2026-03-10 11:17:35,492 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-03-10 11:17:36,364 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260309_002.tm 2026-03-10 11:17:36,621 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260309_002.tm 2026-03-10 11:17:36,622 Create SOCManager @ /data/stix/SOLSOC/from_edds/tm/processing 2026-03-10 11:17:36,628 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-03-10 11:17:36,655 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-10 11:17:36,656 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-03-10 11:17:36,657 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-10 11:17:36,657 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M23_V01.json 2026-03-10 11:17:36,658 newer version (257) found for LTP23_Apr2026-Jun2026: replacing 2026-03-10 11:17:36,658 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-03-10 11:17:36,659 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-03-10 11:17:36,659 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-03-10 11:17:36,660 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-03-10 11:17:36,661 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-03-10 11:17:36,662 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-03-10 11:17:36,662 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-03-10 11:17:36,663 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-03-10 11:17:36,663 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-03-10 11:17:36,664 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-03-10 11:17:36,665 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-03-10 11:17:36,666 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-03-10 11:17:36,666 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-03-10 11:17:36,667 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-03-10 11:17:36,667 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-03-10 11:17:36,669 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-03-10 11:17:36,669 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-03-10 11:17:36,669 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-03-10 11:17:36,670 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-03-10 11:17:36,671 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-03-10 11:17:36,671 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-03-10 11:17:36,672 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-03-10 11:17:36,672 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-03-10 11:17:36,673 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-03-10 11:17:36,673 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-03-10 11:17:36,674 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-03-10 11:17:36,674 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-03-10 11:17:36,675 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-03-10 11:17:36,675 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-03-10 11:17:36,676 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-03-10 11:17:36,676 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-03-10 11:17:36,677 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-03-10 11:17:36,677 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-03-10 11:17:36,678 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-03-10 11:17:36,678 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-03-10 11:17:36,679 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-03-10 11:17:36,679 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-03-10 11:17:36,681 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-03-10 11:17:36,681 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-03-10 11:17:36,682 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-03-10 11:17:36,682 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-03-10 11:17:36,683 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-03-10 11:17:36,683 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-03-10 11:17:36,683 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-03-10 11:17:36,683 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-03-10 11:17:36,684 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-03-10 11:17:36,684 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-03-10 11:17:36,685 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-03-10 11:17:36,685 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-03-10 11:17:36,686 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-03-10 11:17:36,686 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-03-10 11:17:36,686 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-03-10 11:17:36,686 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-03-10 11:17:36,687 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-03-10 11:17:36,687 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-03-10 11:17:36,688 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-03-10 11:17:36,688 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-03-10 11:17:36,689 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-03-10 11:17:36,689 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-03-10 11:17:36,690 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-03-10 11:17:36,690 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-03-10 11:17:36,691 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-03-10 11:17:36,691 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-03-10 11:17:36,692 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-03-10 11:17:36,692 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-03-10 11:17:36,693 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-03-10 11:17:36,694 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-03-10 11:17:36,695 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-03-10 11:17:36,695 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-03-10 11:17:36,695 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-03-10 11:17:36,696 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-03-10 11:17:36,696 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-03-10 11:17:36,696 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-03-10 11:17:36,696 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-03-10 11:17:36,696 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-03-10 11:17:36,697 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-03-10 11:17:36,697 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-03-10 11:17:36,697 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-10 11:17:36,697 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-03-10 11:17:36,697 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-03-10 11:17:36,698 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-03-10 11:17:36,698 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-10 11:17:36,698 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-03-10 11:17:36,698 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-03-10 11:17:36,698 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-03-10 11:17:36,698 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-03-10 11:17:36,987 SOOP Rebuild Index: soops: 562observations 1247 2026-03-10 11:17:52,396 PIPELINE VERSION Version: 1.7.3 Common instrument config version: v0.1.10 PROCESSING VERSIONS Prod: Ephemeris File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/ANC/aspect.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/CAL/energy.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-03-10 11:17:52,397 CONFIG [Paths] tm_archive = /data/stix/SOLSOC/from_edds/tm/processing fits_archive = /data/stix/out/fits_v1.2.0 spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12388 parallel_batchsize_l0 = 100 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = INFO log_dir = /data/stix/out/fits_v1.2.0/logging error_mail_send = True error_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch sync_tm_at_start = True stop_after_unprocessed = True start_with_unprocessed = True last_processed = TM_LTP21_BatchRequest.PktTmRaw.SOL.0.2025.237.08.00.24.563.NHzM@2025.365.16.00.00.336.1.xml.out history_db_file = /home/stixcore/soar_pub/processing_history.sqlite [Publish] db_file = /home/stixcore/soar_pub/published.sqlite include_levels = L0, L1, ANC, LL03 waiting_period = 42d target_dir = /home/stixcore/from_pub099 report_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie report_mail_send = True same_esa_name_dir = /data/stix/out/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/fits_v1.2.0 ll_waiting_period = 0d target_host = pub026.cs.technik.fhnw.ch supplement_report = /home/stixcore/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal,asp log_dir = /data/stix/out/fits_v1.2.0/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-03-10 11:17:52,397 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 36327 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260309_002.tm'), 'pred', datetime.datetime(2026, 3, 9, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260309_002.tm'), 'flown', datetime.datetime(2026, 3, 9, 0, 0))] IDBManager: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb Versions: [{'label': '2.26.36', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-03-10 11:17:53,518 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260309_002.tm 2026-03-10 11:17:53,772 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260309_002.tm 2026-03-10 11:17:53,773 Loaded 1 ECC configurations from index 2026-03-10 11:17:53,941 Successfully read ELUT file: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/config/data/common/elut/elut_table_20250523.csv 2026-03-10 11:17:53,976 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_juann1j0 2026-03-10 11:17:53,977 Read config from in: /tmp/ecc_context_ecc_cfg_1_juann1j0/post_ecc.ini 2026-03-10 11:17:55,247 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_juann1j0/solo_L1_stix-cal-energy_20251030_V03_ecc_in.fits 2026-03-10 11:27:46,390 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251030_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251030_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251030_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 11:27:52,641 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 11:27:52,651 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_juann1j0 2026-03-10 11:27:52,693 Soop found: SOOP 2026-03-10 11:27:52,817 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/30/CAL/solo_CAL_stix-cal-energy_20251030T002300-20251030T024700_V02.fits 2026-03-10 11:27:52,984 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ygfa5c_5 2026-03-10 11:27:52,984 Read config from in: /tmp/ecc_context_ecc_cfg_1_ygfa5c_5/post_ecc.ini 2026-03-10 11:27:54,230 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ygfa5c_5/solo_L1_stix-cal-energy_20251010_V03_ecc_in.fits 2026-03-10 11:37:52,933 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251010_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251010_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251010_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 11:38:00,786 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-10 11:38:00,793 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ygfa5c_5 2026-03-10 11:38:00,818 Soop found: SOOP 2026-03-10 11:38:00,818 Soop found: SOOP 2026-03-10 11:38:00,918 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/10/CAL/solo_CAL_stix-cal-energy_20251010T040732-20251010T060647_V02.fits 2026-03-10 11:38:01,075 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fzdz45__ 2026-03-10 11:38:01,076 Read config from in: /tmp/ecc_context_ecc_cfg_1_fzdz45__/post_ecc.ini 2026-03-10 11:38:02,315 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fzdz45__/solo_L1_stix-cal-energy_20251001_V03_ecc_in.fits 2026-03-10 11:48:06,117 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251001_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251001_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251001_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251001_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 11:48:12,423 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 11:48:12,430 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fzdz45__ 2026-03-10 11:48:12,456 Soop found: SOOP 2026-03-10 11:48:12,558 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/01/CAL/solo_CAL_stix-cal-energy_20251001T010738-20251001T033142_V02.fits 2026-03-10 11:48:12,716 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_78la1z70 2026-03-10 11:48:12,717 Read config from in: /tmp/ecc_context_ecc_cfg_1_78la1z70/post_ecc.ini 2026-03-10 11:48:13,959 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_78la1z70/solo_L1_stix-cal-energy_20251024_V03_ecc_in.fits 2026-03-10 11:57:30,359 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251024_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251024_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251024_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 11:57:36,857 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 11:57:36,864 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_78la1z70 2026-03-10 11:57:36,890 Soop found: SOOP 2026-03-10 11:57:36,890 Soop found: SOOP 2026-03-10 11:57:36,990 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/24/CAL/solo_CAL_stix-cal-energy_20251024T052754-20251024T075354_V02.fits 2026-03-10 11:57:37,155 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7f3tnz98 2026-03-10 11:57:37,156 Read config from in: /tmp/ecc_context_ecc_cfg_1_7f3tnz98/post_ecc.ini 2026-03-10 11:57:38,407 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7f3tnz98/solo_L1_stix-cal-energy_20251008_V03_ecc_in.fits 2026-03-10 12:07:24,245 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251008_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251008_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251008_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 12:07:30,672 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 12:07:30,679 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7f3tnz98 2026-03-10 12:07:30,707 Soop found: SOOP 2026-03-10 12:07:30,707 Soop found: SOOP 2026-03-10 12:07:30,808 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/08/CAL/solo_CAL_stix-cal-energy_20251008T040720-20251008T063120_V02.fits 2026-03-10 12:07:30,973 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x64xwqa4 2026-03-10 12:07:30,974 Read config from in: /tmp/ecc_context_ecc_cfg_1_x64xwqa4/post_ecc.ini 2026-03-10 12:07:32,222 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x64xwqa4/solo_L1_stix-cal-energy_20251005_V03_ecc_in.fits 2026-03-10 12:17:12,549 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251005_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251005_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251005_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 12:17:18,898 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 12:17:18,905 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x64xwqa4 2026-03-10 12:17:18,933 Soop found: SOOP 2026-03-10 12:17:19,029 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/05/CAL/solo_CAL_stix-cal-energy_20251005T012528-20251005T035128_V02.fits 2026-03-10 12:17:19,197 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ow20wq8z 2026-03-10 12:17:19,197 Read config from in: /tmp/ecc_context_ecc_cfg_1_ow20wq8z/post_ecc.ini 2026-03-10 12:17:20,454 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ow20wq8z/solo_L1_stix-cal-energy_20251014_V03_ecc_in.fits 2026-03-10 12:27:07,667 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251014_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251014_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251014_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 12:27:13,999 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 12:27:14,007 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ow20wq8z 2026-03-10 12:27:14,036 Soop found: SOOP 2026-03-10 12:27:14,036 Soop found: SOOP 2026-03-10 12:27:14,136 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/14/CAL/solo_CAL_stix-cal-energy_20251014T031721-20251014T054120_V02.fits 2026-03-10 12:27:14,292 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3y9rmakw 2026-03-10 12:27:14,293 Read config from in: /tmp/ecc_context_ecc_cfg_1_3y9rmakw/post_ecc.ini 2026-03-10 12:27:17,165 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3y9rmakw/solo_L1_stix-cal-energy_20251007_V03_ecc_in.fits 2026-03-10 12:37:01,542 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251007_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251007_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251007_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 12:37:07,832 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 12:37:07,842 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3y9rmakw 2026-03-10 12:37:07,876 Soop found: SOOP 2026-03-10 12:37:07,974 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/07/CAL/solo_CAL_stix-cal-energy_20251007T040714-20251007T063114_V02.fits 2026-03-10 12:37:08,145 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9pr6jiwu 2026-03-10 12:37:08,145 Read config from in: /tmp/ecc_context_ecc_cfg_1_9pr6jiwu/post_ecc.ini 2026-03-10 12:37:09,387 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9pr6jiwu/solo_L1_stix-cal-energy_20251020_V03_ecc_in.fits 2026-03-10 12:46:50,686 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251020_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251020_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251020_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 12:46:56,976 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 12:46:56,984 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9pr6jiwu 2026-03-10 12:46:57,010 Soop found: SOOP 2026-03-10 12:46:57,010 Soop found: SOOP 2026-03-10 12:46:57,106 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/20/CAL/solo_CAL_stix-cal-energy_20251020T052730-20251020T075130_V02.fits 2026-03-10 12:46:57,270 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mmh2nm1d 2026-03-10 12:46:57,270 Read config from in: /tmp/ecc_context_ecc_cfg_1_mmh2nm1d/post_ecc.ini 2026-03-10 12:46:58,512 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mmh2nm1d/solo_L1_stix-cal-energy_20251006_V03_ecc_in.fits 2026-03-10 12:57:06,279 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251006_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251006_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251006_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 12:57:12,623 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 12:57:12,630 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mmh2nm1d 2026-03-10 12:57:12,657 Soop found: SOOP 2026-03-10 12:57:12,658 Soop found: SOOP 2026-03-10 12:57:12,756 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/06/CAL/solo_CAL_stix-cal-energy_20251006T040707-20251006T063107_V02.fits 2026-03-10 12:57:12,914 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vsnz2r_w 2026-03-10 12:57:12,914 Read config from in: /tmp/ecc_context_ecc_cfg_1_vsnz2r_w/post_ecc.ini 2026-03-10 12:57:14,157 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vsnz2r_w/solo_L1_stix-cal-energy_20251003_V03_ecc_in.fits 2026-03-10 13:07:08,947 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251003_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251003_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251003_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 13:07:15,266 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 13:07:15,273 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vsnz2r_w 2026-03-10 13:07:15,300 Soop found: SOOP 2026-03-10 13:07:15,300 Soop found: SOOP 2026-03-10 13:07:15,398 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/03/CAL/solo_CAL_stix-cal-energy_20251003T011336-20251003T033807_V02.fits 2026-03-10 13:07:15,553 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yjjcb8vo 2026-03-10 13:07:15,554 Read config from in: /tmp/ecc_context_ecc_cfg_1_yjjcb8vo/post_ecc.ini 2026-03-10 13:07:16,803 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yjjcb8vo/solo_L1_stix-cal-energy_20251017_V03_ecc_in.fits 2026-03-10 13:17:07,213 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251017_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251017_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251017_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 13:17:13,566 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 13:17:13,573 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yjjcb8vo 2026-03-10 13:17:13,600 Soop found: SOOP 2026-03-10 13:17:13,600 Soop found: SOOP 2026-03-10 13:17:13,698 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/17/CAL/solo_CAL_stix-cal-energy_20251017T032240-20251017T054923_V02.fits 2026-03-10 13:17:13,852 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a5h1xoab 2026-03-10 13:17:13,853 Read config from in: /tmp/ecc_context_ecc_cfg_1_a5h1xoab/post_ecc.ini 2026-03-10 13:17:15,116 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a5h1xoab/solo_L1_stix-cal-energy_20251031_V03_ecc_in.fits 2026-03-10 13:26:43,457 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251031_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251031_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251031_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251031_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 13:26:50,643 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 13:26:50,650 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a5h1xoab 2026-03-10 13:26:50,691 Soop found: SOOP 2026-03-10 13:26:50,691 Soop found: SOOP 2026-03-10 13:26:52,274 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/31/CAL/solo_CAL_stix-cal-energy_20251031T002306-20251031T024713_V02.fits 2026-03-10 13:26:52,448 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__51f7pm8 2026-03-10 13:26:52,448 Read config from in: /tmp/ecc_context_ecc_cfg_1__51f7pm8/post_ecc.ini 2026-03-10 13:26:53,717 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__51f7pm8/solo_L1_stix-cal-energy_20251018_V03_ecc_in.fits 2026-03-10 13:36:20,230 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251018_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251018_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251018_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 13:36:26,472 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 13:36:26,479 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__51f7pm8 2026-03-10 13:36:26,506 Soop found: SOOP 2026-03-10 13:36:26,506 Soop found: SOOP 2026-03-10 13:36:26,604 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/18/CAL/solo_CAL_stix-cal-energy_20251018T035352-20251018T061752_V02.fits 2026-03-10 13:36:26,758 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x89wifh2 2026-03-10 13:36:26,758 Read config from in: /tmp/ecc_context_ecc_cfg_1_x89wifh2/post_ecc.ini 2026-03-10 13:36:27,985 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x89wifh2/solo_L1_stix-cal-energy_20251023_V03_ecc_in.fits 2026-03-10 13:45:51,759 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251023_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251023_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251023_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 13:45:58,021 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 13:45:58,028 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x89wifh2 2026-03-10 13:45:58,055 Soop found: SOOP 2026-03-10 13:45:58,055 Soop found: SOOP 2026-03-10 13:45:58,152 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/23/CAL/solo_CAL_stix-cal-energy_20251023T052748-20251023T075147_V02.fits 2026-03-10 13:45:58,315 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0fgv6jon 2026-03-10 13:45:58,315 Read config from in: /tmp/ecc_context_ecc_cfg_1_0fgv6jon/post_ecc.ini 2026-03-10 13:45:59,556 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0fgv6jon/solo_L1_stix-cal-energy_20251016_V03_ecc_in.fits 2026-03-10 13:55:30,204 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251016_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251016_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251016_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 13:55:36,570 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 13:55:36,578 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0fgv6jon 2026-03-10 13:55:36,609 Soop found: SOOP 2026-03-10 13:55:36,609 Soop found: SOOP 2026-03-10 13:55:36,710 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/16/CAL/solo_CAL_stix-cal-energy_20251016T032234-20251016T054634_V02.fits 2026-03-10 13:55:36,866 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kkqdnt5d 2026-03-10 13:55:36,867 Read config from in: /tmp/ecc_context_ecc_cfg_1_kkqdnt5d/post_ecc.ini 2026-03-10 13:55:38,109 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kkqdnt5d/solo_L1_stix-cal-energy_20251021_V03_ecc_in.fits 2026-03-10 14:05:09,374 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251021_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251021_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251021_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 14:05:15,677 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 14:05:15,685 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kkqdnt5d 2026-03-10 14:05:15,713 Soop found: SOOP 2026-03-10 14:05:15,713 Soop found: SOOP 2026-03-10 14:05:15,808 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/21/CAL/solo_CAL_stix-cal-energy_20251021T052736-20251021T075136_V02.fits 2026-03-10 14:05:15,966 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__z51bvan 2026-03-10 14:05:15,967 Read config from in: /tmp/ecc_context_ecc_cfg_1__z51bvan/post_ecc.ini 2026-03-10 14:05:17,218 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__z51bvan/solo_L1_stix-cal-energy_20251012_V03_ecc_in.fits 2026-03-10 14:15:06,015 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251012_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251012_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251012_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 14:15:12,336 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-10 14:15:12,343 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__z51bvan 2026-03-10 14:15:12,371 Soop found: SOOP 2026-03-10 14:15:12,372 Soop found: SOOP 2026-03-10 14:15:12,470 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/12/CAL/solo_CAL_stix-cal-energy_20251012T000507-20251012T024009_V02.fits 2026-03-10 14:15:12,634 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j_pz8oqb 2026-03-10 14:15:12,635 Read config from in: /tmp/ecc_context_ecc_cfg_1_j_pz8oqb/post_ecc.ini 2026-03-10 14:15:13,893 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j_pz8oqb/solo_L1_stix-cal-energy_20251027_V03_ecc_in.fits 2026-03-10 14:24:42,740 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251027_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251027_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251027_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 14:24:51,115 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 14:24:51,122 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j_pz8oqb 2026-03-10 14:24:51,149 Soop found: SOOP 2026-03-10 14:24:51,149 Soop found: SOOP 2026-03-10 14:24:51,248 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/27/CAL/solo_CAL_stix-cal-energy_20251027T073307-20251027T095706_V02.fits 2026-03-10 14:24:51,407 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zf9om9m_ 2026-03-10 14:24:51,408 Read config from in: /tmp/ecc_context_ecc_cfg_1_zf9om9m_/post_ecc.ini 2026-03-10 14:24:52,657 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zf9om9m_/solo_L1_stix-cal-energy_20251011_V03_ecc_in.fits 2026-03-10 14:34:52,169 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251011_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251011_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251011_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 14:34:58,427 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 14:34:58,434 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zf9om9m_ 2026-03-10 14:34:58,466 Soop found: SOOP 2026-03-10 14:34:58,466 Soop found: SOOP 2026-03-10 14:34:58,564 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/11/CAL/solo_CAL_stix-cal-energy_20251011T000501-20251011T022901_V02.fits 2026-03-10 14:34:58,719 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__7we36pd 2026-03-10 14:34:58,719 Read config from in: /tmp/ecc_context_ecc_cfg_1__7we36pd/post_ecc.ini 2026-03-10 14:34:59,961 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__7we36pd/solo_L1_stix-cal-energy_20251026_V03_ecc_in.fits 2026-03-10 14:44:31,422 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251026_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251026_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251026_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 14:44:37,903 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 14:44:37,911 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__7we36pd 2026-03-10 14:44:37,958 Soop found: SOOP 2026-03-10 14:44:37,959 Soop found: SOOP 2026-03-10 14:44:38,065 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/26/CAL/solo_CAL_stix-cal-energy_20251026T054810-20251026T081655_V02.fits 2026-03-10 14:44:38,227 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x0s9ajn3 2026-03-10 14:44:38,228 Read config from in: /tmp/ecc_context_ecc_cfg_1_x0s9ajn3/post_ecc.ini 2026-03-10 14:44:39,471 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x0s9ajn3/solo_L1_stix-cal-energy_20251019_V03_ecc_in.fits 2026-03-10 14:54:15,155 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251019_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251019_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251019_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 14:54:21,634 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 14:54:21,641 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x0s9ajn3 2026-03-10 14:54:21,673 Soop found: SOOP 2026-03-10 14:54:21,673 Soop found: SOOP 2026-03-10 14:54:21,770 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/19/CAL/solo_CAL_stix-cal-energy_20251019T035359-20251019T062516_V02.fits 2026-03-10 14:54:21,931 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tm4_okck 2026-03-10 14:54:21,931 Read config from in: /tmp/ecc_context_ecc_cfg_1_tm4_okck/post_ecc.ini 2026-03-10 14:54:23,198 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tm4_okck/solo_L1_stix-cal-energy_20251022_V03_ecc_in.fits 2026-03-10 15:03:54,970 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251022_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251022_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251022_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 15:04:01,225 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 15:04:01,232 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tm4_okck 2026-03-10 15:04:01,260 Soop found: SOOP 2026-03-10 15:04:01,260 Soop found: SOOP 2026-03-10 15:04:01,355 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/22/CAL/solo_CAL_stix-cal-energy_20251022T052742-20251022T075141_V02.fits 2026-03-10 15:04:01,513 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9v9vztkf 2026-03-10 15:04:01,514 Read config from in: /tmp/ecc_context_ecc_cfg_1_9v9vztkf/post_ecc.ini 2026-03-10 15:04:02,783 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9v9vztkf/solo_L1_stix-cal-energy_20251025_V03_ecc_in.fits 2026-03-10 15:13:22,318 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251025_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251025_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251025_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 15:13:28,576 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 15:13:28,583 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9v9vztkf 2026-03-10 15:13:28,610 Soop found: SOOP 2026-03-10 15:13:28,610 Soop found: SOOP 2026-03-10 15:13:28,705 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/25/CAL/solo_CAL_stix-cal-energy_20251025T054804-20251025T081203_V02.fits 2026-03-10 15:13:28,869 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wt5377gf 2026-03-10 15:13:28,870 Read config from in: /tmp/ecc_context_ecc_cfg_1_wt5377gf/post_ecc.ini 2026-03-10 15:13:31,576 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wt5377gf/solo_L1_stix-cal-energy_20251028_V03_ecc_in.fits 2026-03-10 15:23:04,243 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251028_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251028_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251028_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 15:23:11,247 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 15:23:11,255 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wt5377gf 2026-03-10 15:23:11,285 Soop found: SOOP 2026-03-10 15:23:11,285 Soop found: SOOP 2026-03-10 15:23:11,387 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/28/CAL/solo_CAL_stix-cal-energy_20251028T073313-20251028T095712_V02.fits 2026-03-10 15:23:11,563 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ficwm8ec 2026-03-10 15:23:11,563 Read config from in: /tmp/ecc_context_ecc_cfg_1_ficwm8ec/post_ecc.ini 2026-03-10 15:23:12,828 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ficwm8ec/solo_L1_stix-cal-energy_20251009_V03_ecc_in.fits 2026-03-10 15:33:07,402 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251009_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251009_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251009_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251009_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 15:33:13,798 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 15:33:13,806 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ficwm8ec 2026-03-10 15:33:13,835 Soop found: SOOP 2026-03-10 15:33:13,835 Soop found: SOOP 2026-03-10 15:33:13,935 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/09/CAL/solo_CAL_stix-cal-energy_20251009T040726-20251009T063126_V02.fits 2026-03-10 15:33:14,090 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b68yyoi_ 2026-03-10 15:33:14,091 Read config from in: /tmp/ecc_context_ecc_cfg_1_b68yyoi_/post_ecc.ini 2026-03-10 15:33:15,324 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b68yyoi_/solo_L1_stix-cal-energy_20251029_V03_ecc_in.fits 2026-03-10 15:42:43,839 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251029_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251029_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251029_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251029_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 15:42:50,140 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 15:42:50,147 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b68yyoi_ 2026-03-10 15:42:50,174 Soop found: SOOP 2026-03-10 15:42:50,174 Soop found: SOOP 2026-03-10 15:42:50,271 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/29/CAL/solo_CAL_stix-cal-energy_20251029T073319-20251029T091159_V02.fits 2026-03-10 15:42:50,430 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_63n7yll3 2026-03-10 15:42:50,431 Read config from in: /tmp/ecc_context_ecc_cfg_1_63n7yll3/post_ecc.ini 2026-03-10 15:42:51,681 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_63n7yll3/solo_L1_stix-cal-energy_20251002_V03_ecc_in.fits 2026-03-10 15:52:20,810 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251002_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251002_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251002_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251002_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 15:52:27,068 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 15:52:27,077 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_63n7yll3 2026-03-10 15:52:27,105 Soop found: SOOP 2026-03-10 15:52:27,205 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/02/CAL/solo_CAL_stix-cal-energy_20251002T011330-20251002T033730_V02.fits 2026-03-10 15:52:27,363 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sktz0d55 2026-03-10 15:52:27,364 Read config from in: /tmp/ecc_context_ecc_cfg_1_sktz0d55/post_ecc.ini 2026-03-10 15:52:28,603 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sktz0d55/solo_L1_stix-cal-energy_20251013_V03_ecc_in.fits 2026-03-10 16:02:07,117 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251013_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251013_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251013_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251013_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 16:02:13,441 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 16:02:13,448 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sktz0d55 2026-03-10 16:02:13,476 Soop found: SOOP 2026-03-10 16:02:13,476 Soop found: SOOP 2026-03-10 16:02:13,572 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/13/CAL/solo_CAL_stix-cal-energy_20251013T031715-20251013T054114_V02.fits 2026-03-10 16:02:13,729 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_koxmjc5r 2026-03-10 16:02:13,729 Read config from in: /tmp/ecc_context_ecc_cfg_1_koxmjc5r/post_ecc.ini 2026-03-10 16:02:14,979 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_koxmjc5r/solo_L1_stix-cal-energy_20251015_V03_ecc_in.fits 2026-03-10 16:11:47,248 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251015_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251015_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251015_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251015_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 16:11:55,269 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 16:11:55,277 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_koxmjc5r 2026-03-10 16:11:55,303 Soop found: SOOP 2026-03-10 16:11:55,303 Soop found: SOOP 2026-03-10 16:11:55,400 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/15/CAL/solo_CAL_stix-cal-energy_20251015T031726-20251015T054156_V02.fits 2026-03-10 16:11:55,561 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9rjyzgdz 2026-03-10 16:11:55,562 Read config from in: /tmp/ecc_context_ecc_cfg_1_9rjyzgdz/post_ecc.ini 2026-03-10 16:11:56,795 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9rjyzgdz/solo_L1_stix-cal-energy_20251004_V03_ecc_in.fits 2026-03-10 16:22:08,528 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251004_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251004_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251004_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251004_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 16:22:15,296 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 16:22:15,304 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9rjyzgdz 2026-03-10 16:22:15,336 Soop found: SOOP 2026-03-10 16:22:15,336 Soop found: SOOP 2026-03-10 16:22:15,435 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/04/CAL/solo_CAL_stix-cal-energy_20251004T012522-20251004T034922_V02.fits 2026-03-10 16:22:15,571 Successfully read ELUT file: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/config/data/common/elut/elut_table_20241114.csv 2026-03-10 16:22:15,604 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xqtgtt49 2026-03-10 16:22:15,605 Read config from in: /tmp/ecc_context_ecc_cfg_1_xqtgtt49/post_ecc.ini 2026-03-10 16:22:16,838 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xqtgtt49/solo_L1_stix-cal-energy_20250130_V03_ecc_in.fits 2026-03-10 16:31:56,610 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250130_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250130_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 16:32:03,031 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 16:32:03,038 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xqtgtt49 2026-03-10 16:32:03,068 Soop found: SOOP 2026-03-10 16:32:03,182 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/30/CAL/solo_CAL_stix-cal-energy_20250130T055857-20250130T082257_V02.fits 2026-03-10 16:32:03,342 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ungvr13g 2026-03-10 16:32:03,343 Read config from in: /tmp/ecc_context_ecc_cfg_1_ungvr13g/post_ecc.ini 2026-03-10 16:32:04,581 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ungvr13g/solo_L1_stix-cal-energy_20250110_V03_ecc_in.fits 2026-03-10 16:41:17,420 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250110_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250110_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 16:41:23,788 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 16:41:23,796 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ungvr13g 2026-03-10 16:41:23,827 Soop found: SOOP 2026-03-10 16:41:23,928 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/10/CAL/solo_CAL_stix-cal-energy_20250110T032537-20250110T054937_V02.fits 2026-03-10 16:41:24,085 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4pf10d6z 2026-03-10 16:41:24,086 Read config from in: /tmp/ecc_context_ecc_cfg_1_4pf10d6z/post_ecc.ini 2026-03-10 16:41:25,329 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4pf10d6z/solo_L1_stix-cal-energy_20250101_V03_ecc_in.fits 2026-03-10 16:50:53,033 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 16:50:59,309 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 16:50:59,318 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4pf10d6z 2026-03-10 16:50:59,350 Soop found: SOOP 2026-03-10 16:50:59,448 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/01/CAL/solo_CAL_stix-cal-energy_20250101T030907-20250101T053346_V02.fits 2026-03-10 16:50:59,608 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_squj2g2e 2026-03-10 16:50:59,609 Read config from in: /tmp/ecc_context_ecc_cfg_1_squj2g2e/post_ecc.ini 2026-03-10 16:51:00,856 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_squj2g2e/solo_L1_stix-cal-energy_20250124_V03_ecc_in.fits 2026-03-10 17:00:23,960 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 17:00:30,461 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 17:00:30,468 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_squj2g2e 2026-03-10 17:00:30,493 Soop found: SOOP 2026-03-10 17:00:30,590 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/24/CAL/solo_CAL_stix-cal-energy_20250124T050349-20250124T072749_V02.fits 2026-03-10 17:00:30,748 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w97234i0 2026-03-10 17:00:30,749 Read config from in: /tmp/ecc_context_ecc_cfg_1_w97234i0/post_ecc.ini 2026-03-10 17:00:31,999 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w97234i0/solo_L1_stix-cal-energy_20250108_V03_ecc_in.fits 2026-03-10 17:10:06,498 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250108_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250108_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 17:10:14,236 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 17:10:14,242 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w97234i0 2026-03-10 17:10:14,267 Soop found: SOOP 2026-03-10 17:10:14,366 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/08/CAL/solo_CAL_stix-cal-energy_20250108T031730-20250108T054159_V02.fits 2026-03-10 17:10:14,531 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__bagkhfn 2026-03-10 17:10:14,531 Read config from in: /tmp/ecc_context_ecc_cfg_1__bagkhfn/post_ecc.ini 2026-03-10 17:10:15,807 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__bagkhfn/solo_L1_stix-cal-energy_20250105_V03_ecc_in.fits 2026-03-10 17:19:47,890 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250105_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250105_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 17:19:54,107 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 17:19:54,115 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__bagkhfn 2026-03-10 17:19:54,140 Soop found: SOOP 2026-03-10 17:19:54,236 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/05/CAL/solo_CAL_stix-cal-energy_20250105T031711-20250105T054110_V02.fits 2026-03-10 17:19:54,393 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3ujd9kjh 2026-03-10 17:19:54,394 Read config from in: /tmp/ecc_context_ecc_cfg_1_3ujd9kjh/post_ecc.ini 2026-03-10 17:19:55,637 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3ujd9kjh/solo_L1_stix-cal-energy_20250114_V03_ecc_in.fits 2026-03-10 17:29:19,394 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 17:29:25,673 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 17:29:25,680 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3ujd9kjh 2026-03-10 17:29:25,706 Soop found: SOOP 2026-03-10 17:29:25,804 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/14/CAL/solo_CAL_stix-cal-energy_20250114T042104-20250114T064504_V02.fits 2026-03-10 17:29:25,960 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g1hyiwf3 2026-03-10 17:29:25,961 Read config from in: /tmp/ecc_context_ecc_cfg_1_g1hyiwf3/post_ecc.ini 2026-03-10 17:29:27,243 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g1hyiwf3/solo_L1_stix-cal-energy_20250107_V03_ecc_in.fits 2026-03-10 17:39:03,840 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250107_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250107_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 17:39:10,086 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 17:39:10,092 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g1hyiwf3 2026-03-10 17:39:10,119 Soop found: SOOP 2026-03-10 17:39:10,213 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/07/CAL/solo_CAL_stix-cal-energy_20250107T031724-20250107T054123_V02.fits 2026-03-10 17:39:10,367 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_11l2a2hp 2026-03-10 17:39:10,368 Read config from in: /tmp/ecc_context_ecc_cfg_1_11l2a2hp/post_ecc.ini 2026-03-10 17:39:11,625 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_11l2a2hp/solo_L1_stix-cal-energy_20250120_V03_ecc_in.fits 2026-03-10 17:48:55,601 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250120_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250120_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 17:49:01,830 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 17:49:01,837 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_11l2a2hp 2026-03-10 17:49:01,864 Soop found: SOOP 2026-03-10 17:49:01,965 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/20/CAL/solo_CAL_stix-cal-energy_20250120T050326-20250120T072726_V02.fits 2026-03-10 17:49:02,122 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xlckx8mi 2026-03-10 17:49:02,123 Read config from in: /tmp/ecc_context_ecc_cfg_1_xlckx8mi/post_ecc.ini 2026-03-10 17:49:03,372 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xlckx8mi/solo_L1_stix-cal-energy_20250106_V03_ecc_in.fits 2026-03-10 17:58:20,463 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250106_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250106_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 17:58:26,760 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 17:58:26,768 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xlckx8mi 2026-03-10 17:58:26,798 Soop found: SOOP 2026-03-10 17:58:26,894 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/06/CAL/solo_CAL_stix-cal-energy_20250106T031718-20250106T054118_V02.fits 2026-03-10 17:58:27,050 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o_xvfwvk 2026-03-10 17:58:27,050 Read config from in: /tmp/ecc_context_ecc_cfg_1_o_xvfwvk/post_ecc.ini 2026-03-10 17:58:29,719 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o_xvfwvk/solo_L1_stix-cal-energy_20250103_V03_ecc_in.fits 2026-03-10 18:07:49,460 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250103_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250103_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 18:07:55,669 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 18:07:55,676 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o_xvfwvk 2026-03-10 18:07:55,702 Soop found: SOOP 2026-03-10 18:07:55,802 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/03/CAL/solo_CAL_stix-cal-energy_20250103T031556-20250103T054002_V02.fits 2026-03-10 18:07:55,964 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_emaic3_o 2026-03-10 18:07:55,965 Read config from in: /tmp/ecc_context_ecc_cfg_1_emaic3_o/post_ecc.ini 2026-03-10 18:07:57,207 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_emaic3_o/solo_L1_stix-cal-energy_20250117_V03_ecc_in.fits 2026-03-10 18:19:53,991 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250117_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250117_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 18:20:00,151 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 18:20:00,159 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_emaic3_o 2026-03-10 18:20:00,185 Soop found: SOOP 2026-03-10 18:20:00,282 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/17/CAL/solo_CAL_stix-cal-energy_20250117T042122-20250117T064522_V02.fits 2026-03-10 18:20:00,439 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l267qxzu 2026-03-10 18:20:00,439 Read config from in: /tmp/ecc_context_ecc_cfg_1_l267qxzu/post_ecc.ini 2026-03-10 18:20:01,680 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l267qxzu/solo_L1_stix-cal-energy_20250131_V03_ecc_in.fits 2026-03-10 18:31:52,692 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250131_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250131_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250131_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 18:31:59,084 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 18:31:59,091 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l267qxzu 2026-03-10 18:31:59,118 Soop found: SOOP 2026-03-10 18:31:59,215 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/31/CAL/solo_CAL_stix-cal-energy_20250131T055905-20250131T082527_V02.fits 2026-03-10 18:31:59,375 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_29vugrlj 2026-03-10 18:31:59,376 Read config from in: /tmp/ecc_context_ecc_cfg_1_29vugrlj/post_ecc.ini 2026-03-10 18:32:00,633 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_29vugrlj/solo_L1_stix-cal-energy_20250118_V03_ecc_in.fits 2026-03-10 18:41:35,036 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250118_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250118_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 18:41:41,285 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 18:41:41,293 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_29vugrlj 2026-03-10 18:41:41,318 Soop found: SOOP 2026-03-10 18:41:41,424 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/18/CAL/solo_CAL_stix-cal-energy_20250118T042128-20250118T064527_V02.fits 2026-03-10 18:41:41,595 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ld3py12l 2026-03-10 18:41:41,595 Read config from in: /tmp/ecc_context_ecc_cfg_1_ld3py12l/post_ecc.ini 2026-03-10 18:41:42,839 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ld3py12l/solo_L1_stix-cal-energy_20250123_V03_ecc_in.fits 2026-03-10 18:51:22,954 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250123_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250123_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 18:51:29,210 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 18:51:29,218 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ld3py12l 2026-03-10 18:51:29,245 Soop found: SOOP 2026-03-10 18:51:29,345 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/23/CAL/solo_CAL_stix-cal-energy_20250123T050344-20250123T072743_V02.fits 2026-03-10 18:51:29,503 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d_qw0_8n 2026-03-10 18:51:29,503 Read config from in: /tmp/ecc_context_ecc_cfg_1_d_qw0_8n/post_ecc.ini 2026-03-10 18:51:30,744 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d_qw0_8n/solo_L1_stix-cal-energy_20250116_V03_ecc_in.fits 2026-03-10 19:00:57,126 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250116_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250116_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 19:01:04,907 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 19:01:04,914 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d_qw0_8n 2026-03-10 19:01:04,939 Soop found: SOOP 2026-03-10 19:01:05,036 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/16/CAL/solo_CAL_stix-cal-energy_20250116T042116-20250116T064516_V02.fits 2026-03-10 19:01:05,194 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rsnfmkfb 2026-03-10 19:01:05,194 Read config from in: /tmp/ecc_context_ecc_cfg_1_rsnfmkfb/post_ecc.ini 2026-03-10 19:01:06,437 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rsnfmkfb/solo_L1_stix-cal-energy_20250121_V03_ecc_in.fits 2026-03-10 19:10:50,871 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250121_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250121_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 19:10:57,103 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 19:10:57,112 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rsnfmkfb 2026-03-10 19:10:57,139 Soop found: SOOP 2026-03-10 19:10:57,237 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/21/CAL/solo_CAL_stix-cal-energy_20250121T050332-20250121T072731_V02.fits 2026-03-10 19:10:57,396 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yk59m21_ 2026-03-10 19:10:57,397 Read config from in: /tmp/ecc_context_ecc_cfg_1_yk59m21_/post_ecc.ini 2026-03-10 19:10:58,640 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yk59m21_/solo_L1_stix-cal-energy_20250112_V03_ecc_in.fits 2026-03-10 19:20:26,115 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250112_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250112_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 19:20:32,364 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 19:20:32,371 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yk59m21_ 2026-03-10 19:20:32,397 Soop found: SOOP 2026-03-10 19:20:32,493 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/12/CAL/solo_CAL_stix-cal-energy_20250112T032549-20250112T055053_V02.fits 2026-03-10 19:20:32,661 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c4dwl7mh 2026-03-10 19:20:32,661 Read config from in: /tmp/ecc_context_ecc_cfg_1_c4dwl7mh/post_ecc.ini 2026-03-10 19:20:33,903 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c4dwl7mh/solo_L1_stix-cal-energy_20250127_V03_ecc_in.fits 2026-03-10 19:30:18,361 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250127_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250127_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 19:30:24,593 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 19:30:24,600 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c4dwl7mh 2026-03-10 19:30:24,626 Soop found: SOOP 2026-03-10 19:30:24,728 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/27/CAL/solo_CAL_stix-cal-energy_20250127T055840-20250127T082239_V02.fits 2026-03-10 19:30:24,890 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_90wz8qm9 2026-03-10 19:30:24,890 Read config from in: /tmp/ecc_context_ecc_cfg_1_90wz8qm9/post_ecc.ini 2026-03-10 19:30:26,128 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_90wz8qm9/solo_L1_stix-cal-energy_20250111_V03_ecc_in.fits 2026-03-10 19:39:53,860 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250111_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250111_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 19:40:00,033 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 19:40:00,040 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_90wz8qm9 2026-03-10 19:40:00,067 Soop found: SOOP 2026-03-10 19:40:00,161 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/11/CAL/solo_CAL_stix-cal-energy_20250111T032543-20250111T054942_V02.fits 2026-03-10 19:40:00,316 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ch34aopk 2026-03-10 19:40:00,317 Read config from in: /tmp/ecc_context_ecc_cfg_1_ch34aopk/post_ecc.ini 2026-03-10 19:40:01,563 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ch34aopk/solo_L1_stix-cal-energy_20250126_V03_ecc_in.fits 2026-03-10 19:49:29,863 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250126_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250126_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 19:49:36,021 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 19:49:36,029 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ch34aopk 2026-03-10 19:49:36,055 Soop found: SOOP 2026-03-10 19:49:36,148 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/26/CAL/solo_CAL_stix-cal-energy_20250126T050402-20250126T073111_V02.fits 2026-03-10 19:49:36,302 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4azp1m9v 2026-03-10 19:49:36,303 Read config from in: /tmp/ecc_context_ecc_cfg_1_4azp1m9v/post_ecc.ini 2026-03-10 19:49:37,529 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4azp1m9v/solo_L1_stix-cal-energy_20250119_V03_ecc_in.fits 2026-03-10 19:59:06,800 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250119_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250119_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 19:59:14,517 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 19:59:14,524 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4azp1m9v 2026-03-10 19:59:14,549 Soop found: SOOP 2026-03-10 19:59:14,646 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/19/CAL/solo_CAL_stix-cal-energy_20250119T042135-20250119T064551_V02.fits 2026-03-10 19:59:14,805 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2op3oaro 2026-03-10 19:59:14,806 Read config from in: /tmp/ecc_context_ecc_cfg_1_2op3oaro/post_ecc.ini 2026-03-10 19:59:16,046 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2op3oaro/solo_L1_stix-cal-energy_20250122_V03_ecc_in.fits 2026-03-10 20:08:48,779 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250122_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250122_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 20:08:55,089 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 20:08:55,096 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2op3oaro 2026-03-10 20:08:55,120 Soop found: SOOP 2026-03-10 20:08:55,214 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/22/CAL/solo_CAL_stix-cal-energy_20250122T050338-20250122T072738_V02.fits 2026-03-10 20:08:55,372 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qi5s0qqb 2026-03-10 20:08:55,373 Read config from in: /tmp/ecc_context_ecc_cfg_1_qi5s0qqb/post_ecc.ini 2026-03-10 20:08:56,613 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qi5s0qqb/solo_L1_stix-cal-energy_20250125_V03_ecc_in.fits 2026-03-10 20:18:32,466 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250125_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250125_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 20:18:38,668 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 20:18:38,675 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qi5s0qqb 2026-03-10 20:18:38,700 Soop found: SOOP 2026-03-10 20:18:38,797 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/25/CAL/solo_CAL_stix-cal-energy_20250125T050356-20250125T072756_V02.fits 2026-03-10 20:18:38,961 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qogvwstv 2026-03-10 20:18:38,962 Read config from in: /tmp/ecc_context_ecc_cfg_1_qogvwstv/post_ecc.ini 2026-03-10 20:18:40,215 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qogvwstv/solo_L1_stix-cal-energy_20250128_V03_ecc_in.fits 2026-03-10 20:28:18,586 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250128_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250128_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 20:28:24,843 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 20:28:24,851 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qogvwstv 2026-03-10 20:28:24,875 Soop found: SOOP 2026-03-10 20:28:24,970 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/28/CAL/solo_CAL_stix-cal-energy_20250128T055846-20250128T082245_V02.fits 2026-03-10 20:28:25,132 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1hhh6xii 2026-03-10 20:28:25,133 Read config from in: /tmp/ecc_context_ecc_cfg_1_1hhh6xii/post_ecc.ini 2026-03-10 20:28:26,376 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1hhh6xii/solo_L1_stix-cal-energy_20250109_V03_ecc_in.fits 2026-03-10 20:37:50,753 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250109_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250109_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 20:37:57,176 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 20:37:57,183 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1hhh6xii 2026-03-10 20:37:57,217 Soop found: SOOP 2026-03-10 20:37:57,313 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/09/CAL/solo_CAL_stix-cal-energy_20250109T032528-20250109T054928_V02.fits 2026-03-10 20:37:57,470 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_97vm1sfp 2026-03-10 20:37:57,470 Read config from in: /tmp/ecc_context_ecc_cfg_1_97vm1sfp/post_ecc.ini 2026-03-10 20:37:58,716 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_97vm1sfp/solo_L1_stix-cal-energy_20250129_V03_ecc_in.fits 2026-03-10 20:47:27,572 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250129_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250129_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 20:47:33,815 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 20:47:33,822 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_97vm1sfp 2026-03-10 20:47:33,846 Soop found: SOOP 2026-03-10 20:47:33,940 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/29/CAL/solo_CAL_stix-cal-energy_20250129T055852-20250129T082251_V02.fits 2026-03-10 20:47:34,095 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fzqztyox 2026-03-10 20:47:34,096 Read config from in: /tmp/ecc_context_ecc_cfg_1_fzqztyox/post_ecc.ini 2026-03-10 20:47:36,711 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fzqztyox/solo_L1_stix-cal-energy_20250102_V03_ecc_in.fits 2026-03-10 20:57:15,002 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250102_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250102_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 20:57:21,234 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 20:57:21,246 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fzqztyox 2026-03-10 20:57:21,275 Soop found: SOOP 2026-03-10 20:57:21,372 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/02/CAL/solo_CAL_stix-cal-energy_20250102T031550-20250102T053950_V02.fits 2026-03-10 20:57:21,533 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xozvb5u3 2026-03-10 20:57:21,534 Read config from in: /tmp/ecc_context_ecc_cfg_1_xozvb5u3/post_ecc.ini 2026-03-10 20:57:22,772 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xozvb5u3/solo_L1_stix-cal-energy_20250113_V03_ecc_in.fits 2026-03-10 21:06:45,921 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250113_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250113_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 21:06:52,128 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 21:06:52,135 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xozvb5u3 2026-03-10 21:06:52,161 Soop found: SOOP 2026-03-10 21:06:52,255 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/13/CAL/solo_CAL_stix-cal-energy_20250113T042059-20250113T064458_V02.fits 2026-03-10 21:06:52,408 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fjl0w5e6 2026-03-10 21:06:52,409 Read config from in: /tmp/ecc_context_ecc_cfg_1_fjl0w5e6/post_ecc.ini 2026-03-10 21:06:53,637 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fjl0w5e6/solo_L1_stix-cal-energy_20250115_V03_ecc_in.fits 2026-03-10 21:16:23,718 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250115_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250115_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 21:16:29,989 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 21:16:29,996 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fjl0w5e6 2026-03-10 21:16:30,026 Soop found: SOOP 2026-03-10 21:16:30,120 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/15/CAL/solo_CAL_stix-cal-energy_20250115T042110-20250115T064510_V02.fits 2026-03-10 21:16:30,282 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hc__8kxo 2026-03-10 21:16:30,284 Read config from in: /tmp/ecc_context_ecc_cfg_1_hc__8kxo/post_ecc.ini 2026-03-10 21:16:31,522 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hc__8kxo/solo_L1_stix-cal-energy_20250104_V03_ecc_in.fits 2026-03-10 21:25:53,139 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250104_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250104_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 21:26:00,095 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 21:26:00,103 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hc__8kxo 2026-03-10 21:26:00,131 Soop found: SOOP 2026-03-10 21:26:00,232 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/04/CAL/solo_CAL_stix-cal-energy_20250104T031705-20250104T054105_V02.fits 2026-03-10 21:26:00,398 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ghmtm9ny 2026-03-10 21:26:00,399 Read config from in: /tmp/ecc_context_ecc_cfg_1_ghmtm9ny/post_ecc.ini 2026-03-10 21:26:01,666 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ghmtm9ny/solo_L1_stix-cal-energy_20250830_V03_ecc_in.fits 2026-03-10 21:36:03,189 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250830_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250830_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250830_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250830_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 21:36:09,505 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 21:36:09,512 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ghmtm9ny 2026-03-10 21:36:09,541 Soop found: SOOP 2026-03-10 21:36:09,641 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/30/CAL/solo_CAL_stix-cal-energy_20250830T024245-20250830T050645_V02.fits 2026-03-10 21:36:09,799 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xyonj33u 2026-03-10 21:36:09,800 Read config from in: /tmp/ecc_context_ecc_cfg_1_xyonj33u/post_ecc.ini 2026-03-10 21:36:11,046 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xyonj33u/solo_L1_stix-cal-energy_20250810_V03_ecc_in.fits 2026-03-10 21:45:39,797 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250810_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250810_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250810_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250810_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 21:45:47,517 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 21:45:47,524 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xyonj33u 2026-03-10 21:45:47,548 Soop found: SOOP 2026-03-10 21:45:47,648 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/10/CAL/solo_CAL_stix-cal-energy_20250810T045427-20250810T072813_V02.fits 2026-03-10 21:45:47,803 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gu4afzgg 2026-03-10 21:45:47,803 Read config from in: /tmp/ecc_context_ecc_cfg_1_gu4afzgg/post_ecc.ini 2026-03-10 21:45:49,036 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gu4afzgg/solo_L1_stix-cal-energy_20250801_V03_ecc_in.fits 2026-03-10 21:55:34,637 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250801_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250801_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250801_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250801_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 21:55:40,878 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 21:55:40,887 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gu4afzgg 2026-03-10 21:55:40,913 Soop found: SOOP 2026-03-10 21:55:41,010 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/01/CAL/solo_CAL_stix-cal-energy_20250801T024721-20250801T051121_V02.fits 2026-03-10 21:55:41,165 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_13alz426 2026-03-10 21:55:41,166 Read config from in: /tmp/ecc_context_ecc_cfg_1_13alz426/post_ecc.ini 2026-03-10 21:55:42,400 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_13alz426/solo_L1_stix-cal-energy_20250824_V03_ecc_in.fits 2026-03-10 22:05:17,108 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250824_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250824_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250824_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250824_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 22:05:23,542 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-10 22:05:23,549 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_13alz426 2026-03-10 22:05:23,574 Soop found: SOOP 2026-03-10 22:05:23,671 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/24/CAL/solo_CAL_stix-cal-energy_20250824T112521-20250824T135312_V02.fits 2026-03-10 22:05:23,834 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mf3gylx_ 2026-03-10 22:05:23,835 Read config from in: /tmp/ecc_context_ecc_cfg_1_mf3gylx_/post_ecc.ini 2026-03-10 22:05:25,063 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mf3gylx_/solo_L1_stix-cal-energy_20250808_V03_ecc_in.fits 2026-03-10 22:14:56,915 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250808_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250808_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250808_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250808_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 22:15:03,195 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 22:15:03,201 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mf3gylx_ 2026-03-10 22:15:03,227 Soop found: SOOP 2026-03-10 22:15:03,324 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/08/CAL/solo_CAL_stix-cal-energy_20250808T045415-20250808T071814_V02.fits 2026-03-10 22:15:03,480 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wh91d29e 2026-03-10 22:15:03,481 Read config from in: /tmp/ecc_context_ecc_cfg_1_wh91d29e/post_ecc.ini 2026-03-10 22:15:04,762 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wh91d29e/solo_L1_stix-cal-energy_20250805_V03_ecc_in.fits 2026-03-10 22:24:29,857 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250805_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250805_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250805_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250805_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 22:24:36,106 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 22:24:36,116 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wh91d29e 2026-03-10 22:24:36,151 Soop found: SOOP 2026-03-10 22:24:36,263 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/05/CAL/solo_CAL_stix-cal-energy_20250805T042120-20250805T064535_V02.fits 2026-03-10 22:24:36,421 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yiitlige 2026-03-10 22:24:36,422 Read config from in: /tmp/ecc_context_ecc_cfg_1_yiitlige/post_ecc.ini 2026-03-10 22:24:37,696 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yiitlige/solo_L1_stix-cal-energy_20250814_V03_ecc_in.fits 2026-03-10 22:33:58,954 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250814_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250814_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250814_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250814_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 22:34:06,597 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 22:34:06,603 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yiitlige 2026-03-10 22:34:06,627 Soop found: SOOP 2026-03-10 22:34:06,723 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/14/CAL/solo_CAL_stix-cal-energy_20250814T085920-20250814T112319_V02.fits 2026-03-10 22:34:06,878 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rcn1jakt 2026-03-10 22:34:06,878 Read config from in: /tmp/ecc_context_ecc_cfg_1_rcn1jakt/post_ecc.ini 2026-03-10 22:34:08,106 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rcn1jakt/solo_L1_stix-cal-energy_20250807_V03_ecc_in.fits 2026-03-10 22:43:29,957 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250807_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250807_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250807_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250807_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 22:43:36,184 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 22:43:36,191 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rcn1jakt 2026-03-10 22:43:36,215 Soop found: SOOP 2026-03-10 22:43:36,311 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/07/CAL/solo_CAL_stix-cal-energy_20250807T045409-20250807T071809_V02.fits 2026-03-10 22:43:36,469 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fk0snnug 2026-03-10 22:43:36,470 Read config from in: /tmp/ecc_context_ecc_cfg_1_fk0snnug/post_ecc.ini 2026-03-10 22:43:37,705 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fk0snnug/solo_L1_stix-cal-energy_20250820_V03_ecc_in.fits 2026-03-10 22:53:47,666 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250820_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250820_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250820_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250820_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 22:53:54,725 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 22:53:54,733 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fk0snnug 2026-03-10 22:53:54,761 Soop found: SOOP 2026-03-10 22:53:54,866 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/20/CAL/solo_CAL_stix-cal-energy_20250820T110659-20250820T133059_V02.fits 2026-03-10 22:53:55,035 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lbffaw8p 2026-03-10 22:53:55,036 Read config from in: /tmp/ecc_context_ecc_cfg_1_lbffaw8p/post_ecc.ini 2026-03-10 22:53:56,306 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lbffaw8p/solo_L1_stix-cal-energy_20250806_V03_ecc_in.fits 2026-03-10 23:03:20,325 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250806_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250806_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250806_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250806_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 23:03:26,798 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 23:03:26,805 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lbffaw8p 2026-03-10 23:03:26,829 Soop found: SOOP 2026-03-10 23:03:26,923 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/06/CAL/solo_CAL_stix-cal-energy_20250806T045403-20250806T071802_V02.fits 2026-03-10 23:03:27,082 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__n307ql0 2026-03-10 23:03:27,082 Read config from in: /tmp/ecc_context_ecc_cfg_1__n307ql0/post_ecc.ini 2026-03-10 23:03:28,322 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__n307ql0/solo_L1_stix-cal-energy_20250803_V03_ecc_in.fits 2026-03-10 23:13:04,056 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250803_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250803_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250803_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250803_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 23:13:10,320 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 23:13:10,328 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__n307ql0 2026-03-10 23:13:10,355 Soop found: SOOP 2026-03-10 23:13:10,455 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/03/CAL/solo_CAL_stix-cal-energy_20250803T024733-20250803T051336_V02.fits 2026-03-10 23:13:10,611 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c63m2xhx 2026-03-10 23:13:10,612 Read config from in: /tmp/ecc_context_ecc_cfg_1_c63m2xhx/post_ecc.ini 2026-03-10 23:13:11,865 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c63m2xhx/solo_L1_stix-cal-energy_20250817_V03_ecc_in.fits 2026-03-10 23:23:01,562 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250817_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250817_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250817_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250817_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 23:23:07,845 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 23:23:07,851 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c63m2xhx 2026-03-10 23:23:07,877 Soop found: SOOP 2026-03-10 23:23:07,971 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/17/CAL/solo_CAL_stix-cal-energy_20250817T085937-20250817T112746_V02.fits 2026-03-10 23:23:08,133 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7d2pj8bu 2026-03-10 23:23:08,134 Read config from in: /tmp/ecc_context_ecc_cfg_1_7d2pj8bu/post_ecc.ini 2026-03-10 23:23:10,718 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7d2pj8bu/solo_L1_stix-cal-energy_20250831_V03_ecc_in.fits 2026-03-10 23:33:00,463 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250831_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250831_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250831_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250831_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 23:33:06,739 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 23:33:06,746 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7d2pj8bu 2026-03-10 23:33:06,771 Soop found: SOOP 2026-03-10 23:33:06,870 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/31/CAL/solo_CAL_stix-cal-energy_20250831T024253-20250831T050652_V02.fits 2026-03-10 23:33:07,025 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ssdc2tvj 2026-03-10 23:33:07,026 Read config from in: /tmp/ecc_context_ecc_cfg_1_ssdc2tvj/post_ecc.ini 2026-03-10 23:33:08,304 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ssdc2tvj/solo_L1_stix-cal-energy_20250818_V03_ecc_in.fits 2026-03-10 23:42:49,351 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250818_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250818_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250818_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250818_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 23:42:55,688 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-10 23:42:55,696 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ssdc2tvj 2026-03-10 23:42:55,722 Soop found: SOOP 2026-03-10 23:42:55,817 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/18/CAL/solo_CAL_stix-cal-energy_20250818T094121-20250818T120522_V02.fits 2026-03-10 23:42:55,972 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4x2kqkw7 2026-03-10 23:42:55,973 Read config from in: /tmp/ecc_context_ecc_cfg_1_4x2kqkw7/post_ecc.ini 2026-03-10 23:42:57,207 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4x2kqkw7/solo_L1_stix-cal-energy_20250823_V03_ecc_in.fits 2026-03-10 23:52:46,035 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250823_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250823_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250823_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250823_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-10 23:52:52,393 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-10 23:52:52,395 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-10 23:52:52,399 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4x2kqkw7 2026-03-10 23:52:52,424 Soop found: SOOP 2026-03-10 23:52:52,522 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/23/CAL/solo_CAL_stix-cal-energy_20250823T112515-20250823T134914_V02.fits 2026-03-10 23:52:52,678 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oyeq7ykv 2026-03-10 23:52:52,679 Read config from in: /tmp/ecc_context_ecc_cfg_1_oyeq7ykv/post_ecc.ini 2026-03-10 23:52:53,916 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oyeq7ykv/solo_L1_stix-cal-energy_20250816_V03_ecc_in.fits 2026-03-11 00:02:40,843 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250816_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250816_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250816_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250816_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 00:02:47,276 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 00:02:47,282 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oyeq7ykv 2026-03-11 00:02:47,307 Soop found: SOOP 2026-03-11 00:02:47,404 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/16/CAL/solo_CAL_stix-cal-energy_20250816T085931-20250816T112331_V02.fits 2026-03-11 00:02:47,811 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kx_fh7p0 2026-03-11 00:02:47,811 Read config from in: /tmp/ecc_context_ecc_cfg_1_kx_fh7p0/post_ecc.ini 2026-03-11 00:02:49,078 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kx_fh7p0/solo_L1_stix-cal-energy_20250821_V03_ecc_in.fits 2026-03-11 00:20:26,663 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250821_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250821_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250821_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250821_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 108 is dead pixel 115 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 00:20:47,856 Run ecc post fit: replaced [89.3 %] gain offset pairs with 'better fits' 2026-03-11 00:20:47,861 ECC result Gain_Prime 1.6152529721220878 for DET 4 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 00:20:47,861 ECC result Gain_Prime 1.6170848724812346 for DET 5 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 00:20:47,861 ECC result Gain_Prime 1.6159643800184833 for DET 6 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 00:20:47,861 ECC result Gain_Prime 1.6152628849288324 for DET 16 PIX 5 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 00:20:47,861 ECC result Gain_Prime 1.615258822534976 for DET 16 PIX 7 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 00:20:47,861 ECC result Gain_Prime 1.6137383750749934 for DET 29 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 00:20:47,862 ECC result Gain_Prime 0.0 for DET 6 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,862 ECC result Gain_Prime 0.0 for DET 7 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,862 ECC result Gain_Prime 0.0 for DET 9 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,862 ECC result Gain_Prime 0.0 for DET 9 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,862 ECC result Gain_Prime 0.0 for DET 13 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,862 ECC result Gain_Prime 0.0 for DET 13 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,862 ECC result Gain_Prime 0.0 for DET 13 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 14 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 16 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 16 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 16 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 17 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 18 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 20 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 21 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,863 ECC result Gain_Prime 0.0 for DET 23 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 23 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 23 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 24 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 24 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 24 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 26 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 26 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 27 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,864 ECC result Gain_Prime 0.0 for DET 28 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,865 ECC result Gain_Prime 0.0 for DET 29 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,865 ECC result Gain_Prime 0.0 for DET 30 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,865 ECC result Gain_Prime 0.0 for DET 30 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,865 ECC result Gain_Prime 0.0 for DET 30 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,865 ECC result Gain_Prime 0.0 for DET 31 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,865 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,865 ECC result Gain_Prime 0.0 for DET 32 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,865 ECC result Gain_Prime 0.0 for DET 32 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 00:20:47,866 ECC result Gain_Cor 0.0 for DET 10 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-03-11 00:20:47,866 ECC result Gain_Cor 0.0 for DET 10 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-03-11 00:20:47,871 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kx_fh7p0 2026-03-11 00:20:47,905 Soop found: SOOP 2026-03-11 00:20:48,013 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/21/CAL/solo_CAL_stix-cal-energy_20250821T110706-20250821T133253_V02.fits 2026-03-11 00:20:48,183 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wxj62wkh 2026-03-11 00:20:48,183 Read config from in: /tmp/ecc_context_ecc_cfg_1_wxj62wkh/post_ecc.ini 2026-03-11 00:20:49,475 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wxj62wkh/solo_L1_stix-cal-energy_20250812_V03_ecc_in.fits 2026-03-11 00:30:18,748 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250812_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250812_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250812_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250812_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 00:30:26,609 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 00:30:26,616 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wxj62wkh 2026-03-11 00:30:26,641 Soop found: SOOP 2026-03-11 00:30:26,735 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/12/CAL/solo_CAL_stix-cal-energy_20250812T083058-20250812T105510_V02.fits 2026-03-11 00:30:26,895 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qp3u7kv5 2026-03-11 00:30:26,896 Read config from in: /tmp/ecc_context_ecc_cfg_1_qp3u7kv5/post_ecc.ini 2026-03-11 00:30:28,130 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qp3u7kv5/solo_L1_stix-cal-energy_20250827_V03_ecc_in.fits 2026-03-11 00:40:31,926 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250827_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250827_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250827_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250827_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 00:40:38,117 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 00:40:38,124 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qp3u7kv5 2026-03-11 00:40:38,150 Soop found: SOOP 2026-03-11 00:40:38,249 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/27/CAL/solo_CAL_stix-cal-energy_20250827T002432-20250827T024831_V02.fits 2026-03-11 00:40:38,406 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_82bss9rc 2026-03-11 00:40:38,407 Read config from in: /tmp/ecc_context_ecc_cfg_1_82bss9rc/post_ecc.ini 2026-03-11 00:40:39,638 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_82bss9rc/solo_L1_stix-cal-energy_20250811_V03_ecc_in.fits 2026-03-11 00:49:56,532 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250811_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250811_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250811_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250811_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 00:50:02,856 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 00:50:02,866 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_82bss9rc 2026-03-11 00:50:02,906 Soop found: SOOP 2026-03-11 00:50:03,010 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/11/CAL/solo_CAL_stix-cal-energy_20250811T083052-20250811T105451_V02.fits 2026-03-11 00:50:03,177 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7nv6pka4 2026-03-11 00:50:03,178 Read config from in: /tmp/ecc_context_ecc_cfg_1_7nv6pka4/post_ecc.ini 2026-03-11 00:50:04,427 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7nv6pka4/solo_L1_stix-cal-energy_20250826_V03_ecc_in.fits 2026-03-11 00:59:32,228 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250826_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250826_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250826_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250826_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 00:59:38,568 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 00:59:38,575 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7nv6pka4 2026-03-11 00:59:38,600 Soop found: SOOP 2026-03-11 00:59:38,693 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/26/CAL/solo_CAL_stix-cal-energy_20250826T123804-20250826T134615_V02.fits 2026-03-11 00:59:38,850 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2tzavqw7 2026-03-11 00:59:38,851 Read config from in: /tmp/ecc_context_ecc_cfg_1_2tzavqw7/post_ecc.ini 2026-03-11 00:59:40,099 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2tzavqw7/solo_L1_stix-cal-energy_20250819_V03_ecc_in.fits 2026-03-11 01:09:20,711 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250819_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250819_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250819_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250819_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 01:09:27,072 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 01:09:27,080 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2tzavqw7 2026-03-11 01:09:27,106 Soop found: SOOP 2026-03-11 01:09:27,200 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/19/CAL/solo_CAL_stix-cal-energy_20250819T094128-20250819T120745_V02.fits 2026-03-11 01:09:27,369 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__v6izha7 2026-03-11 01:09:27,369 Read config from in: /tmp/ecc_context_ecc_cfg_1__v6izha7/post_ecc.ini 2026-03-11 01:09:28,614 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__v6izha7/solo_L1_stix-cal-energy_20250822_V03_ecc_in.fits 2026-03-11 01:22:03,105 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250822_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250822_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250822_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250822_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 01:22:09,651 Run ecc post fit: replaced [99.2 %] gain offset pairs with 'better fits' 2026-03-11 01:22:09,653 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 01:22:09,653 ECC result Gain_Prime 0.0 for DET 2 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 01:22:09,653 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 01:22:09,659 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__v6izha7 2026-03-11 01:22:09,684 Soop found: SOOP 2026-03-11 01:22:09,777 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/22/CAL/solo_CAL_stix-cal-energy_20250822T112509-20250822T134909_V02.fits 2026-03-11 01:22:09,933 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yb4x9c7q 2026-03-11 01:22:09,934 Read config from in: /tmp/ecc_context_ecc_cfg_1_yb4x9c7q/post_ecc.ini 2026-03-11 01:22:12,534 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yb4x9c7q/solo_L1_stix-cal-energy_20250825_V03_ecc_in.fits 2026-03-11 01:31:56,203 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250825_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250825_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250825_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250825_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 01:32:02,405 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 01:32:02,412 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yb4x9c7q 2026-03-11 01:32:02,436 Soop found: SOOP 2026-03-11 01:32:02,529 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/25/CAL/solo_CAL_stix-cal-energy_20250825T123758-20250825T150158_V02.fits 2026-03-11 01:32:02,685 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_227y1cp3 2026-03-11 01:32:02,686 Read config from in: /tmp/ecc_context_ecc_cfg_1_227y1cp3/post_ecc.ini 2026-03-11 01:32:03,920 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_227y1cp3/solo_L1_stix-cal-energy_20250828_V03_ecc_in.fits 2026-03-11 01:41:46,492 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250828_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250828_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250828_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250828_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 01:41:52,692 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 01:41:52,699 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_227y1cp3 2026-03-11 01:41:52,723 Soop found: SOOP 2026-03-11 01:41:52,816 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/28/CAL/solo_CAL_stix-cal-energy_20250828T002438-20250828T025034_V02.fits 2026-03-11 01:41:52,965 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b86rf6eq 2026-03-11 01:41:52,966 Read config from in: /tmp/ecc_context_ecc_cfg_1_b86rf6eq/post_ecc.ini 2026-03-11 01:41:54,193 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b86rf6eq/solo_L1_stix-cal-energy_20250809_V03_ecc_in.fits 2026-03-11 01:51:17,003 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250809_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250809_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250809_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250809_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 01:51:23,251 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 01:51:23,258 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b86rf6eq 2026-03-11 01:51:23,282 Soop found: SOOP 2026-03-11 01:51:23,377 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/09/CAL/solo_CAL_stix-cal-energy_20250809T045421-20250809T071821_V02.fits 2026-03-11 01:51:23,531 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tnd91xuk 2026-03-11 01:51:23,531 Read config from in: /tmp/ecc_context_ecc_cfg_1_tnd91xuk/post_ecc.ini 2026-03-11 01:51:24,787 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tnd91xuk/solo_L1_stix-cal-energy_20250829_V03_ecc_in.fits 2026-03-11 02:01:03,744 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250829_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250829_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250829_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250829_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 02:01:10,052 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 02:01:10,059 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tnd91xuk 2026-03-11 02:01:10,084 Soop found: SOOP 2026-03-11 02:01:10,178 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/29/CAL/solo_CAL_stix-cal-energy_20250829T022858-20250829T045301_V02.fits 2026-03-11 02:01:10,332 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i45go_ty 2026-03-11 02:01:10,332 Read config from in: /tmp/ecc_context_ecc_cfg_1_i45go_ty/post_ecc.ini 2026-03-11 02:01:11,585 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i45go_ty/solo_L1_stix-cal-energy_20250802_V03_ecc_in.fits 2026-03-11 02:10:52,133 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250802_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250802_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250802_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250802_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 02:10:58,345 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 02:10:58,352 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i45go_ty 2026-03-11 02:10:58,378 Soop found: SOOP 2026-03-11 02:10:58,473 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/02/CAL/solo_CAL_stix-cal-energy_20250802T024727-20250802T051127_V02.fits 2026-03-11 02:10:58,631 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5d900m95 2026-03-11 02:10:58,632 Read config from in: /tmp/ecc_context_ecc_cfg_1_5d900m95/post_ecc.ini 2026-03-11 02:10:59,922 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5d900m95/solo_L1_stix-cal-energy_20250813_V03_ecc_in.fits 2026-03-11 02:20:34,888 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250813_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250813_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250813_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250813_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 02:20:42,528 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 02:20:42,535 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5d900m95 2026-03-11 02:20:42,560 Soop found: SOOP 2026-03-11 02:20:42,653 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/13/CAL/solo_CAL_stix-cal-energy_20250813T085914-20250813T112313_V02.fits 2026-03-11 02:20:42,807 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tfj26gxn 2026-03-11 02:20:42,807 Read config from in: /tmp/ecc_context_ecc_cfg_1_tfj26gxn/post_ecc.ini 2026-03-11 02:20:44,040 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tfj26gxn/solo_L1_stix-cal-energy_20250815_V03_ecc_in.fits 2026-03-11 02:30:34,132 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250815_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250815_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250815_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250815_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 02:30:40,392 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 02:30:40,399 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tfj26gxn 2026-03-11 02:30:40,425 Soop found: SOOP 2026-03-11 02:30:40,519 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/15/CAL/solo_CAL_stix-cal-energy_20250815T085926-20250815T112325_V02.fits 2026-03-11 02:30:40,673 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s8zz13hz 2026-03-11 02:30:40,674 Read config from in: /tmp/ecc_context_ecc_cfg_1_s8zz13hz/post_ecc.ini 2026-03-11 02:30:41,909 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s8zz13hz/solo_L1_stix-cal-energy_20250804_V03_ecc_in.fits 2026-03-11 02:40:16,878 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250804_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250804_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250804_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250804_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 02:40:23,125 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 02:40:23,133 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s8zz13hz 2026-03-11 02:40:23,162 Soop found: SOOP 2026-03-11 02:40:23,266 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/04/CAL/solo_CAL_stix-cal-energy_20250804T042112-20250804T064511_V02.fits 2026-03-11 02:40:23,431 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qcyukzki 2026-03-11 02:40:23,432 Read config from in: /tmp/ecc_context_ecc_cfg_1_qcyukzki/post_ecc.ini 2026-03-11 02:40:24,672 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qcyukzki/solo_L1_stix-cal-energy_20250530_V03_ecc_in.fits 2026-03-11 02:49:59,494 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250530_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250530_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250530_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250530_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 02:50:05,747 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 02:50:05,755 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qcyukzki 2026-03-11 02:50:05,784 Soop found: SOOP 2026-03-11 02:50:05,892 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/30/CAL/solo_CAL_stix-cal-energy_20250530T063441-20250530T090040_V02.fits 2026-03-11 02:50:06,050 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mtj_k657 2026-03-11 02:50:06,050 Read config from in: /tmp/ecc_context_ecc_cfg_1_mtj_k657/post_ecc.ini 2026-03-11 02:50:07,292 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mtj_k657/solo_L1_stix-cal-energy_20250510_V03_ecc_in.fits 2026-03-11 03:00:02,515 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250510_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250510_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250510_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250510_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 03:00:08,793 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 03:00:08,800 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mtj_k657 2026-03-11 03:00:08,827 Soop found: SOOP 2026-03-11 03:00:08,931 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/10/CAL/solo_CAL_stix-cal-energy_20250510T044742-20250510T071142_V02.fits 2026-03-11 03:00:09,092 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r75j1izu 2026-03-11 03:00:09,093 Read config from in: /tmp/ecc_context_ecc_cfg_1_r75j1izu/post_ecc.ini 2026-03-11 03:00:10,350 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r75j1izu/solo_L1_stix-cal-energy_20250501_V03_ecc_in.fits 2026-03-11 03:09:40,977 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250501_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250501_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250501_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250501_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 03:09:47,205 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 03:09:47,213 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r75j1izu 2026-03-11 03:09:47,239 Soop found: SOOP 2026-03-11 03:09:47,339 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/01/CAL/solo_CAL_stix-cal-energy_20250501T031927-20250501T052330_V02.fits 2026-03-11 03:09:47,505 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_izus5hag 2026-03-11 03:09:47,506 Read config from in: /tmp/ecc_context_ecc_cfg_1_izus5hag/post_ecc.ini 2026-03-11 03:09:50,212 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_izus5hag/solo_L1_stix-cal-energy_20250524_V03_ecc_in.fits 2026-03-11 03:19:46,766 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250524_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250524_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250524_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250524_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 03:19:53,022 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 03:19:53,029 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_izus5hag 2026-03-11 03:19:53,052 Soop found: SOOP 2026-03-11 03:19:53,148 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/24/CAL/solo_CAL_stix-cal-energy_20250524T020800-20250524T043159_V02.fits 2026-03-11 03:19:53,301 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__o5mek8a 2026-03-11 03:19:53,302 Read config from in: /tmp/ecc_context_ecc_cfg_1__o5mek8a/post_ecc.ini 2026-03-11 03:19:54,535 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__o5mek8a/solo_L1_stix-cal-energy_20250508_V03_ecc_in.fits 2026-03-11 03:30:05,200 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250508_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250508_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250508_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250508_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 03:30:11,435 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 03:30:11,443 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__o5mek8a 2026-03-11 03:30:11,468 Soop found: SOOP 2026-03-11 03:30:11,567 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/08/CAL/solo_CAL_stix-cal-energy_20250508T044731-20250508T071130_V02.fits 2026-03-11 03:30:11,723 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dj4vruzi 2026-03-11 03:30:11,724 Read config from in: /tmp/ecc_context_ecc_cfg_1_dj4vruzi/post_ecc.ini 2026-03-11 03:30:12,958 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dj4vruzi/solo_L1_stix-cal-energy_20250505_V03_ecc_in.fits 2026-03-11 03:40:05,521 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250505_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250505_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250505_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250505_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 03:40:11,809 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 03:40:11,815 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dj4vruzi 2026-03-11 03:40:11,841 Soop found: SOOP 2026-03-11 03:40:11,937 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/05/CAL/solo_CAL_stix-cal-energy_20250505T044708-20250505T071108_V02.fits 2026-03-11 03:40:12,098 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5861l88u 2026-03-11 03:40:12,099 Read config from in: /tmp/ecc_context_ecc_cfg_1_5861l88u/post_ecc.ini 2026-03-11 03:40:13,339 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5861l88u/solo_L1_stix-cal-energy_20250514_V03_ecc_in.fits 2026-03-11 03:50:07,400 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250514_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250514_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250514_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250514_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 03:50:13,681 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 03:50:13,688 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5861l88u 2026-03-11 03:50:13,714 Soop found: SOOP 2026-03-11 03:50:13,811 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/14/CAL/solo_CAL_stix-cal-energy_20250514T093520-20250514T120319_V02.fits 2026-03-11 03:50:13,966 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cpcerdx7 2026-03-11 03:50:13,967 Read config from in: /tmp/ecc_context_ecc_cfg_1_cpcerdx7/post_ecc.ini 2026-03-11 03:50:15,219 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cpcerdx7/solo_L1_stix-cal-energy_20250507_V03_ecc_in.fits 2026-03-11 04:00:21,940 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250507_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250507_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250507_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250507_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 04:00:28,225 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 04:00:28,232 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cpcerdx7 2026-03-11 04:00:28,258 Soop found: SOOP 2026-03-11 04:00:28,359 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/07/CAL/solo_CAL_stix-cal-energy_20250507T044725-20250507T071125_V02.fits 2026-03-11 04:00:28,517 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6uzqb22q 2026-03-11 04:00:28,518 Read config from in: /tmp/ecc_context_ecc_cfg_1_6uzqb22q/post_ecc.ini 2026-03-11 04:00:29,772 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6uzqb22q/solo_L1_stix-cal-energy_20250520_V03_ecc_in.fits 2026-03-11 04:10:25,402 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250520_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250520_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250520_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250520_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 04:10:33,179 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 04:10:33,186 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6uzqb22q 2026-03-11 04:10:33,212 Soop found: SOOP 2026-03-11 04:10:33,308 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/20/CAL/solo_CAL_stix-cal-energy_20250520T002207-20250520T024843_V02.fits 2026-03-11 04:10:33,465 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ooc7amm6 2026-03-11 04:10:33,465 Read config from in: /tmp/ecc_context_ecc_cfg_1_ooc7amm6/post_ecc.ini 2026-03-11 04:10:34,696 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ooc7amm6/solo_L1_stix-cal-energy_20250506_V03_ecc_in.fits 2026-03-11 04:20:41,939 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250506_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250506_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250506_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250506_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 04:20:48,165 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 04:20:48,172 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ooc7amm6 2026-03-11 04:20:48,196 Soop found: SOOP 2026-03-11 04:20:48,294 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/06/CAL/solo_CAL_stix-cal-energy_20250506T044719-20250506T071118_V02.fits 2026-03-11 04:20:48,445 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xhk433ja 2026-03-11 04:20:48,445 Read config from in: /tmp/ecc_context_ecc_cfg_1_xhk433ja/post_ecc.ini 2026-03-11 04:20:49,682 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xhk433ja/solo_L1_stix-cal-energy_20250503_V03_ecc_in.fits 2026-03-11 04:30:26,171 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250503_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250503_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250503_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250503_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 04:30:32,425 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 04:30:32,432 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xhk433ja 2026-03-11 04:30:32,456 Soop found: SOOP 2026-03-11 04:30:32,555 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/03/CAL/solo_CAL_stix-cal-energy_20250503T000521-20250503T022921_V02.fits 2026-03-11 04:30:32,722 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__wzichhu 2026-03-11 04:30:32,723 Read config from in: /tmp/ecc_context_ecc_cfg_1__wzichhu/post_ecc.ini 2026-03-11 04:30:33,976 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__wzichhu/solo_L1_stix-cal-energy_20250517_V03_ecc_in.fits 2026-03-11 04:40:31,075 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250517_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250517_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250517_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250517_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 04:40:37,283 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 04:40:37,290 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__wzichhu 2026-03-11 04:40:37,316 Soop found: SOOP 2026-03-11 04:40:37,411 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/17/CAL/solo_CAL_stix-cal-energy_20250517T122554-20250517T144953_V02.fits 2026-03-11 04:40:37,564 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e0nzmcs4 2026-03-11 04:40:37,565 Read config from in: /tmp/ecc_context_ecc_cfg_1_e0nzmcs4/post_ecc.ini 2026-03-11 04:40:38,806 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e0nzmcs4/solo_L1_stix-cal-energy_20250531_V03_ecc_in.fits 2026-03-11 04:50:19,958 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250531_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250531_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250531_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250531_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 04:50:26,254 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 04:50:26,261 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e0nzmcs4 2026-03-11 04:50:26,287 Soop found: SOOP 2026-03-11 04:50:26,384 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/31/CAL/solo_CAL_stix-cal-energy_20250531T073726-20250531T100126_V02.fits 2026-03-11 04:50:26,546 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pdrbrg4l 2026-03-11 04:50:26,547 Read config from in: /tmp/ecc_context_ecc_cfg_1_pdrbrg4l/post_ecc.ini 2026-03-11 04:50:27,795 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pdrbrg4l/solo_L1_stix-cal-energy_20250518_V03_ecc_in.fits 2026-03-11 04:59:56,290 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250518_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250518_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250518_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250518_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 05:00:02,571 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 05:00:02,577 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pdrbrg4l 2026-03-11 05:00:02,604 Soop found: SOOP 2026-03-11 05:00:02,700 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/18/CAL/solo_CAL_stix-cal-energy_20250518T122600-20250518T133524_V02.fits 2026-03-11 05:00:02,856 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pph0mpef 2026-03-11 05:00:02,857 Read config from in: /tmp/ecc_context_ecc_cfg_1_pph0mpef/post_ecc.ini 2026-03-11 05:00:04,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pph0mpef/solo_L1_stix-cal-energy_20250523_V03_ecc_in.fits 2026-03-11 05:09:59,182 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250523_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250523_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250523_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250523_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 05:10:06,748 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 05:10:06,754 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pph0mpef 2026-03-11 05:10:06,779 Soop found: SOOP 2026-03-11 05:10:06,875 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/23/CAL/solo_CAL_stix-cal-energy_20250523T014122-20250523T040529_V02.fits 2026-03-11 05:10:07,032 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tn10lr0s 2026-03-11 05:10:07,032 Read config from in: /tmp/ecc_context_ecc_cfg_1_tn10lr0s/post_ecc.ini 2026-03-11 05:10:08,267 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tn10lr0s/solo_L1_stix-cal-energy_20250516_V03_ecc_in.fits 2026-03-11 05:19:57,719 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250516_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250516_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250516_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250516_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 05:20:04,021 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 05:20:04,029 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tn10lr0s 2026-03-11 05:20:04,054 Soop found: SOOP 2026-03-11 05:20:04,152 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/16/CAL/solo_CAL_stix-cal-energy_20250516T112741-20250516T135142_V02.fits 2026-03-11 05:20:04,310 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__s2l6g3_ 2026-03-11 05:20:04,310 Read config from in: /tmp/ecc_context_ecc_cfg_1__s2l6g3_/post_ecc.ini 2026-03-11 05:20:05,563 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__s2l6g3_/solo_L1_stix-cal-energy_20250521_V03_ecc_in.fits 2026-03-11 05:30:07,950 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250521_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250521_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250521_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250521_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 05:30:14,186 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 05:30:14,193 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__s2l6g3_ 2026-03-11 05:30:14,219 Soop found: SOOP 2026-03-11 05:30:14,316 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/21/CAL/solo_CAL_stix-cal-energy_20250521T012121-20250521T034642_V02.fits 2026-03-11 05:30:14,471 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f5puw2fn 2026-03-11 05:30:14,472 Read config from in: /tmp/ecc_context_ecc_cfg_1_f5puw2fn/post_ecc.ini 2026-03-11 05:30:15,718 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f5puw2fn/solo_L1_stix-cal-energy_20250512_V03_ecc_in.fits 2026-03-11 05:40:19,604 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250512_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250512_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250512_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250512_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 05:40:25,866 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 05:40:25,873 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f5puw2fn 2026-03-11 05:40:25,899 Soop found: SOOP 2026-03-11 05:40:25,995 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/12/CAL/solo_CAL_stix-cal-energy_20250512T093508-20250512T115907_V02.fits 2026-03-11 05:40:26,151 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_37vfbirf 2026-03-11 05:40:26,152 Read config from in: /tmp/ecc_context_ecc_cfg_1_37vfbirf/post_ecc.ini 2026-03-11 05:40:27,395 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_37vfbirf/solo_L1_stix-cal-energy_20250527_V03_ecc_in.fits 2026-03-11 05:49:56,070 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250527_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250527_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250527_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250527_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 05:50:02,299 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 05:50:02,306 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_37vfbirf 2026-03-11 05:50:02,336 Soop found: SOOP 2026-03-11 05:50:02,434 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/27/CAL/solo_CAL_stix-cal-energy_20250527T042400-20250527T064800_V02.fits 2026-03-11 05:50:02,593 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_32ljiiru 2026-03-11 05:50:02,594 Read config from in: /tmp/ecc_context_ecc_cfg_1_32ljiiru/post_ecc.ini 2026-03-11 05:50:03,833 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_32ljiiru/solo_L1_stix-cal-energy_20250511_V03_ecc_in.fits 2026-03-11 05:59:59,887 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250511_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250511_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250511_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250511_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 06:00:06,177 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 06:00:06,184 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_32ljiiru 2026-03-11 06:00:06,210 Soop found: SOOP 2026-03-11 06:00:06,210 Soop found: SOOP 2026-03-11 06:00:06,306 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/11/CAL/solo_CAL_stix-cal-energy_20250511T044749-20250511T073010_V02.fits 2026-03-11 06:00:06,466 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tmf0ry53 2026-03-11 06:00:06,466 Read config from in: /tmp/ecc_context_ecc_cfg_1_tmf0ry53/post_ecc.ini 2026-03-11 06:00:09,077 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tmf0ry53/solo_L1_stix-cal-energy_20250526_V03_ecc_in.fits 2026-03-11 06:10:10,431 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250526_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250526_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250526_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250526_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 06:10:16,667 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 06:10:16,673 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tmf0ry53 2026-03-11 06:10:16,699 Soop found: SOOP 2026-03-11 06:10:16,699 Soop found: SOOP 2026-03-11 06:10:16,699 Soop found: SOOP 2026-03-11 06:10:16,795 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/26/CAL/solo_CAL_stix-cal-energy_20250526T042354-20250526T064754_V02.fits 2026-03-11 06:10:16,948 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_actw2665 2026-03-11 06:10:16,948 Read config from in: /tmp/ecc_context_ecc_cfg_1_actw2665/post_ecc.ini 2026-03-11 06:10:18,175 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_actw2665/solo_L1_stix-cal-energy_20250519_V03_ecc_in.fits 2026-03-11 06:20:03,632 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250519_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250519_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250519_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250519_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 06:20:09,875 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 06:20:09,883 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_actw2665 2026-03-11 06:20:09,908 Soop found: SOOP 2026-03-11 06:20:10,008 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/19/CAL/solo_CAL_stix-cal-energy_20250519T002201-20250519T024600_V02.fits 2026-03-11 06:20:10,165 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dv40yhuf 2026-03-11 06:20:10,165 Read config from in: /tmp/ecc_context_ecc_cfg_1_dv40yhuf/post_ecc.ini 2026-03-11 06:20:11,398 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dv40yhuf/solo_L1_stix-cal-energy_20250522_V03_ecc_in.fits 2026-03-11 06:30:09,456 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250522_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250522_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250522_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250522_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 06:30:15,646 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 06:30:15,653 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dv40yhuf 2026-03-11 06:30:15,678 Soop found: SOOP 2026-03-11 06:30:15,776 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/22/CAL/solo_CAL_stix-cal-energy_20250522T014115-20250522T040515_V02.fits 2026-03-11 06:30:15,932 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xgfo6k5r 2026-03-11 06:30:15,933 Read config from in: /tmp/ecc_context_ecc_cfg_1_xgfo6k5r/post_ecc.ini 2026-03-11 06:30:17,178 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xgfo6k5r/solo_L1_stix-cal-energy_20250525_V03_ecc_in.fits 2026-03-11 06:40:05,711 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250525_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250525_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250525_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250525_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 06:40:12,288 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 06:40:12,295 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xgfo6k5r 2026-03-11 06:40:12,322 Soop found: SOOP 2026-03-11 06:40:12,421 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/25/CAL/solo_CAL_stix-cal-energy_20250525T020805-20250525T043432_V02.fits 2026-03-11 06:40:12,582 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h4a8ctax 2026-03-11 06:40:12,583 Read config from in: /tmp/ecc_context_ecc_cfg_1_h4a8ctax/post_ecc.ini 2026-03-11 06:40:13,834 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h4a8ctax/solo_L1_stix-cal-energy_20250528_V03_ecc_in.fits 2026-03-11 06:49:53,463 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250528_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250528_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250528_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250528_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 06:49:59,665 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 06:49:59,672 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h4a8ctax 2026-03-11 06:49:59,699 Soop found: SOOP 2026-03-11 06:49:59,796 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/28/CAL/solo_CAL_stix-cal-energy_20250528T042406-20250528T064914_V02.fits 2026-03-11 06:49:59,954 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ujmyii8o 2026-03-11 06:49:59,955 Read config from in: /tmp/ecc_context_ecc_cfg_1_ujmyii8o/post_ecc.ini 2026-03-11 06:50:01,200 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ujmyii8o/solo_L1_stix-cal-energy_20250509_V03_ecc_in.fits 2026-03-11 07:00:24,601 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250509_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250509_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250509_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250509_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 07:00:32,313 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 07:00:32,320 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ujmyii8o 2026-03-11 07:00:32,345 Soop found: SOOP 2026-03-11 07:00:32,444 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/09/CAL/solo_CAL_stix-cal-energy_20250509T044736-20250509T071136_V02.fits 2026-03-11 07:00:32,599 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sv_2qt0t 2026-03-11 07:00:32,600 Read config from in: /tmp/ecc_context_ecc_cfg_1_sv_2qt0t/post_ecc.ini 2026-03-11 07:00:33,833 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sv_2qt0t/solo_L1_stix-cal-energy_20250529_V03_ecc_in.fits 2026-03-11 07:10:37,752 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250529_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250529_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250529_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250529_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 07:10:43,909 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 07:10:43,915 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sv_2qt0t 2026-03-11 07:10:43,938 Soop found: SOOP 2026-03-11 07:10:44,033 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/29/CAL/solo_CAL_stix-cal-energy_20250529T063435-20250529T085835_V02.fits 2026-03-11 07:10:44,187 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ok8gc0s_ 2026-03-11 07:10:44,187 Read config from in: /tmp/ecc_context_ecc_cfg_1_ok8gc0s_/post_ecc.ini 2026-03-11 07:10:45,426 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ok8gc0s_/solo_L1_stix-cal-energy_20250502_V03_ecc_in.fits 2026-03-11 07:20:46,468 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250502_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250502_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250502_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250502_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 07:20:52,668 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 07:20:52,676 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ok8gc0s_ 2026-03-11 07:20:52,701 Soop found: SOOP 2026-03-11 07:20:52,797 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/02/CAL/solo_CAL_stix-cal-energy_20250502T000310-20250502T022721_V02.fits 2026-03-11 07:20:52,951 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hh3xmm0c 2026-03-11 07:20:52,951 Read config from in: /tmp/ecc_context_ecc_cfg_1_hh3xmm0c/post_ecc.ini 2026-03-11 07:20:54,189 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hh3xmm0c/solo_L1_stix-cal-energy_20250513_V03_ecc_in.fits 2026-03-11 07:30:51,676 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250513_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250513_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250513_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250513_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 07:30:57,885 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 07:30:57,892 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hh3xmm0c 2026-03-11 07:30:57,917 Soop found: SOOP 2026-03-11 07:30:58,013 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/13/CAL/solo_CAL_stix-cal-energy_20250513T093514-20250513T115914_V02.fits 2026-03-11 07:30:58,167 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hc4adz_a 2026-03-11 07:30:58,167 Read config from in: /tmp/ecc_context_ecc_cfg_1_hc4adz_a/post_ecc.ini 2026-03-11 07:30:59,431 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hc4adz_a/solo_L1_stix-cal-energy_20250515_V03_ecc_in.fits 2026-03-11 07:40:44,208 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250515_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250515_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250515_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250515_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 07:40:50,504 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 07:40:50,511 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hc4adz_a 2026-03-11 07:40:50,538 Soop found: SOOP 2026-03-11 07:40:50,636 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/15/CAL/solo_CAL_stix-cal-energy_20250515T112729-20250515T135128_V02.fits 2026-03-11 07:40:50,792 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dmq98pr6 2026-03-11 07:40:50,792 Read config from in: /tmp/ecc_context_ecc_cfg_1_dmq98pr6/post_ecc.ini 2026-03-11 07:40:52,047 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dmq98pr6/solo_L1_stix-cal-energy_20250504_V03_ecc_in.fits 2026-03-11 07:50:42,778 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250504_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250504_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250504_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250504_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 07:50:48,985 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 07:50:48,995 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dmq98pr6 2026-03-11 07:50:49,021 Soop found: SOOP 2026-03-11 07:50:49,118 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/04/CAL/solo_CAL_stix-cal-energy_20250504T000527-20250504T023653_V02.fits 2026-03-11 07:50:49,277 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q7sldyzu 2026-03-11 07:50:49,278 Read config from in: /tmp/ecc_context_ecc_cfg_1_q7sldyzu/post_ecc.ini 2026-03-11 07:50:50,519 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q7sldyzu/solo_L1_stix-cal-energy_20250730_V03_ecc_in.fits 2026-03-11 08:00:12,361 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250730_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250730_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250730_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250730_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 08:00:20,270 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 08:00:20,277 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q7sldyzu 2026-03-11 08:00:20,301 Soop found: SOOP 2026-03-11 08:00:20,395 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/30/CAL/solo_CAL_stix-cal-energy_20250730T024709-20250730T051108_V02.fits 2026-03-11 08:00:20,549 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iio829lw 2026-03-11 08:00:20,550 Read config from in: /tmp/ecc_context_ecc_cfg_1_iio829lw/post_ecc.ini 2026-03-11 08:00:21,788 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iio829lw/solo_L1_stix-cal-energy_20250710_V03_ecc_in.fits 2026-03-11 08:09:34,760 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250710_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250710_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250710_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250710_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 08:09:41,003 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 08:09:41,010 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_iio829lw 2026-03-11 08:09:41,036 Soop found: SOOP 2026-03-11 08:09:41,135 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/10/CAL/solo_CAL_stix-cal-energy_20250710T020641-20250710T043040_V02.fits 2026-03-11 08:09:41,299 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_50txou9p 2026-03-11 08:09:41,299 Read config from in: /tmp/ecc_context_ecc_cfg_1_50txou9p/post_ecc.ini 2026-03-11 08:09:42,531 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_50txou9p/solo_L1_stix-cal-energy_20250701_V03_ecc_in.fits 2026-03-11 08:19:16,157 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250701_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250701_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250701_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250701_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 08:19:22,344 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 08:19:22,351 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_50txou9p 2026-03-11 08:19:22,377 Soop found: SOOP 2026-03-11 08:19:22,473 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/01/CAL/solo_CAL_stix-cal-energy_20250701T013316-20250701T035715_V02.fits 2026-03-11 08:19:22,631 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cn984wlc 2026-03-11 08:19:22,632 Read config from in: /tmp/ecc_context_ecc_cfg_1_cn984wlc/post_ecc.ini 2026-03-11 08:19:23,869 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cn984wlc/solo_L1_stix-cal-energy_20250724_V03_ecc_in.fits 2026-03-11 08:29:17,346 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250724_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250724_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250724_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250724_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 08:29:23,562 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 08:29:23,569 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cn984wlc 2026-03-11 08:29:23,594 Soop found: SOOP 2026-03-11 08:29:23,691 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/24/CAL/solo_CAL_stix-cal-energy_20250724T010135-20250724T032535_V02.fits 2026-03-11 08:29:23,847 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ay3569p0 2026-03-11 08:29:23,848 Read config from in: /tmp/ecc_context_ecc_cfg_1_ay3569p0/post_ecc.ini 2026-03-11 08:29:25,097 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ay3569p0/solo_L1_stix-cal-energy_20250708_V03_ecc_in.fits 2026-03-11 08:38:51,223 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250708_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250708_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250708_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250708_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 08:38:57,584 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 08:38:57,591 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ay3569p0 2026-03-11 08:38:57,619 Soop found: SOOP 2026-03-11 08:38:57,716 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/08/CAL/solo_CAL_stix-cal-energy_20250708T020629-20250708T043028_V02.fits 2026-03-11 08:38:57,874 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_15hzxsgx 2026-03-11 08:38:57,875 Read config from in: /tmp/ecc_context_ecc_cfg_1_15hzxsgx/post_ecc.ini 2026-03-11 08:38:59,129 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_15hzxsgx/solo_L1_stix-cal-energy_20250705_V03_ecc_in.fits 2026-03-11 08:48:25,961 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250705_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250705_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250705_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250705_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 08:48:32,192 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 08:48:32,200 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_15hzxsgx 2026-03-11 08:48:32,227 Soop found: SOOP 2026-03-11 08:48:32,324 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/05/CAL/solo_CAL_stix-cal-energy_20250705T013338-20250705T035738_V02.fits 2026-03-11 08:48:32,481 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ba8ftnpu 2026-03-11 08:48:32,482 Read config from in: /tmp/ecc_context_ecc_cfg_1_ba8ftnpu/post_ecc.ini 2026-03-11 08:48:35,079 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ba8ftnpu/solo_L1_stix-cal-energy_20250714_V03_ecc_in.fits 2026-03-11 08:58:16,280 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250714_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250714_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250714_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250714_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 08:58:22,565 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 08:58:22,579 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ba8ftnpu 2026-03-11 08:58:22,613 Soop found: SOOP 2026-03-11 08:58:22,714 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/14/CAL/solo_CAL_stix-cal-energy_20250714T025802-20250714T052202_V02.fits 2026-03-11 08:58:22,873 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o67q6o4y 2026-03-11 08:58:22,873 Read config from in: /tmp/ecc_context_ecc_cfg_1_o67q6o4y/post_ecc.ini 2026-03-11 08:58:24,132 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o67q6o4y/solo_L1_stix-cal-energy_20250707_V03_ecc_in.fits 2026-03-11 09:07:56,226 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250707_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250707_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250707_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250707_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 09:08:02,436 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 09:08:02,442 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o67q6o4y 2026-03-11 09:08:02,468 Soop found: SOOP 2026-03-11 09:08:02,564 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/07/CAL/solo_CAL_stix-cal-energy_20250707T020623-20250707T043023_V02.fits 2026-03-11 09:08:02,717 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uxlkoqq4 2026-03-11 09:08:02,718 Read config from in: /tmp/ecc_context_ecc_cfg_1_uxlkoqq4/post_ecc.ini 2026-03-11 09:08:03,955 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uxlkoqq4/solo_L1_stix-cal-energy_20250720_V03_ecc_in.fits 2026-03-11 09:17:56,533 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250720_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250720_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250720_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250720_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 09:18:03,561 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 09:18:03,568 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uxlkoqq4 2026-03-11 09:18:03,601 Soop found: SOOP 2026-03-11 09:18:03,707 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/20/CAL/solo_CAL_stix-cal-energy_20250720T032337-20250720T052715_V02.fits 2026-03-11 09:18:03,871 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_epqzszpj 2026-03-11 09:18:03,872 Read config from in: /tmp/ecc_context_ecc_cfg_1_epqzszpj/post_ecc.ini 2026-03-11 09:18:05,226 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_epqzszpj/solo_L1_stix-cal-energy_20250706_V03_ecc_in.fits 2026-03-11 09:27:29,590 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250706_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250706_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250706_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250706_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 09:27:35,947 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 09:27:35,954 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_epqzszpj 2026-03-11 09:27:35,986 Soop found: SOOP 2026-03-11 09:27:36,087 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/06/CAL/solo_CAL_stix-cal-energy_20250706T013345-20250706T035820_V02.fits 2026-03-11 09:27:36,251 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6hifxtgp 2026-03-11 09:27:36,251 Read config from in: /tmp/ecc_context_ecc_cfg_1_6hifxtgp/post_ecc.ini 2026-03-11 09:27:37,514 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6hifxtgp/solo_L1_stix-cal-energy_20250703_V03_ecc_in.fits 2026-03-11 09:36:47,206 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250703_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250703_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250703_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250703_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 09:36:53,550 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 09:36:53,560 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6hifxtgp 2026-03-11 09:36:53,597 Soop found: SOOP 2026-03-11 09:36:53,699 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/03/CAL/solo_CAL_stix-cal-energy_20250703T013327-20250703T035726_V02.fits 2026-03-11 09:36:53,866 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1gsnh77o 2026-03-11 09:36:53,867 Read config from in: /tmp/ecc_context_ecc_cfg_1_1gsnh77o/post_ecc.ini 2026-03-11 09:36:55,119 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1gsnh77o/solo_L1_stix-cal-energy_20250717_V03_ecc_in.fits 2026-03-11 09:46:47,711 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250717_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250717_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250717_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250717_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 09:46:55,603 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 09:46:55,609 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1gsnh77o 2026-03-11 09:46:55,635 Soop found: SOOP 2026-03-11 09:46:55,730 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/17/CAL/solo_CAL_stix-cal-energy_20250717T032319-20250717T054718_V02.fits 2026-03-11 09:46:55,887 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_695dyvm3 2026-03-11 09:46:55,887 Read config from in: /tmp/ecc_context_ecc_cfg_1_695dyvm3/post_ecc.ini 2026-03-11 09:46:57,118 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_695dyvm3/solo_L1_stix-cal-energy_20250731_V03_ecc_in.fits 2026-03-11 09:56:33,047 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250731_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250731_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250731_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250731_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 09:56:39,269 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 09:56:39,277 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_695dyvm3 2026-03-11 09:56:39,303 Soop found: SOOP 2026-03-11 09:56:39,399 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/31/CAL/solo_CAL_stix-cal-energy_20250731T024716-20250731T051115_V02.fits 2026-03-11 09:56:39,563 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r4xnoj2j 2026-03-11 09:56:39,564 Read config from in: /tmp/ecc_context_ecc_cfg_1_r4xnoj2j/post_ecc.ini 2026-03-11 09:56:40,820 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r4xnoj2j/solo_L1_stix-cal-energy_20250718_V03_ecc_in.fits 2026-03-11 10:06:23,247 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250718_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250718_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250718_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250718_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 10:06:29,463 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 10:06:29,470 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r4xnoj2j 2026-03-11 10:06:29,496 Soop found: SOOP 2026-03-11 10:06:29,595 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/18/CAL/solo_CAL_stix-cal-energy_20250718T032324-20250718T054724_V02.fits 2026-03-11 10:06:29,747 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sa562tq2 2026-03-11 10:06:29,748 Read config from in: /tmp/ecc_context_ecc_cfg_1_sa562tq2/post_ecc.ini 2026-03-11 10:06:30,979 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sa562tq2/solo_L1_stix-cal-energy_20250723_V03_ecc_in.fits 2026-03-11 10:16:05,665 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250723_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250723_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250723_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250723_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 10:16:11,925 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 10:16:11,933 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sa562tq2 2026-03-11 10:16:11,960 Soop found: SOOP 2026-03-11 10:16:12,056 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/23/CAL/solo_CAL_stix-cal-energy_20250723T002546-20250723T025300_V02.fits 2026-03-11 10:16:12,227 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zw8gnujt 2026-03-11 10:16:12,227 Read config from in: /tmp/ecc_context_ecc_cfg_1_zw8gnujt/post_ecc.ini 2026-03-11 10:16:13,458 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zw8gnujt/solo_L1_stix-cal-energy_20250716_V03_ecc_in.fits 2026-03-11 10:25:47,602 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250716_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250716_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250716_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250716_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 10:25:54,615 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 10:25:54,624 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zw8gnujt 2026-03-11 10:25:54,656 Soop found: SOOP 2026-03-11 10:25:54,758 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/16/CAL/solo_CAL_stix-cal-energy_20250716T025818-20250716T052227_V02.fits 2026-03-11 10:25:54,926 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_99y8afq6 2026-03-11 10:25:54,926 Read config from in: /tmp/ecc_context_ecc_cfg_1_99y8afq6/post_ecc.ini 2026-03-11 10:25:56,214 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_99y8afq6/solo_L1_stix-cal-energy_20250721_V03_ecc_in.fits 2026-03-11 10:35:38,306 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250721_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250721_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250721_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250721_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 10:35:44,503 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 10:35:44,512 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_99y8afq6 2026-03-11 10:35:44,537 Soop found: SOOP 2026-03-11 10:35:44,631 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/21/CAL/solo_CAL_stix-cal-energy_20250721T002312-20250721T024711_V02.fits 2026-03-11 10:35:44,786 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ecsdi1g9 2026-03-11 10:35:44,787 Read config from in: /tmp/ecc_context_ecc_cfg_1_ecsdi1g9/post_ecc.ini 2026-03-11 10:35:46,035 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ecsdi1g9/solo_L1_stix-cal-energy_20250712_V03_ecc_in.fits 2026-03-11 10:45:13,686 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250712_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250712_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250712_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250712_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 10:45:21,267 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 10:45:21,274 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ecsdi1g9 2026-03-11 10:45:21,299 Soop found: SOOP 2026-03-11 10:45:21,397 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/12/CAL/solo_CAL_stix-cal-energy_20250712T020654-20250712T043054_V02.fits 2026-03-11 10:45:21,551 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p7m8htjk 2026-03-11 10:45:21,551 Read config from in: /tmp/ecc_context_ecc_cfg_1_p7m8htjk/post_ecc.ini 2026-03-11 10:45:22,778 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p7m8htjk/solo_L1_stix-cal-energy_20250727_V03_ecc_in.fits 2026-03-11 10:54:56,329 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250727_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250727_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250727_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250727_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 10:55:02,519 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 10:55:02,525 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p7m8htjk 2026-03-11 10:55:02,550 Soop found: SOOP 2026-03-11 10:55:02,645 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/27/CAL/solo_CAL_stix-cal-energy_20250727T010531-20250727T033011_V02.fits 2026-03-11 10:55:02,952 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tztmtk0e 2026-03-11 10:55:02,952 Read config from in: /tmp/ecc_context_ecc_cfg_1_tztmtk0e/post_ecc.ini 2026-03-11 10:55:04,197 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tztmtk0e/solo_L1_stix-cal-energy_20250711_V03_ecc_in.fits 2026-03-11 11:04:34,948 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250711_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250711_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250711_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250711_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 11:04:41,222 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 11:04:41,230 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tztmtk0e 2026-03-11 11:04:41,257 Soop found: SOOP 2026-03-11 11:04:41,359 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/11/CAL/solo_CAL_stix-cal-energy_20250711T020646-20250711T043046_V02.fits 2026-03-11 11:04:41,515 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8hrf8eca 2026-03-11 11:04:41,516 Read config from in: /tmp/ecc_context_ecc_cfg_1_8hrf8eca/post_ecc.ini 2026-03-11 11:04:42,754 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8hrf8eca/solo_L1_stix-cal-energy_20250726_V03_ecc_in.fits 2026-03-11 11:14:08,092 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250726_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250726_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250726_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250726_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 11:14:15,009 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 11:14:15,018 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8hrf8eca 2026-03-11 11:14:15,049 Soop found: SOOP 2026-03-11 11:14:15,152 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/26/CAL/solo_CAL_stix-cal-energy_20250726T010525-20250726T032924_V02.fits 2026-03-11 11:14:15,323 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_07kmo55u 2026-03-11 11:14:15,324 Read config from in: /tmp/ecc_context_ecc_cfg_1_07kmo55u/post_ecc.ini 2026-03-11 11:14:16,590 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_07kmo55u/solo_L1_stix-cal-energy_20250719_V03_ecc_in.fits 2026-03-11 11:24:03,141 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250719_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250719_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250719_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250719_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 11:24:09,378 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 11:24:09,385 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_07kmo55u 2026-03-11 11:24:09,411 Soop found: SOOP 2026-03-11 11:24:09,505 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/19/CAL/solo_CAL_stix-cal-energy_20250719T032331-20250719T054731_V02.fits 2026-03-11 11:24:09,659 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pfe37tks 2026-03-11 11:24:09,659 Read config from in: /tmp/ecc_context_ecc_cfg_1_pfe37tks/post_ecc.ini 2026-03-11 11:24:10,895 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pfe37tks/solo_L1_stix-cal-energy_20250722_V03_ecc_in.fits 2026-03-11 11:33:47,774 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250722_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250722_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250722_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250722_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 11:33:54,050 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 11:33:54,059 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pfe37tks 2026-03-11 11:33:54,085 Soop found: SOOP 2026-03-11 11:33:54,179 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/22/CAL/solo_CAL_stix-cal-energy_20250722T002317-20250722T024731_V02.fits 2026-03-11 11:33:54,333 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kggdygbc 2026-03-11 11:33:54,334 Read config from in: /tmp/ecc_context_ecc_cfg_1_kggdygbc/post_ecc.ini 2026-03-11 11:33:56,950 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kggdygbc/solo_L1_stix-cal-energy_20250725_V03_ecc_in.fits 2026-03-11 11:43:29,326 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250725_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250725_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250725_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250725_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 11:43:35,509 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 11:43:35,516 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kggdygbc 2026-03-11 11:43:35,541 Soop found: SOOP 2026-03-11 11:43:35,636 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/25/CAL/solo_CAL_stix-cal-energy_20250725T010142-20250725T032543_V02.fits 2026-03-11 11:43:35,813 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jd592z0t 2026-03-11 11:43:35,813 Read config from in: /tmp/ecc_context_ecc_cfg_1_jd592z0t/post_ecc.ini 2026-03-11 11:43:37,052 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jd592z0t/solo_L1_stix-cal-energy_20250728_V03_ecc_in.fits 2026-03-11 11:53:07,737 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250728_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250728_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250728_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250728_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 11:53:13,941 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 11:53:13,949 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jd592z0t 2026-03-11 11:53:13,975 Soop found: SOOP 2026-03-11 11:53:14,077 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/28/CAL/solo_CAL_stix-cal-energy_20250728T022424-20250728T044823_V02.fits 2026-03-11 11:53:14,236 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2y43x55g 2026-03-11 11:53:14,237 Read config from in: /tmp/ecc_context_ecc_cfg_1_2y43x55g/post_ecc.ini 2026-03-11 11:53:15,474 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2y43x55g/solo_L1_stix-cal-energy_20250709_V03_ecc_in.fits 2026-03-11 12:02:55,245 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250709_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250709_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250709_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250709_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 12:03:01,443 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 12:03:01,450 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2y43x55g 2026-03-11 12:03:01,475 Soop found: SOOP 2026-03-11 12:03:01,572 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/09/CAL/solo_CAL_stix-cal-energy_20250709T020635-20250709T043035_V02.fits 2026-03-11 12:03:01,729 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1t5stpxd 2026-03-11 12:03:01,729 Read config from in: /tmp/ecc_context_ecc_cfg_1_1t5stpxd/post_ecc.ini 2026-03-11 12:03:02,972 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1t5stpxd/solo_L1_stix-cal-energy_20250729_V03_ecc_in.fits 2026-03-11 12:12:40,382 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250729_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250729_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250729_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250729_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 12:12:46,747 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 12:12:46,754 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1t5stpxd 2026-03-11 12:12:46,780 Soop found: SOOP 2026-03-11 12:12:46,875 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/29/CAL/solo_CAL_stix-cal-energy_20250729T022430-20250729T044904_V02.fits 2026-03-11 12:12:47,034 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sr7kjl57 2026-03-11 12:12:47,034 Read config from in: /tmp/ecc_context_ecc_cfg_1_sr7kjl57/post_ecc.ini 2026-03-11 12:12:48,302 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sr7kjl57/solo_L1_stix-cal-energy_20250702_V03_ecc_in.fits 2026-03-11 12:22:19,600 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250702_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250702_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250702_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250702_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 12:22:25,869 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 12:22:25,877 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sr7kjl57 2026-03-11 12:22:25,907 Soop found: SOOP 2026-03-11 12:22:26,008 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/02/CAL/solo_CAL_stix-cal-energy_20250702T013321-20250702T035721_V02.fits 2026-03-11 12:22:26,166 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_813_zuvy 2026-03-11 12:22:26,167 Read config from in: /tmp/ecc_context_ecc_cfg_1_813_zuvy/post_ecc.ini 2026-03-11 12:22:27,419 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_813_zuvy/solo_L1_stix-cal-energy_20250713_V03_ecc_in.fits 2026-03-11 12:32:09,003 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250713_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250713_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250713_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250713_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 12:32:17,010 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 12:32:17,021 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_813_zuvy 2026-03-11 12:32:17,050 Soop found: SOOP 2026-03-11 12:32:17,148 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/13/CAL/solo_CAL_stix-cal-energy_20250713T020700-20250713T043358_V02.fits 2026-03-11 12:32:17,312 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5amcghdh 2026-03-11 12:32:17,313 Read config from in: /tmp/ecc_context_ecc_cfg_1_5amcghdh/post_ecc.ini 2026-03-11 12:32:18,552 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5amcghdh/solo_L1_stix-cal-energy_20250715_V03_ecc_in.fits 2026-03-11 12:41:42,839 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250715_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250715_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250715_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250715_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 12:41:49,140 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 12:41:49,148 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5amcghdh 2026-03-11 12:41:49,176 Soop found: SOOP 2026-03-11 12:41:49,271 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/15/CAL/solo_CAL_stix-cal-energy_20250715T025809-20250715T052209_V02.fits 2026-03-11 12:41:49,430 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0ibpml_6 2026-03-11 12:41:49,430 Read config from in: /tmp/ecc_context_ecc_cfg_1_0ibpml_6/post_ecc.ini 2026-03-11 12:41:50,663 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0ibpml_6/solo_L1_stix-cal-energy_20250704_V03_ecc_in.fits 2026-03-11 12:51:08,662 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250704_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250704_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250704_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250704_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 12:51:14,877 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 12:51:14,884 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0ibpml_6 2026-03-11 12:51:14,910 Soop found: SOOP 2026-03-11 12:51:15,008 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/04/CAL/solo_CAL_stix-cal-energy_20250704T013333-20250704T035732_V02.fits 2026-03-11 12:51:15,165 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_119w45nm 2026-03-11 12:51:15,166 Read config from in: /tmp/ecc_context_ecc_cfg_1_119w45nm/post_ecc.ini 2026-03-11 12:51:16,404 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_119w45nm/solo_L1_stix-cal-energy_20250630_V03_ecc_in.fits 2026-03-11 13:00:36,164 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250630_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250630_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250630_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250630_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 13:00:42,405 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 13:00:42,412 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_119w45nm 2026-03-11 13:00:42,439 Soop found: SOOP 2026-03-11 13:00:42,536 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/30/CAL/solo_CAL_stix-cal-energy_20250630T013307-20250630T035707_V02.fits 2026-03-11 13:00:42,694 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_919tcxf6 2026-03-11 13:00:42,694 Read config from in: /tmp/ecc_context_ecc_cfg_1_919tcxf6/post_ecc.ini 2026-03-11 13:00:43,943 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_919tcxf6/solo_L1_stix-cal-energy_20250610_V03_ecc_in.fits 2026-03-11 13:10:27,547 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250610_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250610_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250610_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250610_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 13:10:33,850 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 13:10:33,857 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_919tcxf6 2026-03-11 13:10:33,883 Soop found: SOOP 2026-03-11 13:10:33,978 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/10/CAL/solo_CAL_stix-cal-energy_20250610T000624-20250610T023041_V02.fits 2026-03-11 13:10:34,135 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h7je8q7p 2026-03-11 13:10:34,135 Read config from in: /tmp/ecc_context_ecc_cfg_1_h7je8q7p/post_ecc.ini 2026-03-11 13:10:35,375 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h7je8q7p/solo_L1_stix-cal-energy_20250601_V03_ecc_in.fits 2026-03-11 13:20:04,641 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250601_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250601_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250601_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250601_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 13:20:10,900 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 13:20:10,907 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h7je8q7p 2026-03-11 13:20:10,934 Soop found: SOOP 2026-03-11 13:20:11,030 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/01/CAL/solo_CAL_stix-cal-energy_20250601T073732-20250601T100133_V02.fits 2026-03-11 13:20:11,181 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zahoen_p 2026-03-11 13:20:11,181 Read config from in: /tmp/ecc_context_ecc_cfg_1_zahoen_p/post_ecc.ini 2026-03-11 13:20:12,430 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zahoen_p/solo_L1_stix-cal-energy_20250624_V03_ecc_in.fits 2026-03-11 13:29:50,743 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250624_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250624_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250624_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250624_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 13:29:58,335 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 13:29:58,343 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zahoen_p 2026-03-11 13:29:58,368 Soop found: SOOP 2026-03-11 13:29:58,466 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/24/CAL/solo_CAL_stix-cal-energy_20250624T010128-20250624T032540_V02.fits 2026-03-11 13:29:58,623 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7617kjfc 2026-03-11 13:29:58,624 Read config from in: /tmp/ecc_context_ecc_cfg_1_7617kjfc/post_ecc.ini 2026-03-11 13:29:59,868 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7617kjfc/solo_L1_stix-cal-energy_20250608_V03_ecc_in.fits 2026-03-11 13:39:39,573 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250608_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250608_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250608_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250608_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 13:39:45,784 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 13:39:45,790 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7617kjfc 2026-03-11 13:39:45,815 Soop found: SOOP 2026-03-11 13:39:45,913 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/08/CAL/solo_CAL_stix-cal-energy_20250608T080435-20250608T094007_V02.fits 2026-03-11 13:39:46,068 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_906jy10z 2026-03-11 13:39:46,068 Read config from in: /tmp/ecc_context_ecc_cfg_1_906jy10z/post_ecc.ini 2026-03-11 13:39:47,301 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_906jy10z/solo_L1_stix-cal-energy_20250605_V03_ecc_in.fits 2026-03-11 13:49:12,945 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250605_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250605_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250605_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250605_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 13:49:19,204 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 13:49:19,211 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_906jy10z 2026-03-11 13:49:19,236 Soop found: SOOP 2026-03-11 13:49:19,330 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/05/CAL/solo_CAL_stix-cal-energy_20250605T080417-20250605T102817_V02.fits 2026-03-11 13:49:19,489 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0o6qvj6s 2026-03-11 13:49:19,489 Read config from in: /tmp/ecc_context_ecc_cfg_1_0o6qvj6s/post_ecc.ini 2026-03-11 13:49:20,722 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0o6qvj6s/solo_L1_stix-cal-energy_20250614_V03_ecc_in.fits 2026-03-11 13:58:57,937 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250614_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250614_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250614_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250614_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 13:59:04,881 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 13:59:04,890 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0o6qvj6s 2026-03-11 13:59:04,919 Soop found: SOOP 2026-03-11 13:59:05,023 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/14/CAL/solo_CAL_stix-cal-energy_20250614T001159-20250614T023558_V02.fits 2026-03-11 13:59:05,196 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_eesb6i40 2026-03-11 13:59:05,197 Read config from in: /tmp/ecc_context_ecc_cfg_1_eesb6i40/post_ecc.ini 2026-03-11 13:59:06,465 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_eesb6i40/solo_L1_stix-cal-energy_20250607_V03_ecc_in.fits 2026-03-11 14:08:39,528 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250607_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250607_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250607_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250607_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 14:08:45,816 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 14:08:45,824 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_eesb6i40 2026-03-11 14:08:45,854 Soop found: SOOP 2026-03-11 14:08:45,955 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/07/CAL/solo_CAL_stix-cal-energy_20250607T080429-20250607T102828_V02.fits 2026-03-11 14:08:46,112 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c64ewepw 2026-03-11 14:08:46,112 Read config from in: /tmp/ecc_context_ecc_cfg_1_c64ewepw/post_ecc.ini 2026-03-11 14:08:47,366 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c64ewepw/solo_L1_stix-cal-energy_20250620_V03_ecc_in.fits 2026-03-11 14:18:07,235 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250620_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250620_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250620_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250620_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 14:18:13,428 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 14:18:13,436 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c64ewepw 2026-03-11 14:18:13,463 Soop found: SOOP 2026-03-11 14:18:13,559 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/20/CAL/solo_CAL_stix-cal-energy_20250620T002306-20250620T024708_V02.fits 2026-03-11 14:18:13,714 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__8hgjovy 2026-03-11 14:18:13,715 Read config from in: /tmp/ecc_context_ecc_cfg_1__8hgjovy/post_ecc.ini 2026-03-11 14:18:16,343 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__8hgjovy/solo_L1_stix-cal-energy_20250606_V03_ecc_in.fits 2026-03-11 14:27:47,883 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250606_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250606_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250606_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250606_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 14:27:54,193 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 14:27:54,201 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__8hgjovy 2026-03-11 14:27:54,226 Soop found: SOOP 2026-03-11 14:27:54,325 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/06/CAL/solo_CAL_stix-cal-energy_20250606T080423-20250606T102822_V02.fits 2026-03-11 14:27:54,483 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7s7uebaa 2026-03-11 14:27:54,484 Read config from in: /tmp/ecc_context_ecc_cfg_1_7s7uebaa/post_ecc.ini 2026-03-11 14:27:55,721 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7s7uebaa/solo_L1_stix-cal-energy_20250603_V03_ecc_in.fits 2026-03-11 14:37:35,149 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250603_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250603_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250603_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250603_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 14:37:41,663 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 14:37:41,669 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7s7uebaa 2026-03-11 14:37:41,695 Soop found: SOOP 2026-03-11 14:37:41,794 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/03/CAL/solo_CAL_stix-cal-energy_20250603T080405-20250603T102805_V02.fits 2026-03-11 14:37:41,965 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ab2u10s_ 2026-03-11 14:37:41,965 Read config from in: /tmp/ecc_context_ecc_cfg_1_ab2u10s_/post_ecc.ini 2026-03-11 14:37:43,218 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ab2u10s_/solo_L1_stix-cal-energy_20250617_V03_ecc_in.fits 2026-03-11 14:47:05,696 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250617_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250617_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250617_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250617_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 14:47:11,916 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 14:47:11,924 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ab2u10s_ 2026-03-11 14:47:11,952 Soop found: SOOP 2026-03-11 14:47:12,050 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/17/CAL/solo_CAL_stix-cal-energy_20250617T002206-20250617T024606_V02.fits 2026-03-11 14:47:12,204 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pea7abe_ 2026-03-11 14:47:12,205 Read config from in: /tmp/ecc_context_ecc_cfg_1_pea7abe_/post_ecc.ini 2026-03-11 14:47:13,456 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pea7abe_/solo_L1_stix-cal-energy_20250618_V03_ecc_in.fits 2026-03-11 14:56:46,986 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250618_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250618_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250618_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250618_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 14:56:53,289 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 14:56:53,295 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pea7abe_ 2026-03-11 14:56:53,320 Soop found: SOOP 2026-03-11 14:56:53,417 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/18/CAL/solo_CAL_stix-cal-energy_20250618T002213-20250618T024614_V02.fits 2026-03-11 14:56:53,572 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ihqkszum 2026-03-11 14:56:53,572 Read config from in: /tmp/ecc_context_ecc_cfg_1_ihqkszum/post_ecc.ini 2026-03-11 14:56:54,816 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ihqkszum/solo_L1_stix-cal-energy_20250623_V03_ecc_in.fits 2026-03-11 15:06:17,462 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250623_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250623_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250623_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 15:06:24,419 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 15:06:24,426 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ihqkszum 2026-03-11 15:06:24,456 Soop found: SOOP 2026-03-11 15:06:24,560 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/23/CAL/solo_CAL_stix-cal-energy_20250623T010121-20250623T032520_V02.fits 2026-03-11 15:06:24,722 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fsk67pby 2026-03-11 15:06:24,723 Read config from in: /tmp/ecc_context_ecc_cfg_1_fsk67pby/post_ecc.ini 2026-03-11 15:06:25,987 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fsk67pby/solo_L1_stix-cal-energy_20250616_V03_ecc_in.fits 2026-03-11 15:15:57,529 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250616_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250616_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250616_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250616_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 15:16:05,093 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 15:16:05,100 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fsk67pby 2026-03-11 15:16:05,126 Soop found: SOOP 2026-03-11 15:16:05,221 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/16/CAL/solo_CAL_stix-cal-energy_20250616T002200-20250616T024600_V02.fits 2026-03-11 15:16:05,376 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_375v9bhh 2026-03-11 15:16:05,376 Read config from in: /tmp/ecc_context_ecc_cfg_1_375v9bhh/post_ecc.ini 2026-03-11 15:16:06,603 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_375v9bhh/solo_L1_stix-cal-energy_20250621_V03_ecc_in.fits 2026-03-11 15:25:30,341 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250621_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250621_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250621_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250621_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 15:25:36,567 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 15:25:36,574 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_375v9bhh 2026-03-11 15:25:36,599 Soop found: SOOP 2026-03-11 15:25:36,696 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/21/CAL/solo_CAL_stix-cal-energy_20250621T002650-20250621T025050_V02.fits 2026-03-11 15:25:36,860 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n5kv7wdw 2026-03-11 15:25:36,861 Read config from in: /tmp/ecc_context_ecc_cfg_1_n5kv7wdw/post_ecc.ini 2026-03-11 15:25:38,105 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n5kv7wdw/solo_L1_stix-cal-energy_20250612_V03_ecc_in.fits 2026-03-11 15:35:10,215 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250612_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250612_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250612_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250612_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 15:35:16,415 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 15:35:16,422 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n5kv7wdw 2026-03-11 15:35:16,447 Soop found: SOOP 2026-03-11 15:35:16,542 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/12/CAL/solo_CAL_stix-cal-energy_20250612T001109-20250612T023508_V02.fits 2026-03-11 15:35:16,698 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q9k2rnmz 2026-03-11 15:35:16,698 Read config from in: /tmp/ecc_context_ecc_cfg_1_q9k2rnmz/post_ecc.ini 2026-03-11 15:35:17,925 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q9k2rnmz/solo_L1_stix-cal-energy_20250627_V03_ecc_in.fits 2026-03-11 15:44:41,522 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250627_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250627_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250627_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250627_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 15:44:47,729 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 15:44:47,735 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q9k2rnmz 2026-03-11 15:44:47,761 Soop found: SOOP 2026-03-11 15:44:47,857 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/27/CAL/solo_CAL_stix-cal-energy_20250627T010406-20250627T032805_V02.fits 2026-03-11 15:44:48,013 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o3x5_jkc 2026-03-11 15:44:48,013 Read config from in: /tmp/ecc_context_ecc_cfg_1_o3x5_jkc/post_ecc.ini 2026-03-11 15:44:49,276 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o3x5_jkc/solo_L1_stix-cal-energy_20250611_V03_ecc_in.fits 2026-03-11 15:54:17,927 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250611_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250611_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250611_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250611_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 15:54:24,147 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 15:54:24,154 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o3x5_jkc 2026-03-11 15:54:24,179 Soop found: SOOP 2026-03-11 15:54:24,277 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/11/CAL/solo_CAL_stix-cal-energy_20250611T001103-20250611T023503_V02.fits 2026-03-11 15:54:24,433 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o7n_vt5p 2026-03-11 15:54:24,433 Read config from in: /tmp/ecc_context_ecc_cfg_1_o7n_vt5p/post_ecc.ini 2026-03-11 15:54:25,689 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o7n_vt5p/solo_L1_stix-cal-energy_20250626_V03_ecc_in.fits 2026-03-11 16:03:55,655 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250626_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250626_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250626_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250626_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 16:04:01,956 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 16:04:01,963 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o7n_vt5p 2026-03-11 16:04:01,992 Soop found: SOOP 2026-03-11 16:04:02,090 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/26/CAL/solo_CAL_stix-cal-energy_20250626T010400-20250626T032800_V02.fits 2026-03-11 16:04:02,527 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l_2f_bhu 2026-03-11 16:04:02,528 Read config from in: /tmp/ecc_context_ecc_cfg_1_l_2f_bhu/post_ecc.ini 2026-03-11 16:04:05,178 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l_2f_bhu/solo_L1_stix-cal-energy_20250619_V03_ecc_in.fits 2026-03-11 16:13:38,931 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250619_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250619_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250619_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250619_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 16:13:45,322 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 16:13:45,329 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l_2f_bhu 2026-03-11 16:13:45,357 Soop found: SOOP 2026-03-11 16:13:45,455 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/19/CAL/solo_CAL_stix-cal-energy_20250619T002257-20250619T024657_V02.fits 2026-03-11 16:13:45,907 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cuj1yndp 2026-03-11 16:13:45,908 Read config from in: /tmp/ecc_context_ecc_cfg_1_cuj1yndp/post_ecc.ini 2026-03-11 16:13:47,155 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cuj1yndp/solo_L1_stix-cal-energy_20250622_V03_ecc_in.fits 2026-03-11 16:23:34,450 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250622_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250622_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250622_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250622_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 16:23:40,724 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 16:23:40,731 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cuj1yndp 2026-03-11 16:23:40,757 Soop found: SOOP 2026-03-11 16:23:40,858 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/22/CAL/solo_CAL_stix-cal-energy_20250622T002656-20250622T025149_V02.fits 2026-03-11 16:23:41,017 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_33zuncps 2026-03-11 16:23:41,018 Read config from in: /tmp/ecc_context_ecc_cfg_1_33zuncps/post_ecc.ini 2026-03-11 16:23:42,258 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_33zuncps/solo_L1_stix-cal-energy_20250625_V03_ecc_in.fits 2026-03-11 16:33:25,192 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250625_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250625_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250625_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250625_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 16:33:31,474 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 16:33:31,481 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_33zuncps 2026-03-11 16:33:31,506 Soop found: SOOP 2026-03-11 16:33:31,606 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/25/CAL/solo_CAL_stix-cal-energy_20250625T010354-20250625T032754_V02.fits 2026-03-11 16:33:31,762 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ceqfl8bo 2026-03-11 16:33:31,762 Read config from in: /tmp/ecc_context_ecc_cfg_1_ceqfl8bo/post_ecc.ini 2026-03-11 16:33:32,989 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ceqfl8bo/solo_L1_stix-cal-energy_20250628_V03_ecc_in.fits 2026-03-11 16:42:54,504 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250628_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250628_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250628_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250628_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 16:43:00,834 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 16:43:00,841 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ceqfl8bo 2026-03-11 16:43:00,867 Soop found: SOOP 2026-03-11 16:43:00,963 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/28/CAL/solo_CAL_stix-cal-energy_20250628T010411-20250628T032811_V02.fits 2026-03-11 16:43:01,142 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1l9cyigz 2026-03-11 16:43:01,142 Read config from in: /tmp/ecc_context_ecc_cfg_1_1l9cyigz/post_ecc.ini 2026-03-11 16:43:02,414 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1l9cyigz/solo_L1_stix-cal-energy_20250609_V03_ecc_in.fits 2026-03-11 16:52:40,652 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250609_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250609_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250609_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250609_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 16:52:46,943 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 16:52:46,949 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1l9cyigz 2026-03-11 16:52:46,976 Soop found: SOOP 2026-03-11 16:52:47,070 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/09/CAL/solo_CAL_stix-cal-energy_20250609T000618-20250609T023018_V02.fits 2026-03-11 16:52:47,227 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c005po38 2026-03-11 16:52:47,228 Read config from in: /tmp/ecc_context_ecc_cfg_1_c005po38/post_ecc.ini 2026-03-11 16:52:48,476 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c005po38/solo_L1_stix-cal-energy_20250629_V03_ecc_in.fits 2026-03-11 17:02:12,292 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250629_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250629_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250629_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250629_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 17:02:19,960 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 17:02:19,967 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c005po38 2026-03-11 17:02:19,991 Soop found: SOOP 2026-03-11 17:02:20,087 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/29/CAL/solo_CAL_stix-cal-energy_20250629T010418-20250629T032829_V02.fits 2026-03-11 17:02:20,242 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2ikohxzd 2026-03-11 17:02:20,243 Read config from in: /tmp/ecc_context_ecc_cfg_1_2ikohxzd/post_ecc.ini 2026-03-11 17:02:21,473 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2ikohxzd/solo_L1_stix-cal-energy_20250602_V03_ecc_in.fits 2026-03-11 17:11:53,198 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250602_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250602_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250602_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250602_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 17:11:59,488 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 17:11:59,495 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2ikohxzd 2026-03-11 17:11:59,521 Soop found: SOOP 2026-03-11 17:11:59,619 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/02/CAL/solo_CAL_stix-cal-energy_20250602T080357-20250602T102757_V02.fits 2026-03-11 17:11:59,783 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4aq_djle 2026-03-11 17:11:59,783 Read config from in: /tmp/ecc_context_ecc_cfg_1_4aq_djle/post_ecc.ini 2026-03-11 17:12:01,026 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4aq_djle/solo_L1_stix-cal-energy_20250613_V03_ecc_in.fits 2026-03-11 17:21:34,607 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250613_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250613_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250613_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250613_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 17:21:40,945 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 17:21:40,956 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4aq_djle 2026-03-11 17:21:40,987 Soop found: SOOP 2026-03-11 17:21:41,087 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/13/CAL/solo_CAL_stix-cal-energy_20250613T001115-20250613T023517_V02.fits 2026-03-11 17:21:41,253 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r9nwm0bh 2026-03-11 17:21:41,253 Read config from in: /tmp/ecc_context_ecc_cfg_1_r9nwm0bh/post_ecc.ini 2026-03-11 17:21:42,496 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r9nwm0bh/solo_L1_stix-cal-energy_20250615_V03_ecc_in.fits 2026-03-11 17:31:18,131 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250615_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250615_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250615_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250615_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 17:31:24,466 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 17:31:24,473 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r9nwm0bh 2026-03-11 17:31:24,504 Soop found: SOOP 2026-03-11 17:31:24,602 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/15/CAL/solo_CAL_stix-cal-energy_20250615T001204-20250615T023451_V02.fits 2026-03-11 17:31:24,760 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i8h7xxne 2026-03-11 17:31:24,761 Read config from in: /tmp/ecc_context_ecc_cfg_1_i8h7xxne/post_ecc.ini 2026-03-11 17:31:26,012 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i8h7xxne/solo_L1_stix-cal-energy_20250604_V03_ecc_in.fits 2026-03-11 17:40:58,282 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250604_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250604_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250604_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250604_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 17:41:04,572 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 17:41:04,578 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i8h7xxne 2026-03-11 17:41:04,605 Soop found: SOOP 2026-03-11 17:41:04,704 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/04/CAL/solo_CAL_stix-cal-energy_20250604T080410-20250604T102810_V02.fits 2026-03-11 17:41:04,856 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u2xujgoq 2026-03-11 17:41:04,857 Read config from in: /tmp/ecc_context_ecc_cfg_1_u2xujgoq/post_ecc.ini 2026-03-11 17:41:06,101 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u2xujgoq/solo_L1_stix-cal-energy_20250330_V03_ecc_in.fits 2026-03-11 17:51:34,263 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250330_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250330_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250330_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250330_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 17:51:40,473 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-11 17:51:40,480 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u2xujgoq 2026-03-11 17:51:40,505 Soop found: SOOP 2026-03-11 17:51:40,607 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/30/CAL/solo_CAL_stix-cal-energy_20250330T000417-20250330T023004_V02.fits 2026-03-11 17:51:40,760 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hjp5hrfd 2026-03-11 17:51:40,760 Read config from in: /tmp/ecc_context_ecc_cfg_1_hjp5hrfd/post_ecc.ini 2026-03-11 17:51:42,001 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hjp5hrfd/solo_L1_stix-cal-energy_20250310_V03_ecc_in.fits 2026-03-11 18:01:15,339 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250310_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250310_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250310_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250310_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 18:01:22,907 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 18:01:22,914 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hjp5hrfd 2026-03-11 18:01:22,938 Soop found: SOOP 2026-03-11 18:01:23,035 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/10/CAL/solo_CAL_stix-cal-energy_20250309T230555-20250310T012955_V02.fits 2026-03-11 18:01:23,192 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i18egmqm 2026-03-11 18:01:23,192 Read config from in: /tmp/ecc_context_ecc_cfg_1_i18egmqm/post_ecc.ini 2026-03-11 18:01:24,436 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i18egmqm/solo_L1_stix-cal-energy_20250301_V03_ecc_in.fits 2026-03-11 18:16:11,594 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250301_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250301_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250301_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250301_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 18:16:17,799 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 18:16:17,806 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i18egmqm 2026-03-11 18:16:17,830 Soop found: SOOP 2026-03-11 18:16:17,928 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/01/CAL/solo_CAL_stix-cal-energy_20250228T230459-20250301T012859_V02.fits 2026-03-11 18:16:18,083 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__1_hnjqh 2026-03-11 18:16:18,083 Read config from in: /tmp/ecc_context_ecc_cfg_1__1_hnjqh/post_ecc.ini 2026-03-11 18:16:19,323 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__1_hnjqh/solo_L1_stix-cal-energy_20250324_V03_ecc_in.fits 2026-03-11 18:25:39,700 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250324_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250324_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250324_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250324_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 18:25:46,653 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 18:25:46,661 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__1_hnjqh 2026-03-11 18:25:46,688 Soop found: SOOP 2026-03-11 18:25:46,794 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/24/CAL/solo_CAL_stix-cal-energy_20250324T020413-20250324T042813_V02.fits 2026-03-11 18:25:46,940 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yya22tjx 2026-03-11 18:25:46,941 Read config from in: /tmp/ecc_context_ecc_cfg_1_yya22tjx/post_ecc.ini 2026-03-11 18:25:48,217 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yya22tjx/solo_L1_stix-cal-energy_20250308_V03_ecc_in.fits 2026-03-11 18:35:24,595 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250308_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250308_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250308_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 18:35:30,845 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 18:35:30,855 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yya22tjx 2026-03-11 18:35:30,881 Soop found: SOOP 2026-03-11 18:35:30,881 Soop found: SOOP 2026-03-11 18:35:30,978 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/08/CAL/solo_CAL_stix-cal-energy_20250307T230542-20250308T012942_V02.fits 2026-03-11 18:35:31,134 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qn19zdrl 2026-03-11 18:35:31,134 Read config from in: /tmp/ecc_context_ecc_cfg_1_qn19zdrl/post_ecc.ini 2026-03-11 18:35:32,380 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qn19zdrl/solo_L1_stix-cal-energy_20250305_V03_ecc_in.fits 2026-03-11 18:44:57,284 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250305_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250305_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250305_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250305_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 18:45:03,561 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 18:45:03,568 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qn19zdrl 2026-03-11 18:45:03,594 Soop found: SOOP 2026-03-11 18:45:03,691 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/05/CAL/solo_CAL_stix-cal-energy_20250304T230524-20250305T012923_V02.fits 2026-03-11 18:45:03,830 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3mt3ljks 2026-03-11 18:45:03,831 Read config from in: /tmp/ecc_context_ecc_cfg_1_3mt3ljks/post_ecc.ini 2026-03-11 18:45:05,081 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3mt3ljks/solo_L1_stix-cal-energy_20250314_V03_ecc_in.fits 2026-03-11 18:55:03,057 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250314_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250314_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250314_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250314_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 18:55:09,316 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 18:55:09,324 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3mt3ljks 2026-03-11 18:55:09,355 Soop found: SOOP 2026-03-11 18:55:09,453 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/14/CAL/solo_CAL_stix-cal-energy_20250313T235452-20250314T021852_V02.fits 2026-03-11 18:55:09,595 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m130uugt 2026-03-11 18:55:09,595 Read config from in: /tmp/ecc_context_ecc_cfg_1_m130uugt/post_ecc.ini 2026-03-11 18:55:12,278 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m130uugt/solo_L1_stix-cal-energy_20250307_V03_ecc_in.fits 2026-03-11 19:04:44,457 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250307_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250307_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250307_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250307_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 19:04:50,674 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 19:04:50,681 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m130uugt 2026-03-11 19:04:50,706 Soop found: SOOP 2026-03-11 19:04:50,800 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/07/CAL/solo_CAL_stix-cal-energy_20250306T230536-20250307T012935_V02.fits 2026-03-11 19:04:50,953 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oqct7q4e 2026-03-11 19:04:50,954 Read config from in: /tmp/ecc_context_ecc_cfg_1_oqct7q4e/post_ecc.ini 2026-03-11 19:04:52,187 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oqct7q4e/solo_L1_stix-cal-energy_20250320_V03_ecc_in.fits 2026-03-11 19:14:49,816 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250320_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250320_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250320_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250320_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 19:14:56,040 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 19:14:56,048 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oqct7q4e 2026-03-11 19:14:56,072 Soop found: SOOP 2026-03-11 19:14:56,171 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/20/CAL/solo_CAL_stix-cal-energy_20250320T002200-20250320T024600_V02.fits 2026-03-11 19:14:56,312 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_79gcjkb9 2026-03-11 19:14:56,312 Read config from in: /tmp/ecc_context_ecc_cfg_1_79gcjkb9/post_ecc.ini 2026-03-11 19:14:57,550 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_79gcjkb9/solo_L1_stix-cal-energy_20250306_V03_ecc_in.fits 2026-03-11 19:24:35,165 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250306_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250306_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250306_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 19:24:41,335 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 19:24:41,342 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_79gcjkb9 2026-03-11 19:24:41,366 Soop found: SOOP 2026-03-11 19:24:41,460 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/06/CAL/solo_CAL_stix-cal-energy_20250305T230530-20250306T012930_V02.fits 2026-03-11 19:24:41,614 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__kh2g61m 2026-03-11 19:24:41,614 Read config from in: /tmp/ecc_context_ecc_cfg_1__kh2g61m/post_ecc.ini 2026-03-11 19:24:42,863 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__kh2g61m/solo_L1_stix-cal-energy_20250303_V03_ecc_in.fits 2026-03-11 19:34:16,340 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250303_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250303_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250303_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250303_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 19:34:22,546 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 19:34:22,553 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__kh2g61m 2026-03-11 19:34:22,577 Soop found: SOOP 2026-03-11 19:34:22,670 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/03/CAL/solo_CAL_stix-cal-energy_20250302T230511-20250303T012911_V02.fits 2026-03-11 19:34:22,825 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__kezygt9 2026-03-11 19:34:22,826 Read config from in: /tmp/ecc_context_ecc_cfg_1__kezygt9/post_ecc.ini 2026-03-11 19:34:24,071 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__kezygt9/solo_L1_stix-cal-energy_20250317_V03_ecc_in.fits 2026-03-11 19:44:34,169 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250317_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250317_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250317_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 19:44:40,442 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-11 19:44:40,449 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__kezygt9 2026-03-11 19:44:40,475 Soop found: SOOP 2026-03-11 19:44:40,576 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/17/CAL/solo_CAL_stix-cal-energy_20250316T235511-20250317T021911_V02.fits 2026-03-11 19:44:40,735 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fnmcnj5u 2026-03-11 19:44:40,736 Read config from in: /tmp/ecc_context_ecc_cfg_1_fnmcnj5u/post_ecc.ini 2026-03-11 19:44:41,988 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fnmcnj5u/solo_L1_stix-cal-energy_20250331_V03_ecc_in.fits 2026-03-11 19:55:00,593 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250331_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250331_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250331_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250331_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 19:55:08,222 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 19:55:08,229 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fnmcnj5u 2026-03-11 19:55:08,254 No soops found for time: 2025-03-31 00:31:27.472995 - 2025-03-31 02:55:28.489466 2026-03-11 19:55:08,350 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/31/CAL/solo_CAL_stix-cal-energy_20250331T003127-20250331T025528_V02.fits 2026-03-11 19:55:08,505 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1egx4mv9 2026-03-11 19:55:08,506 Read config from in: /tmp/ecc_context_ecc_cfg_1_1egx4mv9/post_ecc.ini 2026-03-11 19:55:09,744 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1egx4mv9/solo_L1_stix-cal-energy_20250318_V03_ecc_in.fits 2026-03-11 20:05:24,829 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250318_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250318_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250318_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250318_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 20:05:31,013 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-11 20:05:31,020 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1egx4mv9 2026-03-11 20:05:31,044 Soop found: SOOP 2026-03-11 20:05:31,141 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/18/CAL/solo_CAL_stix-cal-energy_20250317T235518-20250318T021918_V02.fits 2026-03-11 20:05:31,280 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1gy1ankl 2026-03-11 20:05:31,280 Read config from in: /tmp/ecc_context_ecc_cfg_1_1gy1ankl/post_ecc.ini 2026-03-11 20:05:32,514 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1gy1ankl/solo_L1_stix-cal-energy_20250323_V03_ecc_in.fits 2026-03-11 20:15:01,197 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250323_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250323_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250323_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250323_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 20:15:07,414 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 20:15:07,421 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1gy1ankl 2026-03-11 20:15:07,446 Soop found: SOOP 2026-03-11 20:15:07,545 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/23/CAL/solo_CAL_stix-cal-energy_20250323T011146-20250323T033552_V02.fits 2026-03-11 20:15:07,706 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wbgpyv1t 2026-03-11 20:15:07,707 Read config from in: /tmp/ecc_context_ecc_cfg_1_wbgpyv1t/post_ecc.ini 2026-03-11 20:15:08,946 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wbgpyv1t/solo_L1_stix-cal-energy_20250316_V03_ecc_in.fits 2026-03-11 20:25:20,485 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250316_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250316_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250316_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250316_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 20:25:26,686 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 20:25:26,693 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wbgpyv1t 2026-03-11 20:25:26,717 No soops found for time: 2025-03-15 23:55:05.015301 - 2025-03-16 02:19:05.031476 2026-03-11 20:25:26,814 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/16/CAL/solo_CAL_stix-cal-energy_20250315T235505-20250316T021905_V02.fits 2026-03-11 20:25:26,969 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wb8u7lcm 2026-03-11 20:25:26,969 Read config from in: /tmp/ecc_context_ecc_cfg_1_wb8u7lcm/post_ecc.ini 2026-03-11 20:25:28,207 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wb8u7lcm/solo_L1_stix-cal-energy_20250321_V03_ecc_in.fits 2026-03-11 20:35:08,077 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250321_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250321_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250321_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250321_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 20:35:14,995 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 20:35:15,002 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wb8u7lcm 2026-03-11 20:35:15,030 No soops found for time: 2025-03-21 00:22:06.832202 - 2025-03-21 02:47:41.848654 2026-03-11 20:35:15,134 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/21/CAL/solo_CAL_stix-cal-energy_20250321T002206-20250321T024741_V02.fits 2026-03-11 20:35:15,285 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5r2khr6p 2026-03-11 20:35:15,286 Read config from in: /tmp/ecc_context_ecc_cfg_1_5r2khr6p/post_ecc.ini 2026-03-11 20:35:16,560 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5r2khr6p/solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits 2026-03-11 20:44:51,471 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 20:44:57,702 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 20:44:57,709 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5r2khr6p 2026-03-11 20:44:57,742 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kwzwq7pw 2026-03-11 20:44:57,743 Read config from in: /tmp/ecc_context_ecc_cfg_1_kwzwq7pw/post_ecc.ini 2026-03-11 20:44:59,010 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kwzwq7pw/solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits 2026-03-11 20:53:03,033 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250312_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 20:53:17,277 Run ecc post fit: replaced [94.8 %] gain offset pairs with 'better fits' 2026-03-11 20:53:17,279 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,279 ECC result Gain_Prime 0.0 for DET 2 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,279 ECC result Gain_Prime 0.0 for DET 5 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,279 ECC result Gain_Prime 0.0 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,279 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 10 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 22 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 24 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 25 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 27 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,280 ECC result Gain_Prime 0.0 for DET 27 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,281 ECC result Gain_Prime 0.0 for DET 29 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,281 ECC result Gain_Prime 0.0 for DET 29 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,281 ECC result Gain_Prime 0.0 for DET 30 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,281 ECC result Gain_Prime 0.0 for DET 30 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,281 ECC result Gain_Prime 0.0 for DET 32 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 20:53:17,285 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kwzwq7pw 2026-03-11 20:53:17,311 Soop found: SOOP 2026-03-11 20:53:17,412 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/12/CAL/solo_CAL_stix-cal-energy_20250311T230607-20250312T013007_V02.fits 2026-03-11 20:53:17,447 Soop found: SOOP 2026-03-11 20:53:17,540 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/12/CAL/solo_CAL_stix-cal-energy_20250312T230613-20250312T231039_V02.fits 2026-03-11 20:53:17,709 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v_5rls2f 2026-03-11 20:53:17,710 Read config from in: /tmp/ecc_context_ecc_cfg_1_v_5rls2f/post_ecc.ini 2026-03-11 20:53:18,953 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v_5rls2f/solo_L1_stix-cal-energy_20250327_V03_ecc_in.fits 2026-03-11 21:03:17,158 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250327_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250327_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250327_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250327_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 21:03:23,350 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 21:03:23,359 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v_5rls2f 2026-03-11 21:03:23,384 Soop found: SOOP 2026-03-11 21:03:23,485 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/27/CAL/solo_CAL_stix-cal-energy_20250327T022601-20250327T045001_V02.fits 2026-03-11 21:03:23,624 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wxc8szby 2026-03-11 21:03:23,625 Read config from in: /tmp/ecc_context_ecc_cfg_1_wxc8szby/post_ecc.ini 2026-03-11 21:03:24,856 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wxc8szby/solo_L1_stix-cal-energy_20250311_V03_ecc_in.fits 2026-03-11 21:12:57,316 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250311_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250311_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250311_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250311_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 21:13:03,547 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 21:13:03,554 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wxc8szby 2026-03-11 21:13:03,580 Soop found: SOOP 2026-03-11 21:13:03,676 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/11/CAL/solo_CAL_stix-cal-energy_20250310T230601-20250311T013001_V02.fits 2026-03-11 21:13:03,833 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o0b4dja7 2026-03-11 21:13:03,833 Read config from in: /tmp/ecc_context_ecc_cfg_1_o0b4dja7/post_ecc.ini 2026-03-11 21:13:05,095 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o0b4dja7/solo_L1_stix-cal-energy_20250326_V03_ecc_in.fits 2026-03-11 21:22:36,647 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250326_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250326_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250326_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250326_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 21:22:42,804 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 21:22:42,810 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o0b4dja7 2026-03-11 21:22:42,835 Soop found: SOOP 2026-03-11 21:22:42,935 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/26/CAL/solo_CAL_stix-cal-energy_20250326T022556-20250326T044955_V02.fits 2026-03-11 21:22:43,076 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x370uv5y 2026-03-11 21:22:43,077 Read config from in: /tmp/ecc_context_ecc_cfg_1_x370uv5y/post_ecc.ini 2026-03-11 21:22:44,317 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x370uv5y/solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits 2026-03-11 21:32:25,972 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 21:32:32,200 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 21:32:32,207 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x370uv5y 2026-03-11 21:32:32,239 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o0vl8xua 2026-03-11 21:32:32,239 Read config from in: /tmp/ecc_context_ecc_cfg_1_o0vl8xua/post_ecc.ini 2026-03-11 21:32:33,492 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o0vl8xua/solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits 2026-03-11 21:35:46,412 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250319_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 21:37:42,041 Run ecc post fit: replaced [62.2 %] gain offset pairs with 'better fits' 2026-03-11 21:37:42,043 ECC result Gain_Prime 1.6029110360127325 for DET 1 PIX 7 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,043 ECC result Gain_Prime 1.6152522932999207 for DET 4 PIX 5 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,043 ECC result Gain_Prime 1.6152522932999207 for DET 4 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,043 ECC result Gain_Prime 1.6152522932999207 for DET 9 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,043 ECC result Gain_Prime 1.6152522932999207 for DET 11 PIX 3 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,043 ECC result Gain_Prime 1.6173472156964197 for DET 26 PIX 0 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,044 ECC result Gain_Prime 1.605635020319646 for DET 29 PIX 3 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,044 ECC result Gain_Prime 1.6152522932999207 for DET 29 PIX 7 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,044 ECC result Gain_Prime 1.605635020319646 for DET 31 PIX 1 exceeds Max_Gain 1.4, but not in ignore list 2026-03-11 21:37:42,044 ECC result Gain_Prime 0.0 for DET 1 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,044 ECC result Gain_Prime 0.0 for DET 1 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,044 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,044 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 2 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 2 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 2 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 2 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 2 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 3 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 3 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 4 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 4 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,045 ECC result Gain_Prime 0.0 for DET 4 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 5 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 5 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 5 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 5 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 5 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 6 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 6 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 6 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 6 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,046 ECC result Gain_Prime 0.0 for DET 7 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 7 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 7 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 7 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 8 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 8 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 8 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 9 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 9 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 9 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,047 ECC result Gain_Prime 0.0 for DET 9 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 9 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 10 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 10 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 10 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 10 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 10 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 11 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 11 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 11 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,048 ECC result Gain_Prime 0.0 for DET 11 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 12 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 12 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 12 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 12 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 12 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 12 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 13 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 13 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 14 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 14 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,049 ECC result Gain_Prime 0.0 for DET 14 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 14 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 14 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 15 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 15 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 15 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 15 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 16 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 16 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 16 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 16 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,050 ECC result Gain_Prime 0.0 for DET 16 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 17 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 17 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 17 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 17 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 17 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 17 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 17 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 17 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 18 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,051 ECC result Gain_Prime 0.0 for DET 18 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 19 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 19 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 19 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 19 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 20 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 20 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 20 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 20 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 20 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,052 ECC result Gain_Prime 0.0 for DET 21 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 21 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 22 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 22 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 22 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 22 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 22 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 23 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 23 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,053 ECC result Gain_Prime 0.0 for DET 23 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 23 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 24 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 24 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 24 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 25 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 25 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 25 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 25 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 25 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,054 ECC result Gain_Prime 0.0 for DET 26 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 26 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 26 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 26 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 26 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 27 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 27 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 27 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 27 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 27 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,055 ECC result Gain_Prime 0.0 for DET 28 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 28 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 28 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 29 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 29 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 30 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 30 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 31 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 31 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 31 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 31 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,056 ECC result Gain_Prime 0.0 for DET 31 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,057 ECC result Gain_Prime 0.0 for DET 31 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,057 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,057 ECC result Gain_Prime 0.0 for DET 32 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,057 ECC result Gain_Prime 0.0 for DET 32 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,057 ECC result Gain_Prime 0.0 for DET 32 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,057 ECC result Gain_Prime 0.0 for DET 32 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-11 21:37:42,062 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o0vl8xua 2026-03-11 21:37:42,086 Soop found: SOOP 2026-03-11 21:37:42,184 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/19/CAL/solo_CAL_stix-cal-energy_20250318T235524-20250319T021924_V02.fits 2026-03-11 21:37:42,220 Soop found: SOOP 2026-03-11 21:37:42,316 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/19/CAL/solo_CAL_stix-cal-energy_20250319T235531-20250319T235558_V02.fits 2026-03-11 21:37:42,453 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7ml_llaq 2026-03-11 21:37:42,453 Read config from in: /tmp/ecc_context_ecc_cfg_1_7ml_llaq/post_ecc.ini 2026-03-11 21:37:43,695 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7ml_llaq/solo_L1_stix-cal-energy_20250322_V03_ecc_in.fits 2026-03-11 21:47:14,855 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250322_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250322_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250322_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250322_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 21:47:21,030 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 21:47:21,037 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7ml_llaq 2026-03-11 21:47:21,062 Soop found: SOOP 2026-03-11 21:47:21,158 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/22/CAL/solo_CAL_stix-cal-energy_20250322T011140-20250322T033540_V02.fits 2026-03-11 21:47:21,294 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9go5rem6 2026-03-11 21:47:21,295 Read config from in: /tmp/ecc_context_ecc_cfg_1_9go5rem6/post_ecc.ini 2026-03-11 21:47:22,542 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9go5rem6/solo_L1_stix-cal-energy_20250325_V03_ecc_in.fits 2026-03-11 21:56:42,211 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250325_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250325_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250325_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250325_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 21:56:48,488 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 21:56:48,495 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9go5rem6 2026-03-11 21:56:48,521 Soop found: SOOP 2026-03-11 21:56:48,620 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/25/CAL/solo_CAL_stix-cal-energy_20250325T021154-20250325T043717_V02.fits 2026-03-11 21:56:48,780 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_firh0nhz 2026-03-11 21:56:48,781 Read config from in: /tmp/ecc_context_ecc_cfg_1_firh0nhz/post_ecc.ini 2026-03-11 21:56:50,044 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_firh0nhz/solo_L1_stix-cal-energy_20250328_V03_ecc_in.fits 2026-03-11 22:07:01,060 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250328_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250328_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250328_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250328_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 22:07:07,360 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 22:07:07,366 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_firh0nhz 2026-03-11 22:07:07,393 Soop found: SOOP 2026-03-11 22:07:07,490 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/28/CAL/solo_CAL_stix-cal-energy_20250328T022607-20250328T043531_V02.fits 2026-03-11 22:07:07,630 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ucr8lu48 2026-03-11 22:07:07,631 Read config from in: /tmp/ecc_context_ecc_cfg_1_ucr8lu48/post_ecc.ini 2026-03-11 22:07:08,882 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ucr8lu48/solo_L1_stix-cal-energy_20250309_V03_ecc_in.fits 2026-03-11 22:16:45,540 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250309_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250309_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250309_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250309_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 22:16:51,854 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 22:16:51,861 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ucr8lu48 2026-03-11 22:16:51,886 Soop found: SOOP 2026-03-11 22:16:51,989 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/09/CAL/solo_CAL_stix-cal-energy_20250308T230547-20250309T012947_V02.fits 2026-03-11 22:16:52,146 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tv8ytuod 2026-03-11 22:16:52,146 Read config from in: /tmp/ecc_context_ecc_cfg_1_tv8ytuod/post_ecc.ini 2026-03-11 22:16:53,396 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tv8ytuod/solo_L1_stix-cal-energy_20250329_V03_ecc_in.fits 2026-03-11 22:27:15,578 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250329_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250329_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250329_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250329_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 22:27:23,268 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-11 22:27:23,275 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tv8ytuod 2026-03-11 22:27:23,300 No soops found for time: 2025-03-29 00:04:11.140503 - 2025-03-29 02:28:11.156972 2026-03-11 22:27:23,394 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/29/CAL/solo_CAL_stix-cal-energy_20250329T000411-20250329T022811_V02.fits 2026-03-11 22:27:23,535 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4m2115ro 2026-03-11 22:27:23,535 Read config from in: /tmp/ecc_context_ecc_cfg_1_4m2115ro/post_ecc.ini 2026-03-11 22:27:24,773 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4m2115ro/solo_L1_stix-cal-energy_20250302_V03_ecc_in.fits 2026-03-11 22:37:06,883 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250302_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250302_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250302_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250302_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 22:37:13,834 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 22:37:13,842 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4m2115ro 2026-03-11 22:37:13,868 Soop found: SOOP 2026-03-11 22:37:13,970 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/02/CAL/solo_CAL_stix-cal-energy_20250301T230505-20250302T012905_V02.fits 2026-03-11 22:37:14,114 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tp9k6rb2 2026-03-11 22:37:14,114 Read config from in: /tmp/ecc_context_ecc_cfg_1_tp9k6rb2/post_ecc.ini 2026-03-11 22:37:15,379 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tp9k6rb2/solo_L1_stix-cal-energy_20250313_V03_ecc_in.fits 2026-03-11 22:46:56,935 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250313_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250313_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250313_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250313_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 22:47:03,166 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 22:47:03,172 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tp9k6rb2 2026-03-11 22:47:03,196 Soop found: SOOP 2026-03-11 22:47:03,290 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/13/CAL/solo_CAL_stix-cal-energy_20250312T235446-20250313T021846_V02.fits 2026-03-11 22:47:03,447 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t9hadofm 2026-03-11 22:47:03,448 Read config from in: /tmp/ecc_context_ecc_cfg_1_t9hadofm/post_ecc.ini 2026-03-11 22:47:04,684 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t9hadofm/solo_L1_stix-cal-energy_20250315_V03_ecc_in.fits 2026-03-11 22:57:13,960 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250315_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250315_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250315_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250315_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 22:57:20,169 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 22:57:20,176 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t9hadofm 2026-03-11 22:57:20,199 Soop found: SOOP 2026-03-11 22:57:20,298 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/15/CAL/solo_CAL_stix-cal-energy_20250314T235458-20250315T021858_V02.fits 2026-03-11 22:57:20,437 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ofqabmta 2026-03-11 22:57:20,438 Read config from in: /tmp/ecc_context_ecc_cfg_1_ofqabmta/post_ecc.ini 2026-03-11 22:57:21,677 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ofqabmta/solo_L1_stix-cal-energy_20250304_V03_ecc_in.fits 2026-03-11 23:06:46,452 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250304_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250304_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250304_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250304_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 23:06:52,657 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 23:06:52,664 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ofqabmta 2026-03-11 23:06:52,688 Soop found: SOOP 2026-03-11 23:06:52,782 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/04/CAL/solo_CAL_stix-cal-energy_20250303T230518-20250304T012918_V02.fits 2026-03-11 23:06:52,923 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1llz80h0 2026-03-11 23:06:52,923 Read config from in: /tmp/ecc_context_ecc_cfg_1_1llz80h0/post_ecc.ini 2026-03-11 23:06:54,162 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1llz80h0/solo_L1_stix-cal-energy_20251230_V03_ecc_in.fits 2026-03-11 23:16:00,847 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251230_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251230_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251230_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251230_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 23:16:07,093 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 23:16:07,100 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1llz80h0 2026-03-11 23:16:07,126 Soop found: SOOP 2026-03-11 23:16:07,229 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/30/CAL/solo_CAL_stix-cal-energy_20251230T022226-20251231T022225_V02.fits 2026-03-11 23:16:07,377 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cn8iaanf 2026-03-11 23:16:07,377 Read config from in: /tmp/ecc_context_ecc_cfg_1_cn8iaanf/post_ecc.ini 2026-03-11 23:16:10,096 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cn8iaanf/solo_L1_stix-cal-energy_20251210_V03_ecc_in.fits 2026-03-11 23:25:36,993 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251210_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251210_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 23:25:43,246 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 23:25:43,256 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cn8iaanf 2026-03-11 23:25:43,281 Soop found: SOOP 2026-03-11 23:25:43,282 Soop found: SOOP 2026-03-11 23:25:43,380 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/10/CAL/solo_CAL_stix-cal-energy_20251210T062211-20251211T062210_V02.fits 2026-03-11 23:25:43,540 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hy4_5ewy 2026-03-11 23:25:43,540 Read config from in: /tmp/ecc_context_ecc_cfg_1_hy4_5ewy/post_ecc.ini 2026-03-11 23:25:44,772 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hy4_5ewy/solo_L1_stix-cal-energy_20251201_V03_ecc_in.fits 2026-03-11 23:35:21,700 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251201_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251201_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 23:35:27,944 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 23:35:27,951 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hy4_5ewy 2026-03-11 23:35:27,975 Soop found: SOOP 2026-03-11 23:35:28,071 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/01/CAL/solo_CAL_stix-cal-energy_20251201T032302-20251202T032303_V02.fits 2026-03-11 23:35:28,211 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wwnjj8dl 2026-03-11 23:35:28,212 Read config from in: /tmp/ecc_context_ecc_cfg_1_wwnjj8dl/post_ecc.ini 2026-03-11 23:35:29,457 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wwnjj8dl/solo_L1_stix-cal-energy_20251224_V03_ecc_in.fits 2026-03-11 23:44:44,572 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251224_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251224_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 23:44:50,801 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 23:44:50,808 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wwnjj8dl 2026-03-11 23:44:50,834 Soop found: SOOP 2026-03-11 23:44:50,930 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/24/CAL/solo_CAL_stix-cal-energy_20251224T055500-20251225T055500_V02.fits 2026-03-11 23:44:51,098 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_33o6vwia 2026-03-11 23:44:51,098 Read config from in: /tmp/ecc_context_ecc_cfg_1_33o6vwia/post_ecc.ini 2026-03-11 23:44:52,335 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_33o6vwia/solo_L1_stix-cal-energy_20251208_V03_ecc_in.fits 2026-03-11 23:54:18,962 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251208_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251208_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-11 23:54:25,271 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-11 23:54:25,278 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_33o6vwia 2026-03-11 23:54:25,302 Soop found: SOOP 2026-03-11 23:54:25,398 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/08/CAL/solo_CAL_stix-cal-energy_20251208T062159-20251209T062158_V02.fits 2026-03-11 23:54:25,540 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mlhanq2k 2026-03-11 23:54:25,540 Read config from in: /tmp/ecc_context_ecc_cfg_1_mlhanq2k/post_ecc.ini 2026-03-11 23:54:26,830 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mlhanq2k/solo_L1_stix-cal-energy_20251205_V03_ecc_in.fits 2026-03-12 00:03:49,741 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 00:03:56,694 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 00:03:56,701 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mlhanq2k 2026-03-12 00:03:56,729 Soop found: SOOP 2026-03-12 00:03:56,836 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/05/CAL/solo_CAL_stix-cal-energy_20251205T050938-20251206T050937_V02.fits 2026-03-12 00:03:56,990 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lrfh4qht 2026-03-12 00:03:56,990 Read config from in: /tmp/ecc_context_ecc_cfg_1_lrfh4qht/post_ecc.ini 2026-03-12 00:03:58,273 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lrfh4qht/solo_L1_stix-cal-energy_20251214_V03_ecc_in.fits 2026-03-12 00:13:24,874 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251214_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251214_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 00:13:33,309 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 00:13:33,317 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lrfh4qht 2026-03-12 00:13:33,344 Soop found: SOOP 2026-03-12 00:13:33,345 Soop found: SOOP 2026-03-12 00:13:33,345 Soop found: SOOP 2026-03-12 00:13:33,443 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/14/CAL/solo_CAL_stix-cal-energy_20251214T062235-20251215T030002_V02.fits 2026-03-12 00:13:33,589 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8uhtakeq 2026-03-12 00:13:33,590 Read config from in: /tmp/ecc_context_ecc_cfg_1_8uhtakeq/post_ecc.ini 2026-03-12 00:13:34,852 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8uhtakeq/solo_L1_stix-cal-energy_20251207_V03_ecc_in.fits 2026-03-12 00:22:49,862 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251207_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251207_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 00:22:56,082 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 00:22:56,090 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8uhtakeq 2026-03-12 00:22:56,116 Soop found: SOOP 2026-03-12 00:22:56,116 Soop found: SOOP 2026-03-12 00:22:56,212 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/07/CAL/solo_CAL_stix-cal-energy_20251207T050949-20251208T055251_V02.fits 2026-03-12 00:22:56,351 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_delhxiiv 2026-03-12 00:22:56,352 Read config from in: /tmp/ecc_context_ecc_cfg_1_delhxiiv/post_ecc.ini 2026-03-12 00:22:57,586 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_delhxiiv/solo_L1_stix-cal-energy_20251220_V03_ecc_in.fits 2026-03-12 00:32:17,480 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 00:32:23,868 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 00:32:23,879 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_delhxiiv 2026-03-12 00:32:23,908 Soop found: SOOP 2026-03-12 00:32:24,008 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/20/CAL/solo_CAL_stix-cal-energy_20251220T044915-20251221T050027_V02.fits 2026-03-12 00:32:24,151 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h7uw6xu3 2026-03-12 00:32:24,152 Read config from in: /tmp/ecc_context_ecc_cfg_1_h7uw6xu3/post_ecc.ini 2026-03-12 00:32:25,383 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h7uw6xu3/solo_L1_stix-cal-energy_20251206_V03_ecc_in.fits 2026-03-12 00:41:42,329 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 00:41:48,612 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 00:41:48,619 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h7uw6xu3 2026-03-12 00:41:48,644 Soop found: SOOP 2026-03-12 00:41:48,737 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/06/CAL/solo_CAL_stix-cal-energy_20251206T050943-20251207T050943_V02.fits 2026-03-12 00:41:48,878 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hiswyrgk 2026-03-12 00:41:48,878 Read config from in: /tmp/ecc_context_ecc_cfg_1_hiswyrgk/post_ecc.ini 2026-03-12 00:41:50,129 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hiswyrgk/solo_L1_stix-cal-energy_20251203_V03_ecc_in.fits 2026-03-12 00:51:12,658 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251203_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251203_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 00:51:18,896 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 00:51:18,904 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hiswyrgk 2026-03-12 00:51:18,930 Soop found: SOOP 2026-03-12 00:51:19,030 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/03/CAL/solo_CAL_stix-cal-energy_20251203T043306-20251204T044352_V02.fits 2026-03-12 00:51:19,175 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7oysicg1 2026-03-12 00:51:19,175 Read config from in: /tmp/ecc_context_ecc_cfg_1_7oysicg1/post_ecc.ini 2026-03-12 00:51:20,414 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7oysicg1/solo_L1_stix-cal-energy_20251217_V03_ecc_in.fits 2026-03-12 01:00:41,370 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251217_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251217_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 01:00:47,678 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 01:00:47,684 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7oysicg1 2026-03-12 01:00:47,710 Soop found: SOOP 2026-03-12 01:00:47,808 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/17/CAL/solo_CAL_stix-cal-energy_20251217T030830-20251218T044856_V02.fits 2026-03-12 01:00:47,955 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c2f5z388 2026-03-12 01:00:47,955 Read config from in: /tmp/ecc_context_ecc_cfg_1_c2f5z388/post_ecc.ini 2026-03-12 01:00:50,833 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c2f5z388/solo_L1_stix-cal-energy_20251231_V03_ecc_in.fits 2026-03-12 01:10:09,889 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251231_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251231_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251231_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251231_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 01:10:16,262 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 01:10:16,269 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c2f5z388 2026-03-12 01:10:16,295 Soop found: SOOP 2026-03-12 01:10:16,391 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/31/CAL/solo_CAL_stix-cal-energy_20251231T022232-20260101T023736_V02.fits 2026-03-12 01:10:16,531 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6ufdk27z 2026-03-12 01:10:16,532 Read config from in: /tmp/ecc_context_ecc_cfg_1_6ufdk27z/post_ecc.ini 2026-03-12 01:10:17,767 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6ufdk27z/solo_L1_stix-cal-energy_20251218_V03_ecc_in.fits 2026-03-12 01:19:44,622 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251218_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251218_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 01:19:51,606 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 01:19:51,614 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6ufdk27z 2026-03-12 01:19:51,642 Soop found: SOOP 2026-03-12 01:19:51,745 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/18/CAL/solo_CAL_stix-cal-energy_20251218T044902-20251219T044901_V02.fits 2026-03-12 01:19:51,892 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vjy9dugb 2026-03-12 01:19:51,893 Read config from in: /tmp/ecc_context_ecc_cfg_1_vjy9dugb/post_ecc.ini 2026-03-12 01:19:53,162 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vjy9dugb/solo_L1_stix-cal-energy_20251223_V03_ecc_in.fits 2026-03-12 01:29:08,202 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251223_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251223_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 01:29:14,532 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 01:29:14,538 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vjy9dugb 2026-03-12 01:29:14,564 Soop found: SOOP 2026-03-12 01:29:14,658 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/23/CAL/solo_CAL_stix-cal-energy_20251223T055455-20251224T055454_V02.fits 2026-03-12 01:29:14,797 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8uk_6fmx 2026-03-12 01:29:14,798 Read config from in: /tmp/ecc_context_ecc_cfg_1_8uk_6fmx/post_ecc.ini 2026-03-12 01:29:16,041 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8uk_6fmx/solo_L1_stix-cal-energy_20251216_V03_ecc_in.fits 2026-03-12 01:38:25,759 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251216_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251216_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 01:38:32,053 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 01:38:32,060 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8uk_6fmx 2026-03-12 01:38:32,085 Soop found: SOOP 2026-03-12 01:38:32,086 Soop found: SOOP 2026-03-12 01:38:32,184 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/16/CAL/solo_CAL_stix-cal-energy_20251216T030507-20251217T030824_V02.fits 2026-03-12 01:38:32,348 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_59vqqut5 2026-03-12 01:38:32,349 Read config from in: /tmp/ecc_context_ecc_cfg_1_59vqqut5/post_ecc.ini 2026-03-12 01:38:33,594 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_59vqqut5/solo_L1_stix-cal-energy_20251221_V03_ecc_in.fits 2026-03-12 01:47:51,292 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251221_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251221_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 01:47:57,623 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 01:47:57,629 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_59vqqut5 2026-03-12 01:47:57,655 Soop found: SOOP 2026-03-12 01:47:57,655 Soop found: SOOP 2026-03-12 01:47:57,752 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/21/CAL/solo_CAL_stix-cal-energy_20251221T051443-20251222T055443_V02.fits 2026-03-12 01:47:57,920 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ijv7twx9 2026-03-12 01:47:57,920 Read config from in: /tmp/ecc_context_ecc_cfg_1_ijv7twx9/post_ecc.ini 2026-03-12 01:47:59,166 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ijv7twx9/solo_L1_stix-cal-energy_20251212_V03_ecc_in.fits 2026-03-12 01:57:31,906 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251212_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251212_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 01:57:38,172 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 01:57:38,179 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ijv7twx9 2026-03-12 01:57:38,205 Soop found: SOOP 2026-03-12 01:57:38,205 Soop found: SOOP 2026-03-12 01:57:38,301 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/12/CAL/solo_CAL_stix-cal-energy_20251212T062222-20251213T062222_V02.fits 2026-03-12 01:57:38,445 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8u7vuppj 2026-03-12 01:57:38,445 Read config from in: /tmp/ecc_context_ecc_cfg_1_8u7vuppj/post_ecc.ini 2026-03-12 01:57:41,071 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8u7vuppj/solo_L1_stix-cal-energy_20251227_V03_ecc_in.fits 2026-03-12 02:07:02,394 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251227_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251227_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 02:07:08,617 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 02:07:08,630 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8u7vuppj 2026-03-12 02:07:08,655 Soop found: SOOP 2026-03-12 02:07:08,750 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/27/CAL/solo_CAL_stix-cal-energy_20251227T080948-20251228T080947_V02.fits 2026-03-12 02:07:08,888 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s_aelwqq 2026-03-12 02:07:08,888 Read config from in: /tmp/ecc_context_ecc_cfg_1_s_aelwqq/post_ecc.ini 2026-03-12 02:07:10,123 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s_aelwqq/solo_L1_stix-cal-energy_20251211_V03_ecc_in.fits 2026-03-12 02:16:26,512 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251211_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251211_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 02:16:32,760 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 02:16:32,767 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s_aelwqq 2026-03-12 02:16:32,792 Soop found: SOOP 2026-03-12 02:16:32,792 Soop found: SOOP 2026-03-12 02:16:32,888 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/11/CAL/solo_CAL_stix-cal-energy_20251211T062217-20251212T062216_V02.fits 2026-03-12 02:16:33,027 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o8h8ex2_ 2026-03-12 02:16:33,027 Read config from in: /tmp/ecc_context_ecc_cfg_1_o8h8ex2_/post_ecc.ini 2026-03-12 02:16:34,265 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o8h8ex2_/solo_L1_stix-cal-energy_20251226_V03_ecc_in.fits 2026-03-12 02:26:00,328 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251226_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251226_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 02:26:06,676 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 02:26:06,683 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o8h8ex2_ 2026-03-12 02:26:06,710 Soop found: SOOP 2026-03-12 02:26:06,805 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/26/CAL/solo_CAL_stix-cal-energy_20251226T055513-20251227T061437_V02.fits 2026-03-12 02:26:06,944 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2gqv_n8q 2026-03-12 02:26:06,945 Read config from in: /tmp/ecc_context_ecc_cfg_1_2gqv_n8q/post_ecc.ini 2026-03-12 02:26:08,187 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2gqv_n8q/solo_L1_stix-cal-energy_20251219_V03_ecc_in.fits 2026-03-12 02:35:35,266 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251219_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251219_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 02:35:41,486 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 02:35:41,495 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2gqv_n8q 2026-03-12 02:35:41,521 Soop found: SOOP 2026-03-12 02:35:41,615 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/19/CAL/solo_CAL_stix-cal-energy_20251219T044908-20251220T044909_V02.fits 2026-03-12 02:35:41,755 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ri_36crv 2026-03-12 02:35:41,755 Read config from in: /tmp/ecc_context_ecc_cfg_1_ri_36crv/post_ecc.ini 2026-03-12 02:35:42,989 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ri_36crv/solo_L1_stix-cal-energy_20251222_V03_ecc_in.fits 2026-03-12 02:45:19,927 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251222_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251222_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 02:45:26,210 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 02:45:26,217 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ri_36crv 2026-03-12 02:45:26,243 Soop found: SOOP 2026-03-12 02:45:26,337 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/22/CAL/solo_CAL_stix-cal-energy_20251222T055449-20251223T055448_V02.fits 2026-03-12 02:45:26,481 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4v75lx5o 2026-03-12 02:45:26,481 Read config from in: /tmp/ecc_context_ecc_cfg_1_4v75lx5o/post_ecc.ini 2026-03-12 02:45:27,727 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4v75lx5o/solo_L1_stix-cal-energy_20251225_V03_ecc_in.fits 2026-03-12 02:54:42,646 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251225_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251225_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 02:54:50,434 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 02:54:50,441 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4v75lx5o 2026-03-12 02:54:50,465 Soop found: SOOP 2026-03-12 02:54:50,558 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/25/CAL/solo_CAL_stix-cal-energy_20251225T055506-20251226T055507_V02.fits 2026-03-12 02:54:50,700 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1xgoc4_c 2026-03-12 02:54:50,701 Read config from in: /tmp/ecc_context_ecc_cfg_1_1xgoc4_c/post_ecc.ini 2026-03-12 02:54:51,938 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1xgoc4_c/solo_L1_stix-cal-energy_20251228_V03_ecc_in.fits 2026-03-12 03:04:12,158 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251228_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251228_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 03:04:18,422 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 03:04:18,429 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1xgoc4_c 2026-03-12 03:04:18,454 Soop found: SOOP 2026-03-12 03:04:18,454 Soop found: SOOP 2026-03-12 03:04:18,548 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/28/CAL/solo_CAL_stix-cal-energy_20251228T080954-20251229T000002_V02.fits 2026-03-12 03:04:18,717 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bne1wp7v 2026-03-12 03:04:18,718 Read config from in: /tmp/ecc_context_ecc_cfg_1_bne1wp7v/post_ecc.ini 2026-03-12 03:04:19,954 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bne1wp7v/solo_L1_stix-cal-energy_20251209_V03_ecc_in.fits 2026-03-12 03:13:28,152 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 03:13:34,338 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 03:13:34,345 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bne1wp7v 2026-03-12 03:13:34,369 Soop found: SOOP 2026-03-12 03:13:34,465 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/09/CAL/solo_CAL_stix-cal-energy_20251209T062205-20251210T062204_V02.fits 2026-03-12 03:13:34,608 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tyh4lt9x 2026-03-12 03:13:34,608 Read config from in: /tmp/ecc_context_ecc_cfg_1_tyh4lt9x/post_ecc.ini 2026-03-12 03:13:35,848 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tyh4lt9x/solo_L1_stix-cal-energy_20251229_V03_ecc_in.fits 2026-03-12 03:23:18,813 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251229_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251229_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251229_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251229_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 03:23:25,040 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 03:23:25,048 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tyh4lt9x 2026-03-12 03:23:25,075 Soop found: SOOP 2026-03-12 03:23:25,170 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/29/CAL/solo_CAL_stix-cal-energy_20251229T002300-20251230T011525_V02.fits 2026-03-12 03:23:25,327 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_shl_hpmq 2026-03-12 03:23:25,328 Read config from in: /tmp/ecc_context_ecc_cfg_1_shl_hpmq/post_ecc.ini 2026-03-12 03:23:26,576 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_shl_hpmq/solo_L1_stix-cal-energy_20251202_V03_ecc_in.fits 2026-03-12 03:33:02,440 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251202_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251202_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 03:33:08,808 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 03:33:08,814 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_shl_hpmq 2026-03-12 03:33:08,839 Soop found: SOOP 2026-03-12 03:33:08,931 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/02/CAL/solo_CAL_stix-cal-energy_20251202T032309-20251203T033156_V02.fits 2026-03-12 03:33:09,094 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bp9ksrvz 2026-03-12 03:33:09,094 Read config from in: /tmp/ecc_context_ecc_cfg_1_bp9ksrvz/post_ecc.ini 2026-03-12 03:33:10,375 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bp9ksrvz/solo_L1_stix-cal-energy_20251213_V03_ecc_in.fits 2026-03-12 03:42:33,881 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251213_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251213_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 03:42:40,089 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 03:42:40,097 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bp9ksrvz 2026-03-12 03:42:40,123 Soop found: SOOP 2026-03-12 03:42:40,124 Soop found: SOOP 2026-03-12 03:42:40,217 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/13/CAL/solo_CAL_stix-cal-energy_20251213T062228-20251214T062229_V02.fits 2026-03-12 03:42:40,359 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rgxssgwc 2026-03-12 03:42:40,359 Read config from in: /tmp/ecc_context_ecc_cfg_1_rgxssgwc/post_ecc.ini 2026-03-12 03:42:41,603 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rgxssgwc/solo_L1_stix-cal-energy_20251215_V03_ecc_in.fits 2026-03-12 03:51:58,416 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251215_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251215_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 03:52:06,141 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 03:52:06,149 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rgxssgwc 2026-03-12 03:52:06,177 Soop found: SOOP 2026-03-12 03:52:06,275 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/15/CAL/solo_CAL_stix-cal-energy_20251215T030502-20251216T030501_V02.fits 2026-03-12 03:52:06,415 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3jwte8mx 2026-03-12 03:52:06,416 Read config from in: /tmp/ecc_context_ecc_cfg_1_3jwte8mx/post_ecc.ini 2026-03-12 03:52:07,657 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3jwte8mx/solo_L1_stix-cal-energy_20251204_V03_ecc_in.fits 2026-03-12 04:01:43,896 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251204_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251204_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 04:01:50,114 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 04:01:50,123 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3jwte8mx 2026-03-12 04:01:50,147 Soop found: SOOP 2026-03-12 04:01:50,240 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/04/CAL/solo_CAL_stix-cal-energy_20251204T050932-20251205T050932_V02.fits 2026-03-12 04:01:50,384 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_75u22bue 2026-03-12 04:01:50,385 Read config from in: /tmp/ecc_context_ecc_cfg_1_75u22bue/post_ecc.ini 2026-03-12 04:01:51,631 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_75u22bue/solo_L1_stix-cal-energy_20251130_V03_ecc_in.fits 2026-03-12 04:11:08,362 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251130_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251130_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251130_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 04:11:14,600 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 04:11:14,607 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_75u22bue 2026-03-12 04:11:14,632 Soop found: SOOP 2026-03-12 04:11:14,632 Soop found: SOOP 2026-03-12 04:11:14,632 Soop found: SOOP 2026-03-12 04:11:14,729 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/30/CAL/solo_CAL_stix-cal-energy_20251130T061204-20251201T030002_V02.fits 2026-03-12 04:11:14,865 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r6zxt4ti 2026-03-12 04:11:14,865 Read config from in: /tmp/ecc_context_ecc_cfg_1_r6zxt4ti/post_ecc.ini 2026-03-12 04:11:16,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r6zxt4ti/solo_L1_stix-cal-energy_20251110_V03_ecc_in.fits 2026-03-12 04:20:51,003 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251110_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251110_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251110_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 04:20:57,301 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 04:20:57,308 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r6zxt4ti 2026-03-12 04:20:57,334 Soop found: SOOP 2026-03-12 04:20:57,431 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/10/CAL/solo_CAL_stix-cal-energy_20251110T011620-20251110T034127_V02.fits 2026-03-12 04:20:57,570 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vt7ti47g 2026-03-12 04:20:57,571 Read config from in: /tmp/ecc_context_ecc_cfg_1_vt7ti47g/post_ecc.ini 2026-03-12 04:20:58,815 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vt7ti47g/solo_L1_stix-cal-energy_20251101_V03_ecc_in.fits 2026-03-12 04:30:36,603 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251101_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251101_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251101_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 04:30:42,875 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 04:30:42,883 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vt7ti47g 2026-03-12 04:30:42,912 Soop found: SOOP 2026-03-12 04:30:42,912 Soop found: SOOP 2026-03-12 04:30:43,014 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/01/CAL/solo_CAL_stix-cal-energy_20251101T002537-20251101T024936_V02.fits 2026-03-12 04:30:43,151 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0y1t60gd 2026-03-12 04:30:43,152 Read config from in: /tmp/ecc_context_ecc_cfg_1_0y1t60gd/post_ecc.ini 2026-03-12 04:30:44,396 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0y1t60gd/solo_L1_stix-cal-energy_20251124_V03_ecc_in.fits 2026-03-12 04:40:13,613 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251124_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251124_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251124_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 04:40:21,931 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 04:40:21,938 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0y1t60gd 2026-03-12 04:40:21,966 Soop found: SOOP 2026-03-12 04:40:21,966 Soop found: SOOP 2026-03-12 04:40:22,070 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/24/CAL/solo_CAL_stix-cal-energy_20251124T061123-20251125T061124_V02.fits 2026-03-12 04:40:22,218 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h7jkkgvr 2026-03-12 04:40:22,218 Read config from in: /tmp/ecc_context_ecc_cfg_1_h7jkkgvr/post_ecc.ini 2026-03-12 04:40:23,481 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h7jkkgvr/solo_L1_stix-cal-energy_20251108_V03_ecc_in.fits 2026-03-12 04:49:44,303 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251108_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251108_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251108_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 04:49:50,505 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 04:49:50,512 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h7jkkgvr 2026-03-12 04:49:50,537 Soop found: SOOP 2026-03-12 04:49:50,634 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/08/CAL/solo_CAL_stix-cal-energy_20251108T010945-20251108T033345_V02.fits 2026-03-12 04:49:50,773 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zu0ohfz3 2026-03-12 04:49:50,774 Read config from in: /tmp/ecc_context_ecc_cfg_1_zu0ohfz3/post_ecc.ini 2026-03-12 04:49:51,996 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zu0ohfz3/solo_L1_stix-cal-energy_20251105_V03_ecc_in.fits 2026-03-12 04:59:12,219 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251105_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251105_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251105_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 04:59:18,441 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 04:59:18,448 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zu0ohfz3 2026-03-12 04:59:18,473 Soop found: SOOP 2026-03-12 04:59:18,570 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/05/CAL/solo_CAL_stix-cal-energy_20251105T005448-20251105T031853_V02.fits 2026-03-12 04:59:18,718 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9b7nrfj_ 2026-03-12 04:59:18,718 Read config from in: /tmp/ecc_context_ecc_cfg_1_9b7nrfj_/post_ecc.ini 2026-03-12 04:59:19,949 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9b7nrfj_/solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits 2026-03-12 05:08:46,068 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 05:08:52,278 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 05:08:52,285 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9b7nrfj_ 2026-03-12 05:08:52,318 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7jn3laad 2026-03-12 05:08:52,319 Read config from in: /tmp/ecc_context_ecc_cfg_1_7jn3laad/post_ecc.ini 2026-03-12 05:08:53,564 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7jn3laad/solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits 2026-03-12 05:18:01,117 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251114_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 05:18:07,381 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 05:18:07,389 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7jn3laad 2026-03-12 05:18:07,416 Soop found: SOOP 2026-03-12 05:18:07,516 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/14/CAL/solo_CAL_stix-cal-energy_20251113T131900-20251114T131900_V02.fits 2026-03-12 05:18:07,553 Soop found: SOOP 2026-03-12 05:18:07,645 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/14/CAL/solo_CAL_stix-cal-energy_20251114T131906-20251115T000002_V02.fits 2026-03-12 05:18:07,784 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6ud3qobm 2026-03-12 05:18:07,785 Read config from in: /tmp/ecc_context_ecc_cfg_1_6ud3qobm/post_ecc.ini 2026-03-12 05:18:09,054 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6ud3qobm/solo_L1_stix-cal-energy_20251107_V03_ecc_in.fits 2026-03-12 05:27:51,477 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251107_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251107_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251107_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 05:27:57,756 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 05:27:57,763 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6ud3qobm 2026-03-12 05:27:57,790 Soop found: SOOP 2026-03-12 05:27:57,887 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/07/CAL/solo_CAL_stix-cal-energy_20251107T010652-20251107T033103_V02.fits 2026-03-12 05:27:58,025 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bcfdjjbv 2026-03-12 05:27:58,026 Read config from in: /tmp/ecc_context_ecc_cfg_1_bcfdjjbv/post_ecc.ini 2026-03-12 05:27:59,273 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bcfdjjbv/solo_L1_stix-cal-energy_20251120_V03_ecc_in.fits 2026-03-12 05:37:31,431 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251120_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251120_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251120_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 05:37:39,161 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 05:37:39,169 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bcfdjjbv 2026-03-12 05:37:39,194 Soop found: SOOP 2026-03-12 05:37:39,194 Soop found: SOOP 2026-03-12 05:37:39,291 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/20/CAL/solo_CAL_stix-cal-energy_20251120T035117-20251121T035117_V02.fits 2026-03-12 05:37:39,429 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wqte1ys3 2026-03-12 05:37:39,429 Read config from in: /tmp/ecc_context_ecc_cfg_1_wqte1ys3/post_ecc.ini 2026-03-12 05:37:40,668 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wqte1ys3/solo_L1_stix-cal-energy_20251106_V03_ecc_in.fits 2026-03-12 05:47:14,517 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251106_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251106_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251106_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 05:47:21,442 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 05:47:21,449 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wqte1ys3 2026-03-12 05:47:21,487 Soop found: SOOP 2026-03-12 05:47:21,594 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/06/CAL/solo_CAL_stix-cal-energy_20251106T010645-20251106T033045_V02.fits 2026-03-12 05:47:21,749 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w300_9cd 2026-03-12 05:47:21,750 Read config from in: /tmp/ecc_context_ecc_cfg_1_w300_9cd/post_ecc.ini 2026-03-12 05:47:23,020 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w300_9cd/solo_L1_stix-cal-energy_20251103_V03_ecc_in.fits 2026-03-12 05:56:32,256 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251103_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251103_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251103_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 05:56:38,514 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 05:56:38,523 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w300_9cd 2026-03-12 05:56:38,550 Soop found: SOOP 2026-03-12 05:56:38,649 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/03/CAL/solo_CAL_stix-cal-energy_20251103T003231-20251103T025631_V02.fits 2026-03-12 05:56:38,790 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gg4hdx3m 2026-03-12 05:56:38,791 Read config from in: /tmp/ecc_context_ecc_cfg_1_gg4hdx3m/post_ecc.ini 2026-03-12 05:56:40,046 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gg4hdx3m/solo_L1_stix-cal-energy_20251117_V03_ecc_in.fits 2026-03-12 06:06:10,881 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251117_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251117_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251117_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 06:06:17,074 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 06:06:17,081 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gg4hdx3m 2026-03-12 06:06:17,108 Soop found: SOOP 2026-03-12 06:06:17,207 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/17/CAL/solo_CAL_stix-cal-energy_20251117T031110-20251118T031115_V02.fits 2026-03-12 06:06:17,349 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kqw9tx_r 2026-03-12 06:06:17,350 Read config from in: /tmp/ecc_context_ecc_cfg_1_kqw9tx_r/post_ecc.ini 2026-03-12 06:06:18,589 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kqw9tx_r/solo_L1_stix-cal-energy_20251118_V03_ecc_in.fits 2026-03-12 06:15:37,278 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251118_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251118_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251118_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 06:15:43,516 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 06:15:43,523 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kqw9tx_r 2026-03-12 06:15:43,550 Soop found: SOOP 2026-03-12 06:15:43,646 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/18/CAL/solo_CAL_stix-cal-energy_20251118T031124-20251119T031125_V02.fits 2026-03-12 06:15:43,791 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_un_epafi 2026-03-12 06:15:43,791 Read config from in: /tmp/ecc_context_ecc_cfg_1_un_epafi/post_ecc.ini 2026-03-12 06:15:45,031 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_un_epafi/solo_L1_stix-cal-energy_20251123_V03_ecc_in.fits 2026-03-12 06:25:17,796 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251123_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251123_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251123_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 06:25:24,062 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 06:25:24,069 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_un_epafi 2026-03-12 06:25:24,095 Soop found: SOOP 2026-03-12 06:25:24,095 Soop found: SOOP 2026-03-12 06:25:24,095 Soop found: SOOP 2026-03-12 06:25:24,194 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/23/CAL/solo_CAL_stix-cal-energy_20251123T044443-20251124T044834_V02.fits 2026-03-12 06:25:24,333 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tjbvk_ov 2026-03-12 06:25:24,334 Read config from in: /tmp/ecc_context_ecc_cfg_1_tjbvk_ov/post_ecc.ini 2026-03-12 06:25:27,014 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tjbvk_ov/solo_L1_stix-cal-energy_20251116_V03_ecc_in.fits 2026-03-12 06:34:51,022 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251116_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251116_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251116_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 06:34:57,235 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 06:34:57,243 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tjbvk_ov 2026-03-12 06:34:57,270 Soop found: SOOP 2026-03-12 06:34:57,270 Soop found: SOOP 2026-03-12 06:34:57,367 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/16/CAL/solo_CAL_stix-cal-energy_20251116T000507-20251117T020522_V02.fits 2026-03-12 06:34:57,514 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xke5gjj7 2026-03-12 06:34:57,515 Read config from in: /tmp/ecc_context_ecc_cfg_1_xke5gjj7/post_ecc.ini 2026-03-12 06:34:58,745 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xke5gjj7/solo_L1_stix-cal-energy_20251121_V03_ecc_in.fits 2026-03-12 06:44:25,786 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251121_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251121_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251121_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 06:44:32,009 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 06:44:32,018 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xke5gjj7 2026-03-12 06:44:32,043 Soop found: SOOP 2026-03-12 06:44:32,044 Soop found: SOOP 2026-03-12 06:44:32,143 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/21/CAL/solo_CAL_stix-cal-energy_20251121T035123-20251122T044431_V02.fits 2026-03-12 06:44:32,284 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tgj9xy7n 2026-03-12 06:44:32,284 Read config from in: /tmp/ecc_context_ecc_cfg_1_tgj9xy7n/post_ecc.ini 2026-03-12 06:44:33,527 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tgj9xy7n/solo_L1_stix-cal-energy_20251112_V03_ecc_in.fits 2026-03-12 06:54:46,642 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251112_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251112_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251112_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 06:54:52,973 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 06:54:52,975 ECC result Gain_Prime 0.0 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 06:54:52,979 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tgj9xy7n 2026-03-12 06:54:53,005 Soop found: SOOP 2026-03-12 06:54:53,102 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/12/CAL/solo_CAL_stix-cal-energy_20251112T131854-20251112T154254_V02.fits 2026-03-12 06:54:53,243 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5_lr880q 2026-03-12 06:54:53,243 Read config from in: /tmp/ecc_context_ecc_cfg_1_5_lr880q/post_ecc.ini 2026-03-12 06:54:54,476 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5_lr880q/solo_L1_stix-cal-energy_20251127_V03_ecc_in.fits 2026-03-12 07:04:10,988 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251127_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251127_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251127_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 07:04:17,211 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 07:04:17,218 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5_lr880q 2026-03-12 07:04:17,244 Soop found: SOOP 2026-03-12 07:04:17,244 Soop found: SOOP 2026-03-12 07:04:17,339 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/27/CAL/solo_CAL_stix-cal-energy_20251127T061142-20251128T061142_V02.fits 2026-03-12 07:04:17,493 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ug1jzwrm 2026-03-12 07:04:17,493 Read config from in: /tmp/ecc_context_ecc_cfg_1_ug1jzwrm/post_ecc.ini 2026-03-12 07:04:18,731 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ug1jzwrm/solo_L1_stix-cal-energy_20251111_V03_ecc_in.fits 2026-03-12 07:18:06,348 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251111_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251111_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251111_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 07:18:14,193 Run ecc post fit: replaced [91.1 %] gain offset pairs with 'better fits' 2026-03-12 07:18:14,195 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,195 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 4 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 5 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 10 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 12 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,196 ECC result Gain_Prime 0.0 for DET 14 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 14 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 17 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 17 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 18 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 19 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 20 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 20 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,197 ECC result Gain_Prime 0.0 for DET 20 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 20 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 24 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 25 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 26 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 28 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 29 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 30 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,198 ECC result Gain_Prime 0.0 for DET 31 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,199 ECC result Gain_Prime 0.0 for DET 31 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,199 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 07:18:14,205 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ug1jzwrm 2026-03-12 07:18:14,236 Soop found: SOOP 2026-03-12 07:18:14,334 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/11/CAL/solo_CAL_stix-cal-energy_20251111T021644-20251111T054500_V02.fits 2026-03-12 07:18:14,474 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s9z_892y 2026-03-12 07:18:14,475 Read config from in: /tmp/ecc_context_ecc_cfg_1_s9z_892y/post_ecc.ini 2026-03-12 07:18:15,720 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s9z_892y/solo_L1_stix-cal-energy_20251126_V03_ecc_in.fits 2026-03-12 07:27:41,202 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251126_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251126_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251126_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 07:27:48,764 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 07:27:48,771 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s9z_892y 2026-03-12 07:27:48,795 Soop found: SOOP 2026-03-12 07:27:48,795 Soop found: SOOP 2026-03-12 07:27:48,889 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/26/CAL/solo_CAL_stix-cal-energy_20251126T061136-20251127T061136_V02.fits 2026-03-12 07:27:49,026 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c96mbk9r 2026-03-12 07:27:49,026 Read config from in: /tmp/ecc_context_ecc_cfg_1_c96mbk9r/post_ecc.ini 2026-03-12 07:27:50,285 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c96mbk9r/solo_L1_stix-cal-energy_20251119_V03_ecc_in.fits 2026-03-12 07:37:05,429 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251119_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251119_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251119_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 07:37:11,650 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 07:37:11,657 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c96mbk9r 2026-03-12 07:37:11,682 Soop found: SOOP 2026-03-12 07:37:11,683 Soop found: SOOP 2026-03-12 07:37:11,777 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/19/CAL/solo_CAL_stix-cal-energy_20251119T031131-20251120T032036_V02.fits 2026-03-12 07:37:11,938 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iu4802l2 2026-03-12 07:37:11,939 Read config from in: /tmp/ecc_context_ecc_cfg_1_iu4802l2/post_ecc.ini 2026-03-12 07:37:13,180 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iu4802l2/solo_L1_stix-cal-energy_20251122_V03_ecc_in.fits 2026-03-12 07:46:55,381 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251122_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251122_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251122_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 07:47:01,572 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 07:47:01,579 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_iu4802l2 2026-03-12 07:47:01,604 Soop found: SOOP 2026-03-12 07:47:01,604 Soop found: SOOP 2026-03-12 07:47:01,698 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/22/CAL/solo_CAL_stix-cal-energy_20251122T044436-20251123T044436_V02.fits 2026-03-12 07:47:01,836 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y7yu4rhr 2026-03-12 07:47:01,837 Read config from in: /tmp/ecc_context_ecc_cfg_1_y7yu4rhr/post_ecc.ini 2026-03-12 07:47:03,074 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y7yu4rhr/solo_L1_stix-cal-energy_20251125_V03_ecc_in.fits 2026-03-12 07:56:31,857 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251125_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251125_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251125_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 07:56:38,130 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 07:56:38,137 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y7yu4rhr 2026-03-12 07:56:38,163 Soop found: SOOP 2026-03-12 07:56:38,163 Soop found: SOOP 2026-03-12 07:56:38,260 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/25/CAL/solo_CAL_stix-cal-energy_20251125T061131-20251126T061130_V02.fits 2026-03-12 07:56:38,418 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vbp7890i 2026-03-12 07:56:38,419 Read config from in: /tmp/ecc_context_ecc_cfg_1_vbp7890i/post_ecc.ini 2026-03-12 07:56:39,673 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vbp7890i/solo_L1_stix-cal-energy_20251128_V03_ecc_in.fits 2026-03-12 08:05:58,446 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251128_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251128_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251128_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 08:06:04,733 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 08:06:04,742 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vbp7890i 2026-03-12 08:06:04,768 Soop found: SOOP 2026-03-12 08:06:04,768 Soop found: SOOP 2026-03-12 08:06:04,861 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/28/CAL/solo_CAL_stix-cal-energy_20251128T061148-20251129T061148_V02.fits 2026-03-12 08:06:04,996 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7ijv9y7v 2026-03-12 08:06:04,996 Read config from in: /tmp/ecc_context_ecc_cfg_1_7ijv9y7v/post_ecc.ini 2026-03-12 08:06:06,242 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7ijv9y7v/solo_L1_stix-cal-energy_20251109_V03_ecc_in.fits 2026-03-12 08:15:20,226 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251109_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251109_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251109_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 08:15:26,475 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 08:15:26,483 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7ijv9y7v 2026-03-12 08:15:26,509 Soop found: SOOP 2026-03-12 08:15:26,602 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/09/CAL/solo_CAL_stix-cal-energy_20251109T010951-20251109T033429_V02.fits 2026-03-12 08:15:26,740 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x8huvwpr 2026-03-12 08:15:26,740 Read config from in: /tmp/ecc_context_ecc_cfg_1_x8huvwpr/post_ecc.ini 2026-03-12 08:15:27,989 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x8huvwpr/solo_L1_stix-cal-energy_20251129_V03_ecc_in.fits 2026-03-12 08:24:50,549 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251129_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251129_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251129_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 08:24:58,217 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 08:24:58,224 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x8huvwpr 2026-03-12 08:24:58,249 Soop found: SOOP 2026-03-12 08:24:58,249 Soop found: SOOP 2026-03-12 08:24:58,341 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/29/CAL/solo_CAL_stix-cal-energy_20251129T061154-20251130T061154_V02.fits 2026-03-12 08:24:58,493 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a39mz_uk 2026-03-12 08:24:58,494 Read config from in: /tmp/ecc_context_ecc_cfg_1_a39mz_uk/post_ecc.ini 2026-03-12 08:24:59,733 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a39mz_uk/solo_L1_stix-cal-energy_20251102_V03_ecc_in.fits 2026-03-12 08:34:24,602 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251102_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251102_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251102_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 08:34:30,810 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 08:34:30,817 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a39mz_uk 2026-03-12 08:34:30,842 Soop found: SOOP 2026-03-12 08:34:30,938 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/02/CAL/solo_CAL_stix-cal-energy_20251102T002543-20251102T025000_V02.fits 2026-03-12 08:34:31,074 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hy88gssg 2026-03-12 08:34:31,074 Read config from in: /tmp/ecc_context_ecc_cfg_1_hy88gssg/post_ecc.ini 2026-03-12 08:34:32,318 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hy88gssg/solo_L1_stix-cal-energy_20251113_V03_ecc_in.fits 2026-03-12 08:43:58,247 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251113_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251113_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251113_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 08:44:04,473 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 08:44:04,484 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hy88gssg 2026-03-12 08:44:04,511 Soop found: SOOP 2026-03-12 08:44:04,606 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/13/CAL/solo_CAL_stix-cal-energy_20251113T131900-20251113T154300_V02.fits 2026-03-12 08:44:04,747 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5xasii4i 2026-03-12 08:44:04,748 Read config from in: /tmp/ecc_context_ecc_cfg_1_5xasii4i/post_ecc.ini 2026-03-12 08:44:05,997 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5xasii4i/solo_L1_stix-cal-energy_20251115_V03_ecc_in.fits 2026-03-12 08:53:31,617 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251115_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251115_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251115_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 08:53:37,822 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 08:53:37,829 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5xasii4i 2026-03-12 08:53:37,855 Soop found: SOOP 2026-03-12 08:53:37,949 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/15/CAL/solo_CAL_stix-cal-energy_20251115T000501-20251116T000501_V02.fits 2026-03-12 08:53:38,085 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r34bjwbj 2026-03-12 08:53:38,086 Read config from in: /tmp/ecc_context_ecc_cfg_1_r34bjwbj/post_ecc.ini 2026-03-12 08:53:39,325 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r34bjwbj/solo_L1_stix-cal-energy_20251104_V03_ecc_in.fits 2026-03-12 09:03:02,759 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251104_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251104_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251104_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 09:03:08,989 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 09:03:08,996 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r34bjwbj 2026-03-12 09:03:09,022 Soop found: SOOP 2026-03-12 09:03:09,119 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/04/CAL/solo_CAL_stix-cal-energy_20251104T003240-20251104T025705_V02.fits 2026-03-12 09:03:09,275 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vucy5b8m 2026-03-12 09:03:09,275 Read config from in: /tmp/ecc_context_ecc_cfg_1_vucy5b8m/post_ecc.ini 2026-03-12 09:03:10,533 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vucy5b8m/solo_L1_stix-cal-energy_20250930_V03_ecc_in.fits 2026-03-12 09:13:40,013 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250930_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250930_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250930_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250930_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 09:13:47,672 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 09:13:47,679 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vucy5b8m 2026-03-12 09:13:47,703 Soop found: SOOP 2026-03-12 09:13:47,800 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/30/CAL/solo_CAL_stix-cal-energy_20250930T010730-20250930T033130_V02.fits 2026-03-12 09:13:47,935 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x7n6vg75 2026-03-12 09:13:47,935 Read config from in: /tmp/ecc_context_ecc_cfg_1_x7n6vg75/post_ecc.ini 2026-03-12 09:13:49,167 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x7n6vg75/solo_L1_stix-cal-energy_20250910_V03_ecc_in.fits 2026-03-12 09:23:16,125 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250910_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250910_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250910_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250910_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 09:23:22,349 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 09:23:22,356 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x7n6vg75 2026-03-12 09:23:22,381 Soop found: SOOP 2026-03-12 09:23:22,479 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/10/CAL/solo_CAL_stix-cal-energy_20250910T103751-20250910T115804_V02.fits 2026-03-12 09:23:22,617 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_49ob5cg0 2026-03-12 09:23:22,617 Read config from in: /tmp/ecc_context_ecc_cfg_1_49ob5cg0/post_ecc.ini 2026-03-12 09:23:23,852 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_49ob5cg0/solo_L1_stix-cal-energy_20250901_V03_ecc_in.fits 2026-03-12 09:33:04,239 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250901_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250901_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250901_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250901_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 09:33:10,438 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 09:33:10,444 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_49ob5cg0 2026-03-12 09:33:10,469 Soop found: SOOP 2026-03-12 09:33:10,566 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/01/CAL/solo_CAL_stix-cal-energy_20250901T024259-20250901T050658_V02.fits 2026-03-12 09:33:10,719 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kweyruuu 2026-03-12 09:33:10,719 Read config from in: /tmp/ecc_context_ecc_cfg_1_kweyruuu/post_ecc.ini 2026-03-12 09:33:11,958 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kweyruuu/solo_L1_stix-cal-energy_20250924_V03_ecc_in.fits 2026-03-12 09:42:43,551 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250924_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250924_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250924_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250924_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 09:42:50,533 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 09:42:50,541 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kweyruuu 2026-03-12 09:42:50,568 Soop found: SOOP 2026-03-12 09:42:50,568 Soop found: SOOP 2026-03-12 09:42:50,672 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/24/CAL/solo_CAL_stix-cal-energy_20250924T011547-20250924T033948_V02.fits 2026-03-12 09:42:50,817 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__pk84hup 2026-03-12 09:42:50,817 Read config from in: /tmp/ecc_context_ecc_cfg_1__pk84hup/post_ecc.ini 2026-03-12 09:42:52,092 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__pk84hup/solo_L1_stix-cal-energy_20250908_V03_ecc_in.fits 2026-03-12 09:52:05,038 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250908_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250908_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250908_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250908_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 09:52:11,232 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 09:52:11,239 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__pk84hup 2026-03-12 09:52:11,264 Soop found: SOOP 2026-03-12 09:52:11,361 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/08/CAL/solo_CAL_stix-cal-energy_20250908T103738-20250908T130138_V02.fits 2026-03-12 09:52:11,497 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ga7jo3eh 2026-03-12 09:52:11,498 Read config from in: /tmp/ecc_context_ecc_cfg_1_ga7jo3eh/post_ecc.ini 2026-03-12 09:52:12,747 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ga7jo3eh/solo_L1_stix-cal-energy_20250905_V03_ecc_in.fits 2026-03-12 10:01:56,315 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250905_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250905_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250905_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250905_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 10:02:02,628 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 10:02:02,635 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ga7jo3eh 2026-03-12 10:02:02,662 No soops found for time: 2025-09-05 05:40:46.881528 - 2025-09-05 08:04:45.897822 2026-03-12 10:02:02,762 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/05/CAL/solo_CAL_stix-cal-energy_20250905T054046-20250905T080445_V02.fits 2026-03-12 10:02:02,919 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h8cde644 2026-03-12 10:02:02,920 Read config from in: /tmp/ecc_context_ecc_cfg_1_h8cde644/post_ecc.ini 2026-03-12 10:02:04,185 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h8cde644/solo_L1_stix-cal-energy_20250914_V03_ecc_in.fits 2026-03-12 10:12:27,812 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250914_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250914_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250914_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250914_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 10:12:35,593 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 10:12:35,599 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h8cde644 2026-03-12 10:12:35,625 Soop found: SOOP 2026-03-12 10:12:35,723 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/14/CAL/solo_CAL_stix-cal-energy_20250914T005615-20250914T032015_V02.fits 2026-03-12 10:12:35,864 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ovutdgx0 2026-03-12 10:12:35,865 Read config from in: /tmp/ecc_context_ecc_cfg_1_ovutdgx0/post_ecc.ini 2026-03-12 10:12:37,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ovutdgx0/solo_L1_stix-cal-energy_20250907_V03_ecc_in.fits 2026-03-12 10:21:53,642 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250907_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250907_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250907_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250907_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 10:21:59,902 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 10:21:59,909 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ovutdgx0 2026-03-12 10:21:59,934 Soop found: SOOP 2026-03-12 10:21:59,934 Soop found: SOOP 2026-03-12 10:22:00,033 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/07/CAL/solo_CAL_stix-cal-energy_20250907T054059-20250907T083437_V02.fits 2026-03-12 10:22:00,186 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jf2nowz0 2026-03-12 10:22:00,186 Read config from in: /tmp/ecc_context_ecc_cfg_1_jf2nowz0/post_ecc.ini 2026-03-12 10:22:01,437 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jf2nowz0/solo_L1_stix-cal-energy_20250920_V03_ecc_in.fits 2026-03-12 10:32:18,063 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250920_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250920_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250920_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250920_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 10:32:25,375 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 10:32:25,383 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jf2nowz0 2026-03-12 10:32:25,416 Soop found: SOOP 2026-03-12 10:32:25,416 Soop found: SOOP 2026-03-12 10:32:25,515 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/20/CAL/solo_CAL_stix-cal-energy_20250920T000725-20250920T023125_V02.fits 2026-03-12 10:32:25,671 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qx8nwbzx 2026-03-12 10:32:25,671 Read config from in: /tmp/ecc_context_ecc_cfg_1_qx8nwbzx/post_ecc.ini 2026-03-12 10:32:26,911 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qx8nwbzx/solo_L1_stix-cal-energy_20250906_V03_ecc_in.fits 2026-03-12 10:41:40,460 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250906_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250906_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250906_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250906_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 10:41:46,723 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 10:41:46,734 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qx8nwbzx 2026-03-12 10:41:46,760 Soop found: SOOP 2026-03-12 10:41:46,858 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/06/CAL/solo_CAL_stix-cal-energy_20250906T054053-20250906T080453_V02.fits 2026-03-12 10:41:46,996 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yt6o7qbx 2026-03-12 10:41:46,997 Read config from in: /tmp/ecc_context_ecc_cfg_1_yt6o7qbx/post_ecc.ini 2026-03-12 10:41:48,241 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yt6o7qbx/solo_L1_stix-cal-energy_20250903_V03_ecc_in.fits 2026-03-12 10:51:49,454 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250903_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250903_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250903_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250903_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 10:51:56,124 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 10:51:56,131 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yt6o7qbx 2026-03-12 10:51:56,157 Soop found: SOOP 2026-03-12 10:51:56,252 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/03/CAL/solo_CAL_stix-cal-energy_20250903T024311-20250903T051012_V02.fits 2026-03-12 10:51:56,408 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_aw9a25yb 2026-03-12 10:51:56,408 Read config from in: /tmp/ecc_context_ecc_cfg_1_aw9a25yb/post_ecc.ini 2026-03-12 10:51:57,652 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_aw9a25yb/solo_L1_stix-cal-energy_20250917_V03_ecc_in.fits 2026-03-12 11:02:21,992 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250917_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250917_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250917_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250917_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 11:02:28,190 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 11:02:28,197 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_aw9a25yb 2026-03-12 11:02:28,223 No soops found for time: 2025-09-17 01:04:17.831757 - 2025-09-17 03:29:48.848498 2026-03-12 11:02:28,323 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/17/CAL/solo_CAL_stix-cal-energy_20250917T010417-20250917T032948_V02.fits 2026-03-12 11:02:28,462 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_210upd5b 2026-03-12 11:02:28,463 Read config from in: /tmp/ecc_context_ecc_cfg_1_210upd5b/post_ecc.ini 2026-03-12 11:02:29,707 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_210upd5b/solo_L1_stix-cal-energy_20250918_V03_ecc_in.fits 2026-03-12 11:12:57,053 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250918_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250918_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250918_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250918_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 11:13:04,995 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 11:13:05,003 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_210upd5b 2026-03-12 11:13:05,029 No soops found for time: 2025-09-18 01:20:07.999243 - 2025-09-18 03:44:08.015810 2026-03-12 11:13:05,127 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/18/CAL/solo_CAL_stix-cal-energy_20250918T012007-20250918T034408_V02.fits 2026-03-12 11:13:05,294 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kfi0b_jd 2026-03-12 11:13:05,294 Read config from in: /tmp/ecc_context_ecc_cfg_1_kfi0b_jd/post_ecc.ini 2026-03-12 11:13:06,544 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kfi0b_jd/solo_L1_stix-cal-energy_20250923_V03_ecc_in.fits 2026-03-12 11:22:38,913 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250923_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250923_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250923_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250923_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 11:22:45,113 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 11:22:45,121 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kfi0b_jd 2026-03-12 11:22:45,146 Soop found: SOOP 2026-03-12 11:22:45,146 Soop found: SOOP 2026-03-12 11:22:45,244 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/23/CAL/solo_CAL_stix-cal-energy_20250923T011541-20250923T033941_V02.fits 2026-03-12 11:22:45,379 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v6jit03y 2026-03-12 11:22:45,380 Read config from in: /tmp/ecc_context_ecc_cfg_1_v6jit03y/post_ecc.ini 2026-03-12 11:22:46,605 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v6jit03y/solo_L1_stix-cal-energy_20250916_V03_ecc_in.fits 2026-03-12 11:33:04,211 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250916_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250916_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250916_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250916_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 11:33:10,407 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 11:33:10,413 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v6jit03y 2026-03-12 11:33:10,439 Soop found: SOOP 2026-03-12 11:33:10,533 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/16/CAL/solo_CAL_stix-cal-energy_20250916T005627-20250916T032043_V02.fits 2026-03-12 11:33:10,688 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ma3_h850 2026-03-12 11:33:10,688 Read config from in: /tmp/ecc_context_ecc_cfg_1_ma3_h850/post_ecc.ini 2026-03-12 11:33:11,933 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ma3_h850/solo_L1_stix-cal-energy_20250921_V03_ecc_in.fits 2026-03-12 11:43:12,730 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250921_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250921_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250921_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250921_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 11:43:18,927 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-03-12 11:43:18,933 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ma3_h850 2026-03-12 11:43:18,959 Soop found: SOOP 2026-03-12 11:43:18,959 Soop found: SOOP 2026-03-12 11:43:19,056 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/21/CAL/solo_CAL_stix-cal-energy_20250921T000731-20250921T023132_V02.fits 2026-03-12 11:43:19,191 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fewwxrri 2026-03-12 11:43:19,192 Read config from in: /tmp/ecc_context_ecc_cfg_1_fewwxrri/post_ecc.ini 2026-03-12 11:43:20,436 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fewwxrri/solo_L1_stix-cal-energy_20250912_V03_ecc_in.fits 2026-03-12 11:53:29,252 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250912_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250912_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250912_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250912_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 11:53:35,552 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 11:53:35,559 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fewwxrri 2026-03-12 11:53:35,585 Soop found: SOOP 2026-03-12 11:53:35,685 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/12/CAL/solo_CAL_stix-cal-energy_20250912T000507-20250912T023207_V02.fits 2026-03-12 11:53:35,849 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b6lbg2p9 2026-03-12 11:53:35,850 Read config from in: /tmp/ecc_context_ecc_cfg_1_b6lbg2p9/post_ecc.ini 2026-03-12 11:53:37,114 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b6lbg2p9/solo_L1_stix-cal-energy_20250927_V03_ecc_in.fits 2026-03-12 12:03:29,433 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250927_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250927_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250927_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250927_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 12:03:35,739 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 12:03:35,746 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b6lbg2p9 2026-03-12 12:03:35,776 Soop found: SOOP 2026-03-12 12:03:35,776 Soop found: SOOP 2026-03-12 12:03:35,873 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/27/CAL/solo_CAL_stix-cal-energy_20250927T062902-20250927T085302_V02.fits 2026-03-12 12:03:36,029 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1fren9ya 2026-03-12 12:03:36,030 Read config from in: /tmp/ecc_context_ecc_cfg_1_1fren9ya/post_ecc.ini 2026-03-12 12:03:38,674 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1fren9ya/solo_L1_stix-cal-energy_20250911_V03_ecc_in.fits 2026-03-12 12:13:35,102 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250911_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250911_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250911_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250911_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 12:13:41,360 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 12:13:41,368 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1fren9ya 2026-03-12 12:13:41,395 Soop found: SOOP 2026-03-12 12:13:41,495 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/11/CAL/solo_CAL_stix-cal-energy_20250911T000501-20250911T022901_V02.fits 2026-03-12 12:13:41,663 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ivnww8_j 2026-03-12 12:13:41,663 Read config from in: /tmp/ecc_context_ecc_cfg_1_ivnww8_j/post_ecc.ini 2026-03-12 12:13:42,902 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ivnww8_j/solo_L1_stix-cal-energy_20250926_V03_ecc_in.fits 2026-03-12 12:23:09,329 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250926_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250926_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250926_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250926_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 12:23:15,538 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 12:23:15,545 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ivnww8_j 2026-03-12 12:23:15,571 Soop found: SOOP 2026-03-12 12:23:15,571 Soop found: SOOP 2026-03-12 12:23:15,667 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/26/CAL/solo_CAL_stix-cal-energy_20250926T011603-20250926T035244_V02.fits 2026-03-12 12:23:15,821 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_07ec4gqz 2026-03-12 12:23:15,822 Read config from in: /tmp/ecc_context_ecc_cfg_1_07ec4gqz/post_ecc.ini 2026-03-12 12:23:17,060 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_07ec4gqz/solo_L1_stix-cal-energy_20250919_V03_ecc_in.fits 2026-03-12 12:33:46,923 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250919_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250919_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250919_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250919_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 12:33:53,198 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 12:33:53,204 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_07ec4gqz 2026-03-12 12:33:53,231 Soop found: SOOP 2026-03-12 12:33:53,231 Soop found: SOOP 2026-03-12 12:33:53,326 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/19/CAL/solo_CAL_stix-cal-energy_20250919T012015-20250919T033613_V02.fits 2026-03-12 12:33:53,487 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qzhuy1cp 2026-03-12 12:33:53,487 Read config from in: /tmp/ecc_context_ecc_cfg_1_qzhuy1cp/post_ecc.ini 2026-03-12 12:33:54,720 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qzhuy1cp/solo_L1_stix-cal-energy_20250922_V03_ecc_in.fits 2026-03-12 12:43:36,431 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250922_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250922_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250922_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250922_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 12:43:42,629 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 12:43:42,635 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qzhuy1cp 2026-03-12 12:43:42,661 Soop found: SOOP 2026-03-12 12:43:42,662 Soop found: SOOP 2026-03-12 12:43:42,755 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/22/CAL/solo_CAL_stix-cal-energy_20250922T011535-20250922T033935_V02.fits 2026-03-12 12:43:42,910 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qk63kzor 2026-03-12 12:43:42,910 Read config from in: /tmp/ecc_context_ecc_cfg_1_qk63kzor/post_ecc.ini 2026-03-12 12:43:44,154 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qk63kzor/solo_L1_stix-cal-energy_20250925_V03_ecc_in.fits 2026-03-12 12:53:00,991 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250925_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250925_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250925_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250925_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 12:53:07,254 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 12:53:07,261 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qk63kzor 2026-03-12 12:53:07,286 Soop found: SOOP 2026-03-12 12:53:07,381 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/25/CAL/solo_CAL_stix-cal-energy_20250925T011557-20250925T033957_V02.fits 2026-03-12 12:53:07,541 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s2b7pog1 2026-03-12 12:53:07,541 Read config from in: /tmp/ecc_context_ecc_cfg_1_s2b7pog1/post_ecc.ini 2026-03-12 12:53:08,789 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s2b7pog1/solo_L1_stix-cal-energy_20250928_V03_ecc_in.fits 2026-03-12 13:02:49,297 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250928_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250928_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250928_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250928_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 13:02:57,039 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 13:02:57,041 ECC result Gain_Prime 0.0 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 13:02:57,047 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s2b7pog1 2026-03-12 13:02:57,071 Soop found: SOOP 2026-03-12 13:02:57,072 Soop found: SOOP 2026-03-12 13:02:57,166 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/28/CAL/solo_CAL_stix-cal-energy_20250928T062908-20250928T081413_V02.fits 2026-03-12 13:02:57,329 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kgbe73il 2026-03-12 13:02:57,330 Read config from in: /tmp/ecc_context_ecc_cfg_1_kgbe73il/post_ecc.ini 2026-03-12 13:02:58,564 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kgbe73il/solo_L1_stix-cal-energy_20250909_V03_ecc_in.fits 2026-03-12 13:12:31,296 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250909_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250909_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250909_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250909_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 13:12:37,525 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 13:12:37,531 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kgbe73il 2026-03-12 13:12:37,557 Soop found: SOOP 2026-03-12 13:12:37,657 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/09/CAL/solo_CAL_stix-cal-energy_20250909T103744-20250909T130144_V02.fits 2026-03-12 13:12:37,813 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r965rxt5 2026-03-12 13:12:37,813 Read config from in: /tmp/ecc_context_ecc_cfg_1_r965rxt5/post_ecc.ini 2026-03-12 13:12:39,052 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r965rxt5/solo_L1_stix-cal-energy_20250929_V03_ecc_in.fits 2026-03-12 13:22:32,417 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250929_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250929_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250929_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250929_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 13:22:38,919 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 13:22:38,926 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r965rxt5 2026-03-12 13:22:38,951 Soop found: SOOP 2026-03-12 13:22:38,951 Soop found: SOOP 2026-03-12 13:22:39,045 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/29/CAL/solo_CAL_stix-cal-energy_20250929T002300-20250929T025126_V02.fits 2026-03-12 13:22:39,201 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5b0ri189 2026-03-12 13:22:39,201 Read config from in: /tmp/ecc_context_ecc_cfg_1_5b0ri189/post_ecc.ini 2026-03-12 13:22:40,444 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5b0ri189/solo_L1_stix-cal-energy_20250902_V03_ecc_in.fits 2026-03-12 13:32:26,450 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250902_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250902_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250902_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250902_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 13:32:32,728 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 13:32:32,734 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5b0ri189 2026-03-12 13:32:32,760 Soop found: SOOP 2026-03-12 13:32:32,857 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/02/CAL/solo_CAL_stix-cal-energy_20250902T024304-20250902T050704_V02.fits 2026-03-12 13:32:33,015 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3w6iun4l 2026-03-12 13:32:33,016 Read config from in: /tmp/ecc_context_ecc_cfg_1_3w6iun4l/post_ecc.ini 2026-03-12 13:32:34,262 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3w6iun4l/solo_L1_stix-cal-energy_20250913_V03_ecc_in.fits 2026-03-12 13:43:02,485 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250913_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250913_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250913_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250913_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 13:43:08,904 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 13:43:08,912 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3w6iun4l 2026-03-12 13:43:08,940 No soops found for time: 2025-09-13 00:56:09.168163 - 2025-09-13 03:20:09.184730 2026-03-12 13:43:09,039 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/13/CAL/solo_CAL_stix-cal-energy_20250913T005609-20250913T032009_V02.fits 2026-03-12 13:43:09,197 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0v_n642_ 2026-03-12 13:43:09,197 Read config from in: /tmp/ecc_context_ecc_cfg_1_0v_n642_/post_ecc.ini 2026-03-12 13:43:10,452 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0v_n642_/solo_L1_stix-cal-energy_20250915_V03_ecc_in.fits 2026-03-12 13:53:21,776 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250915_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250915_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250915_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250915_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 13:53:28,177 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 13:53:28,185 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0v_n642_ 2026-03-12 13:53:28,212 Soop found: SOOP 2026-03-12 13:53:28,312 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/15/CAL/solo_CAL_stix-cal-energy_20250915T005621-20250915T032021_V02.fits 2026-03-12 13:53:28,467 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nn70gdsb 2026-03-12 13:53:28,468 Read config from in: /tmp/ecc_context_ecc_cfg_1_nn70gdsb/post_ecc.ini 2026-03-12 13:53:31,059 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nn70gdsb/solo_L1_stix-cal-energy_20250904_V03_ecc_in.fits 2026-03-12 14:03:20,378 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250904_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250904_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250904_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250904_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 14:03:26,622 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 14:03:26,629 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nn70gdsb 2026-03-12 14:03:26,653 Soop found: SOOP 2026-03-12 14:03:26,746 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/04/CAL/solo_CAL_stix-cal-energy_20250904T054040-20250904T080440_V02.fits 2026-03-12 14:03:26,899 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zd9fkg59 2026-03-12 14:03:26,899 Read config from in: /tmp/ecc_context_ecc_cfg_1_zd9fkg59/post_ecc.ini 2026-03-12 14:03:28,134 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zd9fkg59/solo_L1_stix-cal-energy_20250210_V03_ecc_in.fits 2026-03-12 14:13:26,395 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250210_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250210_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250210_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 14:13:32,694 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 14:13:32,702 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zd9fkg59 2026-03-12 14:13:32,730 Soop found: SOOP 2026-03-12 14:13:32,826 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/10/CAL/solo_CAL_stix-cal-energy_20250210T015953-20250210T042353_V02.fits 2026-03-12 14:13:32,994 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9334ojqk 2026-03-12 14:13:32,995 Read config from in: /tmp/ecc_context_ecc_cfg_1_9334ojqk/post_ecc.ini 2026-03-12 14:13:34,241 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9334ojqk/solo_L1_stix-cal-energy_20250201_V03_ecc_in.fits 2026-03-12 14:23:38,299 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250201_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250201_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250201_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 14:23:44,583 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 14:23:44,590 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9334ojqk 2026-03-12 14:23:44,618 Soop found: SOOP 2026-03-12 14:23:44,715 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/01/CAL/solo_CAL_stix-cal-energy_20250201T062624-20250201T085024_V02.fits 2026-03-12 14:23:44,877 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_67w0ymy8 2026-03-12 14:23:44,877 Read config from in: /tmp/ecc_context_ecc_cfg_1_67w0ymy8/post_ecc.ini 2026-03-12 14:23:46,118 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_67w0ymy8/solo_L1_stix-cal-energy_20250224_V03_ecc_in.fits 2026-03-12 14:33:01,943 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250224_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250224_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250224_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 14:33:08,202 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 14:33:08,209 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_67w0ymy8 2026-03-12 14:33:08,236 Soop found: SOOP 2026-03-12 14:33:08,339 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/24/CAL/solo_CAL_stix-cal-energy_20250223T230428-20250224T012828_V02.fits 2026-03-12 14:33:08,481 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f5deg6ss 2026-03-12 14:33:08,482 Read config from in: /tmp/ecc_context_ecc_cfg_1_f5deg6ss/post_ecc.ini 2026-03-12 14:33:09,728 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f5deg6ss/solo_L1_stix-cal-energy_20250208_V03_ecc_in.fits 2026-03-12 14:42:47,078 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250208_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250208_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250208_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 14:42:53,425 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 14:42:53,435 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f5deg6ss 2026-03-12 14:42:53,462 Soop found: SOOP 2026-03-12 14:42:53,561 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/08/CAL/solo_CAL_stix-cal-energy_20250208T004758-20250208T031157_V02.fits 2026-03-12 14:42:53,729 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w42crisx 2026-03-12 14:42:53,729 Read config from in: /tmp/ecc_context_ecc_cfg_1_w42crisx/post_ecc.ini 2026-03-12 14:42:54,986 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w42crisx/solo_L1_stix-cal-energy_20250205_V03_ecc_in.fits 2026-03-12 14:52:35,713 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250205_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250205_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250205_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 14:52:43,647 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 14:52:43,654 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w42crisx 2026-03-12 14:52:43,678 Soop found: SOOP 2026-03-12 14:52:43,773 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/05/CAL/solo_CAL_stix-cal-energy_20250205T004738-20250205T031138_V02.fits 2026-03-12 14:52:43,931 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kqfe8w27 2026-03-12 14:52:43,932 Read config from in: /tmp/ecc_context_ecc_cfg_1_kqfe8w27/post_ecc.ini 2026-03-12 14:52:45,170 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kqfe8w27/solo_L1_stix-cal-energy_20250214_V03_ecc_in.fits 2026-03-12 15:01:59,702 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250214_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250214_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250214_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 15:02:05,948 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 15:02:05,954 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kqfe8w27 2026-03-12 15:02:05,980 Soop found: SOOP 2026-03-12 15:02:06,076 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/14/CAL/solo_CAL_stix-cal-energy_20250214T023155-20250214T045610_V02.fits 2026-03-12 15:02:06,232 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lan4ig04 2026-03-12 15:02:06,232 Read config from in: /tmp/ecc_context_ecc_cfg_1_lan4ig04/post_ecc.ini 2026-03-12 15:02:07,473 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lan4ig04/solo_L1_stix-cal-energy_20250207_V03_ecc_in.fits 2026-03-12 15:11:50,293 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250207_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250207_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250207_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 15:11:56,618 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 15:11:56,626 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lan4ig04 2026-03-12 15:11:56,652 Soop found: SOOP 2026-03-12 15:11:56,748 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/07/CAL/solo_CAL_stix-cal-energy_20250207T004751-20250207T031151_V02.fits 2026-03-12 15:11:56,911 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q05iamdk 2026-03-12 15:11:56,912 Read config from in: /tmp/ecc_context_ecc_cfg_1_q05iamdk/post_ecc.ini 2026-03-12 15:11:58,151 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q05iamdk/solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits 2026-03-12 15:21:21,277 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 15:21:27,542 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 15:21:27,549 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q05iamdk 2026-03-12 15:21:27,582 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_modn1sxk 2026-03-12 15:21:27,582 Read config from in: /tmp/ecc_context_ecc_cfg_1_modn1sxk/post_ecc.ini 2026-03-12 15:21:28,840 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_modn1sxk/solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits 2026-03-12 15:26:55,842 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250220_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 15:28:08,885 Run ecc post fit: replaced [74.7 %] gain offset pairs with 'better fits' 2026-03-12 15:28:08,887 ECC result Gain_Prime 1.6022970805828656 for DET 4 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 15:28:08,888 ECC result Gain_Prime 1.6152522932999207 for DET 8 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 15:28:08,888 ECC result Gain_Prime 1.6152522932999207 for DET 10 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 15:28:08,888 ECC result Gain_Prime 1.6029081892809132 for DET 17 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 15:28:08,888 ECC result Gain_Prime 1.6016834861306815 for DET 22 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 15:28:08,888 ECC result Gain_Prime 1.6152522932999207 for DET 23 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 15:28:08,888 ECC result Gain_Prime 1.6112640008178838 for DET 24 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 15:28:08,888 ECC result Gain_Prime 1.6099929043619046 for DET 25 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 2 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 2 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 3 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 3 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 4 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,889 ECC result Gain_Prime 0.0 for DET 5 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 5 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 5 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 6 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 7 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 7 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 7 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,890 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 9 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 9 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 9 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 9 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 10 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 10 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 11 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 11 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,891 ECC result Gain_Prime 0.0 for DET 11 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 13 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 13 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 14 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 15 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 15 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 15 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 15 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,892 ECC result Gain_Prime 0.0 for DET 16 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 16 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 17 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 17 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 18 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 18 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 18 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 19 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 19 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,893 ECC result Gain_Prime 0.0 for DET 19 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 19 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 19 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 20 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 20 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 20 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 21 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 21 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 21 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,894 ECC result Gain_Prime 0.0 for DET 23 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 23 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 23 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 23 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 24 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 24 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 24 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 26 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 27 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,895 ECC result Gain_Prime 0.0 for DET 27 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 27 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 27 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 27 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 27 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 28 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 28 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 28 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 29 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 29 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 29 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,896 ECC result Gain_Prime 0.0 for DET 30 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 30 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 30 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 30 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 30 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 31 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 31 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 31 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,897 ECC result Gain_Prime 0.0 for DET 32 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 15:28:08,905 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_modn1sxk 2026-03-12 15:28:08,934 Soop found: SOOP 2026-03-12 15:28:09,038 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/20/CAL/solo_CAL_stix-cal-energy_20250219T225617-20250220T012016_V02.fits 2026-03-12 15:28:09,074 Soop found: SOOP 2026-03-12 15:28:09,168 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/20/CAL/solo_CAL_stix-cal-energy_20250220T225623-20250220T225644_V02.fits 2026-03-12 15:28:09,327 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2wrkvct0 2026-03-12 15:28:09,327 Read config from in: /tmp/ecc_context_ecc_cfg_1_2wrkvct0/post_ecc.ini 2026-03-12 15:28:10,581 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2wrkvct0/solo_L1_stix-cal-energy_20250206_V03_ecc_in.fits 2026-03-12 15:38:09,797 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250206_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250206_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250206_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 15:38:17,670 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 15:38:17,677 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2wrkvct0 2026-03-12 15:38:17,702 Soop found: SOOP 2026-03-12 15:38:17,796 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/06/CAL/solo_CAL_stix-cal-energy_20250206T004745-20250206T031144_V02.fits 2026-03-12 15:38:17,956 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f1s27qv7 2026-03-12 15:38:17,956 Read config from in: /tmp/ecc_context_ecc_cfg_1_f1s27qv7/post_ecc.ini 2026-03-12 15:38:19,200 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f1s27qv7/solo_L1_stix-cal-energy_20250203_V03_ecc_in.fits 2026-03-12 15:48:02,677 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250203_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250203_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250203_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 15:48:08,965 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 15:48:08,972 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f1s27qv7 2026-03-12 15:48:08,998 Soop found: SOOP 2026-03-12 15:48:09,096 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/03/CAL/solo_CAL_stix-cal-energy_20250203T002200-20250203T024651_V02.fits 2026-03-12 15:48:09,259 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g1956ktr 2026-03-12 15:48:09,260 Read config from in: /tmp/ecc_context_ecc_cfg_1_g1956ktr/post_ecc.ini 2026-03-12 15:48:10,500 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g1956ktr/solo_L1_stix-cal-energy_20250217_V03_ecc_in.fits 2026-03-12 15:57:45,496 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250217_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250217_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250217_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 15:57:51,863 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 15:57:51,871 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g1956ktr 2026-03-12 15:57:51,896 Soop found: SOOP 2026-03-12 15:57:51,992 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/17/CAL/solo_CAL_stix-cal-energy_20250217T025603-20250217T052003_V02.fits 2026-03-12 15:57:52,147 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kohyk897 2026-03-12 15:57:52,147 Read config from in: /tmp/ecc_context_ecc_cfg_1_kohyk897/post_ecc.ini 2026-03-12 15:57:53,387 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kohyk897/solo_L1_stix-cal-energy_20250218_V03_ecc_in.fits 2026-03-12 16:07:18,073 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250218_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250218_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250218_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 16:07:24,397 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 16:07:24,404 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kohyk897 2026-03-12 16:07:24,431 Soop found: SOOP 2026-03-12 16:07:24,529 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/18/CAL/solo_CAL_stix-cal-energy_20250218T025609-20250218T043532_V02.fits 2026-03-12 16:07:24,690 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jlrl1ffh 2026-03-12 16:07:24,691 Read config from in: /tmp/ecc_context_ecc_cfg_1_jlrl1ffh/post_ecc.ini 2026-03-12 16:07:25,941 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jlrl1ffh/solo_L1_stix-cal-energy_20250223_V03_ecc_in.fits 2026-03-12 16:16:45,711 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250223_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250223_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250223_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 16:16:52,047 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 16:16:52,056 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jlrl1ffh 2026-03-12 16:16:52,083 Soop found: SOOP 2026-03-12 16:16:52,180 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/23/CAL/solo_CAL_stix-cal-energy_20250222T230422-20250223T012822_V02.fits 2026-03-12 16:16:52,345 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iok3cv44 2026-03-12 16:16:52,346 Read config from in: /tmp/ecc_context_ecc_cfg_1_iok3cv44/post_ecc.ini 2026-03-12 16:16:53,596 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iok3cv44/solo_L1_stix-cal-energy_20250216_V03_ecc_in.fits 2026-03-12 16:26:36,622 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250216_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250216_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250216_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 16:26:42,970 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 16:26:42,977 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_iok3cv44 2026-03-12 16:26:43,006 Soop found: SOOP 2026-03-12 16:26:43,104 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/16/CAL/solo_CAL_stix-cal-energy_20250216T023457-20250216T045937_V02.fits 2026-03-12 16:26:43,265 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dvkygzpr 2026-03-12 16:26:43,266 Read config from in: /tmp/ecc_context_ecc_cfg_1_dvkygzpr/post_ecc.ini 2026-03-12 16:26:44,524 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dvkygzpr/solo_L1_stix-cal-energy_20250221_V03_ecc_in.fits 2026-03-12 16:35:54,696 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250221_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250221_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250221_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 16:36:02,532 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 16:36:02,538 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dvkygzpr 2026-03-12 16:36:02,563 Soop found: SOOP 2026-03-12 16:36:02,656 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/21/CAL/solo_CAL_stix-cal-energy_20250220T230411-20250221T012810_V02.fits 2026-03-12 16:36:02,815 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r09mvbqe 2026-03-12 16:36:02,815 Read config from in: /tmp/ecc_context_ecc_cfg_1_r09mvbqe/post_ecc.ini 2026-03-12 16:36:04,052 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r09mvbqe/solo_L1_stix-cal-energy_20250212_V03_ecc_in.fits 2026-03-12 16:45:31,218 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250212_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250212_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250212_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 16:45:37,465 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 16:45:37,472 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r09mvbqe 2026-03-12 16:45:37,500 Soop found: SOOP 2026-03-12 16:45:37,599 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/12/CAL/solo_CAL_stix-cal-energy_20250212T020108-20250212T042531_V02.fits 2026-03-12 16:45:37,758 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d7rh5me0 2026-03-12 16:45:37,758 Read config from in: /tmp/ecc_context_ecc_cfg_1_d7rh5me0/post_ecc.ini 2026-03-12 16:45:38,997 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d7rh5me0/solo_L1_stix-cal-energy_20250227_V03_ecc_in.fits 2026-03-12 16:55:06,739 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250227_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250227_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250227_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 16:55:12,967 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 16:55:12,975 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d7rh5me0 2026-03-12 16:55:13,001 Soop found: SOOP 2026-03-12 16:55:13,096 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/27/CAL/solo_CAL_stix-cal-energy_20250226T230447-20250227T012847_V02.fits 2026-03-12 16:55:13,254 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vmavt9yd 2026-03-12 16:55:13,255 Read config from in: /tmp/ecc_context_ecc_cfg_1_vmavt9yd/post_ecc.ini 2026-03-12 16:55:14,503 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vmavt9yd/solo_L1_stix-cal-energy_20250211_V03_ecc_in.fits 2026-03-12 17:04:47,214 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250211_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250211_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250211_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 17:04:53,617 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 17:04:53,624 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vmavt9yd 2026-03-12 17:04:53,650 Soop found: SOOP 2026-03-12 17:04:53,746 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/11/CAL/solo_CAL_stix-cal-energy_20250211T015959-20250211T042401_V02.fits 2026-03-12 17:04:53,902 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ltuj4npl 2026-03-12 17:04:53,903 Read config from in: /tmp/ecc_context_ecc_cfg_1_ltuj4npl/post_ecc.ini 2026-03-12 17:04:55,146 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ltuj4npl/solo_L1_stix-cal-energy_20250226_V03_ecc_in.fits 2026-03-12 17:14:16,530 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250226_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250226_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250226_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 17:14:22,813 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 17:14:22,821 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ltuj4npl 2026-03-12 17:14:22,849 Soop found: SOOP 2026-03-12 17:14:22,945 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/26/CAL/solo_CAL_stix-cal-energy_20250225T230441-20250226T012840_V02.fits 2026-03-12 17:14:23,109 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xjqwk4w1 2026-03-12 17:14:23,110 Read config from in: /tmp/ecc_context_ecc_cfg_1_xjqwk4w1/post_ecc.ini 2026-03-12 17:14:24,357 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xjqwk4w1/solo_L1_stix-cal-energy_20250219_V03_ecc_in.fits 2026-03-12 17:23:59,680 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250219_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250219_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250219_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 17:24:06,000 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 17:24:06,010 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xjqwk4w1 2026-03-12 17:24:06,041 Soop found: SOOP 2026-03-12 17:24:06,145 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/19/CAL/solo_CAL_stix-cal-energy_20250218T225610-20250219T012010_V02.fits 2026-03-12 17:24:06,307 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o_n9aqdt 2026-03-12 17:24:06,307 Read config from in: /tmp/ecc_context_ecc_cfg_1_o_n9aqdt/post_ecc.ini 2026-03-12 17:24:08,963 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o_n9aqdt/solo_L1_stix-cal-energy_20250222_V03_ecc_in.fits 2026-03-12 17:33:28,387 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250222_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250222_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250222_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 17:33:35,336 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 17:33:35,343 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o_n9aqdt 2026-03-12 17:33:35,370 Soop found: SOOP 2026-03-12 17:33:35,472 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/22/CAL/solo_CAL_stix-cal-energy_20250221T230417-20250222T012816_V02.fits 2026-03-12 17:33:35,634 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qz9qxkm4 2026-03-12 17:33:35,634 Read config from in: /tmp/ecc_context_ecc_cfg_1_qz9qxkm4/post_ecc.ini 2026-03-12 17:33:36,901 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qz9qxkm4/solo_L1_stix-cal-energy_20250225_V03_ecc_in.fits 2026-03-12 17:42:55,475 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250225_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250225_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250225_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 17:43:01,700 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 17:43:01,707 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qz9qxkm4 2026-03-12 17:43:01,732 Soop found: SOOP 2026-03-12 17:43:01,827 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/25/CAL/solo_CAL_stix-cal-energy_20250224T230434-20250225T012834_V02.fits 2026-03-12 17:43:01,983 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3v7uab6s 2026-03-12 17:43:01,983 Read config from in: /tmp/ecc_context_ecc_cfg_1_3v7uab6s/post_ecc.ini 2026-03-12 17:43:03,223 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3v7uab6s/solo_L1_stix-cal-energy_20250228_V03_ecc_in.fits 2026-03-12 17:52:25,924 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250228_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250228_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250228_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 17:52:32,144 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 17:52:32,151 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3v7uab6s 2026-03-12 17:52:32,175 Soop found: SOOP 2026-03-12 17:52:32,268 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/28/CAL/solo_CAL_stix-cal-energy_20250227T230453-20250228T012853_V02.fits 2026-03-12 17:52:32,430 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_juyh3mp0 2026-03-12 17:52:32,430 Read config from in: /tmp/ecc_context_ecc_cfg_1_juyh3mp0/post_ecc.ini 2026-03-12 17:52:33,661 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_juyh3mp0/solo_L1_stix-cal-energy_20250209_V03_ecc_in.fits 2026-03-12 18:02:12,217 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250209_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250209_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250209_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 18:02:18,491 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 18:02:18,497 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_juyh3mp0 2026-03-12 18:02:18,521 Soop found: SOOP 2026-03-12 18:02:18,615 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/09/CAL/solo_CAL_stix-cal-energy_20250209T004804-20250209T031506_V02.fits 2026-03-12 18:02:18,769 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jugj331w 2026-03-12 18:02:18,769 Read config from in: /tmp/ecc_context_ecc_cfg_1_jugj331w/post_ecc.ini 2026-03-12 18:02:20,015 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jugj331w/solo_L1_stix-cal-energy_20250202_V03_ecc_in.fits 2026-03-12 18:11:41,267 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250202_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250202_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250202_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 18:11:47,629 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 18:11:47,636 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jugj331w 2026-03-12 18:11:47,662 Soop found: SOOP 2026-03-12 18:11:47,757 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/02/CAL/solo_CAL_stix-cal-energy_20250202T062630-20250202T081151_V02.fits 2026-03-12 18:11:47,916 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_enmwi5us 2026-03-12 18:11:47,917 Read config from in: /tmp/ecc_context_ecc_cfg_1_enmwi5us/post_ecc.ini 2026-03-12 18:11:49,177 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_enmwi5us/solo_L1_stix-cal-energy_20250213_V03_ecc_in.fits 2026-03-12 18:21:18,285 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250213_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250213_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250213_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 18:21:26,176 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 18:21:26,182 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_enmwi5us 2026-03-12 18:21:26,206 Soop found: SOOP 2026-03-12 18:21:26,300 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/13/CAL/solo_CAL_stix-cal-energy_20250213T023146-20250213T045546_V02.fits 2026-03-12 18:21:26,452 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qu07uljv 2026-03-12 18:21:26,452 Read config from in: /tmp/ecc_context_ecc_cfg_1_qu07uljv/post_ecc.ini 2026-03-12 18:21:27,699 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qu07uljv/solo_L1_stix-cal-energy_20250215_V03_ecc_in.fits 2026-03-12 18:31:08,861 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250215_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250215_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250215_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 18:31:15,074 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 18:31:15,081 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qu07uljv 2026-03-12 18:31:15,104 Soop found: SOOP 2026-03-12 18:31:15,198 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/15/CAL/solo_CAL_stix-cal-energy_20250215T023451-20250215T045851_V02.fits 2026-03-12 18:31:15,357 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4tt7im_x 2026-03-12 18:31:15,358 Read config from in: /tmp/ecc_context_ecc_cfg_1_4tt7im_x/post_ecc.ini 2026-03-12 18:31:16,594 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4tt7im_x/solo_L1_stix-cal-energy_20250204_V03_ecc_in.fits 2026-03-12 18:40:45,067 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250204_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250204_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250204_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 18:40:51,574 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 18:40:51,589 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4tt7im_x 2026-03-12 18:40:51,619 Soop found: SOOP 2026-03-12 18:40:51,717 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/04/CAL/solo_CAL_stix-cal-energy_20250204T004714-20250204T031115_V02.fits 2026-03-12 18:40:51,894 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b2hi5vol 2026-03-12 18:40:51,894 Read config from in: /tmp/ecc_context_ecc_cfg_1_b2hi5vol/post_ecc.ini 2026-03-12 18:40:53,183 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b2hi5vol/solo_L1_stix-cal-energy_20250430_V03_ecc_in.fits 2026-03-12 18:50:36,631 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250430_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250430_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250430_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250430_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 18:50:42,881 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 18:50:42,890 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b2hi5vol 2026-03-12 18:50:42,916 Soop found: SOOP 2026-03-12 18:50:43,014 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/30/CAL/solo_CAL_stix-cal-energy_20250430T030101-20250430T052651_V02.fits 2026-03-12 18:50:43,165 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qtb0ngm1 2026-03-12 18:50:43,166 Read config from in: /tmp/ecc_context_ecc_cfg_1_qtb0ngm1/post_ecc.ini 2026-03-12 18:50:44,406 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qtb0ngm1/solo_L1_stix-cal-energy_20250410_V03_ecc_in.fits 2026-03-12 19:00:07,943 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250410_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250410_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250410_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250410_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 19:00:14,161 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 19:00:14,172 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qtb0ngm1 2026-03-12 19:00:14,198 Soop found: SOOP 2026-03-12 19:00:14,198 Soop found: SOOP 2026-03-12 19:00:14,297 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/10/CAL/solo_CAL_stix-cal-energy_20250410T000444-20250410T022844_V02.fits 2026-03-12 19:00:14,455 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rvu2k5hw 2026-03-12 19:00:14,455 Read config from in: /tmp/ecc_context_ecc_cfg_1_rvu2k5hw/post_ecc.ini 2026-03-12 19:00:15,708 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rvu2k5hw/solo_L1_stix-cal-energy_20250401_V03_ecc_in.fits 2026-03-12 19:10:33,668 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250401_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250401_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250401_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250401_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 19:10:40,686 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 19:10:40,698 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rvu2k5hw 2026-03-12 19:10:40,734 Soop found: SOOP 2026-03-12 19:10:40,843 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/01/CAL/solo_CAL_stix-cal-energy_20250401T003337-20250401T025934_V02.fits 2026-03-12 19:10:41,019 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__86k7m9y 2026-03-12 19:10:41,019 Read config from in: /tmp/ecc_context_ecc_cfg_1__86k7m9y/post_ecc.ini 2026-03-12 19:10:43,719 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__86k7m9y/solo_L1_stix-cal-energy_20250424_V03_ecc_in.fits 2026-03-12 19:20:40,316 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250424_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250424_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250424_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250424_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 19:20:46,622 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 19:20:46,629 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__86k7m9y 2026-03-12 19:20:46,653 Soop found: SOOP 2026-03-12 19:20:46,654 Soop found: SOOP 2026-03-12 19:20:46,654 Soop found: SOOP 2026-03-12 19:20:46,752 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/24/CAL/solo_CAL_stix-cal-energy_20250424T003302-20250424T025344_V02.fits 2026-03-12 19:20:46,905 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h9uermdz 2026-03-12 19:20:46,906 Read config from in: /tmp/ecc_context_ecc_cfg_1_h9uermdz/post_ecc.ini 2026-03-12 19:20:48,142 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h9uermdz/solo_L1_stix-cal-energy_20250408_V03_ecc_in.fits 2026-03-12 19:30:21,375 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250408_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250408_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250408_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250408_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 19:30:27,653 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 19:30:27,660 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h9uermdz 2026-03-12 19:30:27,685 Soop found: SOOP 2026-03-12 19:30:27,685 Soop found: SOOP 2026-03-12 19:30:27,783 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/08/CAL/solo_CAL_stix-cal-energy_20250408T000246-20250408T022646_V02.fits 2026-03-12 19:30:27,941 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l41g9j49 2026-03-12 19:30:27,942 Read config from in: /tmp/ecc_context_ecc_cfg_1_l41g9j49/post_ecc.ini 2026-03-12 19:30:29,190 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l41g9j49/solo_L1_stix-cal-energy_20250405_V03_ecc_in.fits 2026-03-12 19:40:28,903 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250405_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250405_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250405_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250405_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 19:40:35,202 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 19:40:35,210 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l41g9j49 2026-03-12 19:40:35,240 Soop found: SOOP 2026-03-12 19:40:35,339 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/05/CAL/solo_CAL_stix-cal-energy_20250404T235423-20250405T021823_V02.fits 2026-03-12 19:40:35,501 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nh8liygc 2026-03-12 19:40:35,502 Read config from in: /tmp/ecc_context_ecc_cfg_1_nh8liygc/post_ecc.ini 2026-03-12 19:40:36,747 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nh8liygc/solo_L1_stix-cal-energy_20250414_V03_ecc_in.fits 2026-03-12 19:50:44,538 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250414_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250414_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250414_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250414_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 19:50:50,976 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 19:50:50,983 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nh8liygc 2026-03-12 19:50:51,009 Soop found: SOOP 2026-03-12 19:50:51,009 Soop found: SOOP 2026-03-12 19:50:51,106 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/14/CAL/solo_CAL_stix-cal-energy_20250414T034155-20250414T060833_V02.fits 2026-03-12 19:50:51,267 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wmp8zbzy 2026-03-12 19:50:51,268 Read config from in: /tmp/ecc_context_ecc_cfg_1_wmp8zbzy/post_ecc.ini 2026-03-12 19:50:52,520 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wmp8zbzy/solo_L1_stix-cal-energy_20250407_V03_ecc_in.fits 2026-03-12 20:00:26,117 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250407_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250407_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250407_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250407_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 20:00:32,442 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 20:00:32,449 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wmp8zbzy 2026-03-12 20:00:32,475 Soop found: SOOP 2026-03-12 20:00:32,476 Soop found: SOOP 2026-03-12 20:00:32,574 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/07/CAL/solo_CAL_stix-cal-energy_20250407T000241-20250407T022640_V02.fits 2026-03-12 20:00:32,728 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k2thmy5x 2026-03-12 20:00:32,729 Read config from in: /tmp/ecc_context_ecc_cfg_1_k2thmy5x/post_ecc.ini 2026-03-12 20:00:33,972 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k2thmy5x/solo_L1_stix-cal-energy_20250420_V03_ecc_in.fits 2026-03-12 20:10:35,550 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250420_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250420_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250420_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250420_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 20:10:43,536 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 20:10:43,543 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k2thmy5x 2026-03-12 20:10:43,568 Soop found: SOOP 2026-03-12 20:10:43,568 Soop found: SOOP 2026-03-12 20:10:43,664 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/20/CAL/solo_CAL_stix-cal-energy_20250420T045833-20250420T065241_V02.fits 2026-03-12 20:10:43,828 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zd4ewwrx 2026-03-12 20:10:43,829 Read config from in: /tmp/ecc_context_ecc_cfg_1_zd4ewwrx/post_ecc.ini 2026-03-12 20:10:45,062 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zd4ewwrx/solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits 2026-03-12 20:20:20,902 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 20:20:27,132 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 20:20:27,139 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zd4ewwrx 2026-03-12 20:20:27,168 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dfakehbp 2026-03-12 20:20:27,169 Read config from in: /tmp/ecc_context_ecc_cfg_1_dfakehbp/post_ecc.ini 2026-03-12 20:20:28,410 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dfakehbp/solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits 2026-03-12 20:26:31,021 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250406_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 20:27:27,566 Run ecc post fit: replaced [77.1 %] gain offset pairs with 'better fits' 2026-03-12 20:27:27,568 ECC result Gain_Prime 1.6166475111877348 for DET 4 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.6152522932999207 for DET 8 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.61126400081792 for DET 8 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.612602169493188 for DET 13 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.6027770235527512 for DET 14 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.602878897099416 for DET 14 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.6152522932999207 for DET 17 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.6152522932999207 for DET 21 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.602748589318157 for DET 24 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,569 ECC result Gain_Prime 1.6152522932999207 for DET 31 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-03-12 20:27:27,570 ECC result Gain_Prime 0.0 for DET 1 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,570 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,570 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,570 ECC result Gain_Prime 0.0 for DET 1 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,570 ECC result Gain_Prime 0.0 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,570 ECC result Gain_Prime 0.0 for DET 2 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,570 ECC result Gain_Prime 0.0 for DET 2 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,571 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,571 ECC result Gain_Prime 0.0 for DET 3 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,571 ECC result Gain_Prime 0.0 for DET 3 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,571 ECC result Gain_Prime 0.0 for DET 3 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,571 ECC result Gain_Prime 0.0 for DET 3 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,571 ECC result Gain_Prime 0.0 for DET 3 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,571 ECC result Gain_Prime 0.0 for DET 4 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,571 ECC result Gain_Prime 0.0 for DET 4 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 5 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 5 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 5 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 5 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 5 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 6 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,572 ECC result Gain_Prime 0.0 for DET 9 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 9 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 10 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 11 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 11 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 12 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 13 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 13 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 13 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 14 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,573 ECC result Gain_Prime 0.0 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 15 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 16 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 16 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 16 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 16 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 16 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 17 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 17 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,574 ECC result Gain_Prime 0.0 for DET 18 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 18 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 18 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 20 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 21 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 22 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 23 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 23 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 23 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,575 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 24 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 24 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 25 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 25 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 25 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 25 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 26 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 27 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 27 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,576 ECC result Gain_Prime 0.0 for DET 27 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 28 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 29 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 30 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 30 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 32 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 32 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 32 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 32 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,577 ECC result Gain_Prime 0.0 for DET 32 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 20:27:27,582 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dfakehbp 2026-03-12 20:27:27,607 Soop found: SOOP 2026-03-12 20:27:27,708 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/06/CAL/solo_CAL_stix-cal-energy_20250405T235429-20250406T021829_V02.fits 2026-03-12 20:27:27,744 Soop found: SOOP 2026-03-12 20:27:27,744 Soop found: SOOP 2026-03-12 20:27:27,838 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/06/CAL/solo_CAL_stix-cal-energy_20250406T235435-20250406T235507_V02.fits 2026-03-12 20:27:28,003 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w2prr113 2026-03-12 20:27:28,004 Read config from in: /tmp/ecc_context_ecc_cfg_1_w2prr113/post_ecc.ini 2026-03-12 20:27:29,238 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w2prr113/solo_L1_stix-cal-energy_20250403_V03_ecc_in.fits 2026-03-12 20:37:31,222 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250403_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250403_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250403_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250403_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 20:37:38,598 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 20:37:38,609 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w2prr113 2026-03-12 20:37:38,641 Soop found: SOOP 2026-03-12 20:37:38,740 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/03/CAL/solo_CAL_stix-cal-energy_20250403T005324-20250403T031104_V02.fits 2026-03-12 20:37:38,903 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mym6_5tw 2026-03-12 20:37:38,905 Read config from in: /tmp/ecc_context_ecc_cfg_1_mym6_5tw/post_ecc.ini 2026-03-12 20:37:40,141 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mym6_5tw/solo_L1_stix-cal-energy_20250417_V03_ecc_in.fits 2026-03-12 20:47:45,997 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250417_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250417_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250417_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250417_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 20:47:52,257 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 20:47:52,264 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mym6_5tw 2026-03-12 20:47:52,289 Soop found: SOOP 2026-03-12 20:47:52,290 Soop found: SOOP 2026-03-12 20:47:52,388 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/17/CAL/solo_CAL_stix-cal-energy_20250417T044442-20250417T070842_V02.fits 2026-03-12 20:47:52,543 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w4bq9h7q 2026-03-12 20:47:52,543 Read config from in: /tmp/ecc_context_ecc_cfg_1_w4bq9h7q/post_ecc.ini 2026-03-12 20:47:53,786 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w4bq9h7q/solo_L1_stix-cal-energy_20250418_V03_ecc_in.fits 2026-03-12 20:57:44,514 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250418_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250418_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250418_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250418_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 20:57:50,808 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 20:57:50,815 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w4bq9h7q 2026-03-12 20:57:50,841 Soop found: SOOP 2026-03-12 20:57:50,842 Soop found: SOOP 2026-03-12 20:57:50,937 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/18/CAL/solo_CAL_stix-cal-energy_20250418T044449-20250418T070914_V02.fits 2026-03-12 20:57:51,106 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j9tz5_2o 2026-03-12 20:57:51,107 Read config from in: /tmp/ecc_context_ecc_cfg_1_j9tz5_2o/post_ecc.ini 2026-03-12 20:57:53,825 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j9tz5_2o/solo_L1_stix-cal-energy_20250423_V03_ecc_in.fits 2026-03-12 21:07:32,521 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250423_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250423_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250423_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250423_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 21:07:38,787 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 21:07:38,794 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j9tz5_2o 2026-03-12 21:07:38,819 Soop found: SOOP 2026-03-12 21:07:38,819 Soop found: SOOP 2026-03-12 21:07:38,918 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/23/CAL/solo_CAL_stix-cal-energy_20250423T003113-20250423T025513_V02.fits 2026-03-12 21:07:39,073 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_66gyqus7 2026-03-12 21:07:39,073 Read config from in: /tmp/ecc_context_ecc_cfg_1_66gyqus7/post_ecc.ini 2026-03-12 21:07:40,311 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_66gyqus7/solo_L1_stix-cal-energy_20250416_V03_ecc_in.fits 2026-03-12 21:17:50,493 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250416_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250416_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250416_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250416_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 21:17:56,862 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 21:17:56,871 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_66gyqus7 2026-03-12 21:17:56,897 Soop found: SOOP 2026-03-12 21:17:56,897 Soop found: SOOP 2026-03-12 21:17:56,992 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/16/CAL/solo_CAL_stix-cal-energy_20250416T043641-20250416T070127_V02.fits 2026-03-12 21:17:57,151 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dgohit2v 2026-03-12 21:17:57,152 Read config from in: /tmp/ecc_context_ecc_cfg_1_dgohit2v/post_ecc.ini 2026-03-12 21:17:58,380 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dgohit2v/solo_L1_stix-cal-energy_20250421_V03_ecc_in.fits 2026-03-12 21:28:02,336 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250421_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250421_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250421_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250421_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 21:28:08,582 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 21:28:08,589 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dgohit2v 2026-03-12 21:28:08,614 Soop found: SOOP 2026-03-12 21:28:08,614 Soop found: SOOP 2026-03-12 21:28:08,707 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/21/CAL/solo_CAL_stix-cal-energy_20250421T002400-20250421T024800_V02.fits 2026-03-12 21:28:08,868 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pelenvv4 2026-03-12 21:28:08,869 Read config from in: /tmp/ecc_context_ecc_cfg_1_pelenvv4/post_ecc.ini 2026-03-12 21:28:10,109 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pelenvv4/solo_L1_stix-cal-energy_20250412_V03_ecc_in.fits 2026-03-12 21:37:50,700 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250412_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250412_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250412_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250412_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 21:37:57,082 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 21:37:57,089 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pelenvv4 2026-03-12 21:37:57,114 Soop found: SOOP 2026-03-12 21:37:57,114 Soop found: SOOP 2026-03-12 21:37:57,215 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/12/CAL/solo_CAL_stix-cal-energy_20250412T000804-20250412T023204_V02.fits 2026-03-12 21:37:57,370 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zvebogzs 2026-03-12 21:37:57,371 Read config from in: /tmp/ecc_context_ecc_cfg_1_zvebogzs/post_ecc.ini 2026-03-12 21:37:58,599 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zvebogzs/solo_L1_stix-cal-energy_20250427_V03_ecc_in.fits 2026-03-12 21:47:46,536 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250427_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250427_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250427_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250427_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 21:47:53,566 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 21:47:53,573 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zvebogzs 2026-03-12 21:47:53,601 Soop found: SOOP 2026-03-12 21:47:53,601 Soop found: SOOP 2026-03-12 21:47:53,602 Soop found: SOOP 2026-03-12 21:47:53,705 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/27/CAL/solo_CAL_stix-cal-energy_20250427T013002-20250427T035729_V02.fits 2026-03-12 21:47:53,866 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oju6c5r5 2026-03-12 21:47:53,866 Read config from in: /tmp/ecc_context_ecc_cfg_1_oju6c5r5/post_ecc.ini 2026-03-12 21:47:55,131 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oju6c5r5/solo_L1_stix-cal-energy_20250411_V03_ecc_in.fits 2026-03-12 21:57:37,334 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250411_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250411_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250411_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250411_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 21:57:45,124 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 21:57:45,131 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oju6c5r5 2026-03-12 21:57:45,155 Soop found: SOOP 2026-03-12 21:57:45,155 Soop found: SOOP 2026-03-12 21:57:45,263 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/11/CAL/solo_CAL_stix-cal-energy_20250411T000450-20250411T022906_V02.fits 2026-03-12 21:57:45,419 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xip2j4xs 2026-03-12 21:57:45,420 Read config from in: /tmp/ecc_context_ecc_cfg_1_xip2j4xs/post_ecc.ini 2026-03-12 21:57:46,653 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xip2j4xs/solo_L1_stix-cal-energy_20250426_V03_ecc_in.fits 2026-03-12 22:07:29,736 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250426_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250426_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250426_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250426_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 22:07:36,078 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 22:07:36,085 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xip2j4xs 2026-03-12 22:07:36,110 Soop found: SOOP 2026-03-12 22:07:36,111 Soop found: SOOP 2026-03-12 22:07:36,111 Soop found: SOOP 2026-03-12 22:07:36,206 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/26/CAL/solo_CAL_stix-cal-energy_20250426T012956-20250426T035356_V02.fits 2026-03-12 22:07:36,373 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ms69smdm 2026-03-12 22:07:36,373 Read config from in: /tmp/ecc_context_ecc_cfg_1_ms69smdm/post_ecc.ini 2026-03-12 22:07:37,618 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ms69smdm/solo_L1_stix-cal-energy_20250419_V03_ecc_in.fits 2026-03-12 22:17:21,398 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250419_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250419_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250419_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250419_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 22:17:27,692 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 22:17:27,699 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ms69smdm 2026-03-12 22:17:27,724 Soop found: SOOP 2026-03-12 22:17:27,725 Soop found: SOOP 2026-03-12 22:17:27,818 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/19/CAL/solo_CAL_stix-cal-energy_20250419T045828-20250419T072227_V02.fits 2026-03-12 22:17:27,977 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f0sd7lf2 2026-03-12 22:17:27,977 Read config from in: /tmp/ecc_context_ecc_cfg_1_f0sd7lf2/post_ecc.ini 2026-03-12 22:17:29,227 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f0sd7lf2/solo_L1_stix-cal-energy_20250422_V03_ecc_in.fits 2026-03-12 22:27:23,015 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250422_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250422_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250422_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250422_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 22:27:29,384 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 22:27:29,392 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f0sd7lf2 2026-03-12 22:27:29,418 Soop found: SOOP 2026-03-12 22:27:29,418 Soop found: SOOP 2026-03-12 22:27:29,512 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/22/CAL/solo_CAL_stix-cal-energy_20250422T002407-20250422T024818_V02.fits 2026-03-12 22:27:29,668 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__pqiu37s 2026-03-12 22:27:29,668 Read config from in: /tmp/ecc_context_ecc_cfg_1__pqiu37s/post_ecc.ini 2026-03-12 22:27:30,914 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__pqiu37s/solo_L1_stix-cal-energy_20250425_V03_ecc_in.fits 2026-03-12 22:37:09,901 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250425_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250425_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250425_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250425_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 22:37:16,172 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 22:37:16,179 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__pqiu37s 2026-03-12 22:37:16,205 Soop found: SOOP 2026-03-12 22:37:16,205 Soop found: SOOP 2026-03-12 22:37:16,304 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/25/CAL/solo_CAL_stix-cal-energy_20250425T010440-20250425T032843_V02.fits 2026-03-12 22:37:16,458 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xzu9oryw 2026-03-12 22:37:16,458 Read config from in: /tmp/ecc_context_ecc_cfg_1_xzu9oryw/post_ecc.ini 2026-03-12 22:37:17,704 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xzu9oryw/solo_L1_stix-cal-energy_20250428_V03_ecc_in.fits 2026-03-12 22:47:03,089 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250428_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250428_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250428_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250428_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 22:47:09,344 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 22:47:09,350 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xzu9oryw 2026-03-12 22:47:09,377 Soop found: SOOP 2026-03-12 22:47:09,377 Soop found: SOOP 2026-03-12 22:47:09,470 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/28/CAL/solo_CAL_stix-cal-energy_20250428T025710-20250428T052109_V02.fits 2026-03-12 22:47:09,625 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8ailt5x7 2026-03-12 22:47:09,625 Read config from in: /tmp/ecc_context_ecc_cfg_1_8ailt5x7/post_ecc.ini 2026-03-12 22:47:10,868 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8ailt5x7/solo_L1_stix-cal-energy_20250409_V03_ecc_in.fits 2026-03-12 22:56:34,090 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250409_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250409_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250409_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250409_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 22:56:41,766 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 22:56:41,773 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8ailt5x7 2026-03-12 22:56:41,798 Soop found: SOOP 2026-03-12 22:56:41,798 Soop found: SOOP 2026-03-12 22:56:41,893 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/09/CAL/solo_CAL_stix-cal-energy_20250409T000306-20250409T022707_V02.fits 2026-03-12 22:56:42,051 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fpifk0t5 2026-03-12 22:56:42,051 Read config from in: /tmp/ecc_context_ecc_cfg_1_fpifk0t5/post_ecc.ini 2026-03-12 22:56:43,289 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fpifk0t5/solo_L1_stix-cal-energy_20250429_V03_ecc_in.fits 2026-03-12 23:06:26,946 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250429_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250429_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250429_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250429_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 23:06:33,509 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 23:06:33,519 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fpifk0t5 2026-03-12 23:06:33,547 Soop found: SOOP 2026-03-12 23:06:33,547 Soop found: SOOP 2026-03-12 23:06:33,547 Soop found: SOOP 2026-03-12 23:06:33,647 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/29/CAL/solo_CAL_stix-cal-energy_20250429T025715-20250429T052115_V02.fits 2026-03-12 23:06:33,860 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u58zobkt 2026-03-12 23:06:33,860 Read config from in: /tmp/ecc_context_ecc_cfg_1_u58zobkt/post_ecc.ini 2026-03-12 23:06:35,116 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u58zobkt/solo_L1_stix-cal-energy_20250402_V03_ecc_in.fits 2026-03-12 23:17:08,210 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250402_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250402_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250402_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250402_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 23:17:15,596 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 23:17:15,605 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u58zobkt 2026-03-12 23:17:15,633 No soops found for time: 2025-04-02 00:53:18.804868 - 2025-04-02 03:17:18.821337 2026-03-12 23:17:15,729 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/02/CAL/solo_CAL_stix-cal-energy_20250402T005318-20250402T031718_V02.fits 2026-03-12 23:17:15,889 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_um7aetlr 2026-03-12 23:17:15,889 Read config from in: /tmp/ecc_context_ecc_cfg_1_um7aetlr/post_ecc.ini 2026-03-12 23:17:17,134 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_um7aetlr/solo_L1_stix-cal-energy_20250413_V03_ecc_in.fits 2026-03-12 23:26:46,345 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250413_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250413_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250413_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250413_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 23:26:52,760 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 23:26:52,762 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-03-12 23:26:52,769 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_um7aetlr 2026-03-12 23:26:52,795 Soop found: SOOP 2026-03-12 23:26:52,795 Soop found: SOOP 2026-03-12 23:26:52,890 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/13/CAL/solo_CAL_stix-cal-energy_20250413T000810-20250413T024907_V02.fits 2026-03-12 23:26:53,047 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_py2jdhvt 2026-03-12 23:26:53,047 Read config from in: /tmp/ecc_context_ecc_cfg_1_py2jdhvt/post_ecc.ini 2026-03-12 23:26:54,292 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_py2jdhvt/solo_L1_stix-cal-energy_20250415_V03_ecc_in.fits 2026-03-12 23:37:14,684 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250415_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250415_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250415_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250415_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 23:37:20,951 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-03-12 23:37:20,958 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_py2jdhvt 2026-03-12 23:37:20,984 Soop found: SOOP 2026-03-12 23:37:20,984 Soop found: SOOP 2026-03-12 23:37:21,077 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/15/CAL/solo_CAL_stix-cal-energy_20250415T043630-20250415T070030_V02.fits 2026-03-12 23:37:21,236 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bviun5d8 2026-03-12 23:37:21,237 Read config from in: /tmp/ecc_context_ecc_cfg_1_bviun5d8/post_ecc.ini 2026-03-12 23:37:22,496 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bviun5d8/solo_L1_stix-cal-energy_20250404_V03_ecc_in.fits 2026-03-12 23:47:32,871 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250404_V03_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250404_V03_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250404_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250404_V03_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-03-12 23:47:39,081 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-03-12 23:47:39,088 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bviun5d8 2026-03-12 23:47:39,117 No soops found for time: 2025-04-03 23:54:17.127491 - 2025-04-04 02:18:17.143959 2026-03-12 23:47:39,212 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/04/CAL/solo_CAL_stix-cal-energy_20250403T235417-20250404T021817_V02.fits