2026-04-10 10:00:10,590 read rid-lut from stixcore/data/publish/rid_lut.csv 2026-04-10 10:00:11,410 Kernel directory /hdd/data/stix/spice/kernels 2026-04-10 10:00:11,544 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260410_002.tm 2026-04-10 10:00:11,545 Kernel directory /hdd/data/stix/spice/kernels 2026-04-10 10:00:11,807 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260410_001.tm 2026-04-10 10:00:11,808 Create SOCManager @ /data/stix/SOLSOC/from_edds/tm/processing 2026-04-10 10:00:11,815 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2026-04-10 10:00:11,845 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-04-10 10:00:11,845 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2026-04-10 10:00:11,847 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-04-10 10:00:11,847 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M23_V02.json 2026-04-10 10:00:11,848 newer version (312) found for LTP23_Apr2026-Jun2026: replacing 2026-04-10 10:00:11,848 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M23_V01.json 2026-04-10 10:00:11,849 older version (257) found for LTP23_Apr2026-Jun2026: skipping 2026-04-10 10:00:11,849 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V03.json 2026-04-10 10:00:11,850 newer version (2066) found for LTP22_Dec2025-Apr2026: replacing 2026-04-10 10:00:11,850 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V02.json 2026-04-10 10:00:11,851 older version (2060) found for LTP22_Dec2025-Apr2026: skipping 2026-04-10 10:00:11,852 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2026-04-10 10:00:11,853 older version (2050) found for LTP22_Dec2025-Apr2026: skipping 2026-04-10 10:00:11,853 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2026-04-10 10:00:11,854 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2026-04-10 10:00:11,854 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2026-04-10 10:00:11,856 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2026-04-10 10:00:11,856 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2026-04-10 10:00:11,857 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2026-04-10 10:00:11,857 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2026-04-10 10:00:11,858 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2026-04-10 10:00:11,859 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2026-04-10 10:00:11,860 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2026-04-10 10:00:11,860 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2026-04-10 10:00:11,861 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2026-04-10 10:00:11,861 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2026-04-10 10:00:11,862 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2026-04-10 10:00:11,862 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2026-04-10 10:00:11,863 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2026-04-10 10:00:11,863 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2026-04-10 10:00:11,864 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2026-04-10 10:00:11,864 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2026-04-10 10:00:11,865 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2026-04-10 10:00:11,865 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2026-04-10 10:00:11,866 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2026-04-10 10:00:11,866 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2026-04-10 10:00:11,867 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2026-04-10 10:00:11,867 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2026-04-10 10:00:11,868 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2026-04-10 10:00:11,868 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2026-04-10 10:00:11,869 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2026-04-10 10:00:11,869 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2026-04-10 10:00:11,871 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2026-04-10 10:00:11,871 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2026-04-10 10:00:11,872 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2026-04-10 10:00:11,872 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2026-04-10 10:00:11,873 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2026-04-10 10:00:11,873 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2026-04-10 10:00:11,874 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2026-04-10 10:00:11,874 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2026-04-10 10:00:11,875 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2026-04-10 10:00:11,875 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2026-04-10 10:00:11,876 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2026-04-10 10:00:11,876 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2026-04-10 10:00:11,876 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2026-04-10 10:00:11,877 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2026-04-10 10:00:11,877 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2026-04-10 10:00:11,877 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2026-04-10 10:00:11,878 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2026-04-10 10:00:11,878 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2026-04-10 10:00:11,879 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2026-04-10 10:00:11,879 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2026-04-10 10:00:11,880 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2026-04-10 10:00:11,880 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2026-04-10 10:00:11,881 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2026-04-10 10:00:11,881 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2026-04-10 10:00:11,882 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2026-04-10 10:00:11,882 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2026-04-10 10:00:11,883 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2026-04-10 10:00:11,883 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2026-04-10 10:00:11,884 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2026-04-10 10:00:11,884 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2026-04-10 10:00:11,886 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2026-04-10 10:00:11,886 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2026-04-10 10:00:11,887 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2026-04-10 10:00:11,887 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2026-04-10 10:00:11,888 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2026-04-10 10:00:11,888 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2026-04-10 10:00:11,888 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2026-04-10 10:00:11,888 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2026-04-10 10:00:11,889 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2026-04-10 10:00:11,889 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2026-04-10 10:00:11,889 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2026-04-10 10:00:11,889 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2026-04-10 10:00:11,889 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-04-10 10:00:11,889 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2026-04-10 10:00:11,890 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2026-04-10 10:00:11,890 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2026-04-10 10:00:11,890 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-04-10 10:00:11,890 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2026-04-10 10:00:11,890 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2026-04-10 10:00:11,890 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2026-04-10 10:00:11,891 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2026-04-10 10:00:12,172 SOOP Rebuild Index: soops: 562observations 1247 2026-04-10 10:01:02,749 PIPELINE VERSION Version: 1.7.3 Common instrument config version: v0.1.10 PROCESSING VERSIONS Prod: Ephemeris File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/ANC/aspect.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/scienceL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/CAL/energy.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2026-04-10 10:01:02,763 CONFIG [Paths] tm_archive = /data/stix/SOLSOC/from_edds/tm/processing fits_archive = /data/stix/out/fits_v1.2.0 spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12388 parallel_batchsize_l0 = 100 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = INFO log_dir = /data/stix/out/fits_v1.2.0/logging error_mail_send = True error_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch sync_tm_at_start = True stop_after_unprocessed = True start_with_unprocessed = True last_processed = TM_LTP21_BatchRequest.PktTmRaw.SOL.0.2025.237.08.00.24.563.NHzM@2025.365.16.00.00.336.1.xml.out history_db_file = /home/stixcore/soar_pub/processing_history.sqlite [Publish] db_file = /home/stixcore/soar_pub/published.sqlite include_levels = L0, L1, ANC, LL03 waiting_period = 42d target_dir = /home/stixcore/from_pub099 report_mail_receivers = nicky.hochmuth@ateleris.ch, shane.maloney@dias.ie report_mail_send = True same_esa_name_dir = /data/stix/out/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/fits_v1.2.0 ll_waiting_period = 0d target_host = pub026.cs.technik.fhnw.ch supplement_report = /home/stixcore/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal,asp log_dir = /data/stix/out/fits_v1.2.0/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2026-04-10 10:01:02,763 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 36748 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260410_002.tm'), 'pred', datetime.datetime(2026, 4, 10, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260410_001.tm'), 'flown', datetime.datetime(2026, 4, 10, 0, 0))] IDBManager: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb Versions: [{'label': '2.26.36', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2026-04-10 10:01:03,855 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20260410_002.tm 2026-04-10 10:01:04,116 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20260410_001.tm 2026-04-10 10:01:04,117 Loaded 1 ECC configurations from index 2026-04-10 10:01:04,306 Successfully read ELUT file: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/config/data/common/elut/elut_table_20250523.csv 2026-04-10 10:01:04,372 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_62j1s4o1 2026-04-10 10:01:04,372 Read config from in: /tmp/ecc_context_ecc_cfg_1_62j1s4o1/post_ecc.ini 2026-04-10 10:01:05,623 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_62j1s4o1/solo_L1_stix-cal-energy_20251030_V03U_ecc_in.fits 2026-04-10 10:10:59,164 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251030_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251030_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251030_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251030_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 10:11:07,260 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 10:11:07,269 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_62j1s4o1 2026-04-10 10:11:07,324 Soop found: SOOP 2026-04-10 10:11:07,324 Soop found: SOOP 2026-04-10 10:11:07,324 Soop found: SOOP 2026-04-10 10:11:07,325 Soop found: SOOP 2026-04-10 10:11:07,463 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/30/CAL/solo_CAL_stix-cal-energy_20251030T002300-20251031T002300_V02.fits 2026-04-10 10:11:07,640 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c3j3_5z0 2026-04-10 10:11:07,640 Read config from in: /tmp/ecc_context_ecc_cfg_1_c3j3_5z0/post_ecc.ini 2026-04-10 10:11:08,880 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c3j3_5z0/solo_L1_stix-cal-energy_20251010_V03U_ecc_in.fits 2026-04-10 10:21:08,002 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251010_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251010_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251010_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251010_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 10:21:14,367 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-10 10:21:14,375 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c3j3_5z0 2026-04-10 10:21:14,406 Soop found: SOOP 2026-04-10 10:21:14,406 Soop found: SOOP 2026-04-10 10:21:14,513 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/10/CAL/solo_CAL_stix-cal-energy_20251010T040732-20251011T000002_V02.fits 2026-04-10 10:21:14,683 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jqf4d61z 2026-04-10 10:21:14,683 Read config from in: /tmp/ecc_context_ecc_cfg_1_jqf4d61z/post_ecc.ini 2026-04-10 10:21:15,935 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jqf4d61z/solo_L1_stix-cal-energy_20251001_V03U_ecc_in.fits 2026-04-10 10:31:24,168 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251001_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251001_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251001_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251001_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 10:31:30,598 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 10:31:30,606 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jqf4d61z 2026-04-10 10:31:30,639 Soop found: SOOP 2026-04-10 10:31:30,639 Soop found: SOOP 2026-04-10 10:31:30,639 Soop found: SOOP 2026-04-10 10:31:30,743 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/01/CAL/solo_CAL_stix-cal-energy_20251001T010738-20251002T010827_V02.fits 2026-04-10 10:31:30,915 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x308xisi 2026-04-10 10:31:30,916 Read config from in: /tmp/ecc_context_ecc_cfg_1_x308xisi/post_ecc.ini 2026-04-10 10:31:32,158 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x308xisi/solo_L1_stix-cal-energy_20251024_V03U_ecc_in.fits 2026-04-10 10:40:51,616 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251024_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251024_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251024_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251024_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 10:40:58,118 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 10:40:58,128 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x308xisi 2026-04-10 10:40:58,163 Soop found: SOOP 2026-04-10 10:40:58,163 Soop found: SOOP 2026-04-10 10:40:58,267 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/24/CAL/solo_CAL_stix-cal-energy_20251024T052754-20251025T054758_V02.fits 2026-04-10 10:40:58,439 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_amv4tt3m 2026-04-10 10:40:58,440 Read config from in: /tmp/ecc_context_ecc_cfg_1_amv4tt3m/post_ecc.ini 2026-04-10 10:40:59,705 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_amv4tt3m/solo_L1_stix-cal-energy_20251008_V03U_ecc_in.fits 2026-04-10 10:50:37,561 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251008_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251008_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251008_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251008_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 10:50:44,037 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 10:50:44,045 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_amv4tt3m 2026-04-10 10:50:44,078 Soop found: SOOP 2026-04-10 10:50:44,078 Soop found: SOOP 2026-04-10 10:50:44,079 Soop found: SOOP 2026-04-10 10:50:44,079 Soop found: SOOP 2026-04-10 10:50:44,186 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/08/CAL/solo_CAL_stix-cal-energy_20251008T040720-20251009T040720_V02.fits 2026-04-10 10:50:44,363 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g075g89w 2026-04-10 10:50:44,364 Read config from in: /tmp/ecc_context_ecc_cfg_1_g075g89w/post_ecc.ini 2026-04-10 10:50:45,613 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g075g89w/solo_L1_stix-cal-energy_20251005_V03U_ecc_in.fits 2026-04-10 11:00:22,228 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251005_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251005_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251005_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251005_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 11:00:28,712 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 11:00:28,719 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g075g89w 2026-04-10 11:00:28,752 Soop found: SOOP 2026-04-10 11:00:28,752 Soop found: SOOP 2026-04-10 11:00:28,752 Soop found: SOOP 2026-04-10 11:00:28,753 Soop found: SOOP 2026-04-10 11:00:28,851 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/05/CAL/solo_CAL_stix-cal-energy_20251005T012528-20251006T014533_V02.fits 2026-04-10 11:00:29,022 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_txq_lay6 2026-04-10 11:00:29,023 Read config from in: /tmp/ecc_context_ecc_cfg_1_txq_lay6/post_ecc.ini 2026-04-10 11:00:30,273 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_txq_lay6/solo_L1_stix-cal-energy_20251014_V03U_ecc_in.fits 2026-04-10 11:10:18,768 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251014_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251014_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251014_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251014_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 11:10:27,158 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 11:10:27,165 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_txq_lay6 2026-04-10 11:10:27,193 Soop found: SOOP 2026-04-10 11:10:27,193 Soop found: SOOP 2026-04-10 11:10:27,294 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/14/CAL/solo_CAL_stix-cal-energy_20251014T031721-20251015T031720_V02.fits 2026-04-10 11:10:27,469 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oozcniqf 2026-04-10 11:10:27,470 Read config from in: /tmp/ecc_context_ecc_cfg_1_oozcniqf/post_ecc.ini 2026-04-10 11:10:28,727 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oozcniqf/solo_L1_stix-cal-energy_20251007_V03U_ecc_in.fits 2026-04-10 11:20:16,871 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251007_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251007_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251007_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251007_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 11:20:23,273 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 11:20:23,281 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oozcniqf 2026-04-10 11:20:23,311 Soop found: SOOP 2026-04-10 11:20:23,311 Soop found: SOOP 2026-04-10 11:20:23,407 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/07/CAL/solo_CAL_stix-cal-energy_20251007T040714-20251008T040714_V02.fits 2026-04-10 11:20:23,577 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2s3a_y4d 2026-04-10 11:20:23,578 Read config from in: /tmp/ecc_context_ecc_cfg_1_2s3a_y4d/post_ecc.ini 2026-04-10 11:20:24,836 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2s3a_y4d/solo_L1_stix-cal-energy_20251020_V03U_ecc_in.fits 2026-04-10 11:30:04,791 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251020_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251020_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251020_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251020_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 11:30:11,513 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 11:30:11,520 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2s3a_y4d 2026-04-10 11:30:11,553 Soop found: SOOP 2026-04-10 11:30:11,553 Soop found: SOOP 2026-04-10 11:30:11,657 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/20/CAL/solo_CAL_stix-cal-energy_20251020T052730-20251021T052730_V02.fits 2026-04-10 11:30:11,828 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_la02jdha 2026-04-10 11:30:11,828 Read config from in: /tmp/ecc_context_ecc_cfg_1_la02jdha/post_ecc.ini 2026-04-10 11:30:13,073 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_la02jdha/solo_L1_stix-cal-energy_20251006_V03U_ecc_in.fits 2026-04-10 11:40:23,474 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251006_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251006_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251006_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251006_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 11:40:29,854 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 11:40:29,861 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_la02jdha 2026-04-10 11:40:29,893 Soop found: SOOP 2026-04-10 11:40:29,894 Soop found: SOOP 2026-04-10 11:40:29,894 Soop found: SOOP 2026-04-10 11:40:29,996 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/06/CAL/solo_CAL_stix-cal-energy_20251006T040707-20251007T040708_V02.fits 2026-04-10 11:40:30,169 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gdvajpps 2026-04-10 11:40:30,169 Read config from in: /tmp/ecc_context_ecc_cfg_1_gdvajpps/post_ecc.ini 2026-04-10 11:40:31,417 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gdvajpps/solo_L1_stix-cal-energy_20251003_V03U_ecc_in.fits 2026-04-10 11:50:26,229 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251003_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251003_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251003_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251003_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 11:50:32,642 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 11:50:32,649 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gdvajpps 2026-04-10 11:50:32,679 Soop found: SOOP 2026-04-10 11:50:32,679 Soop found: SOOP 2026-04-10 11:50:32,679 Soop found: SOOP 2026-04-10 11:50:32,680 Soop found: SOOP 2026-04-10 11:50:32,680 Soop found: SOOP 2026-04-10 11:50:32,779 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/03/CAL/solo_CAL_stix-cal-energy_20251003T011336-20251004T011850_V02.fits 2026-04-10 11:50:32,948 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3qbogo68 2026-04-10 11:50:32,949 Read config from in: /tmp/ecc_context_ecc_cfg_1_3qbogo68/post_ecc.ini 2026-04-10 11:50:34,201 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3qbogo68/solo_L1_stix-cal-energy_20251017_V03U_ecc_in.fits 2026-04-10 12:00:22,390 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251017_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251017_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251017_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251017_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 12:00:31,166 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 12:00:31,173 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3qbogo68 2026-04-10 12:00:31,199 Soop found: SOOP 2026-04-10 12:00:31,199 Soop found: SOOP 2026-04-10 12:00:31,297 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/17/CAL/solo_CAL_stix-cal-energy_20251017T032240-20251018T034959_V02.fits 2026-04-10 12:00:31,463 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pbzf0t8b 2026-04-10 12:00:31,464 Read config from in: /tmp/ecc_context_ecc_cfg_1_pbzf0t8b/post_ecc.ini 2026-04-10 12:00:32,694 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pbzf0t8b/solo_L1_stix-cal-energy_20251031_V03U_ecc_in.fits 2026-04-10 12:15:56,204 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251031_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251031_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251031_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251031_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 12:16:02,628 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 12:16:02,636 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pbzf0t8b 2026-04-10 12:16:02,665 Soop found: SOOP 2026-04-10 12:16:02,665 Soop found: SOOP 2026-04-10 12:16:02,666 Soop found: SOOP 2026-04-10 12:16:02,770 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/31/CAL/solo_CAL_stix-cal-energy_20251031T002306-20251101T002411_V02.fits 2026-04-10 12:16:02,957 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nfmrmmfp 2026-04-10 12:16:02,958 Read config from in: /tmp/ecc_context_ecc_cfg_1_nfmrmmfp/post_ecc.ini 2026-04-10 12:16:04,196 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nfmrmmfp/solo_L1_stix-cal-energy_20251018_V03U_ecc_in.fits 2026-04-10 12:25:41,139 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251018_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251018_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251018_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251018_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 12:25:47,569 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 12:25:47,577 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nfmrmmfp 2026-04-10 12:25:47,607 Soop found: SOOP 2026-04-10 12:25:47,607 Soop found: SOOP 2026-04-10 12:25:47,705 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/18/CAL/solo_CAL_stix-cal-energy_20251018T035352-20251019T035353_V02.fits 2026-04-10 12:25:47,881 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ik_dlmap 2026-04-10 12:25:47,882 Read config from in: /tmp/ecc_context_ecc_cfg_1_ik_dlmap/post_ecc.ini 2026-04-10 12:25:49,155 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ik_dlmap/solo_L1_stix-cal-energy_20251023_V03U_ecc_in.fits 2026-04-10 12:35:12,256 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251023_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251023_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251023_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251023_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 12:35:18,655 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 12:35:18,662 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ik_dlmap 2026-04-10 12:35:18,692 Soop found: SOOP 2026-04-10 12:35:18,692 Soop found: SOOP 2026-04-10 12:35:18,792 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/23/CAL/solo_CAL_stix-cal-energy_20251023T052748-20251024T052747_V02.fits 2026-04-10 12:35:18,967 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rrk2h98z 2026-04-10 12:35:18,968 Read config from in: /tmp/ecc_context_ecc_cfg_1_rrk2h98z/post_ecc.ini 2026-04-10 12:35:20,222 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rrk2h98z/solo_L1_stix-cal-energy_20251016_V03U_ecc_in.fits 2026-04-10 12:44:56,205 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251016_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251016_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251016_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251016_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 12:45:02,567 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 12:45:02,574 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rrk2h98z 2026-04-10 12:45:02,605 Soop found: SOOP 2026-04-10 12:45:02,605 Soop found: SOOP 2026-04-10 12:45:02,708 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/16/CAL/solo_CAL_stix-cal-energy_20251016T032234-20251017T032234_V02.fits 2026-04-10 12:45:02,879 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bc4uyg5h 2026-04-10 12:45:02,880 Read config from in: /tmp/ecc_context_ecc_cfg_1_bc4uyg5h/post_ecc.ini 2026-04-10 12:45:04,132 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bc4uyg5h/solo_L1_stix-cal-energy_20251021_V03U_ecc_in.fits 2026-04-10 12:54:38,693 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251021_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251021_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251021_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251021_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 12:54:45,127 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 12:54:45,136 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bc4uyg5h 2026-04-10 12:54:45,172 Soop found: SOOP 2026-04-10 12:54:45,172 Soop found: SOOP 2026-04-10 12:54:45,276 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/21/CAL/solo_CAL_stix-cal-energy_20251021T052736-20251022T052736_V02.fits 2026-04-10 12:54:45,454 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ploglm7j 2026-04-10 12:54:45,454 Read config from in: /tmp/ecc_context_ecc_cfg_1_ploglm7j/post_ecc.ini 2026-04-10 12:54:46,743 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ploglm7j/solo_L1_stix-cal-energy_20251012_V03U_ecc_in.fits 2026-04-10 13:04:38,227 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251012_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251012_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251012_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251012_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 13:04:46,177 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-10 13:04:46,184 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ploglm7j 2026-04-10 13:04:46,212 Soop found: SOOP 2026-04-10 13:04:46,212 Soop found: SOOP 2026-04-10 13:04:46,312 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/12/CAL/solo_CAL_stix-cal-energy_20251012T000507-20251013T015537_V02.fits 2026-04-10 13:04:46,483 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g_70ax4e 2026-04-10 13:04:46,484 Read config from in: /tmp/ecc_context_ecc_cfg_1_g_70ax4e/post_ecc.ini 2026-04-10 13:04:47,719 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g_70ax4e/solo_L1_stix-cal-energy_20251027_V03U_ecc_in.fits 2026-04-10 13:14:19,722 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251027_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251027_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251027_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251027_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 13:14:26,062 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 13:14:26,071 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g_70ax4e 2026-04-10 13:14:26,100 Soop found: SOOP 2026-04-10 13:14:26,100 Soop found: SOOP 2026-04-10 13:14:26,199 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/27/CAL/solo_CAL_stix-cal-energy_20251027T073307-20251028T073306_V02.fits 2026-04-10 13:14:26,401 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dqm7jgma 2026-04-10 13:14:26,402 Read config from in: /tmp/ecc_context_ecc_cfg_1_dqm7jgma/post_ecc.ini 2026-04-10 13:14:27,656 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dqm7jgma/solo_L1_stix-cal-energy_20251011_V03U_ecc_in.fits 2026-04-10 13:24:26,424 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251011_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251011_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251011_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251011_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 13:24:32,766 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 13:24:32,773 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dqm7jgma 2026-04-10 13:24:32,802 Soop found: SOOP 2026-04-10 13:24:32,802 Soop found: SOOP 2026-04-10 13:24:32,902 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/11/CAL/solo_CAL_stix-cal-energy_20251011T000501-20251012T000501_V02.fits 2026-04-10 13:24:33,089 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h0y8ujg2 2026-04-10 13:24:33,090 Read config from in: /tmp/ecc_context_ecc_cfg_1_h0y8ujg2/post_ecc.ini 2026-04-10 13:24:34,355 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h0y8ujg2/solo_L1_stix-cal-energy_20251026_V03U_ecc_in.fits 2026-04-10 13:34:06,934 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251026_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251026_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251026_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251026_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 13:34:13,328 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 13:34:13,335 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h0y8ujg2 2026-04-10 13:34:13,378 Soop found: SOOP 2026-04-10 13:34:13,379 Soop found: SOOP 2026-04-10 13:34:13,478 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/26/CAL/solo_CAL_stix-cal-energy_20251026T054810-20251027T063543_V02.fits 2026-04-10 13:34:13,650 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n4fx8x7t 2026-04-10 13:34:13,650 Read config from in: /tmp/ecc_context_ecc_cfg_1_n4fx8x7t/post_ecc.ini 2026-04-10 13:34:14,922 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n4fx8x7t/solo_L1_stix-cal-energy_20251019_V03U_ecc_in.fits 2026-04-10 13:43:51,327 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251019_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251019_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251019_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251019_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 13:43:58,096 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 13:43:58,103 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n4fx8x7t 2026-04-10 13:43:58,136 Soop found: SOOP 2026-04-10 13:43:58,137 Soop found: SOOP 2026-04-10 13:43:58,234 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/19/CAL/solo_CAL_stix-cal-energy_20251019T035359-20251020T050649_V02.fits 2026-04-10 13:43:58,420 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cdvx6at_ 2026-04-10 13:43:58,421 Read config from in: /tmp/ecc_context_ecc_cfg_1_cdvx6at_/post_ecc.ini 2026-04-10 13:43:59,708 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cdvx6at_/solo_L1_stix-cal-energy_20251022_V03U_ecc_in.fits 2026-04-10 13:53:32,696 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251022_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251022_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251022_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251022_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 13:53:39,093 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 13:53:39,101 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cdvx6at_ 2026-04-10 13:53:39,134 Soop found: SOOP 2026-04-10 13:53:39,134 Soop found: SOOP 2026-04-10 13:53:39,236 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/22/CAL/solo_CAL_stix-cal-energy_20251022T052742-20251023T052741_V02.fits 2026-04-10 13:53:39,414 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1j9hlwoj 2026-04-10 13:53:39,415 Read config from in: /tmp/ecc_context_ecc_cfg_1_1j9hlwoj/post_ecc.ini 2026-04-10 13:53:40,666 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1j9hlwoj/solo_L1_stix-cal-energy_20251025_V03U_ecc_in.fits 2026-04-10 14:03:00,773 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251025_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251025_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251025_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251025_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 14:03:08,855 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 14:03:08,862 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1j9hlwoj 2026-04-10 14:03:08,895 Soop found: SOOP 2026-04-10 14:03:08,895 Soop found: SOOP 2026-04-10 14:03:08,991 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/25/CAL/solo_CAL_stix-cal-energy_20251025T054804-20251026T054803_V02.fits 2026-04-10 14:03:09,190 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dsq_t9d3 2026-04-10 14:03:09,191 Read config from in: /tmp/ecc_context_ecc_cfg_1_dsq_t9d3/post_ecc.ini 2026-04-10 14:03:10,469 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dsq_t9d3/solo_L1_stix-cal-energy_20251028_V03U_ecc_in.fits 2026-04-10 14:12:42,652 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251028_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251028_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251028_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251028_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 14:12:48,995 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 14:12:49,002 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dsq_t9d3 2026-04-10 14:12:49,037 Soop found: SOOP 2026-04-10 14:12:49,037 Soop found: SOOP 2026-04-10 14:12:49,139 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/28/CAL/solo_CAL_stix-cal-energy_20251028T073313-20251029T073312_V02.fits 2026-04-10 14:12:49,314 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7b4cloqn 2026-04-10 14:12:49,315 Read config from in: /tmp/ecc_context_ecc_cfg_1_7b4cloqn/post_ecc.ini 2026-04-10 14:12:50,574 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7b4cloqn/solo_L1_stix-cal-energy_20251009_V03U_ecc_in.fits 2026-04-10 14:22:44,308 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251009_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251009_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251009_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251009_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 14:22:50,674 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 14:22:50,681 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7b4cloqn 2026-04-10 14:22:50,724 Soop found: SOOP 2026-04-10 14:22:50,725 Soop found: SOOP 2026-04-10 14:22:50,832 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/09/CAL/solo_CAL_stix-cal-energy_20251009T040726-20251010T040726_V02.fits 2026-04-10 14:22:51,017 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dts9yyjw 2026-04-10 14:22:51,017 Read config from in: /tmp/ecc_context_ecc_cfg_1_dts9yyjw/post_ecc.ini 2026-04-10 14:22:52,261 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dts9yyjw/solo_L1_stix-cal-energy_20251029_V03U_ecc_in.fits 2026-04-10 14:32:21,090 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251029_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251029_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251029_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251029_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 14:32:27,482 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 14:32:27,493 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dts9yyjw 2026-04-10 14:32:27,530 Soop found: SOOP 2026-04-10 14:32:27,530 Soop found: SOOP 2026-04-10 14:32:27,530 Soop found: SOOP 2026-04-10 14:32:27,633 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/29/CAL/solo_CAL_stix-cal-energy_20251029T073319-20251030T000002_V02.fits 2026-04-10 14:32:27,806 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z8no7e8i 2026-04-10 14:32:27,808 Read config from in: /tmp/ecc_context_ecc_cfg_1_z8no7e8i/post_ecc.ini 2026-04-10 14:32:29,059 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z8no7e8i/solo_L1_stix-cal-energy_20251002_V03U_ecc_in.fits 2026-04-10 14:41:58,792 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251002_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251002_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251002_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251002_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 14:42:05,130 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 14:42:05,138 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z8no7e8i 2026-04-10 14:42:05,184 Soop found: SOOP 2026-04-10 14:42:05,185 Soop found: SOOP 2026-04-10 14:42:05,185 Soop found: SOOP 2026-04-10 14:42:05,185 Soop found: SOOP 2026-04-10 14:42:05,185 Soop found: SOOP 2026-04-10 14:42:05,286 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/02/CAL/solo_CAL_stix-cal-energy_20251002T011330-20251003T011330_V02.fits 2026-04-10 14:42:05,458 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__bgiv7z2 2026-04-10 14:42:05,459 Read config from in: /tmp/ecc_context_ecc_cfg_1__bgiv7z2/post_ecc.ini 2026-04-10 14:42:06,710 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__bgiv7z2/solo_L1_stix-cal-energy_20251013_V03U_ecc_in.fits 2026-04-10 14:51:43,060 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251013_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251013_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251013_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251013_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 14:51:49,540 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 14:51:49,547 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__bgiv7z2 2026-04-10 14:51:49,584 Soop found: SOOP 2026-04-10 14:51:49,584 Soop found: SOOP 2026-04-10 14:51:49,688 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/13/CAL/solo_CAL_stix-cal-energy_20251013T031715-20251014T031714_V02.fits 2026-04-10 14:51:51,421 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1m1am1u5 2026-04-10 14:51:51,422 Read config from in: /tmp/ecc_context_ecc_cfg_1_1m1am1u5/post_ecc.ini 2026-04-10 14:51:52,681 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1m1am1u5/solo_L1_stix-cal-energy_20251015_V03U_ecc_in.fits 2026-04-10 15:01:24,636 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251015_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251015_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251015_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251015_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 15:01:30,936 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 15:01:30,943 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1m1am1u5 2026-04-10 15:01:30,981 Soop found: SOOP 2026-04-10 15:01:30,982 Soop found: SOOP 2026-04-10 15:01:31,082 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/15/CAL/solo_CAL_stix-cal-energy_20251015T031726-20251016T032228_V02.fits 2026-04-10 15:01:31,253 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vsqqoib1 2026-04-10 15:01:31,253 Read config from in: /tmp/ecc_context_ecc_cfg_1_vsqqoib1/post_ecc.ini 2026-04-10 15:01:32,507 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vsqqoib1/solo_L1_stix-cal-energy_20251004_V03U_ecc_in.fits 2026-04-10 15:11:40,965 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251004_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251004_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251004_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251004_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 15:11:47,341 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 15:11:47,350 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vsqqoib1 2026-04-10 15:11:47,379 Soop found: SOOP 2026-04-10 15:11:47,380 Soop found: SOOP 2026-04-10 15:11:47,480 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/10/04/CAL/solo_CAL_stix-cal-energy_20251004T012522-20251005T012522_V02.fits 2026-04-10 15:11:47,644 Successfully read ELUT file: /home/stixcore/STIXCore/venv/lib/python3.11/site-packages/stixcore/config/data/common/elut/elut_table_20241114.csv 2026-04-10 15:11:47,688 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xv1eu7o7 2026-04-10 15:11:47,688 Read config from in: /tmp/ecc_context_ecc_cfg_1_xv1eu7o7/post_ecc.ini 2026-04-10 15:11:48,938 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xv1eu7o7/solo_L1_stix-cal-energy_20250130_V03U_ecc_in.fits 2026-04-10 15:21:28,573 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250130_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250130_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 15:21:34,946 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 15:21:34,953 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xv1eu7o7 2026-04-10 15:21:34,983 Soop found: SOOP 2026-04-10 15:21:35,100 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/30/CAL/solo_CAL_stix-cal-energy_20250130T055857-20250131T055858_V02.fits 2026-04-10 15:21:35,275 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oudu745k 2026-04-10 15:21:35,276 Read config from in: /tmp/ecc_context_ecc_cfg_1_oudu745k/post_ecc.ini 2026-04-10 15:21:36,538 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oudu745k/solo_L1_stix-cal-energy_20250110_V03U_ecc_in.fits 2026-04-10 15:30:49,760 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250110_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250110_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 15:30:56,073 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 15:30:56,080 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oudu745k 2026-04-10 15:30:56,108 Soop found: SOOP 2026-04-10 15:30:56,208 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/10/CAL/solo_CAL_stix-cal-energy_20250110T032537-20250111T032537_V02.fits 2026-04-10 15:30:56,389 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t4_in8qf 2026-04-10 15:30:56,390 Read config from in: /tmp/ecc_context_ecc_cfg_1_t4_in8qf/post_ecc.ini 2026-04-10 15:30:57,648 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t4_in8qf/solo_L1_stix-cal-energy_20250101_V03U_ecc_in.fits 2026-04-10 15:40:27,536 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250101_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250101_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 15:40:33,852 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 15:40:33,859 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_t4_in8qf 2026-04-10 15:40:33,887 Soop found: SOOP 2026-04-10 15:40:33,989 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/01/CAL/solo_CAL_stix-cal-energy_20250101T030907-20250102T031545_V02.fits 2026-04-10 15:40:34,158 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5gefutt5 2026-04-10 15:40:34,158 Read config from in: /tmp/ecc_context_ecc_cfg_1_5gefutt5/post_ecc.ini 2026-04-10 15:40:35,455 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5gefutt5/solo_L1_stix-cal-energy_20250124_V03U_ecc_in.fits 2026-04-10 15:49:54,493 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250124_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250124_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 15:50:02,408 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 15:50:02,415 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5gefutt5 2026-04-10 15:50:02,439 Soop found: SOOP 2026-04-10 15:50:02,541 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/24/CAL/solo_CAL_stix-cal-energy_20250124T050349-20250125T050350_V02.fits 2026-04-10 15:50:02,711 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_to1cj00b 2026-04-10 15:50:02,711 Read config from in: /tmp/ecc_context_ecc_cfg_1_to1cj00b/post_ecc.ini 2026-04-10 15:50:03,941 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_to1cj00b/solo_L1_stix-cal-energy_20250108_V03U_ecc_in.fits 2026-04-10 15:59:39,391 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250108_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250108_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 15:59:45,716 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 15:59:45,723 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_to1cj00b 2026-04-10 15:59:45,754 Soop found: SOOP 2026-04-10 15:59:45,852 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/08/CAL/solo_CAL_stix-cal-energy_20250108T031730-20250109T032220_V02.fits 2026-04-10 15:59:46,021 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yrtp1r5v 2026-04-10 15:59:46,022 Read config from in: /tmp/ecc_context_ecc_cfg_1_yrtp1r5v/post_ecc.ini 2026-04-10 15:59:47,260 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yrtp1r5v/solo_L1_stix-cal-energy_20250105_V03U_ecc_in.fits 2026-04-10 16:09:14,074 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250105_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250105_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 16:09:20,576 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 16:09:20,584 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yrtp1r5v 2026-04-10 16:09:20,616 Soop found: SOOP 2026-04-10 16:09:20,616 Soop found: SOOP 2026-04-10 16:09:20,719 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/05/CAL/solo_CAL_stix-cal-energy_20250105T031711-20250106T031711_V02.fits 2026-04-10 16:09:20,898 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6fedgk3n 2026-04-10 16:09:20,899 Read config from in: /tmp/ecc_context_ecc_cfg_1_6fedgk3n/post_ecc.ini 2026-04-10 16:09:22,170 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6fedgk3n/solo_L1_stix-cal-energy_20250114_V03U_ecc_in.fits 2026-04-10 16:18:45,238 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250114_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250114_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 16:18:51,572 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 16:18:51,579 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6fedgk3n 2026-04-10 16:18:51,608 Soop found: SOOP 2026-04-10 16:18:51,713 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/14/CAL/solo_CAL_stix-cal-energy_20250114T042104-20250115T042104_V02.fits 2026-04-10 16:18:51,884 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hfq04xax 2026-04-10 16:18:51,885 Read config from in: /tmp/ecc_context_ecc_cfg_1_hfq04xax/post_ecc.ini 2026-04-10 16:18:53,149 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hfq04xax/solo_L1_stix-cal-energy_20250107_V03U_ecc_in.fits 2026-04-10 16:28:30,064 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250107_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250107_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 16:28:37,010 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 16:28:37,018 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hfq04xax 2026-04-10 16:28:37,054 Soop found: SOOP 2026-04-10 16:28:37,163 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/07/CAL/solo_CAL_stix-cal-energy_20250107T031724-20250108T031723_V02.fits 2026-04-10 16:28:37,349 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ekcb229s 2026-04-10 16:28:37,350 Read config from in: /tmp/ecc_context_ecc_cfg_1_ekcb229s/post_ecc.ini 2026-04-10 16:28:38,642 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ekcb229s/solo_L1_stix-cal-energy_20250120_V03U_ecc_in.fits 2026-04-10 16:38:27,970 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250120_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250120_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 16:38:34,361 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 16:38:34,369 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ekcb229s 2026-04-10 16:38:34,402 Soop found: SOOP 2026-04-10 16:38:34,504 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/20/CAL/solo_CAL_stix-cal-energy_20250120T050326-20250121T050326_V02.fits 2026-04-10 16:38:34,685 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ks3055kk 2026-04-10 16:38:34,685 Read config from in: /tmp/ecc_context_ecc_cfg_1_ks3055kk/post_ecc.ini 2026-04-10 16:38:35,953 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ks3055kk/solo_L1_stix-cal-energy_20250106_V03U_ecc_in.fits 2026-04-10 16:47:50,859 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250106_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250106_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250106_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250106_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 16:47:58,932 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 16:47:58,939 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ks3055kk 2026-04-10 16:47:58,964 Soop found: SOOP 2026-04-10 16:47:59,059 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/06/CAL/solo_CAL_stix-cal-energy_20250106T031718-20250107T031718_V02.fits 2026-04-10 16:47:59,232 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k4n1n9od 2026-04-10 16:47:59,233 Read config from in: /tmp/ecc_context_ecc_cfg_1_k4n1n9od/post_ecc.ini 2026-04-10 16:48:00,493 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k4n1n9od/solo_L1_stix-cal-energy_20250103_V03U_ecc_in.fits 2026-04-10 16:57:14,941 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250103_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250103_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250103_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250103_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 16:57:21,353 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 16:57:21,361 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k4n1n9od 2026-04-10 16:57:21,394 Soop found: SOOP 2026-04-10 16:57:21,492 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/03/CAL/solo_CAL_stix-cal-energy_20250103T031556-20250104T031659_V02.fits 2026-04-10 16:57:21,667 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8q6z95x5 2026-04-10 16:57:21,668 Read config from in: /tmp/ecc_context_ecc_cfg_1_8q6z95x5/post_ecc.ini 2026-04-10 16:57:22,935 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8q6z95x5/solo_L1_stix-cal-energy_20250117_V03U_ecc_in.fits 2026-04-10 17:06:56,937 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250117_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250117_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250117_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250117_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 17:07:03,341 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 17:07:03,349 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8q6z95x5 2026-04-10 17:07:03,386 Soop found: SOOP 2026-04-10 17:07:03,496 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/17/CAL/solo_CAL_stix-cal-energy_20250117T042122-20250118T042122_V02.fits 2026-04-10 17:07:03,684 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zfcjpsli 2026-04-10 17:07:03,685 Read config from in: /tmp/ecc_context_ecc_cfg_1_zfcjpsli/post_ecc.ini 2026-04-10 17:07:04,933 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zfcjpsli/solo_L1_stix-cal-energy_20250131_V03U_ecc_in.fits 2026-04-10 17:16:48,413 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250131_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250131_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250131_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250131_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 17:16:54,760 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 17:16:54,768 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zfcjpsli 2026-04-10 17:16:54,797 Soop found: SOOP 2026-04-10 17:16:54,894 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/31/CAL/solo_CAL_stix-cal-energy_20250131T055905-20250201T062251_V02.fits 2026-04-10 17:16:55,062 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4m90pxad 2026-04-10 17:16:55,063 Read config from in: /tmp/ecc_context_ecc_cfg_1_4m90pxad/post_ecc.ini 2026-04-10 17:16:56,318 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4m90pxad/solo_L1_stix-cal-energy_20250118_V03U_ecc_in.fits 2026-04-10 17:26:26,088 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250118_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250118_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250118_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250118_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 17:26:32,512 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 17:26:32,519 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4m90pxad 2026-04-10 17:26:32,555 Soop found: SOOP 2026-04-10 17:26:32,655 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/18/CAL/solo_CAL_stix-cal-energy_20250118T042128-20250119T042128_V02.fits 2026-04-10 17:26:32,834 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7d80la2f 2026-04-10 17:26:32,835 Read config from in: /tmp/ecc_context_ecc_cfg_1_7d80la2f/post_ecc.ini 2026-04-10 17:26:34,082 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7d80la2f/solo_L1_stix-cal-energy_20250123_V03U_ecc_in.fits 2026-04-10 17:36:14,298 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250123_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250123_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 17:36:20,656 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 17:36:20,663 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7d80la2f 2026-04-10 17:36:20,692 Soop found: SOOP 2026-04-10 17:36:20,789 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/23/CAL/solo_CAL_stix-cal-energy_20250123T050344-20250124T050343_V02.fits 2026-04-10 17:36:20,957 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y48rv45b 2026-04-10 17:36:20,957 Read config from in: /tmp/ecc_context_ecc_cfg_1_y48rv45b/post_ecc.ini 2026-04-10 17:36:23,840 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y48rv45b/solo_L1_stix-cal-energy_20250116_V03U_ecc_in.fits 2026-04-10 17:45:49,555 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250116_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250116_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 17:45:55,902 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 17:45:55,911 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y48rv45b 2026-04-10 17:45:55,950 Soop found: SOOP 2026-04-10 17:45:56,048 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/16/CAL/solo_CAL_stix-cal-energy_20250116T042116-20250117T042116_V02.fits 2026-04-10 17:45:56,226 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uu_e4zyd 2026-04-10 17:45:56,226 Read config from in: /tmp/ecc_context_ecc_cfg_1_uu_e4zyd/post_ecc.ini 2026-04-10 17:45:57,477 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uu_e4zyd/solo_L1_stix-cal-energy_20250121_V03U_ecc_in.fits 2026-04-10 17:55:40,459 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250121_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250121_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 17:55:46,875 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 17:55:46,883 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uu_e4zyd 2026-04-10 17:55:46,916 Soop found: SOOP 2026-04-10 17:55:47,016 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/21/CAL/solo_CAL_stix-cal-energy_20250121T050332-20250122T050331_V02.fits 2026-04-10 17:55:47,189 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p_jl9_6c 2026-04-10 17:55:47,190 Read config from in: /tmp/ecc_context_ecc_cfg_1_p_jl9_6c/post_ecc.ini 2026-04-10 17:55:48,436 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p_jl9_6c/solo_L1_stix-cal-energy_20250112_V03U_ecc_in.fits 2026-04-10 18:05:11,298 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250112_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250112_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250112_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250112_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 18:05:17,621 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 18:05:17,628 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p_jl9_6c 2026-04-10 18:05:17,666 Soop found: SOOP 2026-04-10 18:05:17,666 Soop found: SOOP 2026-04-10 18:05:17,762 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/12/CAL/solo_CAL_stix-cal-energy_20250112T032549-20250113T033636_V02.fits 2026-04-10 18:05:17,927 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nvd0b2z0 2026-04-10 18:05:17,927 Read config from in: /tmp/ecc_context_ecc_cfg_1_nvd0b2z0/post_ecc.ini 2026-04-10 18:05:19,176 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nvd0b2z0/solo_L1_stix-cal-energy_20250127_V03U_ecc_in.fits 2026-04-10 18:14:57,171 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250127_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250127_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250127_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250127_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 18:15:03,602 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 18:15:03,609 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nvd0b2z0 2026-04-10 18:15:03,638 Soop found: SOOP 2026-04-10 18:15:03,741 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/27/CAL/solo_CAL_stix-cal-energy_20250127T055840-20250128T055839_V02.fits 2026-04-10 18:15:03,922 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_joshholz 2026-04-10 18:15:03,923 Read config from in: /tmp/ecc_context_ecc_cfg_1_joshholz/post_ecc.ini 2026-04-10 18:15:05,181 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_joshholz/solo_L1_stix-cal-energy_20250111_V03U_ecc_in.fits 2026-04-10 18:24:28,302 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250111_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250111_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250111_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250111_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 18:24:34,630 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 18:24:34,640 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_joshholz 2026-04-10 18:24:34,672 Soop found: SOOP 2026-04-10 18:24:34,770 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/11/CAL/solo_CAL_stix-cal-energy_20250111T032543-20250112T032542_V02.fits 2026-04-10 18:24:34,940 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zy2xqms2 2026-04-10 18:24:34,941 Read config from in: /tmp/ecc_context_ecc_cfg_1_zy2xqms2/post_ecc.ini 2026-04-10 18:24:36,192 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zy2xqms2/solo_L1_stix-cal-energy_20250126_V03U_ecc_in.fits 2026-04-10 18:34:04,738 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250126_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250126_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250126_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250126_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 18:34:12,889 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 18:34:12,896 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zy2xqms2 2026-04-10 18:34:12,921 Soop found: SOOP 2026-04-10 18:34:12,921 Soop found: SOOP 2026-04-10 18:34:13,015 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/26/CAL/solo_CAL_stix-cal-energy_20250126T050402-20250127T053536_V02.fits 2026-04-10 18:34:13,193 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_s7np6fee 2026-04-10 18:34:13,193 Read config from in: /tmp/ecc_context_ecc_cfg_1_s7np6fee/post_ecc.ini 2026-04-10 18:34:14,435 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_s7np6fee/solo_L1_stix-cal-energy_20250119_V03U_ecc_in.fits 2026-04-10 18:43:43,721 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250119_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250119_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250119_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250119_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 18:43:50,028 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 18:43:50,037 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_s7np6fee 2026-04-10 18:43:50,074 Soop found: SOOP 2026-04-10 18:43:50,074 Soop found: SOOP 2026-04-10 18:43:50,075 Soop found: SOOP 2026-04-10 18:43:50,174 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/19/CAL/solo_CAL_stix-cal-energy_20250119T042135-20250120T042416_V02.fits 2026-04-10 18:43:50,347 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2awpu_4w 2026-04-10 18:43:50,347 Read config from in: /tmp/ecc_context_ecc_cfg_1_2awpu_4w/post_ecc.ini 2026-04-10 18:43:51,611 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2awpu_4w/solo_L1_stix-cal-energy_20250122_V03U_ecc_in.fits 2026-04-10 18:53:23,310 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250122_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250122_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 18:53:29,698 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 18:53:29,709 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2awpu_4w 2026-04-10 18:53:29,760 Soop found: SOOP 2026-04-10 18:53:29,907 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/22/CAL/solo_CAL_stix-cal-energy_20250122T050338-20250123T050338_V02.fits 2026-04-10 18:53:30,081 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2a2pby3q 2026-04-10 18:53:30,082 Read config from in: /tmp/ecc_context_ecc_cfg_1_2a2pby3q/post_ecc.ini 2026-04-10 18:53:31,316 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2a2pby3q/solo_L1_stix-cal-energy_20250125_V03U_ecc_in.fits 2026-04-10 19:03:02,316 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250125_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250125_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 19:03:08,704 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 19:03:08,712 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2a2pby3q 2026-04-10 19:03:08,741 Soop found: SOOP 2026-04-10 19:03:08,841 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/25/CAL/solo_CAL_stix-cal-energy_20250125T050356-20250126T050356_V02.fits 2026-04-10 19:03:09,018 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vicipjiu 2026-04-10 19:03:09,019 Read config from in: /tmp/ecc_context_ecc_cfg_1_vicipjiu/post_ecc.ini 2026-04-10 19:03:10,272 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vicipjiu/solo_L1_stix-cal-energy_20250128_V03U_ecc_in.fits 2026-04-10 19:12:49,494 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250128_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250128_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250128_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250128_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 19:12:55,959 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 19:12:55,966 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vicipjiu 2026-04-10 19:12:55,998 Soop found: SOOP 2026-04-10 19:12:56,095 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/28/CAL/solo_CAL_stix-cal-energy_20250128T055846-20250129T055845_V02.fits 2026-04-10 19:12:56,262 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kjairn7k 2026-04-10 19:12:56,263 Read config from in: /tmp/ecc_context_ecc_cfg_1_kjairn7k/post_ecc.ini 2026-04-10 19:12:57,512 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kjairn7k/solo_L1_stix-cal-energy_20250109_V03U_ecc_in.fits 2026-04-10 19:22:20,777 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250109_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250109_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250109_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250109_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 19:22:27,206 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 19:22:27,213 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kjairn7k 2026-04-10 19:22:27,249 Soop found: SOOP 2026-04-10 19:22:27,347 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/09/CAL/solo_CAL_stix-cal-energy_20250109T032528-20250110T032528_V02.fits 2026-04-10 19:22:27,515 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o8461fmx 2026-04-10 19:22:27,515 Read config from in: /tmp/ecc_context_ecc_cfg_1_o8461fmx/post_ecc.ini 2026-04-10 19:22:28,765 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o8461fmx/solo_L1_stix-cal-energy_20250129_V03U_ecc_in.fits 2026-04-10 19:31:57,050 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250129_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250129_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250129_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250129_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 19:32:04,942 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 19:32:04,949 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o8461fmx 2026-04-10 19:32:04,974 Soop found: SOOP 2026-04-10 19:32:05,068 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/29/CAL/solo_CAL_stix-cal-energy_20250129T055852-20250130T055851_V02.fits 2026-04-10 19:32:05,245 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x4t7fxv9 2026-04-10 19:32:05,245 Read config from in: /tmp/ecc_context_ecc_cfg_1_x4t7fxv9/post_ecc.ini 2026-04-10 19:32:06,483 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x4t7fxv9/solo_L1_stix-cal-energy_20250102_V03U_ecc_in.fits 2026-04-10 19:41:41,119 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250102_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250102_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250102_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250102_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 19:41:47,431 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 19:41:47,442 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x4t7fxv9 2026-04-10 19:41:47,472 Soop found: SOOP 2026-04-10 19:41:47,571 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/02/CAL/solo_CAL_stix-cal-energy_20250102T031550-20250103T031550_V02.fits 2026-04-10 19:41:47,743 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_066m5x_i 2026-04-10 19:41:47,744 Read config from in: /tmp/ecc_context_ecc_cfg_1_066m5x_i/post_ecc.ini 2026-04-10 19:41:48,988 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_066m5x_i/solo_L1_stix-cal-energy_20250113_V03U_ecc_in.fits 2026-04-10 19:51:12,203 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250113_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250113_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250113_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250113_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 19:51:18,626 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 19:51:18,633 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_066m5x_i 2026-04-10 19:51:18,662 Soop found: SOOP 2026-04-10 19:51:18,763 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/13/CAL/solo_CAL_stix-cal-energy_20250113T042059-20250114T042058_V02.fits 2026-04-10 19:51:18,947 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a0th3e82 2026-04-10 19:51:18,948 Read config from in: /tmp/ecc_context_ecc_cfg_1_a0th3e82/post_ecc.ini 2026-04-10 19:51:20,203 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a0th3e82/solo_L1_stix-cal-energy_20250115_V03U_ecc_in.fits 2026-04-10 20:00:49,162 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250115_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250115_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 20:00:55,505 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 20:00:55,512 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a0th3e82 2026-04-10 20:00:55,540 Soop found: SOOP 2026-04-10 20:00:55,636 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/15/CAL/solo_CAL_stix-cal-energy_20250115T042110-20250116T042110_V02.fits 2026-04-10 20:00:55,804 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_smr10ugo 2026-04-10 20:00:55,805 Read config from in: /tmp/ecc_context_ecc_cfg_1_smr10ugo/post_ecc.ini 2026-04-10 20:00:57,048 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_smr10ugo/solo_L1_stix-cal-energy_20250104_V03U_ecc_in.fits 2026-04-10 20:10:19,129 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250104_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250104_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250104_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250104_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 20:10:25,816 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 20:10:25,823 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_smr10ugo 2026-04-10 20:10:25,851 Soop found: SOOP 2026-04-10 20:10:25,946 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/01/04/CAL/solo_CAL_stix-cal-energy_20250104T031705-20250105T031705_V02.fits 2026-04-10 20:10:26,113 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w7tx3k9j 2026-04-10 20:10:26,113 Read config from in: /tmp/ecc_context_ecc_cfg_1_w7tx3k9j/post_ecc.ini 2026-04-10 20:10:27,367 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w7tx3k9j/solo_L1_stix-cal-energy_20250830_V03U_ecc_in.fits 2026-04-10 20:20:24,241 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250830_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250830_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250830_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250830_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 20:20:30,586 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 20:20:30,593 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_w7tx3k9j 2026-04-10 20:20:30,624 Soop found: SOOP 2026-04-10 20:20:30,736 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/30/CAL/solo_CAL_stix-cal-energy_20250830T024245-20250831T024246_V02.fits 2026-04-10 20:20:30,909 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lzze59nk 2026-04-10 20:20:30,909 Read config from in: /tmp/ecc_context_ecc_cfg_1_lzze59nk/post_ecc.ini 2026-04-10 20:20:33,687 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lzze59nk/solo_L1_stix-cal-energy_20250810_V03U_ecc_in.fits 2026-04-10 20:30:05,984 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250810_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250810_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250810_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250810_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 20:30:12,307 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 20:30:12,314 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lzze59nk 2026-04-10 20:30:12,344 Soop found: SOOP 2026-04-10 20:30:12,344 Soop found: SOOP 2026-04-10 20:30:12,450 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/10/CAL/solo_CAL_stix-cal-energy_20250810T045427-20250811T063214_V02.fits 2026-04-10 20:30:12,618 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r42q0ybk 2026-04-10 20:30:12,619 Read config from in: /tmp/ecc_context_ecc_cfg_1_r42q0ybk/post_ecc.ini 2026-04-10 20:30:13,855 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r42q0ybk/solo_L1_stix-cal-energy_20250801_V03U_ecc_in.fits 2026-04-10 20:39:58,472 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250801_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250801_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250801_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250801_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 20:40:04,912 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 20:40:04,920 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r42q0ybk 2026-04-10 20:40:04,967 Soop found: SOOP 2026-04-10 20:40:05,076 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/01/CAL/solo_CAL_stix-cal-energy_20250801T024721-20250802T024721_V02.fits 2026-04-10 20:40:05,247 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sxwcpipf 2026-04-10 20:40:05,247 Read config from in: /tmp/ecc_context_ecc_cfg_1_sxwcpipf/post_ecc.ini 2026-04-10 20:40:06,483 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sxwcpipf/solo_L1_stix-cal-energy_20250824_V03U_ecc_in.fits 2026-04-10 20:49:41,651 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250824_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250824_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250824_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250824_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 20:49:48,030 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-10 20:49:48,037 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sxwcpipf 2026-04-10 20:49:48,064 Soop found: SOOP 2026-04-10 20:49:48,064 Soop found: SOOP 2026-04-10 20:49:48,164 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/24/CAL/solo_CAL_stix-cal-energy_20250824T112521-20250825T120353_V02.fits 2026-04-10 20:49:48,329 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k0d9t6cx 2026-04-10 20:49:48,330 Read config from in: /tmp/ecc_context_ecc_cfg_1_k0d9t6cx/post_ecc.ini 2026-04-10 20:49:49,580 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k0d9t6cx/solo_L1_stix-cal-energy_20250808_V03U_ecc_in.fits 2026-04-10 20:59:18,201 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250808_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250808_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250808_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250808_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 20:59:24,529 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 20:59:24,536 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k0d9t6cx 2026-04-10 20:59:24,564 Soop found: SOOP 2026-04-10 20:59:24,665 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/08/CAL/solo_CAL_stix-cal-energy_20250808T045415-20250809T045414_V02.fits 2026-04-10 20:59:24,847 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rx1r5zv6 2026-04-10 20:59:24,847 Read config from in: /tmp/ecc_context_ecc_cfg_1_rx1r5zv6/post_ecc.ini 2026-04-10 20:59:26,093 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rx1r5zv6/solo_L1_stix-cal-energy_20250805_V03U_ecc_in.fits 2026-04-10 21:08:50,598 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250805_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250805_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250805_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250805_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 21:08:56,860 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 21:08:56,867 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rx1r5zv6 2026-04-10 21:08:56,894 Soop found: SOOP 2026-04-10 21:08:56,990 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/05/CAL/solo_CAL_stix-cal-energy_20250805T042120-20250806T042354_V02.fits 2026-04-10 21:08:57,150 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fvuh3ebh 2026-04-10 21:08:57,151 Read config from in: /tmp/ecc_context_ecc_cfg_1_fvuh3ebh/post_ecc.ini 2026-04-10 21:08:58,393 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fvuh3ebh/solo_L1_stix-cal-energy_20250814_V03U_ecc_in.fits 2026-04-10 21:18:19,776 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250814_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250814_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250814_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250814_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 21:18:26,150 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 21:18:26,156 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fvuh3ebh 2026-04-10 21:18:26,186 Soop found: SOOP 2026-04-10 21:18:26,282 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/14/CAL/solo_CAL_stix-cal-energy_20250814T085920-20250815T085919_V02.fits 2026-04-10 21:18:26,444 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hashfoqf 2026-04-10 21:18:26,444 Read config from in: /tmp/ecc_context_ecc_cfg_1_hashfoqf/post_ecc.ini 2026-04-10 21:18:29,144 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hashfoqf/solo_L1_stix-cal-energy_20250807_V03U_ecc_in.fits 2026-04-10 21:27:48,097 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250807_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250807_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250807_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250807_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 21:27:54,420 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 21:27:54,427 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hashfoqf 2026-04-10 21:27:54,452 Soop found: SOOP 2026-04-10 21:27:54,547 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/07/CAL/solo_CAL_stix-cal-energy_20250807T045409-20250808T045409_V02.fits 2026-04-10 21:27:54,717 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m5cqonht 2026-04-10 21:27:54,718 Read config from in: /tmp/ecc_context_ecc_cfg_1_m5cqonht/post_ecc.ini 2026-04-10 21:27:55,979 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m5cqonht/solo_L1_stix-cal-energy_20250820_V03U_ecc_in.fits 2026-04-10 21:38:02,902 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250820_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250820_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250820_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250820_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 21:38:09,948 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 21:38:09,956 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m5cqonht 2026-04-10 21:38:09,987 Soop found: SOOP 2026-04-10 21:38:10,093 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/20/CAL/solo_CAL_stix-cal-energy_20250820T110659-20250821T110659_V02.fits 2026-04-10 21:38:10,272 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ywsdf2zj 2026-04-10 21:38:10,272 Read config from in: /tmp/ecc_context_ecc_cfg_1_ywsdf2zj/post_ecc.ini 2026-04-10 21:38:11,538 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ywsdf2zj/solo_L1_stix-cal-energy_20250806_V03U_ecc_in.fits 2026-04-10 21:47:29,852 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250806_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250806_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250806_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250806_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 21:47:36,210 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 21:47:36,217 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ywsdf2zj 2026-04-10 21:47:36,246 Soop found: SOOP 2026-04-10 21:47:36,343 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/06/CAL/solo_CAL_stix-cal-energy_20250806T045403-20250807T045402_V02.fits 2026-04-10 21:47:36,516 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oneerz9g 2026-04-10 21:47:36,516 Read config from in: /tmp/ecc_context_ecc_cfg_1_oneerz9g/post_ecc.ini 2026-04-10 21:47:37,790 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oneerz9g/solo_L1_stix-cal-energy_20250803_V03U_ecc_in.fits 2026-04-10 21:57:12,767 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250803_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250803_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250803_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250803_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 21:57:19,075 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 21:57:19,089 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oneerz9g 2026-04-10 21:57:19,123 Soop found: SOOP 2026-04-10 21:57:19,123 Soop found: SOOP 2026-04-10 21:57:19,227 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/03/CAL/solo_CAL_stix-cal-energy_20250803T024733-20250804T030810_V02.fits 2026-04-10 21:57:19,407 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tmel6um_ 2026-04-10 21:57:19,407 Read config from in: /tmp/ecc_context_ecc_cfg_1_tmel6um_/post_ecc.ini 2026-04-10 21:57:20,647 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tmel6um_/solo_L1_stix-cal-energy_20250817_V03U_ecc_in.fits 2026-04-10 22:07:08,272 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250817_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250817_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250817_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250817_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 22:07:14,616 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 22:07:14,624 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tmel6um_ 2026-04-10 22:07:14,650 Soop found: SOOP 2026-04-10 22:07:14,650 Soop found: SOOP 2026-04-10 22:07:14,745 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/17/CAL/solo_CAL_stix-cal-energy_20250817T085937-20250818T094115_V02.fits 2026-04-10 22:07:14,912 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hws4ufya 2026-04-10 22:07:14,913 Read config from in: /tmp/ecc_context_ecc_cfg_1_hws4ufya/post_ecc.ini 2026-04-10 22:07:16,162 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hws4ufya/solo_L1_stix-cal-energy_20250831_V03U_ecc_in.fits 2026-04-10 22:17:06,382 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250831_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250831_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250831_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250831_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 22:17:12,891 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 22:17:12,899 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hws4ufya 2026-04-10 22:17:12,942 Soop found: SOOP 2026-04-10 22:17:12,942 Soop found: SOOP 2026-04-10 22:17:13,064 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/31/CAL/solo_CAL_stix-cal-energy_20250831T024253-20250901T024252_V02.fits 2026-04-10 22:17:14,645 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dqxbd3ob 2026-04-10 22:17:14,646 Read config from in: /tmp/ecc_context_ecc_cfg_1_dqxbd3ob/post_ecc.ini 2026-04-10 22:17:15,885 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dqxbd3ob/solo_L1_stix-cal-energy_20250818_V03U_ecc_in.fits 2026-04-10 22:26:55,241 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250818_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250818_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250818_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250818_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 22:27:01,487 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 22:27:01,495 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dqxbd3ob 2026-04-10 22:27:01,524 Soop found: SOOP 2026-04-10 22:27:01,623 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/18/CAL/solo_CAL_stix-cal-energy_20250818T094121-20250819T094122_V02.fits 2026-04-10 22:27:01,799 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hcmj1wvt 2026-04-10 22:27:01,800 Read config from in: /tmp/ecc_context_ecc_cfg_1_hcmj1wvt/post_ecc.ini 2026-04-10 22:27:03,030 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hcmj1wvt/solo_L1_stix-cal-energy_20250823_V03U_ecc_in.fits 2026-04-10 22:36:51,588 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250823_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250823_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250823_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250823_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 22:36:58,070 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-10 22:36:58,073 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 22:36:58,080 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hcmj1wvt 2026-04-10 22:36:58,107 Soop found: SOOP 2026-04-10 22:36:58,204 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/23/CAL/solo_CAL_stix-cal-energy_20250823T112515-20250824T112514_V02.fits 2026-04-10 22:36:58,381 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6s0bkm36 2026-04-10 22:36:58,381 Read config from in: /tmp/ecc_context_ecc_cfg_1_6s0bkm36/post_ecc.ini 2026-04-10 22:36:59,611 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6s0bkm36/solo_L1_stix-cal-energy_20250816_V03U_ecc_in.fits 2026-04-10 22:46:44,065 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250816_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250816_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250816_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250816_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 22:46:50,342 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 22:46:50,349 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6s0bkm36 2026-04-10 22:46:50,375 Soop found: SOOP 2026-04-10 22:46:50,469 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/16/CAL/solo_CAL_stix-cal-energy_20250816T085931-20250817T085931_V02.fits 2026-04-10 22:46:50,639 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0tt9ftz6 2026-04-10 22:46:50,639 Read config from in: /tmp/ecc_context_ecc_cfg_1_0tt9ftz6/post_ecc.ini 2026-04-10 22:46:51,881 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0tt9ftz6/solo_L1_stix-cal-energy_20250821_V03U_ecc_in.fits 2026-04-10 23:04:28,355 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250821_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250821_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250821_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250821_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 pixel 108 is dead pixel 115 is dead starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 23:04:47,134 Run ecc post fit: replaced [89.3 %] gain offset pairs with 'better fits' 2026-04-10 23:04:47,143 ECC result Gain_Prime 1.6152529721220878 for DET 4 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-04-10 23:04:47,144 ECC result Gain_Prime 1.6170848724812346 for DET 5 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-10 23:04:47,144 ECC result Gain_Prime 1.6159643800184833 for DET 6 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-10 23:04:47,144 ECC result Gain_Prime 1.6152628849288324 for DET 16 PIX 5 exceeds Max_Gain 1.4, but not in ignore list 2026-04-10 23:04:47,144 ECC result Gain_Prime 1.615258822534976 for DET 16 PIX 7 exceeds Max_Gain 1.4, but not in ignore list 2026-04-10 23:04:47,144 ECC result Gain_Prime 1.6137383750749934 for DET 29 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-10 23:04:47,144 ECC result Gain_Prime 0.0 for DET 6 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 7 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 9 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 9 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 13 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 13 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 13 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 14 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 16 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,145 ECC result Gain_Prime 0.0 for DET 16 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 16 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 17 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 18 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 20 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 21 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 23 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 23 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 23 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,146 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 24 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 24 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 24 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 26 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 26 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 27 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 28 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 29 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 30 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,147 ECC result Gain_Prime 0.0 for DET 30 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,148 ECC result Gain_Prime 0.0 for DET 30 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,148 ECC result Gain_Prime 0.0 for DET 31 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,148 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,148 ECC result Gain_Prime 0.0 for DET 32 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,148 ECC result Gain_Prime 0.0 for DET 32 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-10 23:04:47,148 ECC result Gain_Cor 0.0 for DET 10 PIX 0 falls below Min_Gain 0.4, but not in ignore list 2026-04-10 23:04:47,148 ECC result Gain_Cor 0.0 for DET 10 PIX 7 falls below Min_Gain 0.4, but not in ignore list 2026-04-10 23:04:47,156 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0tt9ftz6 2026-04-10 23:04:47,184 Soop found: SOOP 2026-04-10 23:04:47,288 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/21/CAL/solo_CAL_stix-cal-energy_20250821T110706-20250822T112503_V02.fits 2026-04-10 23:04:47,462 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dq4az8c1 2026-04-10 23:04:47,463 Read config from in: /tmp/ecc_context_ecc_cfg_1_dq4az8c1/post_ecc.ini 2026-04-10 23:04:48,710 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dq4az8c1/solo_L1_stix-cal-energy_20250812_V03U_ecc_in.fits 2026-04-10 23:14:14,050 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250812_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250812_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250812_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250812_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 23:14:20,396 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 23:14:20,403 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dq4az8c1 2026-04-10 23:14:20,431 Soop found: SOOP 2026-04-10 23:14:20,527 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/12/CAL/solo_CAL_stix-cal-energy_20250812T083058-20250813T083305_V02.fits 2026-04-10 23:14:20,699 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ws3gr93y 2026-04-10 23:14:20,699 Read config from in: /tmp/ecc_context_ecc_cfg_1_ws3gr93y/post_ecc.ini 2026-04-10 23:14:21,949 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ws3gr93y/solo_L1_stix-cal-energy_20250827_V03U_ecc_in.fits 2026-04-10 23:24:25,801 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250827_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250827_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250827_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250827_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 23:24:34,689 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 23:24:34,697 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ws3gr93y 2026-04-10 23:24:34,734 Soop found: SOOP 2026-04-10 23:24:34,846 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/27/CAL/solo_CAL_stix-cal-energy_20250827T002432-20250828T002431_V02.fits 2026-04-10 23:24:35,031 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fyt07hai 2026-04-10 23:24:35,032 Read config from in: /tmp/ecc_context_ecc_cfg_1_fyt07hai/post_ecc.ini 2026-04-10 23:24:36,308 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fyt07hai/solo_L1_stix-cal-energy_20250811_V03U_ecc_in.fits 2026-04-10 23:33:51,246 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250811_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250811_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250811_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250811_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 23:33:57,655 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 23:33:57,663 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fyt07hai 2026-04-10 23:33:57,690 Soop found: SOOP 2026-04-10 23:33:57,787 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/11/CAL/solo_CAL_stix-cal-energy_20250811T083052-20250812T083052_V02.fits 2026-04-10 23:33:57,976 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fo0tfhrf 2026-04-10 23:33:57,977 Read config from in: /tmp/ecc_context_ecc_cfg_1_fo0tfhrf/post_ecc.ini 2026-04-10 23:33:59,207 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fo0tfhrf/solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits 2026-04-10 23:43:40,962 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 23:43:47,388 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 23:43:47,395 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fo0tfhrf 2026-04-10 23:43:47,430 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_03er013s 2026-04-10 23:43:47,431 Read config from in: /tmp/ecc_context_ecc_cfg_1_03er013s/post_ecc.ini 2026-04-10 23:43:48,688 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_03er013s/solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits 2026-04-10 23:53:09,593 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250826_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-10 23:53:16,095 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-10 23:53:16,102 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_03er013s 2026-04-10 23:53:16,139 Soop found: SOOP 2026-04-10 23:53:16,256 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/26/CAL/solo_CAL_stix-cal-energy_20250825T123758-20250826T123758_V02.fits 2026-04-10 23:53:16,294 Soop found: SOOP 2026-04-10 23:53:16,389 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/26/CAL/solo_CAL_stix-cal-energy_20250826T123804-20250827T000002_V02.fits 2026-04-10 23:53:16,588 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ro_v6yan 2026-04-10 23:53:16,589 Read config from in: /tmp/ecc_context_ecc_cfg_1_ro_v6yan/post_ecc.ini 2026-04-10 23:53:17,820 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ro_v6yan/solo_L1_stix-cal-energy_20250819_V03U_ecc_in.fits 2026-04-11 00:03:01,864 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250819_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250819_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250819_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250819_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 00:03:08,475 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 00:03:08,483 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ro_v6yan 2026-04-11 00:03:08,511 Soop found: SOOP 2026-04-11 00:03:08,606 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/19/CAL/solo_CAL_stix-cal-energy_20250819T094128-20250820T100419_V02.fits 2026-04-11 00:03:08,785 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a15st4kf 2026-04-11 00:03:08,786 Read config from in: /tmp/ecc_context_ecc_cfg_1_a15st4kf/post_ecc.ini 2026-04-11 00:03:10,065 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a15st4kf/solo_L1_stix-cal-energy_20250822_V03U_ecc_in.fits 2026-04-11 00:15:46,200 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250822_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250822_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250822_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250822_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 00:15:52,883 Run ecc post fit: replaced [99.2 %] gain offset pairs with 'better fits' 2026-04-11 00:15:52,885 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 00:15:52,885 ECC result Gain_Prime 0.0 for DET 2 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 00:15:52,886 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 00:15:52,891 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a15st4kf 2026-04-11 00:15:52,921 Soop found: SOOP 2026-04-11 00:15:53,018 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/22/CAL/solo_CAL_stix-cal-energy_20250822T112509-20250823T112509_V02.fits 2026-04-11 00:15:53,184 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qjgjafha 2026-04-11 00:15:53,185 Read config from in: /tmp/ecc_context_ecc_cfg_1_qjgjafha/post_ecc.ini 2026-04-11 00:15:54,432 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qjgjafha/solo_L1_stix-cal-energy_20250828_V03U_ecc_in.fits 2026-04-11 00:25:36,083 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250828_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250828_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250828_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250828_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 00:25:44,035 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 00:25:44,041 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qjgjafha 2026-04-11 00:25:44,066 Soop found: SOOP 2026-04-11 00:25:44,160 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/28/CAL/solo_CAL_stix-cal-energy_20250828T002438-20250829T004405_V02.fits 2026-04-11 00:25:44,329 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4ec2n2v9 2026-04-11 00:25:44,329 Read config from in: /tmp/ecc_context_ecc_cfg_1_4ec2n2v9/post_ecc.ini 2026-04-11 00:25:45,580 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4ec2n2v9/solo_L1_stix-cal-energy_20250809_V03U_ecc_in.fits 2026-04-11 00:35:07,421 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250809_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250809_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250809_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250809_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 00:35:13,814 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 00:35:13,821 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4ec2n2v9 2026-04-11 00:35:13,852 Soop found: SOOP 2026-04-11 00:35:13,947 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/09/CAL/solo_CAL_stix-cal-energy_20250809T045421-20250810T045421_V02.fits 2026-04-11 00:35:14,115 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3ku3sjoh 2026-04-11 00:35:14,116 Read config from in: /tmp/ecc_context_ecc_cfg_1_3ku3sjoh/post_ecc.ini 2026-04-11 00:35:15,357 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3ku3sjoh/solo_L1_stix-cal-energy_20250829_V03U_ecc_in.fits 2026-04-11 00:44:51,866 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250829_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250829_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250829_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250829_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 00:44:58,217 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 00:44:58,224 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3ku3sjoh 2026-04-11 00:44:58,254 Soop found: SOOP 2026-04-11 00:44:58,350 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/29/CAL/solo_CAL_stix-cal-energy_20250829T022858-20250830T022930_V02.fits 2026-04-11 00:44:58,523 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zvn4oj2l 2026-04-11 00:44:58,523 Read config from in: /tmp/ecc_context_ecc_cfg_1_zvn4oj2l/post_ecc.ini 2026-04-11 00:44:59,766 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zvn4oj2l/solo_L1_stix-cal-energy_20250802_V03U_ecc_in.fits 2026-04-11 00:54:36,722 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250802_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250802_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250802_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250802_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 00:54:43,140 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 00:54:43,152 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zvn4oj2l 2026-04-11 00:54:43,210 Soop found: SOOP 2026-04-11 00:54:43,322 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/02/CAL/solo_CAL_stix-cal-energy_20250802T024727-20250803T024727_V02.fits 2026-04-11 00:54:43,506 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rykqq04k 2026-04-11 00:54:43,506 Read config from in: /tmp/ecc_context_ecc_cfg_1_rykqq04k/post_ecc.ini 2026-04-11 00:54:44,739 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rykqq04k/solo_L1_stix-cal-energy_20250813_V03U_ecc_in.fits 2026-04-11 01:04:13,978 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250813_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250813_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250813_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250813_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 01:04:20,488 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 01:04:20,495 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rykqq04k 2026-04-11 01:04:20,524 Soop found: SOOP 2026-04-11 01:04:20,619 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/13/CAL/solo_CAL_stix-cal-energy_20250813T085914-20250814T085913_V02.fits 2026-04-11 01:04:20,784 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_to864ueb 2026-04-11 01:04:20,785 Read config from in: /tmp/ecc_context_ecc_cfg_1_to864ueb/post_ecc.ini 2026-04-11 01:04:22,038 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_to864ueb/solo_L1_stix-cal-energy_20250815_V03U_ecc_in.fits 2026-04-11 01:14:11,225 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250815_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250815_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250815_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250815_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 01:14:17,676 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 01:14:17,683 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_to864ueb 2026-04-11 01:14:17,711 Soop found: SOOP 2026-04-11 01:14:17,807 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/15/CAL/solo_CAL_stix-cal-energy_20250815T085926-20250816T085925_V02.fits 2026-04-11 01:14:17,984 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cdmx7czn 2026-04-11 01:14:17,985 Read config from in: /tmp/ecc_context_ecc_cfg_1_cdmx7czn/post_ecc.ini 2026-04-11 01:14:20,718 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cdmx7czn/solo_L1_stix-cal-energy_20250804_V03U_ecc_in.fits 2026-04-11 01:23:54,467 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250804_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250804_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250804_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250804_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 01:24:00,749 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 01:24:00,757 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cdmx7czn 2026-04-11 01:24:00,781 Soop found: SOOP 2026-04-11 01:24:00,880 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/08/04/CAL/solo_CAL_stix-cal-energy_20250804T042112-20250805T042111_V02.fits 2026-04-11 01:24:01,041 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bm06cwvc 2026-04-11 01:24:01,042 Read config from in: /tmp/ecc_context_ecc_cfg_1_bm06cwvc/post_ecc.ini 2026-04-11 01:24:02,275 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bm06cwvc/solo_L1_stix-cal-energy_20250530_V03U_ecc_in.fits 2026-04-11 01:33:35,296 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250530_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250530_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250530_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250530_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 01:33:41,596 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 01:33:41,603 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bm06cwvc 2026-04-11 01:33:41,633 Soop found: SOOP 2026-04-11 01:33:41,748 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/30/CAL/solo_CAL_stix-cal-energy_20250530T063441-20250531T065438_V02.fits 2026-04-11 01:33:41,935 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a0nnougd 2026-04-11 01:33:41,936 Read config from in: /tmp/ecc_context_ecc_cfg_1_a0nnougd/post_ecc.ini 2026-04-11 01:33:43,207 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a0nnougd/solo_L1_stix-cal-energy_20250510_V03U_ecc_in.fits 2026-04-11 01:43:38,736 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250510_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250510_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250510_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250510_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 01:43:45,018 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 01:43:45,025 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a0nnougd 2026-04-11 01:43:45,051 Soop found: SOOP 2026-04-11 01:43:45,051 Soop found: SOOP 2026-04-11 01:43:45,150 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/10/CAL/solo_CAL_stix-cal-energy_20250510T044742-20250511T044743_V02.fits 2026-04-11 01:43:45,315 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x2sngah5 2026-04-11 01:43:45,315 Read config from in: /tmp/ecc_context_ecc_cfg_1_x2sngah5/post_ecc.ini 2026-04-11 01:43:46,571 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x2sngah5/solo_L1_stix-cal-energy_20250501_V03U_ecc_in.fits 2026-04-11 01:53:17,738 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250501_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250501_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250501_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250501_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 01:53:24,205 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 01:53:24,214 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x2sngah5 2026-04-11 01:53:24,242 Soop found: SOOP 2026-04-11 01:53:24,345 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/01/CAL/solo_CAL_stix-cal-energy_20250501T031927-20250502T000002_V02.fits 2026-04-11 01:53:24,512 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mvxxvqbd 2026-04-11 01:53:24,512 Read config from in: /tmp/ecc_context_ecc_cfg_1_mvxxvqbd/post_ecc.ini 2026-04-11 01:53:25,773 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mvxxvqbd/solo_L1_stix-cal-energy_20250524_V03U_ecc_in.fits 2026-04-11 02:03:22,794 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250524_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250524_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250524_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250524_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 02:03:29,061 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 02:03:29,069 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mvxxvqbd 2026-04-11 02:03:29,097 Soop found: SOOP 2026-04-11 02:03:29,195 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/24/CAL/solo_CAL_stix-cal-energy_20250524T020800-20250525T020759_V02.fits 2026-04-11 02:03:29,365 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x_b7aus1 2026-04-11 02:03:29,366 Read config from in: /tmp/ecc_context_ecc_cfg_1_x_b7aus1/post_ecc.ini 2026-04-11 02:03:30,614 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x_b7aus1/solo_L1_stix-cal-energy_20250508_V03U_ecc_in.fits 2026-04-11 02:13:35,165 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250508_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250508_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250508_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250508_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 02:13:43,232 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 02:13:43,240 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x_b7aus1 2026-04-11 02:13:43,265 Soop found: SOOP 2026-04-11 02:13:43,365 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/08/CAL/solo_CAL_stix-cal-energy_20250508T044731-20250509T044730_V02.fits 2026-04-11 02:13:43,534 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8wb1uod3 2026-04-11 02:13:43,534 Read config from in: /tmp/ecc_context_ecc_cfg_1_8wb1uod3/post_ecc.ini 2026-04-11 02:13:44,758 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8wb1uod3/solo_L1_stix-cal-energy_20250505_V03U_ecc_in.fits 2026-04-11 02:23:37,391 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250505_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250505_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250505_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250505_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 02:23:43,720 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 02:23:43,727 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8wb1uod3 2026-04-11 02:23:43,757 Soop found: SOOP 2026-04-11 02:23:43,854 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/05/CAL/solo_CAL_stix-cal-energy_20250505T044708-20250506T044708_V02.fits 2026-04-11 02:23:44,033 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ghuzg8ju 2026-04-11 02:23:44,034 Read config from in: /tmp/ecc_context_ecc_cfg_1_ghuzg8ju/post_ecc.ini 2026-04-11 02:23:45,263 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ghuzg8ju/solo_L1_stix-cal-energy_20250514_V03U_ecc_in.fits 2026-04-11 02:33:38,224 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250514_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250514_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250514_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250514_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 02:33:44,546 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 02:33:44,555 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ghuzg8ju 2026-04-11 02:33:44,586 Soop found: SOOP 2026-04-11 02:33:44,587 Soop found: SOOP 2026-04-11 02:33:44,685 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/14/CAL/solo_CAL_stix-cal-energy_20250514T093520-20250515T101511_V02.fits 2026-04-11 02:33:44,845 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_asq_f3ou 2026-04-11 02:33:44,845 Read config from in: /tmp/ecc_context_ecc_cfg_1_asq_f3ou/post_ecc.ini 2026-04-11 02:33:46,085 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_asq_f3ou/solo_L1_stix-cal-energy_20250507_V03U_ecc_in.fits 2026-04-11 02:43:53,048 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250507_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250507_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250507_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250507_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 02:43:59,582 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 02:43:59,589 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_asq_f3ou 2026-04-11 02:43:59,626 Soop found: SOOP 2026-04-11 02:43:59,727 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/07/CAL/solo_CAL_stix-cal-energy_20250507T044725-20250508T044725_V02.fits 2026-04-11 02:43:59,899 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4_jpxbd0 2026-04-11 02:43:59,900 Read config from in: /tmp/ecc_context_ecc_cfg_1_4_jpxbd0/post_ecc.ini 2026-04-11 02:44:01,159 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4_jpxbd0/solo_L1_stix-cal-energy_20250520_V03U_ecc_in.fits 2026-04-11 02:53:53,891 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250520_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250520_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250520_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250520_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 02:54:00,478 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 02:54:00,488 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4_jpxbd0 2026-04-11 02:54:00,572 Soop found: SOOP 2026-04-11 02:54:00,698 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/20/CAL/solo_CAL_stix-cal-energy_20250520T002207-20250521T004809_V02.fits 2026-04-11 02:54:00,890 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ox9pzr4a 2026-04-11 02:54:00,892 Read config from in: /tmp/ecc_context_ecc_cfg_1_ox9pzr4a/post_ecc.ini 2026-04-11 02:54:02,136 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ox9pzr4a/solo_L1_stix-cal-energy_20250506_V03U_ecc_in.fits 2026-04-11 03:04:10,092 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250506_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250506_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250506_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250506_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 03:04:16,432 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 03:04:16,447 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ox9pzr4a 2026-04-11 03:04:16,477 Soop found: SOOP 2026-04-11 03:04:16,580 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/06/CAL/solo_CAL_stix-cal-energy_20250506T044719-20250507T044718_V02.fits 2026-04-11 03:04:16,752 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hzqddmn4 2026-04-11 03:04:16,753 Read config from in: /tmp/ecc_context_ecc_cfg_1_hzqddmn4/post_ecc.ini 2026-04-11 03:04:18,004 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hzqddmn4/solo_L1_stix-cal-energy_20250503_V03U_ecc_in.fits 2026-04-11 03:13:54,228 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250503_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250503_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250503_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250503_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 03:14:02,219 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 03:14:02,226 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hzqddmn4 2026-04-11 03:14:02,250 Soop found: SOOP 2026-04-11 03:14:02,345 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/03/CAL/solo_CAL_stix-cal-energy_20250503T000521-20250504T000521_V02.fits 2026-04-11 03:14:02,513 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bk1jt6ax 2026-04-11 03:14:02,513 Read config from in: /tmp/ecc_context_ecc_cfg_1_bk1jt6ax/post_ecc.ini 2026-04-11 03:14:03,751 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bk1jt6ax/solo_L1_stix-cal-energy_20250531_V03U_ecc_in.fits 2026-04-11 03:23:46,453 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250531_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250531_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250531_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250531_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 03:23:52,695 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 03:23:52,702 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bk1jt6ax 2026-04-11 03:23:52,730 Soop found: SOOP 2026-04-11 03:23:52,830 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/31/CAL/solo_CAL_stix-cal-energy_20250531T073726-20250601T073726_V02.fits 2026-04-11 03:23:53,012 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fo4rvzaf 2026-04-11 03:23:53,013 Read config from in: /tmp/ecc_context_ecc_cfg_1_fo4rvzaf/post_ecc.ini 2026-04-11 03:23:54,255 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fo4rvzaf/solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits 2026-04-11 03:33:42,468 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 03:33:48,818 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 03:33:48,825 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fo4rvzaf 2026-04-11 03:33:48,855 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jlnarhp8 2026-04-11 03:33:48,856 Read config from in: /tmp/ecc_context_ecc_cfg_1_jlnarhp8/post_ecc.ini 2026-04-11 03:33:50,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jlnarhp8/solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits 2026-04-11 03:43:14,701 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250518_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 03:43:21,014 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 03:43:21,021 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jlnarhp8 2026-04-11 03:43:21,059 Soop found: SOOP 2026-04-11 03:43:21,158 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/18/CAL/solo_CAL_stix-cal-energy_20250517T122554-20250518T122553_V02.fits 2026-04-11 03:43:21,194 Soop found: SOOP 2026-04-11 03:43:21,194 Soop found: SOOP 2026-04-11 03:43:21,287 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/18/CAL/solo_CAL_stix-cal-energy_20250518T122600-20250519T000002_V02.fits 2026-04-11 03:43:21,453 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__hrgtzty 2026-04-11 03:43:21,454 Read config from in: /tmp/ecc_context_ecc_cfg_1__hrgtzty/post_ecc.ini 2026-04-11 03:43:22,695 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__hrgtzty/solo_L1_stix-cal-energy_20250523_V03U_ecc_in.fits 2026-04-11 03:53:19,028 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250523_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250523_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250523_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250523_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 03:53:25,328 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 03:53:25,334 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__hrgtzty 2026-04-11 03:53:25,363 Soop found: SOOP 2026-04-11 03:53:25,460 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/23/CAL/solo_CAL_stix-cal-energy_20250523T014122-20250524T014241_V02.fits 2026-04-11 03:53:25,627 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8ex72v3g 2026-04-11 03:53:25,627 Read config from in: /tmp/ecc_context_ecc_cfg_1_8ex72v3g/post_ecc.ini 2026-04-11 03:53:26,884 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8ex72v3g/solo_L1_stix-cal-energy_20250516_V03U_ecc_in.fits 2026-04-11 04:03:14,103 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250516_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250516_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250516_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250516_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 04:03:20,438 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 04:03:20,445 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8ex72v3g 2026-04-11 04:03:20,474 Soop found: SOOP 2026-04-11 04:03:20,571 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/16/CAL/solo_CAL_stix-cal-energy_20250516T112741-20250517T112759_V02.fits 2026-04-11 04:03:20,738 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gj095yk2 2026-04-11 04:03:20,738 Read config from in: /tmp/ecc_context_ecc_cfg_1_gj095yk2/post_ecc.ini 2026-04-11 04:03:23,476 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gj095yk2/solo_L1_stix-cal-energy_20250521_V03U_ecc_in.fits 2026-04-11 04:13:30,070 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250521_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250521_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250521_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250521_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 04:13:36,361 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 04:13:36,369 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gj095yk2 2026-04-11 04:13:36,407 Soop found: SOOP 2026-04-11 04:13:36,509 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/21/CAL/solo_CAL_stix-cal-energy_20250521T012121-20250522T013459_V02.fits 2026-04-11 04:13:36,682 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_479q2uzl 2026-04-11 04:13:36,683 Read config from in: /tmp/ecc_context_ecc_cfg_1_479q2uzl/post_ecc.ini 2026-04-11 04:13:37,912 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_479q2uzl/solo_L1_stix-cal-energy_20250512_V03U_ecc_in.fits 2026-04-11 04:23:40,809 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250512_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250512_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250512_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250512_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 04:23:47,111 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 04:23:47,118 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_479q2uzl 2026-04-11 04:23:47,145 Soop found: SOOP 2026-04-11 04:23:47,245 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/12/CAL/solo_CAL_stix-cal-energy_20250512T093508-20250513T093507_V02.fits 2026-04-11 04:23:47,413 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y9erxu8a 2026-04-11 04:23:47,414 Read config from in: /tmp/ecc_context_ecc_cfg_1_y9erxu8a/post_ecc.ini 2026-04-11 04:23:48,661 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y9erxu8a/solo_L1_stix-cal-energy_20250527_V03U_ecc_in.fits 2026-04-11 04:33:15,772 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250527_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250527_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250527_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250527_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 04:33:22,162 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 04:33:22,169 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y9erxu8a 2026-04-11 04:33:22,197 Soop found: SOOP 2026-04-11 04:33:22,295 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/27/CAL/solo_CAL_stix-cal-energy_20250527T042400-20250528T042400_V02.fits 2026-04-11 04:33:22,478 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9qbi3q63 2026-04-11 04:33:22,479 Read config from in: /tmp/ecc_context_ecc_cfg_1_9qbi3q63/post_ecc.ini 2026-04-11 04:33:23,754 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9qbi3q63/solo_L1_stix-cal-energy_20250511_V03U_ecc_in.fits 2026-04-11 04:43:19,244 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250511_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250511_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250511_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250511_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 04:43:25,584 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 04:43:25,592 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9qbi3q63 2026-04-11 04:43:25,625 Soop found: SOOP 2026-04-11 04:43:25,625 Soop found: SOOP 2026-04-11 04:43:25,625 Soop found: SOOP 2026-04-11 04:43:25,726 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/11/CAL/solo_CAL_stix-cal-energy_20250511T044749-20250512T075120_V02.fits 2026-04-11 04:43:25,905 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_br4szm27 2026-04-11 04:43:25,906 Read config from in: /tmp/ecc_context_ecc_cfg_1_br4szm27/post_ecc.ini 2026-04-11 04:43:27,170 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_br4szm27/solo_L1_stix-cal-energy_20250526_V03U_ecc_in.fits 2026-04-11 04:53:21,249 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250526_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250526_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250526_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250526_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 04:53:27,517 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 04:53:27,528 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_br4szm27 2026-04-11 04:53:27,561 Soop found: SOOP 2026-04-11 04:53:27,561 Soop found: SOOP 2026-04-11 04:53:27,561 Soop found: SOOP 2026-04-11 04:53:27,657 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/26/CAL/solo_CAL_stix-cal-energy_20250526T042354-20250527T042354_V02.fits 2026-04-11 04:53:27,817 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vyglmaj1 2026-04-11 04:53:27,817 Read config from in: /tmp/ecc_context_ecc_cfg_1_vyglmaj1/post_ecc.ini 2026-04-11 04:53:29,065 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vyglmaj1/solo_L1_stix-cal-energy_20250519_V03U_ecc_in.fits 2026-04-11 05:03:06,401 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250519_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250519_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250519_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250519_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 05:03:14,132 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 05:03:14,140 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vyglmaj1 2026-04-11 05:03:14,164 Soop found: SOOP 2026-04-11 05:03:14,261 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/19/CAL/solo_CAL_stix-cal-energy_20250519T002201-20250520T002200_V02.fits 2026-04-11 05:03:14,420 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oeu6g86e 2026-04-11 05:03:14,421 Read config from in: /tmp/ecc_context_ecc_cfg_1_oeu6g86e/post_ecc.ini 2026-04-11 05:03:15,645 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oeu6g86e/solo_L1_stix-cal-energy_20250522_V03U_ecc_in.fits 2026-04-11 05:13:09,640 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250522_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250522_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250522_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250522_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 05:13:16,107 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 05:13:16,115 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oeu6g86e 2026-04-11 05:13:16,143 Soop found: SOOP 2026-04-11 05:13:16,242 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/22/CAL/solo_CAL_stix-cal-energy_20250522T014115-20250523T014116_V02.fits 2026-04-11 05:13:16,426 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ibu5ul0t 2026-04-11 05:13:16,426 Read config from in: /tmp/ecc_context_ecc_cfg_1_ibu5ul0t/post_ecc.ini 2026-04-11 05:13:17,652 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ibu5ul0t/solo_L1_stix-cal-energy_20250525_V03U_ecc_in.fits 2026-04-11 05:23:00,648 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250525_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250525_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250525_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250525_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 05:23:07,017 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 05:23:07,024 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ibu5ul0t 2026-04-11 05:23:07,051 Soop found: SOOP 2026-04-11 05:23:07,146 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/25/CAL/solo_CAL_stix-cal-energy_20250525T020805-20250526T023240_V02.fits 2026-04-11 05:23:07,313 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4h2o8mrf 2026-04-11 05:23:07,313 Read config from in: /tmp/ecc_context_ecc_cfg_1_4h2o8mrf/post_ecc.ini 2026-04-11 05:23:08,549 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4h2o8mrf/solo_L1_stix-cal-energy_20250528_V03U_ecc_in.fits 2026-04-11 05:32:49,517 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250528_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250528_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250528_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250528_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 05:32:55,862 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 05:32:55,869 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4h2o8mrf 2026-04-11 05:32:55,897 Soop found: SOOP 2026-04-11 05:32:55,997 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/28/CAL/solo_CAL_stix-cal-energy_20250528T042406-20250529T043530_V02.fits 2026-04-11 05:32:56,162 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9jcrho_1 2026-04-11 05:32:56,163 Read config from in: /tmp/ecc_context_ecc_cfg_1_9jcrho_1/post_ecc.ini 2026-04-11 05:32:57,408 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9jcrho_1/solo_L1_stix-cal-energy_20250509_V03U_ecc_in.fits 2026-04-11 05:43:17,243 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250509_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250509_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250509_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250509_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 05:43:23,778 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 05:43:23,785 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9jcrho_1 2026-04-11 05:43:23,814 Soop found: SOOP 2026-04-11 05:43:23,912 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/09/CAL/solo_CAL_stix-cal-energy_20250509T044736-20250510T044736_V02.fits 2026-04-11 05:43:24,088 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_msrft_wf 2026-04-11 05:43:24,088 Read config from in: /tmp/ecc_context_ecc_cfg_1_msrft_wf/post_ecc.ini 2026-04-11 05:43:25,327 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_msrft_wf/solo_L1_stix-cal-energy_20250529_V03U_ecc_in.fits 2026-04-11 05:53:29,399 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250529_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250529_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250529_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250529_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 05:53:35,878 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 05:53:35,889 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_msrft_wf 2026-04-11 05:53:35,936 Soop found: SOOP 2026-04-11 05:53:36,045 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/29/CAL/solo_CAL_stix-cal-energy_20250529T063435-20250530T063435_V02.fits 2026-04-11 05:53:36,227 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f4hjnffe 2026-04-11 05:53:36,227 Read config from in: /tmp/ecc_context_ecc_cfg_1_f4hjnffe/post_ecc.ini 2026-04-11 05:53:37,480 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f4hjnffe/solo_L1_stix-cal-energy_20250502_V03U_ecc_in.fits 2026-04-11 06:03:39,898 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250502_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250502_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250502_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250502_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 06:03:47,624 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 06:03:47,631 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f4hjnffe 2026-04-11 06:03:47,656 Soop found: SOOP 2026-04-11 06:03:47,751 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/02/CAL/solo_CAL_stix-cal-energy_20250502T000310-20250503T000506_V02.fits 2026-04-11 06:03:47,919 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zi__7hp0 2026-04-11 06:03:47,919 Read config from in: /tmp/ecc_context_ecc_cfg_1_zi__7hp0/post_ecc.ini 2026-04-11 06:03:49,151 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zi__7hp0/solo_L1_stix-cal-energy_20250513_V03U_ecc_in.fits 2026-04-11 06:13:46,549 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250513_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250513_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250513_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250513_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 06:13:52,988 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 06:13:52,995 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zi__7hp0 2026-04-11 06:13:53,022 Soop found: SOOP 2026-04-11 06:13:53,118 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/13/CAL/solo_CAL_stix-cal-energy_20250513T093514-20250514T093514_V02.fits 2026-04-11 06:13:53,287 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_89a1y_os 2026-04-11 06:13:53,287 Read config from in: /tmp/ecc_context_ecc_cfg_1_89a1y_os/post_ecc.ini 2026-04-11 06:13:54,526 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_89a1y_os/solo_L1_stix-cal-energy_20250515_V03U_ecc_in.fits 2026-04-11 06:23:39,227 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250515_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250515_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250515_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250515_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 06:23:45,511 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 06:23:45,518 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_89a1y_os 2026-04-11 06:23:45,545 Soop found: SOOP 2026-04-11 06:23:45,545 Soop found: SOOP 2026-04-11 06:23:45,646 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/15/CAL/solo_CAL_stix-cal-energy_20250515T112729-20250516T112728_V02.fits 2026-04-11 06:23:45,813 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uzlt6rn7 2026-04-11 06:23:45,814 Read config from in: /tmp/ecc_context_ecc_cfg_1_uzlt6rn7/post_ecc.ini 2026-04-11 06:23:47,068 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uzlt6rn7/solo_L1_stix-cal-energy_20250504_V03U_ecc_in.fits 2026-04-11 06:33:36,838 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250504_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250504_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250504_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250504_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 06:33:43,200 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 06:33:43,206 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uzlt6rn7 2026-04-11 06:33:43,240 Soop found: SOOP 2026-04-11 06:33:43,240 Soop found: SOOP 2026-04-11 06:33:43,340 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/05/04/CAL/solo_CAL_stix-cal-energy_20250504T000527-20250505T011951_V02.fits 2026-04-11 06:33:43,513 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__ubewm89 2026-04-11 06:33:43,514 Read config from in: /tmp/ecc_context_ecc_cfg_1__ubewm89/post_ecc.ini 2026-04-11 06:33:44,792 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__ubewm89/solo_L1_stix-cal-energy_20250730_V03U_ecc_in.fits 2026-04-11 06:43:03,981 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250730_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250730_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250730_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250730_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 06:43:10,315 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 06:43:10,322 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__ubewm89 2026-04-11 06:43:10,350 Soop found: SOOP 2026-04-11 06:43:10,448 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/30/CAL/solo_CAL_stix-cal-energy_20250730T024709-20250731T024709_V02.fits 2026-04-11 06:43:10,613 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nw0xgw5q 2026-04-11 06:43:10,614 Read config from in: /tmp/ecc_context_ecc_cfg_1_nw0xgw5q/post_ecc.ini 2026-04-11 06:43:11,862 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nw0xgw5q/solo_L1_stix-cal-energy_20250710_V03U_ecc_in.fits 2026-04-11 06:52:26,885 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250710_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250710_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250710_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250710_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 06:52:33,672 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 06:52:33,680 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nw0xgw5q 2026-04-11 06:52:33,710 Soop found: SOOP 2026-04-11 06:52:33,813 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/10/CAL/solo_CAL_stix-cal-energy_20250710T020641-20250711T020640_V02.fits 2026-04-11 06:52:33,979 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c5gc8zba 2026-04-11 06:52:33,979 Read config from in: /tmp/ecc_context_ecc_cfg_1_c5gc8zba/post_ecc.ini 2026-04-11 06:52:35,238 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c5gc8zba/solo_L1_stix-cal-energy_20250701_V03U_ecc_in.fits 2026-04-11 07:02:07,435 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250701_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250701_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250701_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250701_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 07:02:15,976 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 07:02:15,985 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c5gc8zba 2026-04-11 07:02:16,013 Soop found: SOOP 2026-04-11 07:02:16,114 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/01/CAL/solo_CAL_stix-cal-energy_20250701T013316-20250702T013315_V02.fits 2026-04-11 07:02:16,288 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r7li036t 2026-04-11 07:02:16,289 Read config from in: /tmp/ecc_context_ecc_cfg_1_r7li036t/post_ecc.ini 2026-04-11 07:02:17,524 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r7li036t/solo_L1_stix-cal-energy_20250724_V03U_ecc_in.fits 2026-04-11 07:12:09,746 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250724_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250724_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250724_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250724_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 07:12:16,076 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 07:12:16,083 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r7li036t 2026-04-11 07:12:16,110 Soop found: SOOP 2026-04-11 07:12:16,207 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/24/CAL/solo_CAL_stix-cal-energy_20250724T010135-20250725T010136_V02.fits 2026-04-11 07:12:16,369 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mdp9avgo 2026-04-11 07:12:16,369 Read config from in: /tmp/ecc_context_ecc_cfg_1_mdp9avgo/post_ecc.ini 2026-04-11 07:12:17,612 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mdp9avgo/solo_L1_stix-cal-energy_20250708_V03U_ecc_in.fits 2026-04-11 07:21:44,393 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250708_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250708_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250708_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250708_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 07:21:50,709 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 07:21:50,715 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mdp9avgo 2026-04-11 07:21:50,745 Soop found: SOOP 2026-04-11 07:21:50,841 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/08/CAL/solo_CAL_stix-cal-energy_20250708T020629-20250709T020628_V02.fits 2026-04-11 07:21:51,009 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kjsmlov1 2026-04-11 07:21:51,009 Read config from in: /tmp/ecc_context_ecc_cfg_1_kjsmlov1/post_ecc.ini 2026-04-11 07:21:52,259 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kjsmlov1/solo_L1_stix-cal-energy_20250705_V03U_ecc_in.fits 2026-04-11 07:31:16,129 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250705_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250705_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250705_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250705_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 07:31:22,597 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 07:31:22,605 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kjsmlov1 2026-04-11 07:31:22,638 Soop found: SOOP 2026-04-11 07:31:22,738 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/05/CAL/solo_CAL_stix-cal-energy_20250705T013338-20250706T013339_V02.fits 2026-04-11 07:31:22,902 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lgl5ioxz 2026-04-11 07:31:22,902 Read config from in: /tmp/ecc_context_ecc_cfg_1_lgl5ioxz/post_ecc.ini 2026-04-11 07:31:24,153 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lgl5ioxz/solo_L1_stix-cal-energy_20250714_V03U_ecc_in.fits 2026-04-11 07:41:04,633 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250714_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250714_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250714_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250714_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 07:41:10,979 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 07:41:10,987 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lgl5ioxz 2026-04-11 07:41:11,022 Soop found: SOOP 2026-04-11 07:41:11,125 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/14/CAL/solo_CAL_stix-cal-energy_20250714T025802-20250715T025803_V02.fits 2026-04-11 07:41:11,308 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6m_4i5i8 2026-04-11 07:41:11,309 Read config from in: /tmp/ecc_context_ecc_cfg_1_6m_4i5i8/post_ecc.ini 2026-04-11 07:41:12,569 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6m_4i5i8/solo_L1_stix-cal-energy_20250707_V03U_ecc_in.fits 2026-04-11 07:50:43,560 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250707_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250707_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250707_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250707_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 07:50:49,887 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 07:50:49,894 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6m_4i5i8 2026-04-11 07:50:49,923 Soop found: SOOP 2026-04-11 07:50:50,019 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/07/CAL/solo_CAL_stix-cal-energy_20250707T020623-20250708T020623_V02.fits 2026-04-11 07:50:51,798 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4r94aigv 2026-04-11 07:50:51,798 Read config from in: /tmp/ecc_context_ecc_cfg_1_4r94aigv/post_ecc.ini 2026-04-11 07:50:53,036 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4r94aigv/solo_L1_stix-cal-energy_20250720_V03U_ecc_in.fits 2026-04-11 08:00:42,854 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250720_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250720_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250720_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250720_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 08:00:49,141 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 08:00:49,149 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_4r94aigv 2026-04-11 08:00:49,176 Soop found: SOOP 2026-04-11 08:00:49,177 Soop found: SOOP 2026-04-11 08:00:49,177 Soop found: SOOP 2026-04-11 08:00:49,276 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/20/CAL/solo_CAL_stix-cal-energy_20250720T032337-20250721T000002_V02.fits 2026-04-11 08:00:49,442 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jooig4g8 2026-04-11 08:00:49,442 Read config from in: /tmp/ecc_context_ecc_cfg_1_jooig4g8/post_ecc.ini 2026-04-11 08:00:50,665 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jooig4g8/solo_L1_stix-cal-energy_20250706_V03U_ecc_in.fits 2026-04-11 08:10:12,297 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250706_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250706_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250706_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250706_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 08:10:18,616 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 08:10:18,623 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jooig4g8 2026-04-11 08:10:18,649 Soop found: SOOP 2026-04-11 08:10:18,650 Soop found: SOOP 2026-04-11 08:10:18,747 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/06/CAL/solo_CAL_stix-cal-energy_20250706T013345-20250707T013939_V02.fits 2026-04-11 08:10:18,910 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pq19k83s 2026-04-11 08:10:18,911 Read config from in: /tmp/ecc_context_ecc_cfg_1_pq19k83s/post_ecc.ini 2026-04-11 08:10:20,212 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pq19k83s/solo_L1_stix-cal-energy_20250703_V03U_ecc_in.fits 2026-04-11 08:19:27,346 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250703_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250703_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250703_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250703_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 08:19:33,653 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 08:19:33,661 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pq19k83s 2026-04-11 08:19:33,692 Soop found: SOOP 2026-04-11 08:19:33,793 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/03/CAL/solo_CAL_stix-cal-energy_20250703T013327-20250704T013326_V02.fits 2026-04-11 08:19:33,961 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xha6f2rp 2026-04-11 08:19:33,961 Read config from in: /tmp/ecc_context_ecc_cfg_1_xha6f2rp/post_ecc.ini 2026-04-11 08:19:35,184 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xha6f2rp/solo_L1_stix-cal-energy_20250717_V03U_ecc_in.fits 2026-04-11 08:29:23,018 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250717_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250717_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250717_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250717_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 08:29:29,322 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 08:29:29,329 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xha6f2rp 2026-04-11 08:29:29,362 Soop found: SOOP 2026-04-11 08:29:29,461 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/17/CAL/solo_CAL_stix-cal-energy_20250717T032319-20250718T032318_V02.fits 2026-04-11 08:29:29,624 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zdmf93x0 2026-04-11 08:29:29,625 Read config from in: /tmp/ecc_context_ecc_cfg_1_zdmf93x0/post_ecc.ini 2026-04-11 08:29:30,857 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zdmf93x0/solo_L1_stix-cal-energy_20250731_V03U_ecc_in.fits 2026-04-11 08:39:02,553 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250731_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250731_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250731_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250731_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 08:39:08,858 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 08:39:08,865 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zdmf93x0 2026-04-11 08:39:08,891 Soop found: SOOP 2026-04-11 08:39:08,986 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/31/CAL/solo_CAL_stix-cal-energy_20250731T024716-20250801T024715_V02.fits 2026-04-11 08:39:09,154 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f4rxm81x 2026-04-11 08:39:09,155 Read config from in: /tmp/ecc_context_ecc_cfg_1_f4rxm81x/post_ecc.ini 2026-04-11 08:39:10,397 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f4rxm81x/solo_L1_stix-cal-energy_20250718_V03U_ecc_in.fits 2026-04-11 08:48:53,086 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250718_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250718_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250718_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250718_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 08:49:01,038 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 08:49:01,045 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_f4rxm81x 2026-04-11 08:49:01,071 Soop found: SOOP 2026-04-11 08:49:01,169 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/18/CAL/solo_CAL_stix-cal-energy_20250718T032324-20250719T032325_V02.fits 2026-04-11 08:49:01,331 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vhvvkgmk 2026-04-11 08:49:01,332 Read config from in: /tmp/ecc_context_ecc_cfg_1_vhvvkgmk/post_ecc.ini 2026-04-11 08:49:02,567 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vhvvkgmk/solo_L1_stix-cal-energy_20250723_V03U_ecc_in.fits 2026-04-11 08:58:30,780 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250723_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250723_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250723_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250723_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 08:58:37,055 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 08:58:37,063 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vhvvkgmk 2026-04-11 08:58:37,100 Soop found: SOOP 2026-04-11 08:58:37,199 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/23/CAL/solo_CAL_stix-cal-energy_20250723T002546-20250724T005811_V02.fits 2026-04-11 08:58:37,385 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0kvz1qd9 2026-04-11 08:58:37,386 Read config from in: /tmp/ecc_context_ecc_cfg_1_0kvz1qd9/post_ecc.ini 2026-04-11 08:58:38,616 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0kvz1qd9/solo_L1_stix-cal-energy_20250716_V03U_ecc_in.fits 2026-04-11 09:08:13,873 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250716_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250716_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250716_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250716_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 09:08:20,228 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 09:08:20,236 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0kvz1qd9 2026-04-11 09:08:20,264 Soop found: SOOP 2026-04-11 09:08:20,360 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/16/CAL/solo_CAL_stix-cal-energy_20250716T025818-20250717T025957_V02.fits 2026-04-11 09:08:20,530 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q3u25ik0 2026-04-11 09:08:20,530 Read config from in: /tmp/ecc_context_ecc_cfg_1_q3u25ik0/post_ecc.ini 2026-04-11 09:08:21,769 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q3u25ik0/solo_L1_stix-cal-energy_20250721_V03U_ecc_in.fits 2026-04-11 09:18:00,315 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250721_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250721_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250721_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250721_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 09:18:06,793 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 09:18:06,801 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q3u25ik0 2026-04-11 09:18:06,837 Soop found: SOOP 2026-04-11 09:18:06,940 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/21/CAL/solo_CAL_stix-cal-energy_20250721T002312-20250722T002311_V02.fits 2026-04-11 09:18:07,112 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9j4o6_sp 2026-04-11 09:18:07,112 Read config from in: /tmp/ecc_context_ecc_cfg_1_9j4o6_sp/post_ecc.ini 2026-04-11 09:18:08,409 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9j4o6_sp/solo_L1_stix-cal-energy_20250712_V03U_ecc_in.fits 2026-04-11 09:27:36,177 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250712_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250712_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250712_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250712_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 09:27:42,860 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 09:27:42,877 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9j4o6_sp 2026-04-11 09:27:42,973 Soop found: SOOP 2026-04-11 09:27:43,090 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/12/CAL/solo_CAL_stix-cal-energy_20250712T020654-20250713T020654_V02.fits 2026-04-11 09:27:43,289 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7qk0qjbw 2026-04-11 09:27:43,290 Read config from in: /tmp/ecc_context_ecc_cfg_1_7qk0qjbw/post_ecc.ini 2026-04-11 09:27:44,527 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7qk0qjbw/solo_L1_stix-cal-energy_20250727_V03U_ecc_in.fits 2026-04-11 09:37:12,026 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250727_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250727_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250727_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250727_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 09:37:18,247 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 09:37:18,254 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7qk0qjbw 2026-04-11 09:37:18,280 Soop found: SOOP 2026-04-11 09:37:18,280 Soop found: SOOP 2026-04-11 09:37:18,379 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/27/CAL/solo_CAL_stix-cal-energy_20250727T010531-20250728T011217_V02.fits 2026-04-11 09:37:18,548 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b0sr3kmx 2026-04-11 09:37:18,548 Read config from in: /tmp/ecc_context_ecc_cfg_1_b0sr3kmx/post_ecc.ini 2026-04-11 09:37:19,785 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b0sr3kmx/solo_L1_stix-cal-energy_20250711_V03U_ecc_in.fits 2026-04-11 09:46:49,865 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250711_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250711_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250711_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250711_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 09:46:57,656 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 09:46:57,664 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b0sr3kmx 2026-04-11 09:46:57,696 Soop found: SOOP 2026-04-11 09:46:57,793 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/11/CAL/solo_CAL_stix-cal-energy_20250711T020646-20250712T020646_V02.fits 2026-04-11 09:46:57,961 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i9119mml 2026-04-11 09:46:57,961 Read config from in: /tmp/ecc_context_ecc_cfg_1_i9119mml/post_ecc.ini 2026-04-11 09:46:59,199 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i9119mml/solo_L1_stix-cal-energy_20250726_V03U_ecc_in.fits 2026-04-11 09:56:22,373 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250726_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250726_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250726_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250726_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 09:56:29,384 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 09:56:29,393 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i9119mml 2026-04-11 09:56:29,423 Soop found: SOOP 2026-04-11 09:56:29,526 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/26/CAL/solo_CAL_stix-cal-energy_20250726T010525-20250727T010524_V02.fits 2026-04-11 09:56:29,699 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_77u3pjh2 2026-04-11 09:56:29,699 Read config from in: /tmp/ecc_context_ecc_cfg_1_77u3pjh2/post_ecc.ini 2026-04-11 09:56:30,968 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_77u3pjh2/solo_L1_stix-cal-energy_20250719_V03U_ecc_in.fits 2026-04-11 10:06:17,499 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250719_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250719_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250719_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250719_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 10:06:23,913 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 10:06:23,920 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_77u3pjh2 2026-04-11 10:06:23,949 Soop found: SOOP 2026-04-11 10:06:24,045 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/19/CAL/solo_CAL_stix-cal-energy_20250719T032331-20250720T032331_V02.fits 2026-04-11 10:06:24,187 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p3ns1mk7 2026-04-11 10:06:24,187 Read config from in: /tmp/ecc_context_ecc_cfg_1_p3ns1mk7/post_ecc.ini 2026-04-11 10:06:25,438 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p3ns1mk7/solo_L1_stix-cal-energy_20250722_V03U_ecc_in.fits 2026-04-11 10:16:00,838 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250722_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250722_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250722_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250722_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 10:16:07,271 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 10:16:07,278 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p3ns1mk7 2026-04-11 10:16:07,305 Soop found: SOOP 2026-04-11 10:16:07,402 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/22/CAL/solo_CAL_stix-cal-energy_20250722T002317-20250723T002540_V02.fits 2026-04-11 10:16:07,573 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5b1c4qtd 2026-04-11 10:16:07,573 Read config from in: /tmp/ecc_context_ecc_cfg_1_5b1c4qtd/post_ecc.ini 2026-04-11 10:16:08,836 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5b1c4qtd/solo_L1_stix-cal-energy_20250725_V03U_ecc_in.fits 2026-04-11 10:25:42,909 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250725_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250725_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250725_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250725_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 10:25:49,148 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 10:25:49,159 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5b1c4qtd 2026-04-11 10:25:49,188 Soop found: SOOP 2026-04-11 10:25:49,283 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/25/CAL/solo_CAL_stix-cal-energy_20250725T010142-20250726T010153_V02.fits 2026-04-11 10:25:49,454 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_73kjofte 2026-04-11 10:25:49,455 Read config from in: /tmp/ecc_context_ecc_cfg_1_73kjofte/post_ecc.ini 2026-04-11 10:25:50,695 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_73kjofte/solo_L1_stix-cal-energy_20250728_V03U_ecc_in.fits 2026-04-11 10:35:21,760 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250728_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250728_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250728_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250728_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 10:35:28,469 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 10:35:28,477 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_73kjofte 2026-04-11 10:35:28,505 Soop found: SOOP 2026-04-11 10:35:28,602 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/28/CAL/solo_CAL_stix-cal-energy_20250728T022424-20250729T022423_V02.fits 2026-04-11 10:35:28,770 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gx248iue 2026-04-11 10:35:28,770 Read config from in: /tmp/ecc_context_ecc_cfg_1_gx248iue/post_ecc.ini 2026-04-11 10:35:31,673 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gx248iue/solo_L1_stix-cal-energy_20250709_V03U_ecc_in.fits 2026-04-11 10:45:07,212 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250709_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250709_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250709_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250709_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 10:45:13,456 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 10:45:13,464 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gx248iue 2026-04-11 10:45:13,495 Soop found: SOOP 2026-04-11 10:45:13,601 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/09/CAL/solo_CAL_stix-cal-energy_20250709T020635-20250710T020635_V02.fits 2026-04-11 10:45:13,749 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z0tm8918 2026-04-11 10:45:13,750 Read config from in: /tmp/ecc_context_ecc_cfg_1_z0tm8918/post_ecc.ini 2026-04-11 10:45:15,021 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z0tm8918/solo_L1_stix-cal-energy_20250729_V03U_ecc_in.fits 2026-04-11 10:54:53,632 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250729_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250729_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250729_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250729_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 10:54:59,985 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 10:54:59,995 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z0tm8918 2026-04-11 10:55:00,022 Soop found: SOOP 2026-04-11 10:55:00,117 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/29/CAL/solo_CAL_stix-cal-energy_20250729T022430-20250730T023010_V02.fits 2026-04-11 10:55:00,288 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b1f1_x48 2026-04-11 10:55:00,288 Read config from in: /tmp/ecc_context_ecc_cfg_1_b1f1_x48/post_ecc.ini 2026-04-11 10:55:01,532 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b1f1_x48/solo_L1_stix-cal-energy_20250702_V03U_ecc_in.fits 2026-04-11 11:04:31,721 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250702_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250702_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250702_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250702_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 11:04:37,999 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 11:04:38,006 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b1f1_x48 2026-04-11 11:04:38,037 Soop found: SOOP 2026-04-11 11:04:38,139 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/02/CAL/solo_CAL_stix-cal-energy_20250702T013321-20250703T013321_V02.fits 2026-04-11 11:04:38,311 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a63e5ycm 2026-04-11 11:04:38,312 Read config from in: /tmp/ecc_context_ecc_cfg_1_a63e5ycm/post_ecc.ini 2026-04-11 11:04:39,554 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a63e5ycm/solo_L1_stix-cal-energy_20250713_V03U_ecc_in.fits 2026-04-11 11:14:20,749 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250713_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250713_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250713_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250713_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 11:14:27,525 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 11:14:27,533 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_a63e5ycm 2026-04-11 11:14:27,564 Soop found: SOOP 2026-04-11 11:14:27,564 Soop found: SOOP 2026-04-11 11:14:27,669 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/13/CAL/solo_CAL_stix-cal-energy_20250713T020700-20250714T023642_V02.fits 2026-04-11 11:14:27,835 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v9nxus8_ 2026-04-11 11:14:27,836 Read config from in: /tmp/ecc_context_ecc_cfg_1_v9nxus8_/post_ecc.ini 2026-04-11 11:14:29,123 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v9nxus8_/solo_L1_stix-cal-energy_20250715_V03U_ecc_in.fits 2026-04-11 11:23:53,274 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250715_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250715_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250715_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250715_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 11:23:59,646 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 11:23:59,653 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_v9nxus8_ 2026-04-11 11:23:59,681 Soop found: SOOP 2026-04-11 11:23:59,776 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/15/CAL/solo_CAL_stix-cal-energy_20250715T025809-20250716T025809_V02.fits 2026-04-11 11:23:59,938 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lhnv6q44 2026-04-11 11:23:59,938 Read config from in: /tmp/ecc_context_ecc_cfg_1_lhnv6q44/post_ecc.ini 2026-04-11 11:24:01,181 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lhnv6q44/solo_L1_stix-cal-energy_20250704_V03U_ecc_in.fits 2026-04-11 11:33:19,272 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250704_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250704_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250704_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250704_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 11:33:27,136 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 11:33:27,143 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lhnv6q44 2026-04-11 11:33:27,169 Soop found: SOOP 2026-04-11 11:33:27,267 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/07/04/CAL/solo_CAL_stix-cal-energy_20250704T013333-20250705T013332_V02.fits 2026-04-11 11:33:27,430 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uklotbwc 2026-04-11 11:33:27,431 Read config from in: /tmp/ecc_context_ecc_cfg_1_uklotbwc/post_ecc.ini 2026-04-11 11:33:28,659 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uklotbwc/solo_L1_stix-cal-energy_20250630_V03U_ecc_in.fits 2026-04-11 11:42:48,594 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250630_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250630_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250630_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250630_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 11:42:54,824 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 11:42:54,830 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uklotbwc 2026-04-11 11:42:54,867 Soop found: SOOP 2026-04-11 11:42:54,963 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/30/CAL/solo_CAL_stix-cal-energy_20250630T013307-20250701T013309_V02.fits 2026-04-11 11:42:55,134 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qyofnkae 2026-04-11 11:42:55,134 Read config from in: /tmp/ecc_context_ecc_cfg_1_qyofnkae/post_ecc.ini 2026-04-11 11:42:56,365 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qyofnkae/solo_L1_stix-cal-energy_20250610_V03U_ecc_in.fits 2026-04-11 11:52:38,492 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250610_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250610_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250610_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250610_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 11:52:44,790 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 11:52:44,797 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qyofnkae 2026-04-11 11:52:44,823 Soop found: SOOP 2026-04-11 11:52:44,920 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/10/CAL/solo_CAL_stix-cal-energy_20250610T000624-20250611T000924_V02.fits 2026-04-11 11:52:45,089 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9j6j4ya2 2026-04-11 11:52:45,090 Read config from in: /tmp/ecc_context_ecc_cfg_1_9j6j4ya2/post_ecc.ini 2026-04-11 11:52:46,413 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9j6j4ya2/solo_L1_stix-cal-energy_20250601_V03U_ecc_in.fits 2026-04-11 12:02:27,929 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250601_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250601_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250601_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250601_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 12:02:34,249 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 12:02:34,256 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9j6j4ya2 2026-04-11 12:02:34,282 Soop found: SOOP 2026-04-11 12:02:34,283 Soop found: SOOP 2026-04-11 12:02:34,379 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/01/CAL/solo_CAL_stix-cal-energy_20250601T073732-20250602T073744_V02.fits 2026-04-11 12:02:34,547 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7gg6o4m6 2026-04-11 12:02:34,548 Read config from in: /tmp/ecc_context_ecc_cfg_1_7gg6o4m6/post_ecc.ini 2026-04-11 12:02:35,883 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7gg6o4m6/solo_L1_stix-cal-energy_20250624_V03U_ecc_in.fits 2026-04-11 12:16:43,607 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250624_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250624_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250624_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250624_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 12:16:49,938 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 12:16:49,945 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7gg6o4m6 2026-04-11 12:16:49,975 Soop found: SOOP 2026-04-11 12:16:50,076 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/24/CAL/solo_CAL_stix-cal-energy_20250624T010128-20250625T010337_V02.fits 2026-04-11 12:16:50,250 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_09eo_xmf 2026-04-11 12:16:50,251 Read config from in: /tmp/ecc_context_ecc_cfg_1_09eo_xmf/post_ecc.ini 2026-04-11 12:16:51,489 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_09eo_xmf/solo_L1_stix-cal-energy_20250608_V03U_ecc_in.fits 2026-04-11 12:26:31,985 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250608_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250608_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250608_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250608_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 12:26:38,408 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 12:26:38,415 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_09eo_xmf 2026-04-11 12:26:38,446 Soop found: SOOP 2026-04-11 12:26:38,447 Soop found: SOOP 2026-04-11 12:26:38,549 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/08/CAL/solo_CAL_stix-cal-energy_20250608T080435-20250609T000003_V02.fits 2026-04-11 12:26:38,717 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6bs6rvh2 2026-04-11 12:26:38,718 Read config from in: /tmp/ecc_context_ecc_cfg_1_6bs6rvh2/post_ecc.ini 2026-04-11 12:26:40,017 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6bs6rvh2/solo_L1_stix-cal-energy_20250605_V03U_ecc_in.fits 2026-04-11 12:36:07,937 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250605_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250605_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250605_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250605_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 12:36:15,881 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 12:36:15,888 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6bs6rvh2 2026-04-11 12:36:15,915 Soop found: SOOP 2026-04-11 12:36:16,012 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/05/CAL/solo_CAL_stix-cal-energy_20250605T080417-20250606T080417_V02.fits 2026-04-11 12:36:16,190 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6k1i0urh 2026-04-11 12:36:16,191 Read config from in: /tmp/ecc_context_ecc_cfg_1_6k1i0urh/post_ecc.ini 2026-04-11 12:36:17,438 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6k1i0urh/solo_L1_stix-cal-energy_20250614_V03U_ecc_in.fits 2026-04-11 12:45:51,366 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250614_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250614_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250614_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250614_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 12:45:58,105 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 12:45:58,123 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6k1i0urh 2026-04-11 12:45:58,217 Soop found: SOOP 2026-04-11 12:45:58,347 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/14/CAL/solo_CAL_stix-cal-energy_20250614T001159-20250615T001158_V02.fits 2026-04-11 12:45:58,548 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dmlf84yj 2026-04-11 12:45:58,549 Read config from in: /tmp/ecc_context_ecc_cfg_1_dmlf84yj/post_ecc.ini 2026-04-11 12:45:59,805 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dmlf84yj/solo_L1_stix-cal-energy_20250607_V03U_ecc_in.fits 2026-04-11 12:55:29,918 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250607_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250607_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250607_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250607_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 12:55:36,267 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 12:55:36,274 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dmlf84yj 2026-04-11 12:55:36,305 Soop found: SOOP 2026-04-11 12:55:36,414 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/07/CAL/solo_CAL_stix-cal-energy_20250607T080429-20250608T080428_V02.fits 2026-04-11 12:55:36,584 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o7gg58u3 2026-04-11 12:55:36,584 Read config from in: /tmp/ecc_context_ecc_cfg_1_o7gg58u3/post_ecc.ini 2026-04-11 12:55:37,816 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o7gg58u3/solo_L1_stix-cal-energy_20250620_V03U_ecc_in.fits 2026-04-11 13:04:57,420 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250620_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250620_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250620_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250620_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 13:05:03,781 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 13:05:03,787 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o7gg58u3 2026-04-11 13:05:03,815 Soop found: SOOP 2026-04-11 13:05:03,913 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/20/CAL/solo_CAL_stix-cal-energy_20250620T002306-20250621T002334_V02.fits 2026-04-11 13:05:04,079 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5p9twski 2026-04-11 13:05:04,080 Read config from in: /tmp/ecc_context_ecc_cfg_1_5p9twski/post_ecc.ini 2026-04-11 13:05:05,319 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5p9twski/solo_L1_stix-cal-energy_20250606_V03U_ecc_in.fits 2026-04-11 13:14:37,484 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250606_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250606_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250606_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250606_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 13:14:43,842 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 13:14:43,850 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5p9twski 2026-04-11 13:14:43,885 Soop found: SOOP 2026-04-11 13:14:43,988 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/06/CAL/solo_CAL_stix-cal-energy_20250606T080423-20250607T080422_V02.fits 2026-04-11 13:14:44,155 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ud0xrq80 2026-04-11 13:14:44,156 Read config from in: /tmp/ecc_context_ecc_cfg_1_ud0xrq80/post_ecc.ini 2026-04-11 13:14:45,410 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ud0xrq80/solo_L1_stix-cal-energy_20250603_V03U_ecc_in.fits 2026-04-11 13:24:24,058 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250603_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250603_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250603_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250603_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 13:24:30,430 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 13:24:30,436 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ud0xrq80 2026-04-11 13:24:30,465 Soop found: SOOP 2026-04-11 13:24:30,561 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/03/CAL/solo_CAL_stix-cal-energy_20250603T080405-20250604T080405_V02.fits 2026-04-11 13:24:32,193 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bdseoc6y 2026-04-11 13:24:32,193 Read config from in: /tmp/ecc_context_ecc_cfg_1_bdseoc6y/post_ecc.ini 2026-04-11 13:24:33,426 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bdseoc6y/solo_L1_stix-cal-energy_20250617_V03U_ecc_in.fits 2026-04-11 13:33:55,060 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250617_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250617_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250617_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250617_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 13:34:01,395 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 13:34:01,402 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bdseoc6y 2026-04-11 13:34:01,428 Soop found: SOOP 2026-04-11 13:34:01,522 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/17/CAL/solo_CAL_stix-cal-energy_20250617T002206-20250618T002206_V02.fits 2026-04-11 13:34:01,665 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z6idaqk8 2026-04-11 13:34:01,666 Read config from in: /tmp/ecc_context_ecc_cfg_1_z6idaqk8/post_ecc.ini 2026-04-11 13:34:02,894 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z6idaqk8/solo_L1_stix-cal-energy_20250618_V03U_ecc_in.fits 2026-04-11 13:43:34,539 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250618_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250618_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250618_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250618_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 13:43:40,792 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 13:43:40,799 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z6idaqk8 2026-04-11 13:43:40,824 Soop found: SOOP 2026-04-11 13:43:40,918 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/18/CAL/solo_CAL_stix-cal-energy_20250618T002213-20250619T002227_V02.fits 2026-04-11 13:43:41,060 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_viovishb 2026-04-11 13:43:41,060 Read config from in: /tmp/ecc_context_ecc_cfg_1_viovishb/post_ecc.ini 2026-04-11 13:43:42,294 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_viovishb/solo_L1_stix-cal-energy_20250623_V03U_ecc_in.fits 2026-04-11 13:53:01,513 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250623_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250623_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250623_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250623_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 13:53:08,137 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 13:53:08,147 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_viovishb 2026-04-11 13:53:08,229 Soop found: SOOP 2026-04-11 13:53:08,343 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/23/CAL/solo_CAL_stix-cal-energy_20250623T010121-20250624T010121_V02.fits 2026-04-11 13:53:08,531 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h3dom_rk 2026-04-11 13:53:08,532 Read config from in: /tmp/ecc_context_ecc_cfg_1_h3dom_rk/post_ecc.ini 2026-04-11 13:53:09,763 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h3dom_rk/solo_L1_stix-cal-energy_20250616_V03U_ecc_in.fits 2026-04-11 14:02:39,210 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250616_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250616_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250616_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250616_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 14:02:45,530 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 14:02:45,537 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h3dom_rk 2026-04-11 14:02:45,564 Soop found: SOOP 2026-04-11 14:02:45,658 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/16/CAL/solo_CAL_stix-cal-energy_20250616T002200-20250617T002200_V02.fits 2026-04-11 14:02:45,799 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mtvvwgcd 2026-04-11 14:02:45,799 Read config from in: /tmp/ecc_context_ecc_cfg_1_mtvvwgcd/post_ecc.ini 2026-04-11 14:02:47,044 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mtvvwgcd/solo_L1_stix-cal-energy_20250621_V03U_ecc_in.fits 2026-04-11 14:12:09,772 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250621_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250621_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250621_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250621_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 14:12:16,122 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 14:12:16,129 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mtvvwgcd 2026-04-11 14:12:16,167 Soop found: SOOP 2026-04-11 14:12:16,267 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/21/CAL/solo_CAL_stix-cal-energy_20250621T002650-20250622T002650_V02.fits 2026-04-11 14:12:16,441 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kd0qgmtv 2026-04-11 14:12:16,442 Read config from in: /tmp/ecc_context_ecc_cfg_1_kd0qgmtv/post_ecc.ini 2026-04-11 14:12:17,689 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kd0qgmtv/solo_L1_stix-cal-energy_20250612_V03U_ecc_in.fits 2026-04-11 14:21:45,262 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250612_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250612_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250612_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250612_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 14:21:53,193 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 14:21:53,200 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kd0qgmtv 2026-04-11 14:21:53,226 Soop found: SOOP 2026-04-11 14:21:53,324 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/12/CAL/solo_CAL_stix-cal-energy_20250612T001109-20250613T001108_V02.fits 2026-04-11 14:21:53,471 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oj8wbkdu 2026-04-11 14:21:53,471 Read config from in: /tmp/ecc_context_ecc_cfg_1_oj8wbkdu/post_ecc.ini 2026-04-11 14:21:54,710 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oj8wbkdu/solo_L1_stix-cal-energy_20250627_V03U_ecc_in.fits 2026-04-11 14:31:13,995 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250627_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250627_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250627_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250627_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 14:31:20,620 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 14:31:20,629 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oj8wbkdu 2026-04-11 14:31:20,664 Soop found: SOOP 2026-04-11 14:31:20,778 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/27/CAL/solo_CAL_stix-cal-energy_20250627T010406-20250628T010405_V02.fits 2026-04-11 14:31:20,936 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7vblep1f 2026-04-11 14:31:20,937 Read config from in: /tmp/ecc_context_ecc_cfg_1_7vblep1f/post_ecc.ini 2026-04-11 14:31:22,203 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7vblep1f/solo_L1_stix-cal-energy_20250611_V03U_ecc_in.fits 2026-04-11 14:40:43,962 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250611_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250611_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250611_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250611_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 14:40:50,427 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 14:40:50,435 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7vblep1f 2026-04-11 14:40:50,467 Soop found: SOOP 2026-04-11 14:40:50,571 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/11/CAL/solo_CAL_stix-cal-energy_20250611T001103-20250612T001103_V02.fits 2026-04-11 14:40:50,726 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hhbiemfi 2026-04-11 14:40:50,727 Read config from in: /tmp/ecc_context_ecc_cfg_1_hhbiemfi/post_ecc.ini 2026-04-11 14:40:51,988 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hhbiemfi/solo_L1_stix-cal-energy_20250626_V03U_ecc_in.fits 2026-04-11 14:50:14,368 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250626_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250626_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250626_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250626_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 14:50:20,734 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 14:50:20,743 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hhbiemfi 2026-04-11 14:50:20,800 Soop found: SOOP 2026-04-11 14:50:20,912 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/26/CAL/solo_CAL_stix-cal-energy_20250626T010400-20250627T010400_V02.fits 2026-04-11 14:50:21,088 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ehkqudm0 2026-04-11 14:50:21,089 Read config from in: /tmp/ecc_context_ecc_cfg_1_ehkqudm0/post_ecc.ini 2026-04-11 14:50:22,333 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ehkqudm0/solo_L1_stix-cal-energy_20250619_V03U_ecc_in.fits 2026-04-11 14:59:54,926 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250619_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250619_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250619_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250619_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 15:00:01,226 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 15:00:01,233 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ehkqudm0 2026-04-11 15:00:01,265 Soop found: SOOP 2026-04-11 15:00:01,366 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/19/CAL/solo_CAL_stix-cal-energy_20250619T002257-20250620T002257_V02.fits 2026-04-11 15:00:01,516 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ere4t3lo 2026-04-11 15:00:01,517 Read config from in: /tmp/ecc_context_ecc_cfg_1_ere4t3lo/post_ecc.ini 2026-04-11 15:00:02,777 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ere4t3lo/solo_L1_stix-cal-energy_20250622_V03U_ecc_in.fits 2026-04-11 15:09:48,344 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250622_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250622_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250622_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250622_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 15:09:54,745 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 15:09:54,752 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ere4t3lo 2026-04-11 15:09:54,783 Soop found: SOOP 2026-04-11 15:09:54,783 Soop found: SOOP 2026-04-11 15:09:54,879 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/22/CAL/solo_CAL_stix-cal-energy_20250622T002656-20250623T003546_V02.fits 2026-04-11 15:09:55,027 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yo5bc8ri 2026-04-11 15:09:55,027 Read config from in: /tmp/ecc_context_ecc_cfg_1_yo5bc8ri/post_ecc.ini 2026-04-11 15:09:57,799 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yo5bc8ri/solo_L1_stix-cal-energy_20250625_V03U_ecc_in.fits 2026-04-11 15:19:34,788 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250625_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250625_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250625_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250625_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 15:19:41,115 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 15:19:41,122 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yo5bc8ri 2026-04-11 15:19:41,154 Soop found: SOOP 2026-04-11 15:19:41,249 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/25/CAL/solo_CAL_stix-cal-energy_20250625T010354-20250626T010354_V02.fits 2026-04-11 15:19:41,417 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7o59s9_f 2026-04-11 15:19:41,417 Read config from in: /tmp/ecc_context_ecc_cfg_1_7o59s9_f/post_ecc.ini 2026-04-11 15:19:42,645 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7o59s9_f/solo_L1_stix-cal-energy_20250628_V03U_ecc_in.fits 2026-04-11 15:28:59,668 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250628_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250628_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250628_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250628_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 15:29:06,042 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 15:29:06,050 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7o59s9_f 2026-04-11 15:29:06,080 Soop found: SOOP 2026-04-11 15:29:06,181 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/28/CAL/solo_CAL_stix-cal-energy_20250628T010411-20250629T010411_V02.fits 2026-04-11 15:29:06,358 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i4lqcofa 2026-04-11 15:29:06,359 Read config from in: /tmp/ecc_context_ecc_cfg_1_i4lqcofa/post_ecc.ini 2026-04-11 15:29:07,612 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i4lqcofa/solo_L1_stix-cal-energy_20250609_V03U_ecc_in.fits 2026-04-11 15:38:44,750 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250609_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250609_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250609_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250609_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 15:38:51,033 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 15:38:51,040 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i4lqcofa 2026-04-11 15:38:51,067 Soop found: SOOP 2026-04-11 15:38:51,160 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/09/CAL/solo_CAL_stix-cal-energy_20250609T000618-20250610T000618_V02.fits 2026-04-11 15:38:51,323 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7a5i606e 2026-04-11 15:38:51,324 Read config from in: /tmp/ecc_context_ecc_cfg_1_7a5i606e/post_ecc.ini 2026-04-11 15:38:52,576 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7a5i606e/solo_L1_stix-cal-energy_20250629_V03U_ecc_in.fits 2026-04-11 15:48:16,030 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250629_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250629_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250629_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250629_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 15:48:22,273 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 15:48:22,281 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7a5i606e 2026-04-11 15:48:22,308 Soop found: SOOP 2026-04-11 15:48:22,308 Soop found: SOOP 2026-04-11 15:48:22,402 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/29/CAL/solo_CAL_stix-cal-energy_20250629T010418-20250630T010610_V02.fits 2026-04-11 15:48:22,575 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_epgs1e8h 2026-04-11 15:48:22,576 Read config from in: /tmp/ecc_context_ecc_cfg_1_epgs1e8h/post_ecc.ini 2026-04-11 15:48:23,808 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_epgs1e8h/solo_L1_stix-cal-energy_20250602_V03U_ecc_in.fits 2026-04-11 15:57:52,947 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250602_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250602_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250602_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250602_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 15:57:59,237 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 15:57:59,244 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_epgs1e8h 2026-04-11 15:57:59,277 Soop found: SOOP 2026-04-11 15:57:59,374 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/02/CAL/solo_CAL_stix-cal-energy_20250602T080357-20250603T080357_V02.fits 2026-04-11 15:57:59,542 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j59lb134 2026-04-11 15:57:59,542 Read config from in: /tmp/ecc_context_ecc_cfg_1_j59lb134/post_ecc.ini 2026-04-11 15:58:00,780 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j59lb134/solo_L1_stix-cal-energy_20250613_V03U_ecc_in.fits 2026-04-11 16:07:34,775 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250613_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250613_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250613_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250613_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 16:07:42,646 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 16:07:42,653 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j59lb134 2026-04-11 16:07:42,678 Soop found: SOOP 2026-04-11 16:07:42,773 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/13/CAL/solo_CAL_stix-cal-energy_20250613T001115-20250614T001136_V02.fits 2026-04-11 16:07:42,939 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jbtvwfyr 2026-04-11 16:07:42,940 Read config from in: /tmp/ecc_context_ecc_cfg_1_jbtvwfyr/post_ecc.ini 2026-04-11 16:07:44,182 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jbtvwfyr/solo_L1_stix-cal-energy_20250615_V03U_ecc_in.fits 2026-04-11 16:17:19,773 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250615_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250615_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250615_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250615_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 16:17:25,968 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 16:17:25,975 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jbtvwfyr 2026-04-11 16:17:26,002 Soop found: SOOP 2026-04-11 16:17:26,002 Soop found: SOOP 2026-04-11 16:17:26,098 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/15/CAL/solo_CAL_stix-cal-energy_20250615T001204-20250616T000002_V02.fits 2026-04-11 16:17:26,248 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jio1xg8j 2026-04-11 16:17:26,248 Read config from in: /tmp/ecc_context_ecc_cfg_1_jio1xg8j/post_ecc.ini 2026-04-11 16:17:27,488 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jio1xg8j/solo_L1_stix-cal-energy_20250604_V03U_ecc_in.fits 2026-04-11 16:26:56,518 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250604_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250604_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250604_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250604_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 16:27:02,768 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 16:27:02,777 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jio1xg8j 2026-04-11 16:27:02,804 Soop found: SOOP 2026-04-11 16:27:02,899 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/06/04/CAL/solo_CAL_stix-cal-energy_20250604T080410-20250605T080411_V02.fits 2026-04-11 16:27:03,063 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fafu_pu_ 2026-04-11 16:27:03,064 Read config from in: /tmp/ecc_context_ecc_cfg_1_fafu_pu_/post_ecc.ini 2026-04-11 16:27:04,294 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fafu_pu_/solo_L1_stix-cal-energy_20250330_V03U_ecc_in.fits 2026-04-11 16:37:31,386 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250330_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250330_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250330_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250330_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 16:37:37,716 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-11 16:37:37,723 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_fafu_pu_ 2026-04-11 16:37:37,750 Soop found: SOOP 2026-04-11 16:37:37,750 Soop found: SOOP 2026-04-11 16:37:37,750 Soop found: SOOP 2026-04-11 16:37:37,859 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/30/CAL/solo_CAL_stix-cal-energy_20250330T000417-20250331T002214_V02.fits 2026-04-11 16:37:38,028 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0wmk0rwj 2026-04-11 16:37:38,029 Read config from in: /tmp/ecc_context_ecc_cfg_1_0wmk0rwj/post_ecc.ini 2026-04-11 16:37:39,273 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0wmk0rwj/solo_L1_stix-cal-energy_20250310_V03U_ecc_in.fits 2026-04-11 16:47:07,601 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250310_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250310_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250310_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250310_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 16:47:13,877 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 16:47:13,885 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0wmk0rwj 2026-04-11 16:47:13,914 Soop found: SOOP 2026-04-11 16:47:13,914 Soop found: SOOP 2026-04-11 16:47:14,014 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/10/CAL/solo_CAL_stix-cal-energy_20250309T230555-20250310T230555_V02.fits 2026-04-11 16:47:14,177 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kr6ey4xq 2026-04-11 16:47:14,177 Read config from in: /tmp/ecc_context_ecc_cfg_1_kr6ey4xq/post_ecc.ini 2026-04-11 16:47:15,427 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kr6ey4xq/solo_L1_stix-cal-energy_20250301_V03U_ecc_in.fits 2026-04-11 16:56:46,305 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250301_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250301_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250301_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250301_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 16:56:52,876 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 16:56:52,886 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kr6ey4xq 2026-04-11 16:56:52,942 Soop found: SOOP 2026-04-11 16:56:53,046 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/01/CAL/solo_CAL_stix-cal-energy_20250228T230459-20250301T230459_V02.fits 2026-04-11 16:56:53,199 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xe869r86 2026-04-11 16:56:53,199 Read config from in: /tmp/ecc_context_ecc_cfg_1_xe869r86/post_ecc.ini 2026-04-11 16:56:54,480 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xe869r86/solo_L1_stix-cal-energy_20250324_V03U_ecc_in.fits 2026-04-11 17:06:13,662 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250324_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250324_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250324_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250324_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 17:06:21,883 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 17:06:21,890 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xe869r86 2026-04-11 17:06:21,915 Soop found: SOOP 2026-04-11 17:06:21,915 Soop found: SOOP 2026-04-11 17:06:22,009 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/24/CAL/solo_CAL_stix-cal-energy_20250324T020413-20250325T020413_V02.fits 2026-04-11 17:06:22,179 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_q9_99vgb 2026-04-11 17:06:22,180 Read config from in: /tmp/ecc_context_ecc_cfg_1_q9_99vgb/post_ecc.ini 2026-04-11 17:06:23,415 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_q9_99vgb/solo_L1_stix-cal-energy_20250308_V03U_ecc_in.fits 2026-04-11 17:15:58,230 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250308_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250308_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250308_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250308_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 17:16:04,562 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 17:16:04,569 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_q9_99vgb 2026-04-11 17:16:04,596 Soop found: SOOP 2026-04-11 17:16:04,596 Soop found: SOOP 2026-04-11 17:16:04,692 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/08/CAL/solo_CAL_stix-cal-energy_20250307T230542-20250308T230542_V02.fits 2026-04-11 17:16:04,868 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rrmj3iat 2026-04-11 17:16:04,869 Read config from in: /tmp/ecc_context_ecc_cfg_1_rrmj3iat/post_ecc.ini 2026-04-11 17:16:06,105 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rrmj3iat/solo_L1_stix-cal-energy_20250305_V03U_ecc_in.fits 2026-04-11 17:25:30,656 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250305_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250305_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250305_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250305_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 17:25:37,417 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 17:25:37,439 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rrmj3iat 2026-04-11 17:25:37,546 Soop found: SOOP 2026-04-11 17:25:37,684 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/05/CAL/solo_CAL_stix-cal-energy_20250304T230524-20250305T230523_V02.fits 2026-04-11 17:25:37,890 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__8v1mxhh 2026-04-11 17:25:37,890 Read config from in: /tmp/ecc_context_ecc_cfg_1__8v1mxhh/post_ecc.ini 2026-04-11 17:25:39,156 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__8v1mxhh/solo_L1_stix-cal-energy_20250314_V03U_ecc_in.fits 2026-04-11 17:35:35,941 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250314_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250314_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250314_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250314_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 17:35:42,250 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 17:35:42,256 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__8v1mxhh 2026-04-11 17:35:42,282 Soop found: SOOP 2026-04-11 17:35:42,282 Soop found: SOOP 2026-04-11 17:35:42,378 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/14/CAL/solo_CAL_stix-cal-energy_20250313T235452-20250314T235452_V02.fits 2026-04-11 17:35:42,547 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xcpav7kf 2026-04-11 17:35:42,548 Read config from in: /tmp/ecc_context_ecc_cfg_1_xcpav7kf/post_ecc.ini 2026-04-11 17:35:43,795 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xcpav7kf/solo_L1_stix-cal-energy_20250307_V03U_ecc_in.fits 2026-04-11 17:45:14,252 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250307_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250307_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250307_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250307_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 17:45:20,573 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 17:45:20,580 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xcpav7kf 2026-04-11 17:45:20,610 Soop found: SOOP 2026-04-11 17:45:20,709 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/07/CAL/solo_CAL_stix-cal-energy_20250306T230536-20250307T230535_V02.fits 2026-04-11 17:45:20,867 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b7wp3x5m 2026-04-11 17:45:20,868 Read config from in: /tmp/ecc_context_ecc_cfg_1_b7wp3x5m/post_ecc.ini 2026-04-11 17:45:22,112 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b7wp3x5m/solo_L1_stix-cal-energy_20250320_V03U_ecc_in.fits 2026-04-11 17:55:20,113 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250320_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250320_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250320_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250320_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 17:55:26,666 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 17:55:26,676 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b7wp3x5m 2026-04-11 17:55:26,738 Soop found: SOOP 2026-04-11 17:55:26,849 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/20/CAL/solo_CAL_stix-cal-energy_20250320T002200-20250321T002200_V02.fits 2026-04-11 17:55:27,025 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xbb4wn25 2026-04-11 17:55:27,026 Read config from in: /tmp/ecc_context_ecc_cfg_1_xbb4wn25/post_ecc.ini 2026-04-11 17:55:28,289 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xbb4wn25/solo_L1_stix-cal-energy_20250306_V03U_ecc_in.fits 2026-04-11 18:05:10,361 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250306_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250306_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250306_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250306_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 18:05:18,196 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 18:05:18,203 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xbb4wn25 2026-04-11 18:05:18,226 Soop found: SOOP 2026-04-11 18:05:18,321 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/06/CAL/solo_CAL_stix-cal-energy_20250305T230530-20250306T230530_V02.fits 2026-04-11 18:05:18,489 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bktpjqkh 2026-04-11 18:05:18,489 Read config from in: /tmp/ecc_context_ecc_cfg_1_bktpjqkh/post_ecc.ini 2026-04-11 18:05:19,734 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bktpjqkh/solo_L1_stix-cal-energy_20250303_V03U_ecc_in.fits 2026-04-11 18:14:54,945 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250303_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250303_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250303_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250303_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 18:15:01,263 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 18:15:01,269 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bktpjqkh 2026-04-11 18:15:01,293 Soop found: SOOP 2026-04-11 18:15:01,389 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/03/CAL/solo_CAL_stix-cal-energy_20250302T230511-20250303T230512_V02.fits 2026-04-11 18:15:01,552 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_plrs_mcm 2026-04-11 18:15:01,553 Read config from in: /tmp/ecc_context_ecc_cfg_1_plrs_mcm/post_ecc.ini 2026-04-11 18:15:02,791 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_plrs_mcm/solo_L1_stix-cal-energy_20250317_V03U_ecc_in.fits 2026-04-11 18:25:14,706 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250317_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250317_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250317_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250317_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 18:25:21,077 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-11 18:25:21,084 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_plrs_mcm 2026-04-11 18:25:21,114 Soop found: SOOP 2026-04-11 18:25:21,114 Soop found: SOOP 2026-04-11 18:25:21,216 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/17/CAL/solo_CAL_stix-cal-energy_20250316T235511-20250317T235511_V02.fits 2026-04-11 18:25:21,387 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ttsmxp4q 2026-04-11 18:25:21,387 Read config from in: /tmp/ecc_context_ecc_cfg_1_ttsmxp4q/post_ecc.ini 2026-04-11 18:25:22,644 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ttsmxp4q/solo_L1_stix-cal-energy_20250331_V03U_ecc_in.fits 2026-04-11 18:35:41,571 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250331_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250331_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250331_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250331_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 18:35:48,762 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 18:35:48,772 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ttsmxp4q 2026-04-11 18:35:48,811 Soop found: SOOP 2026-04-11 18:35:48,923 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/31/CAL/solo_CAL_stix-cal-energy_20250331T003127-20250401T003142_V02.fits 2026-04-11 18:35:49,116 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p1u7mhet 2026-04-11 18:35:49,117 Read config from in: /tmp/ecc_context_ecc_cfg_1_p1u7mhet/post_ecc.ini 2026-04-11 18:35:50,384 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p1u7mhet/solo_L1_stix-cal-energy_20250318_V03U_ecc_in.fits 2026-04-11 18:46:06,555 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250318_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250318_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250318_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250318_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 18:46:12,896 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-11 18:46:12,903 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_p1u7mhet 2026-04-11 18:46:12,931 Soop found: SOOP 2026-04-11 18:46:12,931 Soop found: SOOP 2026-04-11 18:46:13,030 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/18/CAL/solo_CAL_stix-cal-energy_20250317T235518-20250318T235518_V02.fits 2026-04-11 18:46:13,204 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8jvnsuuu 2026-04-11 18:46:13,205 Read config from in: /tmp/ecc_context_ecc_cfg_1_8jvnsuuu/post_ecc.ini 2026-04-11 18:46:14,459 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8jvnsuuu/solo_L1_stix-cal-energy_20250323_V03U_ecc_in.fits 2026-04-11 18:55:41,471 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250323_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250323_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250323_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250323_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 18:55:47,829 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 18:55:47,837 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8jvnsuuu 2026-04-11 18:55:47,871 Soop found: SOOP 2026-04-11 18:55:47,871 Soop found: SOOP 2026-04-11 18:55:47,871 Soop found: SOOP 2026-04-11 18:55:47,871 Soop found: SOOP 2026-04-11 18:55:47,973 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/23/CAL/solo_CAL_stix-cal-energy_20250323T011146-20250324T011246_V02.fits 2026-04-11 18:55:48,144 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7hz0n0nw 2026-04-11 18:55:48,145 Read config from in: /tmp/ecc_context_ecc_cfg_1_7hz0n0nw/post_ecc.ini 2026-04-11 18:55:51,052 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7hz0n0nw/solo_L1_stix-cal-energy_20250316_V03U_ecc_in.fits 2026-04-11 19:05:58,857 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250316_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250316_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250316_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250316_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 19:06:05,231 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 19:06:05,239 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7hz0n0nw 2026-04-11 19:06:05,268 Soop found: SOOP 2026-04-11 19:06:05,366 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/16/CAL/solo_CAL_stix-cal-energy_20250315T235505-20250316T235505_V02.fits 2026-04-11 19:06:05,551 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0nibavz8 2026-04-11 19:06:05,552 Read config from in: /tmp/ecc_context_ecc_cfg_1_0nibavz8/post_ecc.ini 2026-04-11 19:06:06,804 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0nibavz8/solo_L1_stix-cal-energy_20250321_V03U_ecc_in.fits 2026-04-11 19:15:46,045 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250321_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250321_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250321_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250321_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 19:15:52,381 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 19:15:52,388 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_0nibavz8 2026-04-11 19:15:52,414 Soop found: SOOP 2026-04-11 19:15:52,414 Soop found: SOOP 2026-04-11 19:15:52,414 Soop found: SOOP 2026-04-11 19:15:52,518 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/21/CAL/solo_CAL_stix-cal-energy_20250321T002206-20250322T003803_V02.fits 2026-04-11 19:15:52,681 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_m1_dmeto 2026-04-11 19:15:52,682 Read config from in: /tmp/ecc_context_ecc_cfg_1_m1_dmeto/post_ecc.ini 2026-04-11 19:15:53,963 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_m1_dmeto/solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits 2026-04-11 19:25:27,018 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 19:25:33,256 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 19:25:33,263 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_m1_dmeto 2026-04-11 19:25:33,293 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sji3b4hc 2026-04-11 19:25:33,294 Read config from in: /tmp/ecc_context_ecc_cfg_1_sji3b4hc/post_ecc.ini 2026-04-11 19:25:34,569 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sji3b4hc/solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits 2026-04-11 19:33:36,628 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250312_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 19:33:50,176 Run ecc post fit: replaced [94.8 %] gain offset pairs with 'better fits' 2026-04-11 19:33:50,182 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,183 ECC result Gain_Prime 0.0 for DET 2 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,183 ECC result Gain_Prime 0.0 for DET 5 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,183 ECC result Gain_Prime 0.0 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,183 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,183 ECC result Gain_Prime 0.0 for DET 10 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,183 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,183 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,183 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 22 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 24 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 25 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 27 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 27 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 29 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 29 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,184 ECC result Gain_Prime 0.0 for DET 30 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,185 ECC result Gain_Prime 0.0 for DET 30 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,185 ECC result Gain_Prime 0.0 for DET 32 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 19:33:50,202 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sji3b4hc 2026-04-11 19:33:50,298 Soop found: SOOP 2026-04-11 19:33:50,300 Soop found: SOOP 2026-04-11 19:33:50,300 Soop found: SOOP 2026-04-11 19:33:50,300 Soop found: SOOP 2026-04-11 19:33:50,433 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/12/CAL/solo_CAL_stix-cal-energy_20250311T230607-20250312T230607_V02.fits 2026-04-11 19:33:50,471 Soop found: SOOP 2026-04-11 19:33:50,566 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/12/CAL/solo_CAL_stix-cal-energy_20250312T230613-20250312T235038_V02.fits 2026-04-11 19:33:50,760 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_su9_3hy_ 2026-04-11 19:33:50,760 Read config from in: /tmp/ecc_context_ecc_cfg_1_su9_3hy_/post_ecc.ini 2026-04-11 19:33:52,024 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_su9_3hy_/solo_L1_stix-cal-energy_20250327_V03U_ecc_in.fits 2026-04-11 19:43:51,889 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250327_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250327_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250327_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250327_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 19:43:58,148 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 19:43:58,157 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_su9_3hy_ 2026-04-11 19:43:58,184 Soop found: SOOP 2026-04-11 19:43:58,184 Soop found: SOOP 2026-04-11 19:43:58,184 Soop found: SOOP 2026-04-11 19:43:58,185 Soop found: SOOP 2026-04-11 19:43:58,284 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/27/CAL/solo_CAL_stix-cal-energy_20250327T022601-20250328T022601_V02.fits 2026-04-11 19:43:58,450 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ij34jfki 2026-04-11 19:43:58,451 Read config from in: /tmp/ecc_context_ecc_cfg_1_ij34jfki/post_ecc.ini 2026-04-11 19:43:59,699 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ij34jfki/solo_L1_stix-cal-energy_20250311_V03U_ecc_in.fits 2026-04-11 19:53:30,461 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250311_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250311_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250311_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250311_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 19:53:38,390 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 19:53:38,397 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ij34jfki 2026-04-11 19:53:38,422 Soop found: SOOP 2026-04-11 19:53:38,422 Soop found: SOOP 2026-04-11 19:53:38,422 Soop found: SOOP 2026-04-11 19:53:38,422 Soop found: SOOP 2026-04-11 19:53:38,422 Soop found: SOOP 2026-04-11 19:53:38,518 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/11/CAL/solo_CAL_stix-cal-energy_20250310T230601-20250311T230601_V02.fits 2026-04-11 19:53:38,685 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kiyzvpcf 2026-04-11 19:53:38,685 Read config from in: /tmp/ecc_context_ecc_cfg_1_kiyzvpcf/post_ecc.ini 2026-04-11 19:53:39,940 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kiyzvpcf/solo_L1_stix-cal-energy_20250326_V03U_ecc_in.fits 2026-04-11 20:03:11,009 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250326_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250326_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250326_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250326_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 20:03:17,384 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 20:03:17,399 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kiyzvpcf 2026-04-11 20:03:17,457 Soop found: SOOP 2026-04-11 20:03:17,568 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/26/CAL/solo_CAL_stix-cal-energy_20250326T022556-20250327T022555_V02.fits 2026-04-11 20:03:17,763 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vd2agc60 2026-04-11 20:03:17,763 Read config from in: /tmp/ecc_context_ecc_cfg_1_vd2agc60/post_ecc.ini 2026-04-11 20:03:18,996 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vd2agc60/solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits 2026-04-11 20:12:59,603 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 20:13:05,923 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 20:13:05,930 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vd2agc60 2026-04-11 20:13:05,962 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c_vf_323 2026-04-11 20:13:05,963 Read config from in: /tmp/ecc_context_ecc_cfg_1_c_vf_323/post_ecc.ini 2026-04-11 20:13:07,213 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c_vf_323/solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits 2026-04-11 20:16:20,889 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250319_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 20:18:26,726 Run ecc post fit: replaced [62.2 %] gain offset pairs with 'better fits' 2026-04-11 20:18:26,728 ECC result Gain_Prime 1.6029110360127325 for DET 1 PIX 7 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,728 ECC result Gain_Prime 1.6152522932999207 for DET 4 PIX 5 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,729 ECC result Gain_Prime 1.6152522932999207 for DET 4 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,729 ECC result Gain_Prime 1.6152522932999207 for DET 9 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,729 ECC result Gain_Prime 1.6152522932999207 for DET 11 PIX 3 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,729 ECC result Gain_Prime 1.6173472156964197 for DET 26 PIX 0 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,729 ECC result Gain_Prime 1.605635020319646 for DET 29 PIX 3 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,729 ECC result Gain_Prime 1.6152522932999207 for DET 29 PIX 7 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,729 ECC result Gain_Prime 1.605635020319646 for DET 31 PIX 1 exceeds Max_Gain 1.4, but not in ignore list 2026-04-11 20:18:26,730 ECC result Gain_Prime 0.0 for DET 1 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,730 ECC result Gain_Prime 0.0 for DET 1 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,730 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,730 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,730 ECC result Gain_Prime 0.0 for DET 2 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,730 ECC result Gain_Prime 0.0 for DET 2 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,730 ECC result Gain_Prime 0.0 for DET 2 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,730 ECC result Gain_Prime 0.0 for DET 2 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 2 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 3 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 3 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 4 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 4 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 4 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 5 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 5 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 5 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,731 ECC result Gain_Prime 0.0 for DET 5 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 5 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 6 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 6 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 6 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 6 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 7 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 7 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 7 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 7 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,732 ECC result Gain_Prime 0.0 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 8 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 8 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 8 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 9 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 9 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 9 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 9 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 9 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 10 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,733 ECC result Gain_Prime 0.0 for DET 10 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 10 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 10 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 10 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 11 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 11 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 11 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 11 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 12 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 12 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 12 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,734 ECC result Gain_Prime 0.0 for DET 12 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 12 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 12 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 13 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 13 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 14 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 14 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 14 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 14 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 14 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,735 ECC result Gain_Prime 0.0 for DET 15 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 15 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 15 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 15 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 16 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 16 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 16 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 16 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 16 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 17 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,736 ECC result Gain_Prime 0.0 for DET 17 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 17 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 17 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 17 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 17 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 17 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 17 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 18 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 18 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,737 ECC result Gain_Prime 0.0 for DET 19 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 19 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 19 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 19 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 20 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 20 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 20 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 20 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 20 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 21 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,738 ECC result Gain_Prime 0.0 for DET 21 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 22 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 22 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 22 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 22 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 22 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 23 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 23 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 23 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 23 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,739 ECC result Gain_Prime 0.0 for DET 24 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 24 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 24 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 25 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 25 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 25 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 25 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 25 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 26 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,740 ECC result Gain_Prime 0.0 for DET 26 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 26 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 26 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 26 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 27 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 27 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 27 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 27 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 27 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 28 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,741 ECC result Gain_Prime 0.0 for DET 28 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 28 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 29 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 29 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 30 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 30 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 31 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 31 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 31 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 31 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,742 ECC result Gain_Prime 0.0 for DET 31 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,743 ECC result Gain_Prime 0.0 for DET 31 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,743 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,743 ECC result Gain_Prime 0.0 for DET 32 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,743 ECC result Gain_Prime 0.0 for DET 32 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,743 ECC result Gain_Prime 0.0 for DET 32 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,743 ECC result Gain_Prime 0.0 for DET 32 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-11 20:18:26,748 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c_vf_323 2026-04-11 20:18:26,774 Soop found: SOOP 2026-04-11 20:18:26,775 Soop found: SOOP 2026-04-11 20:18:26,775 Soop found: SOOP 2026-04-11 20:18:26,775 Soop found: SOOP 2026-04-11 20:18:26,870 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/19/CAL/solo_CAL_stix-cal-energy_20250318T235524-20250319T235525_V02.fits 2026-04-11 20:18:26,906 Soop found: SOOP 2026-04-11 20:18:26,997 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/19/CAL/solo_CAL_stix-cal-energy_20250319T235531-20250320T000002_V02.fits 2026-04-11 20:18:27,166 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xisenbz7 2026-04-11 20:18:27,166 Read config from in: /tmp/ecc_context_ecc_cfg_1_xisenbz7/post_ecc.ini 2026-04-11 20:18:28,409 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xisenbz7/solo_L1_stix-cal-energy_20250322_V03U_ecc_in.fits 2026-04-11 20:28:00,034 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250322_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250322_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250322_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250322_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 20:28:06,265 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 20:28:06,272 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xisenbz7 2026-04-11 20:28:06,299 Soop found: SOOP 2026-04-11 20:28:06,299 Soop found: SOOP 2026-04-11 20:28:06,299 Soop found: SOOP 2026-04-11 20:28:06,395 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/22/CAL/solo_CAL_stix-cal-energy_20250322T011140-20250323T011140_V02.fits 2026-04-11 20:28:06,558 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_28n8ziiq 2026-04-11 20:28:06,559 Read config from in: /tmp/ecc_context_ecc_cfg_1_28n8ziiq/post_ecc.ini 2026-04-11 20:28:07,801 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_28n8ziiq/solo_L1_stix-cal-energy_20250325_V03U_ecc_in.fits 2026-04-11 20:37:28,689 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250325_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250325_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250325_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250325_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 20:37:37,127 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 20:37:37,135 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_28n8ziiq 2026-04-11 20:37:37,163 Soop found: SOOP 2026-04-11 20:37:37,259 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/25/CAL/solo_CAL_stix-cal-energy_20250325T021154-20250326T022546_V02.fits 2026-04-11 20:37:37,413 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ysb9lb_u 2026-04-11 20:37:37,414 Read config from in: /tmp/ecc_context_ecc_cfg_1_ysb9lb_u/post_ecc.ini 2026-04-11 20:37:38,644 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ysb9lb_u/solo_L1_stix-cal-energy_20250328_V03U_ecc_in.fits 2026-04-11 20:47:50,028 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250328_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250328_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250328_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250328_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 20:47:56,268 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 20:47:56,275 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ysb9lb_u 2026-04-11 20:47:56,306 Soop found: SOOP 2026-04-11 20:47:56,306 Soop found: SOOP 2026-04-11 20:47:56,411 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/28/CAL/solo_CAL_stix-cal-energy_20250328T022607-20250329T000002_V02.fits 2026-04-11 20:47:56,568 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ui_0y2gi 2026-04-11 20:47:56,569 Read config from in: /tmp/ecc_context_ecc_cfg_1_ui_0y2gi/post_ecc.ini 2026-04-11 20:47:57,822 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ui_0y2gi/solo_L1_stix-cal-energy_20250309_V03U_ecc_in.fits 2026-04-11 20:57:34,597 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250309_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250309_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250309_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250309_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 20:57:40,819 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 20:57:40,826 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ui_0y2gi 2026-04-11 20:57:40,852 Soop found: SOOP 2026-04-11 20:57:40,852 Soop found: SOOP 2026-04-11 20:57:40,949 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/09/CAL/solo_CAL_stix-cal-energy_20250308T230547-20250309T230548_V02.fits 2026-04-11 20:57:41,120 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_37y5sxln 2026-04-11 20:57:41,121 Read config from in: /tmp/ecc_context_ecc_cfg_1_37y5sxln/post_ecc.ini 2026-04-11 20:57:42,362 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_37y5sxln/solo_L1_stix-cal-energy_20250329_V03U_ecc_in.fits 2026-04-11 21:08:03,954 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250329_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250329_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250329_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250329_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 21:08:10,492 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-11 21:08:10,508 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_37y5sxln 2026-04-11 21:08:10,581 Soop found: SOOP 2026-04-11 21:08:10,583 Soop found: SOOP 2026-04-11 21:08:10,583 Soop found: SOOP 2026-04-11 21:08:10,698 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/29/CAL/solo_CAL_stix-cal-energy_20250329T000411-20250330T000411_V02.fits 2026-04-11 21:08:10,877 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wng1gw1q 2026-04-11 21:08:10,878 Read config from in: /tmp/ecc_context_ecc_cfg_1_wng1gw1q/post_ecc.ini 2026-04-11 21:08:12,119 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wng1gw1q/solo_L1_stix-cal-energy_20250302_V03U_ecc_in.fits 2026-04-11 21:17:55,507 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250302_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250302_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250302_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250302_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 21:18:01,957 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 21:18:01,964 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wng1gw1q 2026-04-11 21:18:01,993 Soop found: SOOP 2026-04-11 21:18:02,088 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/02/CAL/solo_CAL_stix-cal-energy_20250301T230505-20250302T230505_V02.fits 2026-04-11 21:18:02,254 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gqwx_5pb 2026-04-11 21:18:02,254 Read config from in: /tmp/ecc_context_ecc_cfg_1_gqwx_5pb/post_ecc.ini 2026-04-11 21:18:03,504 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gqwx_5pb/solo_L1_stix-cal-energy_20250313_V03U_ecc_in.fits 2026-04-11 21:27:42,478 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250313_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250313_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250313_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250313_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 21:27:48,933 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 21:27:48,940 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gqwx_5pb 2026-04-11 21:27:48,972 Soop found: SOOP 2026-04-11 21:27:48,972 Soop found: SOOP 2026-04-11 21:27:48,973 Soop found: SOOP 2026-04-11 21:27:49,069 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/13/CAL/solo_CAL_stix-cal-energy_20250312T235446-20250313T235446_V02.fits 2026-04-11 21:27:49,212 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_aovffbrr 2026-04-11 21:27:49,213 Read config from in: /tmp/ecc_context_ecc_cfg_1_aovffbrr/post_ecc.ini 2026-04-11 21:27:52,047 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_aovffbrr/solo_L1_stix-cal-energy_20250315_V03U_ecc_in.fits 2026-04-11 21:37:56,083 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250315_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250315_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250315_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250315_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 21:38:02,353 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 21:38:02,360 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_aovffbrr 2026-04-11 21:38:02,388 Soop found: SOOP 2026-04-11 21:38:02,388 Soop found: SOOP 2026-04-11 21:38:02,488 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/15/CAL/solo_CAL_stix-cal-energy_20250314T235458-20250315T235459_V02.fits 2026-04-11 21:38:02,652 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ormcij11 2026-04-11 21:38:02,653 Read config from in: /tmp/ecc_context_ecc_cfg_1_ormcij11/post_ecc.ini 2026-04-11 21:38:03,889 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ormcij11/solo_L1_stix-cal-energy_20250304_V03U_ecc_in.fits 2026-04-11 21:47:27,368 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250304_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250304_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250304_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250304_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 21:47:33,722 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 21:47:33,730 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ormcij11 2026-04-11 21:47:33,761 Soop found: SOOP 2026-04-11 21:47:33,855 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/03/04/CAL/solo_CAL_stix-cal-energy_20250303T230518-20250304T230518_V02.fits 2026-04-11 21:47:34,028 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_wapftc8c 2026-04-11 21:47:34,029 Read config from in: /tmp/ecc_context_ecc_cfg_1_wapftc8c/post_ecc.ini 2026-04-11 21:47:35,275 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_wapftc8c/solo_L1_stix-cal-energy_20251230_V03U_ecc_in.fits 2026-04-11 21:56:41,856 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251230_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251230_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251230_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251230_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 21:56:48,312 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 21:56:48,324 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_wapftc8c 2026-04-11 21:56:48,398 Soop found: SOOP 2026-04-11 21:56:48,529 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/30/CAL/solo_CAL_stix-cal-energy_20251230T022226-20251231T022225_V02.fits 2026-04-11 21:56:48,713 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nonfte1i 2026-04-11 21:56:48,714 Read config from in: /tmp/ecc_context_ecc_cfg_1_nonfte1i/post_ecc.ini 2026-04-11 21:56:49,956 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nonfte1i/solo_L1_stix-cal-energy_20251210_V03U_ecc_in.fits 2026-04-11 22:06:19,103 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251210_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251210_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251210_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251210_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 22:06:25,391 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 22:06:25,398 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nonfte1i 2026-04-11 22:06:25,425 Soop found: SOOP 2026-04-11 22:06:25,425 Soop found: SOOP 2026-04-11 22:06:25,529 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/10/CAL/solo_CAL_stix-cal-energy_20251210T062211-20251211T062210_V02.fits 2026-04-11 22:06:25,694 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vnfx3e9t 2026-04-11 22:06:25,694 Read config from in: /tmp/ecc_context_ecc_cfg_1_vnfx3e9t/post_ecc.ini 2026-04-11 22:06:26,948 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vnfx3e9t/solo_L1_stix-cal-energy_20251201_V03U_ecc_in.fits 2026-04-11 22:16:04,299 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251201_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251201_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251201_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251201_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 22:16:10,723 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 22:16:10,730 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vnfx3e9t 2026-04-11 22:16:10,758 Soop found: SOOP 2026-04-11 22:16:10,860 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/01/CAL/solo_CAL_stix-cal-energy_20251201T032302-20251202T032303_V02.fits 2026-04-11 22:16:11,030 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jyf7mv4v 2026-04-11 22:16:11,031 Read config from in: /tmp/ecc_context_ecc_cfg_1_jyf7mv4v/post_ecc.ini 2026-04-11 22:16:12,286 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jyf7mv4v/solo_L1_stix-cal-energy_20251224_V03U_ecc_in.fits 2026-04-11 22:25:28,509 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251224_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251224_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251224_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251224_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 22:25:34,933 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 22:25:34,942 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jyf7mv4v 2026-04-11 22:25:35,007 Soop found: SOOP 2026-04-11 22:25:35,128 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/24/CAL/solo_CAL_stix-cal-energy_20251224T055500-20251225T055500_V02.fits 2026-04-11 22:25:36,811 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gad4iz1k 2026-04-11 22:25:36,812 Read config from in: /tmp/ecc_context_ecc_cfg_1_gad4iz1k/post_ecc.ini 2026-04-11 22:25:38,052 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gad4iz1k/solo_L1_stix-cal-energy_20251208_V03U_ecc_in.fits 2026-04-11 22:35:04,411 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251208_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251208_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251208_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251208_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 22:35:11,461 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 22:35:11,468 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gad4iz1k 2026-04-11 22:35:11,499 Soop found: SOOP 2026-04-11 22:35:11,602 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/08/CAL/solo_CAL_stix-cal-energy_20251208T062159-20251209T062158_V02.fits 2026-04-11 22:35:11,779 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tyz4d9v6 2026-04-11 22:35:11,780 Read config from in: /tmp/ecc_context_ecc_cfg_1_tyz4d9v6/post_ecc.ini 2026-04-11 22:35:13,047 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tyz4d9v6/solo_L1_stix-cal-energy_20251205_V03U_ecc_in.fits 2026-04-11 22:44:35,279 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251205_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251205_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251205_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251205_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 22:44:41,583 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 22:44:41,590 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tyz4d9v6 2026-04-11 22:44:41,617 Soop found: SOOP 2026-04-11 22:44:41,717 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/05/CAL/solo_CAL_stix-cal-energy_20251205T050938-20251206T050937_V02.fits 2026-04-11 22:44:41,889 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bf6tskr_ 2026-04-11 22:44:41,890 Read config from in: /tmp/ecc_context_ecc_cfg_1_bf6tskr_/post_ecc.ini 2026-04-11 22:44:43,127 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bf6tskr_/solo_L1_stix-cal-energy_20251214_V03U_ecc_in.fits 2026-04-11 22:54:08,687 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251214_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251214_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 22:54:14,969 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 22:54:14,976 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bf6tskr_ 2026-04-11 22:54:15,003 Soop found: SOOP 2026-04-11 22:54:15,003 Soop found: SOOP 2026-04-11 22:54:15,003 Soop found: SOOP 2026-04-11 22:54:15,098 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/14/CAL/solo_CAL_stix-cal-energy_20251214T062235-20251215T030002_V02.fits 2026-04-11 22:54:15,259 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jyg6ah9y 2026-04-11 22:54:15,260 Read config from in: /tmp/ecc_context_ecc_cfg_1_jyg6ah9y/post_ecc.ini 2026-04-11 22:54:16,555 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jyg6ah9y/solo_L1_stix-cal-energy_20251207_V03U_ecc_in.fits 2026-04-11 23:03:28,331 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251207_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251207_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251207_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251207_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 23:03:34,698 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 23:03:34,706 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jyg6ah9y 2026-04-11 23:03:34,735 Soop found: SOOP 2026-04-11 23:03:34,735 Soop found: SOOP 2026-04-11 23:03:34,835 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/07/CAL/solo_CAL_stix-cal-energy_20251207T050949-20251208T055251_V02.fits 2026-04-11 23:03:35,011 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7mq7jece 2026-04-11 23:03:35,012 Read config from in: /tmp/ecc_context_ecc_cfg_1_7mq7jece/post_ecc.ini 2026-04-11 23:03:36,258 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7mq7jece/solo_L1_stix-cal-energy_20251220_V03U_ecc_in.fits 2026-04-11 23:12:54,875 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251220_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251220_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251220_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251220_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 23:13:01,218 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 23:13:01,225 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7mq7jece 2026-04-11 23:13:01,253 Soop found: SOOP 2026-04-11 23:13:01,350 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/20/CAL/solo_CAL_stix-cal-energy_20251220T044915-20251221T050027_V02.fits 2026-04-11 23:13:01,517 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k5_ox9zu 2026-04-11 23:13:01,518 Read config from in: /tmp/ecc_context_ecc_cfg_1_k5_ox9zu/post_ecc.ini 2026-04-11 23:13:02,751 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k5_ox9zu/solo_L1_stix-cal-energy_20251206_V03U_ecc_in.fits 2026-04-11 23:22:21,778 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251206_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251206_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251206_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251206_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 23:22:29,962 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 23:22:29,969 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k5_ox9zu 2026-04-11 23:22:29,994 Soop found: SOOP 2026-04-11 23:22:30,088 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/06/CAL/solo_CAL_stix-cal-energy_20251206T050943-20251207T050943_V02.fits 2026-04-11 23:22:30,255 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rouzbo_h 2026-04-11 23:22:30,255 Read config from in: /tmp/ecc_context_ecc_cfg_1_rouzbo_h/post_ecc.ini 2026-04-11 23:22:31,490 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rouzbo_h/solo_L1_stix-cal-energy_20251203_V03U_ecc_in.fits 2026-04-11 23:31:53,815 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251203_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251203_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251203_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251203_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 23:32:00,169 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 23:32:00,176 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rouzbo_h 2026-04-11 23:32:00,201 Soop found: SOOP 2026-04-11 23:32:00,299 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/03/CAL/solo_CAL_stix-cal-energy_20251203T043306-20251204T044352_V02.fits 2026-04-11 23:32:00,463 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__hq1hmbo 2026-04-11 23:32:00,464 Read config from in: /tmp/ecc_context_ecc_cfg_1__hq1hmbo/post_ecc.ini 2026-04-11 23:32:01,700 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__hq1hmbo/solo_L1_stix-cal-energy_20251217_V03U_ecc_in.fits 2026-04-11 23:41:19,085 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251217_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251217_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251217_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251217_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 23:41:25,472 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 23:41:25,478 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__hq1hmbo 2026-04-11 23:41:25,508 Soop found: SOOP 2026-04-11 23:41:25,606 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/17/CAL/solo_CAL_stix-cal-energy_20251217T030830-20251218T044856_V02.fits 2026-04-11 23:41:25,814 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_35qtqxtq 2026-04-11 23:41:25,814 Read config from in: /tmp/ecc_context_ecc_cfg_1_35qtqxtq/post_ecc.ini 2026-04-11 23:41:27,176 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_35qtqxtq/solo_L1_stix-cal-energy_20251231_V03U_ecc_in.fits 2026-04-11 23:50:44,053 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251231_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251231_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251231_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251231_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-11 23:50:50,391 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-11 23:50:50,398 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_35qtqxtq 2026-04-11 23:50:50,425 Soop found: SOOP 2026-04-11 23:50:50,525 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/31/CAL/solo_CAL_stix-cal-energy_20251231T022232-20260101T023736_V02.fits 2026-04-11 23:50:50,694 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__g6vv8ly 2026-04-11 23:50:50,695 Read config from in: /tmp/ecc_context_ecc_cfg_1__g6vv8ly/post_ecc.ini 2026-04-11 23:50:51,935 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__g6vv8ly/solo_L1_stix-cal-energy_20251218_V03U_ecc_in.fits 2026-04-12 00:00:17,662 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251218_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251218_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251218_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251218_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 00:00:24,017 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 00:00:24,025 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__g6vv8ly 2026-04-12 00:00:24,053 Soop found: SOOP 2026-04-12 00:00:24,150 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/18/CAL/solo_CAL_stix-cal-energy_20251218T044902-20251219T044901_V02.fits 2026-04-12 00:00:24,313 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1myha1lz 2026-04-12 00:00:24,314 Read config from in: /tmp/ecc_context_ecc_cfg_1_1myha1lz/post_ecc.ini 2026-04-12 00:00:25,553 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1myha1lz/solo_L1_stix-cal-energy_20251223_V03U_ecc_in.fits 2026-04-12 00:09:43,618 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251223_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251223_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251223_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251223_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 00:09:49,979 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 00:09:49,986 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1myha1lz 2026-04-12 00:09:50,016 Soop found: SOOP 2026-04-12 00:09:50,111 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/23/CAL/solo_CAL_stix-cal-energy_20251223T055455-20251224T055454_V02.fits 2026-04-12 00:09:50,281 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vyh16ekj 2026-04-12 00:09:50,282 Read config from in: /tmp/ecc_context_ecc_cfg_1_vyh16ekj/post_ecc.ini 2026-04-12 00:09:53,200 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vyh16ekj/solo_L1_stix-cal-energy_20251216_V03U_ecc_in.fits 2026-04-12 00:19:02,823 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251216_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251216_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251216_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251216_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 00:19:09,250 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 00:19:09,257 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vyh16ekj 2026-04-12 00:19:09,284 Soop found: SOOP 2026-04-12 00:19:09,285 Soop found: SOOP 2026-04-12 00:19:09,385 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/16/CAL/solo_CAL_stix-cal-energy_20251216T030507-20251217T030824_V02.fits 2026-04-12 00:19:09,553 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dcgwwhe1 2026-04-12 00:19:09,554 Read config from in: /tmp/ecc_context_ecc_cfg_1_dcgwwhe1/post_ecc.ini 2026-04-12 00:19:10,782 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dcgwwhe1/solo_L1_stix-cal-energy_20251221_V03U_ecc_in.fits 2026-04-12 00:28:27,549 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251221_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251221_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251221_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251221_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 00:28:34,036 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 00:28:34,043 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dcgwwhe1 2026-04-12 00:28:34,071 Soop found: SOOP 2026-04-12 00:28:34,071 Soop found: SOOP 2026-04-12 00:28:34,170 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/21/CAL/solo_CAL_stix-cal-energy_20251221T051443-20251222T055443_V02.fits 2026-04-12 00:28:34,337 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x1y7m04y 2026-04-12 00:28:34,337 Read config from in: /tmp/ecc_context_ecc_cfg_1_x1y7m04y/post_ecc.ini 2026-04-12 00:28:35,590 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x1y7m04y/solo_L1_stix-cal-energy_20251212_V03U_ecc_in.fits 2026-04-12 00:38:07,816 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251212_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251212_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251212_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251212_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 00:38:14,907 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 00:38:14,915 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x1y7m04y 2026-04-12 00:38:14,969 Soop found: SOOP 2026-04-12 00:38:14,970 Soop found: SOOP 2026-04-12 00:38:15,086 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/12/CAL/solo_CAL_stix-cal-energy_20251212T062222-20251213T062222_V02.fits 2026-04-12 00:38:15,297 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pda2o_hq 2026-04-12 00:38:15,298 Read config from in: /tmp/ecc_context_ecc_cfg_1_pda2o_hq/post_ecc.ini 2026-04-12 00:38:16,573 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pda2o_hq/solo_L1_stix-cal-energy_20251227_V03U_ecc_in.fits 2026-04-12 00:47:36,876 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251227_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251227_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251227_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251227_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 00:47:43,178 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 00:47:43,185 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pda2o_hq 2026-04-12 00:47:43,214 Soop found: SOOP 2026-04-12 00:47:43,313 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/27/CAL/solo_CAL_stix-cal-energy_20251227T080948-20251228T080947_V02.fits 2026-04-12 00:47:43,485 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_08tk5p0w 2026-04-12 00:47:43,485 Read config from in: /tmp/ecc_context_ecc_cfg_1_08tk5p0w/post_ecc.ini 2026-04-12 00:47:44,736 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_08tk5p0w/solo_L1_stix-cal-energy_20251211_V03U_ecc_in.fits 2026-04-12 00:57:01,597 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251211_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251211_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251211_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251211_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 00:57:07,968 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 00:57:07,975 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_08tk5p0w 2026-04-12 00:57:08,004 Soop found: SOOP 2026-04-12 00:57:08,004 Soop found: SOOP 2026-04-12 00:57:08,104 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/11/CAL/solo_CAL_stix-cal-energy_20251211T062217-20251212T062216_V02.fits 2026-04-12 00:57:08,293 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1thix0rh 2026-04-12 00:57:08,294 Read config from in: /tmp/ecc_context_ecc_cfg_1_1thix0rh/post_ecc.ini 2026-04-12 00:57:09,532 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1thix0rh/solo_L1_stix-cal-energy_20251226_V03U_ecc_in.fits 2026-04-12 01:06:36,007 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251226_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251226_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251226_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251226_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 01:06:44,432 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 01:06:44,440 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1thix0rh 2026-04-12 01:06:44,467 Soop found: SOOP 2026-04-12 01:06:44,563 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/26/CAL/solo_CAL_stix-cal-energy_20251226T055513-20251227T061437_V02.fits 2026-04-12 01:06:44,768 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d8v1y7sv 2026-04-12 01:06:44,769 Read config from in: /tmp/ecc_context_ecc_cfg_1_d8v1y7sv/post_ecc.ini 2026-04-12 01:06:45,997 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d8v1y7sv/solo_L1_stix-cal-energy_20251219_V03U_ecc_in.fits 2026-04-12 01:16:13,810 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251219_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251219_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251219_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251219_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 01:16:20,079 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 01:16:20,086 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d8v1y7sv 2026-04-12 01:16:20,113 Soop found: SOOP 2026-04-12 01:16:20,207 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/19/CAL/solo_CAL_stix-cal-energy_20251219T044908-20251220T044909_V02.fits 2026-04-12 01:16:20,378 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zypa44lm 2026-04-12 01:16:20,378 Read config from in: /tmp/ecc_context_ecc_cfg_1_zypa44lm/post_ecc.ini 2026-04-12 01:16:21,614 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zypa44lm/solo_L1_stix-cal-energy_20251222_V03U_ecc_in.fits 2026-04-12 01:25:57,099 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251222_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251222_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251222_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251222_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 01:26:03,395 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 01:26:03,402 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zypa44lm 2026-04-12 01:26:03,431 Soop found: SOOP 2026-04-12 01:26:03,527 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/22/CAL/solo_CAL_stix-cal-energy_20251222T055449-20251223T055448_V02.fits 2026-04-12 01:26:03,698 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cwl472dx 2026-04-12 01:26:03,699 Read config from in: /tmp/ecc_context_ecc_cfg_1_cwl472dx/post_ecc.ini 2026-04-12 01:26:04,935 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cwl472dx/solo_L1_stix-cal-energy_20251225_V03U_ecc_in.fits 2026-04-12 01:35:21,987 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251225_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251225_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251225_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251225_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 01:35:28,395 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 01:35:28,402 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cwl472dx 2026-04-12 01:35:28,430 Soop found: SOOP 2026-04-12 01:35:28,527 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/25/CAL/solo_CAL_stix-cal-energy_20251225T055506-20251226T055507_V02.fits 2026-04-12 01:35:28,697 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oo78l661 2026-04-12 01:35:28,697 Read config from in: /tmp/ecc_context_ecc_cfg_1_oo78l661/post_ecc.ini 2026-04-12 01:35:29,929 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oo78l661/solo_L1_stix-cal-energy_20251228_V03U_ecc_in.fits 2026-04-12 01:44:49,766 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251228_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251228_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251228_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251228_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 01:44:56,219 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 01:44:56,226 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_oo78l661 2026-04-12 01:44:56,254 Soop found: SOOP 2026-04-12 01:44:56,254 Soop found: SOOP 2026-04-12 01:44:56,349 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/28/CAL/solo_CAL_stix-cal-energy_20251228T080954-20251229T000002_V02.fits 2026-04-12 01:44:56,515 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1qwuz_yn 2026-04-12 01:44:56,516 Read config from in: /tmp/ecc_context_ecc_cfg_1_1qwuz_yn/post_ecc.ini 2026-04-12 01:44:57,844 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1qwuz_yn/solo_L1_stix-cal-energy_20251209_V03U_ecc_in.fits 2026-04-12 01:54:05,680 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251209_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251209_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251209_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251209_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 01:54:12,137 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 01:54:12,144 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1qwuz_yn 2026-04-12 01:54:12,171 Soop found: SOOP 2026-04-12 01:54:12,273 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/09/CAL/solo_CAL_stix-cal-energy_20251209T062205-20251210T062204_V02.fits 2026-04-12 01:54:12,440 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_92v19b1q 2026-04-12 01:54:12,440 Read config from in: /tmp/ecc_context_ecc_cfg_1_92v19b1q/post_ecc.ini 2026-04-12 01:54:13,688 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_92v19b1q/solo_L1_stix-cal-energy_20251229_V03U_ecc_in.fits 2026-04-12 02:03:59,500 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251229_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251229_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251229_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251229_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 02:04:09,106 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 02:04:09,118 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_92v19b1q 2026-04-12 02:04:09,160 Soop found: SOOP 2026-04-12 02:04:09,272 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/29/CAL/solo_CAL_stix-cal-energy_20251229T002300-20251230T011525_V02.fits 2026-04-12 02:04:09,461 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nc0rlw0i 2026-04-12 02:04:09,461 Read config from in: /tmp/ecc_context_ecc_cfg_1_nc0rlw0i/post_ecc.ini 2026-04-12 02:04:10,765 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nc0rlw0i/solo_L1_stix-cal-energy_20251202_V03U_ecc_in.fits 2026-04-12 02:13:46,171 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251202_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251202_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251202_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251202_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 02:13:52,521 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 02:13:52,528 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_nc0rlw0i 2026-04-12 02:13:52,555 Soop found: SOOP 2026-04-12 02:13:52,648 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/02/CAL/solo_CAL_stix-cal-energy_20251202T032309-20251203T033156_V02.fits 2026-04-12 02:13:52,815 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o0omj8xn 2026-04-12 02:13:52,815 Read config from in: /tmp/ecc_context_ecc_cfg_1_o0omj8xn/post_ecc.ini 2026-04-12 02:13:54,062 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o0omj8xn/solo_L1_stix-cal-energy_20251213_V03U_ecc_in.fits 2026-04-12 02:23:15,785 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251213_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251213_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251213_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251213_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 02:23:22,080 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 02:23:22,087 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o0omj8xn 2026-04-12 02:23:22,112 Soop found: SOOP 2026-04-12 02:23:22,112 Soop found: SOOP 2026-04-12 02:23:22,206 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/13/CAL/solo_CAL_stix-cal-energy_20251213T062228-20251214T062229_V02.fits 2026-04-12 02:23:22,371 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9lrab2lm 2026-04-12 02:23:22,371 Read config from in: /tmp/ecc_context_ecc_cfg_1_9lrab2lm/post_ecc.ini 2026-04-12 02:23:23,631 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9lrab2lm/solo_L1_stix-cal-energy_20251215_V03U_ecc_in.fits 2026-04-12 02:32:39,854 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251215_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251215_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251215_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251215_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 02:32:46,179 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 02:32:46,186 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_9lrab2lm 2026-04-12 02:32:46,214 Soop found: SOOP 2026-04-12 02:32:46,316 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/15/CAL/solo_CAL_stix-cal-energy_20251215T030502-20251216T030501_V02.fits 2026-04-12 02:32:46,478 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7ff7pcqb 2026-04-12 02:32:46,479 Read config from in: /tmp/ecc_context_ecc_cfg_1_7ff7pcqb/post_ecc.ini 2026-04-12 02:32:47,724 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7ff7pcqb/solo_L1_stix-cal-energy_20251204_V03U_ecc_in.fits 2026-04-12 02:42:17,082 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251204_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251204_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251204_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251204_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 02:42:23,491 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 02:42:23,500 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7ff7pcqb 2026-04-12 02:42:23,546 Soop found: SOOP 2026-04-12 02:42:23,649 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/12/04/CAL/solo_CAL_stix-cal-energy_20251204T050932-20251205T050932_V02.fits 2026-04-12 02:42:23,820 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z6bun26b 2026-04-12 02:42:23,820 Read config from in: /tmp/ecc_context_ecc_cfg_1_z6bun26b/post_ecc.ini 2026-04-12 02:42:25,072 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z6bun26b/solo_L1_stix-cal-energy_20251130_V03U_ecc_in.fits 2026-04-12 02:51:42,752 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251130_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251130_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251130_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 02:51:49,136 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 02:51:49,143 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z6bun26b 2026-04-12 02:51:49,172 Soop found: SOOP 2026-04-12 02:51:49,172 Soop found: SOOP 2026-04-12 02:51:49,172 Soop found: SOOP 2026-04-12 02:51:49,274 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/30/CAL/solo_CAL_stix-cal-energy_20251130T061204-20251201T030002_V02.fits 2026-04-12 02:51:49,445 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6do0xtot 2026-04-12 02:51:49,446 Read config from in: /tmp/ecc_context_ecc_cfg_1_6do0xtot/post_ecc.ini 2026-04-12 02:51:52,330 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6do0xtot/solo_L1_stix-cal-energy_20251110_V03U_ecc_in.fits 2026-04-12 03:01:26,844 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251110_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251110_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251110_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 03:01:33,182 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 03:01:33,189 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6do0xtot 2026-04-12 03:01:33,216 Soop found: SOOP 2026-04-12 03:01:33,318 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/10/CAL/solo_CAL_stix-cal-energy_20251110T011620-20251111T012739_V02.fits 2026-04-12 03:01:33,493 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7qim5_8z 2026-04-12 03:01:33,494 Read config from in: /tmp/ecc_context_ecc_cfg_1_7qim5_8z/post_ecc.ini 2026-04-12 03:01:34,732 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7qim5_8z/solo_L1_stix-cal-energy_20251101_V03U_ecc_in.fits 2026-04-12 03:11:09,868 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251101_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251101_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251101_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 03:11:16,163 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 03:11:16,171 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7qim5_8z 2026-04-12 03:11:16,198 Soop found: SOOP 2026-04-12 03:11:16,198 Soop found: SOOP 2026-04-12 03:11:16,198 Soop found: SOOP 2026-04-12 03:11:16,297 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/01/CAL/solo_CAL_stix-cal-energy_20251101T002537-20251102T002536_V02.fits 2026-04-12 03:11:16,471 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6cqpmsvb 2026-04-12 03:11:16,471 Read config from in: /tmp/ecc_context_ecc_cfg_1_6cqpmsvb/post_ecc.ini 2026-04-12 03:11:17,768 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6cqpmsvb/solo_L1_stix-cal-energy_20251124_V03U_ecc_in.fits 2026-04-12 03:20:47,533 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251124_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251124_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 03:20:53,947 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 03:20:53,954 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6cqpmsvb 2026-04-12 03:20:53,989 Soop found: SOOP 2026-04-12 03:20:53,990 Soop found: SOOP 2026-04-12 03:20:54,095 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/24/CAL/solo_CAL_stix-cal-energy_20251124T061123-20251125T061124_V02.fits 2026-04-12 03:20:54,277 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jr4pwnuv 2026-04-12 03:20:54,277 Read config from in: /tmp/ecc_context_ecc_cfg_1_jr4pwnuv/post_ecc.ini 2026-04-12 03:20:55,622 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jr4pwnuv/solo_L1_stix-cal-energy_20251108_V03U_ecc_in.fits 2026-04-12 03:30:11,633 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251108_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251108_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251108_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 03:30:18,351 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 03:30:18,366 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jr4pwnuv 2026-04-12 03:30:18,475 Soop found: SOOP 2026-04-12 03:30:18,614 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/08/CAL/solo_CAL_stix-cal-energy_20251108T010945-20251109T010945_V02.fits 2026-04-12 03:30:18,840 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yaqi8wqa 2026-04-12 03:30:18,841 Read config from in: /tmp/ecc_context_ecc_cfg_1_yaqi8wqa/post_ecc.ini 2026-04-12 03:30:20,091 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yaqi8wqa/solo_L1_stix-cal-energy_20251105_V03U_ecc_in.fits 2026-04-12 03:39:37,648 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251105_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251105_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251105_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 03:39:44,141 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 03:39:44,148 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yaqi8wqa 2026-04-12 03:39:44,180 Soop found: SOOP 2026-04-12 03:39:44,278 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/05/CAL/solo_CAL_stix-cal-energy_20251105T005448-20251106T005545_V02.fits 2026-04-12 03:39:44,468 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_df8s6857 2026-04-12 03:39:44,468 Read config from in: /tmp/ecc_context_ecc_cfg_1_df8s6857/post_ecc.ini 2026-04-12 03:39:45,716 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_df8s6857/solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits 2026-04-12 03:49:10,373 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 03:49:18,375 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 03:49:18,382 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_df8s6857 2026-04-12 03:49:18,414 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tao32w_0 2026-04-12 03:49:18,415 Read config from in: /tmp/ecc_context_ecc_cfg_1_tao32w_0/post_ecc.ini 2026-04-12 03:49:19,661 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tao32w_0/solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits 2026-04-12 03:58:23,447 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 03:58:29,760 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 03:58:29,767 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tao32w_0 2026-04-12 03:58:29,798 Soop found: SOOP 2026-04-12 03:58:29,899 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/14/CAL/solo_CAL_stix-cal-energy_20251113T131900-20251114T131900_V02.fits 2026-04-12 03:58:29,936 Soop found: SOOP 2026-04-12 03:58:30,027 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/14/CAL/solo_CAL_stix-cal-energy_20251114T131906-20251115T000002_V02.fits 2026-04-12 03:58:30,200 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uzfdtwut 2026-04-12 03:58:30,201 Read config from in: /tmp/ecc_context_ecc_cfg_1_uzfdtwut/post_ecc.ini 2026-04-12 03:58:31,445 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uzfdtwut/solo_L1_stix-cal-energy_20251107_V03U_ecc_in.fits 2026-04-12 04:08:11,036 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251107_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251107_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251107_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 04:08:17,425 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 04:08:17,434 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uzfdtwut 2026-04-12 04:08:17,468 Soop found: SOOP 2026-04-12 04:08:17,570 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/07/CAL/solo_CAL_stix-cal-energy_20251107T010652-20251108T010849_V02.fits 2026-04-12 04:08:17,745 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c6bndlro 2026-04-12 04:08:17,745 Read config from in: /tmp/ecc_context_ecc_cfg_1_c6bndlro/post_ecc.ini 2026-04-12 04:08:18,983 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c6bndlro/solo_L1_stix-cal-energy_20251120_V03U_ecc_in.fits 2026-04-12 04:17:51,743 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251120_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251120_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 04:17:58,064 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 04:17:58,071 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c6bndlro 2026-04-12 04:17:58,099 Soop found: SOOP 2026-04-12 04:17:58,099 Soop found: SOOP 2026-04-12 04:17:58,203 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/20/CAL/solo_CAL_stix-cal-energy_20251120T035117-20251121T035117_V02.fits 2026-04-12 04:17:58,370 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_grbfutl1 2026-04-12 04:17:58,371 Read config from in: /tmp/ecc_context_ecc_cfg_1_grbfutl1/post_ecc.ini 2026-04-12 04:17:59,691 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_grbfutl1/solo_L1_stix-cal-energy_20251106_V03U_ecc_in.fits 2026-04-12 04:27:28,621 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251106_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251106_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251106_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251106_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 04:27:35,182 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 04:27:35,197 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_grbfutl1 2026-04-12 04:27:35,259 Soop found: SOOP 2026-04-12 04:27:35,372 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/06/CAL/solo_CAL_stix-cal-energy_20251106T010645-20251107T010646_V02.fits 2026-04-12 04:27:35,552 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bos55slr 2026-04-12 04:27:35,554 Read config from in: /tmp/ecc_context_ecc_cfg_1_bos55slr/post_ecc.ini 2026-04-12 04:27:36,815 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bos55slr/solo_L1_stix-cal-energy_20251103_V03U_ecc_in.fits 2026-04-12 04:36:44,862 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251103_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251103_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251103_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251103_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 04:36:51,243 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 04:36:51,250 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bos55slr 2026-04-12 04:36:51,281 Soop found: SOOP 2026-04-12 04:36:51,380 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/03/CAL/solo_CAL_stix-cal-energy_20251103T003231-20251104T003231_V02.fits 2026-04-12 04:36:51,562 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bex2y33a 2026-04-12 04:36:51,562 Read config from in: /tmp/ecc_context_ecc_cfg_1_bex2y33a/post_ecc.ini 2026-04-12 04:36:52,817 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bex2y33a/solo_L1_stix-cal-energy_20251117_V03U_ecc_in.fits 2026-04-12 04:46:13,063 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251117_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251117_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251117_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251117_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 04:46:21,072 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 04:46:21,079 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bex2y33a 2026-04-12 04:46:21,105 Soop found: SOOP 2026-04-12 04:46:21,203 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/17/CAL/solo_CAL_stix-cal-energy_20251117T031110-20251118T031115_V02.fits 2026-04-12 04:46:21,370 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_np094tww 2026-04-12 04:46:21,370 Read config from in: /tmp/ecc_context_ecc_cfg_1_np094tww/post_ecc.ini 2026-04-12 04:46:22,598 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_np094tww/solo_L1_stix-cal-energy_20251118_V03U_ecc_in.fits 2026-04-12 04:55:41,308 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251118_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251118_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251118_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251118_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 04:55:48,263 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 04:55:48,279 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_np094tww 2026-04-12 04:55:48,407 Soop found: SOOP 2026-04-12 04:55:48,556 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/18/CAL/solo_CAL_stix-cal-energy_20251118T031124-20251119T031125_V02.fits 2026-04-12 04:55:48,771 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hvynm7rk 2026-04-12 04:55:48,772 Read config from in: /tmp/ecc_context_ecc_cfg_1_hvynm7rk/post_ecc.ini 2026-04-12 04:55:50,048 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hvynm7rk/solo_L1_stix-cal-energy_20251123_V03U_ecc_in.fits 2026-04-12 05:05:23,590 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251123_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251123_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 05:05:29,981 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 05:05:29,989 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_hvynm7rk 2026-04-12 05:05:30,019 Soop found: SOOP 2026-04-12 05:05:30,019 Soop found: SOOP 2026-04-12 05:05:30,019 Soop found: SOOP 2026-04-12 05:05:30,119 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/23/CAL/solo_CAL_stix-cal-energy_20251123T044443-20251124T044834_V02.fits 2026-04-12 05:05:30,290 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2f66tqfo 2026-04-12 05:05:30,290 Read config from in: /tmp/ecc_context_ecc_cfg_1_2f66tqfo/post_ecc.ini 2026-04-12 05:05:31,563 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2f66tqfo/solo_L1_stix-cal-energy_20251116_V03U_ecc_in.fits 2026-04-12 05:14:47,143 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251116_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251116_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 05:14:53,414 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 05:14:53,421 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2f66tqfo 2026-04-12 05:14:53,447 Soop found: SOOP 2026-04-12 05:14:53,447 Soop found: SOOP 2026-04-12 05:14:53,543 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/16/CAL/solo_CAL_stix-cal-energy_20251116T000507-20251117T020522_V02.fits 2026-04-12 05:14:53,707 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i_7q2b7n 2026-04-12 05:14:53,708 Read config from in: /tmp/ecc_context_ecc_cfg_1_i_7q2b7n/post_ecc.ini 2026-04-12 05:14:54,953 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i_7q2b7n/solo_L1_stix-cal-energy_20251121_V03U_ecc_in.fits 2026-04-12 05:24:16,262 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251121_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251121_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 05:24:22,605 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 05:24:22,613 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i_7q2b7n 2026-04-12 05:24:22,646 Soop found: SOOP 2026-04-12 05:24:22,646 Soop found: SOOP 2026-04-12 05:24:22,749 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/21/CAL/solo_CAL_stix-cal-energy_20251121T035123-20251122T044431_V02.fits 2026-04-12 05:24:22,929 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y8tstnz7 2026-04-12 05:24:22,930 Read config from in: /tmp/ecc_context_ecc_cfg_1_y8tstnz7/post_ecc.ini 2026-04-12 05:24:24,168 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y8tstnz7/solo_L1_stix-cal-energy_20251127_V03U_ecc_in.fits 2026-04-12 05:33:39,389 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251127_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251127_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251127_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251127_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 05:33:45,740 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 05:33:45,747 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y8tstnz7 2026-04-12 05:33:45,777 Soop found: SOOP 2026-04-12 05:33:45,777 Soop found: SOOP 2026-04-12 05:33:45,878 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/27/CAL/solo_CAL_stix-cal-energy_20251127T061142-20251128T061142_V02.fits 2026-04-12 05:33:46,053 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_87qvzy5i 2026-04-12 05:33:46,054 Read config from in: /tmp/ecc_context_ecc_cfg_1_87qvzy5i/post_ecc.ini 2026-04-12 05:33:49,168 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_87qvzy5i/solo_L1_stix-cal-energy_20251111_V03U_ecc_in.fits 2026-04-12 05:47:37,009 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251111_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251111_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251111_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251111_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 05:47:44,730 Run ecc post fit: replaced [91.1 %] gain offset pairs with 'better fits' 2026-04-12 05:47:44,733 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,733 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,733 ECC result Gain_Prime 0.0 for DET 4 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,733 ECC result Gain_Prime 0.0 for DET 5 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,733 ECC result Gain_Prime 0.0 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,733 ECC result Gain_Prime 0.0 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,733 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 10 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 12 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 14 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 14 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 17 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,734 ECC result Gain_Prime 0.0 for DET 17 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 18 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 19 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 20 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 20 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 20 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 20 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 24 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,735 ECC result Gain_Prime 0.0 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,736 ECC result Gain_Prime 0.0 for DET 25 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,736 ECC result Gain_Prime 0.0 for DET 26 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,736 ECC result Gain_Prime 0.0 for DET 28 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,736 ECC result Gain_Prime 0.0 for DET 29 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,736 ECC result Gain_Prime 0.0 for DET 30 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,736 ECC result Gain_Prime 0.0 for DET 31 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,736 ECC result Gain_Prime 0.0 for DET 31 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,736 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 05:47:44,741 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_87qvzy5i 2026-04-12 05:47:44,771 Soop found: SOOP 2026-04-12 05:47:44,868 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/11/CAL/solo_CAL_stix-cal-energy_20251111T021644-20251112T125928_V02.fits 2026-04-12 05:47:45,040 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y3bqq68d 2026-04-12 05:47:45,041 Read config from in: /tmp/ecc_context_ecc_cfg_1_y3bqq68d/post_ecc.ini 2026-04-12 05:47:46,274 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y3bqq68d/solo_L1_stix-cal-energy_20251126_V03U_ecc_in.fits 2026-04-12 05:57:03,822 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251126_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251126_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251126_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251126_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 05:57:10,257 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 05:57:10,269 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y3bqq68d 2026-04-12 05:57:10,326 Soop found: SOOP 2026-04-12 05:57:10,326 Soop found: SOOP 2026-04-12 05:57:10,430 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/26/CAL/solo_CAL_stix-cal-energy_20251126T061136-20251127T061136_V02.fits 2026-04-12 05:57:10,616 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ze419887 2026-04-12 05:57:10,617 Read config from in: /tmp/ecc_context_ecc_cfg_1_ze419887/post_ecc.ini 2026-04-12 05:57:11,948 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ze419887/solo_L1_stix-cal-energy_20251119_V03U_ecc_in.fits 2026-04-12 06:06:30,489 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251119_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251119_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251119_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251119_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 06:06:36,708 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 06:06:36,717 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ze419887 2026-04-12 06:06:36,748 Soop found: SOOP 2026-04-12 06:06:36,748 Soop found: SOOP 2026-04-12 06:06:36,868 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/19/CAL/solo_CAL_stix-cal-energy_20251119T031131-20251120T032036_V02.fits 2026-04-12 06:06:37,070 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_k7i_54eb 2026-04-12 06:06:37,070 Read config from in: /tmp/ecc_context_ecc_cfg_1_k7i_54eb/post_ecc.ini 2026-04-12 06:06:38,339 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_k7i_54eb/solo_L1_stix-cal-energy_20251122_V03U_ecc_in.fits 2026-04-12 06:16:19,869 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251122_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251122_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 06:16:26,323 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 06:16:26,331 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_k7i_54eb 2026-04-12 06:16:26,360 Soop found: SOOP 2026-04-12 06:16:26,361 Soop found: SOOP 2026-04-12 06:16:26,458 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/22/CAL/solo_CAL_stix-cal-energy_20251122T044436-20251123T044436_V02.fits 2026-04-12 06:16:26,627 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_56f6cr9p 2026-04-12 06:16:26,628 Read config from in: /tmp/ecc_context_ecc_cfg_1_56f6cr9p/post_ecc.ini 2026-04-12 06:16:27,890 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_56f6cr9p/solo_L1_stix-cal-energy_20251125_V03U_ecc_in.fits 2026-04-12 06:25:51,833 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251125_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251125_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 06:25:58,172 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 06:25:58,178 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_56f6cr9p 2026-04-12 06:25:58,208 Soop found: SOOP 2026-04-12 06:25:58,208 Soop found: SOOP 2026-04-12 06:25:58,304 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/25/CAL/solo_CAL_stix-cal-energy_20251125T061131-20251126T061130_V02.fits 2026-04-12 06:25:58,474 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ojrpp_9c 2026-04-12 06:25:58,474 Read config from in: /tmp/ecc_context_ecc_cfg_1_ojrpp_9c/post_ecc.ini 2026-04-12 06:25:59,726 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ojrpp_9c/solo_L1_stix-cal-energy_20251128_V03U_ecc_in.fits 2026-04-12 06:35:15,672 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251128_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251128_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251128_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251128_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 06:35:22,796 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 06:35:22,804 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ojrpp_9c 2026-04-12 06:35:22,838 Soop found: SOOP 2026-04-12 06:35:22,838 Soop found: SOOP 2026-04-12 06:35:24,583 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/28/CAL/solo_CAL_stix-cal-energy_20251128T061148-20251129T061148_V02.fits 2026-04-12 06:35:24,752 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i6z4i8lk 2026-04-12 06:35:24,752 Read config from in: /tmp/ecc_context_ecc_cfg_1_i6z4i8lk/post_ecc.ini 2026-04-12 06:35:26,003 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i6z4i8lk/solo_L1_stix-cal-energy_20251109_V03U_ecc_in.fits 2026-04-12 06:44:38,888 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251109_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251109_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251109_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251109_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 06:44:45,296 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 06:44:45,303 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i6z4i8lk 2026-04-12 06:44:45,331 Soop found: SOOP 2026-04-12 06:44:45,433 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/09/CAL/solo_CAL_stix-cal-energy_20251109T010951-20251110T011614_V02.fits 2026-04-12 06:44:45,599 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x3uf67i1 2026-04-12 06:44:45,600 Read config from in: /tmp/ecc_context_ecc_cfg_1_x3uf67i1/post_ecc.ini 2026-04-12 06:44:46,829 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x3uf67i1/solo_L1_stix-cal-energy_20251129_V03U_ecc_in.fits 2026-04-12 06:54:09,266 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251129_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251129_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251129_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251129_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 06:54:15,573 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 06:54:15,580 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x3uf67i1 2026-04-12 06:54:15,608 Soop found: SOOP 2026-04-12 06:54:15,608 Soop found: SOOP 2026-04-12 06:54:15,705 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/29/CAL/solo_CAL_stix-cal-energy_20251129T061154-20251130T061154_V02.fits 2026-04-12 06:54:15,874 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r47gsod5 2026-04-12 06:54:15,875 Read config from in: /tmp/ecc_context_ecc_cfg_1_r47gsod5/post_ecc.ini 2026-04-12 06:54:17,126 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r47gsod5/solo_L1_stix-cal-energy_20251102_V03U_ecc_in.fits 2026-04-12 07:03:41,799 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251102_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251102_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251102_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251102_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 07:03:48,881 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 07:03:48,889 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r47gsod5 2026-04-12 07:03:48,924 Soop found: SOOP 2026-04-12 07:03:49,033 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/02/CAL/solo_CAL_stix-cal-energy_20251102T002543-20251103T002834_V02.fits 2026-04-12 07:03:49,219 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__2m22hz9 2026-04-12 07:03:49,220 Read config from in: /tmp/ecc_context_ecc_cfg_1__2m22hz9/post_ecc.ini 2026-04-12 07:03:50,479 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__2m22hz9/solo_L1_stix-cal-energy_20251113_V03U_ecc_in.fits 2026-04-12 07:14:02,535 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251113_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251113_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251113_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251113_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 07:14:09,213 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 07:14:09,216 ECC result Gain_Prime 0.0 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 07:14:09,221 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__2m22hz9 2026-04-12 07:14:09,252 Soop found: SOOP 2026-04-12 07:14:09,354 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/13/CAL/solo_CAL_stix-cal-energy_20251112T131854-20251113T131854_V02.fits 2026-04-12 07:14:09,541 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jnl6xk8o 2026-04-12 07:14:09,542 Read config from in: /tmp/ecc_context_ecc_cfg_1_jnl6xk8o/post_ecc.ini 2026-04-12 07:14:10,799 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jnl6xk8o/solo_L1_stix-cal-energy_20251115_V03U_ecc_in.fits 2026-04-12 07:23:31,475 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251115_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251115_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 07:23:37,784 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 07:23:37,792 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jnl6xk8o 2026-04-12 07:23:37,824 Soop found: SOOP 2026-04-12 07:23:37,928 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/15/CAL/solo_CAL_stix-cal-energy_20251115T000501-20251116T000501_V02.fits 2026-04-12 07:23:38,104 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_309sopct 2026-04-12 07:23:38,105 Read config from in: /tmp/ecc_context_ecc_cfg_1_309sopct/post_ecc.ini 2026-04-12 07:23:39,349 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_309sopct/solo_L1_stix-cal-energy_20251104_V03U_ecc_in.fits 2026-04-12 07:33:00,650 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20251104_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20251104_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20251104_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20251104_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 07:33:08,693 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 07:33:08,701 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_309sopct 2026-04-12 07:33:08,728 Soop found: SOOP 2026-04-12 07:33:08,824 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/11/04/CAL/solo_CAL_stix-cal-energy_20251104T003240-20251105T003657_V02.fits 2026-04-12 07:33:08,987 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6mfbt3ic 2026-04-12 07:33:08,988 Read config from in: /tmp/ecc_context_ecc_cfg_1_6mfbt3ic/post_ecc.ini 2026-04-12 07:33:10,263 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6mfbt3ic/solo_L1_stix-cal-energy_20250930_V03U_ecc_in.fits 2026-04-12 07:43:39,233 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250930_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250930_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250930_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250930_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 07:43:45,487 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 07:43:45,494 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_6mfbt3ic 2026-04-12 07:43:45,521 Soop found: SOOP 2026-04-12 07:43:45,521 Soop found: SOOP 2026-04-12 07:43:45,521 Soop found: SOOP 2026-04-12 07:43:45,625 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/30/CAL/solo_CAL_stix-cal-energy_20250930T010730-20251001T010731_V02.fits 2026-04-12 07:43:45,797 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u347obpi 2026-04-12 07:43:45,798 Read config from in: /tmp/ecc_context_ecc_cfg_1_u347obpi/post_ecc.ini 2026-04-12 07:43:47,040 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u347obpi/solo_L1_stix-cal-energy_20250910_V03U_ecc_in.fits 2026-04-12 07:53:12,991 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250910_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250910_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250910_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250910_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 07:53:19,645 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 07:53:19,657 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u347obpi 2026-04-12 07:53:19,691 Soop found: SOOP 2026-04-12 07:53:19,806 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/10/CAL/solo_CAL_stix-cal-energy_20250910T103751-20250911T000002_V02.fits 2026-04-12 07:53:20,027 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_95jl6knb 2026-04-12 07:53:20,027 Read config from in: /tmp/ecc_context_ecc_cfg_1_95jl6knb/post_ecc.ini 2026-04-12 07:53:21,288 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_95jl6knb/solo_L1_stix-cal-energy_20250901_V03U_ecc_in.fits 2026-04-12 08:03:01,487 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250901_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250901_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250901_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250901_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 08:03:07,835 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 08:03:07,841 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_95jl6knb 2026-04-12 08:03:07,868 Soop found: SOOP 2026-04-12 08:03:07,965 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/01/CAL/solo_CAL_stix-cal-energy_20250901T024259-20250902T024258_V02.fits 2026-04-12 08:03:08,127 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vm35qw1g 2026-04-12 08:03:08,128 Read config from in: /tmp/ecc_context_ecc_cfg_1_vm35qw1g/post_ecc.ini 2026-04-12 08:03:09,381 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vm35qw1g/solo_L1_stix-cal-energy_20250924_V03U_ecc_in.fits 2026-04-12 08:12:40,128 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250924_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250924_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250924_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250924_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 08:12:46,894 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 08:12:46,908 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vm35qw1g 2026-04-12 08:12:46,981 Soop found: SOOP 2026-04-12 08:12:46,981 Soop found: SOOP 2026-04-12 08:12:46,981 Soop found: SOOP 2026-04-12 08:12:47,099 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/24/CAL/solo_CAL_stix-cal-energy_20250924T011547-20250925T011548_V02.fits 2026-04-12 08:12:47,299 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_122ag5kn 2026-04-12 08:12:47,300 Read config from in: /tmp/ecc_context_ecc_cfg_1_122ag5kn/post_ecc.ini 2026-04-12 08:12:48,555 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_122ag5kn/solo_L1_stix-cal-energy_20250908_V03U_ecc_in.fits 2026-04-12 08:21:58,922 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250908_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250908_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250908_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250908_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 08:22:06,611 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 08:22:06,618 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_122ag5kn 2026-04-12 08:22:06,644 Soop found: SOOP 2026-04-12 08:22:06,644 Soop found: SOOP 2026-04-12 08:22:06,644 Soop found: SOOP 2026-04-12 08:22:06,740 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/08/CAL/solo_CAL_stix-cal-energy_20250908T103738-20250909T103738_V02.fits 2026-04-12 08:22:06,901 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_pwsqeahn 2026-04-12 08:22:06,901 Read config from in: /tmp/ecc_context_ecc_cfg_1_pwsqeahn/post_ecc.ini 2026-04-12 08:22:08,126 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_pwsqeahn/solo_L1_stix-cal-energy_20250905_V03U_ecc_in.fits 2026-04-12 08:31:49,279 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250905_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250905_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250905_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250905_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 08:31:55,546 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 08:31:55,553 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_pwsqeahn 2026-04-12 08:31:55,580 Soop found: SOOP 2026-04-12 08:31:55,580 Soop found: SOOP 2026-04-12 08:31:55,580 Soop found: SOOP 2026-04-12 08:31:55,680 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/05/CAL/solo_CAL_stix-cal-energy_20250905T054046-20250906T054046_V02.fits 2026-04-12 08:31:55,847 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__zi9go9y 2026-04-12 08:31:55,847 Read config from in: /tmp/ecc_context_ecc_cfg_1__zi9go9y/post_ecc.ini 2026-04-12 08:31:57,075 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__zi9go9y/solo_L1_stix-cal-energy_20250914_V03U_ecc_in.fits 2026-04-12 08:42:14,432 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250914_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250914_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250914_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250914_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 08:42:20,801 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 08:42:20,809 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__zi9go9y 2026-04-12 08:42:20,836 Soop found: SOOP 2026-04-12 08:42:20,934 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/14/CAL/solo_CAL_stix-cal-energy_20250914T005615-20250915T005615_V02.fits 2026-04-12 08:42:21,102 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_acpncwez 2026-04-12 08:42:21,103 Read config from in: /tmp/ecc_context_ecc_cfg_1_acpncwez/post_ecc.ini 2026-04-12 08:42:22,352 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_acpncwez/solo_L1_stix-cal-energy_20250907_V03U_ecc_in.fits 2026-04-12 08:51:39,598 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250907_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250907_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250907_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250907_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 08:51:45,868 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 08:51:45,876 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_acpncwez 2026-04-12 08:51:45,907 Soop found: SOOP 2026-04-12 08:51:45,907 Soop found: SOOP 2026-04-12 08:51:45,907 Soop found: SOOP 2026-04-12 08:51:45,907 Soop found: SOOP 2026-04-12 08:51:46,009 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/07/CAL/solo_CAL_stix-cal-energy_20250907T054059-20250908T103728_V02.fits 2026-04-12 08:51:46,196 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cvcpzf9i 2026-04-12 08:51:46,197 Read config from in: /tmp/ecc_context_ecc_cfg_1_cvcpzf9i/post_ecc.ini 2026-04-12 08:51:47,442 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cvcpzf9i/solo_L1_stix-cal-energy_20250920_V03U_ecc_in.fits 2026-04-12 09:01:59,593 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250920_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250920_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250920_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250920_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 09:02:06,933 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 09:02:06,942 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cvcpzf9i 2026-04-12 09:02:06,984 Soop found: SOOP 2026-04-12 09:02:06,985 Soop found: SOOP 2026-04-12 09:02:07,085 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/20/CAL/solo_CAL_stix-cal-energy_20250920T000725-20250921T000725_V02.fits 2026-04-12 09:02:07,257 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1qsdd_6a 2026-04-12 09:02:07,258 Read config from in: /tmp/ecc_context_ecc_cfg_1_1qsdd_6a/post_ecc.ini 2026-04-12 09:02:08,501 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1qsdd_6a/solo_L1_stix-cal-energy_20250906_V03U_ecc_in.fits 2026-04-12 09:11:22,668 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250906_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250906_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250906_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250906_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 09:11:29,449 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 09:11:29,457 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1qsdd_6a 2026-04-12 09:11:29,487 Soop found: SOOP 2026-04-12 09:11:29,487 Soop found: SOOP 2026-04-12 09:11:29,584 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/06/CAL/solo_CAL_stix-cal-energy_20250906T054053-20250907T054053_V02.fits 2026-04-12 09:11:29,751 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b4x4g2em 2026-04-12 09:11:29,752 Read config from in: /tmp/ecc_context_ecc_cfg_1_b4x4g2em/post_ecc.ini 2026-04-12 09:11:30,996 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b4x4g2em/solo_L1_stix-cal-energy_20250903_V03U_ecc_in.fits 2026-04-12 09:21:33,162 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250903_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250903_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250903_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250903_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 09:21:41,094 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 09:21:41,101 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b4x4g2em 2026-04-12 09:21:41,127 Soop found: SOOP 2026-04-12 09:21:41,223 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/03/CAL/solo_CAL_stix-cal-energy_20250903T024311-20250904T031328_V02.fits 2026-04-12 09:21:41,389 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_aeow6__x 2026-04-12 09:21:41,390 Read config from in: /tmp/ecc_context_ecc_cfg_1_aeow6__x/post_ecc.ini 2026-04-12 09:21:42,722 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_aeow6__x/solo_L1_stix-cal-energy_20250917_V03U_ecc_in.fits 2026-04-12 09:32:04,982 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250917_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250917_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250917_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250917_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 09:32:11,320 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 09:32:11,327 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_aeow6__x 2026-04-12 09:32:11,355 Soop found: SOOP 2026-04-12 09:32:11,355 Soop found: SOOP 2026-04-12 09:32:11,456 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/17/CAL/solo_CAL_stix-cal-energy_20250917T010417-20250918T011932_V02.fits 2026-04-12 09:32:11,633 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_40l5a36h 2026-04-12 09:32:11,634 Read config from in: /tmp/ecc_context_ecc_cfg_1_40l5a36h/post_ecc.ini 2026-04-12 09:32:12,875 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_40l5a36h/solo_L1_stix-cal-energy_20250918_V03U_ecc_in.fits 2026-04-12 09:42:30,946 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250918_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250918_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250918_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250918_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 09:42:37,305 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 09:42:37,313 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_40l5a36h 2026-04-12 09:42:37,360 Soop found: SOOP 2026-04-12 09:42:37,361 Soop found: SOOP 2026-04-12 09:42:37,362 Soop found: SOOP 2026-04-12 09:42:37,467 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/18/CAL/solo_CAL_stix-cal-energy_20250918T012007-20250919T012008_V02.fits 2026-04-12 09:42:37,641 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jaie_xaf 2026-04-12 09:42:37,642 Read config from in: /tmp/ecc_context_ecc_cfg_1_jaie_xaf/post_ecc.ini 2026-04-12 09:42:38,884 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jaie_xaf/solo_L1_stix-cal-energy_20250923_V03U_ecc_in.fits 2026-04-12 09:52:10,574 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250923_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250923_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250923_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250923_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 09:52:17,063 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 09:52:17,071 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jaie_xaf 2026-04-12 09:52:17,105 Soop found: SOOP 2026-04-12 09:52:17,105 Soop found: SOOP 2026-04-12 09:52:17,106 Soop found: SOOP 2026-04-12 09:52:17,106 Soop found: SOOP 2026-04-12 09:52:17,106 Soop found: SOOP 2026-04-12 09:52:17,203 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/23/CAL/solo_CAL_stix-cal-energy_20250923T011541-20250924T011541_V02.fits 2026-04-12 09:52:17,367 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l0tx8a23 2026-04-12 09:52:17,368 Read config from in: /tmp/ecc_context_ecc_cfg_1_l0tx8a23/post_ecc.ini 2026-04-12 09:52:18,611 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l0tx8a23/solo_L1_stix-cal-energy_20250916_V03U_ecc_in.fits 2026-04-12 10:02:37,480 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250916_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250916_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250916_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250916_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 10:02:43,832 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 10:02:43,840 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l0tx8a23 2026-04-12 10:02:43,879 Soop found: SOOP 2026-04-12 10:02:43,879 Soop found: SOOP 2026-04-12 10:02:43,982 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/16/CAL/solo_CAL_stix-cal-energy_20250916T005627-20250917T005914_V02.fits 2026-04-12 10:02:44,157 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_15jost2i 2026-04-12 10:02:44,157 Read config from in: /tmp/ecc_context_ecc_cfg_1_15jost2i/post_ecc.ini 2026-04-12 10:02:45,403 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_15jost2i/solo_L1_stix-cal-energy_20250921_V03U_ecc_in.fits 2026-04-12 10:12:46,618 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250921_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250921_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250921_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250921_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 10:12:53,018 Run ecc post fit: replaced [99.5 %] gain offset pairs with 'better fits' 2026-04-12 10:12:53,025 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_15jost2i 2026-04-12 10:12:53,060 Soop found: SOOP 2026-04-12 10:12:53,060 Soop found: SOOP 2026-04-12 10:12:53,155 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/21/CAL/solo_CAL_stix-cal-energy_20250921T000731-20250922T000741_V02.fits 2026-04-12 10:12:53,322 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bhtw4suh 2026-04-12 10:12:53,323 Read config from in: /tmp/ecc_context_ecc_cfg_1_bhtw4suh/post_ecc.ini 2026-04-12 10:12:56,039 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bhtw4suh/solo_L1_stix-cal-energy_20250912_V03U_ecc_in.fits 2026-04-12 10:23:04,747 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250912_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250912_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250912_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250912_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 10:23:11,044 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 10:23:11,052 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bhtw4suh 2026-04-12 10:23:11,081 Soop found: SOOP 2026-04-12 10:23:11,081 Soop found: SOOP 2026-04-12 10:23:11,081 Soop found: SOOP 2026-04-12 10:23:11,181 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/12/CAL/solo_CAL_stix-cal-energy_20250912T000507-20250913T003501_V02.fits 2026-04-12 10:23:11,350 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mrxspcnv 2026-04-12 10:23:11,351 Read config from in: /tmp/ecc_context_ecc_cfg_1_mrxspcnv/post_ecc.ini 2026-04-12 10:23:12,588 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mrxspcnv/solo_L1_stix-cal-energy_20250927_V03U_ecc_in.fits 2026-04-12 10:32:53,769 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250927_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250927_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250927_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250927_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 10:33:00,095 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 10:33:00,103 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mrxspcnv 2026-04-12 10:33:00,129 Soop found: SOOP 2026-04-12 10:33:00,129 Soop found: SOOP 2026-04-12 10:33:00,129 Soop found: SOOP 2026-04-12 10:33:00,226 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/27/CAL/solo_CAL_stix-cal-energy_20250927T062902-20250928T062902_V02.fits 2026-04-12 10:33:00,395 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bm2syy0z 2026-04-12 10:33:00,396 Read config from in: /tmp/ecc_context_ecc_cfg_1_bm2syy0z/post_ecc.ini 2026-04-12 10:33:01,666 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bm2syy0z/solo_L1_stix-cal-energy_20250911_V03U_ecc_in.fits 2026-04-12 10:42:57,744 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250911_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250911_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250911_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250911_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 10:43:04,023 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 10:43:04,041 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bm2syy0z 2026-04-12 10:43:04,071 Soop found: SOOP 2026-04-12 10:43:04,071 Soop found: SOOP 2026-04-12 10:43:04,071 Soop found: SOOP 2026-04-12 10:43:04,172 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/11/CAL/solo_CAL_stix-cal-energy_20250911T000501-20250912T000501_V02.fits 2026-04-12 10:43:04,314 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j6m89wzs 2026-04-12 10:43:04,315 Read config from in: /tmp/ecc_context_ecc_cfg_1_j6m89wzs/post_ecc.ini 2026-04-12 10:43:05,547 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j6m89wzs/solo_L1_stix-cal-energy_20250926_V03U_ecc_in.fits 2026-04-12 10:52:34,212 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250926_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250926_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250926_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250926_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 10:52:40,656 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 10:52:40,664 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j6m89wzs 2026-04-12 10:52:40,700 Soop found: SOOP 2026-04-12 10:52:40,700 Soop found: SOOP 2026-04-12 10:52:40,700 Soop found: SOOP 2026-04-12 10:52:40,808 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/26/CAL/solo_CAL_stix-cal-energy_20250926T011603-20250927T032301_V02.fits 2026-04-12 10:52:40,984 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qyt9qr62 2026-04-12 10:52:40,985 Read config from in: /tmp/ecc_context_ecc_cfg_1_qyt9qr62/post_ecc.ini 2026-04-12 10:52:42,262 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qyt9qr62/solo_L1_stix-cal-energy_20250919_V03U_ecc_in.fits 2026-04-12 11:03:11,622 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250919_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250919_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250919_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250919_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 11:03:17,942 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 11:03:17,949 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qyt9qr62 2026-04-12 11:03:17,979 Soop found: SOOP 2026-04-12 11:03:17,980 Soop found: SOOP 2026-04-12 11:03:18,076 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/19/CAL/solo_CAL_stix-cal-energy_20250919T012015-20250920T000002_V02.fits 2026-04-12 11:03:18,224 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mj3fcp0m 2026-04-12 11:03:18,225 Read config from in: /tmp/ecc_context_ecc_cfg_1_mj3fcp0m/post_ecc.ini 2026-04-12 11:03:19,471 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mj3fcp0m/solo_L1_stix-cal-energy_20250922_V03U_ecc_in.fits 2026-04-12 11:12:58,278 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250922_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250922_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250922_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250922_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 11:13:04,586 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 11:13:04,594 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mj3fcp0m 2026-04-12 11:13:04,622 Soop found: SOOP 2026-04-12 11:13:04,623 Soop found: SOOP 2026-04-12 11:13:04,623 Soop found: SOOP 2026-04-12 11:13:04,623 Soop found: SOOP 2026-04-12 11:13:04,719 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/22/CAL/solo_CAL_stix-cal-energy_20250922T011535-20250923T011535_V02.fits 2026-04-12 11:13:06,694 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u3p_svw3 2026-04-12 11:13:06,694 Read config from in: /tmp/ecc_context_ecc_cfg_1_u3p_svw3/post_ecc.ini 2026-04-12 11:13:07,928 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u3p_svw3/solo_L1_stix-cal-energy_20250925_V03U_ecc_in.fits 2026-04-12 11:22:23,292 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250925_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250925_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250925_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250925_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 11:22:29,684 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 11:22:29,695 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u3p_svw3 2026-04-12 11:22:29,752 Soop found: SOOP 2026-04-12 11:22:29,752 Soop found: SOOP 2026-04-12 11:22:29,752 Soop found: SOOP 2026-04-12 11:22:29,857 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/25/CAL/solo_CAL_stix-cal-energy_20250925T011557-20250926T011557_V02.fits 2026-04-12 11:22:30,034 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_lht8q3vp 2026-04-12 11:22:30,034 Read config from in: /tmp/ecc_context_ecc_cfg_1_lht8q3vp/post_ecc.ini 2026-04-12 11:22:31,270 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_lht8q3vp/solo_L1_stix-cal-energy_20250928_V03U_ecc_in.fits 2026-04-12 11:32:07,255 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250928_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250928_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250928_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250928_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 11:32:13,628 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 11:32:13,631 ECC result Gain_Prime 0.0 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 11:32:13,637 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_lht8q3vp 2026-04-12 11:32:13,665 Soop found: SOOP 2026-04-12 11:32:13,665 Soop found: SOOP 2026-04-12 11:32:13,762 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/28/CAL/solo_CAL_stix-cal-energy_20250928T062908-20250929T000002_V02.fits 2026-04-12 11:32:13,924 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uu4j17c8 2026-04-12 11:32:13,925 Read config from in: /tmp/ecc_context_ecc_cfg_1_uu4j17c8/post_ecc.ini 2026-04-12 11:32:15,156 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uu4j17c8/solo_L1_stix-cal-energy_20250909_V03U_ecc_in.fits 2026-04-12 11:41:46,884 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250909_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250909_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250909_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250909_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 11:41:53,092 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 11:41:53,099 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uu4j17c8 2026-04-12 11:41:53,129 Soop found: SOOP 2026-04-12 11:41:53,230 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/09/CAL/solo_CAL_stix-cal-energy_20250909T103744-20250910T103744_V02.fits 2026-04-12 11:41:53,401 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1bzwwc0b 2026-04-12 11:41:53,402 Read config from in: /tmp/ecc_context_ecc_cfg_1_1bzwwc0b/post_ecc.ini 2026-04-12 11:41:54,645 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1bzwwc0b/solo_L1_stix-cal-energy_20250929_V03U_ecc_in.fits 2026-04-12 11:51:47,561 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250929_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250929_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250929_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250929_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 11:51:53,801 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 11:51:53,808 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1bzwwc0b 2026-04-12 11:51:53,835 Soop found: SOOP 2026-04-12 11:51:53,836 Soop found: SOOP 2026-04-12 11:51:53,931 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/29/CAL/solo_CAL_stix-cal-energy_20250929T002300-20250930T010721_V02.fits 2026-04-12 11:51:54,102 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mtigtybo 2026-04-12 11:51:54,102 Read config from in: /tmp/ecc_context_ecc_cfg_1_mtigtybo/post_ecc.ini 2026-04-12 11:51:55,336 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mtigtybo/solo_L1_stix-cal-energy_20250902_V03U_ecc_in.fits 2026-04-12 12:01:42,806 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250902_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250902_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250902_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250902_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 12:01:49,262 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 12:01:49,269 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mtigtybo 2026-04-12 12:01:49,300 Soop found: SOOP 2026-04-12 12:01:49,400 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/02/CAL/solo_CAL_stix-cal-energy_20250902T024304-20250903T024304_V02.fits 2026-04-12 12:01:49,591 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__ckda68e 2026-04-12 12:01:49,592 Read config from in: /tmp/ecc_context_ecc_cfg_1__ckda68e/post_ecc.ini 2026-04-12 12:01:50,872 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__ckda68e/solo_L1_stix-cal-energy_20250913_V03U_ecc_in.fits 2026-04-12 12:17:19,770 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250913_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250913_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250913_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250913_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 12:17:27,821 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 12:17:27,828 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__ckda68e 2026-04-12 12:17:27,853 Soop found: SOOP 2026-04-12 12:17:27,853 Soop found: SOOP 2026-04-12 12:17:27,853 Soop found: SOOP 2026-04-12 12:17:27,853 Soop found: SOOP 2026-04-12 12:17:27,952 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/13/CAL/solo_CAL_stix-cal-energy_20250913T005609-20250914T005609_V02.fits 2026-04-12 12:17:28,131 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bm_l5rej 2026-04-12 12:17:28,131 Read config from in: /tmp/ecc_context_ecc_cfg_1_bm_l5rej/post_ecc.ini 2026-04-12 12:17:29,379 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bm_l5rej/solo_L1_stix-cal-energy_20250915_V03U_ecc_in.fits 2026-04-12 12:27:42,232 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250915_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250915_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250915_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250915_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 12:27:48,639 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 12:27:48,647 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bm_l5rej 2026-04-12 12:27:48,711 Soop found: SOOP 2026-04-12 12:27:48,712 Soop found: SOOP 2026-04-12 12:27:48,712 Soop found: SOOP 2026-04-12 12:27:48,830 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/15/CAL/solo_CAL_stix-cal-energy_20250915T005621-20250916T005621_V02.fits 2026-04-12 12:27:49,045 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dkik30py 2026-04-12 12:27:49,047 Read config from in: /tmp/ecc_context_ecc_cfg_1_dkik30py/post_ecc.ini 2026-04-12 12:27:50,315 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dkik30py/solo_L1_stix-cal-energy_20250904_V03U_ecc_in.fits 2026-04-12 12:37:33,919 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250904_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250904_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250904_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250904_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 12:37:41,008 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 12:37:41,018 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_dkik30py 2026-04-12 12:37:41,054 Soop found: SOOP 2026-04-12 12:37:41,054 Soop found: SOOP 2026-04-12 12:37:41,162 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/09/04/CAL/solo_CAL_stix-cal-energy_20250904T054040-20250905T054040_V02.fits 2026-04-12 12:37:41,340 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sop2879c 2026-04-12 12:37:41,341 Read config from in: /tmp/ecc_context_ecc_cfg_1_sop2879c/post_ecc.ini 2026-04-12 12:37:42,622 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sop2879c/solo_L1_stix-cal-energy_20250210_V03U_ecc_in.fits 2026-04-12 12:47:40,736 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250210_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250210_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250210_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250210_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 12:47:47,141 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 12:47:47,153 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sop2879c 2026-04-12 12:47:47,210 Soop found: SOOP 2026-04-12 12:47:47,348 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/10/CAL/solo_CAL_stix-cal-energy_20250210T015953-20250211T015953_V02.fits 2026-04-12 12:47:47,529 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ui3ku3_s 2026-04-12 12:47:47,530 Read config from in: /tmp/ecc_context_ecc_cfg_1_ui3ku3_s/post_ecc.ini 2026-04-12 12:47:48,797 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ui3ku3_s/solo_L1_stix-cal-energy_20250201_V03U_ecc_in.fits 2026-04-12 12:57:43,526 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250201_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250201_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250201_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250201_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 12:57:49,813 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 12:57:49,821 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ui3ku3_s 2026-04-12 12:57:49,848 Soop found: SOOP 2026-04-12 12:57:49,951 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/01/CAL/solo_CAL_stix-cal-energy_20250201T062624-20250202T062624_V02.fits 2026-04-12 12:57:50,115 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3igtjf21 2026-04-12 12:57:50,115 Read config from in: /tmp/ecc_context_ecc_cfg_1_3igtjf21/post_ecc.ini 2026-04-12 12:57:51,358 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3igtjf21/solo_L1_stix-cal-energy_20250224_V03U_ecc_in.fits 2026-04-12 13:07:04,933 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250224_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250224_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250224_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250224_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 13:07:11,744 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 13:07:11,751 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3igtjf21 2026-04-12 13:07:11,779 Soop found: SOOP 2026-04-12 13:07:11,881 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/24/CAL/solo_CAL_stix-cal-energy_20250223T230428-20250224T230428_V02.fits 2026-04-12 13:07:12,066 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yljwdju1 2026-04-12 13:07:12,067 Read config from in: /tmp/ecc_context_ecc_cfg_1_yljwdju1/post_ecc.ini 2026-04-12 13:07:14,985 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yljwdju1/solo_L1_stix-cal-energy_20250208_V03U_ecc_in.fits 2026-04-12 13:16:50,701 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250208_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250208_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250208_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250208_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 13:16:57,091 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 13:16:57,102 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yljwdju1 2026-04-12 13:16:57,153 Soop found: SOOP 2026-04-12 13:16:57,271 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/08/CAL/solo_CAL_stix-cal-energy_20250208T004758-20250209T004757_V02.fits 2026-04-12 13:16:57,458 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_647pa3l3 2026-04-12 13:16:57,458 Read config from in: /tmp/ecc_context_ecc_cfg_1_647pa3l3/post_ecc.ini 2026-04-12 13:16:58,706 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_647pa3l3/solo_L1_stix-cal-energy_20250205_V03U_ecc_in.fits 2026-04-12 13:26:35,693 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250205_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250205_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250205_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250205_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 13:26:41,918 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 13:26:41,924 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_647pa3l3 2026-04-12 13:26:41,956 Soop found: SOOP 2026-04-12 13:26:42,055 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/05/CAL/solo_CAL_stix-cal-energy_20250205T004738-20250206T004738_V02.fits 2026-04-12 13:26:42,223 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_brac8cyh 2026-04-12 13:26:42,223 Read config from in: /tmp/ecc_context_ecc_cfg_1_brac8cyh/post_ecc.ini 2026-04-12 13:26:43,561 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_brac8cyh/solo_L1_stix-cal-energy_20250214_V03U_ecc_in.fits 2026-04-12 13:35:55,185 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250214_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250214_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 13:36:01,494 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 13:36:01,503 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_brac8cyh 2026-04-12 13:36:01,531 Soop found: SOOP 2026-04-12 13:36:01,631 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/14/CAL/solo_CAL_stix-cal-energy_20250214T023155-20250215T023432_V02.fits 2026-04-12 13:36:01,806 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3sizdqjt 2026-04-12 13:36:01,807 Read config from in: /tmp/ecc_context_ecc_cfg_1_3sizdqjt/post_ecc.ini 2026-04-12 13:36:03,054 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3sizdqjt/solo_L1_stix-cal-energy_20250207_V03U_ecc_in.fits 2026-04-12 13:45:44,142 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250207_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250207_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250207_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250207_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 13:45:50,536 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 13:45:50,543 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3sizdqjt 2026-04-12 13:45:50,569 Soop found: SOOP 2026-04-12 13:45:50,663 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/07/CAL/solo_CAL_stix-cal-energy_20250207T004751-20250208T004751_V02.fits 2026-04-12 13:45:50,852 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ays50tg2 2026-04-12 13:45:50,852 Read config from in: /tmp/ecc_context_ecc_cfg_1_ays50tg2/post_ecc.ini 2026-04-12 13:45:52,090 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ays50tg2/solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits 2026-04-12 13:55:11,665 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 13:55:17,931 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 13:55:17,938 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ays50tg2 2026-04-12 13:55:17,970 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_tkzhcjr2 2026-04-12 13:55:17,971 Read config from in: /tmp/ecc_context_ecc_cfg_1_tkzhcjr2/post_ecc.ini 2026-04-12 13:55:19,242 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_tkzhcjr2/solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits 2026-04-12 14:00:31,981 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250220_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 14:01:45,636 Run ecc post fit: replaced [74.7 %] gain offset pairs with 'better fits' 2026-04-12 14:01:45,638 ECC result Gain_Prime 1.6022970805828656 for DET 4 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 14:01:45,638 ECC result Gain_Prime 1.6152522932999207 for DET 8 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 14:01:45,639 ECC result Gain_Prime 1.6152522932999207 for DET 10 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 14:01:45,639 ECC result Gain_Prime 1.6029081892809132 for DET 17 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 14:01:45,639 ECC result Gain_Prime 1.6016834861306815 for DET 22 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 14:01:45,639 ECC result Gain_Prime 1.6152522932999207 for DET 23 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 14:01:45,639 ECC result Gain_Prime 1.6112640008178838 for DET 24 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 14:01:45,639 ECC result Gain_Prime 1.6099929043619046 for DET 25 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 14:01:45,644 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,645 ECC result Gain_Prime 0.0 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,645 ECC result Gain_Prime 0.0 for DET 2 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,645 ECC result Gain_Prime 0.0 for DET 2 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,645 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,645 ECC result Gain_Prime 0.0 for DET 3 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,645 ECC result Gain_Prime 0.0 for DET 3 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,645 ECC result Gain_Prime 0.0 for DET 4 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 5 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 5 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 5 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 6 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 7 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 7 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 7 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,646 ECC result Gain_Prime 0.0 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 9 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 9 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 9 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 9 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 10 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 10 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 11 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,647 ECC result Gain_Prime 0.0 for DET 11 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 11 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 13 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 13 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 14 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 15 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 15 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 15 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,648 ECC result Gain_Prime 0.0 for DET 15 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 16 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 16 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 17 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 17 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 18 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 18 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 18 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 19 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,649 ECC result Gain_Prime 0.0 for DET 19 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 19 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 19 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 19 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 20 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 20 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 20 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 21 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 21 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 21 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,650 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 23 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 23 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 23 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 23 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 24 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 24 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 24 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 26 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,651 ECC result Gain_Prime 0.0 for DET 27 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 27 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 27 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 27 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 27 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 27 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 28 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 28 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 28 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 29 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,652 ECC result Gain_Prime 0.0 for DET 29 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 29 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 30 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 30 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 30 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 30 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 30 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 31 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 31 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 31 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,653 ECC result Gain_Prime 0.0 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,654 ECC result Gain_Prime 0.0 for DET 32 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 14:01:45,658 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_tkzhcjr2 2026-04-12 14:01:45,688 Soop found: SOOP 2026-04-12 14:01:45,786 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/20/CAL/solo_CAL_stix-cal-energy_20250219T225617-20250220T225616_V02.fits 2026-04-12 14:01:45,822 Soop found: SOOP 2026-04-12 14:01:45,916 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/20/CAL/solo_CAL_stix-cal-energy_20250220T225623-20250220T230002_V02.fits 2026-04-12 14:01:46,076 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_knxc0go3 2026-04-12 14:01:46,076 Read config from in: /tmp/ecc_context_ecc_cfg_1_knxc0go3/post_ecc.ini 2026-04-12 14:01:47,323 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_knxc0go3/solo_L1_stix-cal-energy_20250206_V03U_ecc_in.fits 2026-04-12 14:11:46,165 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250206_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250206_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250206_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250206_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 14:11:53,224 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 14:11:53,234 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_knxc0go3 2026-04-12 14:11:53,264 Soop found: SOOP 2026-04-12 14:11:53,367 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/06/CAL/solo_CAL_stix-cal-energy_20250206T004745-20250207T004745_V02.fits 2026-04-12 14:11:53,543 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o6wpxzsd 2026-04-12 14:11:53,544 Read config from in: /tmp/ecc_context_ecc_cfg_1_o6wpxzsd/post_ecc.ini 2026-04-12 14:11:54,807 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o6wpxzsd/solo_L1_stix-cal-energy_20250203_V03U_ecc_in.fits 2026-04-12 14:21:36,865 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250203_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250203_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250203_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250203_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 14:21:43,183 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 14:21:43,191 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o6wpxzsd 2026-04-12 14:21:43,220 Soop found: SOOP 2026-04-12 14:21:43,323 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/03/CAL/solo_CAL_stix-cal-energy_20250203T002200-20250204T003033_V02.fits 2026-04-12 14:21:43,498 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xjq5pqkq 2026-04-12 14:21:43,499 Read config from in: /tmp/ecc_context_ecc_cfg_1_xjq5pqkq/post_ecc.ini 2026-04-12 14:21:44,761 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xjq5pqkq/solo_L1_stix-cal-energy_20250217_V03U_ecc_in.fits 2026-04-12 14:31:16,670 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250217_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250217_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250217_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250217_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 14:31:23,161 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 14:31:23,173 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xjq5pqkq 2026-04-12 14:31:23,240 Soop found: SOOP 2026-04-12 14:31:23,356 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/17/CAL/solo_CAL_stix-cal-energy_20250217T025603-20250218T025603_V02.fits 2026-04-12 14:31:23,550 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_uqedhevd 2026-04-12 14:31:23,551 Read config from in: /tmp/ecc_context_ecc_cfg_1_uqedhevd/post_ecc.ini 2026-04-12 14:31:24,805 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_uqedhevd/solo_L1_stix-cal-energy_20250218_V03U_ecc_in.fits 2026-04-12 14:40:48,308 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250218_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250218_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250218_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250218_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 14:40:54,706 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 14:40:54,719 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_uqedhevd 2026-04-12 14:40:54,753 Soop found: SOOP 2026-04-12 14:40:54,753 Soop found: SOOP 2026-04-12 14:40:54,859 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/18/CAL/solo_CAL_stix-cal-energy_20250218T025609-20250218T193002_V02.fits 2026-04-12 14:40:55,040 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j8mc3d9r 2026-04-12 14:40:55,041 Read config from in: /tmp/ecc_context_ecc_cfg_1_j8mc3d9r/post_ecc.ini 2026-04-12 14:40:56,298 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j8mc3d9r/solo_L1_stix-cal-energy_20250223_V03U_ecc_in.fits 2026-04-12 14:50:12,191 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250223_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250223_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250223_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250223_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 14:50:18,474 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 14:50:18,482 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j8mc3d9r 2026-04-12 14:50:18,509 Soop found: SOOP 2026-04-12 14:50:18,509 Soop found: SOOP 2026-04-12 14:50:18,605 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/23/CAL/solo_CAL_stix-cal-energy_20250222T230422-20250223T230422_V02.fits 2026-04-12 14:50:18,770 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zt5_vpe4 2026-04-12 14:50:18,771 Read config from in: /tmp/ecc_context_ecc_cfg_1_zt5_vpe4/post_ecc.ini 2026-04-12 14:50:20,026 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zt5_vpe4/solo_L1_stix-cal-energy_20250216_V03U_ecc_in.fits 2026-04-12 14:59:56,361 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250216_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250216_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250216_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250216_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 15:00:04,265 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 15:00:04,272 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zt5_vpe4 2026-04-12 15:00:04,302 Soop found: SOOP 2026-04-12 15:00:04,401 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/16/CAL/solo_CAL_stix-cal-energy_20250216T023457-20250217T024146_V02.fits 2026-04-12 15:00:04,571 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_twubei85 2026-04-12 15:00:04,572 Read config from in: /tmp/ecc_context_ecc_cfg_1_twubei85/post_ecc.ini 2026-04-12 15:00:05,821 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_twubei85/solo_L1_stix-cal-energy_20250221_V03U_ecc_in.fits 2026-04-12 15:09:13,979 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250221_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250221_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250221_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250221_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 15:09:20,205 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 15:09:20,212 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_twubei85 2026-04-12 15:09:20,238 Soop found: SOOP 2026-04-12 15:09:20,334 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/21/CAL/solo_CAL_stix-cal-energy_20250220T230411-20250221T230410_V02.fits 2026-04-12 15:09:20,502 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zwufbggw 2026-04-12 15:09:20,503 Read config from in: /tmp/ecc_context_ecc_cfg_1_zwufbggw/post_ecc.ini 2026-04-12 15:09:21,736 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zwufbggw/solo_L1_stix-cal-energy_20250212_V03U_ecc_in.fits 2026-04-12 15:18:46,911 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250212_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250212_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250212_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250212_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 15:18:53,124 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 15:18:53,131 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zwufbggw 2026-04-12 15:18:53,158 Soop found: SOOP 2026-04-12 15:18:53,261 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/12/CAL/solo_CAL_stix-cal-energy_20250212T020108-20250213T020502_V02.fits 2026-04-12 15:18:53,440 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2rsvdaq8 2026-04-12 15:18:53,441 Read config from in: /tmp/ecc_context_ecc_cfg_1_2rsvdaq8/post_ecc.ini 2026-04-12 15:18:54,698 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2rsvdaq8/solo_L1_stix-cal-energy_20250227_V03U_ecc_in.fits 2026-04-12 15:28:22,338 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250227_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250227_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250227_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250227_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 15:28:28,560 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 15:28:28,567 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2rsvdaq8 2026-04-12 15:28:28,600 Soop found: SOOP 2026-04-12 15:28:28,727 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/27/CAL/solo_CAL_stix-cal-energy_20250226T230447-20250227T230447_V02.fits 2026-04-12 15:28:28,954 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_omthm3md 2026-04-12 15:28:28,955 Read config from in: /tmp/ecc_context_ecc_cfg_1_omthm3md/post_ecc.ini 2026-04-12 15:28:30,201 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_omthm3md/solo_L1_stix-cal-energy_20250211_V03U_ecc_in.fits 2026-04-12 15:38:01,930 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250211_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250211_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250211_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250211_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 15:38:08,237 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 15:38:08,246 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_omthm3md 2026-04-12 15:38:08,304 Soop found: SOOP 2026-04-12 15:38:08,420 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/11/CAL/solo_CAL_stix-cal-energy_20250211T015959-20250212T020021_V02.fits 2026-04-12 15:38:08,618 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1f12np74 2026-04-12 15:38:08,619 Read config from in: /tmp/ecc_context_ecc_cfg_1_1f12np74/post_ecc.ini 2026-04-12 15:38:09,870 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1f12np74/solo_L1_stix-cal-energy_20250226_V03U_ecc_in.fits 2026-04-12 15:47:30,363 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250226_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250226_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250226_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250226_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 15:47:36,654 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 15:47:36,661 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1f12np74 2026-04-12 15:47:36,688 Soop found: SOOP 2026-04-12 15:47:36,784 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/26/CAL/solo_CAL_stix-cal-energy_20250225T230441-20250226T230440_V02.fits 2026-04-12 15:47:36,950 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_z9olk00f 2026-04-12 15:47:36,951 Read config from in: /tmp/ecc_context_ecc_cfg_1_z9olk00f/post_ecc.ini 2026-04-12 15:47:39,723 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_z9olk00f/solo_L1_stix-cal-energy_20250219_V03U_ecc_in.fits 2026-04-12 15:57:15,099 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250219_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250219_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250219_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250219_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 15:57:21,303 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 15:57:21,310 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_z9olk00f 2026-04-12 15:57:21,340 Soop found: SOOP 2026-04-12 15:57:21,438 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/19/CAL/solo_CAL_stix-cal-energy_20250218T225610-20250219T225610_V02.fits 2026-04-12 15:57:21,604 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2ban36v9 2026-04-12 15:57:21,605 Read config from in: /tmp/ecc_context_ecc_cfg_1_2ban36v9/post_ecc.ini 2026-04-12 15:57:22,850 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2ban36v9/solo_L1_stix-cal-energy_20250222_V03U_ecc_in.fits 2026-04-12 16:06:43,796 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250222_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250222_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250222_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250222_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 16:06:50,155 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 16:06:50,163 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_2ban36v9 2026-04-12 16:06:50,189 Soop found: SOOP 2026-04-12 16:06:50,283 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/22/CAL/solo_CAL_stix-cal-energy_20250221T230417-20250222T230416_V02.fits 2026-04-12 16:06:50,450 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1zcc6tc3 2026-04-12 16:06:50,450 Read config from in: /tmp/ecc_context_ecc_cfg_1_1zcc6tc3/post_ecc.ini 2026-04-12 16:06:51,686 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1zcc6tc3/solo_L1_stix-cal-energy_20250225_V03U_ecc_in.fits 2026-04-12 16:16:08,602 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250225_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250225_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250225_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250225_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 16:16:14,885 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 16:16:14,891 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1zcc6tc3 2026-04-12 16:16:14,918 Soop found: SOOP 2026-04-12 16:16:15,015 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/25/CAL/solo_CAL_stix-cal-energy_20250224T230434-20250225T230435_V02.fits 2026-04-12 16:16:15,180 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xjsmhtki 2026-04-12 16:16:15,181 Read config from in: /tmp/ecc_context_ecc_cfg_1_xjsmhtki/post_ecc.ini 2026-04-12 16:16:16,430 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xjsmhtki/solo_L1_stix-cal-energy_20250228_V03U_ecc_in.fits 2026-04-12 16:25:37,716 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250228_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250228_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250228_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250228_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 16:25:44,027 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 16:25:44,033 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xjsmhtki 2026-04-12 16:25:44,062 Soop found: SOOP 2026-04-12 16:25:44,157 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/28/CAL/solo_CAL_stix-cal-energy_20250227T230453-20250228T230453_V02.fits 2026-04-12 16:25:44,319 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sbuz1u63 2026-04-12 16:25:44,320 Read config from in: /tmp/ecc_context_ecc_cfg_1_sbuz1u63/post_ecc.ini 2026-04-12 16:25:45,572 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sbuz1u63/solo_L1_stix-cal-energy_20250209_V03U_ecc_in.fits 2026-04-12 16:35:21,292 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250209_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250209_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250209_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250209_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 16:35:27,741 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 16:35:27,749 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sbuz1u63 2026-04-12 16:35:27,775 Soop found: SOOP 2026-04-12 16:35:27,775 Soop found: SOOP 2026-04-12 16:35:27,874 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/09/CAL/solo_CAL_stix-cal-energy_20250209T004804-20250210T011827_V02.fits 2026-04-12 16:35:28,038 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_rco5sj6w 2026-04-12 16:35:28,039 Read config from in: /tmp/ecc_context_ecc_cfg_1_rco5sj6w/post_ecc.ini 2026-04-12 16:35:29,294 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_rco5sj6w/solo_L1_stix-cal-energy_20250202_V03U_ecc_in.fits 2026-04-12 16:44:50,004 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250202_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250202_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250202_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250202_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 16:44:58,629 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 16:44:58,636 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_rco5sj6w 2026-04-12 16:44:58,664 Soop found: SOOP 2026-04-12 16:44:58,664 Soop found: SOOP 2026-04-12 16:44:58,765 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/02/CAL/solo_CAL_stix-cal-energy_20250202T062630-20250203T000002_V02.fits 2026-04-12 16:44:58,937 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ulpcwtyy 2026-04-12 16:44:58,937 Read config from in: /tmp/ecc_context_ecc_cfg_1_ulpcwtyy/post_ecc.ini 2026-04-12 16:45:00,199 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ulpcwtyy/solo_L1_stix-cal-energy_20250213_V03U_ecc_in.fits 2026-04-12 16:54:21,407 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250213_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250213_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250213_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250213_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 16:54:27,616 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 16:54:27,624 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ulpcwtyy 2026-04-12 16:54:27,650 Soop found: SOOP 2026-04-12 16:54:27,746 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/13/CAL/solo_CAL_stix-cal-energy_20250213T023146-20250214T023149_V02.fits 2026-04-12 16:54:27,915 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5sm_v3xg 2026-04-12 16:54:27,915 Read config from in: /tmp/ecc_context_ecc_cfg_1_5sm_v3xg/post_ecc.ini 2026-04-12 16:54:29,144 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5sm_v3xg/solo_L1_stix-cal-energy_20250215_V03U_ecc_in.fits 2026-04-12 17:04:03,693 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250215_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250215_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250215_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250215_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 17:04:10,078 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 17:04:10,085 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5sm_v3xg 2026-04-12 17:04:10,119 Soop found: SOOP 2026-04-12 17:04:10,119 Soop found: SOOP 2026-04-12 17:04:10,218 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/15/CAL/solo_CAL_stix-cal-energy_20250215T023451-20250216T023451_V02.fits 2026-04-12 17:04:10,387 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_i7zw6kr5 2026-04-12 17:04:10,388 Read config from in: /tmp/ecc_context_ecc_cfg_1_i7zw6kr5/post_ecc.ini 2026-04-12 17:04:11,703 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_i7zw6kr5/solo_L1_stix-cal-energy_20250204_V03U_ecc_in.fits 2026-04-12 17:13:34,050 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250204_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250204_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250204_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250204_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 17:13:40,356 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 17:13:40,363 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_i7zw6kr5 2026-04-12 17:13:40,398 Soop found: SOOP 2026-04-12 17:13:40,498 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/02/04/CAL/solo_CAL_stix-cal-energy_20250204T004714-20250205T004733_V02.fits 2026-04-12 17:13:40,665 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_te2n_2l_ 2026-04-12 17:13:40,666 Read config from in: /tmp/ecc_context_ecc_cfg_1_te2n_2l_/post_ecc.ini 2026-04-12 17:13:41,917 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_te2n_2l_/solo_L1_stix-cal-energy_20250430_V03U_ecc_in.fits 2026-04-12 17:23:28,022 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250430_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250430_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250430_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250430_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 17:23:34,459 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 17:23:34,467 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_te2n_2l_ 2026-04-12 17:23:34,511 Soop found: SOOP 2026-04-12 17:23:34,512 Soop found: SOOP 2026-04-12 17:23:34,617 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/30/CAL/solo_CAL_stix-cal-energy_20250430T030101-20250501T031921_V02.fits 2026-04-12 17:23:34,786 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_h2k6ujub 2026-04-12 17:23:34,788 Read config from in: /tmp/ecc_context_ecc_cfg_1_h2k6ujub/post_ecc.ini 2026-04-12 17:23:36,024 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_h2k6ujub/solo_L1_stix-cal-energy_20250410_V03U_ecc_in.fits 2026-04-12 17:33:00,454 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250410_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250410_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250410_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250410_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 17:33:07,052 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 17:33:07,060 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_h2k6ujub 2026-04-12 17:33:07,089 Soop found: SOOP 2026-04-12 17:33:07,089 Soop found: SOOP 2026-04-12 17:33:07,188 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/10/CAL/solo_CAL_stix-cal-energy_20250410T000444-20250411T000444_V02.fits 2026-04-12 17:33:07,356 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kew60wy2 2026-04-12 17:33:07,356 Read config from in: /tmp/ecc_context_ecc_cfg_1_kew60wy2/post_ecc.ini 2026-04-12 17:33:10,297 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kew60wy2/solo_L1_stix-cal-energy_20250401_V03U_ecc_in.fits 2026-04-12 17:43:29,103 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250401_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250401_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250401_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250401_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 17:43:35,384 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 17:43:35,392 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kew60wy2 2026-04-12 17:43:35,421 Soop found: SOOP 2026-04-12 17:43:35,421 Soop found: SOOP 2026-04-12 17:43:35,421 Soop found: SOOP 2026-04-12 17:43:35,522 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/01/CAL/solo_CAL_stix-cal-energy_20250401T003337-20250402T005312_V02.fits 2026-04-12 17:43:35,695 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jgjd1qpi 2026-04-12 17:43:35,696 Read config from in: /tmp/ecc_context_ecc_cfg_1_jgjd1qpi/post_ecc.ini 2026-04-12 17:43:36,947 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jgjd1qpi/solo_L1_stix-cal-energy_20250424_V03U_ecc_in.fits 2026-04-12 17:53:31,512 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250424_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250424_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250424_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250424_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 17:53:37,856 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 17:53:37,865 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_jgjd1qpi 2026-04-12 17:53:37,894 Soop found: SOOP 2026-04-12 17:53:37,894 Soop found: SOOP 2026-04-12 17:53:37,894 Soop found: SOOP 2026-04-12 17:53:37,894 Soop found: SOOP 2026-04-12 17:53:37,995 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/24/CAL/solo_CAL_stix-cal-energy_20250424T003302-20250425T000002_V02.fits 2026-04-12 17:53:38,168 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_37p1cmkk 2026-04-12 17:53:38,169 Read config from in: /tmp/ecc_context_ecc_cfg_1_37p1cmkk/post_ecc.ini 2026-04-12 17:53:39,423 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_37p1cmkk/solo_L1_stix-cal-energy_20250408_V03U_ecc_in.fits 2026-04-12 18:03:15,579 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250408_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250408_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250408_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250408_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 18:03:22,287 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 18:03:22,295 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_37p1cmkk 2026-04-12 18:03:22,327 Soop found: SOOP 2026-04-12 18:03:22,327 Soop found: SOOP 2026-04-12 18:03:22,428 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/08/CAL/solo_CAL_stix-cal-energy_20250408T000246-20250409T000247_V02.fits 2026-04-12 18:03:22,600 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_srg2rp23 2026-04-12 18:03:22,601 Read config from in: /tmp/ecc_context_ecc_cfg_1_srg2rp23/post_ecc.ini 2026-04-12 18:03:23,850 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_srg2rp23/solo_L1_stix-cal-energy_20250405_V03U_ecc_in.fits 2026-04-12 18:13:22,872 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250405_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250405_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250405_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250405_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 18:13:29,152 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 18:13:29,160 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_srg2rp23 2026-04-12 18:13:29,190 Soop found: SOOP 2026-04-12 18:13:29,290 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/05/CAL/solo_CAL_stix-cal-energy_20250404T235423-20250405T235423_V02.fits 2026-04-12 18:13:29,455 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3ur2n3ys 2026-04-12 18:13:29,456 Read config from in: /tmp/ecc_context_ecc_cfg_1_3ur2n3ys/post_ecc.ini 2026-04-12 18:13:30,698 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3ur2n3ys/solo_L1_stix-cal-energy_20250414_V03U_ecc_in.fits 2026-04-12 18:23:38,970 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250414_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250414_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250414_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250414_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 18:23:46,003 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 18:23:46,013 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3ur2n3ys 2026-04-12 18:23:46,047 Soop found: SOOP 2026-04-12 18:23:46,047 Soop found: SOOP 2026-04-12 18:23:46,152 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/14/CAL/solo_CAL_stix-cal-energy_20250414T034155-20250415T040819_V02.fits 2026-04-12 18:23:46,343 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bkcq2gv1 2026-04-12 18:23:46,344 Read config from in: /tmp/ecc_context_ecc_cfg_1_bkcq2gv1/post_ecc.ini 2026-04-12 18:23:47,606 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bkcq2gv1/solo_L1_stix-cal-energy_20250407_V03U_ecc_in.fits 2026-04-12 18:33:16,275 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250407_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250407_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250407_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250407_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 18:33:24,337 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 18:33:24,345 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_bkcq2gv1 2026-04-12 18:33:24,371 Soop found: SOOP 2026-04-12 18:33:24,371 Soop found: SOOP 2026-04-12 18:33:24,465 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/07/CAL/solo_CAL_stix-cal-energy_20250407T000241-20250408T000240_V02.fits 2026-04-12 18:33:24,631 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b5vcnu5_ 2026-04-12 18:33:24,632 Read config from in: /tmp/ecc_context_ecc_cfg_1_b5vcnu5_/post_ecc.ini 2026-04-12 18:33:25,887 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b5vcnu5_/solo_L1_stix-cal-energy_20250420_V03U_ecc_in.fits 2026-04-12 18:43:30,495 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250420_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250420_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250420_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250420_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 18:43:36,802 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 18:43:36,809 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_b5vcnu5_ 2026-04-12 18:43:36,841 Soop found: SOOP 2026-04-12 18:43:36,841 Soop found: SOOP 2026-04-12 18:43:36,934 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/20/CAL/solo_CAL_stix-cal-energy_20250420T045833-20250421T000002_V02.fits 2026-04-12 18:43:37,116 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gj42lgcz 2026-04-12 18:43:37,117 Read config from in: /tmp/ecc_context_ecc_cfg_1_gj42lgcz/post_ecc.ini 2026-04-12 18:43:38,361 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gj42lgcz/solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits 2026-04-12 18:53:14,722 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 18:53:21,063 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 18:53:21,070 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gj42lgcz 2026-04-12 18:53:21,104 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e2t7yv1m 2026-04-12 18:53:21,105 Read config from in: /tmp/ecc_context_ecc_cfg_1_e2t7yv1m/post_ecc.ini 2026-04-12 18:53:22,363 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e2t7yv1m/solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits 2026-04-12 18:59:24,367 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250406_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 19:00:21,283 Run ecc post fit: replaced [77.1 %] gain offset pairs with 'better fits' 2026-04-12 19:00:21,285 ECC result Gain_Prime 1.6166475111877348 for DET 4 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,285 ECC result Gain_Prime 1.6152522932999207 for DET 8 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,285 ECC result Gain_Prime 1.61126400081792 for DET 8 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,285 ECC result Gain_Prime 1.612602169493188 for DET 13 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,285 ECC result Gain_Prime 1.6027770235527512 for DET 14 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,286 ECC result Gain_Prime 1.602878897099416 for DET 14 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,286 ECC result Gain_Prime 1.6152522932999207 for DET 17 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,286 ECC result Gain_Prime 1.6152522932999207 for DET 21 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,286 ECC result Gain_Prime 1.602748589318157 for DET 24 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,286 ECC result Gain_Prime 1.6152522932999207 for DET 31 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2026-04-12 19:00:21,286 ECC result Gain_Prime 0.0 for DET 1 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,286 ECC result Gain_Prime 0.0 for DET 1 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 1 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 1 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 2 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 2 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 3 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 3 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,287 ECC result Gain_Prime 0.0 for DET 3 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 3 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 3 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 4 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 4 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 5 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 5 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 5 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 5 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 5 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,288 ECC result Gain_Prime 0.0 for DET 6 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 9 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 9 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 10 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 11 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 11 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,289 ECC result Gain_Prime 0.0 for DET 12 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 13 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 13 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 13 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 14 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 15 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 16 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 16 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 16 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,290 ECC result Gain_Prime 0.0 for DET 16 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 16 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 17 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 17 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 18 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 18 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 18 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 20 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 21 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,291 ECC result Gain_Prime 0.0 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 22 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 23 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 23 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 23 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 23 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 24 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 24 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 25 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 25 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,292 ECC result Gain_Prime 0.0 for DET 25 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 25 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 26 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 27 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 27 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 27 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 28 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 29 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 30 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 30 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,293 ECC result Gain_Prime 0.0 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,294 ECC result Gain_Prime 0.0 for DET 32 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,294 ECC result Gain_Prime 0.0 for DET 32 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,294 ECC result Gain_Prime 0.0 for DET 32 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,294 ECC result Gain_Prime 0.0 for DET 32 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,294 ECC result Gain_Prime 0.0 for DET 32 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 19:00:21,299 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e2t7yv1m 2026-04-12 19:00:21,326 Soop found: SOOP 2026-04-12 19:00:21,326 Soop found: SOOP 2026-04-12 19:00:21,326 Soop found: SOOP 2026-04-12 19:00:21,326 Soop found: SOOP 2026-04-12 19:00:21,422 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/06/CAL/solo_CAL_stix-cal-energy_20250405T235429-20250406T235429_V02.fits 2026-04-12 19:00:21,463 Soop found: SOOP 2026-04-12 19:00:21,463 Soop found: SOOP 2026-04-12 19:00:21,555 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/06/CAL/solo_CAL_stix-cal-energy_20250406T235435-20250407T000002_V02.fits 2026-04-12 19:00:21,721 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kb5evqcv 2026-04-12 19:00:21,722 Read config from in: /tmp/ecc_context_ecc_cfg_1_kb5evqcv/post_ecc.ini 2026-04-12 19:00:23,011 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kb5evqcv/solo_L1_stix-cal-energy_20250403_V03U_ecc_in.fits 2026-04-12 19:10:24,505 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250403_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250403_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250403_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250403_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 19:10:32,062 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 19:10:32,069 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_kb5evqcv 2026-04-12 19:10:32,096 Soop found: SOOP 2026-04-12 19:10:32,096 Soop found: SOOP 2026-04-12 19:10:32,096 Soop found: SOOP 2026-04-12 19:10:32,096 Soop found: SOOP 2026-04-12 19:10:32,196 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/03/CAL/solo_CAL_stix-cal-energy_20250403T005324-20250403T235008_V02.fits 2026-04-12 19:10:32,368 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yeknikn0 2026-04-12 19:10:32,369 Read config from in: /tmp/ecc_context_ecc_cfg_1_yeknikn0/post_ecc.ini 2026-04-12 19:10:33,611 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yeknikn0/solo_L1_stix-cal-energy_20250417_V03U_ecc_in.fits 2026-04-12 19:20:40,986 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250417_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250417_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250417_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250417_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 19:20:49,961 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 19:20:49,969 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_yeknikn0 2026-04-12 19:20:49,997 Soop found: SOOP 2026-04-12 19:20:49,997 Soop found: SOOP 2026-04-12 19:20:50,097 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/17/CAL/solo_CAL_stix-cal-energy_20250417T044442-20250418T044442_V02.fits 2026-04-12 19:20:50,269 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ouesejfz 2026-04-12 19:20:50,270 Read config from in: /tmp/ecc_context_ecc_cfg_1_ouesejfz/post_ecc.ini 2026-04-12 19:20:51,518 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ouesejfz/solo_L1_stix-cal-energy_20250418_V03U_ecc_in.fits 2026-04-12 19:30:39,253 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250418_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250418_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250418_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250418_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 19:30:45,524 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 19:30:45,535 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ouesejfz 2026-04-12 19:30:45,564 Soop found: SOOP 2026-04-12 19:30:45,565 Soop found: SOOP 2026-04-12 19:30:45,659 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/18/CAL/solo_CAL_stix-cal-energy_20250418T044449-20250419T044906_V02.fits 2026-04-12 19:30:45,824 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gezi4b9o 2026-04-12 19:30:45,825 Read config from in: /tmp/ecc_context_ecc_cfg_1_gezi4b9o/post_ecc.ini 2026-04-12 19:30:47,052 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gezi4b9o/solo_L1_stix-cal-energy_20250423_V03U_ecc_in.fits 2026-04-12 19:40:25,959 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250423_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250423_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250423_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250423_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 19:40:32,163 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 19:40:32,170 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gezi4b9o 2026-04-12 19:40:32,196 Soop found: SOOP 2026-04-12 19:40:32,196 Soop found: SOOP 2026-04-12 19:40:32,197 Soop found: SOOP 2026-04-12 19:40:32,293 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/23/CAL/solo_CAL_stix-cal-energy_20250423T003113-20250424T003120_V02.fits 2026-04-12 19:40:32,466 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_y0ribwq4 2026-04-12 19:40:32,467 Read config from in: /tmp/ecc_context_ecc_cfg_1_y0ribwq4/post_ecc.ini 2026-04-12 19:40:33,705 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_y0ribwq4/solo_L1_stix-cal-energy_20250416_V03U_ecc_in.fits 2026-04-12 19:50:44,103 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250416_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250416_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250416_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250416_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 19:50:50,462 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 19:50:50,469 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_y0ribwq4 2026-04-12 19:50:50,499 Soop found: SOOP 2026-04-12 19:50:50,499 Soop found: SOOP 2026-04-12 19:50:50,594 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/16/CAL/solo_CAL_stix-cal-energy_20250416T043641-20250417T044430_V02.fits 2026-04-12 19:50:50,755 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3snviyfv 2026-04-12 19:50:50,755 Read config from in: /tmp/ecc_context_ecc_cfg_1_3snviyfv/post_ecc.ini 2026-04-12 19:50:52,097 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3snviyfv/solo_L1_stix-cal-energy_20250421_V03U_ecc_in.fits 2026-04-12 20:00:49,328 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250421_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250421_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250421_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250421_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 20:00:55,541 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 20:00:55,549 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3snviyfv 2026-04-12 20:00:55,578 Soop found: SOOP 2026-04-12 20:00:55,578 Soop found: SOOP 2026-04-12 20:00:55,674 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/21/CAL/solo_CAL_stix-cal-energy_20250421T002400-20250422T002401_V02.fits 2026-04-12 20:00:55,845 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_868gef5d 2026-04-12 20:00:55,845 Read config from in: /tmp/ecc_context_ecc_cfg_1_868gef5d/post_ecc.ini 2026-04-12 20:00:57,072 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_868gef5d/solo_L1_stix-cal-energy_20250412_V03U_ecc_in.fits 2026-04-12 20:10:35,918 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250412_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250412_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250412_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250412_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 20:10:42,270 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 20:10:42,277 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_868gef5d 2026-04-12 20:10:42,307 Soop found: SOOP 2026-04-12 20:10:42,307 Soop found: SOOP 2026-04-12 20:10:42,401 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/12/CAL/solo_CAL_stix-cal-energy_20250412T000804-20250413T000804_V02.fits 2026-04-12 20:10:42,564 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3ngqjq20 2026-04-12 20:10:42,565 Read config from in: /tmp/ecc_context_ecc_cfg_1_3ngqjq20/post_ecc.ini 2026-04-12 20:10:43,799 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3ngqjq20/solo_L1_stix-cal-energy_20250427_V03U_ecc_in.fits 2026-04-12 20:20:28,806 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250427_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250427_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250427_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250427_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 20:20:36,848 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 20:20:36,856 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3ngqjq20 2026-04-12 20:20:36,882 Soop found: SOOP 2026-04-12 20:20:36,882 Soop found: SOOP 2026-04-12 20:20:36,882 Soop found: SOOP 2026-04-12 20:20:36,975 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/27/CAL/solo_CAL_stix-cal-energy_20250427T013002-20250428T020434_V02.fits 2026-04-12 20:20:37,137 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qdvljx2u 2026-04-12 20:20:37,138 Read config from in: /tmp/ecc_context_ecc_cfg_1_qdvljx2u/post_ecc.ini 2026-04-12 20:20:38,392 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qdvljx2u/solo_L1_stix-cal-energy_20250411_V03U_ecc_in.fits 2026-04-12 20:30:13,363 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250411_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250411_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250411_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250411_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 20:30:19,596 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 20:30:19,603 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qdvljx2u 2026-04-12 20:30:19,629 Soop found: SOOP 2026-04-12 20:30:19,629 Soop found: SOOP 2026-04-12 20:30:19,723 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/11/CAL/solo_CAL_stix-cal-energy_20250411T000450-20250412T000733_V02.fits 2026-04-12 20:30:19,886 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__dfq9s0k 2026-04-12 20:30:19,886 Read config from in: /tmp/ecc_context_ecc_cfg_1__dfq9s0k/post_ecc.ini 2026-04-12 20:30:21,133 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__dfq9s0k/solo_L1_stix-cal-energy_20250426_V03U_ecc_in.fits 2026-04-12 20:40:04,524 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250426_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250426_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250426_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250426_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 20:40:10,779 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 20:40:10,785 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__dfq9s0k 2026-04-12 20:40:10,812 Soop found: SOOP 2026-04-12 20:40:10,812 Soop found: SOOP 2026-04-12 20:40:10,812 Soop found: SOOP 2026-04-12 20:40:10,906 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/26/CAL/solo_CAL_stix-cal-energy_20250426T012956-20250427T012956_V02.fits 2026-04-12 20:40:11,076 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_mgcwg9dy 2026-04-12 20:40:11,076 Read config from in: /tmp/ecc_context_ecc_cfg_1_mgcwg9dy/post_ecc.ini 2026-04-12 20:40:12,428 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_mgcwg9dy/solo_L1_stix-cal-energy_20250419_V03U_ecc_in.fits 2026-04-12 20:49:56,598 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250419_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250419_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250419_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250419_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 20:50:02,987 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 20:50:02,994 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_mgcwg9dy 2026-04-12 20:50:03,022 Soop found: SOOP 2026-04-12 20:50:03,022 Soop found: SOOP 2026-04-12 20:50:03,117 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/19/CAL/solo_CAL_stix-cal-energy_20250419T045828-20250420T045827_V02.fits 2026-04-12 20:50:03,284 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_d4g3aymw 2026-04-12 20:50:03,285 Read config from in: /tmp/ecc_context_ecc_cfg_1_d4g3aymw/post_ecc.ini 2026-04-12 20:50:04,590 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_d4g3aymw/solo_L1_stix-cal-energy_20250422_V03U_ecc_in.fits 2026-04-12 20:59:55,723 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250422_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250422_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250422_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250422_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 21:00:02,189 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 21:00:02,196 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_d4g3aymw 2026-04-12 21:00:02,226 Soop found: SOOP 2026-04-12 21:00:02,227 Soop found: SOOP 2026-04-12 21:00:02,327 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/22/CAL/solo_CAL_stix-cal-energy_20250422T002407-20250423T002600_V02.fits 2026-04-12 21:00:02,508 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_twcwl7yp 2026-04-12 21:00:02,508 Read config from in: /tmp/ecc_context_ecc_cfg_1_twcwl7yp/post_ecc.ini 2026-04-12 21:00:03,752 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_twcwl7yp/solo_L1_stix-cal-energy_20250425_V03U_ecc_in.fits 2026-04-12 21:09:38,297 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250425_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250425_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250425_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250425_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 21:09:44,562 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 21:09:44,568 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_twcwl7yp 2026-04-12 21:09:44,597 Soop found: SOOP 2026-04-12 21:09:44,597 Soop found: SOOP 2026-04-12 21:09:44,597 Soop found: SOOP 2026-04-12 21:09:44,597 Soop found: SOOP 2026-04-12 21:09:44,598 Soop found: SOOP 2026-04-12 21:09:44,598 Soop found: SOOP 2026-04-12 21:09:44,691 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/25/CAL/solo_CAL_stix-cal-energy_20250425T010440-20250426T010518_V02.fits 2026-04-12 21:09:44,852 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_guo_njwi 2026-04-12 21:09:44,853 Read config from in: /tmp/ecc_context_ecc_cfg_1_guo_njwi/post_ecc.ini 2026-04-12 21:09:46,093 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_guo_njwi/solo_L1_stix-cal-energy_20250428_V03U_ecc_in.fits 2026-04-12 21:19:23,940 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250428_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250428_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250428_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250428_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 21:19:31,732 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 21:19:31,739 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_guo_njwi 2026-04-12 21:19:31,764 Soop found: SOOP 2026-04-12 21:19:31,764 Soop found: SOOP 2026-04-12 21:19:31,765 Soop found: SOOP 2026-04-12 21:19:31,857 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/28/CAL/solo_CAL_stix-cal-energy_20250428T025710-20250429T025709_V02.fits 2026-04-12 21:19:32,021 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__8pdoqtj 2026-04-12 21:19:32,022 Read config from in: /tmp/ecc_context_ecc_cfg_1__8pdoqtj/post_ecc.ini 2026-04-12 21:19:33,269 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__8pdoqtj/solo_L1_stix-cal-energy_20250409_V03U_ecc_in.fits 2026-04-12 21:28:54,596 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250409_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250409_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250409_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250409_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 21:29:00,868 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 21:29:00,875 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__8pdoqtj 2026-04-12 21:29:00,901 Soop found: SOOP 2026-04-12 21:29:00,901 Soop found: SOOP 2026-04-12 21:29:00,901 Soop found: SOOP 2026-04-12 21:29:00,996 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/09/CAL/solo_CAL_stix-cal-energy_20250409T000306-20250410T000318_V02.fits 2026-04-12 21:29:01,158 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cyotph9j 2026-04-12 21:29:01,158 Read config from in: /tmp/ecc_context_ecc_cfg_1_cyotph9j/post_ecc.ini 2026-04-12 21:29:02,401 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cyotph9j/solo_L1_stix-cal-energy_20250429_V03U_ecc_in.fits 2026-04-12 21:38:44,407 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250429_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250429_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250429_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250429_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 21:38:50,705 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 21:38:50,712 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cyotph9j 2026-04-12 21:38:50,739 Soop found: SOOP 2026-04-12 21:38:50,739 Soop found: SOOP 2026-04-12 21:38:50,739 Soop found: SOOP 2026-04-12 21:38:50,833 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/29/CAL/solo_CAL_stix-cal-energy_20250429T025715-20250430T025718_V02.fits 2026-04-12 21:38:50,998 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8f6iewsm 2026-04-12 21:38:50,999 Read config from in: /tmp/ecc_context_ecc_cfg_1_8f6iewsm/post_ecc.ini 2026-04-12 21:38:52,236 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8f6iewsm/solo_L1_stix-cal-energy_20250402_V03U_ecc_in.fits 2026-04-12 21:49:17,803 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250402_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250402_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250402_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250402_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 21:49:25,115 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 21:49:25,122 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_8f6iewsm 2026-04-12 21:49:25,150 Soop found: SOOP 2026-04-12 21:49:25,150 Soop found: SOOP 2026-04-12 21:49:25,245 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/02/CAL/solo_CAL_stix-cal-energy_20250402T005318-20250403T005318_V02.fits 2026-04-12 21:49:25,410 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3_0zn9xo 2026-04-12 21:49:25,411 Read config from in: /tmp/ecc_context_ecc_cfg_1_3_0zn9xo/post_ecc.ini 2026-04-12 21:49:26,655 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3_0zn9xo/solo_L1_stix-cal-energy_20250413_V03U_ecc_in.fits 2026-04-12 21:58:57,005 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250413_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250413_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250413_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250413_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 21:59:03,617 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 21:59:03,620 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2026-04-12 21:59:03,625 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3_0zn9xo 2026-04-12 21:59:03,653 Soop found: SOOP 2026-04-12 21:59:03,653 Soop found: SOOP 2026-04-12 21:59:03,654 Soop found: SOOP 2026-04-12 21:59:03,751 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/13/CAL/solo_CAL_stix-cal-energy_20250413T000810-20250414T025748_V02.fits 2026-04-12 21:59:03,918 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vzlxe9zo 2026-04-12 21:59:03,919 Read config from in: /tmp/ecc_context_ecc_cfg_1_vzlxe9zo/post_ecc.ini 2026-04-12 21:59:05,184 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vzlxe9zo/solo_L1_stix-cal-energy_20250415_V03U_ecc_in.fits 2026-04-12 22:09:28,093 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250415_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250415_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250415_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250415_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 22:09:34,444 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2026-04-12 22:09:34,452 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_vzlxe9zo 2026-04-12 22:09:34,484 Soop found: SOOP 2026-04-12 22:09:34,485 Soop found: SOOP 2026-04-12 22:09:34,580 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/15/CAL/solo_CAL_stix-cal-energy_20250415T043630-20250416T043631_V02.fits 2026-04-12 22:09:34,743 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_g8zoavu_ 2026-04-12 22:09:34,743 Read config from in: /tmp/ecc_context_ecc_cfg_1_g8zoavu_/post_ecc.ini 2026-04-12 22:09:37,543 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_g8zoavu_/solo_L1_stix-cal-energy_20250404_V03U_ecc_in.fits 2026-04-12 22:19:44,266 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20250404_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=10 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20250404_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20250404_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20250404_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2026-04-12 22:19:50,786 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2026-04-12 22:19:50,794 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_g8zoavu_ 2026-04-12 22:19:50,822 Soop found: SOOP 2026-04-12 22:19:50,917 Writing fits file to /data/stix/out/fits_v1.2.0/CAL/2025/04/04/CAL/solo_CAL_stix-cal-energy_20250403T235417-20250404T235417_V02.fits