2025-09-25 12:47:29,847 read rid-lut from stixcore/data/publish/rid_lut.csv 2025-09-25 12:47:30,898 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20250924_002.tm 2025-09-25 12:47:31,155 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20250924_002.tm 2025-09-25 12:47:31,155 Create SOCManager @ /data/stix/out/fits_utest/tm/processing 2025-09-25 12:47:31,161 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2025-09-25 12:47:31,202 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2025-09-25 12:47:31,202 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2025-09-25 12:47:31,203 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2025-09-25 12:47:31,203 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2025-09-25 12:47:31,204 newer version (3200) found for LTP21_Sep2025-Dec2025: replacing 2025-09-25 12:47:31,205 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2025-09-25 12:47:31,206 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2025-09-25 12:47:31,206 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2025-09-25 12:47:31,207 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2025-09-25 12:47:31,207 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2025-09-25 12:47:31,209 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2025-09-25 12:47:31,209 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2025-09-25 12:47:31,210 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2025-09-25 12:47:31,210 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2025-09-25 12:47:31,211 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2025-09-25 12:47:31,211 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2025-09-25 12:47:31,212 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2025-09-25 12:47:31,213 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2025-09-25 12:47:31,213 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2025-09-25 12:47:31,213 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2025-09-25 12:47:31,214 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2025-09-25 12:47:31,214 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2025-09-25 12:47:31,216 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2025-09-25 12:47:31,216 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2025-09-25 12:47:31,217 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2025-09-25 12:47:31,217 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2025-09-25 12:47:31,218 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2025-09-25 12:47:31,218 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2025-09-25 12:47:31,219 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2025-09-25 12:47:31,219 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2025-09-25 12:47:31,220 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2025-09-25 12:47:31,220 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2025-09-25 12:47:31,222 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2025-09-25 12:47:31,222 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2025-09-25 12:47:31,222 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2025-09-25 12:47:31,223 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2025-09-25 12:47:31,224 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2025-09-25 12:47:31,224 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2025-09-25 12:47:31,224 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2025-09-25 12:47:31,224 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2025-09-25 12:47:31,225 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2025-09-25 12:47:31,225 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2025-09-25 12:47:31,226 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2025-09-25 12:47:31,226 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2025-09-25 12:47:31,227 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2025-09-25 12:47:31,227 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2025-09-25 12:47:31,228 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2025-09-25 12:47:31,228 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2025-09-25 12:47:31,229 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2025-09-25 12:47:31,229 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2025-09-25 12:47:31,229 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2025-09-25 12:47:31,230 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2025-09-25 12:47:31,230 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2025-09-25 12:47:31,230 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2025-09-25 12:47:31,231 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2025-09-25 12:47:31,232 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2025-09-25 12:47:31,233 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2025-09-25 12:47:31,233 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2025-09-25 12:47:31,234 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2025-09-25 12:47:31,234 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2025-09-25 12:47:31,235 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2025-09-25 12:47:31,236 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2025-09-25 12:47:31,237 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2025-09-25 12:47:31,237 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2025-09-25 12:47:31,237 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2025-09-25 12:47:31,238 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2025-09-25 12:47:31,238 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2025-09-25 12:47:31,238 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2025-09-25 12:47:31,238 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2025-09-25 12:47:31,239 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2025-09-25 12:47:31,239 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2025-09-25 12:47:31,239 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2025-09-25 12:47:31,239 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2025-09-25 12:47:31,239 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2025-09-25 12:47:31,240 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2025-09-25 12:47:31,240 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2025-09-25 12:47:31,240 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2025-09-25 12:47:31,240 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2025-09-25 12:47:31,240 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2025-09-25 12:47:31,240 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2025-09-25 12:47:31,241 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2025-09-25 12:47:31,487 SOOP Rebuild Index: soops: 465observations 1114 2025-09-25 12:47:36,256 PIPELINE VERSION Version: unknown Common instrument config version: v0.1.5 PROCESSING VERSIONS Prod: Ephemeris File: /home/nicky/STIXCore/stixcore/products/ANC/aspect.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/nicky/STIXCore/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2025-09-25 12:47:36,261 CONFIG [Paths] tm_archive = /data/stix/out/fits_utest/tm/processing fits_archive = /data/stix/out/test/esa_release_test3/ spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12389 parallel_batchsize_l0 = 100 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 log_level = DEBUG log_dir = /data/stix/out/fits_utest/tm/logging error_mail_send = False error_mail_receivers = nicky.hochmuth@ateleris.ch error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch start_with_unprocessed = False last_processed = TM_BatchRequest.PktTmRaw.SOL.0.2023.305.15.33.13.852.bBWz@2023.352.21.00.01.039.1.xml.out [Publish] db_file = /home/nicky/soar_pub/published.sqlite include_levels = LL03 waiting_period = 0d target_dir = /home/nicky/soar_pub/to_soc report_mail_receivers = nicky.hochmuth@ateleris.ch report_mail_send = True same_esa_name_dir = /home/nicky/soar_pub/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/test/esa_release_test3/ ll_waiting_period = 0d supplement_report = /home/nicky/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal log_dir = /data/stix/out/fits_utest/tm/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop [ECC] ecc_path = /opt/stix_det_cal/bin/ 2025-09-25 12:47:36,262 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 41401 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20250924_002.tm'), 'pred', datetime.datetime(2025, 9, 24, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20250924_002.tm'), 'flown', datetime.datetime(2025, 9, 24, 0, 0))] IDBManager: /home/nicky/STIXCore/stixcore/data/idb Versions: [{'label': '2.26.37', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.37', 'version': ['2', '26', '37']}, {'label': '2.26.36', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2025-09-25 12:47:36,846 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20250924_002.tm 2025-09-25 12:47:37,095 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20250924_002.tm 2025-09-25 12:47:37,910 Successfully read ELUT file: /home/nicky/STIXCore/stixcore/config/data/common/elut/elut_table_20221220.csv 2025-09-25 12:47:37,941 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_phvciyjh 2025-09-25 12:47:37,942 Read config from in: /tmp/ecc_context_ecc_cfg_1_phvciyjh/post_ecc.ini 2025-09-25 12:47:39,194 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_phvciyjh/solo_L1_stix-cal-energy_20230130_V01_ecc_in.fits 2025-09-25 13:08:46,264 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230130_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230130_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230130_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230130_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 13:08:46,419 Flush for 'readonly' mode is not supported. 2025-09-25 13:08:52,700 Flush for 'readonly' mode is not supported. 2025-09-25 13:08:52,713 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_phvciyjh'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 13:08:52,806 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/30/CAL/solo_L2_stix-cal-energy_20230130_V02U.fits 2025-09-25 13:08:52,954 Successfully read ELUT file: /home/nicky/STIXCore/stixcore/config/data/common/elut/elut_table_20220918.csv 2025-09-25 13:08:52,988 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4vbe3x1b 2025-09-25 13:08:52,989 Read config from in: /tmp/ecc_context_ecc_cfg_1_4vbe3x1b/post_ecc.ini 2025-09-25 13:08:54,283 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4vbe3x1b/solo_L1_stix-cal-energy_20230110_V01_ecc_in.fits 2025-09-25 13:29:57,688 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230110_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230110_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230110_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230110_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 13:29:57,873 Flush for 'readonly' mode is not supported. 2025-09-25 13:30:04,021 Flush for 'readonly' mode is not supported. 2025-09-25 13:30:04,041 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_4vbe3x1b'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 13:30:04,131 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/10/CAL/solo_L2_stix-cal-energy_20230110_V02U.fits 2025-09-25 13:30:04,291 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jfz872l3 2025-09-25 13:30:04,292 Read config from in: /tmp/ecc_context_ecc_cfg_1_jfz872l3/post_ecc.ini 2025-09-25 13:30:06,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jfz872l3/solo_L1_stix-cal-energy_20230101_V01_ecc_in.fits 2025-09-25 13:51:07,016 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230101_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230101_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230101_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230101_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 13:51:07,169 Flush for 'readonly' mode is not supported. 2025-09-25 13:51:13,114 Flush for 'readonly' mode is not supported. 2025-09-25 13:51:13,125 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_jfz872l3'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 13:51:13,201 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/01/CAL/solo_L2_stix-cal-energy_20230101_V02U.fits 2025-09-25 13:51:13,336 Successfully read ELUT file: /home/nicky/STIXCore/stixcore/config/data/common/elut/elut_table_20221214.csv 2025-09-25 13:51:13,362 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_59b8u_6s 2025-09-25 13:51:13,363 Read config from in: /tmp/ecc_context_ecc_cfg_1_59b8u_6s/post_ecc.ini 2025-09-25 13:51:14,582 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_59b8u_6s/solo_L1_stix-cal-energy_20230124_V03U_ecc_in.fits 2025-09-25 14:12:12,617 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230124_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230124_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230124_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 14:12:12,792 Flush for 'readonly' mode is not supported. 2025-09-25 14:12:18,793 Flush for 'readonly' mode is not supported. 2025-09-25 14:12:18,811 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_59b8u_6s'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 14:12:18,906 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/24/CAL/solo_L2_stix-cal-energy_20230124_V02U.fits 2025-09-25 14:12:19,097 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_exdx_ldm 2025-09-25 14:12:19,097 Read config from in: /tmp/ecc_context_ecc_cfg_1_exdx_ldm/post_ecc.ini 2025-09-25 14:12:20,904 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_exdx_ldm/solo_L1_stix-cal-energy_20230124_V01_ecc_in.fits 2025-09-25 14:34:00,243 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230124_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230124_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230124_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230124_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 14:34:00,399 Flush for 'readonly' mode is not supported. 2025-09-25 14:34:06,467 Flush for 'readonly' mode is not supported. 2025-09-25 14:34:06,479 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_exdx_ldm'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 14:34:06,507 Fits file solo_L2_stix-cal-energy_20230124_V02U.fits exists appending data 2025-09-25 14:34:06,612 No soops found for time: 2023-01-23 19:13:44.689201 - 2023-01-24 21:37:48.855689 2025-09-25 14:34:06,723 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/24/CAL/solo_L2_stix-cal-energy_20230124_V02U.fits 2025-09-25 14:34:06,748 Error processing file /data/stix/out/test/esa_release_test3/L1/2023/01/24/CAL/solo_L1_stix-cal-energy_20230124_V02U.fits Traceback (most recent call last): File "/home/nicky/STIXCore/stixcore/processing/L1toL2.py", line 84, in process_type l1 = Product(file) ^^^^^^^^^^^^^ File "/home/nicky/STIXCore/stixcore/products/product.py", line 210, in __call__ pri_header = fits.getheader(file_path) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/io/fits/convenience.py", line 121, in getheader hdulist, extidx = _getext(filename, mode, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/io/fits/convenience.py", line 1121, in _getext hdulist = fitsopen(filename, mode=mode, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/io/fits/hdu/hdulist.py", line 220, in fitsopen return HDUList.fromfile( ^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/io/fits/hdu/hdulist.py", line 484, in fromfile return cls._readfrom( ^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/io/fits/hdu/hdulist.py", line 1265, in _readfrom raise OSError("Empty or corrupt FITS file") OSError: Empty or corrupt FITS file 2025-09-25 14:34:06,750 Empty or corrupt FITS file 2025-09-25 14:34:06,911 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4bbm8aa4 2025-09-25 14:34:06,911 Read config from in: /tmp/ecc_context_ecc_cfg_1_4bbm8aa4/post_ecc.ini 2025-09-25 14:34:08,142 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4bbm8aa4/solo_L1_stix-cal-energy_20230108_V01_ecc_in.fits 2025-09-25 14:55:18,011 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230108_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230108_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230108_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230108_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 14:55:18,165 Flush for 'readonly' mode is not supported. 2025-09-25 14:55:24,424 Flush for 'readonly' mode is not supported. 2025-09-25 14:55:24,437 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_4bbm8aa4'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 14:55:24,523 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/08/CAL/solo_L2_stix-cal-energy_20230108_V02U.fits 2025-09-25 14:55:24,702 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6vlsjjvw 2025-09-25 14:55:24,702 Read config from in: /tmp/ecc_context_ecc_cfg_1_6vlsjjvw/post_ecc.ini 2025-09-25 14:55:25,971 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6vlsjjvw/solo_L1_stix-cal-energy_20230105_V01_ecc_in.fits 2025-09-25 15:16:00,002 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230105_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230105_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230105_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230105_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 15:16:00,149 Flush for 'readonly' mode is not supported. 2025-09-25 15:16:06,943 Flush for 'readonly' mode is not supported. 2025-09-25 15:16:06,953 ECC result Gain_Prime 0.000 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 15:16:06,954 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_6vlsjjvw'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 15:16:07,028 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/05/CAL/solo_L2_stix-cal-energy_20230105_V02U.fits 2025-09-25 15:16:07,192 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jmrp3nc5 2025-09-25 15:16:07,193 Read config from in: /tmp/ecc_context_ecc_cfg_1_jmrp3nc5/post_ecc.ini 2025-09-25 15:16:08,429 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jmrp3nc5/solo_L1_stix-cal-energy_20230114_V03U_ecc_in.fits 2025-09-25 15:37:13,440 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230114_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230114_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230114_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 15:37:13,584 Flush for 'readonly' mode is not supported. 2025-09-25 15:37:19,604 Flush for 'readonly' mode is not supported. 2025-09-25 15:37:19,616 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_jmrp3nc5'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 15:37:19,695 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/14/CAL/solo_L2_stix-cal-energy_20230114_V02U.fits 2025-09-25 15:37:19,869 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_irp3yj_8 2025-09-25 15:37:19,870 Read config from in: /tmp/ecc_context_ecc_cfg_1_irp3yj_8/post_ecc.ini 2025-09-25 15:37:21,109 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_irp3yj_8/solo_L1_stix-cal-energy_20230114_V02U_ecc_in.fits 2025-09-25 15:58:32,275 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230114_V02U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230114_V02U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230114_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230114_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 15:58:32,438 Flush for 'readonly' mode is not supported. 2025-09-25 15:58:38,922 Flush for 'readonly' mode is not supported. 2025-09-25 15:58:38,933 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_irp3yj_8'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 15:58:38,956 Fits file solo_L2_stix-cal-energy_20230114_V02U.fits exists appending data 2025-09-25 15:58:39,049 No soops found for time: 2023-01-14 01:57:07.241773 - 2023-01-15 01:57:06.391774 2025-09-25 15:58:39,149 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/14/CAL/solo_L2_stix-cal-energy_20230114_V02U.fits 2025-09-25 15:58:39,327 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zwce3q5s 2025-09-25 15:58:39,327 Read config from in: /tmp/ecc_context_ecc_cfg_1_zwce3q5s/post_ecc.ini 2025-09-25 15:58:40,547 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zwce3q5s/solo_L1_stix-cal-energy_20230114_V01_ecc_in.fits 2025-09-25 16:19:47,198 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230114_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230114_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230114_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230114_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 16:19:47,345 Flush for 'readonly' mode is not supported. 2025-09-25 16:19:53,294 Flush for 'readonly' mode is not supported. 2025-09-25 16:19:53,305 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_zwce3q5s'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 16:19:53,329 Fits file solo_L2_stix-cal-energy_20230114_V02U.fits exists appending data 2025-09-25 16:19:53,422 No soops found for time: 2023-01-14 01:57:07.241773 - 2023-01-15 01:57:06.391774 2025-09-25 16:19:53,513 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/14/CAL/solo_L2_stix-cal-energy_20230114_V02U.fits 2025-09-25 16:19:53,686 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b5qvtvid 2025-09-25 16:19:53,686 Read config from in: /tmp/ecc_context_ecc_cfg_1_b5qvtvid/post_ecc.ini 2025-09-25 16:19:54,908 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b5qvtvid/solo_L1_stix-cal-energy_20230107_V01_ecc_in.fits 2025-09-25 16:40:51,146 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230107_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230107_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230107_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230107_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 16:40:51,296 Flush for 'readonly' mode is not supported. 2025-09-25 16:40:57,855 Flush for 'readonly' mode is not supported. 2025-09-25 16:40:57,866 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_b5qvtvid'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 16:40:57,940 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/07/CAL/solo_L2_stix-cal-energy_20230107_V02U.fits 2025-09-25 16:40:58,105 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__e2grlf7 2025-09-25 16:40:58,106 Read config from in: /tmp/ecc_context_ecc_cfg_1__e2grlf7/post_ecc.ini 2025-09-25 16:40:59,363 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__e2grlf7/solo_L1_stix-cal-energy_20230120_V03U_ecc_in.fits 2025-09-25 17:02:30,187 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230120_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230120_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230120_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 17:02:30,328 Flush for 'readonly' mode is not supported. 2025-09-25 17:02:36,279 Flush for 'readonly' mode is not supported. 2025-09-25 17:02:36,289 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1__e2grlf7'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 17:02:36,365 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/20/CAL/solo_L2_stix-cal-energy_20230120_V02U.fits 2025-09-25 17:02:36,538 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qwfjmnpm 2025-09-25 17:02:36,538 Read config from in: /tmp/ecc_context_ecc_cfg_1_qwfjmnpm/post_ecc.ini 2025-09-25 17:02:37,801 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qwfjmnpm/solo_L1_stix-cal-energy_20230120_V01_ecc_in.fits 2025-09-25 17:23:10,989 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230120_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230120_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230120_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230120_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 17:23:11,135 Flush for 'readonly' mode is not supported. 2025-09-25 17:23:17,137 Flush for 'readonly' mode is not supported. 2025-09-25 17:23:17,149 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_qwfjmnpm'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 17:23:17,173 Fits file solo_L2_stix-cal-energy_20230120_V02U.fits exists appending data 2025-09-25 17:23:17,272 No soops found for time: 2023-01-19 17:36:41.085285 - 2023-01-20 20:00:45.241885 2025-09-25 17:23:17,377 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/20/CAL/solo_L2_stix-cal-energy_20230120_V02U.fits 2025-09-25 17:23:17,557 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6tujgz8l 2025-09-25 17:23:17,558 Read config from in: /tmp/ecc_context_ecc_cfg_1_6tujgz8l/post_ecc.ini 2025-09-25 17:23:19,367 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6tujgz8l/solo_L1_stix-cal-energy_20230106_V01_ecc_in.fits 2025-09-25 17:44:06,203 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230106_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230106_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230106_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230106_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 17:44:06,391 Flush for 'readonly' mode is not supported. 2025-09-25 17:44:12,332 Flush for 'readonly' mode is not supported. 2025-09-25 17:44:12,344 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_6tujgz8l'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 17:44:12,420 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/06/CAL/solo_L2_stix-cal-energy_20230106_V02U.fits 2025-09-25 17:44:12,595 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_bcpq_ahx 2025-09-25 17:44:12,596 Read config from in: /tmp/ecc_context_ecc_cfg_1_bcpq_ahx/post_ecc.ini 2025-09-25 17:44:13,858 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_bcpq_ahx/solo_L1_stix-cal-energy_20230103_V01_ecc_in.fits 2025-09-25 18:06:54,043 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230103_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230103_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230103_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230103_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 18:06:54,195 Flush for 'readonly' mode is not supported. 2025-09-25 18:07:00,098 Flush for 'readonly' mode is not supported. 2025-09-25 18:07:00,110 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_bcpq_ahx'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 18:07:00,191 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/03/CAL/solo_L2_stix-cal-energy_20230103_V02U.fits 2025-09-25 18:07:00,423 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4hvh5aez 2025-09-25 18:07:00,424 Read config from in: /tmp/ecc_context_ecc_cfg_1_4hvh5aez/post_ecc.ini 2025-09-25 18:07:01,651 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4hvh5aez/solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits 2025-09-25 18:21:08,320 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 18:21:08,473 Flush for 'readonly' mode is not supported. 2025-09-25 18:22:23,999 Flush for 'readonly' mode is not supported. 2025-09-25 18:22:24,012 ECC result Gain_Prime 1.615 for DET 2 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,013 ECC result Gain_Prime 1.615 for DET 2 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,013 ECC result Gain_Prime 1.615 for DET 4 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,013 ECC result Gain_Prime 1.615 for DET 4 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,013 ECC result Gain_Prime 1.615 for DET 5 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,013 ECC result Gain_Prime 1.615 for DET 5 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,013 ECC result Gain_Prime 1.615 for DET 9 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,013 ECC result Gain_Prime 1.615 for DET 10 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,013 ECC result Gain_Prime 1.615 for DET 12 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,014 ECC result Gain_Prime 1.615 for DET 17 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,014 ECC result Gain_Prime 1.615 for DET 18 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,014 ECC result Gain_Prime 1.615 for DET 18 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,014 ECC result Gain_Prime 1.615 for DET 22 PIX 10 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,014 ECC result Gain_Prime 1.615 for DET 27 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,014 ECC result Gain_Prime 1.615 for DET 28 PIX 9 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,014 ECC result Gain_Prime 1.615 for DET 28 PIX 11 exceeds Max_Gain 1.4, but not in ignore list 2025-09-25 18:22:24,014 ECC result Gain_Prime 0.000 for DET 1 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 1 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 2 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 3 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 3 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 3 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 3 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 3 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 4 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,015 ECC result Gain_Prime 0.000 for DET 4 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 4 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 5 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 5 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 5 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 5 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 6 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 6 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 6 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,016 ECC result Gain_Prime 0.000 for DET 6 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 7 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 7 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 8 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 8 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 8 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 9 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 9 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,017 ECC result Gain_Prime 0.000 for DET 10 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 10 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 10 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 11 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 11 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 11 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 12 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 12 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 13 PIX 4 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,018 ECC result Gain_Prime 0.000 for DET 14 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 14 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 14 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 14 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 14 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 15 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 15 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 16 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 16 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,019 ECC result Gain_Prime 0.000 for DET 17 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 17 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 17 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 18 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 18 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 18 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 19 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 19 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 19 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,020 ECC result Gain_Prime 0.000 for DET 19 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 20 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 20 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 21 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 21 PIX 1 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 21 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 21 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 21 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 22 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 22 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,021 ECC result Gain_Prime 0.000 for DET 23 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 23 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 24 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 24 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 25 PIX 6 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 25 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 26 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 26 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 26 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 26 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 26 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,022 ECC result Gain_Prime 0.000 for DET 28 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 28 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 29 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 29 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 30 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 30 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 31 PIX 2 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 31 PIX 5 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 31 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,023 ECC result Gain_Prime 0.000 for DET 31 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,024 ECC result Gain_Prime 0.000 for DET 31 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,024 ECC result Gain_Prime 0.000 for DET 32 PIX 0 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,024 ECC result Gain_Prime 0.000 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,024 ECC result Gain_Prime 0.000 for DET 32 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-25 18:22:24,025 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_4hvh5aez'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 18:22:24,057 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ult1b28z 2025-09-25 18:22:24,057 Read config from in: /tmp/ecc_context_ecc_cfg_1_ult1b28z/post_ecc.ini 2025-09-25 18:22:25,306 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ult1b28z/solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits 2025-09-25 18:42:40,970 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230131_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 18:42:41,123 Flush for 'readonly' mode is not supported. 2025-09-25 18:42:47,619 Flush for 'readonly' mode is not supported. 2025-09-25 18:42:47,632 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_ult1b28z'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 18:42:47,633 Error processing file /data/stix/out/test/esa_release_test3/L1/2023/01/31/CAL/solo_L1_stix-cal-energy_20230131_V01.fits Traceback (most recent call last): File "/home/nicky/STIXCore/stixcore/processing/L1toL2.py", line 91, in process_type for l2 in tmp.from_level1(l1, parent=complete_file_name, idlprocessor=idlprocessor): ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py", line 363, in from_level1 l2.data.add_column(Column(name='e_edges_actual', data=e_actual_list, File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/table/table.py", line 2446, in add_column raise ValueError("Inconsistent data column lengths") ValueError: Inconsistent data column lengths 2025-09-25 18:42:47,647 Inconsistent data column lengths 2025-09-25 18:42:48,366 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_f_0a0r3_ 2025-09-25 18:42:48,366 Read config from in: /tmp/ecc_context_ecc_cfg_1_f_0a0r3_/post_ecc.ini 2025-09-25 18:42:49,657 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_f_0a0r3_/solo_L1_stix-cal-energy_20230123_V02U_ecc_in.fits 2025-09-25 19:03:38,361 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230123_V02U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230123_V02U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230123_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230123_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 19:03:38,551 Flush for 'readonly' mode is not supported. 2025-09-25 19:03:44,445 Flush for 'readonly' mode is not supported. 2025-09-25 19:03:44,456 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_f_0a0r3_'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 19:03:44,529 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/23/CAL/solo_L2_stix-cal-energy_20230123_V02U.fits 2025-09-25 19:03:44,702 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5m7_ocjy 2025-09-25 19:03:44,702 Read config from in: /tmp/ecc_context_ecc_cfg_1_5m7_ocjy/post_ecc.ini 2025-09-25 19:03:45,916 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5m7_ocjy/solo_L1_stix-cal-energy_20230123_V01_ecc_in.fits 2025-09-25 19:24:35,036 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230123_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230123_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230123_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230123_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 19:24:35,177 Flush for 'readonly' mode is not supported. 2025-09-25 19:24:41,131 Flush for 'readonly' mode is not supported. 2025-09-25 19:24:41,142 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_5m7_ocjy'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 19:24:41,164 Fits file solo_L2_stix-cal-energy_20230123_V02U.fits exists appending data 2025-09-25 19:24:41,257 No soops found for time: 2023-01-22 17:36:54.529463 - 2023-01-23 21:37:44.704169 2025-09-25 19:24:41,355 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/23/CAL/solo_L2_stix-cal-energy_20230123_V02U.fits 2025-09-25 19:24:41,517 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iygb1m15 2025-09-25 19:24:41,517 Read config from in: /tmp/ecc_context_ecc_cfg_1_iygb1m15/post_ecc.ini 2025-09-25 19:24:43,286 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iygb1m15/solo_L1_stix-cal-energy_20230123_V03U_ecc_in.fits 2025-09-25 19:45:47,082 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230123_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230123_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230123_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 19:45:47,226 Flush for 'readonly' mode is not supported. 2025-09-25 19:45:53,150 Flush for 'readonly' mode is not supported. 2025-09-25 19:45:53,161 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_iygb1m15'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 19:45:53,184 Fits file solo_L2_stix-cal-energy_20230123_V02U.fits exists appending data 2025-09-25 19:45:53,282 No soops found for time: 2023-01-22 17:36:54.529463 - 2023-01-23 21:37:44.704169 2025-09-25 19:45:53,373 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/23/CAL/solo_L2_stix-cal-energy_20230123_V02U.fits 2025-09-25 19:45:53,534 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7t94i8ww 2025-09-25 19:45:53,535 Read config from in: /tmp/ecc_context_ecc_cfg_1_7t94i8ww/post_ecc.ini 2025-09-25 19:45:54,758 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7t94i8ww/solo_L1_stix-cal-energy_20230116_V02U_ecc_in.fits 2025-09-25 20:06:58,694 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230116_V02U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230116_V02U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230116_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230116_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 20:06:58,837 Flush for 'readonly' mode is not supported. 2025-09-25 20:07:05,196 Flush for 'readonly' mode is not supported. 2025-09-25 20:07:05,208 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_7t94i8ww'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 20:07:05,287 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/16/CAL/solo_L2_stix-cal-energy_20230116_V02U.fits 2025-09-25 20:07:05,471 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oeiqxels 2025-09-25 20:07:05,472 Read config from in: /tmp/ecc_context_ecc_cfg_1_oeiqxels/post_ecc.ini 2025-09-25 20:07:06,774 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oeiqxels/solo_L1_stix-cal-energy_20230116_V01_ecc_in.fits 2025-09-25 20:28:17,604 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230116_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230116_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230116_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230116_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 20:28:18,272 Flush for 'readonly' mode is not supported. 2025-09-25 20:28:24,328 Flush for 'readonly' mode is not supported. 2025-09-25 20:28:24,338 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_oeiqxels'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 20:28:24,360 Fits file solo_L2_stix-cal-energy_20230116_V02U.fits exists appending data 2025-09-25 20:28:24,454 No soops found for time: 2023-01-16 01:57:16.541794 - 2023-01-16 10:50:02.597292 2025-09-25 20:28:24,553 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/16/CAL/solo_L2_stix-cal-energy_20230116_V02U.fits 2025-09-25 20:28:24,724 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jwl51x1x 2025-09-25 20:28:24,725 Read config from in: /tmp/ecc_context_ecc_cfg_1_jwl51x1x/post_ecc.ini 2025-09-25 20:28:25,953 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jwl51x1x/solo_L1_stix-cal-energy_20230116_V03U_ecc_in.fits 2025-09-25 20:49:30,872 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230116_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230116_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230116_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 20:49:31,011 Flush for 'readonly' mode is not supported. 2025-09-25 20:49:37,284 Flush for 'readonly' mode is not supported. 2025-09-25 20:49:37,296 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_jwl51x1x'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 20:49:37,320 Fits file solo_L2_stix-cal-energy_20230116_V02U.fits exists appending data 2025-09-25 20:49:37,422 No soops found for time: 2023-01-16 01:57:16.541794 - 2023-01-16 10:50:02.597292 2025-09-25 20:49:37,515 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/16/CAL/solo_L2_stix-cal-energy_20230116_V02U.fits 2025-09-25 20:49:37,688 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fea7bgp2 2025-09-25 20:49:37,689 Read config from in: /tmp/ecc_context_ecc_cfg_1_fea7bgp2/post_ecc.ini 2025-09-25 20:49:38,932 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fea7bgp2/solo_L1_stix-cal-energy_20230121_V03U_ecc_in.fits 2025-09-25 21:10:09,161 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230121_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230121_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230121_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 21:10:09,308 Flush for 'readonly' mode is not supported. 2025-09-25 21:10:15,832 Flush for 'readonly' mode is not supported. 2025-09-25 21:10:15,843 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_fea7bgp2'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 21:10:15,920 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/21/CAL/solo_L2_stix-cal-energy_20230121_V02U.fits 2025-09-25 21:10:16,096 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_069yido3 2025-09-25 21:10:16,097 Read config from in: /tmp/ecc_context_ecc_cfg_1_069yido3/post_ecc.ini 2025-09-25 21:10:17,338 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_069yido3/solo_L1_stix-cal-energy_20230121_V01_ecc_in.fits 2025-09-25 21:31:33,966 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230121_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230121_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230121_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230121_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 21:31:34,105 Flush for 'readonly' mode is not supported. 2025-09-25 21:31:40,005 Flush for 'readonly' mode is not supported. 2025-09-25 21:31:40,016 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_069yido3'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 21:31:40,039 Fits file solo_L2_stix-cal-energy_20230121_V02U.fits exists appending data 2025-09-25 21:31:40,131 No soops found for time: 2023-01-20 17:36:45.227315 - 2023-01-21 20:00:49.394748 2025-09-25 21:31:40,231 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/21/CAL/solo_L2_stix-cal-energy_20230121_V02U.fits 2025-09-25 21:31:40,394 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1agts21d 2025-09-25 21:31:40,395 Read config from in: /tmp/ecc_context_ecc_cfg_1_1agts21d/post_ecc.ini 2025-09-25 21:31:41,623 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1agts21d/solo_L1_stix-cal-energy_20230121_V02U_ecc_in.fits 2025-09-25 21:52:20,380 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230121_V02U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230121_V02U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230121_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230121_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 21:52:20,519 Flush for 'readonly' mode is not supported. 2025-09-25 21:52:26,908 Flush for 'readonly' mode is not supported. 2025-09-25 21:52:26,919 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_1agts21d'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 21:52:26,941 Fits file solo_L2_stix-cal-energy_20230121_V02U.fits exists appending data 2025-09-25 21:52:27,037 No soops found for time: 2023-01-20 17:36:45.227315 - 2023-01-21 20:00:49.394748 2025-09-25 21:52:27,126 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/21/CAL/solo_L2_stix-cal-energy_20230121_V02U.fits 2025-09-25 21:52:27,298 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8g0ohs9u 2025-09-25 21:52:27,298 Read config from in: /tmp/ecc_context_ecc_cfg_1_8g0ohs9u/post_ecc.ini 2025-09-25 21:52:28,522 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8g0ohs9u/solo_L1_stix-cal-energy_20230112_V01_ecc_in.fits 2025-09-25 22:13:23,455 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230112_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230112_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230112_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230112_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 22:13:23,593 Flush for 'readonly' mode is not supported. 2025-09-25 22:13:29,550 Flush for 'readonly' mode is not supported. 2025-09-25 22:13:29,561 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_8g0ohs9u'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 22:13:29,635 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/12/CAL/solo_L2_stix-cal-energy_20230112_V02U.fits 2025-09-25 22:13:29,815 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_v4rvmr8b 2025-09-25 22:13:29,816 Read config from in: /tmp/ecc_context_ecc_cfg_1_v4rvmr8b/post_ecc.ini 2025-09-25 22:13:31,048 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_v4rvmr8b/solo_L1_stix-cal-energy_20230127_V01_ecc_in.fits 2025-09-25 22:34:50,099 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230127_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230127_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230127_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230127_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 22:34:50,239 Flush for 'readonly' mode is not supported. 2025-09-25 22:34:56,083 Flush for 'readonly' mode is not supported. 2025-09-25 22:34:56,093 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_v4rvmr8b'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 22:34:56,166 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/27/CAL/solo_L2_stix-cal-energy_20230127_V02U.fits 2025-09-25 22:34:56,336 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_dcsrlaqj 2025-09-25 22:34:56,337 Read config from in: /tmp/ecc_context_ecc_cfg_1_dcsrlaqj/post_ecc.ini 2025-09-25 22:34:58,085 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_dcsrlaqj/solo_L1_stix-cal-energy_20230111_V01_ecc_in.fits 2025-09-25 22:55:52,486 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230111_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230111_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230111_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230111_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 22:55:52,626 Flush for 'readonly' mode is not supported. 2025-09-25 22:55:58,623 Flush for 'readonly' mode is not supported. 2025-09-25 22:55:58,634 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_dcsrlaqj'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 22:55:58,708 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/11/CAL/solo_L2_stix-cal-energy_20230111_V02U.fits 2025-09-25 22:55:58,881 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_id1olqcs 2025-09-25 22:55:58,882 Read config from in: /tmp/ecc_context_ecc_cfg_1_id1olqcs/post_ecc.ini 2025-09-25 22:56:00,104 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_id1olqcs/solo_L1_stix-cal-energy_20230126_V01_ecc_in.fits 2025-09-25 23:16:55,716 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230126_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230126_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230126_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230126_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 23:16:55,855 Flush for 'readonly' mode is not supported. 2025-09-25 23:17:01,696 Flush for 'readonly' mode is not supported. 2025-09-25 23:17:01,707 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_id1olqcs'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 23:17:01,781 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/26/CAL/solo_L2_stix-cal-energy_20230126_V02U.fits 2025-09-25 23:17:01,955 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yh8zch9a 2025-09-25 23:17:01,956 Read config from in: /tmp/ecc_context_ecc_cfg_1_yh8zch9a/post_ecc.ini 2025-09-25 23:17:03,187 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yh8zch9a/solo_L1_stix-cal-energy_20230119_V01_ecc_in.fits 2025-09-25 23:38:26,246 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230119_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230119_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230119_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230119_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 23:38:26,387 Flush for 'readonly' mode is not supported. 2025-09-25 23:38:32,762 Flush for 'readonly' mode is not supported. 2025-09-25 23:38:32,772 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_yh8zch9a'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 23:38:32,845 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/19/CAL/solo_L2_stix-cal-energy_20230119_V02U.fits 2025-09-25 23:38:33,004 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_2g887yw5 2025-09-25 23:38:33,005 Read config from in: /tmp/ecc_context_ecc_cfg_1_2g887yw5/post_ecc.ini 2025-09-25 23:38:34,244 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_2g887yw5/solo_L1_stix-cal-energy_20230122_V03U_ecc_in.fits 2025-09-25 23:59:36,483 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230122_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230122_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230122_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-25 23:59:36,686 Flush for 'readonly' mode is not supported. 2025-09-25 23:59:42,597 Flush for 'readonly' mode is not supported. 2025-09-25 23:59:42,609 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_2g887yw5'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-25 23:59:42,686 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/22/CAL/solo_L2_stix-cal-energy_20230122_V02U.fits 2025-09-25 23:59:42,861 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_4ivjts1j 2025-09-25 23:59:42,861 Read config from in: /tmp/ecc_context_ecc_cfg_1_4ivjts1j/post_ecc.ini 2025-09-25 23:59:44,092 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_4ivjts1j/solo_L1_stix-cal-energy_20230122_V01_ecc_in.fits 2025-09-26 00:21:25,133 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230122_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230122_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230122_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230122_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 00:21:25,276 Flush for 'readonly' mode is not supported. 2025-09-26 00:21:31,784 Flush for 'readonly' mode is not supported. 2025-09-26 00:21:31,794 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_4ivjts1j'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 00:21:31,815 Fits file solo_L2_stix-cal-energy_20230122_V02U.fits exists appending data 2025-09-26 00:21:31,908 No soops found for time: 2023-01-21 17:36:49.379780 - 2023-01-22 20:04:56.544849 2025-09-26 00:21:32,004 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/22/CAL/solo_L2_stix-cal-energy_20230122_V02U.fits 2025-09-26 00:21:32,160 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_egsi1w6j 2025-09-26 00:21:32,161 Read config from in: /tmp/ecc_context_ecc_cfg_1_egsi1w6j/post_ecc.ini 2025-09-26 00:21:33,398 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_egsi1w6j/solo_L1_stix-cal-energy_20230122_V02U_ecc_in.fits 2025-09-26 00:42:45,343 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230122_V02U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230122_V02U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230122_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230122_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 00:42:45,486 Flush for 'readonly' mode is not supported. 2025-09-26 00:42:51,406 Flush for 'readonly' mode is not supported. 2025-09-26 00:42:51,416 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_egsi1w6j'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 00:42:51,440 Fits file solo_L2_stix-cal-energy_20230122_V02U.fits exists appending data 2025-09-26 00:42:51,535 No soops found for time: 2023-01-21 17:36:49.379780 - 2023-01-22 20:04:56.544849 2025-09-26 00:42:51,625 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/22/CAL/solo_L2_stix-cal-energy_20230122_V02U.fits 2025-09-26 00:42:51,802 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_29s71paq 2025-09-26 00:42:51,803 Read config from in: /tmp/ecc_context_ecc_cfg_1_29s71paq/post_ecc.ini 2025-09-26 00:42:53,022 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_29s71paq/solo_L1_stix-cal-energy_20230125_V01_ecc_in.fits 2025-09-26 01:04:03,243 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230125_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230125_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230125_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230125_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 01:04:03,384 Flush for 'readonly' mode is not supported. 2025-09-26 01:04:09,442 Flush for 'readonly' mode is not supported. 2025-09-26 01:04:09,453 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_29s71paq'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 01:04:09,530 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/25/CAL/solo_L2_stix-cal-energy_20230125_V02U.fits 2025-09-26 01:04:09,700 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_hkne16jj 2025-09-26 01:04:09,701 Read config from in: /tmp/ecc_context_ecc_cfg_1_hkne16jj/post_ecc.ini 2025-09-26 01:04:11,486 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_hkne16jj/solo_L1_stix-cal-energy_20230125_V02U_ecc_in.fits 2025-09-26 01:25:14,516 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230125_V02U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230125_V02U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230125_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230125_V02U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 01:25:14,656 Flush for 'readonly' mode is not supported. 2025-09-26 01:25:20,485 Flush for 'readonly' mode is not supported. 2025-09-26 01:25:20,495 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_hkne16jj'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 01:25:20,519 Fits file solo_L2_stix-cal-energy_20230125_V02U.fits exists appending data 2025-09-26 01:25:20,612 No soops found for time: 2023-01-24 19:13:49.840672 - 2023-01-25 21:37:54.005887 2025-09-26 01:25:20,706 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/25/CAL/solo_L2_stix-cal-energy_20230125_V02U.fits 2025-09-26 01:25:20,865 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1050kpu9 2025-09-26 01:25:20,865 Read config from in: /tmp/ecc_context_ecc_cfg_1_1050kpu9/post_ecc.ini 2025-09-26 01:25:22,084 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1050kpu9/solo_L1_stix-cal-energy_20230125_V03U_ecc_in.fits 2025-09-26 01:46:29,663 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230125_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230125_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230125_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 01:46:29,812 Flush for 'readonly' mode is not supported. 2025-09-26 01:46:35,686 Flush for 'readonly' mode is not supported. 2025-09-26 01:46:35,697 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_1050kpu9'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 01:46:35,721 Fits file solo_L2_stix-cal-energy_20230125_V02U.fits exists appending data 2025-09-26 01:46:35,819 No soops found for time: 2023-01-24 19:13:49.840672 - 2023-01-25 21:37:54.005887 2025-09-26 01:46:35,911 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/25/CAL/solo_L2_stix-cal-energy_20230125_V02U.fits 2025-09-26 01:46:36,091 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__xa5pxg4 2025-09-26 01:46:36,092 Read config from in: /tmp/ecc_context_ecc_cfg_1__xa5pxg4/post_ecc.ini 2025-09-26 01:46:37,797 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__xa5pxg4/solo_L1_stix-cal-energy_20230128_V01_ecc_in.fits 2025-09-26 02:07:45,305 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230128_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230128_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230128_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230128_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 02:07:45,448 Flush for 'readonly' mode is not supported. 2025-09-26 02:07:51,306 Flush for 'readonly' mode is not supported. 2025-09-26 02:07:51,318 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1__xa5pxg4'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 02:07:51,391 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/28/CAL/solo_L2_stix-cal-energy_20230128_V02U.fits 2025-09-26 02:07:51,572 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_a7d7w2pf 2025-09-26 02:07:51,572 Read config from in: /tmp/ecc_context_ecc_cfg_1_a7d7w2pf/post_ecc.ini 2025-09-26 02:07:52,811 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_a7d7w2pf/solo_L1_stix-cal-energy_20230109_V01_ecc_in.fits 2025-09-26 02:28:54,386 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230109_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230109_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230109_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230109_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 02:28:54,529 Flush for 'readonly' mode is not supported. 2025-09-26 02:29:00,661 Flush for 'readonly' mode is not supported. 2025-09-26 02:29:00,672 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_a7d7w2pf'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 02:29:00,749 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/09/CAL/solo_L2_stix-cal-energy_20230109_V02U.fits 2025-09-26 02:29:00,928 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vp4l8na8 2025-09-26 02:29:00,928 Read config from in: /tmp/ecc_context_ecc_cfg_1_vp4l8na8/post_ecc.ini 2025-09-26 02:29:02,220 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vp4l8na8/solo_L1_stix-cal-energy_20230129_V01_ecc_in.fits 2025-09-26 02:49:44,623 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230129_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230129_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230129_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230129_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 02:49:44,761 Flush for 'readonly' mode is not supported. 2025-09-26 02:49:51,226 Flush for 'readonly' mode is not supported. 2025-09-26 02:49:51,236 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_vp4l8na8'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 02:49:51,307 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/29/CAL/solo_L2_stix-cal-energy_20230129_V02U.fits 2025-09-26 02:49:51,478 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xazofcsv 2025-09-26 02:49:51,478 Read config from in: /tmp/ecc_context_ecc_cfg_1_xazofcsv/post_ecc.ini 2025-09-26 02:49:52,704 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xazofcsv/solo_L1_stix-cal-energy_20230102_V01_ecc_in.fits 2025-09-26 03:11:17,594 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230102_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230102_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230102_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230102_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 03:11:17,734 Flush for 'readonly' mode is not supported. 2025-09-26 03:11:23,588 Flush for 'readonly' mode is not supported. 2025-09-26 03:11:23,599 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_xazofcsv'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 03:11:23,673 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/02/CAL/solo_L2_stix-cal-energy_20230102_V02U.fits 2025-09-26 03:11:23,846 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_62fzri_y 2025-09-26 03:11:23,847 Read config from in: /tmp/ecc_context_ecc_cfg_1_62fzri_y/post_ecc.ini 2025-09-26 03:11:25,083 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_62fzri_y/solo_L1_stix-cal-energy_20230113_V01_ecc_in.fits 2025-09-26 03:32:39,935 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230113_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230113_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230113_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230113_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 03:32:40,076 Flush for 'readonly' mode is not supported. 2025-09-26 03:32:46,457 Flush for 'readonly' mode is not supported. 2025-09-26 03:32:46,467 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_62fzri_y'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 03:32:46,540 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/13/CAL/solo_L2_stix-cal-energy_20230113_V02U.fits 2025-09-26 03:32:46,702 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_nfebuwgn 2025-09-26 03:32:46,702 Read config from in: /tmp/ecc_context_ecc_cfg_1_nfebuwgn/post_ecc.ini 2025-09-26 03:32:47,938 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_nfebuwgn/solo_L1_stix-cal-energy_20230115_V03U_ecc_in.fits 2025-09-26 03:53:45,839 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230115_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230115_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230115_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 03:53:45,979 Flush for 'readonly' mode is not supported. 2025-09-26 03:53:51,805 Flush for 'readonly' mode is not supported. 2025-09-26 03:53:51,816 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_nfebuwgn'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 03:53:51,889 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/15/CAL/solo_L2_stix-cal-energy_20230115_V02U.fits 2025-09-26 03:53:52,069 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_oayph7zl 2025-09-26 03:53:52,069 Read config from in: /tmp/ecc_context_ecc_cfg_1_oayph7zl/post_ecc.ini 2025-09-26 03:53:53,286 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_oayph7zl/solo_L1_stix-cal-energy_20230115_V01_ecc_in.fits 2025-09-26 04:14:54,519 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230115_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230115_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230115_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230115_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 04:14:54,660 Flush for 'readonly' mode is not supported. 2025-09-26 04:15:01,089 Flush for 'readonly' mode is not supported. 2025-09-26 04:15:01,100 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_oayph7zl'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 04:15:01,122 Fits file solo_L2_stix-cal-energy_20230115_V02U.fits exists appending data 2025-09-26 04:15:01,216 No soops found for time: 2023-01-15 01:57:12.391785 - 2023-01-16 01:57:12.541788 2025-09-26 04:15:01,322 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/15/CAL/solo_L2_stix-cal-energy_20230115_V02U.fits 2025-09-26 04:15:01,548 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_b6zagya1 2025-09-26 04:15:01,549 Read config from in: /tmp/ecc_context_ecc_cfg_1_b6zagya1/post_ecc.ini 2025-09-26 04:15:02,775 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_b6zagya1/solo_L1_stix-cal-energy_20230104_V01_ecc_in.fits 2025-09-26 04:36:22,975 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230104_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230104_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230104_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230104_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 04:36:23,113 Flush for 'readonly' mode is not supported. 2025-09-26 04:36:28,948 Flush for 'readonly' mode is not supported. 2025-09-26 04:36:28,958 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_b6zagya1'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 04:36:29,031 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/01/04/CAL/solo_L2_stix-cal-energy_20230104_V02U.fits 2025-09-26 04:36:29,204 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_jvyygcw1 2025-09-26 04:36:29,205 Read config from in: /tmp/ecc_context_ecc_cfg_1_jvyygcw1/post_ecc.ini 2025-09-26 04:36:30,428 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_jvyygcw1/solo_L1_stix-cal-energy_20230301_V01_ecc_in.fits 2025-09-26 04:57:41,975 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230301_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230301_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230301_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230301_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 04:57:42,116 Flush for 'readonly' mode is not supported. 2025-09-26 04:57:47,984 Flush for 'readonly' mode is not supported. 2025-09-26 04:57:47,995 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_jvyygcw1'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 04:57:48,071 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/03/01/CAL/solo_L2_stix-cal-energy_20230301_V02U.fits 2025-09-26 04:57:48,253 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9s_ik9mg 2025-09-26 04:57:48,254 Read config from in: /tmp/ecc_context_ecc_cfg_1_9s_ik9mg/post_ecc.ini 2025-09-26 04:57:50,022 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9s_ik9mg/solo_L1_stix-cal-energy_20230303_V01_ecc_in.fits 2025-09-26 05:19:17,160 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230303_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230303_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230303_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230303_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 05:19:17,301 Flush for 'readonly' mode is not supported. 2025-09-26 05:19:23,105 Flush for 'readonly' mode is not supported. 2025-09-26 05:19:23,116 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_9s_ik9mg'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 05:19:23,190 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/03/03/CAL/solo_L2_stix-cal-energy_20230303_V02U.fits 2025-09-26 05:19:23,364 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6fvqxsef 2025-09-26 05:19:23,365 Read config from in: /tmp/ecc_context_ecc_cfg_1_6fvqxsef/post_ecc.ini 2025-09-26 05:19:24,592 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6fvqxsef/solo_L1_stix-cal-energy_20230302_V01_ecc_in.fits 2025-09-26 05:40:56,497 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230302_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230302_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230302_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230302_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 05:40:56,638 Flush for 'readonly' mode is not supported. 2025-09-26 05:41:02,535 Flush for 'readonly' mode is not supported. 2025-09-26 05:41:02,545 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_6fvqxsef'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 05:41:02,619 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/03/02/CAL/solo_L2_stix-cal-energy_20230302_V02U.fits 2025-09-26 05:41:02,788 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_vp6y5hfh 2025-09-26 05:41:02,789 Read config from in: /tmp/ecc_context_ecc_cfg_1_vp6y5hfh/post_ecc.ini 2025-09-26 05:41:04,567 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_vp6y5hfh/solo_L1_stix-cal-energy_20230304_V01_ecc_in.fits 2025-09-26 06:02:41,195 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230304_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230304_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230304_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230304_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 06:02:41,343 Flush for 'readonly' mode is not supported. 2025-09-26 06:02:47,211 Flush for 'readonly' mode is not supported. 2025-09-26 06:02:47,222 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_vp6y5hfh'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 06:02:47,296 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/03/04/CAL/solo_L2_stix-cal-energy_20230304_V02U.fits 2025-09-26 06:02:47,471 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_fnx30iuh 2025-09-26 06:02:47,471 Read config from in: /tmp/ecc_context_ecc_cfg_1_fnx30iuh/post_ecc.ini 2025-09-26 06:02:48,703 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_fnx30iuh/solo_L1_stix-cal-energy_20230210_V01_ecc_in.fits 2025-09-26 06:24:20,932 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230210_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230210_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230210_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230210_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 06:24:21,077 Flush for 'readonly' mode is not supported. 2025-09-26 06:24:26,936 Flush for 'readonly' mode is not supported. 2025-09-26 06:24:26,947 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_fnx30iuh'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 06:24:27,024 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/10/CAL/solo_L2_stix-cal-energy_20230210_V02U.fits 2025-09-26 06:24:27,199 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_t9p4ziq8 2025-09-26 06:24:27,200 Read config from in: /tmp/ecc_context_ecc_cfg_1_t9p4ziq8/post_ecc.ini 2025-09-26 06:24:28,424 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_t9p4ziq8/solo_L1_stix-cal-energy_20230201_V01_ecc_in.fits 2025-09-26 06:45:45,676 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230201_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230201_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230201_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230201_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 06:45:45,884 Flush for 'readonly' mode is not supported. 2025-09-26 06:45:52,228 Flush for 'readonly' mode is not supported. 2025-09-26 06:45:52,237 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_t9p4ziq8'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 06:45:52,309 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/01/CAL/solo_L2_stix-cal-energy_20230201_V02U.fits 2025-09-26 06:45:52,479 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__o2gfl3j 2025-09-26 06:45:52,480 Read config from in: /tmp/ecc_context_ecc_cfg_1__o2gfl3j/post_ecc.ini 2025-09-26 06:45:53,702 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__o2gfl3j/solo_L1_stix-cal-energy_20230224_V01_ecc_in.fits 2025-09-26 07:07:52,122 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230224_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230224_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230224_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230224_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 07:07:52,272 Flush for 'readonly' mode is not supported. 2025-09-26 07:07:58,142 Flush for 'readonly' mode is not supported. 2025-09-26 07:07:58,153 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1__o2gfl3j'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 07:07:58,228 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/24/CAL/solo_L2_stix-cal-energy_20230224_V02U.fits 2025-09-26 07:07:58,401 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_54u2pwnx 2025-09-26 07:07:58,402 Read config from in: /tmp/ecc_context_ecc_cfg_1_54u2pwnx/post_ecc.ini 2025-09-26 07:07:59,627 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_54u2pwnx/solo_L1_stix-cal-energy_20230208_V01_ecc_in.fits 2025-09-26 07:29:08,779 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230208_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230208_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230208_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230208_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 07:29:08,920 Flush for 'readonly' mode is not supported. 2025-09-26 07:29:15,311 Flush for 'readonly' mode is not supported. 2025-09-26 07:29:15,323 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_54u2pwnx'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 07:29:15,395 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/08/CAL/solo_L2_stix-cal-energy_20230208_V02U.fits 2025-09-26 07:29:15,572 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_iu26qkiq 2025-09-26 07:29:15,572 Read config from in: /tmp/ecc_context_ecc_cfg_1_iu26qkiq/post_ecc.ini 2025-09-26 07:29:16,789 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_iu26qkiq/solo_L1_stix-cal-energy_20230205_V01_ecc_in.fits 2025-09-26 07:50:35,152 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230205_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230205_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230205_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230205_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 07:50:35,290 Flush for 'readonly' mode is not supported. 2025-09-26 07:50:41,138 Flush for 'readonly' mode is not supported. 2025-09-26 07:50:41,149 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_iu26qkiq'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 07:50:41,223 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/05/CAL/solo_L2_stix-cal-energy_20230205_V02U.fits 2025-09-26 07:50:41,400 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_infaxwe_ 2025-09-26 07:50:41,400 Read config from in: /tmp/ecc_context_ecc_cfg_1_infaxwe_/post_ecc.ini 2025-09-26 07:50:42,628 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_infaxwe_/solo_L1_stix-cal-energy_20230214_V01_ecc_in.fits 2025-09-26 08:12:06,929 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230214_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230214_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230214_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230214_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 08:12:07,075 Flush for 'readonly' mode is not supported. 2025-09-26 08:12:13,153 Flush for 'readonly' mode is not supported. 2025-09-26 08:12:13,165 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_infaxwe_'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 08:12:13,246 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/14/CAL/solo_L2_stix-cal-energy_20230214_V02U.fits 2025-09-26 08:12:13,917 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e_83_j_r 2025-09-26 08:12:13,918 Read config from in: /tmp/ecc_context_ecc_cfg_1_e_83_j_r/post_ecc.ini 2025-09-26 08:12:15,169 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e_83_j_r/solo_L1_stix-cal-energy_20230207_V01_ecc_in.fits 2025-09-26 08:32:34,411 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230207_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230207_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230207_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230207_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 08:32:34,556 Flush for 'readonly' mode is not supported. 2025-09-26 08:32:40,514 Flush for 'readonly' mode is not supported. 2025-09-26 08:32:40,524 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_e_83_j_r'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 08:32:40,596 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/07/CAL/solo_L2_stix-cal-energy_20230207_V02U.fits 2025-09-26 08:32:40,766 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_0gsz7yeb 2025-09-26 08:32:40,767 Read config from in: /tmp/ecc_context_ecc_cfg_1_0gsz7yeb/post_ecc.ini 2025-09-26 08:32:41,989 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_0gsz7yeb/solo_L1_stix-cal-energy_20230220_V01_ecc_in.fits 2025-09-26 08:54:07,212 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230220_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230220_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230220_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230220_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 08:54:07,356 Flush for 'readonly' mode is not supported. 2025-09-26 08:54:13,160 Flush for 'readonly' mode is not supported. 2025-09-26 08:54:13,171 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_0gsz7yeb'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 08:54:13,244 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/20/CAL/solo_L2_stix-cal-energy_20230220_V02U.fits 2025-09-26 08:54:13,456 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ptlez_ht 2025-09-26 08:54:13,456 Read config from in: /tmp/ecc_context_ecc_cfg_1_ptlez_ht/post_ecc.ini 2025-09-26 08:54:15,174 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ptlez_ht/solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits 2025-09-26 09:19:23,417 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 09:19:23,556 Flush for 'readonly' mode is not supported. 2025-09-26 09:19:31,164 Flush for 'readonly' mode is not supported. 2025-09-26 09:19:31,174 ECC result Gain_Prime 1.616 for DET 32 PIX 8 exceeds Max_Gain 1.4, but not in ignore list 2025-09-26 09:19:31,174 ECC result Gain_Prime 0.000 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:19:31,174 ECC result Gain_Prime 0.000 for DET 2 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:19:31,175 ECC result Gain_Prime 0.000 for DET 6 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:19:31,175 ECC result Gain_Prime 0.000 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:19:31,175 ECC result Gain_Prime 0.000 for DET 17 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:19:31,175 ECC result Gain_Prime 0.000 for DET 20 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:19:31,176 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_ptlez_ht'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 09:19:31,208 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8r47vohw 2025-09-26 09:19:31,209 Read config from in: /tmp/ecc_context_ecc_cfg_1_8r47vohw/post_ecc.ini 2025-09-26 09:19:32,436 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8r47vohw/solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits 2025-09-26 09:39:13,961 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230206_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 09:39:14,099 Flush for 'readonly' mode is not supported. 2025-09-26 09:39:22,524 Flush for 'readonly' mode is not supported. 2025-09-26 09:39:22,535 ECC result Gain_Prime 0.000 for DET 12 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,535 ECC result Gain_Prime 0.000 for DET 15 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,535 ECC result Gain_Prime 0.000 for DET 16 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,536 ECC result Gain_Prime 0.000 for DET 19 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,536 ECC result Gain_Prime 0.000 for DET 21 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,536 ECC result Gain_Prime 0.000 for DET 23 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,536 ECC result Gain_Prime 0.000 for DET 26 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,536 ECC result Gain_Prime 0.000 for DET 32 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,536 ECC result Gain_Prime 0.000 for DET 32 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-09-26 09:39:22,537 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_8r47vohw'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 09:39:22,538 Error processing file /data/stix/out/test/esa_release_test3/L1/2023/02/06/CAL/solo_L1_stix-cal-energy_20230206_V01.fits Traceback (most recent call last): File "/home/nicky/STIXCore/stixcore/processing/L1toL2.py", line 91, in process_type for l2 in tmp.from_level1(l1, parent=complete_file_name, idlprocessor=idlprocessor): ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py", line 363, in from_level1 l2.data.add_column(Column(name='e_edges_actual', data=e_actual_list, File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/table/table.py", line 2446, in add_column raise ValueError("Inconsistent data column lengths") ValueError: Inconsistent data column lengths 2025-09-26 09:39:22,539 Inconsistent data column lengths 2025-09-26 09:39:22,713 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_yithqkou 2025-09-26 09:39:22,713 Read config from in: /tmp/ecc_context_ecc_cfg_1_yithqkou/post_ecc.ini 2025-09-26 09:39:23,961 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_yithqkou/solo_L1_stix-cal-energy_20230203_V01_ecc_in.fits 2025-09-26 10:00:18,653 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230203_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230203_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230203_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230203_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 10:00:19,322 Flush for 'readonly' mode is not supported. 2025-09-26 10:00:25,357 Flush for 'readonly' mode is not supported. 2025-09-26 10:00:25,368 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_yithqkou'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 10:00:25,440 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/03/CAL/solo_L2_stix-cal-energy_20230203_V02U.fits 2025-09-26 10:00:25,611 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zmiqsy7u 2025-09-26 10:00:25,612 Read config from in: /tmp/ecc_context_ecc_cfg_1_zmiqsy7u/post_ecc.ini 2025-09-26 10:00:26,843 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zmiqsy7u/solo_L1_stix-cal-energy_20230217_V01_ecc_in.fits 2025-09-26 10:21:57,131 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230217_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230217_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230217_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230217_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 10:21:57,269 Flush for 'readonly' mode is not supported. 2025-09-26 10:22:03,184 Flush for 'readonly' mode is not supported. 2025-09-26 10:22:03,195 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_zmiqsy7u'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 10:22:03,268 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/17/CAL/solo_L2_stix-cal-energy_20230217_V02U.fits 2025-09-26 10:22:03,441 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x1z27s4n 2025-09-26 10:22:03,442 Read config from in: /tmp/ecc_context_ecc_cfg_1_x1z27s4n/post_ecc.ini 2025-09-26 10:22:04,676 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x1z27s4n/solo_L1_stix-cal-energy_20230218_V01_ecc_in.fits 2025-09-26 10:43:39,382 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230218_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230218_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230218_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230218_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 10:43:40,062 Flush for 'readonly' mode is not supported. 2025-09-26 10:43:45,892 Flush for 'readonly' mode is not supported. 2025-09-26 10:43:45,901 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_x1z27s4n'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 10:43:45,972 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/18/CAL/solo_L2_stix-cal-energy_20230218_V02U.fits 2025-09-26 10:43:46,141 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_9fojnsfs 2025-09-26 10:43:46,142 Read config from in: /tmp/ecc_context_ecc_cfg_1_9fojnsfs/post_ecc.ini 2025-09-26 10:43:47,355 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_9fojnsfs/solo_L1_stix-cal-energy_20230223_V01_ecc_in.fits 2025-09-26 11:05:27,957 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230223_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230223_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230223_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230223_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 11:05:28,100 Flush for 'readonly' mode is not supported. 2025-09-26 11:05:34,312 Flush for 'readonly' mode is not supported. 2025-09-26 11:05:34,323 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_9fojnsfs'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 11:05:34,396 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/23/CAL/solo_L2_stix-cal-energy_20230223_V02U.fits 2025-09-26 11:05:34,571 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_etswepn1 2025-09-26 11:05:34,572 Read config from in: /tmp/ecc_context_ecc_cfg_1_etswepn1/post_ecc.ini 2025-09-26 11:05:35,817 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_etswepn1/solo_L1_stix-cal-energy_20230216_V01_ecc_in.fits 2025-09-26 11:26:55,184 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230216_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230216_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230216_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230216_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 11:26:55,328 Flush for 'readonly' mode is not supported. 2025-09-26 11:27:01,954 Flush for 'readonly' mode is not supported. 2025-09-26 11:27:01,965 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_etswepn1'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 11:27:02,040 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/16/CAL/solo_L2_stix-cal-energy_20230216_V02U.fits 2025-09-26 11:27:02,216 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_edpft7xr 2025-09-26 11:27:02,217 Read config from in: /tmp/ecc_context_ecc_cfg_1_edpft7xr/post_ecc.ini 2025-09-26 11:27:03,504 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_edpft7xr/solo_L1_stix-cal-energy_20230221_V01_ecc_in.fits 2025-09-26 11:48:13,444 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230221_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230221_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230221_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230221_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 11:48:13,586 Flush for 'readonly' mode is not supported. 2025-09-26 11:48:19,515 Flush for 'readonly' mode is not supported. 2025-09-26 11:48:19,526 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_edpft7xr'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 11:48:19,599 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/21/CAL/solo_L2_stix-cal-energy_20230221_V02U.fits 2025-09-26 11:48:19,770 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_06fvhh2m 2025-09-26 11:48:19,771 Read config from in: /tmp/ecc_context_ecc_cfg_1_06fvhh2m/post_ecc.ini 2025-09-26 11:48:20,995 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_06fvhh2m/solo_L1_stix-cal-energy_20230212_V01_ecc_in.fits 2025-09-26 12:10:04,700 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230212_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230212_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230212_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230212_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 12:10:04,845 Flush for 'readonly' mode is not supported. 2025-09-26 12:10:10,811 Flush for 'readonly' mode is not supported. 2025-09-26 12:10:10,822 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_06fvhh2m'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 12:10:10,898 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/12/CAL/solo_L2_stix-cal-energy_20230212_V02U.fits 2025-09-26 12:10:11,069 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_w4u1keo6 2025-09-26 12:10:11,069 Read config from in: /tmp/ecc_context_ecc_cfg_1_w4u1keo6/post_ecc.ini 2025-09-26 12:10:12,818 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_w4u1keo6/solo_L1_stix-cal-energy_20230227_V01_ecc_in.fits 2025-09-26 12:31:36,704 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230227_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230227_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230227_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230227_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 12:31:36,849 Flush for 'readonly' mode is not supported. 2025-09-26 12:31:42,845 Flush for 'readonly' mode is not supported. 2025-09-26 12:31:42,856 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_w4u1keo6'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 12:31:42,931 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/27/CAL/solo_L2_stix-cal-energy_20230227_V02U.fits 2025-09-26 12:31:43,109 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_8e8nh8bx 2025-09-26 12:31:43,110 Read config from in: /tmp/ecc_context_ecc_cfg_1_8e8nh8bx/post_ecc.ini 2025-09-26 12:31:44,328 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_8e8nh8bx/solo_L1_stix-cal-energy_20230211_V01_ecc_in.fits 2025-09-26 12:53:19,998 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230211_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230211_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230211_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230211_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 12:53:20,139 Flush for 'readonly' mode is not supported. 2025-09-26 12:53:26,314 Flush for 'readonly' mode is not supported. 2025-09-26 12:53:26,326 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_8e8nh8bx'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 12:53:26,404 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/11/CAL/solo_L2_stix-cal-energy_20230211_V02U.fits 2025-09-26 12:53:26,576 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_syp3as9u 2025-09-26 12:53:26,577 Read config from in: /tmp/ecc_context_ecc_cfg_1_syp3as9u/post_ecc.ini 2025-09-26 12:53:28,298 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_syp3as9u/solo_L1_stix-cal-energy_20230226_V01_ecc_in.fits 2025-09-26 13:15:10,912 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230226_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230226_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230226_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230226_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 13:15:11,052 Flush for 'readonly' mode is not supported. 2025-09-26 13:15:17,008 Flush for 'readonly' mode is not supported. 2025-09-26 13:15:17,019 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_syp3as9u'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 13:15:17,092 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/26/CAL/solo_L2_stix-cal-energy_20230226_V02U.fits 2025-09-26 13:15:17,262 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c303c1dn 2025-09-26 13:15:17,263 Read config from in: /tmp/ecc_context_ecc_cfg_1_c303c1dn/post_ecc.ini 2025-09-26 13:15:18,491 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c303c1dn/solo_L1_stix-cal-energy_20230219_V01_ecc_in.fits 2025-09-26 13:36:31,072 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230219_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230219_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230219_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230219_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 13:36:31,212 Flush for 'readonly' mode is not supported. 2025-09-26 13:36:37,165 Flush for 'readonly' mode is not supported. 2025-09-26 13:36:37,176 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_c303c1dn'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 13:36:37,250 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/19/CAL/solo_L2_stix-cal-energy_20230219_V02U.fits 2025-09-26 13:36:37,421 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ffrn43nz 2025-09-26 13:36:37,422 Read config from in: /tmp/ecc_context_ecc_cfg_1_ffrn43nz/post_ecc.ini 2025-09-26 13:36:38,662 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ffrn43nz/solo_L1_stix-cal-energy_20230222_V01_ecc_in.fits 2025-09-26 13:58:02,692 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230222_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230222_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230222_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230222_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 13:58:02,833 Flush for 'readonly' mode is not supported. 2025-09-26 13:58:09,191 Flush for 'readonly' mode is not supported. 2025-09-26 13:58:09,201 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_ffrn43nz'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 13:58:09,272 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/22/CAL/solo_L2_stix-cal-energy_20230222_V02U.fits 2025-09-26 13:58:09,450 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_6dshlbf5 2025-09-26 13:58:09,451 Read config from in: /tmp/ecc_context_ecc_cfg_1_6dshlbf5/post_ecc.ini 2025-09-26 13:58:10,717 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_6dshlbf5/solo_L1_stix-cal-energy_20230225_V01_ecc_in.fits 2025-09-26 14:19:33,118 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230225_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230225_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230225_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230225_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 14:19:33,261 Flush for 'readonly' mode is not supported. 2025-09-26 14:19:39,188 Flush for 'readonly' mode is not supported. 2025-09-26 14:19:39,198 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_6dshlbf5'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 14:19:39,270 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/25/CAL/solo_L2_stix-cal-energy_20230225_V02U.fits 2025-09-26 14:19:39,440 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p7fec1ej 2025-09-26 14:19:39,440 Read config from in: /tmp/ecc_context_ecc_cfg_1_p7fec1ej/post_ecc.ini 2025-09-26 14:19:40,660 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p7fec1ej/solo_L1_stix-cal-energy_20230228_V01_ecc_in.fits 2025-09-26 14:41:07,475 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230228_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230228_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230228_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230228_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 14:41:07,619 Flush for 'readonly' mode is not supported. 2025-09-26 14:41:13,967 Flush for 'readonly' mode is not supported. 2025-09-26 14:41:13,978 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_p7fec1ej'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 14:41:14,050 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/28/CAL/solo_L2_stix-cal-energy_20230228_V02U.fits 2025-09-26 14:41:14,221 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qh3ate2i 2025-09-26 14:41:14,221 Read config from in: /tmp/ecc_context_ecc_cfg_1_qh3ate2i/post_ecc.ini 2025-09-26 14:41:15,448 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qh3ate2i/solo_L1_stix-cal-energy_20230209_V01_ecc_in.fits 2025-09-26 15:02:38,864 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230209_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230209_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230209_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230209_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 15:02:39,003 Flush for 'readonly' mode is not supported. 2025-09-26 15:02:44,887 Flush for 'readonly' mode is not supported. 2025-09-26 15:02:44,898 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_qh3ate2i'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 15:02:44,970 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/09/CAL/solo_L2_stix-cal-energy_20230209_V02U.fits 2025-09-26 15:02:45,171 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_p3g60db4 2025-09-26 15:02:45,172 Read config from in: /tmp/ecc_context_ecc_cfg_1_p3g60db4/post_ecc.ini 2025-09-26 15:02:46,422 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_p3g60db4/solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits 2025-09-26 15:24:09,342 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 15:24:09,485 Flush for 'readonly' mode is not supported. 2025-09-26 15:24:15,879 Flush for 'readonly' mode is not supported. 2025-09-26 15:24:15,888 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_p3g60db4'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 15:24:15,918 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_no7dm6tq 2025-09-26 15:24:15,918 Read config from in: /tmp/ecc_context_ecc_cfg_1_no7dm6tq/post_ecc.ini 2025-09-26 15:24:17,143 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_no7dm6tq/solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits 2025-09-26 15:30:12,421 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230202_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 15:30:12,560 Flush for 'readonly' mode is not supported. 2025-09-26 15:30:19,465 Flush for 'readonly' mode is not supported. 2025-09-26 15:30:19,475 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_no7dm6tq'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 15:30:19,476 Error processing file /data/stix/out/test/esa_release_test3/L1/2023/02/02/CAL/solo_L1_stix-cal-energy_20230202_V01.fits Traceback (most recent call last): File "/home/nicky/STIXCore/stixcore/processing/L1toL2.py", line 91, in process_type for l2 in tmp.from_level1(l1, parent=complete_file_name, idlprocessor=idlprocessor): ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py", line 363, in from_level1 l2.data.add_column(Column(name='e_edges_actual', data=e_actual_list, File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/table/table.py", line 2461, in add_column self.columns[name] = col ~~~~~~~~~~~~^^^^^^ File "/home/nicky/STIXCore/venv/lib/python3.11/site-packages/astropy/table/table.py", line 292, in __setitem__ raise ValueError( ValueError: Cannot replace column 'e_edges_actual'. Use Table.replace_column() instead. 2025-09-26 15:30:19,481 Cannot replace column 'e_edges_actual'. Use Table.replace_column() instead. 2025-09-26 15:30:19,642 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5803t2yx 2025-09-26 15:30:19,643 Read config from in: /tmp/ecc_context_ecc_cfg_1_5803t2yx/post_ecc.ini 2025-09-26 15:30:20,868 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5803t2yx/solo_L1_stix-cal-energy_20230213_V01_ecc_in.fits 2025-09-26 15:51:11,574 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230213_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230213_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230213_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230213_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 15:51:11,719 Flush for 'readonly' mode is not supported. 2025-09-26 15:51:17,734 Flush for 'readonly' mode is not supported. 2025-09-26 15:51:17,744 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_5803t2yx'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 15:51:17,820 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/13/CAL/solo_L2_stix-cal-energy_20230213_V02U.fits 2025-09-26 15:51:17,990 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_62dwvsq1 2025-09-26 15:51:17,991 Read config from in: /tmp/ecc_context_ecc_cfg_1_62dwvsq1/post_ecc.ini 2025-09-26 15:51:19,725 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_62dwvsq1/solo_L1_stix-cal-energy_20230215_V01_ecc_in.fits 2025-09-26 16:12:45,709 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230215_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230215_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230215_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230215_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 16:12:45,853 Flush for 'readonly' mode is not supported. 2025-09-26 16:12:51,750 Flush for 'readonly' mode is not supported. 2025-09-26 16:12:51,761 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_62dwvsq1'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 16:12:51,834 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/15/CAL/solo_L2_stix-cal-energy_20230215_V02U.fits 2025-09-26 16:12:52,007 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_om63zlav 2025-09-26 16:12:52,008 Read config from in: /tmp/ecc_context_ecc_cfg_1_om63zlav/post_ecc.ini 2025-09-26 16:12:53,232 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_om63zlav/solo_L1_stix-cal-energy_20230204_V01_ecc_in.fits 2025-09-26 16:33:46,157 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20230204_V01_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20230204_V01_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20230204_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20230204_V01_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-09-26 16:33:46,300 Flush for 'readonly' mode is not supported. 2025-09-26 16:33:52,131 Flush for 'readonly' mode is not supported. 2025-09-26 16:33:52,141 Error cleaning up context (PosixPath('/tmp/ecc_context_ecc_cfg_1_om63zlav'), namespace(Max_Gain_Prime=1.4, Min_Gain_Prime=0.4, Min_Gain=0.4, Ignore_Max_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Prime_Det_Pix_List=[[30, 5], [30, 6]], Ignore_Min_Gain_Det_Pix_List=[[30, 5], [30, 6]])): 'tuple' object has no attribute 'exists' 2025-09-26 16:33:52,215 Writing fits file to /data/stix/out/test/esa_release_test3/L2/2023/02/04/CAL/solo_L2_stix-cal-energy_20230204_V02U.fits