230905T040806_V02.fits 2026-03-07 06:28:35,336 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_raf75dzt 2026-03-07 06:28:35,336 Read config from in: /tmp/ecc_context_ecc_cfg_1_raf75dzt/post_ecc.ini 2026-03-07 06:28:36,575 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_raf75dzt/solo_L1_stix-cal-energy_20230914_V03_ecc_in.fits 2026-03-07 06:38:04,147 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230914_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230914_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230914_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230914_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 06:38:10,281 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 06:38:10,288 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_raf75dzt 2026-03-07 06:38:10,312 Soop found: SOOP 2026-03-07 06:38:10,406 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/14/CAL/solo_CAL_stix-cal-energy_20230914T020736-20230914T043136_V02.fits 2026-03-07 06:38:10,833 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lanyt251 2026-03-07 06:38:10,833 Read config from in: /tmp/ecc_context_ecc_cfg_1_lanyt251/post_ecc.ini 2026-03-07 06:38:12,070 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lanyt251/solo_L1_stix-cal-energy_20230907_V03_ecc_in.fits 2026-03-07 06:47:42,823 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230907_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230907_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230907_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230907_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 06:47:48,952 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 06:47:48,959 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lanyt251 2026-03-07 06:47:48,984 No soops found for time: 2023-09-07 02:04:41.179377 - 2023-09-07 04:28:41.194895 2026-03-07 06:47:49,078 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/07/CAL/solo_CAL_stix-cal-energy_20230907T020441-20230907T042841_V02.fits 2026-03-07 06:47:49,233 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4bwmzad8 2026-03-07 06:47:49,234 Read config from in: /tmp/ecc_context_ecc_cfg_1_4bwmzad8/post_ecc.ini 2026-03-07 06:47:50,476 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4bwmzad8/solo_L1_stix-cal-energy_20230920_V03_ecc_in.fits 2026-03-07 06:57:22,758 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230920_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230920_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230920_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230920_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 06:57:28,922 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 06:57:28,929 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4bwmzad8 2026-03-07 06:57:28,953 No soops found for time: 2023-09-20 02:08:15.215851 - 2023-09-20 04:32:15.231518 2026-03-07 06:57:29,051 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/20/CAL/solo_CAL_stix-cal-energy_20230920T020815-20230920T043215_V02.fits 2026-03-07 06:57:29,480 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_comu7gnu 2026-03-07 06:57:29,481 Read config from in: /tmp/ecc_context_ecc_cfg_1_comu7gnu/post_ecc.ini 2026-03-07 06:57:30,724 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_comu7gnu/solo_L1_stix-cal-energy_20230906_V03_ecc_in.fits 2026-03-07 07:06:54,094 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230906_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230906_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230906_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230906_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 07:07:00,237 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 07:07:00,244 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_comu7gnu 2026-03-07 07:07:00,268 No soops found for time: 2023-09-06 02:04:35.024185 - 2023-09-06 04:28:35.039703 2026-03-07 07:07:00,362 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/06/CAL/solo_CAL_stix-cal-energy_20230906T020435-20230906T042835_V02.fits 2026-03-07 07:07:00,749 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xae0s4rg 2026-03-07 07:07:00,749 Read config from in: /tmp/ecc_context_ecc_cfg_1_xae0s4rg/post_ecc.ini 2026-03-07 07:07:01,991 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xae0s4rg/solo_L1_stix-cal-energy_20230903_V03_ecc_in.fits 2026-03-07 07:16:28,528 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230903_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230903_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230903_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230903_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 07:16:35,491 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 07:16:35,499 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xae0s4rg 2026-03-07 07:16:35,527 No soops found for time: 2023-09-03 03:01:11.564743 - 2023-09-03 05:07:04.578308 2026-03-07 07:16:35,629 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/03/CAL/solo_CAL_stix-cal-energy_20230903T030111-20230903T050704_V02.fits 2026-03-07 07:16:35,798 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sa_x4dtj 2026-03-07 07:16:35,799 Read config from in: /tmp/ecc_context_ecc_cfg_1_sa_x4dtj/post_ecc.ini 2026-03-07 07:16:38,589 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sa_x4dtj/solo_L1_stix-cal-energy_20230917_V03_ecc_in.fits 2026-03-07 07:26:06,681 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230917_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230917_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230917_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230917_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 07:26:12,892 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 07:26:12,900 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sa_x4dtj 2026-03-07 07:26:12,926 No soops found for time: 2023-09-17 02:07:54.745795 - 2023-09-17 04:31:53.761461 2026-03-07 07:26:13,027 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/17/CAL/solo_CAL_stix-cal-energy_20230917T020754-20230917T043153_V02.fits 2026-03-07 07:26:13,186 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qrqc98vh 2026-03-07 07:26:13,187 Read config from in: /tmp/ecc_context_ecc_cfg_1_qrqc98vh/post_ecc.ini 2026-03-07 07:26:14,438 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qrqc98vh/solo_L1_stix-cal-energy_20230918_V03_ecc_in.fits 2026-03-07 07:35:40,442 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230918_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230918_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230918_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230918_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 07:35:46,640 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 07:35:46,650 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qrqc98vh 2026-03-07 07:35:46,683 No soops found for time: 2023-09-18 02:08:03.902485 - 2023-09-18 04:32:02.918150 2026-03-07 07:35:46,778 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/18/CAL/solo_CAL_stix-cal-energy_20230918T020803-20230918T043202_V02.fits 2026-03-07 07:35:46,936 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_po3zjfh0 2026-03-07 07:35:46,936 Read config from in: /tmp/ecc_context_ecc_cfg_1_po3zjfh0/post_ecc.ini 2026-03-07 07:35:48,199 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_po3zjfh0/solo_L1_stix-cal-energy_20230923_V03_ecc_in.fits 2026-03-07 07:45:17,787 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230923_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230923_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230923_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230923_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 07:45:23,972 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 07:45:23,979 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_po3zjfh0 2026-03-07 07:45:24,003 No soops found for time: 2023-09-23 02:08:40.685916 - 2023-09-23 04:32:40.701583 2026-03-07 07:45:24,097 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/23/CAL/solo_CAL_stix-cal-energy_20230923T020840-20230923T043240_V02.fits 2026-03-07 07:45:24,259 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__rg_6tk4 2026-03-07 07:45:24,259 Read config from in: /tmp/ecc_context_ecc_cfg_1__rg_6tk4/post_ecc.ini 2026-03-07 07:45:25,505 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__rg_6tk4/solo_L1_stix-cal-energy_20230916_V03_ecc_in.fits 2026-03-07 07:54:54,681 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230916_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230916_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230916_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230916_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 07:55:00,823 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 07:55:00,830 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__rg_6tk4 2026-03-07 07:55:00,855 No soops found for time: 2023-09-16 02:07:48.588128 - 2023-09-16 04:31:48.603766 2026-03-07 07:55:00,949 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/16/CAL/solo_CAL_stix-cal-energy_20230916T020748-20230916T043148_V02.fits 2026-03-07 07:55:01,106 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yf24yqjd 2026-03-07 07:55:01,107 Read config from in: /tmp/ecc_context_ecc_cfg_1_yf24yqjd/post_ecc.ini 2026-03-07 07:55:02,353 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yf24yqjd/solo_L1_stix-cal-energy_20230921_V03_ecc_in.fits 2026-03-07 08:04:37,311 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230921_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230921_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230921_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230921_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 08:04:43,597 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 08:04:43,613 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yf24yqjd 2026-03-07 08:04:43,646 No soops found for time: 2023-09-21 02:08:21.372535 - 2023-09-21 04:32:21.388202 2026-03-07 08:04:43,752 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/21/CAL/solo_CAL_stix-cal-energy_20230921T020821-20230921T043221_V02.fits 2026-03-07 08:04:43,928 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rfgh2yvp 2026-03-07 08:04:43,929 Read config from in: /tmp/ecc_context_ecc_cfg_1_rfgh2yvp/post_ecc.ini 2026-03-07 08:04:45,226 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rfgh2yvp/solo_L1_stix-cal-energy_20230912_V03_ecc_in.fits 2026-03-07 08:14:21,200 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230912_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230912_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230912_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230912_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 08:14:29,668 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 08:14:29,681 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rfgh2yvp 2026-03-07 08:14:29,710 No soops found for time: 2023-09-12 02:05:53.962391 - 2023-09-12 04:29:58.978038 2026-03-07 08:14:29,811 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/12/CAL/solo_CAL_stix-cal-energy_20230912T020553-20230912T042958_V02.fits 2026-03-07 08:14:29,994 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4gmex56u 2026-03-07 08:14:29,995 Read config from in: /tmp/ecc_context_ecc_cfg_1_4gmex56u/post_ecc.ini 2026-03-07 08:14:31,261 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4gmex56u/solo_L1_stix-cal-energy_20230927_V03_ecc_in.fits 2026-03-07 08:24:24,673 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230927_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230927_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230927_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230927_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 08:24:30,835 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 08:24:30,846 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4gmex56u 2026-03-07 08:24:30,871 Soop found: SOOP 2026-03-07 08:24:30,871 Soop found: SOOP 2026-03-07 08:24:30,966 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/27/CAL/solo_CAL_stix-cal-energy_20230927T000836-20230927T023236_V02.fits 2026-03-07 08:24:31,133 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4wx090c3 2026-03-07 08:24:31,133 Read config from in: /tmp/ecc_context_ecc_cfg_1_4wx090c3/post_ecc.ini 2026-03-07 08:24:32,372 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4wx090c3/solo_L1_stix-cal-energy_20230911_V03_ecc_in.fits 2026-03-07 08:34:11,572 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230911_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230911_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230911_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230911_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 08:34:17,722 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 08:34:17,728 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4wx090c3 2026-03-07 08:34:17,752 No soops found for time: 2023-09-11 02:05:47.805997 - 2023-09-11 04:29:47.821635 2026-03-07 08:34:17,846 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/11/CAL/solo_CAL_stix-cal-energy_20230911T020547-20230911T042947_V02.fits 2026-03-07 08:34:18,002 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ff4otuzq 2026-03-07 08:34:18,003 Read config from in: /tmp/ecc_context_ecc_cfg_1_ff4otuzq/post_ecc.ini 2026-03-07 08:34:19,240 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ff4otuzq/solo_L1_stix-cal-energy_20230926_V03_ecc_in.fits 2026-03-07 08:44:02,693 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230926_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230926_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230926_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230926_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 08:44:08,861 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 08:44:08,869 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ff4otuzq 2026-03-07 08:44:08,894 Soop found: SOOP 2026-03-07 08:44:08,991 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/26/CAL/solo_CAL_stix-cal-energy_20230926T000417-20230926T022829_V02.fits 2026-03-07 08:44:09,418 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jw3yxobd 2026-03-07 08:44:09,419 Read config from in: /tmp/ecc_context_ecc_cfg_1_jw3yxobd/post_ecc.ini 2026-03-07 08:44:10,659 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jw3yxobd/solo_L1_stix-cal-energy_20230919_V03_ecc_in.fits 2026-03-07 08:53:35,590 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230919_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230919_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230919_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230919_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 08:53:42,433 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 08:53:42,440 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jw3yxobd 2026-03-07 08:53:42,467 No soops found for time: 2023-09-19 02:08:10.059169 - 2023-09-19 04:32:09.074834 2026-03-07 08:53:42,568 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/19/CAL/solo_CAL_stix-cal-energy_20230919T020810-20230919T043209_V02.fits 2026-03-07 08:53:42,733 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4pbwaytw 2026-03-07 08:53:42,733 Read config from in: /tmp/ecc_context_ecc_cfg_1_4pbwaytw/post_ecc.ini 2026-03-07 08:53:44,003 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4pbwaytw/solo_L1_stix-cal-energy_20230922_V03_ecc_in.fits 2026-03-07 09:03:12,990 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230922_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230922_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230922_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230922_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 09:03:19,228 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 09:03:19,235 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4pbwaytw 2026-03-07 09:03:19,260 No soops found for time: 2023-09-22 02:08:27.529219 - 2023-09-22 04:32:27.544886 2026-03-07 09:03:19,354 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/22/CAL/solo_CAL_stix-cal-energy_20230922T020827-20230922T043227_V02.fits 2026-03-07 09:03:19,706 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3gnsn4sf 2026-03-07 09:03:19,707 Read config from in: /tmp/ecc_context_ecc_cfg_1_3gnsn4sf/post_ecc.ini 2026-03-07 09:03:20,958 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3gnsn4sf/solo_L1_stix-cal-energy_20230925_V03_ecc_in.fits 2026-03-07 09:12:57,912 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230925_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230925_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230925_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230925_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 09:13:05,922 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 09:13:05,929 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3gnsn4sf 2026-03-07 09:13:05,954 Soop found: SOOP 2026-03-07 09:13:06,049 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/25/CAL/solo_CAL_stix-cal-energy_20230925T000410-20230925T022810_V02.fits 2026-03-07 09:13:06,479 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jmqr12c3 2026-03-07 09:13:06,479 Read config from in: /tmp/ecc_context_ecc_cfg_1_jmqr12c3/post_ecc.ini 2026-03-07 09:13:07,714 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jmqr12c3/solo_L1_stix-cal-energy_20230928_V03_ecc_in.fits 2026-03-07 09:22:36,688 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230928_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230928_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230928_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230928_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 96 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 09:22:42,741 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 09:22:42,744 ECC result Gain_Cor 0.0 for DET 9 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,744 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,744 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,745 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:22:42,750 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jmqr12c3 2026-03-07 09:22:42,774 Soop found: SOOP 2026-03-07 09:22:42,775 Soop found: SOOP 2026-03-07 09:22:42,868 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/28/CAL/solo_CAL_stix-cal-energy_20230928T000842-20230928T023254_V02.fits 2026-03-07 09:22:43,265 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j4ww8p41 2026-03-07 09:22:43,266 Read config from in: /tmp/ecc_context_ecc_cfg_1_j4ww8p41/post_ecc.ini 2026-03-07 09:22:44,525 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j4ww8p41/solo_L1_stix-cal-energy_20230909_V03_ecc_in.fits 2026-03-07 09:32:10,764 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230909_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230909_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230909_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230909_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 09:32:16,893 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 09:32:16,900 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j4ww8p41 2026-03-07 09:32:16,924 No soops found for time: 2023-09-09 02:05:36.489839 - 2023-09-09 04:29:35.505355 2026-03-07 09:32:17,017 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/09/CAL/solo_CAL_stix-cal-energy_20230909T020536-20230909T042935_V02.fits 2026-03-07 09:32:17,176 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n32dmt5n 2026-03-07 09:32:17,177 Read config from in: /tmp/ecc_context_ecc_cfg_1_n32dmt5n/post_ecc.ini 2026-03-07 09:32:18,411 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n32dmt5n/solo_L1_stix-cal-energy_20230929_V03_ecc_in.fits 2026-03-07 09:41:51,766 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230929_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230929_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230929_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230929_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 96 is dead pixel 97 is dead pixel 98 is dead pixel 99 is dead pixel 100 is dead pixel 101 is dead pixel 102 is dead pixel 103 is dead pixel 104 is dead pixel 105 is dead pixel 106 is dead pixel 107 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 09:41:57,909 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 09:41:57,911 ECC result Gain_Cor 0.0 for DET 9 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,911 ECC result Gain_Cor 0.0 for DET 9 PIX 1 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 2 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 3 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 4 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 5 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 6 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 8 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 9 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 10 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,912 ECC result Gain_Cor 0.0 for DET 9 PIX 11 falls below Min_Gain 0.4, but not in ignore list 2026-03-07 09:41:57,917 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n32dmt5n 2026-03-07 09:41:57,944 Soop found: SOOP 2026-03-07 09:41:58,037 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/29/CAL/solo_CAL_stix-cal-energy_20230929T001232-20230929T023632_V02.fits 2026-03-07 09:41:58,194 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jrpdz62t 2026-03-07 09:41:58,194 Read config from in: /tmp/ecc_context_ecc_cfg_1_jrpdz62t/post_ecc.ini 2026-03-07 09:41:59,440 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jrpdz62t/solo_L1_stix-cal-energy_20230902_V03_ecc_in.fits 2026-03-07 09:51:42,223 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230902_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230902_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230902_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230902_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 09:51:48,409 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 09:51:48,417 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jrpdz62t 2026-03-07 09:51:48,441 No soops found for time: 2023-09-02 03:01:05.409551 - 2023-09-02 05:25:05.425069 2026-03-07 09:51:48,535 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/02/CAL/solo_CAL_stix-cal-energy_20230902T030105-20230902T052505_V02.fits 2026-03-07 09:51:48,692 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xa_iij6p 2026-03-07 09:51:48,692 Read config from in: /tmp/ecc_context_ecc_cfg_1_xa_iij6p/post_ecc.ini 2026-03-07 09:51:49,934 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xa_iij6p/solo_L1_stix-cal-energy_20230913_V03_ecc_in.fits 2026-03-07 10:01:15,239 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230913_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230913_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230913_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230913_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 10:01:21,365 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 10:01:21,371 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xa_iij6p 2026-03-07 10:01:21,395 No soops found for time: 2023-09-13 02:07:30.118947 - 2023-09-13 04:31:30.134585 2026-03-07 10:01:21,488 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/13/CAL/solo_CAL_stix-cal-energy_20230913T020730-20230913T043130_V02.fits 2026-03-07 10:01:21,644 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tz8fba3j 2026-03-07 10:01:21,645 Read config from in: /tmp/ecc_context_ecc_cfg_1_tz8fba3j/post_ecc.ini 2026-03-07 10:01:24,274 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tz8fba3j/solo_L1_stix-cal-energy_20230915_V03_ecc_in.fits 2026-03-07 10:11:06,652 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230915_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230915_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230915_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230915_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 10:11:12,819 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 10:11:12,826 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tz8fba3j 2026-03-07 10:11:12,850 No soops found for time: 2023-09-15 02:07:42.431735 - 2023-09-15 04:31:42.447373 2026-03-07 10:11:12,944 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/15/CAL/solo_CAL_stix-cal-energy_20230915T020742-20230915T043142_V02.fits 2026-03-07 10:11:13,103 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4tfnd2ro 2026-03-07 10:11:13,104 Read config from in: /tmp/ecc_context_ecc_cfg_1_4tfnd2ro/post_ecc.ini 2026-03-07 10:11:14,354 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4tfnd2ro/solo_L1_stix-cal-energy_20230904_V03_ecc_in.fits 2026-03-07 10:20:45,014 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230904_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230904_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230904_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230904_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 10:20:51,116 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 10:20:51,123 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4tfnd2ro 2026-03-07 10:20:51,147 No soops found for time: 2023-09-04 00:22:00.702770 - 2023-09-04 02:49:12.718633 2026-03-07 10:20:51,242 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/09/04/CAL/solo_CAL_stix-cal-energy_20230904T002200-20230904T024912_V02.fits 2026-03-07 10:20:51,401 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v0p6zj_p 2026-03-07 10:20:51,401 Read config from in: /tmp/ecc_context_ecc_cfg_1_v0p6zj_p/post_ecc.ini 2026-03-07 10:20:52,634 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v0p6zj_p/solo_L1_stix-cal-energy_20230210_V03_ecc_in.fits 2026-03-07 10:29:48,043 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230210_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230210_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 10:29:54,174 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 10:29:54,181 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v0p6zj_p 2026-03-07 10:29:54,210 No soops found for time: 2023-02-10 00:08:50.279473 - 2023-02-10 02:32:50.294589 2026-03-07 10:29:54,305 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/10/CAL/solo_CAL_stix-cal-energy_20230210T000850-20230210T023250_V02.fits 2026-03-07 10:29:54,468 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2_5vvh5q 2026-03-07 10:29:54,469 Read config from in: /tmp/ecc_context_ecc_cfg_1_2_5vvh5q/post_ecc.ini 2026-03-07 10:29:55,716 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2_5vvh5q/solo_L1_stix-cal-energy_20230201_V03_ecc_in.fits 2026-03-07 10:38:55,716 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230201_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230201_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 10:39:01,836 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 10:39:01,843 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2_5vvh5q 2026-03-07 10:39:01,867 No soops found for time: 2023-02-01 04:08:15.947732 - 2023-02-01 06:32:15.962750 2026-03-07 10:39:01,960 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/01/CAL/solo_CAL_stix-cal-energy_20230201T040815-20230201T063215_V02.fits 2026-03-07 10:39:02,392 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_le_k4_xn 2026-03-07 10:39:02,392 Read config from in: /tmp/ecc_context_ecc_cfg_1_le_k4_xn/post_ecc.ini 2026-03-07 10:39:03,633 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_le_k4_xn/solo_L1_stix-cal-energy_20230224_V03_ecc_in.fits 2026-03-07 10:47:47,454 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230224_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230224_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 10:47:53,566 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 10:47:53,572 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_le_k4_xn 2026-03-07 10:47:53,596 No soops found for time: 2023-02-24 14:38:25.495326 - 2023-02-24 17:02:25.510557 2026-03-07 10:47:53,694 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/24/CAL/solo_CAL_stix-cal-energy_20230224T143825-20230224T170225_V02.fits 2026-03-07 10:47:53,852 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7m4uk1wd 2026-03-07 10:47:53,853 Read config from in: /tmp/ecc_context_ecc_cfg_1_7m4uk1wd/post_ecc.ini 2026-03-07 10:47:55,092 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7m4uk1wd/solo_L1_stix-cal-energy_20230208_V03_ecc_in.fits 2026-03-07 10:56:36,443 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230208_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230208_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 10:56:44,084 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 10:56:44,090 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7m4uk1wd 2026-03-07 10:56:44,114 No soops found for time: 2023-02-08 06:23:54.016362 - 2023-02-08 08:09:30.027403 2026-03-07 10:56:44,211 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/08/CAL/solo_CAL_stix-cal-energy_20230208T062354-20230208T080930_V02.fits 2026-03-07 10:56:44,372 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a3y75s8q 2026-03-07 10:56:44,373 Read config from in: /tmp/ecc_context_ecc_cfg_1_a3y75s8q/post_ecc.ini 2026-03-07 10:56:45,611 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a3y75s8q/solo_L1_stix-cal-energy_20230205_V03_ecc_in.fits 2026-03-07 11:05:40,712 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 11:05:46,802 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 11:05:46,809 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a3y75s8q 2026-03-07 11:05:46,833 No soops found for time: 2023-02-05 03:33:30.546868 - 2023-02-05 05:57:29.561922 2026-03-07 11:05:46,926 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/05/CAL/solo_CAL_stix-cal-energy_20230205T033330-20230205T055729_V02.fits 2026-03-07 11:05:47,082 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u4_0_8tu 2026-03-07 11:05:47,083 Read config from in: /tmp/ecc_context_ecc_cfg_1_u4_0_8tu/post_ecc.ini 2026-03-07 11:05:48,326 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u4_0_8tu/solo_L1_stix-cal-energy_20230214_V03_ecc_in.fits 2026-03-07 11:14:41,252 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230214_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230214_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 11:14:47,716 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 11:14:47,723 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u4_0_8tu 2026-03-07 11:14:47,747 No soops found for time: 2023-02-14 04:43:48.912987 - 2023-02-14 07:07:48.928103 2026-03-07 11:14:47,841 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/14/CAL/solo_CAL_stix-cal-energy_20230214T044348-20230214T070748_V02.fits 2026-03-07 11:14:47,999 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t976m0ty 2026-03-07 11:14:47,999 Read config from in: /tmp/ecc_context_ecc_cfg_1_t976m0ty/post_ecc.ini 2026-03-07 11:14:49,237 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t976m0ty/solo_L1_stix-cal-energy_20230207_V03_ecc_in.fits 2026-03-07 11:23:24,891 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230207_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230207_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 11:23:31,084 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 11:23:31,091 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t976m0ty 2026-03-07 11:23:31,115 No soops found for time: 2023-02-07 06:23:47.865792 - 2023-02-07 08:47:46.880846 2026-03-07 11:23:31,210 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/07/CAL/solo_CAL_stix-cal-energy_20230207T062347-20230207T084746_V02.fits 2026-03-07 11:23:31,369 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w0bf2vyv 2026-03-07 11:23:31,369 Read config from in: /tmp/ecc_context_ecc_cfg_1_w0bf2vyv/post_ecc.ini 2026-03-07 11:23:32,613 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w0bf2vyv/solo_L1_stix-cal-energy_20230220_V03_ecc_in.fits 2026-03-07 11:32:31,664 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 11:32:37,724 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 11:32:37,732 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w0bf2vyv 2026-03-07 11:32:37,757 No soops found for time: 2023-02-20 14:31:43.884522 - 2023-02-20 16:55:42.899688 2026-03-07 11:32:37,857 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/20/CAL/solo_CAL_stix-cal-energy_20230220T143143-20230220T165542_V02.fits 2026-03-07 11:32:38,295 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fzx04lwt 2026-03-07 11:32:38,296 Read config from in: /tmp/ecc_context_ecc_cfg_1_fzx04lwt/post_ecc.ini 2026-03-07 11:32:39,535 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fzx04lwt/solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits 2026-03-07 11:42:48,643 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 11:42:56,517 Run ecc post fit: replaced [98.2 %] gain offset pairs with 'better fits' 2026-03-07 11:42:56,519 ECC result Gain_Prime 1.6156187279004812 for DET 32 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-07 11:42:56,519 ECC result Gain_Prime 0.0 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:42:56,520 ECC result Gain_Prime 0.0 for DET 2 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:42:56,520 ECC result Gain_Prime 0.0 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:42:56,520 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:42:56,520 ECC result Gain_Prime 0.0 for DET 17 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:42:56,520 ECC result Gain_Prime 0.0 for DET 20 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:42:56,524 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fzx04lwt 2026-03-07 11:42:56,555 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j9xkivg6 2026-03-07 11:42:56,555 Read config from in: /tmp/ecc_context_ecc_cfg_1_j9xkivg6/post_ecc.ini 2026-03-07 11:42:59,092 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j9xkivg6/solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits 2026-03-07 11:51:08,920 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 11:51:17,540 Run ecc post fit: replaced [97.4 %] gain offset pairs with 'better fits' 2026-03-07 11:51:17,542 ECC result Gain_Prime 0.0 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,542 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,542 ECC result Gain_Prime 0.0 for DET 16 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,542 ECC result Gain_Prime 0.0 for DET 19 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,542 ECC result Gain_Prime 0.0 for DET 21 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,542 ECC result Gain_Prime 0.0 for DET 23 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,543 ECC result Gain_Prime 0.0 for DET 26 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,543 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,543 ECC result Gain_Prime 0.0 for DET 32 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-07 11:51:17,547 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j9xkivg6 2026-03-07 11:51:17,578 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wnrm4i9f 2026-03-07 11:51:17,578 Read config from in: /tmp/ecc_context_ecc_cfg_1_wnrm4i9f/post_ecc.ini 2026-03-07 11:51:18,822 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wnrm4i9f/solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits 2026-03-07 12:00:09,613 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 12:00:15,920 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 12:00:15,927 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wnrm4i9f 2026-03-07 12:00:15,951 No soops found for time: 2023-02-06 03:37:17.697823 - 2023-02-06 03:43:17.698450 2026-03-07 12:00:16,045 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/06/CAL/solo_CAL_stix-cal-energy_20230206T033717-20230206T034317_V02.fits 2026-03-07 12:00:16,081 No soops found for time: 2023-02-06 04:41:34.704544 - 2023-02-06 04:47:34.705172 2026-03-07 12:00:16,172 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/06/CAL/solo_CAL_stix-cal-energy_20230206T044134-20230206T044734_V02.fits 2026-03-07 12:00:16,209 No soops found for time: 2023-02-06 05:46:41.711353 - 2023-02-06 08:11:03.726447 2026-03-07 12:00:16,301 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/06/CAL/solo_CAL_stix-cal-energy_20230206T054641-20230206T081103_V02.fits 2026-03-07 12:00:16,735 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z63_ow0i 2026-03-07 12:00:16,735 Read config from in: /tmp/ecc_context_ecc_cfg_1_z63_ow0i/post_ecc.ini 2026-03-07 12:00:18,027 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z63_ow0i/solo_L1_stix-cal-energy_20230203_V03_ecc_in.fits 2026-03-07 12:09:13,329 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230203_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230203_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 12:09:19,467 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 12:09:19,475 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z63_ow0i 2026-03-07 12:09:19,500 No soops found for time: 2023-02-03 03:33:21.245732 - 2023-02-03 05:57:20.260786 2026-03-07 12:09:19,594 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/03/CAL/solo_CAL_stix-cal-energy_20230203T033321-20230203T055720_V02.fits 2026-03-07 12:09:19,982 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eptb1h7u 2026-03-07 12:09:19,982 Read config from in: /tmp/ecc_context_ecc_cfg_1_eptb1h7u/post_ecc.ini 2026-03-07 12:09:21,228 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eptb1h7u/solo_L1_stix-cal-energy_20230217_V03_ecc_in.fits 2026-03-07 12:18:19,477 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230217_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230217_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 12:18:26,351 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 12:18:26,359 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eptb1h7u 2026-03-07 12:18:26,388 No soops found for time: 2023-02-17 04:44:07.366505 - 2023-02-17 07:08:06.381620 2026-03-07 12:18:26,495 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/17/CAL/solo_CAL_stix-cal-energy_20230217T044407-20230217T070806_V02.fits 2026-03-07 12:18:26,659 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hi4ruwb8 2026-03-07 12:18:26,660 Read config from in: /tmp/ecc_context_ecc_cfg_1_hi4ruwb8/post_ecc.ini 2026-03-07 12:18:27,931 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hi4ruwb8/solo_L1_stix-cal-energy_20230218_V03_ecc_in.fits 2026-03-07 12:27:32,980 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230218_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230218_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 12:27:39,177 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 12:27:39,184 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hi4ruwb8 2026-03-07 12:27:39,211 No soops found for time: 2023-02-18 04:44:13.519279 - 2023-02-18 07:08:13.534447 2026-03-07 12:27:39,308 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/18/CAL/solo_CAL_stix-cal-energy_20230218T044413-20230218T070813_V02.fits 2026-03-07 12:27:39,463 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_drug0y1g 2026-03-07 12:27:39,464 Read config from in: /tmp/ecc_context_ecc_cfg_1_drug0y1g/post_ecc.ini 2026-03-07 12:27:40,702 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_drug0y1g/solo_L1_stix-cal-energy_20230223_V03_ecc_in.fits 2026-03-07 12:36:33,351 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230223_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230223_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 12:36:39,466 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 12:36:39,472 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_drug0y1g 2026-03-07 12:36:39,498 No soops found for time: 2023-02-23 14:35:38.342729 - 2023-02-23 16:59:38.357960 2026-03-07 12:36:39,593 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/23/CAL/solo_CAL_stix-cal-energy_20230223T143538-20230223T165938_V02.fits 2026-03-07 12:36:41,509 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7u88t2_7 2026-03-07 12:36:41,510 Read config from in: /tmp/ecc_context_ecc_cfg_1_7u88t2_7/post_ecc.ini 2026-03-07 12:36:42,744 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7u88t2_7/solo_L1_stix-cal-energy_20230216_V03_ecc_in.fits 2026-03-07 12:45:29,943 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230216_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230216_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 12:45:36,049 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 12:45:36,055 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7u88t2_7 2026-03-07 12:45:36,079 No soops found for time: 2023-02-16 04:44:01.215333 - 2023-02-16 07:08:00.230447 2026-03-07 12:45:36,177 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/16/CAL/solo_CAL_stix-cal-energy_20230216T044401-20230216T070800_V02.fits 2026-03-07 12:45:36,331 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bbaerp00 2026-03-07 12:45:36,332 Read config from in: /tmp/ecc_context_ecc_cfg_1_bbaerp00/post_ecc.ini 2026-03-07 12:45:37,565 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bbaerp00/solo_L1_stix-cal-energy_20230221_V03_ecc_in.fits 2026-03-07 12:54:20,391 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230221_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230221_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 12:54:26,496 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 12:54:26,503 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bbaerp00 2026-03-07 12:54:26,527 No soops found for time: 2023-02-21 14:31:49.036211 - 2023-02-21 16:55:50.051381 2026-03-07 12:54:26,622 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/21/CAL/solo_CAL_stix-cal-energy_20230221T143149-20230221T165550_V02.fits 2026-03-07 12:54:26,778 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oun7n9vn 2026-03-07 12:54:26,779 Read config from in: /tmp/ecc_context_ecc_cfg_1_oun7n9vn/post_ecc.ini 2026-03-07 12:54:28,017 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oun7n9vn/solo_L1_stix-cal-energy_20230212_V03_ecc_in.fits 2026-03-07 13:03:18,156 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230212_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230212_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 13:03:24,319 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 13:03:24,325 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oun7n9vn 2026-03-07 13:03:24,350 No soops found for time: 2023-02-12 00:33:31.584389 - 2023-02-12 03:12:01.601027 2026-03-07 13:03:24,445 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/12/CAL/solo_CAL_stix-cal-energy_20230212T003331-20230212T031201_V02.fits 2026-03-07 13:03:24,874 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2o18kmlc 2026-03-07 13:03:24,874 Read config from in: /tmp/ecc_context_ecc_cfg_1_2o18kmlc/post_ecc.ini 2026-03-07 13:03:26,122 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2o18kmlc/solo_L1_stix-cal-energy_20230227_V03_ecc_in.fits 2026-03-07 13:12:15,476 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230227_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230227_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 13:12:21,633 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 13:12:21,640 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2o18kmlc 2026-03-07 13:12:21,665 No soops found for time: 2023-02-27 17:49:45.972470 - 2023-02-27 20:13:44.987699 2026-03-07 13:12:21,758 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/27/CAL/solo_CAL_stix-cal-energy_20230227T174945-20230227T201344_V02.fits 2026-03-07 13:12:21,915 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4l1nl3tj 2026-03-07 13:12:21,916 Read config from in: /tmp/ecc_context_ecc_cfg_1_4l1nl3tj/post_ecc.ini 2026-03-07 13:12:23,163 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4l1nl3tj/solo_L1_stix-cal-energy_20230211_V03_ecc_in.fits 2026-03-07 13:21:15,454 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230211_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230211_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 13:21:22,345 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 13:21:22,351 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4l1nl3tj 2026-03-07 13:21:22,379 No soops found for time: 2023-02-11 00:08:57.430647 - 2023-02-11 02:34:52.445965 2026-03-07 13:21:22,479 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/11/CAL/solo_CAL_stix-cal-energy_20230211T000857-20230211T023452_V02.fits 2026-03-07 13:21:22,654 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vwdgo29z 2026-03-07 13:21:22,655 Read config from in: /tmp/ecc_context_ecc_cfg_1_vwdgo29z/post_ecc.ini 2026-03-07 13:21:23,939 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vwdgo29z/solo_L1_stix-cal-energy_20230226_V03_ecc_in.fits 2026-03-07 13:30:18,948 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230226_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230226_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 13:30:26,576 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 13:30:26,583 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vwdgo29z 2026-03-07 13:30:26,607 No soops found for time: 2023-02-26 14:38:37.799952 - 2023-02-26 17:17:33.816762 2026-03-07 13:30:26,701 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/26/CAL/solo_CAL_stix-cal-energy_20230226T143837-20230226T171733_V02.fits 2026-03-07 13:30:26,858 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c7mmrwvr 2026-03-07 13:30:26,859 Read config from in: /tmp/ecc_context_ecc_cfg_1_c7mmrwvr/post_ecc.ini 2026-03-07 13:30:28,095 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c7mmrwvr/solo_L1_stix-cal-energy_20230219_V03_ecc_in.fits 2026-03-07 13:39:18,469 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230219_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230219_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 13:39:24,638 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 13:39:24,645 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c7mmrwvr 2026-03-07 13:39:24,670 No soops found for time: 2023-02-19 04:44:19.670969 - 2023-02-19 06:39:53.683142 2026-03-07 13:39:24,763 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/19/CAL/solo_CAL_stix-cal-energy_20230219T044419-20230219T063953_V02.fits 2026-03-07 13:39:24,916 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_btt1cdxn 2026-03-07 13:39:24,917 Read config from in: /tmp/ecc_context_ecc_cfg_1_btt1cdxn/post_ecc.ini 2026-03-07 13:39:26,157 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_btt1cdxn/solo_L1_stix-cal-energy_20230222_V03_ecc_in.fits 2026-03-07 13:48:17,658 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230222_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230222_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 13:48:23,778 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 13:48:23,786 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_btt1cdxn 2026-03-07 13:48:23,810 No soops found for time: 2023-02-22 14:35:32.190416 - 2023-02-22 16:59:32.205647 2026-03-07 13:48:23,905 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/22/CAL/solo_CAL_stix-cal-energy_20230222T143532-20230222T165932_V02.fits 2026-03-07 13:48:24,297 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_frnxh7v3 2026-03-07 13:48:24,297 Read config from in: /tmp/ecc_context_ecc_cfg_1_frnxh7v3/post_ecc.ini 2026-03-07 13:48:25,539 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_frnxh7v3/solo_L1_stix-cal-energy_20230225_V03_ecc_in.fits 2026-03-07 13:57:20,036 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230225_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230225_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 13:57:26,216 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 13:57:26,222 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_frnxh7v3 2026-03-07 13:57:26,246 No soops found for time: 2023-02-25 14:38:31.647639 - 2023-02-25 17:02:31.662870 2026-03-07 13:57:26,339 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/25/CAL/solo_CAL_stix-cal-energy_20230225T143831-20230225T170231_V02.fits 2026-03-07 13:57:26,493 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wk2hx8nu 2026-03-07 13:57:26,493 Read config from in: /tmp/ecc_context_ecc_cfg_1_wk2hx8nu/post_ecc.ini 2026-03-07 13:57:27,825 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wk2hx8nu/solo_L1_stix-cal-energy_20230228_V03_ecc_in.fits 2026-03-07 14:06:29,090 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230228_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230228_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 14:06:35,260 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 14:06:35,267 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wk2hx8nu 2026-03-07 14:06:35,292 No soops found for time: 2023-02-28 17:49:55.124788 - 2023-02-28 20:13:55.140019 2026-03-07 14:06:35,384 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/28/CAL/solo_CAL_stix-cal-energy_20230228T174955-20230228T201355_V02.fits 2026-03-07 14:06:35,813 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mbzhr10b 2026-03-07 14:06:35,814 Read config from in: /tmp/ecc_context_ecc_cfg_1_mbzhr10b/post_ecc.ini 2026-03-07 14:06:37,072 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mbzhr10b/solo_L1_stix-cal-energy_20230209_V03_ecc_in.fits 2026-03-07 14:15:26,335 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 14:15:32,497 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 14:15:32,505 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mbzhr10b 2026-03-07 14:15:32,533 No soops found for time: 2023-02-09 00:03:49.127182 - 2023-02-09 02:27:53.142245 2026-03-07 14:15:32,629 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/09/CAL/solo_CAL_stix-cal-energy_20230209T000349-20230209T022753_V02.fits 2026-03-07 14:15:33,061 Error processing file /data/stix/out/fits_v1.2.0/L1/2023/02/02/CAL/solo_L1_stix-cal-energy_20230202_V03.fits Traceback (most recent call last): File "/home/stixcore/STIXCore/stixcore/processing/L1toL2.py", line 104, in process_type for l2 in tmp.from_level1( ^^^^^^^^^^^^^^^^ File "/home/stixcore/STIXCore/stixcore/products/CAL/energy.py", line 118, in from_level1 raise ValueError( ValueError: ELUT change within energy calibration data time range: elut_table_20221220.csv to elut_table_20221214.csv 2026-03-07 14:15:33,067 ELUT change within energy calibration data time range: elut_table_20221220.csv to elut_table_20221214.csv 2026-03-07 14:15:33,202 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cqr4rwtm 2026-03-07 14:15:33,203 Read config from in: /tmp/ecc_context_ecc_cfg_1_cqr4rwtm/post_ecc.ini 2026-03-07 14:15:34,503 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cqr4rwtm/solo_L1_stix-cal-energy_20230213_V03_ecc_in.fits 2026-03-07 14:24:26,000 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230213_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230213_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 14:24:33,949 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 14:24:33,957 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cqr4rwtm 2026-03-07 14:24:33,987 No soops found for time: 2023-02-13 04:43:42.761814 - 2023-02-13 07:07:42.776930 2026-03-07 14:24:34,088 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/13/CAL/solo_CAL_stix-cal-energy_20230213T044342-20230213T070742_V02.fits 2026-03-07 14:24:34,247 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t4xyav36 2026-03-07 14:24:34,248 Read config from in: /tmp/ecc_context_ecc_cfg_1_t4xyav36/post_ecc.ini 2026-03-07 14:24:35,536 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t4xyav36/solo_L1_stix-cal-energy_20230215_V03_ecc_in.fits 2026-03-07 14:33:23,925 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230215_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230215_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 14:33:30,020 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 14:33:30,027 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t4xyav36 2026-03-07 14:33:30,051 No soops found for time: 2023-02-15 04:43:55.064160 - 2023-02-15 07:07:55.079276 2026-03-07 14:33:30,145 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/15/CAL/solo_CAL_stix-cal-energy_20230215T044355-20230215T070755_V02.fits 2026-03-07 14:33:30,304 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2c8h9b70 2026-03-07 14:33:30,304 Read config from in: /tmp/ecc_context_ecc_cfg_1_2c8h9b70/post_ecc.ini 2026-03-07 14:33:31,548 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2c8h9b70/solo_L1_stix-cal-energy_20230204_V03_ecc_in.fits 2026-03-07 14:42:16,406 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230204_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230204_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 14:42:23,260 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 14:42:23,268 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2c8h9b70 2026-03-07 14:42:23,296 No soops found for time: 2023-02-04 03:33:25.396299 - 2023-02-04 05:57:25.411355 2026-03-07 14:42:23,399 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/02/04/CAL/solo_CAL_stix-cal-energy_20230204T033325-20230204T055725_V02.fits 2026-03-07 14:42:23,574 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gn8oqqwy 2026-03-07 14:42:23,574 Read config from in: /tmp/ecc_context_ecc_cfg_1_gn8oqqwy/post_ecc.ini 2026-03-07 14:42:24,847 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gn8oqqwy/solo_L1_stix-cal-energy_20230430_V03_ecc_in.fits 2026-03-07 14:51:24,970 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230430_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230430_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230430_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230430_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 14:51:31,189 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 14:51:31,196 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gn8oqqwy 2026-03-07 14:51:31,222 No soops found for time: 2023-04-30 12:22:48.487708 - 2023-04-30 13:32:31.495142 2026-03-07 14:51:31,320 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/30/CAL/solo_CAL_stix-cal-energy_20230430T122248-20230430T133231_V02.fits 2026-03-07 14:51:31,752 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yg37fi9i 2026-03-07 14:51:31,753 Read config from in: /tmp/ecc_context_ecc_cfg_1_yg37fi9i/post_ecc.ini 2026-03-07 14:51:32,996 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yg37fi9i/solo_L1_stix-cal-energy_20230410_V03_ecc_in.fits 2026-03-07 15:01:42,952 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230410_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230410_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230410_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230410_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 15:01:49,160 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-07 15:01:49,167 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yg37fi9i 2026-03-07 15:01:49,192 No soops found for time: 2023-04-10 11:27:48.385864 - 2023-04-10 13:51:48.401560 2026-03-07 15:01:49,293 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/10/CAL/solo_CAL_stix-cal-energy_20230410T112748-20230410T135148_V02.fits 2026-03-07 15:01:49,452 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r317cc1e 2026-03-07 15:01:49,453 Read config from in: /tmp/ecc_context_ecc_cfg_1_r317cc1e/post_ecc.ini 2026-03-07 15:01:50,706 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r317cc1e/solo_L1_stix-cal-energy_20230401_V03_ecc_in.fits 2026-03-07 15:10:42,511 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230401_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230401_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230401_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230401_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 15:10:49,079 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 15:10:49,085 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r317cc1e 2026-03-07 15:10:49,111 Soop found: SOOP 2026-03-07 15:10:49,208 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/01/CAL/solo_CAL_stix-cal-energy_20230401T162853-20230401T185252_V02.fits 2026-03-07 15:10:49,366 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1dbj_58j 2026-03-07 15:10:49,367 Read config from in: /tmp/ecc_context_ecc_cfg_1_1dbj_58j/post_ecc.ini 2026-03-07 15:10:52,077 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1dbj_58j/solo_L1_stix-cal-energy_20230424_V03_ecc_in.fits 2026-03-07 15:19:49,228 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230424_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230424_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230424_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230424_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 15:19:55,301 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 15:19:55,308 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1dbj_58j 2026-03-07 15:19:55,332 Soop found: SOOP 2026-03-07 15:19:55,430 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/24/CAL/solo_CAL_stix-cal-energy_20230424T122211-20230424T144611_V02.fits 2026-03-07 15:19:55,585 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h89_iw9r 2026-03-07 15:19:55,586 Read config from in: /tmp/ecc_context_ecc_cfg_1_h89_iw9r/post_ecc.ini 2026-03-07 15:19:56,816 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h89_iw9r/solo_L1_stix-cal-energy_20230408_V03_ecc_in.fits 2026-03-07 15:30:07,512 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230408_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230408_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230408_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230408_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 15:30:13,827 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-07 15:30:13,838 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h89_iw9r 2026-03-07 15:30:13,863 Soop found: SOOP 2026-03-07 15:30:13,964 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/08/CAL/solo_CAL_stix-cal-energy_20230408T094609-20230408T121009_V02.fits 2026-03-07 15:30:14,140 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g2mzrcum 2026-03-07 15:30:14,140 Read config from in: /tmp/ecc_context_ecc_cfg_1_g2mzrcum/post_ecc.ini 2026-03-07 15:30:15,380 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g2mzrcum/solo_L1_stix-cal-energy_20230405_V03_ecc_in.fits 2026-03-07 15:39:43,594 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230405_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230405_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230405_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230405_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 15:39:49,771 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 15:39:49,778 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g2mzrcum 2026-03-07 15:39:49,802 Soop found: SOOP 2026-03-07 15:39:49,896 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/05/CAL/solo_CAL_stix-cal-energy_20230405T093933-20230405T120333_V02.fits 2026-03-07 15:39:50,055 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j31ypnfv 2026-03-07 15:39:50,056 Read config from in: /tmp/ecc_context_ecc_cfg_1_j31ypnfv/post_ecc.ini 2026-03-07 15:39:51,288 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j31ypnfv/solo_L1_stix-cal-energy_20230414_V03_ecc_in.fits 2026-03-07 15:49:59,547 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230414_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230414_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230414_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230414_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 15:50:07,239 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 15:50:07,245 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j31ypnfv 2026-03-07 15:50:07,269 Soop found: SOOP 2026-03-07 15:50:07,365 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/14/CAL/solo_CAL_stix-cal-energy_20230414T113237-20230414T135637_V02.fits 2026-03-07 15:50:07,524 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__ec6l464 2026-03-07 15:50:07,524 Read config from in: /tmp/ecc_context_ecc_cfg_1__ec6l464/post_ecc.ini 2026-03-07 15:50:08,765 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__ec6l464/solo_L1_stix-cal-energy_20230407_V03_ecc_in.fits 2026-03-07 16:00:08,751 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230407_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230407_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230407_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230407_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 16:00:14,947 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 16:00:14,953 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__ec6l464 2026-03-07 16:00:14,978 Soop found: SOOP 2026-03-07 16:00:15,079 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/07/CAL/solo_CAL_stix-cal-energy_20230407T093945-20230407T120354_V02.fits 2026-03-07 16:00:15,237 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mgm7q706 2026-03-07 16:00:15,238 Read config from in: /tmp/ecc_context_ecc_cfg_1_mgm7q706/post_ecc.ini 2026-03-07 16:00:16,494 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mgm7q706/solo_L1_stix-cal-energy_20230420_V03_ecc_in.fits 2026-03-07 16:09:08,876 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230420_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230420_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230420_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230420_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 16:09:17,063 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 16:09:17,072 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mgm7q706 2026-03-07 16:09:17,107 Soop found: SOOP 2026-03-07 16:09:17,214 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/20/CAL/solo_CAL_stix-cal-energy_20230420T122147-20230420T144546_V02.fits 2026-03-07 16:09:17,383 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u_r68_pz 2026-03-07 16:09:17,383 Read config from in: /tmp/ecc_context_ecc_cfg_1_u_r68_pz/post_ecc.ini 2026-03-07 16:09:18,646 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u_r68_pz/solo_L1_stix-cal-energy_20230406_V03_ecc_in.fits 2026-03-07 16:19:30,129 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230406_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230406_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 16:19:36,523 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-07 16:19:36,530 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u_r68_pz 2026-03-07 16:19:36,554 No soops found for time: 2023-04-06 09:39:39.746246 - 2023-04-06 12:03:39.761941 2026-03-07 16:19:36,649 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/06/CAL/solo_CAL_stix-cal-energy_20230406T093939-20230406T120339_V02.fits 2026-03-07 16:19:36,822 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dbdqsgum 2026-03-07 16:19:36,822 Read config from in: /tmp/ecc_context_ecc_cfg_1_dbdqsgum/post_ecc.ini 2026-03-07 16:19:38,057 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dbdqsgum/solo_L1_stix-cal-energy_20230403_V03_ecc_in.fits 2026-03-07 16:28:43,323 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230403_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230403_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230403_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230403_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 16:28:49,474 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 16:28:49,480 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dbdqsgum 2026-03-07 16:28:49,505 Soop found: SOOP 2026-03-07 16:28:49,600 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/03/CAL/solo_CAL_stix-cal-energy_20230403T082301-20230403T104828_V02.fits 2026-03-07 16:28:50,033 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_76x79999 2026-03-07 16:28:50,034 Read config from in: /tmp/ecc_context_ecc_cfg_1_76x79999/post_ecc.ini 2026-03-07 16:28:51,279 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_76x79999/solo_L1_stix-cal-energy_20230417_V03_ecc_in.fits 2026-03-07 16:37:48,945 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230417_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230417_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230417_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230417_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 16:37:55,116 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 16:37:55,122 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_76x79999 2026-03-07 16:37:55,147 Soop found: SOOP 2026-03-07 16:37:55,245 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/17/CAL/solo_CAL_stix-cal-energy_20230417T122129-20230417T144528_V02.fits 2026-03-07 16:37:55,397 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h63rj3x8 2026-03-07 16:37:55,398 Read config from in: /tmp/ecc_context_ecc_cfg_1_h63rj3x8/post_ecc.ini 2026-03-07 16:37:56,640 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h63rj3x8/solo_L1_stix-cal-energy_20230418_V03_ecc_in.fits 2026-03-07 16:47:10,942 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230418_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230418_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230418_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230418_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 16:47:17,150 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 16:47:17,157 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h63rj3x8 2026-03-07 16:47:17,183 Soop found: SOOP 2026-03-07 16:47:17,278 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/18/CAL/solo_CAL_stix-cal-energy_20230418T122135-20230418T144534_V02.fits 2026-03-07 16:47:17,435 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xmup6js9 2026-03-07 16:47:17,436 Read config from in: /tmp/ecc_context_ecc_cfg_1_xmup6js9/post_ecc.ini 2026-03-07 16:47:18,696 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xmup6js9/solo_L1_stix-cal-energy_20230423_V03_ecc_in.fits 2026-03-07 16:56:04,122 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230423_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230423_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230423_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230423_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 16:56:11,740 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 16:56:11,747 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xmup6js9 2026-03-07 16:56:11,771 Soop found: SOOP 2026-03-07 16:56:11,866 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/23/CAL/solo_CAL_stix-cal-energy_20230423T122206-20230423T144605_V02.fits 2026-03-07 16:56:12,027 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e8ryfxsx 2026-03-07 16:56:12,027 Read config from in: /tmp/ecc_context_ecc_cfg_1_e8ryfxsx/post_ecc.ini 2026-03-07 16:56:13,258 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e8ryfxsx/solo_L1_stix-cal-energy_20230416_V03_ecc_in.fits 2026-03-07 17:05:24,646 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230416_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230416_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230416_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230416_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 17:05:31,404 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 17:05:31,411 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e8ryfxsx 2026-03-07 17:05:31,435 Soop found: SOOP 2026-03-07 17:05:31,531 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/16/CAL/solo_CAL_stix-cal-energy_20230416T113249-20230416T135714_V02.fits 2026-03-07 17:05:31,685 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kgah9l1l 2026-03-07 17:05:31,686 Read config from in: /tmp/ecc_context_ecc_cfg_1_kgah9l1l/post_ecc.ini 2026-03-07 17:05:32,921 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kgah9l1l/solo_L1_stix-cal-energy_20230421_V03_ecc_in.fits 2026-03-07 17:14:32,170 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230421_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230421_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230421_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230421_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 17:14:38,477 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 17:14:38,484 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kgah9l1l 2026-03-07 17:14:38,508 Soop found: SOOP 2026-03-07 17:14:38,601 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/21/CAL/solo_CAL_stix-cal-energy_20230421T122154-20230421T144554_V02.fits 2026-03-07 17:14:38,761 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_orzc05xk 2026-03-07 17:14:38,762 Read config from in: /tmp/ecc_context_ecc_cfg_1_orzc05xk/post_ecc.ini 2026-03-07 17:14:40,000 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_orzc05xk/solo_L1_stix-cal-energy_20230412_V03_ecc_in.fits 2026-03-07 17:24:49,655 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230412_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230412_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230412_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230412_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 17:24:55,798 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 17:24:55,805 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_orzc05xk 2026-03-07 17:24:55,833 Soop found: SOOP 2026-03-07 17:24:55,932 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/12/CAL/solo_CAL_stix-cal-energy_20230412T113224-20230412T135624_V02.fits 2026-03-07 17:24:56,093 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4o74w07r 2026-03-07 17:24:56,094 Read config from in: /tmp/ecc_context_ecc_cfg_1_4o74w07r/post_ecc.ini 2026-03-07 17:24:57,333 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4o74w07r/solo_L1_stix-cal-energy_20230427_V03_ecc_in.fits 2026-03-07 17:34:08,462 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230427_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230427_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230427_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230427_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 17:34:14,619 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 17:34:14,625 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4o74w07r 2026-03-07 17:34:14,650 No soops found for time: 2023-04-27 12:22:30.026123 - 2023-04-27 14:46:30.041425 2026-03-07 17:34:14,745 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/27/CAL/solo_CAL_stix-cal-energy_20230427T122230-20230427T144630_V02.fits 2026-03-07 17:34:15,174 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__8sml4xw 2026-03-07 17:34:15,174 Read config from in: /tmp/ecc_context_ecc_cfg_1__8sml4xw/post_ecc.ini 2026-03-07 17:34:16,414 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__8sml4xw/solo_L1_stix-cal-energy_20230411_V03_ecc_in.fits 2026-03-07 17:44:06,781 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230411_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230411_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230411_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230411_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 17:44:13,014 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-07 17:44:13,020 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__8sml4xw 2026-03-07 17:44:13,046 No soops found for time: 2023-04-11 11:27:54.542833 - 2023-04-11 13:52:18.558572 2026-03-07 17:44:13,145 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/11/CAL/solo_CAL_stix-cal-energy_20230411T112754-20230411T135218_V02.fits 2026-03-07 17:44:13,298 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zbbpl9dl 2026-03-07 17:44:13,299 Read config from in: /tmp/ecc_context_ecc_cfg_1_zbbpl9dl/post_ecc.ini 2026-03-07 17:44:14,566 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zbbpl9dl/solo_L1_stix-cal-energy_20230426_V03_ecc_in.fits 2026-03-07 17:53:41,276 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230426_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230426_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230426_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230426_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 17:53:48,810 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 17:53:48,817 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zbbpl9dl 2026-03-07 17:53:48,841 No soops found for time: 2023-04-26 12:22:23.873086 - 2023-04-26 14:46:23.888389 2026-03-07 17:53:48,938 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/26/CAL/solo_CAL_stix-cal-energy_20230426T122223-20230426T144623_V02.fits 2026-03-07 17:53:49,096 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yqyviwqw 2026-03-07 17:53:49,096 Read config from in: /tmp/ecc_context_ecc_cfg_1_yqyviwqw/post_ecc.ini 2026-03-07 17:53:50,334 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yqyviwqw/solo_L1_stix-cal-energy_20230419_V03_ecc_in.fits 2026-03-07 18:02:53,895 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230419_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230419_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230419_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230419_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 18:03:00,019 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 18:03:00,026 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yqyviwqw 2026-03-07 18:03:00,049 Soop found: SOOP 2026-03-07 18:03:00,142 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/19/CAL/solo_CAL_stix-cal-energy_20230419T122141-20230419T144541_V02.fits 2026-03-07 18:03:00,300 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2cfq87nt 2026-03-07 18:03:00,300 Read config from in: /tmp/ecc_context_ecc_cfg_1_2cfq87nt/post_ecc.ini 2026-03-07 18:03:01,539 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2cfq87nt/solo_L1_stix-cal-energy_20230422_V03_ecc_in.fits 2026-03-07 18:11:54,240 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230422_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230422_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230422_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230422_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 18:12:00,498 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 18:12:00,505 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2cfq87nt 2026-03-07 18:12:00,530 Soop found: SOOP 2026-03-07 18:12:00,628 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/22/CAL/solo_CAL_stix-cal-energy_20230422T122200-20230422T144559_V02.fits 2026-03-07 18:12:00,785 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eq_4eqlz 2026-03-07 18:12:00,785 Read config from in: /tmp/ecc_context_ecc_cfg_1_eq_4eqlz/post_ecc.ini 2026-03-07 18:12:02,021 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eq_4eqlz/solo_L1_stix-cal-energy_20230425_V03_ecc_in.fits 2026-03-07 18:20:54,836 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230425_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230425_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230425_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230425_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 18:21:01,391 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 18:21:01,406 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eq_4eqlz 2026-03-07 18:21:01,436 Soop found: SOOP 2026-03-07 18:21:01,537 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/25/CAL/solo_CAL_stix-cal-energy_20230425T122217-20230425T144617_V02.fits 2026-03-07 18:21:01,710 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_72t54dev 2026-03-07 18:21:01,711 Read config from in: /tmp/ecc_context_ecc_cfg_1_72t54dev/post_ecc.ini 2026-03-07 18:21:02,979 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_72t54dev/solo_L1_stix-cal-energy_20230428_V03_ecc_in.fits 2026-03-07 18:30:23,150 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230428_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230428_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230428_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230428_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 18:30:30,074 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 18:30:30,084 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_72t54dev 2026-03-07 18:30:30,117 No soops found for time: 2023-04-28 12:22:36.179159 - 2023-04-28 14:46:36.194462 2026-03-07 18:30:30,220 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/28/CAL/solo_CAL_stix-cal-energy_20230428T122236-20230428T144636_V02.fits 2026-03-07 18:30:30,393 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eyzzgaye 2026-03-07 18:30:30,393 Read config from in: /tmp/ecc_context_ecc_cfg_1_eyzzgaye/post_ecc.ini 2026-03-07 18:30:31,679 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eyzzgaye/solo_L1_stix-cal-energy_20230409_V03_ecc_in.fits 2026-03-07 18:40:44,468 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230409_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230409_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230409_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230409_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 18:40:52,065 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 18:40:52,079 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eyzzgaye 2026-03-07 18:40:52,105 Soop found: SOOP 2026-03-07 18:40:52,202 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/09/CAL/solo_CAL_stix-cal-energy_20230409T094615-20230409T121028_V02.fits 2026-03-07 18:40:52,368 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nbkhzvu9 2026-03-07 18:40:52,369 Read config from in: /tmp/ecc_context_ecc_cfg_1_nbkhzvu9/post_ecc.ini 2026-03-07 18:40:53,601 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nbkhzvu9/solo_L1_stix-cal-energy_20230429_V03_ecc_in.fits 2026-03-07 18:50:22,613 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230429_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230429_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230429_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230429_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 18:50:29,997 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 18:50:30,004 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nbkhzvu9 2026-03-07 18:50:30,029 No soops found for time: 2023-04-29 12:22:42.334165 - 2023-04-29 14:46:42.349518 2026-03-07 18:50:30,125 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/29/CAL/solo_CAL_stix-cal-energy_20230429T122242-20230429T144642_V02.fits 2026-03-07 18:50:30,515 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ogt8i0t8 2026-03-07 18:50:30,515 Read config from in: /tmp/ecc_context_ecc_cfg_1_ogt8i0t8/post_ecc.ini 2026-03-07 18:50:31,753 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ogt8i0t8/solo_L1_stix-cal-energy_20230402_V03_ecc_in.fits 2026-03-07 18:59:41,421 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230402_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230402_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230402_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230402_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 18:59:47,597 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 18:59:47,604 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ogt8i0t8 2026-03-07 18:59:47,629 Soop found: SOOP 2026-03-07 18:59:47,728 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/02/CAL/solo_CAL_stix-cal-energy_20230402T162859-20230402T180205_V02.fits 2026-03-07 18:59:48,156 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5ygnhjnd 2026-03-07 18:59:48,156 Read config from in: /tmp/ecc_context_ecc_cfg_1_5ygnhjnd/post_ecc.ini 2026-03-07 18:59:49,399 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5ygnhjnd/solo_L1_stix-cal-energy_20230413_V03_ecc_in.fits 2026-03-07 19:09:29,714 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230413_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230413_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230413_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230413_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 19:09:35,817 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 19:09:35,824 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5ygnhjnd 2026-03-07 19:09:35,848 Soop found: SOOP 2026-03-07 19:09:35,945 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/13/CAL/solo_CAL_stix-cal-energy_20230413T113229-20230413T135629_V02.fits 2026-03-07 19:09:36,098 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_li0jrsek 2026-03-07 19:09:36,098 Read config from in: /tmp/ecc_context_ecc_cfg_1_li0jrsek/post_ecc.ini 2026-03-07 19:09:37,338 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_li0jrsek/solo_L1_stix-cal-energy_20230415_V03_ecc_in.fits 2026-03-07 19:19:27,353 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230415_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230415_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230415_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230415_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 19:19:33,590 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-07 19:19:33,596 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_li0jrsek 2026-03-07 19:19:33,621 Soop found: SOOP 2026-03-07 19:19:33,720 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/15/CAL/solo_CAL_stix-cal-energy_20230415T113243-20230415T135643_V02.fits 2026-03-07 19:19:34,184 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qzqz_bk2 2026-03-07 19:19:34,185 Read config from in: /tmp/ecc_context_ecc_cfg_1_qzqz_bk2/post_ecc.ini 2026-03-07 19:19:35,433 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qzqz_bk2/solo_L1_stix-cal-energy_20230404_V03_ecc_in.fits 2026-03-07 19:29:03,573 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230404_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230404_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230404_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230404_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-07 19:29:10,787 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-07 19:29:10,794 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qzqz_bk2 2026-03-07 19:29:10,821 No soops found for time: 2023-04-04 09:33:30.431040 - 2023-04-04 11:57:44.446662 2026-03-07 19:29:10,921 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2023/04/04/CAL/solo_CAL_stix-cal-energy_20230404T093330-20230404T115744_V02.fits