2025-12-18 09:52:08,754 read rid-lut from stixcore/data/publish/rid_lut.csv 2025-12-18 09:52:10,461 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20251216_006.tm 2025-12-18 09:52:10,732 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20251218_001.tm 2025-12-18 09:52:10,732 Create SOCManager @ /data/stix/out/fits_utest/tm/processing 2025-12-18 09:52:10,739 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M93_V01.json 2025-12-18 09:52:10,799 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2025-12-18 09:52:10,799 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M91_V01.json 2025-12-18 09:52:10,800 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2025-12-18 09:52:10,801 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M22_V01.json 2025-12-18 09:52:10,802 newer version (2050) found for LTP22_Dec2025-Apr2026: replacing 2025-12-18 09:52:10,802 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V05.json 2025-12-18 09:52:10,804 newer version (3203) found for LTP21_Sep2025-Dec2025: replacing 2025-12-18 09:52:10,804 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V04.json 2025-12-18 09:52:10,805 older version (3200) found for LTP21_Sep2025-Dec2025: skipping 2025-12-18 09:52:10,805 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V03.json 2025-12-18 09:52:10,806 older version (3128) found for LTP21_Sep2025-Dec2025: skipping 2025-12-18 09:52:10,807 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V02.json 2025-12-18 09:52:10,808 older version (3048) found for LTP21_Sep2025-Dec2025: skipping 2025-12-18 09:52:10,808 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M21_V01.json 2025-12-18 09:52:10,809 older version (3038) found for LTP21_Sep2025-Dec2025: skipping 2025-12-18 09:52:10,809 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M20_V01.json 2025-12-18 09:52:10,810 newer version (754) found for LTP20_Jun2025-Sep2025: replacing 2025-12-18 09:52:10,810 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V02.json 2025-12-18 09:52:10,811 newer version (3068) found for LTP19_Mar2025-Jun2025: replacing 2025-12-18 09:52:10,812 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M19_V01.json 2025-12-18 09:52:10,813 older version (3055) found for LTP19_Mar2025-Jun2025: skipping 2025-12-18 09:52:10,813 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M18_V01.json 2025-12-18 09:52:10,813 newer version (717) found for LTP18_Dec2024-Mar2025: replacing 2025-12-18 09:52:10,814 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V02.json 2025-12-18 09:52:10,815 newer version (3107) found for LTP17_Sep2024-Dec2024: replacing 2025-12-18 09:52:10,815 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M17_V01.json 2025-12-18 09:52:10,816 older version (3093) found for LTP17_Sep2024-Dec2024: skipping 2025-12-18 09:52:10,816 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V03.json 2025-12-18 09:52:10,817 newer version (1010) found for LTP16_Jul2024-Sep2024: replacing 2025-12-18 09:52:10,817 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V02.json 2025-12-18 09:52:10,818 older version (1007) found for LTP16_Jul2024-Sep2024: skipping 2025-12-18 09:52:10,818 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M16_V01.json 2025-12-18 09:52:10,819 older version (1006) found for LTP16_Jul2024-Sep2024: skipping 2025-12-18 09:52:10,819 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V02.json 2025-12-18 09:52:10,820 newer version (2415) found for LTP15_Mar2024-Jun2024: replacing 2025-12-18 09:52:10,821 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M15_V01.json 2025-12-18 09:52:10,822 older version (2411) found for LTP15_Mar2024-Jun2024: skipping 2025-12-18 09:52:10,822 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M14_V01.json 2025-12-18 09:52:10,823 newer version (788) found for LTP14_Jan2024-Mar2024: replacing 2025-12-18 09:52:10,823 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M13_V01.json 2025-12-18 09:52:10,824 newer version (2831) found for LTP13_Sep2023-Dec2023: replacing 2025-12-18 09:52:10,824 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V02.json 2025-12-18 09:52:10,825 newer version (557) found for LTP12_Jun2023-Sep2023: replacing 2025-12-18 09:52:10,825 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M12_V01.json 2025-12-18 09:52:10,826 older version (555) found for LTP12_Jun2023-Sep2023: skipping 2025-12-18 09:52:10,826 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V02.json 2025-12-18 09:52:10,826 newer version (3082) found for LTP11_Mar2023-Jun2023: replacing 2025-12-18 09:52:10,827 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M11_V01.json 2025-12-18 09:52:10,827 older version (3026) found for LTP11_Mar2023-Jun2023: skipping 2025-12-18 09:52:10,828 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V02.json 2025-12-18 09:52:10,828 newer version (780) found for LTP10_Dec2022-Mar2023: replacing 2025-12-18 09:52:10,828 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M10_V01.json 2025-12-18 09:52:10,829 older version (754) found for LTP10_Dec2022-Mar2023: skipping 2025-12-18 09:52:10,829 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V02.json 2025-12-18 09:52:10,830 newer version (2798) found for LTP09_Sep2022-Dec2022: replacing 2025-12-18 09:52:10,830 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M09_V01.json 2025-12-18 09:52:10,831 older version (2789) found for LTP09_Sep2022-Dec2022: skipping 2025-12-18 09:52:10,831 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M08_V01.json 2025-12-18 09:52:10,832 newer version (818) found for LTP08_Jun2022-Sep2022: replacing 2025-12-18 09:52:10,832 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M07_V01.json 2025-12-18 09:52:10,833 newer version (1064) found for LTP07_Apr2022-Jun2022: replacing 2025-12-18 09:52:10,833 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V02.json 2025-12-18 09:52:10,834 newer version (2915) found for LTP06_Dec2021-Apr2022: replacing 2025-12-18 09:52:10,834 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M06_V01.json 2025-12-18 09:52:10,835 older version (2882) found for LTP06_Dec2021-Apr2022: skipping 2025-12-18 09:52:10,835 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M05_V01.json 2025-12-18 09:52:10,837 newer version (1670) found for LTP05_Sep2021-Dec2021: replacing 2025-12-18 09:52:10,837 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V02.json 2025-12-18 09:52:10,837 newer version (2584) found for LTP04_Jun2021-Sep2021: replacing 2025-12-18 09:52:10,837 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M04_V01.json 2025-12-18 09:52:10,838 older version (2575) found for LTP04_Jun2021-Sep2021: skipping 2025-12-18 09:52:10,838 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V05.json 2025-12-18 09:52:10,838 newer version (353) found for LTP03_Jan2021-Jun2021_PostSOWG: replacing 2025-12-18 09:52:10,838 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M03_V04.json 2025-12-18 09:52:10,839 older version (332) found for LTP03_Jan2021-Jun2021_PostSOWG: skipping 2025-12-18 09:52:10,839 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V05.json 2025-12-18 09:52:10,841 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2025-12-18 09:52:10,842 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V04.json 2025-12-18 09:52:10,842 newer version (580) found for LTP02_Jun2020-Dec2020_PostLaunch: replacing 2025-12-18 09:52:10,842 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V03.json 2025-12-18 09:52:10,842 older version (508) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2025-12-18 09:52:10,842 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M02_V02.json 2025-12-18 09:52:10,843 older version (394) found for LTP02_Jun2020-Dec2020_PostLaunch: skipping 2025-12-18 09:52:10,843 Read SOOP file: /data/stix/SOLSOC/from_soc/SSTX_observation_timeline_export_M01_V04.json 2025-12-18 09:52:10,843 newer version (354) found for LTP01_Jun2020-Jun2020: replacing 2025-12-18 09:52:11,117 SOOP Rebuild Index: soops: 547observations 1191 2025-12-18 09:52:27,706 PIPELINE VERSION Version: 1.2.1.dev29+gee7a179a9.d20251107 Common instrument config version: v0.1.5 PROCESSING VERSIONS Prod: Ephemeris File: /home/nicky/STIXCore/stixcore/products/ANC/aspect.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/CAL/energy.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level0/housekeepingL0.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 3 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level0/quicklookL0.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level0/scienceL0.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level1/housekeepingL1.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: EnergyCalibration File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 3 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level1/quicklookL1.py Vers: 2 Prod: RawPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: CompressedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: SummedPixelData File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Visibility File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 4 Prod: Aspect File: /home/nicky/STIXCore/stixcore/products/level1/scienceL1.py Vers: 2 Prod: MiniReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: MaxiReport File: /home/nicky/STIXCore/stixcore/products/level2/housekeepingL2.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Background File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectra File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Variance File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: TMStatusFlareList File: /home/nicky/STIXCore/stixcore/products/level2/quicklookL2.py Vers: 2 Prod: Spectrogram File: /home/nicky/STIXCore/stixcore/products/level2/scienceL2.py Vers: 2 Prod: LevelB File: /home/nicky/STIXCore/stixcore/products/levelb/binary.py Vers: 2 Prod: LightCurve File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 Prod: FlareFlag File: /home/nicky/STIXCore/stixcore/products/lowlatency/quicklookLL.py Vers: 2 2025-12-18 09:52:27,706 CONFIG [Paths] tm_archive = /data/stix/out/fits_utest/tm/processing fits_archive = /data/stix/out/test/p311_comp_test/ spice_kernels = /data/stix/spice/kernels soop_files = /data/stix/SOLSOC/from_soc fido_search_url = file:///data/stix/out/fits_v1.2.0 [Logging] stop_on_error = False [IDLBridge] enabled = True gsw_path = /opt/STIX-GSW batchsize = 30 [Pipeline] status_server_port = 12389 parallel_batchsize_l0 = 300 parallel_batchsize_l1 = 100 parallel_batchsize_l2 = 100 flareid_sdc_lut_file = ./stixcore/data/publish/flarelist_sdc_lut.csv flareid_sc_lut_file = ./stixcore/data/publish/flarelist_sc_lut.csv log_level = DEBUG log_dir = /data/stix/out/fits_utest/tm/logging error_mail_send = False error_mail_receivers = nicky.hochmuth@ateleris.ch error_mail_smpt_host = lmailer.fhnw.ch error_mail_smpt_port = 25 error_mail_sender = nicky.hochmuth@fhnw.ch start_with_unprocessed = False last_processed = TM_BatchRequest.PktTmRaw.SOL.0.2023.305.15.33.13.852.bBWz@2023.352.21.00.01.039.1.xml.out [Publish] db_file = /home/nicky/soar_pub/published.sqlite include_levels = LL03 waiting_period = 0d target_dir = /home/nicky/soar_pub/to_soc report_mail_receivers = nicky.hochmuth@ateleris.ch report_mail_send = True same_esa_name_dir = /home/nicky/soar_pub/esa_conflicts rid_lut_file = ./stixcore/data/publish/rid_lut.csv rid_lut_file_update_url = https://datacenter.stix.i4ds.net/api/bsd/info/ batch_size = 20000 fits_dir = /data/stix/out/test/esa_release_test3/ ll_waiting_period = 0d supplement_report = /home/nicky/soar_pub/supplement_report.csv include_products = ql,hk,sci,cal log_dir = /data/stix/out/fits_utest/tm/logging [SOOP] endpoint = https://solarorbiter.esac.esa.int/soopkitchen/api user = smaloney password = xxxx soop_files_download = ./stixcore/data/soop [ECC] ecc_path = /opt/stix_det_cal/bin/ [Processing] flarelist_sdc_min_count = 1000 2025-12-18 09:52:27,707 SINGLETONS SOOPManager: /data/stix/SOLSOC/from_soc RidLutManager: file: stixcore/data/publish/rid_lut.csv update: False size: 52588 SPICE: [(PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20251216_006.tm'), 'pred', datetime.datetime(2025, 12, 16, 0, 0)), (PosixPath('/data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20251218_001.tm'), 'flown', datetime.datetime(2025, 12, 18, 0, 0))] IDBManager: /home/nicky/STIXCore/stixcore/data/idb Versions: [{'label': '2.26.37', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.37', 'version': ['2', '26', '37']}, {'label': '2.26.36', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.36', 'version': ['2', '26', '36']}, {'label': '2.26.32', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.32', 'version': ['2', '26', '32']}, {'label': '2.26.34', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.34', 'version': ['2', '26', '34']}, {'label': '2.26.38', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.38', 'version': ['2', '26', '38']}, {'label': '2.26.33', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.33', 'version': ['2', '26', '33']}, {'label': '2.26.31', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.31', 'version': ['2', '26', '31']}, {'label': '2.26.35', 'path': '/home/nicky/STIXCore/stixcore/data/idb/v2.26.35', 'version': ['2', '26', '35']}] Force version: None History: IntervalTree([Interval(0.0, 640198039.0, '2.26.32'), Interval(640198039.0, 640265396.0, '2.26.31'), Interval(640265396.0, 642159993.0, '2.26.32'), Interval(642159993.0, 643123725.0, '2.26.33'), Interval(643123725.0, 677774249.0, '2.26.34'), Interval(677774249.0, 692380776.0, '2.26.35'), Interval(692380776.0, 761270182.0, '2.26.36'), Interval(761270182.0, 4294967295.0, '2.26.38')]) 2025-12-18 09:52:28,639 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-pred-mk_V111_20251216_006.tm 2025-12-18 09:52:28,910 LOADING NEW META KERNEL: /data/stix/spice/kernels/mk/solo_ANC_soc-flown-mk_V111_20251218_001.tm 2025-12-18 09:52:29,086 Successfully read ELUT file: /home/nicky/STIXCore/stixcore/config/data/common/elut/elut_table_20231019.csv 2025-12-18 09:52:29,126 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_e_wh2836 2025-12-18 09:52:29,127 Read config from in: /tmp/ecc_context_ecc_cfg_1_e_wh2836/post_ecc.ini 2025-12-18 09:52:30,452 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_e_wh2836/solo_L1_stix-cal-energy_20240210_V03U_ecc_in.fits 2025-12-18 10:15:57,706 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240210_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240210_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240210_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240210_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 10:16:05,608 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 10:16:05,627 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_e_wh2836 2025-12-18 10:16:05,675 Soop found: SOOP 2025-12-18 10:16:05,957 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_c81c38j2 2025-12-18 10:16:05,958 Read config from in: /tmp/ecc_context_ecc_cfg_1_c81c38j2/post_ecc.ini 2025-12-18 10:16:07,219 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_c81c38j2/solo_L1_stix-cal-energy_20240201_V03U_ecc_in.fits 2025-12-18 10:38:53,116 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240201_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240201_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240201_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240201_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 10:38:59,043 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 10:38:59,052 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_c81c38j2 2025-12-18 10:38:59,083 Soop found: SOOP 2025-12-18 10:38:59,313 Successfully read ELUT file: /home/nicky/STIXCore/stixcore/config/data/common/elut/elut_table_20240205.csv 2025-12-18 10:38:59,343 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_gw76kq35 2025-12-18 10:38:59,344 Read config from in: /tmp/ecc_context_ecc_cfg_1_gw76kq35/post_ecc.ini 2025-12-18 10:39:00,562 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_gw76kq35/solo_L1_stix-cal-energy_20240224_V03U_ecc_in.fits 2025-12-18 11:01:45,255 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240224_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240224_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240224_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240224_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 11:01:51,154 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 11:01:51,162 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_gw76kq35 2025-12-18 11:01:51,191 Soop found: SOOP 2025-12-18 11:01:51,439 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_1i89_uo5 2025-12-18 11:01:51,440 Read config from in: /tmp/ecc_context_ecc_cfg_1_1i89_uo5/post_ecc.ini 2025-12-18 11:01:52,658 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_1i89_uo5/solo_L1_stix-cal-energy_20240208_V03U_ecc_in.fits 2025-12-18 11:24:34,460 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240208_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240208_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240208_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240208_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 11:24:40,500 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 11:24:40,509 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_1i89_uo5 2025-12-18 11:24:40,536 Soop found: SOOP 2025-12-18 11:24:40,791 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_j3h3kgzr 2025-12-18 11:24:40,792 Read config from in: /tmp/ecc_context_ecc_cfg_1_j3h3kgzr/post_ecc.ini 2025-12-18 11:24:43,086 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_j3h3kgzr/solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits 2025-12-18 11:47:17,837 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 11:47:23,744 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 11:47:23,753 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_j3h3kgzr 2025-12-18 11:47:23,787 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_zl07cy12 2025-12-18 11:47:23,787 Read config from in: /tmp/ecc_context_ecc_cfg_1_zl07cy12/post_ecc.ini 2025-12-18 11:47:25,017 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_zl07cy12/solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits 2025-12-18 12:06:02,595 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240205_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 12:06:18,509 Run ecc post fit: replaced [94.0 %] gain offset pairs with 'better fits' 2025-12-18 12:06:18,511 ECC result Gain_Prime 0.0 for DET 1 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,512 ECC result Gain_Prime 0.0 for DET 6 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,512 ECC result Gain_Prime 0.0 for DET 7 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,512 ECC result Gain_Prime 0.0 for DET 7 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,512 ECC result Gain_Prime 0.0 for DET 8 PIX 3 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,512 ECC result Gain_Prime 0.0 for DET 9 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,512 ECC result Gain_Prime 0.0 for DET 9 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,512 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 12 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 16 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 18 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 19 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 19 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 21 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 22 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 23 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 25 PIX 11 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,513 ECC result Gain_Prime 0.0 for DET 26 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,514 ECC result Gain_Prime 0.0 for DET 30 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,514 ECC result Gain_Prime 0.0 for DET 30 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,514 ECC result Gain_Prime 0.0 for DET 31 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,514 ECC result Gain_Prime 0.0 for DET 32 PIX 7 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,514 ECC result Gain_Prime 0.0 for DET 32 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 12:06:18,519 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_zl07cy12 2025-12-18 12:06:18,548 Soop found: SOOP 2025-12-18 12:06:18,548 Soop found: SOOP 2025-12-18 12:06:18,678 Soop found: SOOP 2025-12-18 12:06:18,953 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ox7ogxp_ 2025-12-18 12:06:18,954 Read config from in: /tmp/ecc_context_ecc_cfg_1_ox7ogxp_/post_ecc.ini 2025-12-18 12:06:20,186 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ox7ogxp_/solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits 2025-12-18 12:31:24,812 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 12:31:30,971 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 12:31:30,980 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ox7ogxp_ 2025-12-18 12:31:31,031 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_x2wwwf74 2025-12-18 12:31:31,031 Read config from in: /tmp/ecc_context_ecc_cfg_1_x2wwwf74/post_ecc.ini 2025-12-18 12:31:32,286 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_x2wwwf74/solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits 2025-12-18 12:53:48,181 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 12:53:55,550 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 12:53:55,557 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_x2wwwf74 2025-12-18 12:53:55,593 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_r_ykl9vt 2025-12-18 12:53:55,593 Read config from in: /tmp/ecc_context_ecc_cfg_1_r_ykl9vt/post_ecc.ini 2025-12-18 12:53:56,817 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_r_ykl9vt/solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits 2025-12-18 13:14:51,022 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240214_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 13:14:57,413 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2025-12-18 13:14:57,415 ECC result Gain_Prime 0.0 for DET 18 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 13:14:57,421 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_r_ykl9vt 2025-12-18 13:14:57,450 Soop found: SOOP 2025-12-18 13:14:57,581 Soop found: SOOP 2025-12-18 13:14:57,706 Soop found: SOOP 2025-12-18 13:14:57,946 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_blu47ncq 2025-12-18 13:14:57,947 Read config from in: /tmp/ecc_context_ecc_cfg_1_blu47ncq/post_ecc.ini 2025-12-18 13:14:59,161 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_blu47ncq/solo_L1_stix-cal-energy_20240207_V03U_ecc_in.fits 2025-12-18 13:37:50,334 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240207_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240207_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240207_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240207_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 13:37:56,679 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 13:37:56,688 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_blu47ncq 2025-12-18 13:37:56,716 Soop found: SOOP 2025-12-18 13:37:56,980 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_79anypem 2025-12-18 13:37:56,980 Read config from in: /tmp/ecc_context_ecc_cfg_1_79anypem/post_ecc.ini 2025-12-18 13:37:58,218 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_79anypem/solo_L1_stix-cal-energy_20240220_V03U_ecc_in.fits 2025-12-18 14:00:56,493 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240220_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240220_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240220_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240220_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 14:01:02,475 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 14:01:02,484 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_79anypem 2025-12-18 14:01:02,513 Soop found: SOOP 2025-12-18 14:01:02,804 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_sdbfj7w3 2025-12-18 14:01:02,805 Read config from in: /tmp/ecc_context_ecc_cfg_1_sdbfj7w3/post_ecc.ini 2025-12-18 14:01:04,083 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_sdbfj7w3/solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits 2025-12-18 14:21:53,626 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 14:22:01,241 Run ecc post fit: replaced [98.7 %] gain offset pairs with 'better fits' 2025-12-18 14:22:01,243 ECC result Gain_Prime 0.0 for DET 5 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 14:22:01,243 ECC result Gain_Prime 0.0 for DET 9 PIX 9 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 14:22:01,243 ECC result Gain_Prime 0.0 for DET 23 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 14:22:01,244 ECC result Gain_Prime 0.0 for DET 27 PIX 10 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 14:22:01,244 ECC result Gain_Prime 0.0 for DET 29 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 14:22:01,249 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_sdbfj7w3 2025-12-18 14:22:01,282 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_5n5_hv0y 2025-12-18 14:22:01,282 Read config from in: /tmp/ecc_context_ecc_cfg_1_5n5_hv0y/post_ecc.ini 2025-12-18 14:22:02,511 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_5n5_hv0y/solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits 2025-12-18 14:44:32,764 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240206_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 14:44:38,718 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 14:44:38,726 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_5n5_hv0y 2025-12-18 14:44:38,753 Soop found: SOOP 2025-12-18 14:44:38,880 Soop found: SOOP 2025-12-18 14:44:38,880 Soop found: SOOP 2025-12-18 14:44:39,130 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_no47fbv6 2025-12-18 14:44:39,131 Read config from in: /tmp/ecc_context_ecc_cfg_1_no47fbv6/post_ecc.ini 2025-12-18 14:44:40,362 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_no47fbv6/solo_L1_stix-cal-energy_20240203_V03U_ecc_in.fits 2025-12-18 15:07:14,280 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240203_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240203_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240203_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240203_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 15:07:20,782 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 15:07:20,791 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_no47fbv6 2025-12-18 15:07:20,819 Soop found: SOOP 2025-12-18 15:07:21,078 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_67hsnvp_ 2025-12-18 15:07:21,079 Read config from in: /tmp/ecc_context_ecc_cfg_1_67hsnvp_/post_ecc.ini 2025-12-18 15:07:22,322 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_67hsnvp_/solo_L1_stix-cal-energy_20240217_V03U_ecc_in.fits 2025-12-18 15:30:03,325 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240217_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240217_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240217_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240217_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 15:30:09,258 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2025-12-18 15:30:09,266 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_67hsnvp_ 2025-12-18 15:30:09,292 Soop found: SOOP 2025-12-18 15:30:09,549 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_7z_5o0ws 2025-12-18 15:30:09,550 Read config from in: /tmp/ecc_context_ecc_cfg_1_7z_5o0ws/post_ecc.ini 2025-12-18 15:30:11,773 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_7z_5o0ws/solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits 2025-12-18 15:53:02,062 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 15:53:07,948 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 15:53:07,956 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_7z_5o0ws 2025-12-18 15:53:07,992 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_25nxmcwe 2025-12-18 15:53:07,993 Read config from in: /tmp/ecc_context_ecc_cfg_1_25nxmcwe/post_ecc.ini 2025-12-18 15:53:09,257 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_25nxmcwe/solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits 2025-12-18 16:15:19,866 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240218_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 16:15:26,160 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 16:15:26,169 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_25nxmcwe 2025-12-18 16:15:26,195 Soop found: SOOP 2025-12-18 16:15:26,322 Soop found: SOOP 2025-12-18 16:15:26,322 Soop found: SOOP 2025-12-18 16:15:26,843 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_77_mhhmv 2025-12-18 16:15:26,843 Read config from in: /tmp/ecc_context_ecc_cfg_1_77_mhhmv/post_ecc.ini 2025-12-18 16:15:28,087 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_77_mhhmv/solo_L1_stix-cal-energy_20240223_V03U_ecc_in.fits 2025-12-18 16:38:05,521 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240223_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240223_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240223_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240223_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 16:38:11,475 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 16:38:11,484 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_77_mhhmv 2025-12-18 16:38:11,511 Soop found: SOOP 2025-12-18 16:38:11,768 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_msc5xp51 2025-12-18 16:38:11,768 Read config from in: /tmp/ecc_context_ecc_cfg_1_msc5xp51/post_ecc.ini 2025-12-18 16:38:12,993 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_msc5xp51/solo_L1_stix-cal-energy_20240216_V03U_ecc_in.fits 2025-12-18 17:01:13,825 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240216_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240216_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240216_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240216_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 17:01:19,904 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 17:01:19,911 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_msc5xp51 2025-12-18 17:01:19,938 Soop found: SOOP 2025-12-18 17:01:20,190 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_3tyxcrkz 2025-12-18 17:01:20,191 Read config from in: /tmp/ecc_context_ecc_cfg_1_3tyxcrkz/post_ecc.ini 2025-12-18 17:01:22,477 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_3tyxcrkz/solo_L1_stix-cal-energy_20240221_V03U_ecc_in.fits 2025-12-18 17:24:43,951 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240221_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240221_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240221_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240221_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 17:24:49,890 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 17:24:49,898 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_3tyxcrkz 2025-12-18 17:24:49,925 Soop found: SOOP 2025-12-18 17:24:50,173 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_ki7pvtx8 2025-12-18 17:24:50,173 Read config from in: /tmp/ecc_context_ecc_cfg_1_ki7pvtx8/post_ecc.ini 2025-12-18 17:24:51,390 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_ki7pvtx8/solo_L1_stix-cal-energy_20240212_V03U_ecc_in.fits 2025-12-18 17:47:42,208 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240212_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240212_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240212_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240212_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 17:47:48,149 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 17:47:48,157 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_ki7pvtx8 2025-12-18 17:47:48,184 Soop found: SOOP 2025-12-18 17:47:48,433 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_o_5cyc2l 2025-12-18 17:47:48,434 Read config from in: /tmp/ecc_context_ecc_cfg_1_o_5cyc2l/post_ecc.ini 2025-12-18 17:47:49,657 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_o_5cyc2l/solo_L1_stix-cal-energy_20240227_V03U_ecc_in.fits 2025-12-18 18:11:26,032 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240227_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240227_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240227_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240227_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 18:11:32,092 Run ecc post fit: replaced [99.7 %] gain offset pairs with 'better fits' 2025-12-18 18:11:32,094 ECC result Gain_Prime 0.0 for DET 11 PIX 8 falls below Min_Gain_Prime 0.4, but not in ignore list 2025-12-18 18:11:32,102 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_o_5cyc2l 2025-12-18 18:11:32,132 Soop found: SOOP 2025-12-18 18:11:32,390 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_l_2ooyxw 2025-12-18 18:11:32,391 Read config from in: /tmp/ecc_context_ecc_cfg_1_l_2ooyxw/post_ecc.ini 2025-12-18 18:11:33,613 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_l_2ooyxw/solo_L1_stix-cal-energy_20240211_V03U_ecc_in.fits 2025-12-18 18:34:36,426 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240211_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240211_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240211_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240211_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 18:34:43,336 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 18:34:43,344 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_l_2ooyxw 2025-12-18 18:34:43,367 Soop found: SOOP 2025-12-18 18:34:43,367 Soop found: SOOP 2025-12-18 18:34:43,614 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_xf5yc7yg 2025-12-18 18:34:43,615 Read config from in: /tmp/ecc_context_ecc_cfg_1_xf5yc7yg/post_ecc.ini 2025-12-18 18:34:44,829 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_xf5yc7yg/solo_L1_stix-cal-energy_20240226_V03U_ecc_in.fits 2025-12-18 18:57:45,572 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240226_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240226_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240226_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240226_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 18:57:51,486 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 18:57:51,495 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_xf5yc7yg 2025-12-18 18:57:51,522 Soop found: SOOP 2025-12-18 18:57:51,522 Soop found: SOOP 2025-12-18 18:57:51,751 Error processing file /data/stix/out/test/p311_comp_test/L1/2024/02/19/CAL/solo_L1_stix-cal-energy_20240219_V03U.fits Traceback (most recent call last): File "/home/nicky/STIXCore/stixcore/processing/L1toL2.py", line 102, in process_type for l2 in tmp.from_level1(l1, parent=complete_file_name, idlprocessor=idlprocessor): ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/stixcore/products/CAL/energy.py", line 99, in from_level1 ob_elut, sci_channels = ELUTManager.instance.get_elut(date) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/stixcore/calibration/elut_manager.py", line 132, in get_elut elut_file = self._find_elut_file(date) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nicky/STIXCore/stixcore/calibration/elut_manager.py", line 69, in _find_elut_file raise ValueError(f"No ELUT for for date {date}") ValueError: No ELUT for for date 2024-02-19 00:07:24.970603 2025-12-18 18:57:51,754 No ELUT for for date 2024-02-19 00:07:24.970603 2025-12-18 18:57:51,887 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_qrz78om4 2025-12-18 18:57:51,888 Read config from in: /tmp/ecc_context_ecc_cfg_1_qrz78om4/post_ecc.ini 2025-12-18 18:57:53,111 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_qrz78om4/solo_L1_stix-cal-energy_20240222_V03U_ecc_in.fits 2025-12-18 19:20:31,781 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240222_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240222_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240222_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240222_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 19:20:37,673 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 19:20:37,681 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_qrz78om4 2025-12-18 19:20:37,706 Soop found: SOOP 2025-12-18 19:20:37,954 Created ECC context in: /tmp/ecc_context_ecc_cfg_1__z02qdnw 2025-12-18 19:20:37,954 Read config from in: /tmp/ecc_context_ecc_cfg_1__z02qdnw/post_ecc.ini 2025-12-18 19:20:39,177 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1__z02qdnw/solo_L1_stix-cal-energy_20240225_V03U_ecc_in.fits 2025-12-18 19:43:18,052 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240225_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240225_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240225_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240225_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 19:43:24,001 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 19:43:24,009 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1__z02qdnw 2025-12-18 19:43:24,034 Soop found: SOOP 2025-12-18 19:43:24,035 Soop found: SOOP 2025-12-18 19:43:24,289 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_cbdorsdt 2025-12-18 19:43:24,289 Read config from in: /tmp/ecc_context_ecc_cfg_1_cbdorsdt/post_ecc.ini 2025-12-18 19:43:26,491 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_cbdorsdt/solo_L1_stix-cal-energy_20240228_V03U_ecc_in.fits 2025-12-18 20:06:31,991 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240228_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240228_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240228_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240228_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 20:06:38,236 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 20:06:38,248 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_cbdorsdt 2025-12-18 20:06:38,284 Soop found: SOOP 2025-12-18 20:06:38,545 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n4t1tktu 2025-12-18 20:06:38,546 Read config from in: /tmp/ecc_context_ecc_cfg_1_n4t1tktu/post_ecc.ini 2025-12-18 20:06:39,797 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n4t1tktu/solo_L1_stix-cal-energy_20240209_V03U_ecc_in.fits 2025-12-18 20:30:40,850 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240209_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240209_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240209_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240209_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 20:30:46,783 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 20:30:46,791 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n4t1tktu 2025-12-18 20:30:46,818 Soop found: SOOP 2025-12-18 20:30:47,063 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_u2dlz_s1 2025-12-18 20:30:47,064 Read config from in: /tmp/ecc_context_ecc_cfg_1_u2dlz_s1/post_ecc.ini 2025-12-18 20:30:48,284 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_u2dlz_s1/solo_L1_stix-cal-energy_20240229_V03U_ecc_in.fits 2025-12-18 20:54:55,171 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240229_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240229_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240229_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240229_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 20:55:01,101 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 20:55:01,110 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_u2dlz_s1 2025-12-18 20:55:01,138 Soop found: SOOP 2025-12-18 20:55:01,387 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_n74xus3g 2025-12-18 20:55:01,387 Read config from in: /tmp/ecc_context_ecc_cfg_1_n74xus3g/post_ecc.ini 2025-12-18 20:55:02,663 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_n74xus3g/solo_L1_stix-cal-energy_20240202_V03U_ecc_in.fits 2025-12-18 21:17:53,231 ECC bash script executed successfully: ########################################################### ########################################################### ## Bkg ## ########################################################### ###############################################07.04.2020## Bkg is a tool to create a syntetic background spectrum. All configuration are set by the Bkg.cfg file. To plot the sepctrum use: gnuplot Bkg.plt ## reading config file...done ## BKG DATA FILES: 2 [0] STX_bkg_gamma.dat, int = 0.000000 [1] STX_bkg_proton.dat, int = 0.000000 ## BACKGROUND: none ## GAUSS: 2 [0] intensity = 0.0 center = 10.0 kev FWHM = 130.0 kev [1] intensity = 0.0 center = 55.0 kev FWHM = 50.0 kev ## FLUORESCENCE SOURCES: 0 ## SPECTRUM: start = 0.0 keV, stop = 200.0 keV, width = 0.10 keV output saved to Bkg.dat ############################################################# ############################################################# ## ## ## ////// ///// ///// ## ## // /// /// ## ## ////// /// /// ## ## // /// /// ## ## ////// //// //// ## ## ## ############################################################# ############################################################# f: obs=solo_L1_stix-cal-energy_20240202_V03U_ecc_in.fits syn=SynSpec.dat bsyn=1 cmap=-1 nbr of parameters = 2 a: +200.00 <= offset < +260.00, dif= 1.00 -> 0.0041 b: +2.20 <= gain < +2.50, dif= 0.01 -> 0.0000 z: frac0=0.65, frac=0.55 nbr=6, expansion=1 norm=1.000000 m: y-scale=1 (lin) goc=1 (cor) nbr_cores requested=4 File: SynSpec.dat exist. File: solo_L1_stix-cal-energy_20240202_V03U_ecc_in.fits exist. Output file 'ECC_spec.fits' does not exist. Create output file... Output file 'ECC_para.fits' does not exist. Create output file... Input file 'solo_L1_stix-cal-energy_20240202_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL syn_spec: length=1850; obs_spec: length=1024, channels=384 Input file 'solo_L1_stix-cal-energy_20240202_V03U_ecc_in.fits': Number of HDUs in total: 2 working in HDU 2 - type: BINARY_TBL Number of rows = 1024 Number of cols = 387 starting calibration: run calibration: ................................................................................................................................................................................................................................................................................................................................................................................................ done write binary table... write binary table done. ########################## ECC end ############################ ---------------------------------------------------------------- ####################### STX_Calib ##21.03.2020################## ---------------------------------------------------------------- input file 'spec_all.fits' found. HDU is not defined -> go to HDU=2 (index = 1) Input file 'ECC_para.fits[1]': Number of HDUs in total: 2 working in HDU 2 (index 1) - type: BINARY_TBL linear mode checking output file... Output file 'spec_all_erg.fits' does not exist. Creating output file... Output file 'spec_all_pel.fits' does not exist. Creating output file... 2025-12-18 21:17:59,186 Run ecc post fit: replaced [100.0 %] gain offset pairs with 'better fits' 2025-12-18 21:17:59,195 Cleaned up ECC context: /tmp/ecc_context_ecc_cfg_1_n74xus3g 2025-12-18 21:17:59,222 Soop found: SOOP 2025-12-18 21:17:59,470 Created ECC context in: /tmp/ecc_context_ecc_cfg_1_kmxgrwyi 2025-12-18 21:17:59,471 Read config from in: /tmp/ecc_context_ecc_cfg_1_kmxgrwyi/post_ecc.ini 2025-12-18 21:18:01,688 Energy calibration data in ECC format written to /tmp/ecc_context_ecc_cfg_1_kmxgrwyi/solo_L1_stix-cal-energy_20240213_V03U_ecc_in.fits